2018-03-07 14:08:41

by James Hogan

[permalink] [raw]
Subject: [PATCH] kbuild: Handle builtin dtb files containing hyphens

On dtb files which contain hyphens, the dt_S_dtb command to build the
dtb.S files (which allow DTB files to be built into the kernel) results
in errors like the following:

bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'

This is due to the hyphen being used in symbol names. Replace all
hyphens with underscores in the dt_S_dtb command to avoid this problem.

Quite a lot of dts files have hyphens, but its only a problem on MIPS
where such files can be built into the kernel. For example when
CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is
used (in the latter case it admitedly shouldn't really build all the
dtb.o files, but thats a separate issue).

Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Frank Rowand <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # 4.9+
---
scripts/Makefile.lib | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 5589bae34af6..a6f538b31ad6 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -297,11 +297,11 @@ cmd_dt_S_dtb= \
echo '\#include <asm-generic/vmlinux.lds.h>'; \
echo '.section .dtb.init.rodata,"a"'; \
echo '.balign STRUCT_ALIGNMENT'; \
- echo '.global __dtb_$(*F)_begin'; \
- echo '__dtb_$(*F)_begin:'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
+ echo '__dtb_$(subst -,_,$(*F))_begin:'; \
echo '.incbin "$<" '; \
- echo '__dtb_$(*F)_end:'; \
- echo '.global __dtb_$(*F)_end'; \
+ echo '__dtb_$(subst -,_,$(*F))_end:'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_end'; \
echo '.balign STRUCT_ALIGNMENT'; \
) > $@

--
2.13.6



2018-03-07 20:12:50

by Frank Rowand

[permalink] [raw]
Subject: Re: [PATCH] kbuild: Handle builtin dtb files containing hyphens

I initially misread the patch description (and imagined an entirely
different problem).


On 03/07/18 06:06, James Hogan wrote:
> On dtb files which contain hyphens, the dt_S_dtb command to build the> dtb.S files (which allow DTB files to be built into the kernel) results> in errors like the following:> > bcm3368-netgear-cvg834g.dtb.S: Assembler messages:> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
Please replace the following section:

> This is due to the hyphen being used in symbol names. Replace all
> hyphens
> with underscores in the dt_S_dtb command to avoid this problem.
>
> Quite a lot of dts files have hyphens, but its only a problem on MIPS
> where such files can be built into the kernel. For example when
> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is
> used (in the latter case it admitedly shouldn't really build all the
> dtb.o files, but thats a separate issue).

with:

cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image.
This assembly source contains labels before and after the binary data.
The label names incorporate the file name of the corresponding .dtb
file. Hyphens are not legal characters in labels, so transform all
hyphens from the file name to underscores when constructing the labels.

>
> Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
> Signed-off-by: James Hogan <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Frank Rowand <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Michal Marek <[email protected]>
> Cc: Ralf Baechle <[email protected]>
> Cc: Florian Fainelli <[email protected]>
> Cc: Kevin Cernekee <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: <[email protected]> # 4.9+
> ---
> scripts/Makefile.lib | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index 5589bae34af6..a6f538b31ad6 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -297,11 +297,11 @@ cmd_dt_S_dtb= \
> echo '\#include <asm-generic/vmlinux.lds.h>'; \
> echo '.section .dtb.init.rodata,"a"'; \
> echo '.balign STRUCT_ALIGNMENT'; \
> - echo '.global __dtb_$(*F)_begin'; \
> - echo '__dtb_$(*F)_begin:'; \
> + echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
> + echo '__dtb_$(subst -,_,$(*F))_begin:'; \
> echo '.incbin "$<" '; \
> - echo '__dtb_$(*F)_end:'; \
> - echo '.global __dtb_$(*F)_end'; \
> + echo '__dtb_$(subst -,_,$(*F))_end:'; \
> + echo '.global __dtb_$(subst -,_,$(*F))_end'; \
> echo '.balign STRUCT_ALIGNMENT'; \
> ) > $@
>
>

Reviewed-by: Frank Rowand <[email protected]>

2018-03-07 20:26:46

by James Hogan

[permalink] [raw]
Subject: Re: [PATCH] kbuild: Handle builtin dtb files containing hyphens

On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote:
> I initially misread the patch description (and imagined an entirely
> different problem).
>
>
> On 03/07/18 06:06, James Hogan wrote:
> > On dtb files which contain hyphens, the dt_S_dtb command to build the> dtb.S files (which allow DTB files to be built into the kernel) results> in errors like the following:> > bcm3368-netgear-cvg834g.dtb.S: Assembler messages:> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
> Please replace the following section:
>
> > This is due to the hyphen being used in symbol names. Replace all
> > hyphens
> > with underscores in the dt_S_dtb command to avoid this problem.
> >
> > Quite a lot of dts files have hyphens, but its only a problem on MIPS
> > where such files can be built into the kernel. For example when
> > CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is
> > used (in the latter case it admitedly shouldn't really build all the
> > dtb.o files, but thats a separate issue).
>
> with:
>
> cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
> FDT (that is, the .dtb file) as binary data in the kernel image.
> This assembly source contains labels before and after the binary data.
> The label names incorporate the file name of the corresponding .dtb
> file. Hyphens are not legal characters in labels, so transform all
> hyphens from the file name to underscores when constructing the labels.

