On Tue, Apr 2, 2013 at 11:47 PM, Pat Erley <[email protected]> wrote:
> On 04/02/2013 10:50 AM, Andrew Cooks wrote:
>>
>> On 2 Apr 2013 15:37, "Pat Erley" <[email protected]
>> <mailto:[email protected]>> wrote:
>> >
>> > On 03/07/2013 09:35 PM, Andrew Cooks wrote:
>> >>
>> >> --- a/drivers/pci/quirks.c
>> >> +++ b/drivers/pci/quirks.c
>> >>
>> >> +/* Table of multiple (ghost) source functions. This is similar to the
>> >> + * translated sources above, but with the following differences:
>> >> + * 1. the device may use multiple functions as DMA sources,
>> >> + * 2. these functions cannot be assumed to be actual devices,
>> they're simply
>> >> + * incorrect DMA tags.
>> >> + * 3. the specific ghost function for a request can not always be
>> predicted.
>> >> + * For example, the actual device could be xx:yy.1 and it could use
>> >> + * both 0 and 1 for different requests, with no obvious way to tell
>> when
>> >> + * DMA will be tagged as comming from xx.yy.0 and and when it will
>> be tagged
>> >> + * as comming from xx.yy.1.
>> >> + * The bitmap contains all of the functions used in DMA tags,
>> including the
>> >> + * actual device.
>> >> + * See https://bugzilla.redhat.com/show_bug.cgi?id=757166,
>> >> + * https://bugzilla.kernel.org/show_bug.cgi?id=42679
>> >> + * https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768
>> >> + */
>> >> +static const struct pci_dev_dma_multi_func_sources {
>> >> + u16 vendor;
>> >> + u16 device;
>> >> + u8 func_map; /* bit map. lsb is fn 0. */
>> >> +} pci_dev_dma_multi_func_sources[] = {
>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9123, (1<<0)|(1<<1)},
>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9125, (1<<0)|(1<<1)},
>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9128, (1<<0)|(1<<1)},
>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9130, (1<<0)|(1<<1)},
>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9143, (1<<0)|(1<<1)},
>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9172, (1<<0)|(1<<1)},
>> >> + { 0 }
>> >> +};
>> >
>> >
>> > Adding another buggy device. I have a Ricoh multifunction device:
>> >
>> > 17:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev
>> 01)
>> > 17:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394
>> > Controller (rev 01)
>> >
>> > 17:00.0 0805: 1180:e822 (rev 01)
>> > 17:00.3 0c00: 1180:e832 (rev 01)
>> >
>>
>> The Ricoh device issue has been known for some time and a quirk has been
>> available since commit 12ea6cad1c7d046 in June 2012. It's slightly
>> different than the problem this patch tries to work around [1].
>
>
> Hmm, I've had this problem with many recent (vanilla) kernels, up to and
> including 3.9-rc5
>
>
>> > that adding entries for also fixed booting. I don't have any SD
>> cards or firewire devices handy to test that they work, but the system
>> now boots, which was not the case without your patch and IOMMU/DMAR
>> enabled.
>>
>> That is really strange. Could you tell us what kernel version you tested
>> and provide dmesg output?
>
>
> I'll capture a vanilla 3.8.5 boot without any patches and iommu=off, then
> try to find another machine to catch what I can of a netconsole boot with
> iommu=on. What's the preferred way to send these? pastebin links?
>
> I'd been running the 'dirty' fix that's in the redhat bugzilla entry. I
> checked my .config and have CONFIG_PCI_QUIRKS=y, and verified my devices are
> in the quirks table for the pci_func_0_dma_source fixup.
>
Do you mean that even though your hardware is specifically listed in
the quirk table, the quirk simply hasn't worked for you? That would be
unfortunate, to say the least.
The fedora kernel included a separate patch for this issue until
recently (see https://bugzilla.redhat.com/show_bug.cgi?id=880051). It
basically just disabled DMAR when the Ricoh device is present, the
same as the patch to the mailing list you mentioned.
