2017-09-06 08:08:05

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v4 0/3] arm: npcm: add basic support for Nuvoton BMCs

Addressed comments from:
- Joel: https://www.spinics.net/lists/arm-kernel/msg605137.html

Changes since previous update:
- Added SMP and SMP_ON_UP
- Changed dts to use phandle


2017-09-06 08:08:19

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v4 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture

Add maintainers and reviewers for the Nuvoton NPCM architecture.

Signed-off-by: Brendan Higgins <[email protected]>
Reviewed-by: Tomer Maimon <[email protected]>
Reviewed-by: Avi Fishman <[email protected]>
---
MAINTAINERS | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 44cb004c765d..67064bf11904 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1598,6 +1598,19 @@ F: drivers/pinctrl/nomadik/
F: drivers/i2c/busses/i2c-nomadik.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git

+ARM/NUVOTON NPCM ARCHITECTURE
+M: Avi Fishman <[email protected]>
+M: Tomer Maimon <[email protected]>
+R: Brendan Higgins <[email protected]>
+R: Rick Altherr <[email protected]>
+L: [email protected] (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-npcm/
+F: arch/arm/boot/dts/nuvoton-npcm*
+F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F: drivers/*/*npcm*
+F: Documentation/*/*npcm*
+
ARM/NUVOTON W90X900 ARM ARCHITECTURE
M: Wan ZongShun <[email protected]>
L: [email protected] (moderated for non-subscribers)
--
2.14.1.581.gf28d330327-goog

2017-09-06 08:08:38

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v4 2/3] arm: dts: add Nuvoton NPCM750 device tree

Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.

Signed-off-by: Brendan Higgins <[email protected]>
Reviewed-by: Tomer Maimon <[email protected]>
Reviewed-by: Avi Fishman <[email protected]>
Tested-by: Tomer Maimon <[email protected]>
Tested-by: Avi Fishman <[email protected]>
---
.../arm/cpu-enable-method/nuvoton,npcm7xx-smp | 42 +++++
.../devicetree/bindings/arm/npcm/npcm.txt | 6 +
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 57 +++++++
arch/arm/boot/dts/nuvoton-npcm750.dtsi | 177 +++++++++++++++++++++
include/dt-bindings/clock/nuvoton,npcm7xx-clks.h | 39 +++++
5 files changed, 321 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi
create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h

diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
new file mode 100644
index 000000000000..e81f85b400cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
@@ -0,0 +1,42 @@
+=========================================================
+Secondary CPU enable-method "nuvoton,npcm7xx-smp" binding
+=========================================================
+
+To apply to all CPUs, a single "nuvoton,npcm7xx-smp" enable method should be
+defined in the "cpus" node.
+
+Enable method name: "nuvoton,npcm7xx-smp"
+Compatible machines: "nuvoton,npcm750"
+Compatible CPUs: "arm,cortex-a9"
+Related properties: (none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"nuvoton,npcm750-gcr".
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "nuvoton,npcm7xx-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk NPCM7XX_CLK_CPU>;
+ clock-names = "clk_cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk NPCM7XX_CLK_CPU>;
+ clock-names = "clk_cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
new file mode 100644
index 000000000000..2d87d9ecea85
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
@@ -0,0 +1,6 @@
+NPCM Platforms Device Tree Bindings
+-----------------------------------
+NPCM750 SoC
+Required root node properties:
+ - compatible = "nuvoton,npcm750";
+
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
new file mode 100644
index 000000000000..e54a870d3ee0
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -0,0 +1,57 @@
+/*
+ * DTS file for all NPCM750 SoCs
+ *
+ * Copyright 2012 Tomer Maimon <[email protected]>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+
+/ {
+ model = "Nuvoton npcm750 Development Board (Device Tree)";
+ compatible = "nuvoton,npcm750";
+
+ chosen {
+ stdout-path = &serial3;
+ bootargs = "earlyprintk=serial,serial3,115200";
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ cpus {
+ enable-method = "nuvoton,npcm7xx-smp";
+ };
+};
+
+&clk {
+ status = "okay";
+};
+
+&watchdog1 {
+ status = "okay";
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
new file mode 100644
index 000000000000..bca96b3ae9d3
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -0,0 +1,177 @@
+/*
+ * DTSi file for the NPCM750 SoC
+ *
+ * Copyright 2012 Tomer Maimon <[email protected]>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/nuvoton,npcm7xx-clks.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk NPCM7XX_CLK_CPU>;
+ clock-names = "clk_cpu";
+ reg = <0>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk NPCM7XX_CLK_CPU>;
+ clock-names = "clk_cpu";
+ reg = <1>;
+ next-level-cache = <&l2>;
+ };
+ };
+
+ gcr: gcr@f0800000 {
+ compatible = "nuvoton,npcm750-gcr", "syscon",
+ "simple-mfd";
+ reg = <0xf0800000 0x1000>;
+ };
+
+ scu: scu@f03fe000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xf03fe000 0x1000>;
+ };
+
+ l2: l2-cache@f03fc000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xf03fc000 0x1000>;
+ interrupts = <0 21 4>;
+ cache-unified;
+ cache-level = <2>;
+ clocks = <&clk NPCM7XX_CLK_AXI>;
+ };
+
+ gic: interrupt-controller@f03ff000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xf03ff000 0x1000>,
+ <0xf03fe100 0x100>;
+ };
+
+ clk: clock-controller@f0801000 {
+ compatible = "nuvoton,npcm750-clk";
+ #clock-cells = <1>;
+ reg = <0xf0801000 0x1000>;
+ };
+
+ /* external clock signal rg1refck, supplied by the phy */
+ clk-rg1refck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ /* external clock signal rg2refck, supplied by the phy */
+ clk-rg2refck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk-xin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ timer@f03fe600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xf03fe600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ timer0: timer@f0000000 {
+ compatible = "nuvoton,npcm750-timer";
+ interrupts = <0 32 4>;
+ reg = <0xf0000000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+ };
+
+ watchdog0: watchdog@f0008000 {
+ compatible = "nuvoton,npcm750-wdt";
+ interrupts = <0 47 4>;
+ reg = <0xf0008000 0x1000>;
+ status = "disabled";
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+ };
+
+ watchdog1: watchdog@f0009000 {
+ compatible = "nuvoton,npcm750-wdt";
+ interrupts = <0 48 4>;
+ reg = <0xf0009000 0x1000>;
+ status = "disabled";
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+ };
+
+ watchdog2: watchdog@f000a000 {
+ compatible = "nuvoton,npcm750-wdt";
+ interrupts = <0 49 4>;
+ reg = <0xf000a000 0x1000>;
+ status = "disabled";
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+ };
+
+ serial0: serial0@f0001000 {
+ compatible = "nuvoton,npcm750-uart";
+ reg = <0xf0001000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+ interrupts = <0 2 4>;
+ status = "disabled";
+ };
+
+ serial1: serial1@f0002000 {
+ compatible = "nuvoton,npcm750-uart";
+ reg = <0xf0002000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+ interrupts = <0 3 4>;
+ status = "disabled";
+ };
+
+ serial2: serial2@f0003000 {
+ compatible = "nuvoton,npcm750-uart";
+ reg = <0xf0003000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+ interrupts = <0 4 4>;
+ status = "disabled";
+ };
+
+ serial3: serial3@f0004000 {
+ compatible = "nuvoton,npcm750-uart";
+ reg = <0xf0004000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+ interrupts = <0 5 4>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
new file mode 100644
index 000000000000..c69d3bbf7e42
--- /dev/null
+++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2016 Nuvoton Technologies, [email protected]
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#ifndef _DT_BINDINGS_CLK_NPCM7XX_H
+#define _DT_BINDINGS_CLK_NPCM7XX_H
+
+#define NPCM7XX_CLK_PLL0 0
+#define NPCM7XX_CLK_PLL1 1
+#define NPCM7XX_CLK_PLL2 2
+#define NPCM7XX_CLK_GFX 3
+#define NPCM7XX_CLK_APB1 4
+#define NPCM7XX_CLK_APB2 5
+#define NPCM7XX_CLK_APB3 6
+#define NPCM7XX_CLK_APB4 7
+#define NPCM7XX_CLK_APB5 8
+#define NPCM7XX_CLK_MC 9
+#define NPCM7XX_CLK_CPU 10
+#define NPCM7XX_CLK_SPI0 11
+#define NPCM7XX_CLK_SPI3 12
+#define NPCM7XX_CLK_SPIX 13
+#define NPCM7XX_CLK_UART_CORE 14
+#define NPCM7XX_CLK_TIMER 15
+#define NPCM7XX_CLK_HOST_UART 16
+#define NPCM7XX_CLK_MMC 17
+#define NPCM7XX_CLK_SDHC 18
+#define NPCM7XX_CLK_ADC 19
+#define NPCM7XX_CLK_GFX_MEM 20
+#define NPCM7XX_CLK_USB_BRIDGE 21
+#define NPCM7XX_CLK_AXI 22
+#define NPCM7XX_CLK_AHB 23
+#define NPCM7XX_CLK_EMC 24
+#define NPCM7XX_CLK_GMAC 25
+
+#endif
--
2.14.1.581.gf28d330327-goog

2017-09-06 08:08:55

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v4 1/3] arm: npcm: add basic support for Nuvoton BMCs

Adds basic support for the Nuvoton NPCM750 BMC.

Signed-off-by: Brendan Higgins <[email protected]>
---
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/mach-npcm/Kconfig | 50 +++++++++++++++++++++++++
arch/arm/mach-npcm/Makefile | 3 ++
arch/arm/mach-npcm/headsmp.S | 17 +++++++++
arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++
arch/arm/mach-npcm/platsmp.c | 89 ++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 196 insertions(+)
create mode 100644 arch/arm/mach-npcm/Kconfig
create mode 100644 arch/arm/mach-npcm/Makefile
create mode 100644 arch/arm/mach-npcm/headsmp.S
create mode 100644 arch/arm/mach-npcm/npcm7xx.c
create mode 100644 arch/arm/mach-npcm/platsmp.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 61a0cb15067e..05543f1cfbde 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"

source "arch/arm/mach-nomadik/Kconfig"

