Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
For the media patches for Kernel v3.11.
This series contain:
- new i2c video drivers: ml86v7667 (video decoder),
ths8200 (video encoder);
- a new video driver for EasyCap cards based on Fushicai USBTV007;
- Improved support for OF and embedded systems, with V4L2 async
initialization and a better support for clocks;
- API cleanups on the ioctls used by the v4l2 debug tool;
- Lots of cleanups;
- As usual, several driver improvements and new cards additions.
Thanks!
Mauro
-
The following changes since commit 8bb495e3f02401ee6f76d1b1d77f3ac9f079e376:
Linux 3.10 (2013-06-30 15:13:29 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
for you to fetch changes up to 253046e67443c6e7f891cad21d945c30b2e5e60c:
Merge branch 'patchwork' into v4l_for_linus (2013-07-01 07:37:47 -0300)
----------------------------------------------------------------
Al Viro (1):
[media] videobuf_vm_{open,close} race fixes
Alessandro Miceli (2):
[media] Add support for 'Digital Dual TV Receiver CTVDIGDUAL v2
[media] Add support for Crypto Redi PC50A device (rtl2832u + FC0012 tuner)
Alexey Khoroshilov (5):
[media] wl128x: do not call copy_to_user() while holding spinlocks
[media] staging/media: lirc_imon: fix leaks in imon_probe()
[media] usbvision-video: fix memory leak of alt_max_pkt_size
[media] go7007: fix return 0 for unsupported devices in go7007_usb_probe()
[media] ttusb-budget: fix memory leak in ttusb_probe()
Andrzej Hajda (1):
[media] media: Rename media_entity_remote_source to media_entity_remote_pad
Antti Palosaari (11):
[media] af9035: implement I2C adapter read operation
[media] af9035: make checkpatch.pl happy!
[media] af9035: minor log writing changes
[media] af9035: correct TS mode handling
[media] rtl28xxu: reimplement rtl2832u remote controller
[media] rtl28xxu: remove redundant IS_ENABLED macro
[media] rtl28xxu: correct some device names
[media] rtl28xxu: map remote for TerraTec Cinergy T Stick Black
[media] rtl28xxu: use masked reg write where possible
[media] rtl28xxu: correct latest device name
[media] radio-keene: add delay in order to settle hardware
Arnd Bergmann (1):
[media] omap3isp: include linux/mm_types.h
Dan Carpenter (1):
[media] media: info leak in __media_device_enum_links()
Emil Goode (1):
[media] saa7134: Fix sparse warnings by adding __user annotation
Frank Schaefer (4):
[media] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84
[media] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions
[media] em28xx: move snapshot button bit definition for reg 0x0C from em28xx-input.c to em28xx.h
[media] em28xx: remove GPIO register caching
Geert Uytterhoeven (1):
[media] dib8000: Fix dib8000_set_frontend() never setting ret
Gianluca Gennari (4):
[media] r820t: do not double-free fe->tuner_priv in r820t_release()
[media] r820t: remove redundant initializations in r820t_attach()
[media] r820t: avoid potential memcpy buffer overflow in shadow_store()
[media] r820t: fix imr calibration
Guennadi Liakhovetski (29):
[media] mt9p031: Power down the sensor if no supported device has been detected
[media] V4L2: soc-camera: remove unneeded include path
[media] soc-camera: move common code to soc_camera.c
[media] soc-camera: add host clock callbacks to start and stop the master clock
[media] pxa-camera: move interface activation and deactivation to clock callbacks
[media] omap1-camera: move interface activation and deactivation to clock callbacks
[media] atmel-isi: move interface activation and deactivation to clock callbacks
[media] mx3-camera: move interface activation and deactivation to clock callbacks
[media] mx2-camera: move interface activation and deactivation to clock callbacks
[media] mx1-camera: move interface activation and deactivation to clock callbacks
[media] sh-mobile-ceu-camera: move interface activation and deactivation to clock callbacks
[media] soc-camera: make .clock_{start,stop} compulsory, .add / .remove optional
[media] soc-camera: don't attach the client to the host during probing
[media] sh-mobile-ceu-camera: add primitive OF support
[media] sh-mobile-ceu-driver: support max width and height in DT
[media] V4L2: add temporary clock helpers
[media] V4L2: add a device pointer to struct v4l2_subdev
[media] V4L2: support asynchronous subdevice registration
[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk
[media] soc-camera: add V4L2-async support
[media] sh_mobile_ceu_camera: add asynchronous subdevice probing support
[media] imx074: support asynchronous probing
[media] V4L2: sh_vou: add I2C build dependency
[media] V4L2: fix compilation if CONFIG_I2C is undefined
[media] V4L2: soc-camera: fix uninitialised use compiler warning
[media] V4L2: add documentation for V4L2 clock helpers and asynchronous probing
[media] V4L2: sh_mobile_ceu_camera: remove CEU specific data from generic functions
[media] V4L2: soc-camera: move generic functions into a separate file
[media] V4L2: soc-camera: remove several CEU references in the generic scaler
Hans Verkuil (121):
[media] bttv: Add Adlink MPG24 entry to the bttv cardlist
[media] CARDLIST.bttv: add new cards
[media] bw-qcam: fix timestamp handling
[media] hdpvr: fix querystd 'unknown format' return
[media] hdpvr: code cleanup
[media] hdpvr: improve error handling
[media] ml86v7667: fix the querystd implementation
[media] radio-keene: set initial frequency
[media] v4l2-ioctl: dbg_g/s_register: only match BRIDGE and SUBDEV types
[media] v4l2: remove g_chip_ident from bridge drivers where it is easy to do so
[media] cx18: remove g_chip_ident support
[media] saa7115: add back the dropped 'found' message
[media] ivtv: remove g_chip_ident
[media] cx23885: remove g_chip_ident
[media] saa6752hs: drop obsolete g_chip_ident
[media] gspca: remove g_chip_ident
[media] cx231xx: remove g_chip_ident
[media] marvell-ccic: remove g_chip_ident
[media] tveeprom: remove v4l2-chip-ident.h include
[media] au8522_decoder: remove g_chip_ident op
[media] radio: remove g_chip_ident op
[media] indycam: remove g_chip_ident op
[media] soc_camera sensors: remove g_chip_ident op
[media] media/i2c: remove g_chip_ident op
[media] cx25840: remove the v4l2-chip-ident.h include
[media] saa7134: check register address in g_register
[media] mxb: check register address when reading/writing a register
[media] vpbe_display: drop g/s_register ioctls
[media] marvell-ccic: check register address
[media] au0828: set reg->size
[media] cx231xx: the reg->size field wasn't filled in
[media] sn9c20x: the reg->size field wasn't filled in
[media] pvrusb2: drop g/s_register ioctls
[media] media/i2c: fill in missing reg->size fields
[media] cx18: fix register range check
[media] ivtv: fix register range check
[media] DocBook/media/v4l: update VIDIOC_DBG_ documentation
[media] v4l2-framework: replace g_chip_ident by g_std in the examples