Is the dirty fix you're referring to comment 7?
https://bugzilla.redhat.com/show_bug.cgi?id=605888#c7
>>
>> [1] In the Ricoh case, multiple functions are used for real devices and
>> the bug is that these devices all use function 0 during DMA. In this
>> particular case, I'd expect the FireWire device 17:00.3 to issue DMA
>> from the SD Host Controller address 17:00.0. The quirk is not too much
>> of a terrible hack - it's a fairly simple translation.
>>
>> In the Marvell case, the real device uses DMA source tags that don't
>> actually belong to any visible devices. The quirk to make this work is
>> more invasive, not nearly as elegant and has not attracted much
>> enthusiasm from subsystem maintainers, though I'm still hopeful that a
>> quirk will be merged in some form or another.
>>
>
> Thanks for explaining the difference!
>
> Pat
On 04/05/2013 12:44 AM, Andrew Cooks wrote:
> On Tue, Apr 2, 2013 at 11:47 PM, Pat Erley <[email protected]> wrote:
>> On 04/02/2013 10:50 AM, Andrew Cooks wrote:
>>>
>>> On 2 Apr 2013 15:37, "Pat Erley" <[email protected]
>>> <mailto:[email protected]>> wrote:
>>> >
>>> > On 03/07/2013 09:35 PM, Andrew Cooks wrote:
>>> >>
>>> >> --- a/drivers/pci/quirks.c
>>> >> +++ b/drivers/pci/quirks.c
>>> >>
>>> >> +/* Table of multiple (ghost) source functions. This is similar to the
>>> >> + * translated sources above, but with the following differences:
>>> >> + * 1. the device may use multiple functions as DMA sources,
>>> >> + * 2. these functions cannot be assumed to be actual devices,
>>> they're simply
>>> >> + * incorrect DMA tags.
>>> >> + * 3. the specific ghost function for a request can not always be
>>> predicted.
>>> >> + * For example, the actual device could be xx:yy.1 and it could use
>>> >> + * both 0 and 1 for different requests, with no obvious way to tell
>>> when
>>> >> + * DMA will be tagged as comming from xx.yy.0 and and when it will
>>> be tagged
>>> >> + * as comming from xx.yy.1.
>>> >> + * The bitmap contains all of the functions used in DMA tags,
>>> including the
>>> >> + * actual device.
>>> >> + * See https://bugzilla.redhat.com/show_bug.cgi?id=757166,
>>> >> + * https://bugzilla.kernel.org/show_bug.cgi?id=42679
>>> >> + * https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768
>>> >> + */
>>> >> +static const struct pci_dev_dma_multi_func_sources {
>>> >> + u16 vendor;
>>> >> + u16 device;
>>> >> + u8 func_map; /* bit map. lsb is fn 0. */
>>> >> +} pci_dev_dma_multi_func_sources[] = {
>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9123, (1<<0)|(1<<1)},
>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9125, (1<<0)|(1<<1)},
>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9128, (1<<0)|(1<<1)},
>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9130, (1<<0)|(1<<1)},
>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9143, (1<<0)|(1<<1)},
>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9172, (1<<0)|(1<<1)},
>>> >> + { 0 }
>>> >> +};
>>> >
>>> >
>>> > Adding another buggy device. I have a Ricoh multifunction device:
>>> >
>>> > 17:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev
>>> 01)
>>> > 17:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394
>>> > Controller (rev 01)
>>> >
>>> > 17:00.0 0805: 1180:e822 (rev 01)
>>> > 17:00.3 0c00: 1180:e832 (rev 01)
>>> >
>>>
>>> The Ricoh device issue has been known for some time and a quirk has been
>>> available since commit 12ea6cad1c7d046 in June 2012. It's slightly
>>> different than the problem this patch tries to work around [1].