+source "arch/arm/mach-npcm/Kconfig"
+
source "arch/arm/mach-nspire/Kconfig"

source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 47d3a1ab08d2..60ca50c7d762 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OXNAS) += oxnas
machine-$(CONFIG_ARCH_OMAP1) += omap1
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
new file mode 100644
index 000000000000..d47061855439
--- /dev/null
+++ b/arch/arm/mach-npcm/Kconfig
@@ -0,0 +1,50 @@
+menuconfig ARCH_NPCM
+ bool "Nuvoton NPCM Architecture"
+ select ARCH_REQUIRE_GPIOLIB
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_NPCM7XX
+
+if ARCH_NPCM
+
+comment "NPCMX50 CPU type"
+
+config CPU_NPCM750
+ depends on ARCH_NPCM && ARCH_MULTI_V7
+ bool "Support for NPCM750 BMC CPU (Poleg)"
+ select CACHE_L2X0
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select SMP
+ select SMP_ON_UP
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select ARM_ERRATA_458693
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_742231
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369
+ select ARM_ERRATA_794072
+ select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
+ select USB_EHCI_ROOT_HUB_TT
+ select USB_ARCH_HAS_HCD
+ select USB_ARCH_HAS_EHCI
+ select USB_EHCI_HCD
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_HCD
+ select USB
+ select FIQ
+ select CPU_USE_DOMAINS
+ select GENERIC_CLOCKEVENTS
+ select CLKDEV_LOOKUP
+ select COMMON_CLK if OF
+ select NPCM750_TIMER
+ select MFD_SYSCON
+ help
+ Support for NPCM750 BMC CPU (Poleg).
+
+ Nuvoton NPCM750 BMC based on the Cortex A9.
+
+endif
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
new file mode 100644
index 000000000000..78416055b854
--- /dev/null
+++ b/arch/arm/mach-npcm/Makefile
@@ -0,0 +1,3 @@
+AFLAGS_headsmp.o += -march=armv7-a
+
+obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
new file mode 100644
index 000000000000..9fccbbd49ed4
--- /dev/null
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+ENTRY(npcm7xx_secondary_startup)
+ safe_svcmode_maskall r0
+
+ b secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
new file mode 100644
index 000000000000..132e9d587857
--- /dev/null
+++ b/arch/arm/mach-npcm/npcm7xx.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2017 Nuvoton Technology corporation.
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \
+ L310_AUX_CTRL_DATA_PREFETCH | \
+ L310_AUX_CTRL_NS_LOCKDOWN | \
+ L310_AUX_CTRL_CACHE_REPLACE_RR | \
+ L2C_AUX_CTRL_SHARED_OVERRIDE | \
+ L310_AUX_CTRL_FULL_LINE_ZERO)
+
+static const char *const npcm7xx_dt_match[] = {
+ "nuvoton,npcm750",
+ NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
+ .atag_offset = 0x100,
+ .dt_compat = npcm7xx_dt_match,
+ .l2c_aux_val = NPCM7XX_AUX_VAL,
+ .l2c_aux_mask = ~NPCM7XX_AUX_VAL,
+MACHINE_END
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
new file mode 100644
index 000000000000..144e3e7ec7e6
--- /dev/null
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "PLATSMP: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+extern void npcm7xx_secondary_startup(void);
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ struct device_node *gcr_np;
+ void __iomem *gcr_base;
+ int ret = 0;
+
+ gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+ if (!gcr_np) {
+ pr_err("no gcr device node\n");
+ ret = -EFAULT;
+ goto out;
+ }
+ gcr_base = of_iomap(gcr_np, 0);
+ if (!gcr_base) {
+ pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
+ ret = -EFAULT;
+ goto out;
+ }
+
+ /* give boot ROM kernel start address. */
+ iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
+ NPCM7XX_SCRPAD_REG);
+ /* make sure npcm7xx_secondary_startup is seen by all observers. */
+ smp_wmb();
+ dsb_sev();
+ /* make sure write buffer is drained */
+ mb();
+
+out:
+ iounmap(gcr_base);
+ return ret;
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *scu_np;
+ void __iomem *scu_base;
+
+ scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!scu_np) {
+ pr_err("no scu device node\n");
+ return;
+ }
+ scu_base = of_iomap(scu_np, 0);
+ if (!scu_base) {
+ pr_err("could not iomap scu at: 0x%llx\n", scu_base);
+ return;
+ }
+
+ scu_enable(scu_base);
+
+out:
+ iounmap(scu_base);
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+ .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+ .smp_boot_secondary = npcm7xx_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops);
--
2.14.1.581.gf28d330327-goog

2017-09-06 21:04:12

by Avi Fishman

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] arm: npcm: add basic support for Nuvoton BMCs

Sorry for sending again some mailing list rejected it due to HTML
involved (althoug I tried Plain Text), Trying again.