[media] saa7706h: convert to the control framework
[media] sr030pc30: convert to the control framework
[media] saa6752hs: convert to the control framework
[media] radio-tea5764: add support for struct v4l2_device
[media] radio-tea5764: embed struct video_device
[media] radio-tea5764: convert to the control framework
[media] radio-tea5764: audio and input ioctls do not apply to radio devices
[media] radio-tea5764: add device_caps support
[media] radio-tea5764: add prio and control event support
[media] radio-tea5764: some cleanups and clamp frequency when out-of-range
[media] radio-timb: add device_caps support, remove input/audio ioctls
[media] radio-timb: convert to the control framework
[media] radio-timb: actually load the requested subdevs
[media] radio-timb: add control events and prio support
[media] tef6862: clamp frequency
[media] timblogiw: fix querycap
[media] radio-sf16fmi: remove audio/input ioctls
[media] radio-sf16fmi: add device_caps support to querycap
[media] radio-sf16fmi: clamp frequency
[media] radio-sf16fmi: convert to the control framework
[media] radio-sf16fmi: add control event and prio support
[media] mcam-core: replace current_norm by g_std
[media] via-camera: replace current_norm by g_std
[media] sh_vou: remove current_norm
[media] soc_camera: remove use of current_norm
[media] fsl-viu: remove current_norm
[media] tm6000: remove deprecated current_norm
[media] saa7164: replace current_norm by g_std
[media] cx23885: remove use of deprecated current_norm
[media] usbvision: replace current_norm by g_std
[media] saa7134: drop deprecated current_norm
[media] dt3155v4l: remove deprecated current_norm
[media] v4l2: remove deprecated current_norm support completely
[media] adv7183: fix querystd
[media] bt819: fix querystd
[media] ks0127: fix querystd
[media] saa7110: fix querystd
[media] saa7115: fix querystd
[media] saa7191: fix querystd
[media] tvp514x: fix querystd
[media] vpx3220: fix querystd
[media] bttv: fix querystd
[media] zoran: remove bogus autodetect mode in set_norm
[media] v4l2-ioctl: clarify querystd comment
[media] DocBook/media/v4l: clarify the QUERYSTD documentation
[media] tvp5150: fix s_std support
[media] media: i2c: ths8200: driver for TI video encoder
[media] saa7134: remove radio/type field from saa7134_fh
[media] saa7134: move the overlay fields from saa7134_fh to saa7134_dev
[media] saa7134: move fmt/width/height from saa7134_fh to saa7134_dev
[media] saa7134: move qos_request from saa7134_fh to saa7134_dev
[media] saa7134: fix format-related compliance issues
[media] saa7134: fix empress format compliance bugs
[media] ths8200: fix two compiler warnings
[media] mxl111sf: don't redefine pr_err/info/debug
[media] cx88: remove g_chip_ident
[media] v4l2: remove obsolete v4l2_chip_match_host()
[media] v4l2-common: remove unused v4l2_chip_match/ident_i2c_client functions
[media] v4l2-int-device: remove unused chip_ident reference
[media] v4l2-core: remove support for obsolete VIDIOC_DBG_G_CHIP_IDENT
[media] DocBook: remove references to the dropped VIDIOC_DBG_G_CHIP_IDENT ioctl
[media] DocBook: remove obsolete note from the dbg_g_register doc
[media] cx88: fix register mask
[media] v4l2-device: check if already unregistered
[media] soc_camera: replace vdev->parent by vdev->v4l2_dev
[media] cx23885-417: use v4l2_dev instead of the deprecated parent field
[media] zoran: use v4l2_dev instead of the deprecated parent field
[media] sn9c102_core: add v4l2_device and replace parent with v4l2_dev
[media] saa7164: add v4l2_device and replace parent with v4l2_dev
[media] pvrusb2: use v4l2_dev instead of the deprecated parent field
[media] f_uvc: add v4l2_device and replace parent with v4l2_dev
[media] omap24xxcam: add v4l2_device and replace parent with v4l2_dev
[media] saa7134: use v4l2_dev instead of the deprecated parent field
[media] v4l2: always require v4l2_dev, rename parent to dev_parent
[media] cx88: set dev_parent to the correct parent PCI bus
[media] v4l2-framework: update documentation
[media] ml86v7667: fix compiler warning
[media] bfin_capture: fix compiler warning
[media] omap_vout: fix compiler warning
[media] v4l2-controls.h: fix copy-and-paste error in comment
[media] saa7164: fix compiler warning
[media] wl128x: add missing struct v4l2_device
[media] mem2mem: set missing v4l2_dev pointer
Ismael Luceno (3):
[media] videodev2.h: Make V4L2_PIX_FMT_MPEG4 comment more specific about its usage
[media] solo6x10: Approximate frame intervals with non-standard denominator
[media] solo6x10: reimplement SAA712x setup routine
Jakob Haufe (2):
[media] rc: Add rc-delock-61959
[media] em28xx: Add support for 1b80:e1cc Delock 61959
Jakob Normark (1):
[media] Missing break statement added in smsdvb-main.c
Jean Delvare (1):
[media] sony-btf-mpx: Drop needless newline in param description
Jon Arne Jørgensen (1):
[media] saa7115: Add register setup and config for gm7113c
Joseph Salisbury (1):
[media] uvcvideo: quirk PROBE_DEF for Alienware X51 OmniVision webcam
Kamal Mostafa (1):
[media] uvcvideo: quirk PROBE_DEF for Dell Studio / OmniVision webcam
Lad, Prabhakar (31):
[media] media: davinci: vpif: remove unwanted header file inclusion
[media] media: davinci: vpif_display: move displaying of error to approppraite place
[media] media: davinci: vpbe: fix checkpatch warning for CamelCase
[media] media: i2c: tvp7002: enable TVP7002 decoder for media controller based usage
[media] videodev2.h: fix typos
[media] media: i2c: tvp7002: remove duplicate define
[media] media: i2c: tvp7002: rearrange description of structure members
[media] media: i2c: remove duplicate checks for EPERM in dbg_g/s_register
[media] media: dvb-frontends: remove duplicate checks for EPERM in dbg_g/s_register
[media] media: usb: remove duplicate checks for EPERM in vidioc_g/s_register
[media] media: pci: remove duplicate checks for EPERM
[media] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata
[media] media: i2c: ths7303: remove init_enable option from pdata
[media] media: i2c: ths7303: remove unnecessary function ths7303_setup()
[media] media: i2c: ths7303: make the pdata as a constant pointer
[media] media: i2c: mt9p031: add OF support
[media] media: davinci: vpif: remove unwanted header mach/hardware.h and sort the includes alphabetically
[media] media: davinci: vpif: Convert to devm_* api
[media] media: davinci: vpif: remove unnecessary braces around defines
[media] media: davinci: vpif_capture: move the freeing of irq and global variables to remove()
[media] media: davinci: vpif_capture: use module_platform_driver()
[media] media: davinci: vpif_capture: Convert to devm_* api
[media] media: davinci: vpif_capture: remove unnecessary loop for IRQ resource
[media] media: davinci: vpif_display: move the freeing of irq and global variables to remove()
[media] media: davinci: vpif_display: use module_platform_driver()
