On Tue, 07 May 2024 21:52:28 +0800, Cong Yang wrote:
> In V1, discussed with Doug and Linus [1], we need break out as separate
> driver for the himax83102-j02 controller. Beacuse "starry,himax83102-j02"
> and in this series "BOE nv110wum-l60" "IVO t109nw41" panels use same
> controller, they have some common CMDS. So add new documentation for
> this panels.
>
> For himax83102-j02 controller, no need 3v3 supply, so remove it.
>
> [1]: https://lore.kernel.org/all/CACRpkdbzYZAS0=zBQJUC4CB2wj4s1h6n6aSAZQvdMV95r3zRUw@mail.gmail.com
>
> Signed-off-by: Cong Yang <[email protected]>
> ---
> Chage since V4:
>
> - Update commit message and add fallback compatible.
>
> V3: https://lore.kernel.org/all/20240424023010.2099949-2-yangcong5@huaqin.corp-partner.google.com
>
> Chage since V3:
>
> - Update commit message.
>
> V2: https://lore.kernel.org/all/20240422090310.3311429-2-yangcong5@huaqin.corp-partner.google.com
>
> ---
> .../display/panel/boe,tv101wum-nl6.yaml | 2 -
> .../bindings/display/panel/himax,hx83102.yaml | 73 +++++++++++++++++++
> 2 files changed, 73 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/himax,hx83102.example.dtb: panel@0: compatible:0: 'starry,himax83102-j02, himax,hx83102' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
from schema $id: http://devicetree.org/schemas/dt-core.yaml#
Documentation/devicetree/bindings/display/panel/himax,hx83102.example.dtb: /example-0/dsi/panel@0: failed to match any schema with compatible: ['starry,himax83102-j02, himax,hx83102']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240507135234.1356855-2-yangcong5@huaqin.corp-partner.google.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Hi,
On Tue, May 7, 2024 at 8:14 AM Rob Herring (Arm) <[email protected]> wrote:
>
>
> On Tue, 07 May 2024 21:52:28 +0800, Cong Yang wrote:
> > In V1, discussed with Doug and Linus [1], we need break out as separate
> > driver for the himax83102-j02 controller. Beacuse "starry,himax83102-j02"
> > and in this series "BOE nv110wum-l60" "IVO t109nw41" panels use same
> > controller, they have some common CMDS. So add new documentation for
> > this panels.
> >
> > For himax83102-j02 controller, no need 3v3 supply, so remove it.
> >
> > [1]: https://lore.kernel.org/all/CACRpkdbzYZAS0=zBQJUC4CB2wj4s1h6n6aSAZQvdMV95r3zRUw@mail.gmail.com
> >
> > Signed-off-by: Cong Yang <[email protected]>
> > ---
> > Chage since V4:
> >
> > - Update commit message and add fallback compatible.
> >
> > V3: https://lore.kernel.org/all/20240424023010.2099949-2-yangcong5@huaqin.corp-partner.google.com
> >
> > Chage since V3:
> >
> > - Update commit message.
> >
> > V2: https://lore.kernel.org/all/20240422090310.3311429-2-yangcong5@huaqin.corp-partner.google.com
> >
> > ---
> > .../display/panel/boe,tv101wum-nl6.yaml | 2 -
> > .../bindings/display/panel/himax,hx83102.yaml | 73 +++++++++++++++++++
> > 2 files changed, 73 insertions(+), 2 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/himax,hx83102.example.dtb: panel@0: compatible:0: 'starry,himax83102-j02, himax,hx83102' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
> from schema $id: http://devicetree.org/schemas/dt-core.yaml#
> Documentation/devicetree/bindings/display/panel/himax,hx83102.example.dtb: /example-0/dsi/panel@0: failed to match any schema with compatible: ['starry,himax83102-j02, himax,hx83102']
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240507135234.1356855-2-yangcong5@huaqin.corp-partner.google.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
I think several of your bindings patches have triggered Rob's bot.
Please make sure you're set up to test this yourself and make sure you
run it locally before sending out the next version of your patches. In
general you should get in the habit of running 'make dt_binding_check'
locally before you post any bindings changes.
Thanks!
-Doug
Hi, Doug &Conor
Doug Anderson <[email protected]> 于2024年5月8日周三 00:40写道：
>
> Hi,
>
> On Tue, May 7, 2024 at 8:14 AM Rob Herring (Arm) <[email protected]> wrote:
> >
> >
> > On Tue, 07 May 2024 21:52:28 +0800, Cong Yang wrote:
> > > In V1, discussed with Doug and Linus [1], we need break out as separate
> > > driver for the himax83102-j02 controller. Beacuse "starry,himax83102-j02"
> > > and in this series "BOE nv110wum-l60" "IVO t109nw41" panels use same
> > > controller, they have some common CMDS. So add new documentation for
> > > this panels.
> > >
> > > For himax83102-j02 controller, no need 3v3 supply, so remove it.
> > >
> > > [1]: https://lore.kernel.org/all/CACRpkdbzYZAS0=zBQJUC4CB2wj4s1h6n6aSAZQvdMV95r3zRUw@mail.gmail.com
> > >
> > > Signed-off-by: Cong Yang <[email protected]>
> > > ---
> > > Chage since V4:
> > >
> > > - Update commit message and add fallback compatible.
> > >
> > > V3: https://lore.kernel.org/all/20240424023010.2099949-2-yangcong5@huaqin.corp-partner.google.com
> > >
> > > Chage since V3:
> > >
> > > - Update commit message.
> > >
> > > V2: https://lore.kernel.org/all/20240422090310.3311429-2-yangcong5@huaqin.corp-partner.google.com
> > >
> > > ---
> > > .../display/panel/boe,tv101wum-nl6.yaml | 2 -
> > > .../bindings/display/panel/himax,hx83102.yaml | 73 +++++++++++++++++++
> > > 2 files changed, 73 insertions(+), 2 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
> > >
> >
> > My bot found errors running 'make dt_binding_check' on your patch:
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/himax,hx83102.example.dtb: panel@0: compatible:0: 'starry,himax83102-j02, himax,hx83102' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
> > from schema $id: http://devicetree.org/schemas/dt-core.yaml#
> > Documentation/devicetree/bindings/display/panel/himax,hx83102.example.dtb: /example-0/dsi/panel@0: failed to match any schema with compatible: ['starry,himax83102-j02, himax,hx83102']
> >
> > doc reference errors (make refcheckdocs):
> >
> > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240507135234.1356855-2-yangcong5@huaqin.corp-partner.google.com
> >
> > The base for the series is generally the latest rc1. A different dependency
> > should be noted in *this* patch.
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> >
> > pip3 install dtschema --upgrade
> >
> > Please check and re-submit after running the above command yourself. Note
> > that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> > your schema. However, it must be unset to test all examples with your schema.
>
> I think several of your bindings patches have triggered Rob's bot.
> Please make sure you're set up to test this yourself and make sure you
> run it locally before sending out the next version of your patches. In
> general you should get in the habit of running 'make dt_binding_check'
> locally before you post any bindings changes.
Sorry, I forgot to running 'make dt_binding_check'.
Thanks for the correction.
>
> Thanks!
>
> -Doug