2017-09-06 11:07 GMT+03:00 Brendan Higgins <[email protected]>:
> Adds basic support for the Nuvoton NPCM750 BMC.
>
> Signed-off-by: Brendan Higgins <[email protected]>
> ---
> arch/arm/Kconfig | 2 +
> arch/arm/Makefile | 1 +
> arch/arm/mach-npcm/Kconfig | 50 +++++++++++++++++++++++++
> arch/arm/mach-npcm/Makefile | 3 ++
> arch/arm/mach-npcm/headsmp.S | 17 +++++++++
> arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++
> arch/arm/mach-npcm/platsmp.c | 89 ++++++++++++++++++++++++++++++++++++++++++++
> 7 files changed, 196 insertions(+)
> create mode 100644 arch/arm/mach-npcm/Kconfig
> create mode 100644 arch/arm/mach-npcm/Makefile
> create mode 100644 arch/arm/mach-npcm/headsmp.S
> create mode 100644 arch/arm/mach-npcm/npcm7xx.c
> create mode 100644 arch/arm/mach-npcm/platsmp.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 61a0cb15067e..05543f1cfbde 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
>
> source "arch/arm/mach-nomadik/Kconfig"
>
> +source "arch/arm/mach-npcm/Kconfig"
> +
> source "arch/arm/mach-nspire/Kconfig"
>
> source "arch/arm/plat-omap/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 47d3a1ab08d2..60ca50c7d762 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
> machine-$(CONFIG_ARCH_MXS) += mxs
> machine-$(CONFIG_ARCH_NETX) += netx
> machine-$(CONFIG_ARCH_NOMADIK) += nomadik
> +machine-$(CONFIG_ARCH_NPCM) += npcm
> machine-$(CONFIG_ARCH_NSPIRE) += nspire
> machine-$(CONFIG_ARCH_OXNAS) += oxnas
> machine-$(CONFIG_ARCH_OMAP1) += omap1
> diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
> new file mode 100644
> index 000000000000..d47061855439
> --- /dev/null
> +++ b/arch/arm/mach-npcm/Kconfig
> @@ -0,0 +1,50 @@
> +menuconfig ARCH_NPCM
> + bool "Nuvoton NPCM Architecture"
> + select ARCH_REQUIRE_GPIOLIB
> + select USE_OF
> + select PINCTRL
> + select PINCTRL_NPCM7XX
> +
> +if ARCH_NPCM
> +
> +comment "NPCMX50 CPU type"
> +
> +config CPU_NPCM750
> + depends on ARCH_NPCM && ARCH_MULTI_V7
> + bool "Support for NPCM750 BMC CPU (Poleg)"
> + select CACHE_L2X0
> + select CPU_V7
> + select ARM_GIC
> + select HAVE_SMP
> + select SMP
> + select SMP_ON_UP
> + select HAVE_ARM_SCU
> + select HAVE_ARM_TWD if SMP
> + select ARM_ERRATA_458693
> + select ARM_ERRATA_720789
> + select ARM_ERRATA_742231
> + select ARM_ERRATA_754322
> + select ARM_ERRATA_764369
> + select ARM_ERRATA_794072
> + select PL310_ERRATA_588369
> + select PL310_ERRATA_727915
> + select USB_EHCI_ROOT_HUB_TT
> + select USB_ARCH_HAS_HCD
> + select USB_ARCH_HAS_EHCI
> + select USB_EHCI_HCD
> + select USB_ARCH_HAS_OHCI
> + select USB_OHCI_HCD
> + select USB
> + select FIQ
> + select CPU_USE_DOMAINS
> + select GENERIC_CLOCKEVENTS
> + select CLKDEV_LOOKUP
> + select COMMON_CLK if OF
> + select NPCM750_TIMER
> + select MFD_SYSCON
> + help
> + Support for NPCM750 BMC CPU (Poleg).
> +
> + Nuvoton NPCM750 BMC based on the Cortex A9.
> +
> +endif
> diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
> new file mode 100644
> index 000000000000..78416055b854
> --- /dev/null
> +++ b/arch/arm/mach-npcm/Makefile
> @@ -0,0 +1,3 @@
> +AFLAGS_headsmp.o += -march=armv7-a
> +
> +obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o
> diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
> new file mode 100644
> index 000000000000..9fccbbd49ed4
> --- /dev/null
> +++ b/arch/arm/mach-npcm/headsmp.S
> @@ -0,0 +1,17 @@
> +/*
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/linkage.h>
> +#include <linux/init.h>
> +#include <asm/assembler.h>
> +
> +ENTRY(npcm7xx_secondary_startup)
> + safe_svcmode_maskall r0

I saw you answered to Florian Fainelli that the BootRom is not
starting the secondary CPU in SVC mode. Are you sure? In our
engineering npcm7xx revision, Z1, the BootRom indeed started to run it
in IRQ mode but we fixed it in the production version, A1, (quite long
time ago), I hope you didn't get an EB with Z1 you can check that in
BootBlock console print:
> ADC CLK is set to 25000000
>Last reset was CORST
>vgaioen=1 and mux gspi.
>A1 <<====== this is what you should see, if you see Z1 we need to replace your EB