[media] media: davinci: vpif_display: Convert to devm_* api
[media] media: davinci: vpif_display: remove unnecessary loop for IRQ resource
[media] media: i2c: tvp514x: add OF support
[media] media: i2c: ths7303: remove unused member driver_data
[media] media: i2c: tvp7002: remove manual setting of subdev name
[media] media: i2c: tvp514x: remove manual setting of subdev name
Lars-Peter Clausen (2):
[media] media:adv7180: Use dev_pm_ops
[media] tvp514x: Fix init seqeunce
Laurent Pinchart (15):
[media] mt9p031: Use gpio_is_valid()
[media] mt9v032: Free control handler in cleanup paths
[media] tvp514x: Fix double free
[media] media: i2c: Convert to gpio_request_one()
[media] media: i2c: Convert to devm_kzalloc()
[media] media: i2c: Convert to devm_gpio_request_one()
[media] media: i2c: Convert to devm_regulator_bulk_get()
[media] m5mols: Convert to devm_request_irq()
[media] s5c73m3: Convert to devm_gpio_request_one()
[media] s5k6aa: Convert to devm_gpio_request_one()
[media] uvcvideo: Fix open/close race condition
[media] omap3isp: Defer probe when the IOMMU is not available
[media] omap3isp: ccp2: Don't ignore the regulator_enable() return value
[media] mt9p031: Use bulk regulator API
[media] uvc: Depend on VIDEO_V4L2
Leonid Kegulskiy (3):
[media] hdpvr: Removed unnecessary get_video_info() call from hdpvr_device_init()
[media] hdpvr: Added some error handling in hdpvr_start_streaming()
[media] hdpvr: Removed unnecessary use of kzalloc() in get_video_info()
Libo Chen (6):
[media] drivers/media/pci/pt1/pt1: Convert to module_pci_driver
[media] drivers/media/pci/dm1105/dm1105: Convert to module_pci_driver
[media] drivers/media/pci/mantis/hopper_cards: Convert to module_pci_driver
[media] drivers/media/pci/dm1105/dm1105: Convert to module_pci_driver
[media] drivers/media/pci/pluto2/pluto2: Convert to module_pci_driver
[media] drivers/media/pci/mantis/mantis_cards: Convert to module_pci_driver
Lubomir Rintel (1):
[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber
Mauro Carvalho Chehab (21):
Merge tag 'v3.10-rc1' into patchwork
[media] update saa7134 and tuner cardlists
[media] saa7115: move the autodetection code out of the probe function
[media] saa7115: add detection code for gm7113c
[media] videobuf-dma-contig: use vm_iomap_memory()
[media] saa7115: Don't use a dynamic array
[media] drxk_hard: don't re-implement log10
[media] drxk_hard: Don't use CamelCase
[media] drxk_hard: use pr_info/pr_warn/pr_err/... macros
[media] drxk_hard: don't split strings across lines
[media] drxk_hard: use usleep_range()
[media] drxk_hard.h: Remove some alien comment markups
[media] drxk_hard.h: don't use more than 80 columns
[media] drxk_hard: remove needless parenthesis
[media] drxk_hard: Remove most 80-cols checkpatch warnings
Properly handle tristate dependencies on USB/PCI menus
Merge branch 'linus' into patchwork
[media] pvrusb2: Remove unused variable
Merge branch 'v4l_for_linus' into patchwork
Merge tag 'v3.10' into v4l_for_linus
Merge branch 'patchwork' into v4l_for_linus
Miroslav Šustek (1):
[media] rtl28xxu: Add USB ID for Leadtek WinFast DTV Dongle mini
Ondrej Zary (4):
[media] bttv: Add noname Bt848 capture card with 14MHz xtal
[media] bttv: Add CyberVision CV06
[media] radio-sf16fmi: Add module name to bus_info
[media] radio-sf16fmi: Set frequency during init
Paul Bolle (1):
[media] soc-camera: remove two unused configs
Phil Carmody (1):
[media] exynos4-is: Simplify bitmask usage
Philipp Zabel (15):
[media] coda: v4l2-compliance fix: add bus_info prefix 'platform'
[media] coda: use devm_ioremap_resource
[media] coda: enable dmabuf support
[media] coda: set umask 0644 on debug module param
[media] coda: fix error return value if v4l2_m2m_ctx_init fails
[media] coda: do not use v4l2_dev in coda_timeout
[media] coda: fix ENC_SEQ_OPTION for CODA7
[media] coda: frame stride must be a multiple of 8
[media] coda: stop setting bytesused in buf_prepare
[media] coda: clear registers in coda_hw_init
[media] coda: simplify parameter buffer setup code
[media] coda: per-product list of codecs instead of list of formats
[media] coda: add coda_encode_header helper function
[media] coda: replace completion with mutex
[media] coda: do not call v4l2_m2m_job_finish from .job_abort
Randy Dunlap (2):
[media] media/usb: fix kconfig dependencies
[media] media: fix hdpvr kconfig/build errors
Reinhard Nissl (1):
[media] stb0899: remove commented value from IQ_SWAP_ON/OFF usages
Reinhard Nißl (7):
[media] stb0899: sign extend raw CRL_FREQ value
[media] stb0899: enable auto inversion handling unconditionally
[media] stb0899: fix inversion enum values to match usage with CFR
[media] stb0899: store successful inversion for next run
[media] stb0899: store autodetected inversion while tuning in non S2 mode
[media] stb0899: use autodetected inversion instead of configured inversion
[media] stb0899: sign of CRL_FREQ doesn't depend on inversion
Roberto Alcântara (2):
[media] smscoreapi: Make Siano firmware load more verbose
[media] smscoreapi: memory leak fix
Rodrigo Tartajo (1):
[media] rtl2832u: restore ir remote control support
Sachin Kamat (19):
[media] timblogiw: Remove redundant platform_set_drvdata()
[media] rc: gpio-ir-recv: Remove redundant platform_set_drvdata()
[media] omap3isp: Remove redundant platform_set_drvdata()
[media] s3c-camif: Staticize local symbols
[media] s3c-camif: Use dev_info instead of printk
[media] s5c73m3: Fix whitespace related warnings
[media] exynos4-is: Remove redundant NULL check in fimc-lite.c
[media] s3c-camif: Remove redundant NULL check
[media] s5p-tv: Fix incorrect usage of IS_ERR_OR_NULL in hdmi_drv.c
[media] s5p-tv: Fix incorrect usage of IS_ERR_OR_NULL in mixer_drv.c
[media] exynos-gsc: Remove redundant use of of_match_ptr macro
[media] s5p-mfc: Remove redundant use of of_match_ptr macro
[media] exynos4-is: Staticize local symbols
[media] soc_camera: Constify dev_pm_ops in mt9t031.c
[media] soc_camera: Fix checkpatch warning in ov9640.c
[media] soc_camera/sh_mobile_csi2: Remove redundant platform_set_drvdata()
[media] soc_camera_platform: Remove redundant platform_set_drvdata()
[media] soc_camera: mt9t112: Remove empty function
[media] soc_camera: tw9910: Remove empty function
Sakari Ailus (2):
[media] davinci_vpfe: Clean up media entity after unregistering subdev
[media] smiapp: Clean up media entity after unregistering subdev
Scott Jiang (2):
[media] blackfin: add display support in ppi driver
[media] bfin_capture: add query_dv_timings/enum_dv_timings support
Soeren Moch (1):
[media] media: dmxdev: remove dvb_ringbuffer_flush() on writer side
Sylwester Nawrocki (37):
[media] exynos4-is: Fix example dts in .../bindings/samsung-fimc.txt
[media] exynos4-is: Remove platform_device_id table at fimc-lite driver
[media] exynos4-is: Correct querycap ioctl handling at fimc-lite driver
[media] s5c73m3: Do not ignore errors from regulator_enable()