>>
>>
>> Hmm, I've had this problem with many recent (vanilla) kernels, up to and
>> including 3.9-rc5
>>
>>
>>> > that adding entries for also fixed booting. I don't have any SD
>>> cards or firewire devices handy to test that they work, but the system
>>> now boots, which was not the case without your patch and IOMMU/DMAR
>>> enabled.
>>>
>>> That is really strange. Could you tell us what kernel version you tested
>>> and provide dmesg output?
>>
>>
>> I'll capture a vanilla 3.8.5 boot without any patches and iommu=off, then
>> try to find another machine to catch what I can of a netconsole boot with
>> iommu=on. What's the preferred way to send these? pastebin links?
>>
>> I'd been running the 'dirty' fix that's in the redhat bugzilla entry. I
>> checked my .config and have CONFIG_PCI_QUIRKS=y, and verified my devices are
>> in the quirks table for the pci_func_0_dma_source fixup.
>>
> Do you mean that even though your hardware is specifically listed in
> the quirk table, the quirk simply hasn't worked for you? That would be
> unfortunate, to say the least.
Precisely.
> The fedora kernel included a separate patch for this issue until
> recently (see https://bugzilla.redhat.com/show_bug.cgi?id=880051). It
> basically just disabled DMAR when the Ricoh device is present, the
> same as the patch to the mailing list you mentioned.
Yes, that's what I've been avoiding doing. Every new release, I boot
once with iommu=on, and firewire blacklisted, boot up, load the firewire
driver. This has caused the 'Ricoh DMAR' bug on every kernel since I
got the laptop. I then reboot and ....
> Is the dirty fix you're referring to comment 7?
> https://bugzilla.redhat.com/show_bug.cgi?id=605888#c7
Apply this patch, which has worked fine for me, but per a commend in a
thread I created here on 10/19/2012[1], this has a potential significant
performance impact. In my use case, a performance hit is worth the cost
for the features.
However, your patch(while not intended to be the fix), actually solves
the issue on my machine. I don't know if it also has the potential
performance impact, but it's certainly not noticeably worse in my use case.
Pat Erley
[1] http://marc.info/?l=linux-pci&m=135094489232548&w=2
On 04/05/2013 01:50 AM, Pat Erley wrote:
> On 04/05/2013 12:44 AM, Andrew Cooks wrote:
>> On Tue, Apr 2, 2013 at 11:47 PM, Pat Erley <[email protected]> wrote:
>>> On 04/02/2013 10:50 AM, Andrew Cooks wrote:
>>>>
>>>> On 2 Apr 2013 15:37, "Pat Erley" <[email protected]
>>>> <mailto:[email protected]>> wrote:
>>>> >
>>>> > On 03/07/2013 09:35 PM, Andrew Cooks wrote:
>>>> >>
>>>> >> --- a/drivers/pci/quirks.c
>>>> >> +++ b/drivers/pci/quirks.c
>>>> >>
>>>> >> +/* Table of multiple (ghost) source functions. This is similar
>>>> to the
>>>> >> + * translated sources above, but with the following differences:
>>>> >> + * 1. the device may use multiple functions as DMA sources,
>>>> >> + * 2. these functions cannot be assumed to be actual devices,
>>>> they're simply
>>>> >> + * incorrect DMA tags.
>>>> >> + * 3. the specific ghost function for a request can not always be
>>>> predicted.
>>>> >> + * For example, the actual device could be xx:yy.1 and it
>>>> could use
>>>> >> + * both 0 and 1 for different requests, with no obvious way to
>>>> tell
>>>> when
>>>> >> + * DMA will be tagged as comming from xx.yy.0 and and when it
>>>> will
>>>> be tagged
>>>> >> + * as comming from xx.yy.1.
>>>> >> + * The bitmap contains all of the functions used in DMA tags,
>>>> including the
>>>> >> + * actual device.