> +
> + b secondary_startup
> +ENDPROC(npcm7xx_secondary_startup)
> diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
> new file mode 100644
> index 000000000000..132e9d587857
> --- /dev/null
> +++ b/arch/arm/mach-npcm/npcm7xx.c
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (c) 2017 Nuvoton Technology corporation.
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/map.h>
> +#include <asm/hardware/cache-l2x0.h>
> +
> +#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \
> + L310_AUX_CTRL_DATA_PREFETCH | \
> + L310_AUX_CTRL_NS_LOCKDOWN | \
> + L310_AUX_CTRL_CACHE_REPLACE_RR | \
> + L2C_AUX_CTRL_SHARED_OVERRIDE | \
> + L310_AUX_CTRL_FULL_LINE_ZERO)
> +
> +static const char *const npcm7xx_dt_match[] = {
> + "nuvoton,npcm750",
> + NULL
> +};
> +
> +DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
> + .atag_offset = 0x100,
> + .dt_compat = npcm7xx_dt_match,
> + .l2c_aux_val = NPCM7XX_AUX_VAL,
> + .l2c_aux_mask = ~NPCM7XX_AUX_VAL,
> +MACHINE_END
> diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
> new file mode 100644
> index 000000000000..144e3e7ec7e6
> --- /dev/null
> +++ b/arch/arm/mach-npcm/platsmp.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) "PLATSMP: " fmt
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/smp.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <asm/cacheflush.h>
> +#include <asm/smp.h>
> +#include <asm/smp_plat.h>
> +#include <asm/smp_scu.h>
> +
> +#define NPCM7XX_SCRPAD_REG 0x13c
> +
> +extern void npcm7xx_secondary_startup(void);
> +
> +static int npcm7xx_smp_boot_secondary(unsigned int cpu,
> + struct task_struct *idle)
> +{
> + struct device_node *gcr_np;
> + void __iomem *gcr_base;
> + int ret = 0;
> +
> + gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
> + if (!gcr_np) {
> + pr_err("no gcr device node\n");
> + ret = -EFAULT;
> + goto out;
> + }
> + gcr_base = of_iomap(gcr_np, 0);
> + if (!gcr_base) {
> + pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
> + ret = -EFAULT;
> + goto out;
> + }
> +
> + /* give boot ROM kernel start address. */
> + iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
> + NPCM7XX_SCRPAD_REG);
> + /* make sure npcm7xx_secondary_startup is seen by all observers. */
> + smp_wmb();
> + dsb_sev();
> + /* make sure write buffer is drained */
> + mb();
> +
> +out:
> + iounmap(gcr_base);
> + return ret;
> +}
> +
> +static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
> +{
> + struct device_node *scu_np;
> + void __iomem *scu_base;
> +
> + scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
> + if (!scu_np) {
> + pr_err("no scu device node\n");
> + return;
> + }
> + scu_base = of_iomap(scu_np, 0);
> + if (!scu_base) {
> + pr_err("could not iomap scu at: 0x%llx\n", scu_base);
> + return;
> + }
> +
> + scu_enable(scu_base);
> +
> +out:
> + iounmap(scu_base);
> +}
> +
> +static struct smp_operations npcm7xx_smp_ops __initdata = {
> + .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
> + .smp_boot_secondary = npcm7xx_smp_boot_secondary,
> +};
> +
> +CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops);
> --
> 2.14.1.581.gf28d330327-goog
>

2017-09-07 05:09:09

by Brendan Higgins

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] arm: npcm: add basic support for Nuvoton BMCs

On Wed, Sep 6, 2017 at 2:04 PM, Avi Fishman <[email protected]> wrote:
> Sorry for sending again some mailing list rejected it due to HTML
> involved (althoug I tried Plain Text), Trying again.
>
> 2017-09-06 11:07 GMT+03:00 Brendan Higgins <[email protected]>:
>> Adds basic support for the Nuvoton NPCM750 BMC.
>>
>> Signed-off-by: Brendan Higgins <[email protected]>
>> ---
>> arch/arm/Kconfig | 2 +
>> arch/arm/Makefile | 1 +
>> arch/arm/mach-npcm/Kconfig | 50 +++++++++++++++++++++++++
>> arch/arm/mach-npcm/Makefile | 3 ++
>> arch/arm/mach-npcm/headsmp.S | 17 +++++++++
>> arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++