[media] exynos4-is: Move common functions to a separate module
[media] exynos4-is: Add struct exynos_video_entity
[media] exynos4-is: Preserve state of controls between /dev/video open/close
[media] exynos4-is: Media graph/video device locking rework
[media] exynos4-is: Do not use asynchronous runtime PM in release fop
[media] exynos4-is: Use common exynos_media_pipeline data structure
[media] exynos4-is: Remove WARN_ON() from __fimc_pipeline_close()
[media] exynos4-is: Fix sensor subdev -> FIMC notification setup
[media] exynos4-is: Add locking at fimc(-lite) subdev unregistered handler
[media] exynos4-is: Remove leftovers of non-dt FIMC-LITE support
[media] exynos4-is: Remove unused code
[media] exynos4-is: Refactor vidioc_s_fmt, vidioc_try_fmt handlers
[media] exynos4-is: Move __fimc_videoc_querycap() function to the common module
[media] exynos4-is: Add isp_dbg() macro
[media] media: Change media device link_notify behaviour
[media] exynos4-is: Extend link_notify handler to support fimc-is/lite pipelines
[media] s5p-tv: Don't ignore return value of regulator_enable() in sii9234_drv.c
[media] s5p-tv: Do not ignore regulator/clk API return values in sdo_drv.c
[media] s5p-tv: Don't ignore return value of regulator_bulk_enable() in hdmi_drv.c
[media] media: Add a function removing all links of a media entity
[media] V4L: Remove all links of the media entity when unregistering subdev
[media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platforms
[media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver
[media] exynos4-is: Add support for Exynos5250 MIPI-CSIS
[media] exynos4-is: Change fimc-is firmware file names
[media] Documentation: Update driver's directory in video4linux/fimc.txt
[media] MAINTAINERS: Update S5P/Exynos FIMC driver entry
[media] exynos4-is: Fix format propagation on FIMC-LITE.n subdevs
[media] exynos4-is: Set valid initial format at FIMC-LITE
[media] exynos4-is: Fix format propagation on FIMC-IS-ISP subdev
[media] exynos4-is: Set valid initial format on FIMC-IS-ISP subdev pads
[media] exynos4-is: Set valid initial format on FIMC.n subdevs
[media] exynos4-is: Correct colorspace handling at FIMC-LITE
Thomas Meyer (3):
[media] dma-buf: Cocci spatch "ptr_ret.spatch"
[media] pvrusb2: Cocci spatch "memdup.spatch"
[media] media: Cocci spatch "ptr_ret.spatch"
Vladimir Barinov (2):
[media] adv7180: add more subdev video ops
[media] ML86V7667: new video decoder driver
Wei Yongjun (7):
[media] v4l: vb2: fix error return code in __vb2_init_fileio()
[media] vpif_display: fix error return code in vpif_probe()
[media] vpif_capture: fix error return code in vpif_probe()
[media] ad9389b: fix error return code in ad9389b_probe()
[media] blackfin: fix error return code in bcap_probe()
[media] sta2x11_vip: fix error return code in sta2x11_vip_init_one()
[media] s5p-tv: fix error return code in mxr_acquire_video()
Zoran Turalija (2):
[media] stb0899: allow minimum symbol rate of 1000000
[media] stb0899: allow minimum symbol rate of 2000000
Documentation/DocBook/media/v4l/compat.xml | 14 +-
Documentation/DocBook/media/v4l/v4l2.xml | 11 +-
.../DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml | 271 --
.../DocBook/media/v4l/vidioc-dbg-g-chip-info.xml | 20 +-
.../DocBook/media/v4l/vidioc-dbg-g-register.xml | 64 +-
.../DocBook/media/v4l/vidioc-querystd.xml | 3 +-
.../devicetree/bindings/media/exynos-fimc-lite.txt | 6 +-
.../devicetree/bindings/media/i2c/mt9p031.txt | 40 +
.../devicetree/bindings/media/i2c/tvp514x.txt | 44 +
.../devicetree/bindings/media/samsung-fimc.txt | 26 +-
.../bindings/media/samsung-mipi-csis.txt | 4 +-
.../devicetree/bindings/media/sh_mobile_ceu.txt | 18 +
Documentation/media-framework.txt | 2 +-
Documentation/video4linux/CARDLIST.bttv | 3 +
Documentation/video4linux/CARDLIST.saa7134 | 1 +
Documentation/video4linux/CARDLIST.tuner | 6 +-
Documentation/video4linux/fimc.txt | 21 +-
Documentation/video4linux/v4l2-framework.txt | 103 +-
Documentation/zh_CN/video4linux/v4l2-framework.txt | 13 +-
MAINTAINERS | 18 +-
arch/arm/mach-davinci/board-dm365-evm.c | 1 -
drivers/base/dma-buf.c | 5 +-
drivers/media/common/saa7146/saa7146_video.c | 23 -
drivers/media/common/siano/smscoreapi.c | 23 +-
drivers/media/common/siano/smsdvb-main.c | 1 +
drivers/media/common/tveeprom.c | 142 +-
drivers/media/dvb-core/dmxdev.c | 8 +-
drivers/media/dvb-core/dvb-usb-ids.h | 2 +
drivers/media/dvb-frontends/au8522_decoder.c | 21 -
drivers/media/dvb-frontends/dib8000.c | 4 +-
drivers/media/dvb-frontends/drxk.h | 2 +-
drivers/media/dvb-frontends/drxk_hard.c | 3154 ++++++++++----------
drivers/media/dvb-frontends/drxk_hard.h | 277 +-
drivers/media/dvb-frontends/stb0899_algo.c | 105 +-
drivers/media/dvb-frontends/stb0899_drv.c | 7 +-
drivers/media/dvb-frontends/stb0899_drv.h | 5 +-
drivers/media/i2c/Kconfig | 18 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/ad9389b.c | 35 +-
drivers/media/i2c/adp1653.c | 5 +-
drivers/media/i2c/adv7170.c | 16 +-
drivers/media/i2c/adv7175.c | 12 +-
drivers/media/i2c/adv7180.c | 79 +-
drivers/media/i2c/adv7183.c | 80 +-
drivers/media/i2c/adv7343.c | 10 -
drivers/media/i2c/adv7393.c | 18 +-
drivers/media/i2c/adv7604.c | 33 +-
drivers/media/i2c/ak881x.c | 39 +-
drivers/media/i2c/as3645a.c | 7 +-
drivers/media/i2c/bt819.c | 26 +-
drivers/media/i2c/bt856.c | 12 +-
drivers/media/i2c/bt866.c | 16 +-
drivers/media/i2c/cs5345.c | 25 +-
drivers/media/i2c/cs53l32a.c | 14 +-
drivers/media/i2c/cx25840/cx25840-core.c | 72 +-
drivers/media/i2c/cx25840/cx25840-core.h | 34 +-
drivers/media/i2c/cx25840/cx25840-ir.c | 7 +-
drivers/media/i2c/ir-kbd-i2c.c | 10 +-
drivers/media/i2c/ks0127.c | 36 +-
drivers/media/i2c/m52790.c | 22 +-
drivers/media/i2c/m5mols/m5mols_core.c | 43 +-
drivers/media/i2c/ml86v7667.c | 431 +++
drivers/media/i2c/msp3400-driver.c | 15 +-
drivers/media/i2c/mt9m032.c | 13 +-
drivers/media/i2c/mt9p031.c | 87 +-
drivers/media/i2c/mt9t001.c | 4 +-
drivers/media/i2c/mt9v011.c | 34 +-
drivers/media/i2c/mt9v032.c | 8 +-
drivers/media/i2c/noon010pc30.c | 41 +-
drivers/media/i2c/ov7640.c | 6 +-
drivers/media/i2c/ov7670.c | 26 +-
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 88 +-
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 4 +-
drivers/media/i2c/s5k6aa.c | 73 +-
drivers/media/i2c/saa6588.c | 19 +-
drivers/media/i2c/saa7110.c | 17 +-
drivers/media/i2c/saa7115.c | 297 +-
drivers/media/i2c/saa7127.c | 55 +-
drivers/media/i2c/saa717x.c | 16 +-
drivers/media/i2c/saa7185.c | 12 +-
drivers/media/i2c/saa7191.c | 28 +-
drivers/media/i2c/smiapp/smiapp-core.c | 20 +-
drivers/media/i2c/soc_camera/imx074.c | 51 +-
drivers/media/i2c/soc_camera/mt9m001.c | 50 +-
drivers/media/i2c/soc_camera/mt9m111.c | 53 +-
drivers/media/i2c/soc_camera/mt9t031.c | 54 +-
drivers/media/i2c/soc_camera/mt9t112.c | 35 +-
drivers/media/i2c/soc_camera/mt9v022.c | 64 +-
