2018-06-06 09:35:37

by Clément Péron

[permalink] [raw]
Subject: [PATCH] ARM: dts: cygnus: Add HWRNG node

From: Clément Peron <[email protected]>

There is a HWRNG in Broadcom Cygnus SoC, so enable it.

Signed-off-by: Clément Peron <[email protected]>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 1cee40ac4613..b7178e84d56d 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -452,6 +452,11 @@
status = "disabled";
};

+ hwrng: hwrng@18032000 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x18032000 0x28>;
+ };
+
sdhci0: sdhci@18041000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x18041000 0x100>;
--
2.17.1



2018-06-06 16:06:32

by Scott Branden

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: cygnus: Add HWRNG node

Hi Clement,


On 18-06-06 02:34 AM, Clément Péron wrote:
> From: Clément Peron <[email protected]>
>
> There is a HWRNG in Broadcom Cygnus SoC, so enable it.
>
> Signed-off-by: Clément Peron <[email protected]>
Thanks for upstreaming some missing Cygnus components.

But, the problem is the tarball release from Broadcom you are extracting
these changes from does not contain git history; so, you are missing the
original authors and signed-off's.
I checked our internal git repository and for this commit the author is:
Mohamed Ismail Abdul Packir Mohamed <[email protected]>

Please adjust author and signed-off appropriately.  If there are other
changes you are extracting from the source tarballs you have please
contact me so we can construct patch appropriately.

Regards,
Scott
> ---
> arch/arm/boot/dts/bcm-cygnus.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 1cee40ac4613..b7178e84d56d 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -452,6 +452,11 @@
> status = "disabled";
> };
>
> + hwrng: hwrng@18032000 {
> + compatible = "brcm,iproc-rng200";
> + reg = <0x18032000 0x28>;
> + };
> +
> sdhci0: sdhci@18041000 {
> compatible = "brcm,sdhci-iproc-cygnus";
> reg = <0x18041000 0x100>;


2018-06-06 16:48:20

by Florian Fainelli

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: cygnus: Add HWRNG node

On 06/06/2018 09:03 AM, Scott Branden wrote:
> Hi Clement,
>
>
> On 18-06-06 02:34 AM, Clément Péron wrote:
>> From: Clément Peron <[email protected]>
>>
>> There is a HWRNG in Broadcom Cygnus SoC, so enable it.
>>
>> Signed-off-by: Clément Peron <[email protected]>
> Thanks for upstreaming some missing Cygnus components.
>
> But, the problem is the tarball release from Broadcom you are extracting
> these changes from does not contain git history; so, you are missing the
> original authors and signed-off's.
> I checked our internal git repository and for this commit the author is:
> Mohamed Ismail Abdul Packir Mohamed <[email protected]>
>
> Please adjust author and signed-off appropriately.  If there are other
> changes you are extracting from the source tarballs you have please
> contact me so we can construct patch appropriately.

If you want the original author's Signed-off-by to be preserved, why
don't you extract it from your internal git tree and submit the patch on
Mohamed's behalf?

AFAICT what Clement is doing here is permissible given the Linux
developer certificate of origin though I am not a lawyer of course.
--
Florian

2018-06-06 17:08:46

by Clément Péron

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: cygnus: Add HWRNG node

Hi Scott, Florian,

On Wed, 6 Jun 2018 at 18:47, Florian Fainelli <[email protected]> wrote:
>
> On 06/06/201 8 09:03 AM, Scott Branden wrote:
> > Hi Clement,
> >
> >
> > On 18-06-06 02:34 AM, Clément Péron wrote:
> >> From: Clément Peron <[email protected]>
> >>
> >> There is a HWRNG in Broadcom Cygnus SoC, so enable it.
> >>
> >> Signed-off-by: Clément Peron <[email protected]>
> > Thanks for upstreaming some missing Cygnus components.
> >
> > But, the problem is the tarball release from Broadcom you are extracting
> > these changes from does not contain git history; so, you are missing the
> > original authors and signed-off's.
> > I checked our internal git repository and for this commit the author is:
> > Mohamed Ismail Abdul Packir Mohamed <[email protected]>
> >
> > Please adjust author and signed-off appropriately. If there are other
> > changes you are extracting from the source tarballs you have please
> > contact me so we can construct patch appropriately.
>
> If you want the original author's Signed-off-by to be preserved, why
> don't you extract it from your internal git tree and submit the patch on
> Mohamed's behalf?
>
> AFAICT what Clement is doing here is permissible given the Linux
> developer certificate of origin though I am not a lawyer of course.
> --
> Florian

Totally not my goal to steal the author and agree to keep track of the
original author
as soon as it's possible. I didn't though it was important for this
patch as the same
code is available in the dt-bindings documentation.