>> arch/arm/mach-npcm/platsmp.c | 89 ++++++++++++++++++++++++++++++++++++++++++++
>> 7 files changed, 196 insertions(+)
>> create mode 100644 arch/arm/mach-npcm/Kconfig
>> create mode 100644 arch/arm/mach-npcm/Makefile
>> create mode 100644 arch/arm/mach-npcm/headsmp.S
>> create mode 100644 arch/arm/mach-npcm/npcm7xx.c
>> create mode 100644 arch/arm/mach-npcm/platsmp.c
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index 61a0cb15067e..05543f1cfbde 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
>>
>> source "arch/arm/mach-nomadik/Kconfig"
>>
>> +source "arch/arm/mach-npcm/Kconfig"
>> +
>> source "arch/arm/mach-nspire/Kconfig"
>>
>> source "arch/arm/plat-omap/Kconfig"
>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>> index 47d3a1ab08d2..60ca50c7d762 100644
>> --- a/arch/arm/Makefile
>> +++ b/arch/arm/Makefile
>> @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
>> machine-$(CONFIG_ARCH_MXS) += mxs
>> machine-$(CONFIG_ARCH_NETX) += netx
>> machine-$(CONFIG_ARCH_NOMADIK) += nomadik
>> +machine-$(CONFIG_ARCH_NPCM) += npcm
>> machine-$(CONFIG_ARCH_NSPIRE) += nspire
>> machine-$(CONFIG_ARCH_OXNAS) += oxnas
>> machine-$(CONFIG_ARCH_OMAP1) += omap1
>> diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
>> new file mode 100644
>> index 000000000000..d47061855439
>> --- /dev/null
>> +++ b/arch/arm/mach-npcm/Kconfig
>> @@ -0,0 +1,50 @@
>> +menuconfig ARCH_NPCM
>> + bool "Nuvoton NPCM Architecture"
>> + select ARCH_REQUIRE_GPIOLIB
>> + select USE_OF
>> + select PINCTRL
>> + select PINCTRL_NPCM7XX
>> +
>> +if ARCH_NPCM
>> +
>> +comment "NPCMX50 CPU type"
>> +
>> +config CPU_NPCM750
>> + depends on ARCH_NPCM && ARCH_MULTI_V7
>> + bool "Support for NPCM750 BMC CPU (Poleg)"
>> + select CACHE_L2X0
>> + select CPU_V7
>> + select ARM_GIC
>> + select HAVE_SMP
>> + select SMP
>> + select SMP_ON_UP
>> + select HAVE_ARM_SCU
>> + select HAVE_ARM_TWD if SMP
>> + select ARM_ERRATA_458693
>> + select ARM_ERRATA_720789
>> + select ARM_ERRATA_742231
>> + select ARM_ERRATA_754322
>> + select ARM_ERRATA_764369
>> + select ARM_ERRATA_794072
>> + select PL310_ERRATA_588369
>> + select PL310_ERRATA_727915
>> + select USB_EHCI_ROOT_HUB_TT
>> + select USB_ARCH_HAS_HCD
>> + select USB_ARCH_HAS_EHCI
>> + select USB_EHCI_HCD
>> + select USB_ARCH_HAS_OHCI
>> + select USB_OHCI_HCD
>> + select USB
>> + select FIQ
>> + select CPU_USE_DOMAINS
>> + select GENERIC_CLOCKEVENTS
>> + select CLKDEV_LOOKUP
>> + select COMMON_CLK if OF
>> + select NPCM750_TIMER
>> + select MFD_SYSCON
>> + help
>> + Support for NPCM750 BMC CPU (Poleg).
>> +
>> + Nuvoton NPCM750 BMC based on the Cortex A9.
>> +
>> +endif
>> diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
>> new file mode 100644
>> index 000000000000..78416055b854
>> --- /dev/null
>> +++ b/arch/arm/mach-npcm/Makefile
>> @@ -0,0 +1,3 @@
>> +AFLAGS_headsmp.o += -march=armv7-a
>> +
>> +obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o
>> diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
>> new file mode 100644
>> index 000000000000..9fccbbd49ed4
>> --- /dev/null
>> +++ b/arch/arm/mach-npcm/headsmp.S
>> @@ -0,0 +1,17 @@
>> +/*
>> + * Copyright 2017 Google, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/linkage.h>
>> +#include <linux/init.h>
>> +#include <asm/assembler.h>
>> +
>> +ENTRY(npcm7xx_secondary_startup)
>> + safe_svcmode_maskall r0
>
> I saw you answered to Florian Fainelli that the BootRom is not
> starting the secondary CPU in SVC mode. Are you sure? In our
> engineering npcm7xx revision, Z1, the BootRom indeed started to run it
> in IRQ mode but we fixed it in the production version, A1, (quite long
> time ago), I hope you didn't get an EB with Z1 you can check that in
> BootBlock console print:
>> ADC CLK is set to 25000000
>>Last reset was CORST
>>vgaioen=1 and mux gspi.
>>A1 <<====== this is what you should see, if you see Z1 we need to replace your EB
>

