Commit: c05eecf63610 ("SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones")
removed the 'fair scheduling' feature from SUNRPC priority queues.
This feature caused problems for some queues (send queue and session slot queue)
but is still needed for others, particularly the tcp slot queue.
Without fairness, reads (priority 1) can starve background writes
(priority 0) so a streaming read can cause writeback to block
indefinitely. This is not easy to measure with default settings as
the current slot table size is much larger than the read-ahead size.
However if the slot-table size is reduced (seen when backporting to
older kernels with a limited size) the problem is easily demonstrated.
This patch conditionally restores fair scheduling. It is now the
default unless rpc_sleep_on_priority() is called directly. Then the
queue switches to strict priority observance.
As that function is called for both the send queue and the session
slot queue and not for any others, this has exactly the desired
effect.
The "count" field that was removed by the previous patch is restored.
A value for '255' means "strict priority queuing, no fair queuing".
Any other value is a could of owners to be processed before switching
to a different priority level, just like before.
Signed-off-by: NeilBrown <[email protected]>
---
It is quite possible that you won't like the overloading of
rpc_sleep_on_priority() to disable fair-scheduling and would prefer an
extra arg to rpc_init_priority_wait_queue(). I can do it that way if
you like.
NeilBrown
include/linux/sunrpc/sched.h | 1 +
net/sunrpc/sched.c | 12 +++++++++---
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index d703f0ef37d8..985efe8d7e26 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -184,6 +184,7 @@ struct rpc_wait_queue {
pid_t owner; /* process id of last task serviced */
unsigned char maxpriority; /* maximum priority (0 if queue is not a priority queue) */
unsigned char priority; /* current priority */
+ unsigned char count; /* # task groups remaining to be serviced */
unsigned char nr; /* # tasks remaining for cookie */
unsigned short qlen; /* total # tasks waiting in queue */
struct rpc_timer timer_list;
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 73ad57a59989..e8fcd4f098bb 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -117,6 +117,8 @@ static void rpc_set_waitqueue_priority(struct rpc_wait_queue *queue, int priorit
rpc_rotate_queue_owner(queue);
queue->priority = priority;
}
+ if (queue->count != 255)
+ queue->count = 1 << (priority * 2);
}
static void rpc_set_waitqueue_owner(struct rpc_wait_queue *queue, pid_t pid)
@@ -144,8 +146,10 @@ static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
INIT_LIST_HEAD(&task->u.tk_wait.links);
if (unlikely(queue_priority > queue->maxpriority))
queue_priority = queue->maxpriority;
- if (queue_priority > queue->priority)
- rpc_set_waitqueue_priority(queue, queue_priority);
+ if (queue->count == 255) {
+ if (queue_priority > queue->priority)
+ rpc_set_waitqueue_priority(queue, queue_priority);
+ }
q = &queue->tasks[queue_priority];
list_for_each_entry(t, q, u.tk_wait.list) {
if (t->tk_owner == task->tk_owner) {
@@ -401,6 +405,7 @@ void rpc_sleep_on_priority(struct rpc_wait_queue *q, struct rpc_task *task,
* Protect the queue operations.
*/
spin_lock_bh(&q->lock);
+ q->count = 255;
__rpc_sleep_on_priority(q, task, action, priority - RPC_PRIORITY_LOW);
spin_unlock_bh(&q->lock);
}
@@ -478,7 +483,8 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
/*
* Check if we need to switch queues.
*/
- goto new_owner;
+ if (queue->count == 255 || --queue->count)
+ goto new_owner;
}
/*
--
2.6.3
On Tue, Dec 15, 2015 at 6:44 PM, NeilBrown <[email protected]> wrote:
>
> Commit: c05eecf63610 ("SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones")
>
> removed the 'fair scheduling' feature from SUNRPC priority queues.
> This feature caused problems for some queues (send queue and session slot queue)
> but is still needed for others, particularly the tcp slot queue.
>
> Without fairness, reads (priority 1) can starve background writes
> (priority 0) so a streaming read can cause writeback to block
> indefinitely. This is not easy to measure with default settings as
> the current slot table size is much larger than the read-ahead size.
> However if the slot-table size is reduced (seen when backporting to
> older kernels with a limited size) the problem is easily demonstrated.
>
> This patch conditionally restores fair scheduling. It is now the
> default unless rpc_sleep_on_priority() is called directly. Then the
> queue switches to strict priority observance.
>
> As that function is called for both the send queue and the session
> slot queue and not for any others, this has exactly the desired
> effect.
>
> The "count" field that was removed by the previous patch is restored.
> A value for '255' means "strict priority queuing, no fair queuing".
> Any other value is a could of owners to be processed before switching
> to a different priority level, just like before.
>
> Signed-off-by: NeilBrown <[email protected]>
> ---
>
> It is quite possible that you won't like the overloading of
> rpc_sleep_on_priority() to disable fair-scheduling and would prefer an
> extra arg to rpc_init_priority_wait_queue(). I can do it that way if
> you like.