>>>> >> + * See https://bugzilla.redhat.com/show_bug.cgi?id=757166,
>>>> >> + * https://bugzilla.kernel.org/show_bug.cgi?id=42679
>>>> >> + * https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768
>>>> >> + */
>>>> >> +static const struct pci_dev_dma_multi_func_sources {
>>>> >> + u16 vendor;
>>>> >> + u16 device;
>>>> >> + u8 func_map; /* bit map. lsb is fn 0. */
>>>> >> +} pci_dev_dma_multi_func_sources[] = {
>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9123, (1<<0)|(1<<1)},
>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9125, (1<<0)|(1<<1)},
>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9128, (1<<0)|(1<<1)},
>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9130, (1<<0)|(1<<1)},
>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9143, (1<<0)|(1<<1)},
>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9172, (1<<0)|(1<<1)},
>>>> >> + { 0 }
>>>> >> +};
>>>> >
>>>> >
>>>> > Adding another buggy device. I have a Ricoh multifunction device:
>>>> >
>>>> > 17:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller
>>>> (rev
>>>> 01)
>>>> > 17:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394
>>>> > Controller (rev 01)
>>>> >
>>>> > 17:00.0 0805: 1180:e822 (rev 01)
>>>> > 17:00.3 0c00: 1180:e832 (rev 01)
>>>> >
>>>>
>>>> The Ricoh device issue has been known for some time and a quirk has
>>>> been
>>>> available since commit 12ea6cad1c7d046 in June 2012. It's slightly
>>>> different than the problem this patch tries to work around [1].
>>>
>>>
>>> Hmm, I've had this problem with many recent (vanilla) kernels, up to and
>>> including 3.9-rc5
>>>
>>>
>>>> > that adding entries for also fixed booting. I don't have any SD
>>>> cards or firewire devices handy to test that they work, but the system
>>>> now boots, which was not the case without your patch and IOMMU/DMAR
>>>> enabled.
>>>>
>>>> That is really strange. Could you tell us what kernel version you
>>>> tested
>>>> and provide dmesg output?
>>>
>>>
>>> I'll capture a vanilla 3.8.5 boot without any patches and iommu=off,
>>> then
>>> try to find another machine to catch what I can of a netconsole boot
>>> with
>>> iommu=on. What's the preferred way to send these? pastebin links?
>>>
>>> I'd been running the 'dirty' fix that's in the redhat bugzilla entry. I
>>> checked my .config and have CONFIG_PCI_QUIRKS=y, and verified my
>>> devices are
>>> in the quirks table for the pci_func_0_dma_source fixup.
>>>
>> Do you mean that even though your hardware is specifically listed in
>> the quirk table, the quirk simply hasn't worked for you? That would be
>> unfortunate, to say the least.
>
> Precisely.
>
>> The fedora kernel included a separate patch for this issue until
>> recently (see https://bugzilla.redhat.com/show_bug.cgi?id=880051). It
>> basically just disabled DMAR when the Ricoh device is present, the
>> same as the patch to the mailing list you mentioned.
>
> Yes, that's what I've been avoiding doing. Every new release, I boot
> once with iommu=on, and firewire blacklisted, boot up, load the firewire
> driver. This has caused the 'Ricoh DMAR' bug on every kernel since I
> got the laptop. I then reboot and ....
>
>> Is the dirty fix you're referring to comment 7?
>> https://bugzilla.redhat.com/show_bug.cgi?id=605888#c7
>
> Apply this patch, which has worked fine for me, but per a commend in a
> thread I created here on 10/19/2012[1], this has a potential significant
> performance impact. In my use case, a performance hit is worth the cost
> for the features.
>
> However, your patch(while not intended to be the fix), actually solves
> the issue on my machine. I don't know if it also has the potential
> performance impact, but it's certainly not noticeably worse in my use case.