Nope, on boot it prints:

>EB
>Board manufacturer: Nuvoton

> CPU CLK is 800000000
> MC CLK is 800000000

> ADC CLK is set to 25000000
>Last reset was PORST
>vgaioen=1 and mux gspi.
>A1
>Skip PCI config.

To reproduce, all you have to do is delete

>> + safe_svcmode_maskall r0

and the kernel will warn that the core is not starting in SVC mode

>> +
>> + b secondary_startup
>> +ENDPROC(npcm7xx_secondary_startup)
>> diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
>> new file mode 100644
>> index 000000000000..132e9d587857
>> --- /dev/null
>> +++ b/arch/arm/mach-npcm/npcm7xx.c
>> @@ -0,0 +1,34 @@
>> +/*
>> + * Copyright (c) 2017 Nuvoton Technology corporation.
>> + * Copyright 2017 Google, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/types.h>
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach-types.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/hardware/cache-l2x0.h>
>> +
>> +#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \
>> + L310_AUX_CTRL_DATA_PREFETCH | \
>> + L310_AUX_CTRL_NS_LOCKDOWN | \
>> + L310_AUX_CTRL_CACHE_REPLACE_RR | \
>> + L2C_AUX_CTRL_SHARED_OVERRIDE | \
>> + L310_AUX_CTRL_FULL_LINE_ZERO)
>> +
>> +static const char *const npcm7xx_dt_match[] = {
>> + "nuvoton,npcm750",
>> + NULL
>> +};
>> +
>> +DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
>> + .atag_offset = 0x100,
>> + .dt_compat = npcm7xx_dt_match,
>> + .l2c_aux_val = NPCM7XX_AUX_VAL,
>> + .l2c_aux_mask = ~NPCM7XX_AUX_VAL,
>> +MACHINE_END
>> diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
>> new file mode 100644
>> index 000000000000..144e3e7ec7e6
>> --- /dev/null
>> +++ b/arch/arm/mach-npcm/platsmp.c
>> @@ -0,0 +1,89 @@
>> +/*
>> + * Copyright 2017 Google, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#define pr_fmt(fmt) "PLATSMP: " fmt
>> +
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/smp.h>
>> +#include <linux/io.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> +#include <asm/cacheflush.h>
>> +#include <asm/smp.h>
>> +#include <asm/smp_plat.h>
>> +#include <asm/smp_scu.h>
>> +
>> +#define NPCM7XX_SCRPAD_REG 0x13c
>> +
>> +extern void npcm7xx_secondary_startup(void);
>> +
>> +static int npcm7xx_smp_boot_secondary(unsigned int cpu,
>> + struct task_struct *idle)
>> +{
>> + struct device_node *gcr_np;
>> + void __iomem *gcr_base;
>> + int ret = 0;
>> +
>> + gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
>> + if (!gcr_np) {
>> + pr_err("no gcr device node\n");
>> + ret = -EFAULT;
>> + goto out;
>> + }
>> + gcr_base = of_iomap(gcr_np, 0);
>> + if (!gcr_base) {
>> + pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
>> + ret = -EFAULT;
>> + goto out;
>> + }
>> +
>> + /* give boot ROM kernel start address. */
>> + iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
>> + NPCM7XX_SCRPAD_REG);
>> + /* make sure npcm7xx_secondary_startup is seen by all observers. */
>> + smp_wmb();
>> + dsb_sev();
>> + /* make sure write buffer is drained */
>> + mb();
>> +
>> +out:
>> + iounmap(gcr_base);
>> + return ret;
>> +}
>> +
>> +static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
>> +{
>> + struct device_node *scu_np;
>> + void __iomem *scu_base;
>> +
>> + scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
>> + if (!scu_np) {
>> + pr_err("no scu device node\n");
>> + return;
>> + }
>> + scu_base = of_iomap(scu_np, 0);
>> + if (!scu_base) {
>> + pr_err("could not iomap scu at: 0x%llx\n", scu_base);
>> + return;
>> + }
>> +
>> + scu_enable(scu_base);
>> +
>> +out:
>> + iounmap(scu_base);
>> +}
>> +
>> +static struct smp_operations npcm7xx_smp_ops __initdata = {
>> + .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
>> + .smp_boot_secondary = npcm7xx_smp_boot_secondary,
>> +};
>> +
>> +CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops);
>> --
>> 2.14.1.581.gf28d330327-goog
>>