drivers/media/i2c/soc_camera/ov2640.c | 35 +-
drivers/media/i2c/soc_camera/ov5642.c | 39 +-
drivers/media/i2c/soc_camera/ov6650.c | 29 +-
drivers/media/i2c/soc_camera/ov772x.c | 31 +-
drivers/media/i2c/soc_camera/ov9640.c | 35 +-
drivers/media/i2c/soc_camera/ov9640.h | 1 +
drivers/media/i2c/soc_camera/ov9740.c | 35 +-
drivers/media/i2c/soc_camera/rj54n1cb0c.c | 48 +-
drivers/media/i2c/soc_camera/tw9910.c | 33 +-
drivers/media/i2c/sony-btf-mpx.c | 5 +-
drivers/media/i2c/sr030pc30.c | 280 +-
drivers/media/i2c/tda7432.c | 4 +-
drivers/media/i2c/tda9840.c | 16 +-
drivers/media/i2c/tea6415c.c | 16 +-
drivers/media/i2c/tea6420.c | 16 +-
drivers/media/i2c/ths7303.c | 81 +-
drivers/media/i2c/ths8200.c | 556 ++++
drivers/media/i2c/ths8200_regs.h | 161 +
drivers/media/i2c/tlv320aic23b.c | 4 +-
drivers/media/i2c/tvaudio.c | 14 +-
drivers/media/i2c/tvp514x.c | 87 +-
drivers/media/i2c/tvp5150.c | 50 +-
drivers/media/i2c/tvp7002.c | 143 +-
drivers/media/i2c/tw2804.c | 6 +-
drivers/media/i2c/tw9903.c | 5 +-
drivers/media/i2c/tw9906.c | 5 +-
drivers/media/i2c/uda1342.c | 3 +-
drivers/media/i2c/upd64031a.c | 24 +-
drivers/media/i2c/upd64083.c | 24 +-
drivers/media/i2c/vp27smpx.c | 12 +-
drivers/media/i2c/vpx3220.c | 29 +-
drivers/media/i2c/vs6624.c | 46 +-
drivers/media/i2c/wm8739.c | 13 +-
drivers/media/i2c/wm8775.c | 13 +-
drivers/media/media-device.c | 3 +
drivers/media/media-entity.c | 81 +-
drivers/media/parport/bw-qcam.c | 2 +
drivers/media/pci/Kconfig | 4 +-
drivers/media/pci/b2c2/flexcop-pci.c | 13 +-
drivers/media/pci/bt8xx/bttv-cards.c | 52 +-
drivers/media/pci/bt8xx/bttv-driver.c | 48 +-
drivers/media/pci/bt8xx/bttv.h | 4 +
drivers/media/pci/cx18/cx18-av-core.c | 36 -
drivers/media/pci/cx18/cx18-av-core.h | 1 -
drivers/media/pci/cx18/cx18-ioctl.c | 82 +-
drivers/media/pci/cx23885/cx23885-417.c | 9 +-
drivers/media/pci/cx23885/cx23885-ioctl.c | 145 +-
drivers/media/pci/cx23885/cx23885-ioctl.h | 4 +-
drivers/media/pci/cx23885/cx23885-video.c | 9 +-
drivers/media/pci/cx23885/cx23888-ir.c | 31 -
drivers/media/pci/cx88/cx88-cards.c | 12 +-
drivers/media/pci/cx88/cx88-core.c | 7 +
drivers/media/pci/cx88/cx88-video.c | 25 +-
drivers/media/pci/cx88/cx88.h | 8 +-
drivers/media/pci/dm1105/dm1105.c | 13 +-
drivers/media/pci/ivtv/ivtv-driver.c | 8 +-
drivers/media/pci/ivtv/ivtv-ioctl.c | 45 +-
drivers/media/pci/mantis/hopper_cards.c | 13 +-
drivers/media/pci/mantis/mantis_cards.c | 13 +-
drivers/media/pci/mantis/mantis_vp1041.c | 2 +-
drivers/media/pci/pluto2/pluto2.c | 13 +-
drivers/media/pci/pt1/pt1.c | 15 +-
drivers/media/pci/saa7134/saa6752hs.c | 525 +---
drivers/media/pci/saa7134/saa7134-empress.c | 33 +-
drivers/media/pci/saa7134/saa7134-video.c | 260 +-
drivers/media/pci/saa7134/saa7134.h | 17 +-
drivers/media/pci/saa7146/mxb.c | 23 +-
drivers/media/pci/saa7164/saa7164-core.c | 8 +
drivers/media/pci/saa7164/saa7164-encoder.c | 58 +-
drivers/media/pci/saa7164/saa7164-vbi.c | 24 +-
drivers/media/pci/saa7164/saa7164.h | 5 +-
drivers/media/pci/sta2x11/sta2x11_vip.c | 3 +-
drivers/media/pci/ttpci/budget-av.c | 2 +-
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/pci/zoran/zoran_card.c | 2 +-
drivers/media/pci/zoran/zoran_driver.c | 23 -
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/blackfin/bfin_capture.c | 81 +-
drivers/media/platform/blackfin/ppi.c | 12 +
drivers/media/platform/coda.c | 635 ++--
drivers/media/platform/coda.h | 11 +-
drivers/media/platform/davinci/vpbe_display.c | 31 +-
drivers/media/platform/davinci/vpbe_osd.c | 24 +-
drivers/media/platform/davinci/vpif.c | 45 +-
drivers/media/platform/davinci/vpif_capture.c | 160 +-
drivers/media/platform/davinci/vpif_capture.h | 5 +-
drivers/media/platform/davinci/vpif_display.c | 153 +-
drivers/media/platform/davinci/vpif_display.h | 5 +-
drivers/media/platform/exynos-gsc/gsc-core.c | 2 +-
drivers/media/platform/exynos4-is/Kconfig | 7 +-
drivers/media/platform/exynos4-is/Makefile | 5 +-
drivers/media/platform/exynos4-is/common.c | 53 +
drivers/media/platform/exynos4-is/common.h | 16 +
drivers/media/platform/exynos4-is/fimc-capture.c | 412 +--
drivers/media/platform/exynos4-is/fimc-core.c | 11 -
drivers/media/platform/exynos4-is/fimc-core.h | 15 +-
drivers/media/platform/exynos4-is/fimc-is-i2c.c | 2 +-
drivers/media/platform/exynos4-is/fimc-is-param.c | 84 +-
drivers/media/platform/exynos4-is/fimc-is-regs.c | 4 +-
drivers/media/platform/exynos4-is/fimc-is.c | 12 +-
drivers/media/platform/exynos4-is/fimc-is.h | 12 +-
drivers/media/platform/exynos4-is/fimc-isp.c | 130 +-
drivers/media/platform/exynos4-is/fimc-isp.h | 21 +-
drivers/media/platform/exynos4-is/fimc-lite-reg.c | 55 +-
drivers/media/platform/exynos4-is/fimc-lite-reg.h | 10 +-
drivers/media/platform/exynos4-is/fimc-lite.c | 321 +-
drivers/media/platform/exynos4-is/fimc-lite.h | 35 +-
drivers/media/platform/exynos4-is/fimc-m2m.c | 1 +
drivers/media/platform/exynos4-is/fimc-reg.c | 7 +-
drivers/media/platform/exynos4-is/media-dev.c | 272 +-
drivers/media/platform/exynos4-is/media-dev.h | 54 +-
drivers/media/platform/exynos4-is/mipi-csis.c | 67 +-
drivers/media/platform/fsl-viu.c | 2 +-
drivers/media/platform/indycam.c | 12 -
drivers/media/platform/m2m-deinterlace.c | 1 +
drivers/media/platform/marvell-ccic/cafe-driver.c | 4 +-
drivers/media/platform/marvell-ccic/mcam-core.c | 67 +-
drivers/media/platform/marvell-ccic/mcam-core.h | 9 +-
drivers/media/platform/marvell-ccic/mmp-driver.c | 4 +-
drivers/media/platform/mem2mem_testdev.c | 3 +-
drivers/media/platform/mx2_emmaprp.c | 1 +
drivers/media/platform/omap/omap_vout.c | 3 +-
drivers/media/platform/omap24xxcam.c | 9 +-
drivers/media/platform/omap24xxcam.h | 3 +
drivers/media/platform/omap3isp/isp.c | 51 +-
drivers/media/platform/omap3isp/ispccdc.c | 2 +-
drivers/media/platform/omap3isp/ispccp2.c | 21 +-
drivers/media/platform/omap3isp/ispcsi2.c | 2 +-
drivers/media/platform/omap3isp/ispqueue.h | 1 +
drivers/media/platform/omap3isp/ispvideo.c | 6 +-
drivers/media/platform/s3c-camif/camif-capture.c | 2 +-
drivers/media/platform/s3c-camif/camif-core.c | 6 +-
drivers/media/platform/s3c-camif/camif-regs.c | 6 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 2 +-
drivers/media/platform/s5p-tv/hdmi_drv.c | 39 +-
drivers/media/platform/s5p-tv/mixer_drv.c | 22 +-
drivers/media/platform/s5p-tv/mixer_video.c | 3 +-
drivers/media/platform/s5p-tv/sdo_drv.c | 22 +-
drivers/media/platform/s5p-tv/sii9234_drv.c | 4 +-
drivers/media/platform/sh_veu.c | 5 +-
drivers/media/platform/sh_vou.c | 34 +-
drivers/media/platform/soc_camera/Kconfig | 12 +-
drivers/media/platform/soc_camera/Makefile | 6 +-
drivers/media/platform/soc_camera/atmel-isi.c | 38 +-
drivers/media/platform/soc_camera/mx1_camera.c | 48 +-
drivers/media/platform/soc_camera/mx2_camera.c | 41 +-
drivers/media/platform/soc_camera/mx3_camera.c | 44 +-
drivers/media/platform/soc_camera/omap1_camera.c | 41 +-