>
> Pat Erley
>
> [1] http://marc.info/?l=linux-pci&m=135094489232548&w=2
As a follow up, I still have this problem in 3.10.0-rc1+ (and the patch
by Andrew to fix buggy dma source devices still fixes it).
Andrew, have you done anything with your DMA source patch since you last
posted it? I'm still using it and it still makes my computer happy.
I'd happily switch to a newer revision of the patch instead of carrying
a rebased version of what you posted in March.
Pat Erley
On Wed, May 15, 2013 at 12:40 PM, Pat Erley <[email protected]> wrote:
> On 04/05/2013 01:50 AM, Pat Erley wrote:
>>
>> On 04/05/2013 12:44 AM, Andrew Cooks wrote:
>>>
>>> On Tue, Apr 2, 2013 at 11:47 PM, Pat Erley <[email protected]> wrote:
>>>>
>>>> On 04/02/2013 10:50 AM, Andrew Cooks wrote:
>>>>>
>>>>>
>>>>> On 2 Apr 2013 15:37, "Pat Erley" <[email protected]
>>>>> <mailto:[email protected]>> wrote:
>>>>> >
>>>>> > On 03/07/2013 09:35 PM, Andrew Cooks wrote:
>>>>> >>
>>>>> >> --- a/drivers/pci/quirks.c
>>>>> >> +++ b/drivers/pci/quirks.c
>>>>> >>
>>>>> >> +/* Table of multiple (ghost) source functions. This is similar
>>>>> to the
>>>>> >> + * translated sources above, but with the following differences:
>>>>> >> + * 1. the device may use multiple functions as DMA sources,
>>>>> >> + * 2. these functions cannot be assumed to be actual devices,
>>>>> they're simply
>>>>> >> + * incorrect DMA tags.
>>>>> >> + * 3. the specific ghost function for a request can not always be
>>>>> predicted.
>>>>> >> + * For example, the actual device could be xx:yy.1 and it
>>>>> could use
>>>>> >> + * both 0 and 1 for different requests, with no obvious way to
>>>>> tell
>>>>> when
>>>>> >> + * DMA will be tagged as comming from xx.yy.0 and and when it
>>>>> will
>>>>> be tagged
>>>>> >> + * as comming from xx.yy.1.
>>>>> >> + * The bitmap contains all of the functions used in DMA tags,
>>>>> including the
>>>>> >> + * actual device.
>>>>> >> + * See https://bugzilla.redhat.com/show_bug.cgi?id=757166,
>>>>> >> + * https://bugzilla.kernel.org/show_bug.cgi?id=42679
>>>>> >> + * https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768
>>>>> >> + */
>>>>> >> +static const struct pci_dev_dma_multi_func_sources {
>>>>> >> + u16 vendor;
>>>>> >> + u16 device;
>>>>> >> + u8 func_map; /* bit map. lsb is fn 0. */
>>>>> >> +} pci_dev_dma_multi_func_sources[] = {
>>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9123, (1<<0)|(1<<1)},
>>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9125, (1<<0)|(1<<1)},
>>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9128, (1<<0)|(1<<1)},
>>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9130, (1<<0)|(1<<1)},
>>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9143, (1<<0)|(1<<1)},
>>>>> >> + { PCI_VENDOR_ID_MARVELL_2, 0x9172, (1<<0)|(1<<1)},
>>>>> >> + { 0 }
>>>>> >> +};
>>>>> >
>>>>> >
>>>>> > Adding another buggy device. I have a Ricoh multifunction device:
>>>>> >
>>>>> > 17:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller
>>>>> (rev
>>>>> 01)
>>>>> > 17:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394
>>>>> > Controller (rev 01)
>>>>> >
>>>>> > 17:00.0 0805: 1180:e822 (rev 01)
>>>>> > 17:00.3 0c00: 1180:e832 (rev 01)
>>>>> >
>>>>>
>>>>> The Ricoh device issue has been known for some time and a quirk has
>>>>> been
>>>>> available since commit 12ea6cad1c7d046 in June 2012. It's slightly
>>>>> different than the problem this patch tries to work around [1].