Actually there are still some buggy components like DSA (Arun proposed
a patch this morning)
the PWM (config and delay aren't correct) and I2C. These are mainlined
but can't be used
and need a minimal effort to correctly work on Cygnus.

Also there are some important components like USB Phy or Mailbox that
were proposed and
almost made it, but just need a small modification to be accepted.

My idea was just to submit small patches that are trivial to review.
In order to avoid keeping
lots of patches in our kernel and also have something functional when
building a mainline kernel.

Regards,
Clement

2018-06-06 17:15:01

by Scott Branden

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: cygnus: Add HWRNG node



On 18-06-06 09:47 AM, Florian Fainelli wrote:
> On 06/06/2018 09:03 AM, Scott Branden wrote:
>> Hi Clement,
>>
>>
>> On 18-06-06 02:34 AM, Clément Péron wrote:
>>> From: Clément Peron <[email protected]>
>>>
>>> There is a HWRNG in Broadcom Cygnus SoC, so enable it.
>>>
>>> Signed-off-by: Clément Peron <[email protected]>
>> Thanks for upstreaming some missing Cygnus components.
>>
>> But, the problem is the tarball release from Broadcom you are extracting
>> these changes from does not contain git history; so, you are missing the
>> original authors and signed-off's.
>> I checked our internal git repository and for this commit the author is:
>> Mohamed Ismail Abdul Packir Mohamed <[email protected]>
>>
>> Please adjust author and signed-off appropriately.  If there are other
>> changes you are extracting from the source tarballs you have please
>> contact me so we can construct patch appropriately.
> If you want the original author's Signed-off-by to be preserved, why
> don't you extract it from your internal git tree and submit the patch on
> Mohamed's behalf?
Sure, I can submit the original patch to keep things simple and avoid
finding a lawyer right now.
>
> AFAICT what Clement is doing here is permissible given the Linux
> developer certificate of origin though I am not a lawyer of course.
But, It would be great to get some guidance and clarification on this
for sure.
I'm reading:
https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html

The change was created entirely by Broadcom, so seems difficult for
somebody else to upstream change without appropriate authorship and
signed off from copyright holder.  Point a) and b) are not met in
Developer's Certificate of Origin while point c) is being attempted
(without a or b being certified).





2018-06-06 17:33:46

by Florian Fainelli

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: cygnus: Add HWRNG node

On 06/06/2018 10:14 AM, Scott Branden wrote:
>
>
> On 18-06-06 09:47 AM, Florian Fainelli wrote:
>> On 06/06/2018 09:03 AM, Scott Branden wrote:
>>> Hi Clement,
>>>
>>>
>>> On 18-06-06 02:34 AM, Clément Péron wrote:
>>>> From: Clément Peron <[email protected]>
>>>>
>>>> There is a HWRNG in Broadcom Cygnus SoC, so enable it.
>>>>
>>>> Signed-off-by: Clément Peron <[email protected]>
>>> Thanks for upstreaming some missing Cygnus components.
>>>
>>> But, the problem is the tarball release from Broadcom you are extracting
>>> these changes from does not contain git history; so, you are missing the
>>> original authors and signed-off's.
>>> I checked our internal git repository and for this commit the author is:
>>> Mohamed Ismail Abdul Packir Mohamed <[email protected]>
>>>
>>> Please adjust author and signed-off appropriately.  If there are other
>>> changes you are extracting from the source tarballs you have please
>>> contact me so we can construct patch appropriately.
>> If you want the original author's Signed-off-by to be preserved, why
>> don't you extract it from your internal git tree and submit the patch on
>> Mohamed's behalf?
> Sure, I can submit the original patch to keep things simple and avoid
> finding a lawyer right now.
>>
>> AFAICT what Clement is doing here is permissible given the Linux
>> developer certificate of origin though I am not a lawyer of course.
> But, It would be great to get some guidance and clarification on this
> for sure.
> I'm reading:
> https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html
>
> The change was created entirely by Broadcom, so seems difficult for
> somebody else to upstream change without appropriate authorship and
> signed off from copyright holder.