drivers/media/platform/soc_camera/pxa_camera.c | 46 +-
.../platform/soc_camera/sh_mobile_ceu_camera.c | 642 ++--
drivers/media/platform/soc_camera/sh_mobile_csi2.c | 161 +-
drivers/media/platform/soc_camera/soc_camera.c | 737 ++++-
.../platform/soc_camera/soc_camera_platform.c | 14 +-
drivers/media/platform/soc_camera/soc_scale_crop.c | 402 +++
drivers/media/platform/soc_camera/soc_scale_crop.h | 47 +
drivers/media/platform/timblogiw.c | 11 +-
drivers/media/platform/via-camera.c | 24 +-
drivers/media/radio/radio-keene.c | 7 +-
drivers/media/radio/radio-sf16fmi.c | 127 +-
drivers/media/radio/radio-si476x.c | 11 -
drivers/media/radio/radio-tea5764.c | 190 +-
drivers/media/radio/radio-timb.c | 81 +-
drivers/media/radio/saa7706h.c | 66 +-
drivers/media/radio/tef6862.c | 24 +-
drivers/media/radio/wl128x/fmdrv.h | 2 +
drivers/media/radio/wl128x/fmdrv_common.c | 24 +-
drivers/media/radio/wl128x/fmdrv_v4l2.c | 8 +
drivers/media/rc/gpio-ir-recv.c | 2 -
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-delock-61959.c | 83 +
drivers/media/tuners/r820t.c | 18 +-
drivers/media/usb/Kconfig | 5 +-
drivers/media/usb/Makefile | 1 +
drivers/media/usb/au0828/au0828-video.c | 40 +-
drivers/media/usb/cx231xx/cx231xx-417.c | 1 -
drivers/media/usb/cx231xx/cx231xx-avcore.c | 1 -
drivers/media/usb/cx231xx/cx231xx-cards.c | 1 -
drivers/media/usb/cx231xx/cx231xx-vbi.c | 1 -
drivers/media/usb/cx231xx/cx231xx-video.c | 424 +--
drivers/media/usb/cx231xx/cx231xx.h | 2 +-
drivers/media/usb/dvb-usb-v2/af9035.c | 66 +-
drivers/media/usb/dvb-usb-v2/af9035.h | 11 +-
drivers/media/usb/dvb-usb-v2/dvb_usb.h | 2 +-
drivers/media/usb/dvb-usb-v2/it913x.c | 5 +-
drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c | 8 +-
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 90 +-
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 180 +-
drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 6 +
drivers/media/usb/dvb-usb/az6027.c | 2 +-
drivers/media/usb/dvb-usb/pctv452e.c | 2 +-
drivers/media/usb/em28xx/em28xx-cards.c | 239 +-
drivers/media/usb/em28xx/em28xx-core.c | 27 +-
drivers/media/usb/em28xx/em28xx-dvb.c | 73 +-
drivers/media/usb/em28xx/em28xx-input.c | 1 -
drivers/media/usb/em28xx/em28xx-reg.h | 23 +-
drivers/media/usb/em28xx/em28xx-video.c | 66 +-
drivers/media/usb/em28xx/em28xx.h | 7 +-
drivers/media/usb/gspca/gspca.c | 32 +-
drivers/media/usb/gspca/gspca.h | 6 +-
drivers/media/usb/gspca/pac7302.c | 19 +-
drivers/media/usb/gspca/sn9c20x.c | 69 +-
drivers/media/usb/hdpvr/Kconfig | 2 +-
drivers/media/usb/hdpvr/hdpvr-control.c | 34 +-
drivers/media/usb/hdpvr/hdpvr-core.c | 8 -
drivers/media/usb/hdpvr/hdpvr-video.c | 110 +-
drivers/media/usb/hdpvr/hdpvr.h | 3 +-
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 42 +-
drivers/media/usb/pvrusb2/pvrusb2-hdw.h | 13 +-
drivers/media/usb/pvrusb2/pvrusb2-io.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 43 +-
drivers/media/usb/sn9c102/sn9c102.h | 3 +
drivers/media/usb/sn9c102/sn9c102_core.c | 13 +-
drivers/media/usb/stk1160/stk1160-v4l.c | 41 -
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/tm6000/tm6000-video.c | 13 +-
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 2 +
drivers/media/usb/usbtv/Kconfig | 10 +
drivers/media/usb/usbtv/Makefile | 1 +
drivers/media/usb/usbtv/usbtv.c | 696 +++++
drivers/media/usb/usbvision/usbvision-video.c | 19 +-
drivers/media/usb/uvc/Kconfig | 1 +
drivers/media/usb/uvc/uvc_driver.c | 41 +-
drivers/media/usb/uvc/uvc_status.c | 21 +-
drivers/media/usb/uvc/uvc_v4l2.c | 14 +-
drivers/media/usb/uvc/uvcvideo.h | 7 +-
drivers/media/v4l2-core/Makefile | 3 +-
drivers/media/v4l2-core/v4l2-async.c | 284 ++
drivers/media/v4l2-core/v4l2-clk.c | 242 ++
drivers/media/v4l2-core/v4l2-common.c | 60 +-
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 1 -
drivers/media/v4l2-core/v4l2-dev.c | 40 +-
drivers/media/v4l2-core/v4l2-device.c | 13 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 83 +-
drivers/media/v4l2-core/videobuf-dma-contig.c | 19 +-
drivers/media/v4l2-core/videobuf-dma-sg.c | 10 +-
drivers/media/v4l2-core/videobuf-vmalloc.c | 10 +-
drivers/media/v4l2-core/videobuf2-core.c | 4 +-
drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 4 +-
drivers/staging/media/davinci_vpfe/dm365_ipipeif.c | 4 +-
drivers/staging/media/davinci_vpfe/dm365_isif.c | 4 +-
drivers/staging/media/davinci_vpfe/dm365_resizer.c | 14 +-
drivers/staging/media/davinci_vpfe/vpfe_video.c | 14 +-
drivers/staging/media/dt3155v4l/dt3155v4l.c | 1 -
drivers/staging/media/go7007/go7007-usb.c | 4 +-
drivers/staging/media/lirc/lirc_imon.c | 7 +-
drivers/staging/media/solo6x10/solo6x10-tw28.c | 112 +-
drivers/staging/media/solo6x10/solo6x10-v4l2-enc.c | 38 +-
drivers/usb/gadget/f_uvc.c | 9 +-
drivers/usb/gadget/uvc.h | 2 +
include/media/davinci/vpbe_osd.h | 4 +-
include/media/media-device.h | 9 +-
include/media/media-entity.h | 5 +-
include/media/rc-map.h | 1 +
include/media/s5p_fimc.h | 58 +-
include/media/sh_mobile_ceu.h | 2 +
include/media/sh_mobile_csi2.h | 2 +-
include/media/soc_camera.h | 43 +-
include/media/ths7303.h | 2 -
include/media/tveeprom.h | 11 +
include/media/tvp7002.h | 46 +-
include/media/v4l2-async.h | 105 +
include/media/v4l2-chip-ident.h | 352 ---
include/media/v4l2-clk.h | 54 +
include/media/v4l2-common.h | 10 -
include/media/v4l2-dev.h | 5 +-
include/media/v4l2-int-device.h | 3 -
include/media/v4l2-ioctl.h | 2 -
include/media/v4l2-subdev.h | 14 +-
include/uapi/linux/v4l2-controls.h | 4 +-
include/uapi/linux/videodev2.h | 27 +-
358 files changed, 10866 insertions(+), 9826 deletions(-)
delete mode 100644 Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml
create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt
create mode 100644 Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
create mode 100644 drivers/media/i2c/ml86v7667.c
create mode 100644 drivers/media/i2c/ths8200.c
create mode 100644 drivers/media/i2c/ths8200_regs.h
create mode 100644 drivers/media/platform/exynos4-is/common.c
create mode 100644 drivers/media/platform/exynos4-is/common.h
create mode 100644 drivers/media/platform/soc_camera/soc_scale_crop.c
create mode 100644 drivers/media/platform/soc_camera/soc_scale_crop.h
create mode 100644 drivers/media/rc/keymaps/rc-delock-61959.c
create mode 100644 drivers/media/usb/usbtv/Kconfig
create mode 100644 drivers/media/usb/usbtv/Makefile
create mode 100644 drivers/media/usb/usbtv/usbtv.c
create mode 100644 drivers/media/v4l2-core/v4l2-async.c
create mode 100644 drivers/media/v4l2-core/v4l2-clk.c
create mode 100644 include/media/v4l2-async.h
delete mode 100644 include/media/v4l2-chip-ident.h
create mode 100644 include/media/v4l2-clk.h
Mauro,
On Mon, Jul 1, 2013 at 4:28 PM, Mauro Carvalho Chehab
<[email protected]> wrote:
> Hi Linus,
>
> Please pull from:
> git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
>
> For the media patches for Kernel v3.11.