> NeilBrown
>
>
> include/linux/sunrpc/sched.h | 1 +
> net/sunrpc/sched.c | 12 +++++++++---
> 2 files changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
> index d703f0ef37d8..985efe8d7e26 100644
> --- a/include/linux/sunrpc/sched.h
> +++ b/include/linux/sunrpc/sched.h
> @@ -184,6 +184,7 @@ struct rpc_wait_queue {
> pid_t owner; /* process id of last task serviced */
> unsigned char maxpriority; /* maximum priority (0 if queue is not a priority queue) */
> unsigned char priority; /* current priority */
> + unsigned char count; /* # task groups remaining to be serviced */
> unsigned char nr; /* # tasks remaining for cookie */
> unsigned short qlen; /* total # tasks waiting in queue */
> struct rpc_timer timer_list;
> diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
> index 73ad57a59989..e8fcd4f098bb 100644
> --- a/net/sunrpc/sched.c
> +++ b/net/sunrpc/sched.c
> @@ -117,6 +117,8 @@ static void rpc_set_waitqueue_priority(struct rpc_wait_queue *queue, int priorit
> rpc_rotate_queue_owner(queue);
> queue->priority = priority;
> }
> + if (queue->count != 255)
> + queue->count = 1 << (priority * 2);
> }
>
> static void rpc_set_waitqueue_owner(struct rpc_wait_queue *queue, pid_t pid)
> @@ -144,8 +146,10 @@ static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
> INIT_LIST_HEAD(&task->u.tk_wait.links);
> if (unlikely(queue_priority > queue->maxpriority))
> queue_priority = queue->maxpriority;
> - if (queue_priority > queue->priority)
> - rpc_set_waitqueue_priority(queue, queue_priority);
> + if (queue->count == 255) {
> + if (queue_priority > queue->priority)
> + rpc_set_waitqueue_priority(queue, queue_priority);
> + }
> q = &queue->tasks[queue_priority];
> list_for_each_entry(t, q, u.tk_wait.list) {
> if (t->tk_owner == task->tk_owner) {
> @@ -401,6 +405,7 @@ void rpc_sleep_on_priority(struct rpc_wait_queue *q, struct rpc_task *task,
> * Protect the queue operations.
> */
> spin_lock_bh(&q->lock);
> + q->count = 255;
> __rpc_sleep_on_priority(q, task, action, priority - RPC_PRIORITY_LOW);
> spin_unlock_bh(&q->lock);
> }
> @@ -478,7 +483,8 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
> /*
> * Check if we need to switch queues.
> */
> - goto new_owner;
> + if (queue->count == 255 || --queue->count)
> + goto new_owner;
> }
>
> /*
>
Are we sure there is value in keeping FLUSH_LOWPRI for background writes?
Cheers
Trond
On Wed, Dec 16 2015, Trond Myklebust wrote:
> On Tue, Dec 15, 2015 at 6:44 PM, NeilBrown <[email protected]> wrote:
>>
>> Commit: c05eecf63610 ("SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones")
>>
>> removed the 'fair scheduling' feature from SUNRPC priority queues.
>> This feature caused problems for some queues (send queue and session slot queue)
>> but is still needed for others, particularly the tcp slot queue.
>>
>> Without fairness, reads (priority 1) can starve background writes
>> (priority 0) so a streaming read can cause writeback to block
>> indefinitely. This is not easy to measure with default settings as
>> the current slot table size is much larger than the read-ahead size.
>> However if the slot-table size is reduced (seen when backporting to
>> older kernels with a limited size) the problem is easily demonstrated.
>>
>> This patch conditionally restores fair scheduling. It is now the
>> default unless rpc_sleep_on_priority() is called directly. Then the
>> queue switches to strict priority observance.
>>
>> As that function is called for both the send queue and the session
>> slot queue and not for any others, this has exactly the desired
>> effect.
>>
>> The "count" field that was removed by the previous patch is restored.
>> A value for '255' means "strict priority queuing, no fair queuing".
>> Any other value is a could of owners to be processed before switching
>> to a different priority level, just like before.
>>
>> Signed-off-by: NeilBrown <[email protected]>
>> ---
>>
>> It is quite possible that you won't like the overloading of
>> rpc_sleep_on_priority() to disable fair-scheduling and would prefer an
>> extra arg to rpc_init_priority_wait_queue(). I can do it that way if
>> you like.