Indeed, but it is effectively Broadcom's fault for not providing a git
tree for the customer to pull from in order to preserve the original
authorship, if what was distributed is a tarball of changes against a
vanilla kernel (which is likely to be the case), then all author
attributions are lost.

Not suggesting you change how you deliver code to customers, we have the
same issue in the STB/CM group, except maybe customers care less about
upstreaming so we can do it ourselves at our own pace and using our own
attributions.

> Point a) and b) are not met in
> Developer's Certificate of Origin while point c) is being attempted
> (without a or b being certified).

I would think that point a) and b) are met by the very fact that the
Cygnus kernel port is GPLv2 code, being a derivative work of the Linux
kernel, and that should be enough.

This is kind of well established things, this has happened for many
Broadcom product lines unfortunately because not everyone is active like
you in getting things upstreamed. Those contributions were still
entirely valid and acceptable for the kernel community.

Maybe we do need a lawyer, Saul Goodman, are you here?
--
Florian

2018-06-06 18:51:25

by Scott Branden

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: cygnus: Add HWRNG node



On 18-06-06 10:06 AM, Clément Péron wrote:
> Hi Scott, Florian,
>
> On Wed, 6 Jun 2018 at 18:47, Florian Fainelli <[email protected]> wrote:
>> On 06/06/201 8 09:03 AM, Scott Branden wrote:
>>> Hi Clement,
>>>
>>>
>>> On 18-06-06 02:34 AM, Clément Péron wrote:
>>>> From: Clément Peron <[email protected]>
>>>>
>>>> There is a HWRNG in Broadcom Cygnus SoC, so enable it.
>>>>
>>>> Signed-off-by: Clément Peron <[email protected]>
>>> Thanks for upstreaming some missing Cygnus components.
>>>
>>> But, the problem is the tarball release from Broadcom you are extracting
>>> these changes from does not contain git history; so, you are missing the
>>> original authors and signed-off's.
>>> I checked our internal git repository and for this commit the author is:
>>> Mohamed Ismail Abdul Packir Mohamed <[email protected]>
>>>
>>> Please adjust author and signed-off appropriately. If there are other
>>> changes you are extracting from the source tarballs you have please
>>> contact me so we can construct patch appropriately.
>> If you want the original author's Signed-off-by to be preserved, why
>> don't you extract it from your internal git tree and submit the patch on
>> Mohamed's behalf?
>>
>> AFAICT what Clement is doing here is permissible given the Linux
>> developer certificate of origin though I am not a lawyer of course.
>> --
>> Florian
> Totally not my goal to steal the author and agree to keep track of the
> original author
> as soon as it's possible. I didn't though it was important for this
> patch as the same
> code is available in the dt-bindings documentation.
>
> Actually there are still some buggy components like DSA (Arun proposed
> a patch this morning)
> the PWM (config and delay aren't correct) and I2C. These are mainlined
> but can't be used
> and need a minimal effort to correctly work on Cygnus.
We have internal versions of most everything.  It's a matter of getting
people to push the appropriate patches out for upstream version to work.
Please contact the bcm-kernel-feedback list with issues and we can work
through common solution (or, likely already have a solution just not
upstreamed).
>
> Also there are some important components like USB Phy or Mailbox that
> were proposed and
> almost made it, but just need a small modification to be accepted.
Again - we may have internal solution already.  Yes, mailbox was
submitted upstream a long time ago and I think got stalled being
accepted upstream.  We can work through upstream solution by starting
with sending to bcm-kernel-feedback-list to discuss details.
>
> My idea was just to submit small patches that are trivial to review.
> In order to avoid keeping
> lots of patches in our kernel and also have something functional when
> building a mainline kernel.
I understand the difficulty you would have if you're trying to work with
a different kernel version in our release.  If you send me a list
directly of the drivers you use in Cygnus that will help me get those
changes prioritized to be pushed upstream.  And/or we can work together
on that.
>
> Regards,
> Clement
Thanks,
 Scott