Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
into the Linux image: in the same manner as Canaan soc does, create an object
file from the dtb file that will get linked into the Linux image.
Signed-off-by: Alexandre Ghiti <[email protected]>
---
arch/riscv/boot/dts/microchip/Makefile | 1 +
arch/riscv/boot/dts/sifive/Makefile | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index 622b12771fd3..855c1502d912 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
index 74c47fe9fc22..d90e4eb0ade8 100644
--- a/arch/riscv/boot/dts/sifive/Makefile
+++ b/arch/riscv/boot/dts/sifive/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \
hifive-unmatched-a00.dtb
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
--
2.30.2
On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
>
> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
> into the Linux image: in the same manner as Canaan soc does, create an object
> file from the dtb file that will get linked into the Linux image.
>
> Signed-off-by: Alexandre Ghiti <[email protected]>
Along the same lines as the comment that Jisheng Zhang made on the fixed
address, building a dtb into the kernel itself fundamentally breaks generic
kernel images.
I can understand using it on K210, which is extremely limited and wouldn't
run a generic kernel anyway, but for normal platforms like microchip and
sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
and require a non-broken boot loader.
Arnd
On Fri, 04 Jun 2021 06:08:05 PDT (-0700), Arnd Bergmann wrote:
> On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
>>
>> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
>> into the Linux image: in the same manner as Canaan soc does, create an object
>> file from the dtb file that will get linked into the Linux image.
>>
>> Signed-off-by: Alexandre Ghiti <[email protected]>
>
> Along the same lines as the comment that Jisheng Zhang made on the fixed
> address, building a dtb into the kernel itself fundamentally breaks generic
> kernel images.
>
> I can understand using it on K210, which is extremely limited and wouldn't
> run a generic kernel anyway, but for normal platforms like microchip and
> sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
> and require a non-broken boot loader.
When we first added BUILTIN_DTB we actually had a compatibility
mechanism in there. There isn't enough in the ISA to handle board
compatibility, but we were hoping to get something to deal with that.
It didn't pan out so we dropped the compatibility mechanism, which is
how we ended up here.
Maybe the right thing to do here is to add some sort of "be compatible
with the platform spec" Kconfig, which we could then use to disallow all
these features that result in non-portable kernels?
Hey Arnd,
On Fri, Jun 4, 2021 at 3:18 PM Arnd Bergmann <[email protected]> wrote:
>
> On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
> >
> > Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
> > into the Linux image: in the same manner as Canaan soc does, create an object
> > file from the dtb file that will get linked into the Linux image.
> >
> > Signed-off-by: Alexandre Ghiti <[email protected]>
>
> Along the same lines as the comment that Jisheng Zhang made on the fixed
> address, building a dtb into the kernel itself fundamentally breaks generic
> kernel images.
>
> I can understand using it on K210, which is extremely limited and wouldn't
> run a generic kernel anyway, but for normal platforms like microchip and
> sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
> and require a non-broken boot loader.
can't quite agree here. If we take XIP, it does make sense to have
BUILTIN_DTB, since 1) this will not be a generic kernel anyway 2) we
may want to skip the bootloader altogether or at least make it as thin
as possible and 3) copying device tree binaries from bootloader to RAM
as opposed to having it handy compiled in the kernel will be just a
waste of RAM.
Best regards,
Vitaly
> Arnd
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
On Fri, Jun 4, 2021 at 5:51 PM Palmer Dabbelt <[email protected]> wrote:
> On Fri, 04 Jun 2021 06:08:05 PDT (-0700), Arnd Bergmann wrote:
> > On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
> >>
> >> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
> >> into the Linux image: in the same manner as Canaan soc does, create an object
> >> file from the dtb file that will get linked into the Linux image.
> >>
> >> Signed-off-by: Alexandre Ghiti <[email protected]>
> >
> > Along the same lines as the comment that Jisheng Zhang made on the fixed
> > address, building a dtb into the kernel itself fundamentally breaks generic
> > kernel images.
> >
> > I can understand using it on K210, which is extremely limited and wouldn't
> > run a generic kernel anyway, but for normal platforms like microchip and
> > sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
> > and require a non-broken boot loader.
>
> When we first added BUILTIN_DTB we actually had a compatibility
> mechanism in there. There isn't enough in the ISA to handle board
> compatibility, but we were hoping to get something to deal with that.
> It didn't pan out so we dropped the compatibility mechanism, which is
> how we ended up here.
>
> Maybe the right thing to do here is to add some sort of "be compatible
> with the platform spec" Kconfig, which we could then use to disallow all
> these features that result in non-portable kernels?
Yes, I should have read your email before I replied with the same
suggestion to Vitaly ;-)
Arnd
On Fri, Jun 4, 2021 at 7:45 PM Vitaly Wool <[email protected]> wrote:
> On Fri, Jun 4, 2021 at 3:18 PM Arnd Bergmann <[email protected]> wrote:
> > On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
> > >
> > > Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
> > > into the Linux image: in the same manner as Canaan soc does, create an object
> > > file from the dtb file that will get linked into the Linux image.
> > >
> > > Signed-off-by: Alexandre Ghiti <[email protected]>
> >
> > Along the same lines as the comment that Jisheng Zhang made on the fixed
> > address, building a dtb into the kernel itself fundamentally breaks generic
> > kernel images.
> >
> > I can understand using it on K210, which is extremely limited and wouldn't
> > run a generic kernel anyway, but for normal platforms like microchip and
> > sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
> > and require a non-broken boot loader.