>> NeilBrown
>>
>>
>> include/linux/sunrpc/sched.h | 1 +
>> net/sunrpc/sched.c | 12 +++++++++---
>> 2 files changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
>> index d703f0ef37d8..985efe8d7e26 100644
>> --- a/include/linux/sunrpc/sched.h
>> +++ b/include/linux/sunrpc/sched.h
>> @@ -184,6 +184,7 @@ struct rpc_wait_queue {
>> pid_t owner; /* process id of last task serviced */
>> unsigned char maxpriority; /* maximum priority (0 if queue is not a priority queue) */
>> unsigned char priority; /* current priority */
>> + unsigned char count; /* # task groups remaining to be serviced */
>> unsigned char nr; /* # tasks remaining for cookie */
>> unsigned short qlen; /* total # tasks waiting in queue */
>> struct rpc_timer timer_list;
>> diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
>> index 73ad57a59989..e8fcd4f098bb 100644
>> --- a/net/sunrpc/sched.c
>> +++ b/net/sunrpc/sched.c
>> @@ -117,6 +117,8 @@ static void rpc_set_waitqueue_priority(struct rpc_wait_queue *queue, int priorit
>> rpc_rotate_queue_owner(queue);
>> queue->priority = priority;
>> }
>> + if (queue->count != 255)
>> + queue->count = 1 << (priority * 2);
>> }
>>
>> static void rpc_set_waitqueue_owner(struct rpc_wait_queue *queue, pid_t pid)
>> @@ -144,8 +146,10 @@ static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
>> INIT_LIST_HEAD(&task->u.tk_wait.links);
>> if (unlikely(queue_priority > queue->maxpriority))
>> queue_priority = queue->maxpriority;
>> - if (queue_priority > queue->priority)
>> - rpc_set_waitqueue_priority(queue, queue_priority);
>> + if (queue->count == 255) {
>> + if (queue_priority > queue->priority)
>> + rpc_set_waitqueue_priority(queue, queue_priority);
>> + }
>> q = &queue->tasks[queue_priority];
>> list_for_each_entry(t, q, u.tk_wait.list) {
>> if (t->tk_owner == task->tk_owner) {
>> @@ -401,6 +405,7 @@ void rpc_sleep_on_priority(struct rpc_wait_queue *q, struct rpc_task *task,
>> * Protect the queue operations.
>> */
>> spin_lock_bh(&q->lock);
>> + q->count = 255;
>> __rpc_sleep_on_priority(q, task, action, priority - RPC_PRIORITY_LOW);
>> spin_unlock_bh(&q->lock);
>> }
>> @@ -478,7 +483,8 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
>> /*
>> * Check if we need to switch queues.
>> */
>> - goto new_owner;
>> + if (queue->count == 255 || --queue->count)
>> + goto new_owner;
>> }
>>
>> /*
>>
>
> Are we sure there is value in keeping FLUSH_LOWPRI for background writes?
There is currently also FLUSH_HIGHPRI for "for_reclaim" writes.
Should they be allowed to starve reads?
If you treated all reads and writed the same, then I can't see value in
restoring fair scheduling. If there is any difference, then I suspect
we do need the fairness.
Thanks,
NeilBrown
On Tue, Dec 15, 2015 at 10:10 PM, NeilBrown <[email protected]> wrote:
> On Wed, Dec 16 2015, Trond Myklebust wrote:
>
>> On Tue, Dec 15, 2015 at 6:44 PM, NeilBrown <[email protected]> wrote:
>>>
>>> Commit: c05eecf63610 ("SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones")
>>>
>>> removed the 'fair scheduling' feature from SUNRPC priority queues.
>>> This feature caused problems for some queues (send queue and session slot queue)
>>> but is still needed for others, particularly the tcp slot queue.
>>>
>>> Without fairness, reads (priority 1) can starve background writes
>>> (priority 0) so a streaming read can cause writeback to block
>>> indefinitely. This is not easy to measure with default settings as
>>> the current slot table size is much larger than the read-ahead size.
>>> However if the slot-table size is reduced (seen when backporting to
>>> older kernels with a limited size) the problem is easily demonstrated.
>>>
>>> This patch conditionally restores fair scheduling. It is now the
>>> default unless rpc_sleep_on_priority() is called directly. Then the
>>> queue switches to strict priority observance.
>>>
>>> As that function is called for both the send queue and the session
>>> slot queue and not for any others, this has exactly the desired
>>> effect.
>>>
>>> The "count" field that was removed by the previous patch is restored.
>>> A value for '255' means "strict priority queuing, no fair queuing".
>>> Any other value is a could of owners to be processed before switching
>>> to a different priority level, just like before.
<snip>
>> Are we sure there is value in keeping FLUSH_LOWPRI for background writes?
>
> There is currently also FLUSH_HIGHPRI for "for_reclaim" writes.
> Should they be allowed to starve reads?
>
> If you treated all reads and writed the same, then I can't see value in
> restoring fair scheduling. If there is any difference, then I suspect
> we do need the fairness.
I disagree. Reclaiming memory should always be able to pre-empt
"interactive" features such as read. Everything goes down the toilet
when we force the kernel into situations where it needs to swap.
Cheers
Trond