2018-10-16 14:58:36

by Lukasz Luba

[permalink] [raw]
Subject: [PATCH 07/11] DT: arm64: exynos7: add support for thermal trip irq-mode

This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.

Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Lukasz Luba <[email protected]>
---
arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
index d3301b8..39185af 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
@@ -11,40 +11,48 @@ trips {
temperature = <75000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-1 {
temperature = <80000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-2 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-3 {
temperature = <90000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-4 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-5 {
temperature = <100000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
+ irq-mode;
};
cpu-crit-0 {
temperature = <115000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
+ irq-mode;
};
};
--
2.7.4



2018-10-16 15:11:02

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH 07/11] DT: arm64: exynos7: add support for thermal trip irq-mode

On Tue, 16 Oct 2018 at 16:56, Lukasz Luba <[email protected]> wrote:
>
> This patch adds support for new flash which indicates
> that trip point triggers irq when temperature is met.
> Exynos5433 supports 8 trip point which will trigger irq.

Exynos7?

Beside that comments from previous email apply (no need to duplicate them).

Best regards,
Krzysztof