>
>
> Zoran Turalija (2):
> [media] stb0899: allow minimum symbol rate of 1000000
> [media] stb0899: allow minimum symbol rate of 2000000
Somehow, I missed these patches; These are incorrect. Please revert
these changes.
Simply changing the advertized minima values don't change the search algorithm
behaviour, it simply leads to broken behaviour.
NACK for these changes.
Regards,
Manu
Em Mon, 1 Jul 2013 16:37:58 +0530
Manu Abraham <[email protected]> escreveu:
> Mauro,
>
> On Mon, Jul 1, 2013 at 4:28 PM, Mauro Carvalho Chehab
> <[email protected]> wrote:
> > Hi Linus,
> >
> > Please pull from:
> > git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
> >
> > For the media patches for Kernel v3.11.
> >
>
> >
> > Zoran Turalija (2):
> > [media] stb0899: allow minimum symbol rate of 1000000
> > [media] stb0899: allow minimum symbol rate of 2000000
>
>
> Somehow, I missed these patches; These are incorrect. Please revert
> these changes.
> Simply changing the advertized minima values don't change the search algorithm
> behaviour, it simply leads to broken behaviour.
>
> NACK for these changes.
While this patch came from a sub-maintainer's tree, looking at its
history, the patch was proposed here:
https://linuxtv.org/patch/18341/
>From what it is said there, with this patch, 6 additional channels
were discovered when using with Eutelsat 16A, that uses a symbol
rate between 2MS/s to 5 MS/s. Without this patch, those channels won't
be discovered, as the core won't try to use a symbol rate outside
the range.
Of course, transponders with a symbol rate equal or upper than 5MS/s
won't be affected by this patch.
Even if this is not a perfect patch and some changes would be
needed to improve tuning for those low symbol rate transponders,
it seems better than before, as at least now some channels are tuned.
The only reason I can see to reverse this patch is that if setting
the frontend to low bit ranges could damage the frontend or could
hit some bug on the hardware (or internal firmware).
Yet, from the datasheet pointed by the patch author, it seems that
this frontend allows such low symbol rates:
http://comtech.sg1002.myweb.hinet.net/pdf/dvbs2-6899.pdf
Let me copy some people at ST. Maybe they could help to check internally
there if there are any risks for the hardware to accept low symbol rate
transponders.
Regards,
Mauro
On Mon, Jul 1, 2013 at 9:05 PM, Mauro Carvalho Chehab
<[email protected]> wrote:
> Em Mon, 1 Jul 2013 16:37:58 +0530
> Manu Abraham <[email protected]> escreveu:
>
>> Mauro,
>>
>> On Mon, Jul 1, 2013 at 4:28 PM, Mauro Carvalho Chehab
>> <[email protected]> wrote:
>> > Hi Linus,
>> >
>> > Please pull from:
>> > git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
>> >
>> > For the media patches for Kernel v3.11.
>> >
>>
>> >
>> > Zoran Turalija (2):
>> > [media] stb0899: allow minimum symbol rate of 1000000
>> > [media] stb0899: allow minimum symbol rate of 2000000
>>
>>
>> Somehow, I missed these patches; These are incorrect. Please revert
>> these changes.
>> Simply changing the advertized minima values don't change the search algorithm
>> behaviour, it simply leads to broken behaviour.
>>
>> NACK for these changes.
>
> While this patch came from a sub-maintainer's tree, looking at its
> history, the patch was proposed here:
> https://linuxtv.org/patch/18341/
>
Wherever it came from, the patch is incorrect. Anyone can throw in
any patch as they want.
> From what it is said there, with this patch, 6 additional channels
> were discovered when using with Eutelsat 16A, that uses a symbol
> rate between 2MS/s to 5 MS/s. Without this patch, those channels won't
> be discovered, as the core won't try to use a symbol rate outside
> the range.
What you are stating is a hit and miss scenario, sometimes it might lock
and sometimes it wouldn't.
The scanning algorithm that I implemented for the demodulator works
with a symbol rate as low as 5 MSPS alone. Anything lower than that
is hit and miss.
> Of course, transponders with a symbol rate equal or upper than 5MS/s
> won't be affected by this patch.
>
How can you be sure ? I myself am not very sure. While we worked on
the demodulator in the early days, we had different situations where a
previous failed state could cause lockup of the demodulator, eventually
resulting tuning failures.
> Even if this is not a perfect patch and some changes would be
> needed to improve tuning for those low symbol rate transponders,
> it seems better than before, as at least now some channels are tuned.
>
> The only reason I can see to reverse this patch is that if setting
> the frontend to low bit ranges could damage the frontend or could
> hit some bug on the hardware (or internal firmware).
>
> Yet, from the datasheet pointed by the patch author, it seems that
> this frontend allows such low symbol rates:
> http://comtech.sg1002.myweb.hinet.net/pdf/dvbs2-6899.pdf
The frontend allows a different lower symbol rate with a different
scanning algorithm, not with this existing current one.
I am pretty sure, that author saw some specifications written some
place and simply copied those numbers in here. Also sure that he
has no idea about the algorithm in use.
According to ST itself, a 2MSPS algorithm was created for a very
specific customer requirement, which is not applicable to the existing
algorithm in use with the Linux STB0899 demodulator driver.
Regards,
Manu
Em Mon, 1 Jul 2013 21:17:58 +0530
Manu Abraham <[email protected]> escreveu:
> On Mon, Jul 1, 2013 at 9:05 PM, Mauro Carvalho Chehab
> <[email protected]> wrote:
> > Em Mon, 1 Jul 2013 16:37:58 +0530
> > Manu Abraham <[email protected]> escreveu:
> >
> >> Mauro,
> >>
> >> On Mon, Jul 1, 2013 at 4:28 PM, Mauro Carvalho Chehab
> >> <[email protected]> wrote:
> >> > Hi Linus,
> >> >
> >> > Please pull from:
> >> > git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
> >> >
> >> > For the media patches for Kernel v3.11.