>
> can't quite agree here. If we take XIP, it does make sense to have
> BUILTIN_DTB, since 1) this will not be a generic kernel anyway 2) we
> may want to skip the bootloader altogether or at least make it as thin
> as possible and 3) copying device tree binaries from bootloader to RAM
> as opposed to having it handy compiled in the kernel will be just a
> waste of RAM.
Indeed, it does make sense in combination with XIP. Maybe there could
be a Kconfig option that depends on CONFIG_EXPERT and that can
be used to guard non-generic options like this?
Arnd
Hi Arnd,
Le 4/06/2021 ? 15:08, Arnd Bergmann a ?crit?:
> On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
>>
>> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
>> into the Linux image: in the same manner as Canaan soc does, create an object
>> file from the dtb file that will get linked into the Linux image.
>>
>> Signed-off-by: Alexandre Ghiti <[email protected]>
>
> Along the same lines as the comment that Jisheng Zhang made on the fixed
> address, building a dtb into the kernel itself fundamentally breaks generic
> kernel images.
>
> I can understand using it on K210, which is extremely limited and wouldn't
> run a generic kernel anyway, but for normal platforms like microchip and
> sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
> and require a non-broken boot loader.
I kind of disagree because if I want to build a custom kernel for those
platforms with a builtin dtb for some reasons (debug, development..Etc),
I think I should be able to do so.
>
> Arnd
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
On Sat, Jun 5, 2021 at 8:37 AM Alex Ghiti <[email protected]> wrote:
> Le 4/06/2021 à 15:08, Arnd Bergmann a écrit :
> > On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
> >>
> >> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
> >> into the Linux image: in the same manner as Canaan soc does, create an object
> >> file from the dtb file that will get linked into the Linux image.
> >>
> >> Signed-off-by: Alexandre Ghiti <[email protected]>
> >
> > Along the same lines as the comment that Jisheng Zhang made on the fixed
> > address, building a dtb into the kernel itself fundamentally breaks generic
> > kernel images.
> >
> > I can understand using it on K210, which is extremely limited and wouldn't
> > run a generic kernel anyway, but for normal platforms like microchip and
> > sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
> > and require a non-broken boot loader.
>
> I kind of disagree because if I want to build a custom kernel for those
> platforms with a builtin dtb for some reasons (debug, development..Etc),
> I think I should be able to do so.
How is the builtin dtb better than appended dtb, or passing the dtb to the
boot loader in that case?
Arnd
Le 5/06/2021 à 13:00, Arnd Bergmann a écrit :
> On Sat, Jun 5, 2021 at 8:37 AM Alex Ghiti <[email protected]> wrote:
>> Le 4/06/2021 à 15:08, Arnd Bergmann a écrit :
>>> On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
>>>>
>>>> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
>>>> into the Linux image: in the same manner as Canaan soc does, create an object
>>>> file from the dtb file that will get linked into the Linux image.
>>>>
>>>> Signed-off-by: Alexandre Ghiti <[email protected]>
>>>
>>> Along the same lines as the comment that Jisheng Zhang made on the fixed
>>> address, building a dtb into the kernel itself fundamentally breaks generic
>>> kernel images.
>>>
>>> I can understand using it on K210, which is extremely limited and wouldn't
>>> run a generic kernel anyway, but for normal platforms like microchip and
>>> sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
>>> and require a non-broken boot loader.
>>
>> I kind of disagree because if I want to build a custom kernel for those
>> platforms with a builtin dtb for some reasons (debug, development..Etc),
>> I think I should be able to do so.
>
> How is the builtin dtb better than appended dtb, or passing the dtb to the
> boot loader in that case?
Ah never said it was better, just it was available so there is no reason
we could not allow it :)
>
> Arnd
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
On Sun, 06 Jun 2021 00:40:34 PDT (-0700), [email protected] wrote:
> Le 5/06/2021 à 13:00, Arnd Bergmann a écrit :
>> On Sat, Jun 5, 2021 at 8:37 AM Alex Ghiti <[email protected]> wrote:
>>> Le 4/06/2021 à 15:08, Arnd Bergmann a écrit :
>>>> On Fri, Jun 4, 2021 at 2:06 PM Alexandre Ghiti <[email protected]> wrote:
>>>>>
>>>>> Fix BUILTIN_DTB config which resulted in a dtb that was actually not built
>>>>> into the Linux image: in the same manner as Canaan soc does, create an object
>>>>> file from the dtb file that will get linked into the Linux image.
>>>>>
>>>>> Signed-off-by: Alexandre Ghiti <[email protected]>
>>>>
>>>> Along the same lines as the comment that Jisheng Zhang made on the fixed
>>>> address, building a dtb into the kernel itself fundamentally breaks generic
>>>> kernel images.
>>>>
>>>> I can understand using it on K210, which is extremely limited and wouldn't
>>>> run a generic kernel anyway, but for normal platforms like microchip and
>>>> sifive, it would be better to disallow CONFIG_BUILTIN_DTB in Kconfig
>>>> and require a non-broken boot loader.
>>>
>>> I kind of disagree because if I want to build a custom kernel for those
>>> platforms with a builtin dtb for some reasons (debug, development..Etc),
>>> I think I should be able to do so.
>>
>> How is the builtin dtb better than appended dtb, or passing the dtb to the
>> boot loader in that case?
>
> Ah never said it was better, just it was available so there is no reason
> we could not allow it :)
I agree: I'm not really a fan of BUILTIN_DTB (and I tried pretty hard
not to have it in the first place), but whatever we have shouldn't be
broken.
This is on fixes.