Thanks, that is clearer.

I'll keep the paragraph about MIPS and the example configuration though,
as I think its important information to reproduce the problem, and to
justify why it wouldn't be appropriate to just rename the files (which
was my first reaction).

> Reviewed-by: Frank Rowand <[email protected]>

Thanks
James


Attachments:
(No filename) (2.26 kB)
signature.asc (849.00 B)
Digital signature
Download all attachments

2018-03-07 23:20:44

by Frank Rowand

[permalink] [raw]
Subject: Re: [PATCH] kbuild: Handle builtin dtb files containing hyphens

On 03/07/18 12:25, James Hogan wrote:
> On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote:
>> I initially misread the patch description (and imagined an entirely
>> different problem).
>>
>>
>> On 03/07/18 06:06, James Hogan wrote:
>>> On dtb files which contain hyphens, the dt_S_dtb command to build the> dtb.S files (which allow DTB files to be built into the kernel) results> in errors like the following:> > bcm3368-netgear-cvg834g.dtb.S: Assembler messages:> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
>> Please replace the following section:
>>
>>> This is due to the hyphen being used in symbol names. Replace all
>>> hyphens
>>> with underscores in the dt_S_dtb command to avoid this problem.
>>>
>>> Quite a lot of dts files have hyphens, but its only a problem on MIPS
>>> where such files can be built into the kernel. For example when
>>> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is
>>> used (in the latter case it admitedly shouldn't really build all the
>>> dtb.o files, but thats a separate issue).
>>
>> with:
>>
>> cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
>> FDT (that is, the .dtb file) as binary data in the kernel image.
>> This assembly source contains labels before and after the binary data.
>> The label names incorporate the file name of the corresponding .dtb
>> file. Hyphens are not legal characters in labels, so transform all
>> hyphens from the file name to underscores when constructing the labels.
>
> Thanks, that is clearer.
>
> I'll keep the paragraph about MIPS and the example configuration though,
> as I think its important information to reproduce the problem, and to
> justify why it wouldn't be appropriate to just rename the files (which
> was my first reaction).

Other than the part that says "its only a problem on MIPS". That is
pedantically correct because no other architecture (that I am aware
of, not that I searched) currently has a devicetree source file name
with a hyphen in it, where that file is compiled into the kernel as
an asm file. But it is potentially a problem on any architecture
to it is misleading to label it as MIPS only.


>
>> Reviewed-by: Frank Rowand <[email protected]>
>
> Thanks
> James
>


2018-03-08 06:58:05

by Frank Rowand

[permalink] [raw]
Subject: Re: [PATCH] kbuild: Handle builtin dtb files containing hyphens

On 03/07/18 06:06, James Hogan wrote:
> On dtb files which contain hyphens, the dt_S_dtb command to build the
> dtb.S files (which allow DTB files to be built into the kernel) results
> in errors like the following:

< snip >

Hi James,

Sorry for dribbling my comments out in so many emails. :-)

Please change the subject line to say "dtb filenames" instead
of "dtb files".

Thanks,

Frank

2018-03-08 07:12:08

by James Hogan

[permalink] [raw]
Subject: Re: [PATCH] kbuild: Handle builtin dtb files containing hyphens

On Wed, Mar 07, 2018 at 03:19:11PM -0800, Frank Rowand wrote:
> On 03/07/18 12:25, James Hogan wrote:
> > On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote:
> >> On 03/07/18 06:06, James Hogan wrote:
> >>> Quite a lot of dts files have hyphens, but its only a problem on MIPS
> >>> where such files can be built into the kernel. For example when
> >>> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is
> >>> used (in the latter case it admitedly shouldn't really build all the
> >>> dtb.o files, but thats a separate issue).

> > I'll keep the paragraph about MIPS and the example configuration though,
> > as I think its important information to reproduce the problem, and to
> > justify why it wouldn't be appropriate to just rename the files (which
> > was my first reaction).
>
> Other than the part that says "its only a problem on MIPS". That is
> pedantically correct because no other architecture (that I am aware
> of, not that I searched) currently has a devicetree source file name
> with a hyphen in it, where that file is compiled into the kernel as
> an asm file. But it is potentially a problem on any architecture
> to it is misleading to label it as MIPS only.

