From: Shakeel Butt <[email protected]>
Introduce a memcg interface to trigger memory reclaim on a memory cgroup.
Use case: Proactive Reclaim
---------------------------
A userspace proactive reclaimer can continuously probe the memcg to
reclaim a small amount of memory. This gives more accurate and
up-to-date workingset estimation as the LRUs are continuously
sorted and can potentially provide more deterministic memory
overcommit behavior. The memory overcommit controller can provide
more proactive response to the changing behavior of the running
applications instead of being reactive.
A userspace reclaimer's purpose in this case is not a complete replacement
for kswapd or direct reclaim, it is to proactively identify memory savings
opportunities and reclaim some amount of cold pages set by the policy
to free up the memory for more demanding jobs or scheduling new jobs.
A user space proactive reclaimer is used in Google data centers.
Additionally, Meta's TMO paper recently referenced a very similar
interface used for user space proactive reclaim:
https://dl.acm.org/doi/pdf/10.1145/3503222.3507731
Benefits of a user space reclaimer:
-----------------------------------
1) More flexible on who should be charged for the cpu of the memory
reclaim. For proactive reclaim, it makes more sense to be centralized.
2) More flexible on dedicating the resources (like cpu). The memory
overcommit controller can balance the cost between the cpu usage and
the memory reclaimed.
3) Provides a way to the applications to keep their LRUs sorted, so,
under memory pressure better reclaim candidates are selected. This also
gives more accurate and uptodate notion of working set for an
application.
Why memory.high is not enough?
------------------------------
- memory.high can be used to trigger reclaim in a memcg and can
potentially be used for proactive reclaim.
However there is a big downside in using memory.high. It can potentially
introduce high reclaim stalls in the target application as the
allocations from the processes or the threads of the application can hit
the temporary memory.high limit.
- Userspace proactive reclaimers usually use feedback loops to decide
how much memory to proactively reclaim from a workload. The metrics
used for this are usually either refaults or PSI, and these metrics
will become messy if the application gets throttled by hitting the
high limit.
- memory.high is a stateful interface, if the userspace proactive
reclaimer crashes for any reason while triggering reclaim it can leave
the application in a bad state.
- If a workload is rapidly expanding, setting memory.high to proactively
reclaim memory can result in actually reclaiming more memory than
intended.
The benefits of such interface and shortcomings of existing interface
were further discussed in this RFC thread:
https://lore.kernel.org/linux-mm/[email protected]/
Interface:
----------
Introducing a very simple memcg interface 'echo 10M > memory.reclaim' to
trigger reclaim in the target memory cgroup.
The interface is introduced as a nested-keyed file to allow for future
optional arguments to be easily added to configure the behavior of
reclaim.
Possible Extensions:
--------------------
- This interface can be extended with an additional parameter or flags
to allow specifying one or more types of memory to reclaim from (e.g.
file, anon, ..).
- The interface can also be extended with a node mask to reclaim from
specific nodes. This has use cases for reclaim-based demotion in memory
tiering systens.
- A similar per-node interface can also be added to support proactive
reclaim and reclaim-based demotion in systems without memcg.
- Add a timeout parameter to make it easier for user space to call the
interface without worrying about being blocked for an undefined amount
of time.
For now, let's keep things simple by adding the basic functionality.
[[email protected]: refreshed to current master, updated commit
message based on recent discussions and use cases]
Signed-off-by: Shakeel Butt <[email protected]>
Signed-off-by: Yosry Ahmed <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Wei Xu <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
---
Documentation/admin-guide/cgroup-v2.rst | 21 ++++++++++++
mm/memcontrol.c | 44 +++++++++++++++++++++++++
2 files changed, 65 insertions(+)
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 69d7a6983f78..19bcd73cad03 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -1208,6 +1208,27 @@ PAGE_SIZE multiple when read back.
high limit is used and monitored properly, this limit's
utility is limited to providing the final safety net.
+ memory.reclaim
+ A write-only nested-keyed file which exists for all cgroups.
+
+ This is a simple interface to trigger memory reclaim in the
+ target cgroup.
+
+ This file accepts a single key, the number of bytes to reclaim.
+ No nested keys are currently supported.
+
+ Example::
+
+ echo "1G" > memory.reclaim
+
+ The interface can be later extended with nested keys to
+ configure the reclaim behavior. For example, specify the
+ type of memory to reclaim from (anon, file, ..).
+
+ Please note that the kernel can over or under reclaim from
+ the target cgroup. If less bytes are reclaimed than the
+ specified amount, -EAGAIN is returned.
+
memory.oom.group
A read-write single value file which exists on non-root
cgroups. The default value is "0".
