Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v3:
remove NULL return check as it is invalid
remove unused phylink_device_phy_connect()
Changes in v2:
replace of_ and acpi_ code with generic fwnode to get phy-handle.
drivers/net/phy/phylink.c | 48 +++++++++++++++++++++++++++++++++++++++
include/linux/phylink.h | 3 +++
2 files changed, 51 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 0f23bec431c1..560d1069426c 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -961,6 +961,54 @@ int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
}
EXPORT_SYMBOL_GPL(phylink_connect_phy);
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl. Actions specified in phylink_connect_phy() will be
+ * performed.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+ struct fwnode_handle *fwnode,
+ u32 flags)
+{
+ struct fwnode_handle *phy_fwnode;
+ struct phy_device *phy_dev;
+ int ret = 0;
+
+ /* Fixed links and 802.3z are handled without needing a PHY */
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ phy_interface_mode_is_8023z(pl->link_interface)))
+ return 0;
+
+ phy_fwnode = fwnode_get_phy_node(fwnode);
+ if ((IS_ERR(phy_fwnode)) && pl->cfg_link_an_mode == MLO_AN_PHY)
+ return -ENODEV;
+
+ phy_dev = fwnode_phy_find_device(phy_fwnode);
+ fwnode_handle_put(phy_fwnode);
+ if (!phy_dev)
+ return -ENODEV;
+
+ ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+ pl->link_interface);
+ if (ret)
+ return ret;
+
+ ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+ if (ret)
+ phy_detach(phy_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
/**
* phylink_of_phy_connect() - connect the PHY specified in the DT mode.
* @pl: a pointer to a &struct phylink returned from phylink_create()
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index cc5b452a184e..107fb0afc3bb 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -367,6 +367,9 @@ void phylink_add_pcs(struct phylink *, const struct phylink_pcs_ops *ops);
void phylink_destroy(struct phylink *);
int phylink_connect_phy(struct phylink *, struct phy_device *);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+ struct fwnode_handle *fwnode,
+ u32 flags);
int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
void phylink_disconnect_phy(struct phylink *);
--
2.17.1
On Tue, May 5, 2020 at 4:29 PM Calvin Johnson
<[email protected]> wrote:
>
> Define phylink_fwnode_phy_connect() to connect phy specified by
> a fwnode to a phylink instance.
...
> + int ret = 0;
Redundant assignment.
> + if ((IS_ERR(phy_fwnode)) && pl->cfg_link_an_mode == MLO_AN_PHY)
No Lisp, please.
> + return -ENODEV;
...
> + phy_dev = fwnode_phy_find_device(phy_fwnode);
> + fwnode_handle_put(phy_fwnode);
Hmm... Isn't it racy? I mean if you put fwnode here the phy_dev may
already be gone before you call phy_attach_direct, right?
> + if (!phy_dev)
> + return -ENODEV;
> +
> + ret = phy_attach_direct(pl->netdev, phy_dev, flags,
> + pl->link_interface);
> + if (ret)
> + return ret;
> +
> + ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
> + if (ret)
> + phy_detach(phy_dev);
> +
> + return ret;
--
With Best Regards,
Andy Shevchenko
On Tue, May 05, 2020 at 06:59:03PM +0530, Calvin Johnson wrote:
> Define phylink_fwnode_phy_connect() to connect phy specified by
> a fwnode to a phylink instance.
>
> Signed-off-by: Calvin Johnson <[email protected]>
> ---
>
> Changes in v3:
> remove NULL return check as it is invalid
> remove unused phylink_device_phy_connect()
>
> Changes in v2:
> replace of_ and acpi_ code with generic fwnode to get phy-handle.
>
> drivers/net/phy/phylink.c | 48 +++++++++++++++++++++++++++++++++++++++
> include/linux/phylink.h | 3 +++
> 2 files changed, 51 insertions(+)
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 0f23bec431c1..560d1069426c 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -961,6 +961,54 @@ int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
> }
> EXPORT_SYMBOL_GPL(phylink_connect_phy);
>
> +/**
> + * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
> + * @pl: a pointer to a &struct phylink returned from phylink_create()
> + * @fwnode: a pointer to a &struct fwnode_handle.
> + * @flags: PHY-specific flags to communicate to the PHY device driver
> + *
> + * Connect the phy specified @fwnode to the phylink instance specified
> + * by @pl. Actions specified in phylink_connect_phy() will be
> + * performed.
> + *
> + * Returns 0 on success or a negative errno.
> + */
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> + struct fwnode_handle *fwnode,
> + u32 flags)
> +{
> + struct fwnode_handle *phy_fwnode;
> + struct phy_device *phy_dev;
> + int ret = 0;
> +
> + /* Fixed links and 802.3z are handled without needing a PHY */
> + if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> + (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> + phy_interface_mode_is_8023z(pl->link_interface)))
> + return 0;
> +
> + phy_fwnode = fwnode_get_phy_node(fwnode);
> + if ((IS_ERR(phy_fwnode)) && pl->cfg_link_an_mode == MLO_AN_PHY)
> + return -ENODEV;
This doesn't reflect the behaviour of phylink_of_phy_connect() - it is
*not* a cleanup of what is there, which is:
if (!phy_node) {
if (pl->cfg_link_an_mode == MLO_AN_PHY)
return -ENODEV;
return 0;
}
which does:
- if there is a PHY node, find the PHY and connect it.
- if there is no PHY node, then:
+ if we are expecting a PHY to be present, return an error.
+ otherwise, it is not a problem, continue.
That is very important behaviour - it allows drivers to call
phylink_*_phy_connect() without knowing whether there should or should
not be a PHY - and keeps that knowledge within phylink. It means
network drivers don't have to parse the firmware to find out if there's
a fixed link or SFP cage attached, and decide whether to call these
functions.
> +
> + phy_dev = fwnode_phy_find_device(phy_fwnode);
> + fwnode_handle_put(phy_fwnode);
> + if (!phy_dev)
> + return -ENODEV;
> +
> + ret = phy_attach_direct(pl->netdev, phy_dev, flags,
> + pl->link_interface);
> + if (ret)
> + return ret;
> +
> + ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
> + if (ret)
> + phy_detach(phy_dev);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
> +
I think we need to go further with this, and we need to have
phylink_fwnode_phy_connect() functionally identical to
phylink_of_phy_connect() for DT-based fwnodes. Doing so will avoid
introducing errors such as the one you've added above.
The only difference between these two is that DT has a number of
legacy properties - these can be omitted if the fwnode is not a DT
node.
Remember that fwnode is compatible with DT, so fwnode_phy_find_device()
can internally decide whether to look for the ACPI property or one of
the three DT properties.
It also means that phylink_of_phy_connect() can become:
int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
u32 flags)
{
return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
}
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up