Okay I'll reword to make it clearer and do a v2.

Thanks
James


Attachments:
(No filename) (1.27 kB)
signature.asc (849.00 B)
Digital signature
Download all attachments

2018-03-08 08:43:19

by Masahiro Yamada

[permalink] [raw]
Subject: Re: [PATCH] kbuild: Handle builtin dtb files containing hyphens

2018-03-08 16:09 GMT+09:00 James Hogan <[email protected]>:
> On Wed, Mar 07, 2018 at 03:19:11PM -0800, Frank Rowand wrote:
>> On 03/07/18 12:25, James Hogan wrote:
>> > On Wed, Mar 07, 2018 at 12:11:41PM -0800, Frank Rowand wrote:
>> >> On 03/07/18 06:06, James Hogan wrote:
>> >>> Quite a lot of dts files have hyphens, but its only a problem on MIPS
>> >>> where such files can be built into the kernel. For example when
>> >>> CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is
>> >>> used (in the latter case it admitedly shouldn't really build all the
>> >>> dtb.o files, but thats a separate issue).
>
>> > I'll keep the paragraph about MIPS and the example configuration though,
>> > as I think its important information to reproduce the problem, and to
>> > justify why it wouldn't be appropriate to just rename the files (which
>> > was my first reaction).
>>
>> Other than the part that says "its only a problem on MIPS". That is
>> pedantically correct because no other architecture (that I am aware
>> of, not that I searched) currently has a devicetree source file name
>> with a hyphen in it, where that file is compiled into the kernel as
>> an asm file. But it is potentially a problem on any architecture
>> to it is misleading to label it as MIPS only.
>
> Okay I'll reword to make it clearer and do a v2.
>
> Thanks
> James


The code looks good.
If you send v2, I can shortly apply it to the fixes branch.

If possible, I want to send a PR this weekend.



--
Best Regards
Masahiro Yamada

2018-03-08 11:04:45

by James Hogan

[permalink] [raw]
Subject: [PATCH v2] kbuild: Handle builtin dtb file names containing hyphens

cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:

bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'

Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.

As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).

Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <[email protected]>
Reviewed-by: Frank Rowand <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # 4.9+
---
Changes in v2:
- Rewrite commit message (thanks Frank for some improved wording).
- Add Franks' reviewed-by.
---
scripts/Makefile.lib | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 5589bae34af6..a6f538b31ad6 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -297,11 +297,11 @@ cmd_dt_S_dtb= \
echo '\#include <asm-generic/vmlinux.lds.h>'; \
echo '.section .dtb.init.rodata,"a"'; \
echo '.balign STRUCT_ALIGNMENT'; \
- echo '.global __dtb_$(*F)_begin'; \
- echo '__dtb_$(*F)_begin:'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
+ echo '__dtb_$(subst -,_,$(*F))_begin:'; \
echo '.incbin "$<" '; \
- echo '__dtb_$(*F)_end:'; \
- echo '.global __dtb_$(*F)_end'; \
+ echo '__dtb_$(subst -,_,$(*F))_end:'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_end'; \
echo '.balign STRUCT_ALIGNMENT'; \
) > $@

--
2.13.6


2018-03-08 16:27:54

by Masahiro Yamada

[permalink] [raw]
Subject: Re: [PATCH v2] kbuild: Handle builtin dtb file names containing hyphens

2018-03-08 20:02 GMT+09:00 James Hogan <[email protected]>:
> cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
> FDT (that is, the .dtb file) as binary data in the kernel image. This
> assembly source contains labels before and after the binary data. The
> label names incorporate the file name of the corresponding .dtb file.
> Hyphens are not legal characters in labels, so .dtb files built into the
> kernel with hyphens in the file name result in errors like the
> following:
>
> bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
> bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
> bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
> bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
> bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
> bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
> bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
>
> Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
> name to underscores when constructing the labels.
>
> As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
> contain hyphens in their names, but the issue only currently manifests
> on Broadcom MIPS platforms, as that is the only place where such files
> are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
> or on BMIPS kernels when the dtbs target is used (in the latter case it
> admittedly shouldn't really build all the dtb.o files, but thats a
> separate issue).
>
> Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
> Signed-off-by: James Hogan <[email protected]>
> Reviewed-by: Frank Rowand <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Michal Marek <[email protected]>
> Cc: Ralf Baechle <[email protected]>
> Cc: Florian Fainelli <[email protected]>
> Cc: Kevin Cernekee <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: <[email protected]> # 4.9+
> ---
> Changes in v2:
> - Rewrite commit message (thanks Frank for some improved wording).
> - Add Franks' reviewed-by.

Applied to linux-kbuild/fixes. Thanks!

--
Best Regards
Masahiro Yamada