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 725f76723220..041c17847769 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6355,6 +6355,45 @@ static ssize_t memory_oom_group_write(struct kernfs_open_file *of,
return nbytes;
}
+static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
+ size_t nbytes, loff_t off)
+{
+ struct mem_cgroup *memcg = mem_cgroup_from_css(of_css(of));
+ unsigned int nr_retries = MAX_RECLAIM_RETRIES;
+ unsigned long nr_to_reclaim, nr_reclaimed = 0;
+ int err;
+
+ buf = strstrip(buf);
+ err = page_counter_memparse(buf, "", &nr_to_reclaim);
+ if (err)
+ return err;
+
+ while (nr_reclaimed < nr_to_reclaim) {
+ unsigned long reclaimed;
+
+ if (signal_pending(current))
+ return -EINTR;
+
+ /* This is the final attempt, drain percpu lru caches in the
+ * hope of introducing more evictable pages for
+ * try_to_free_mem_cgroup_pages().
+ */
+ if (!nr_retries)
+ lru_add_drain_all();
+
+ reclaimed = try_to_free_mem_cgroup_pages(memcg,
+ nr_to_reclaim - nr_reclaimed,
+ GFP_KERNEL, true);
+
+ if (!reclaimed && !nr_retries--)
+ return -EAGAIN;
+
+ nr_reclaimed += reclaimed;
+ }
+
+ return nbytes;
+}
+
static struct cftype memory_files[] = {
{
.name = "current",
@@ -6413,6 +6452,11 @@ static struct cftype memory_files[] = {
.seq_show = memory_oom_group_show,
.write = memory_oom_group_write,
},
+ {
+ .name = "reclaim",
+ .flags = CFTYPE_NS_DELEGATABLE,
+ .write = memory_reclaim,
+ },
{ } /* terminate */
};
--
2.36.0.rc2.479.g8af0fa9b8e-goog
On Sat, Apr 23, 2022 at 6:30 AM Shakeel Butt <[email protected]> wrote:
>
> On Thu, Apr 21, 2022 at 11:44:23PM +0000, Yosry Ahmed wrote:
> > From: Shakeel Butt <[email protected]>
> [...]
> >
> > [[email protected]: refreshed to current master, updated commit
> > message based on recent discussions and use cases]
> > Signed-off-by: Shakeel Butt <[email protected]>
> > Signed-off-by: Yosry Ahmed <[email protected]>
>
> You should add "Co-developed-by" tag for yourself here.
>
> > Acked-by: Johannes Weiner <[email protected]>
> > Acked-by: Michal Hocko <[email protected]>
> > Acked-by: Wei Xu <[email protected]>
> > Acked-by: Roman Gushchin <[email protected]>
> > ---
> >
> [...]
> > +static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> > + size_t nbytes, loff_t off)
> > +{
> > + struct mem_cgroup *memcg = mem_cgroup_from_css(of_css(of));
> > + unsigned int nr_retries = MAX_RECLAIM_RETRIES;
> > + unsigned long nr_to_reclaim, nr_reclaimed = 0;
> > + int err;
> > +
> > + buf = strstrip(buf);
> > + err = page_counter_memparse(buf, "", &nr_to_reclaim);
> > + if (err)
> > + return err;
> > +
> > + while (nr_reclaimed < nr_to_reclaim) {
> > + unsigned long reclaimed;
> > +
> > + if (signal_pending(current))
> > + return -EINTR;
> > +
> > + /* This is the final attempt, drain percpu lru caches in the
>
> Fix the comment format. "/*" should be on its own line.
>
> > + * hope of introducing more evictable pages for
> > + * try_to_free_mem_cgroup_pages().
> > + */
>
> No need to send a new version if Andrew can fix these in the mm tree.
I will be sending v5 anyway to address your review comments on the
last patch. I will fix these as well. Thanks!
On Thu, Apr 21, 2022 at 11:44:23PM +0000, Yosry Ahmed wrote:
> From: Shakeel Butt <[email protected]>
[...]
>
> [[email protected]: refreshed to current master, updated commit
> message based on recent discussions and use cases]
> Signed-off-by: Shakeel Butt <[email protected]>
> Signed-off-by: Yosry Ahmed <[email protected]>
You should add "Co-developed-by" tag for yourself here.
> Acked-by: Johannes Weiner <[email protected]>
> Acked-by: Michal Hocko <[email protected]>
> Acked-by: Wei Xu <[email protected]>
> Acked-by: Roman Gushchin <[email protected]>
> ---
>
[...]
> +static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> + size_t nbytes, loff_t off)
> +{
> + struct mem_cgroup *memcg = mem_cgroup_from_css(of_css(of));
> + unsigned int nr_retries = MAX_RECLAIM_RETRIES;
> + unsigned long nr_to_reclaim, nr_reclaimed = 0;
> + int err;
> +
> + buf = strstrip(buf);
> + err = page_counter_memparse(buf, "", &nr_to_reclaim);
> + if (err)
> + return err;
> +
> + while (nr_reclaimed < nr_to_reclaim) {
> + unsigned long reclaimed;
> +
> + if (signal_pending(current))
> + return -EINTR;
> +
> + /* This is the final attempt, drain percpu lru caches in the
Fix the comment format. "/*" should be on its own line.
> + * hope of introducing more evictable pages for
> + * try_to_free_mem_cgroup_pages().
> + */
No need to send a new version if Andrew can fix these in the mm tree.