>>>>
>>>>
>>>>
>>>> Hmm, I've had this problem with many recent (vanilla) kernels, up to and
>>>> including 3.9-rc5
>>>>
>>>>
>>>>> > that adding entries for also fixed booting. I don't have any SD
>>>>> cards or firewire devices handy to test that they work, but the system
>>>>> now boots, which was not the case without your patch and IOMMU/DMAR
>>>>> enabled.
>>>>>
>>>>> That is really strange. Could you tell us what kernel version you
>>>>> tested
>>>>> and provide dmesg output?
>>>>
>>>>
>>>>
>>>> I'll capture a vanilla 3.8.5 boot without any patches and iommu=off,
>>>> then
>>>> try to find another machine to catch what I can of a netconsole boot
>>>> with
>>>> iommu=on. What's the preferred way to send these? pastebin links?
>>>>
>>>> I'd been running the 'dirty' fix that's in the redhat bugzilla entry. I
>>>> checked my .config and have CONFIG_PCI_QUIRKS=y, and verified my
>>>> devices are
>>>> in the quirks table for the pci_func_0_dma_source fixup.
>>>>
>>> Do you mean that even though your hardware is specifically listed in
>>> the quirk table, the quirk simply hasn't worked for you? That would be
>>> unfortunate, to say the least.
>>
>>
>> Precisely.
>>
>>> The fedora kernel included a separate patch for this issue until
>>> recently (see https://bugzilla.redhat.com/show_bug.cgi?id=880051). It
>>> basically just disabled DMAR when the Ricoh device is present, the
>>> same as the patch to the mailing list you mentioned.
>>
>>
>> Yes, that's what I've been avoiding doing. Every new release, I boot
>> once with iommu=on, and firewire blacklisted, boot up, load the firewire
>> driver. This has caused the 'Ricoh DMAR' bug on every kernel since I
>> got the laptop. I then reboot and ....
>>
>>> Is the dirty fix you're referring to comment 7?
>>> https://bugzilla.redhat.com/show_bug.cgi?id=605888#c7
>>
>>
>> Apply this patch, which has worked fine for me, but per a commend in a
>> thread I created here on 10/19/2012[1], this has a potential significant
>> performance impact. In my use case, a performance hit is worth the cost
>> for the features.
>>
>> However, your patch(while not intended to be the fix), actually solves
>> the issue on my machine. I don't know if it also has the potential
>> performance impact, but it's certainly not noticeably worse in my use
>> case.
>>
>> Pat Erley
>>
>> [1] http://marc.info/?l=linux-pci&m=135094489232548&w=2
>
>
> As a follow up, I still have this problem in 3.10.0-rc1+ (and the patch by
> Andrew to fix buggy dma source devices still fixes it).
>
> Andrew, have you done anything with your DMA source patch since you last
> posted it? I'm still using it and it still makes my computer happy. I'd
> happily switch to a newer revision of the patch instead of carrying a
> rebased version of what you posted in March.
>
> Pat Erley
>
I haven't made any major changes since early April and about 5 people
reported success with this patch series.
Since our last exchange I learnt that the existing Ricoh quirk fixes
the code path used with iommu groups and vfio, but not the normal
device driver dma code path with iommu enabled. So with iommu enabled,
you can potentially pass the Ricoh devices to a VM, but you can't load
the driver in the host kernel.
I believe the long term objective is to build the logic to handle
devices with dma quirks into the iommu groups code and to change the
'normal' dma code path to take iommu groups into account. I'm not sure
if anyone else is actively working on this, but I haven't made any
real progress with it.
Now that I've managed to get hold of a Thinkpad with one of these
Ricoh devices and understand the issue a bit better, I'll add support
for it and send an updated patch set, but I don't have much hope of it
being merged.
Regards,
Andrew