> >> >
> >>
> >> >
> >> > Zoran Turalija (2):
> >> > [media] stb0899: allow minimum symbol rate of 1000000
> >> > [media] stb0899: allow minimum symbol rate of 2000000
> >>
> >>
> >> Somehow, I missed these patches; These are incorrect. Please revert
> >> these changes.
> >> Simply changing the advertized minima values don't change the search algorithm
> >> behaviour, it simply leads to broken behaviour.
> >>
> >> NACK for these changes.
> >
> > While this patch came from a sub-maintainer's tree, looking at its
> > history, the patch was proposed here:
> > https://linuxtv.org/patch/18341/
> >
>
>
> Wherever it came from, the patch is incorrect. Anyone can throw in
> any patch as they want.
>
>
> > From what it is said there, with this patch, 6 additional channels
> > were discovered when using with Eutelsat 16A, that uses a symbol
> > rate between 2MS/s to 5 MS/s. Without this patch, those channels won't
> > be discovered, as the core won't try to use a symbol rate outside
> > the range.
>
> What you are stating is a hit and miss scenario, sometimes it might lock
> and sometimes it wouldn't.
Well, before this change, it was a full miss scenario, as it will
never lock on low symbol rate channels.
> The scanning algorithm that I implemented for the demodulator works
> with a symbol rate as low as 5 MSPS alone. Anything lower than that
> is hit and miss.
Ok, so latter patches need to improve the algorithm to improve it
for lower symbol rates. By getting feedback about this patch, we'll
know more about how bad is the current algorithm, as people may now
report and work on improve it.
> > Of course, transponders with a symbol rate equal or upper than 5MS/s
> > won't be affected by this patch.
> >
>
>
> How can you be sure ? I myself am not very sure. While we worked on
> the demodulator in the early days, we had different situations where a
> previous failed state could cause lockup of the demodulator, eventually
> resulting tuning failures.
If that happens, that would be a firmware or hardware issue.
As I said before, ST can provide us an answer if the hardware has
such bug.
> > Even if this is not a perfect patch and some changes would be
> > needed to improve tuning for those low symbol rate transponders,
> > it seems better than before, as at least now some channels are tuned.
> >
> > The only reason I can see to reverse this patch is that if setting
> > the frontend to low bit ranges could damage the frontend or could
> > hit some bug on the hardware (or internal firmware).
> >
> > Yet, from the datasheet pointed by the patch author, it seems that
> > this frontend allows such low symbol rates:
> > http://comtech.sg1002.myweb.hinet.net/pdf/dvbs2-6899.pdf
>
>
> The frontend allows a different lower symbol rate with a different
> scanning algorithm, not with this existing current one.
>
> I am pretty sure, that author saw some specifications written some
> place and simply copied those numbers in here. Also sure that he
> has no idea about the algorithm in use.
>
> According to ST itself, a 2MSPS algorithm was created for a very
> specific customer requirement, which is not applicable to the existing
> algorithm in use with the Linux STB0899 demodulator driver.
Ok, so let's wait for ST to provide us some feedback on this public
thread, in order to be sure that we need to reverse it because of
some hardware bug, or to get an improved algorithm that will better
work with low symbol rates.
Regards,
Mauro
On Mon, Jul 1, 2013 at 11:12 PM, Mauro Carvalho Chehab
<[email protected]> wrote:
> Em Mon, 1 Jul 2013 21:17:58 +0530
> Manu Abraham <[email protected]> escreveu:
>
>> On Mon, Jul 1, 2013 at 9:05 PM, Mauro Carvalho Chehab
>> <[email protected]> wrote:
>> > Em Mon, 1 Jul 2013 16:37:58 +0530
>> > Manu Abraham <[email protected]> escreveu:
>> >
>> >> Mauro,
>> >>
>> >> On Mon, Jul 1, 2013 at 4:28 PM, Mauro Carvalho Chehab
>> >> <[email protected]> wrote:
>> >> > Hi Linus,
>> >> >
>> >> > Please pull from:
>> >> > git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
>> >> >
>> >> > For the media patches for Kernel v3.11.
>> >> >
>> >>
>> >> >
>> >> > Zoran Turalija (2):
>> >> > [media] stb0899: allow minimum symbol rate of 1000000
>> >> > [media] stb0899: allow minimum symbol rate of 2000000
>> >>
>> >>
>> >> Somehow, I missed these patches; These are incorrect. Please revert
>> >> these changes.
>> >> Simply changing the advertized minima values don't change the search algorithm
>> >> behaviour, it simply leads to broken behaviour.
>> >>
>> >> NACK for these changes.
>> >
>> > While this patch came from a sub-maintainer's tree, looking at its
>> > history, the patch was proposed here:
>> > https://linuxtv.org/patch/18341/
>> >
>>
>>
>> Wherever it came from, the patch is incorrect. Anyone can throw in
>> any patch as they want.
>>
>>
>> > From what it is said there, with this patch, 6 additional channels
>> > were discovered when using with Eutelsat 16A, that uses a symbol
>> > rate between 2MS/s to 5 MS/s. Without this patch, those channels won't
>> > be discovered, as the core won't try to use a symbol rate outside
>> > the range.
>>
>> What you are stating is a hit and miss scenario, sometimes it might lock
>> and sometimes it wouldn't.
>
> Well, before this change, it was a full miss scenario, as it will
> never lock on low symbol rate channels.
>
>> The scanning algorithm that I implemented for the demodulator works
>> with a symbol rate as low as 5 MSPS alone. Anything lower than that
>> is hit and miss.
>
> Ok, so latter patches need to improve the algorithm to improve it
> for lower symbol rates. By getting feedback about this patch, we'll
> know more about how bad is the current algorithm, as people may now
> report and work on improve it.
>
>> > Of course, transponders with a symbol rate equal or upper than 5MS/s
>> > won't be affected by this patch.
>> >
>>
>>
>> How can you be sure ? I myself am not very sure. While we worked on
>> the demodulator in the early days, we had different situations where a
>> previous failed state could cause lockup of the demodulator, eventually
>> resulting tuning failures.
>
> If that happens, that would be a firmware or hardware issue.
> As I said before, ST can provide us an answer if the hardware has
> such bug.
>
>> > Even if this is not a perfect patch and some changes would be
>> > needed to improve tuning for those low symbol rate transponders,
>> > it seems better than before, as at least now some channels are tuned.
>> >
>> > The only reason I can see to reverse this patch is that if setting
>> > the frontend to low bit ranges could damage the frontend or could
>> > hit some bug on the hardware (or internal firmware).
>> >
>> > Yet, from the datasheet pointed by the patch author, it seems that
>> > this frontend allows such low symbol rates:
>> > http://comtech.sg1002.myweb.hinet.net/pdf/dvbs2-6899.pdf
>>
>>
>> The frontend allows a different lower symbol rate with a different
>> scanning algorithm, not with this existing current one.
>>
>> I am pretty sure, that author saw some specifications written some
>> place and simply copied those numbers in here. Also sure that he
>> has no idea about the algorithm in use.
>>
>> According to ST itself, a 2MSPS algorithm was created for a very
>> specific customer requirement, which is not applicable to the existing
>> algorithm in use with the Linux STB0899 demodulator driver.
>
> Ok, so let's wait for ST to provide us some feedback on this public
> thread, in order to be sure that we need to reverse it because of
> some hardware bug, or to get an improved algorithm that will better
> work with low symbol rates.
I don't think anyone is going to spend enough time to answer your
stupid comments.
As being the author of this driver, and the person who added support
for cards based on the chipset: NACK
Linus,
I NACK the patches for the said reasons.
Regards,
Manu
Regards,
Manu
Hi Mauro,
On Mon, 1 Jul 2013 07:58:56 -0300 Mauro Carvalho Chehab <[email protected]> wrote:
>
> Please pull from:
> git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
>
> For the media patches for Kernel v3.11.
I am not sure why you added a back merge of v3.10 before sending this to
Linus?
--
Cheers,
Stephen Rothwell [email protected]