2017-09-07 06:10:09

by Joel Stanley

[permalink] [raw]
Subject: Re: [PATCH v4 2/3] arm: dts: add Nuvoton NPCM750 device tree

On Wed, 2017-09-06 at 01:07 -0700, Brendan Higgins wrote:
> Add a common device tree for all Nuvoton NPCM750 BMCs and a board
> specific device tree for the NPCM750 (Poleg) evaluation board.
>
> Signed-off-by: Brendan Higgins <[email protected]>
> Reviewed-by: Tomer Maimon <[email protected]>
> Reviewed-by: Avi Fishman <[email protected]>
> Tested-by: Tomer Maimon <[email protected]>
> Tested-by: Avi Fishman <[email protected]>

Reviewed-by: Joel Stanley <[email protected]>


2017-09-07 09:18:50

by Tomer Maimon

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] arm: npcm: add basic support for Nuvoton BMCs

On 6 September 2017 at 11:07, Brendan Higgins <[email protected]> wrote:
> Adds basic support for the Nuvoton NPCM750 BMC.
>
> Signed-off-by: Brendan Higgins <[email protected]>
> ---
> arch/arm/Kconfig | 2 +
> arch/arm/Makefile | 1 +
> arch/arm/mach-npcm/Kconfig | 50 +++++++++++++++++++++++++
> arch/arm/mach-npcm/Makefile | 3 ++
> arch/arm/mach-npcm/headsmp.S | 17 +++++++++
> arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++
> arch/arm/mach-npcm/platsmp.c | 89 ++++++++++++++++++++++++++++++++++++++++++++
> 7 files changed, 196 insertions(+)
> create mode 100644 arch/arm/mach-npcm/Kconfig
> create mode 100644 arch/arm/mach-npcm/Makefile
> create mode 100644 arch/arm/mach-npcm/headsmp.S
> create mode 100644 arch/arm/mach-npcm/npcm7xx.c
> create mode 100644 arch/arm/mach-npcm/platsmp.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 61a0cb15067e..05543f1cfbde 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
>
> source "arch/arm/mach-nomadik/Kconfig"
>
> +source "arch/arm/mach-npcm/Kconfig"
> +
> source "arch/arm/mach-nspire/Kconfig"
>
> source "arch/arm/plat-omap/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 47d3a1ab08d2..60ca50c7d762 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
> machine-$(CONFIG_ARCH_MXS) += mxs
> machine-$(CONFIG_ARCH_NETX) += netx
> machine-$(CONFIG_ARCH_NOMADIK) += nomadik
> +machine-$(CONFIG_ARCH_NPCM) += npcm
> machine-$(CONFIG_ARCH_NSPIRE) += nspire
> machine-$(CONFIG_ARCH_OXNAS) += oxnas
> machine-$(CONFIG_ARCH_OMAP1) += omap1
> diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
> new file mode 100644
> index 000000000000..d47061855439
> --- /dev/null
> +++ b/arch/arm/mach-npcm/Kconfig
> @@ -0,0 +1,50 @@
> +menuconfig ARCH_NPCM
> + bool "Nuvoton NPCM Architecture"
> + select ARCH_REQUIRE_GPIOLIB
> + select USE_OF
> + select PINCTRL
> + select PINCTRL_NPCM7XX
> +
> +if ARCH_NPCM
> +
> +comment "NPCMX50 CPU type"
> +
> +config CPU_NPCM750
> + depends on ARCH_NPCM && ARCH_MULTI_V7
> + bool "Support for NPCM750 BMC CPU (Poleg)"
> + select CACHE_L2X0
> + select CPU_V7
> + select ARM_GIC
> + select HAVE_SMP
> + select SMP
> + select SMP_ON_UP
> + select HAVE_ARM_SCU
> + select HAVE_ARM_TWD if SMP
> + select ARM_ERRATA_458693
> + select ARM_ERRATA_720789
> + select ARM_ERRATA_742231
> + select ARM_ERRATA_754322
> + select ARM_ERRATA_764369
> + select ARM_ERRATA_794072
> + select PL310_ERRATA_588369
> + select PL310_ERRATA_727915
> + select USB_EHCI_ROOT_HUB_TT
> + select USB_ARCH_HAS_HCD
> + select USB_ARCH_HAS_EHCI
> + select USB_EHCI_HCD
> + select USB_ARCH_HAS_OHCI
> + select USB_OHCI_HCD
> + select USB
> + select FIQ
> + select CPU_USE_DOMAINS
> + select GENERIC_CLOCKEVENTS
> + select CLKDEV_LOOKUP
> + select COMMON_CLK if OF
> + select NPCM750_TIMER
> + select MFD_SYSCON
> + help
> + Support for NPCM750 BMC CPU (Poleg).
> +
> + Nuvoton NPCM750 BMC based on the Cortex A9.
> +
> +endif
> diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
> new file mode 100644
> index 000000000000..78416055b854
> --- /dev/null
> +++ b/arch/arm/mach-npcm/Makefile
> @@ -0,0 +1,3 @@
> +AFLAGS_headsmp.o += -march=armv7-a
> +
> +obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o
> diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
> new file mode 100644
> index 000000000000..9fccbbd49ed4
> --- /dev/null
> +++ b/arch/arm/mach-npcm/headsmp.S
> @@ -0,0 +1,17 @@
> +/*
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/linkage.h>
> +#include <linux/init.h>
> +#include <asm/assembler.h>
> +
> +ENTRY(npcm7xx_secondary_startup)
> + safe_svcmode_maskall r0
> +
> + b secondary_startup
> +ENDPROC(npcm7xx_secondary_startup)
> diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
> new file mode 100644
> index 000000000000..132e9d587857
> --- /dev/null
> +++ b/arch/arm/mach-npcm/npcm7xx.c
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (c) 2017 Nuvoton Technology corporation.
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/map.h>
> +#include <asm/hardware/cache-l2x0.h>
> +
> +#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \
> + L310_AUX_CTRL_DATA_PREFETCH | \
> + L310_AUX_CTRL_NS_LOCKDOWN | \
> + L310_AUX_CTRL_CACHE_REPLACE_RR | \
> + L2C_AUX_CTRL_SHARED_OVERRIDE | \
> + L310_AUX_CTRL_FULL_LINE_ZERO)
> +
> +static const char *const npcm7xx_dt_match[] = {
> + "nuvoton,npcm750",
> + NULL
> +};
> +
> +DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
> + .atag_offset = 0x100,
> + .dt_compat = npcm7xx_dt_match,
> + .l2c_aux_val = NPCM7XX_AUX_VAL,
> + .l2c_aux_mask = ~NPCM7XX_AUX_VAL,
> +MACHINE_END
> diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
> new file mode 100644
> index 000000000000..144e3e7ec7e6
> --- /dev/null
> +++ b/arch/arm/mach-npcm/platsmp.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) "PLATSMP: " fmt
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/smp.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <asm/cacheflush.h>
> +#include <asm/smp.h>
> +#include <asm/smp_plat.h>
> +#include <asm/smp_scu.h>
> +
> +#define NPCM7XX_SCRPAD_REG 0x13c
> +
> +extern void npcm7xx_secondary_startup(void);
> +
> +static int npcm7xx_smp_boot_secondary(unsigned int cpu,
> + struct task_struct *idle)
> +{
> + struct device_node *gcr_np;
> + void __iomem *gcr_base;
> + int ret = 0;
> +
> + gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
> + if (!gcr_np) {
> + pr_err("no gcr device node\n");
> + ret = -EFAULT;
> + goto out;
> + }
> + gcr_base = of_iomap(gcr_np, 0);
> + if (!gcr_base) {
> + pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
> + ret = -EFAULT;
> + goto out;
> + }
> +
> + /* give boot ROM kernel start address. */
> + iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
> + NPCM7XX_SCRPAD_REG);
> + /* make sure npcm7xx_secondary_startup is seen by all observers. */
> + smp_wmb();
> + dsb_sev();
> + /* make sure write buffer is drained */
> + mb();
> +
> +out:
> + iounmap(gcr_base);
> + return ret;
> +}
> +
> +static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
> +{
> + struct device_node *scu_np;
> + void __iomem *scu_base;
> +
> + scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
> + if (!scu_np) {
> + pr_err("no scu device node\n");
> + return;
> + }
> + scu_base = of_iomap(scu_np, 0);
> + if (!scu_base) {
> + pr_err("could not iomap scu at: 0x%llx\n", scu_base);
> + return;
> + }
> +
> + scu_enable(scu_base);
> +
> +out:
> + iounmap(scu_base);
> +}
> +
> +static struct smp_operations npcm7xx_smp_ops __initdata = {
> + .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
> + .smp_boot_secondary = npcm7xx_smp_boot_secondary,
> +};
> +
> +CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops);
> --
> 2.14.1.581.gf28d330327-goog
>

Reviewed-by: Tomer Maimon <[email protected]>
Reviewed-by: Avi Fishman <[email protected]>
Tested-by: Tomer Maimon <[email protected]>
Tested-by: Avi Fishman <[email protected]>

2017-09-07 15:09:09

by Avi Fishman

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] arm: npcm: add basic support for Nuvoton BMCs

On Thu, Sep 7, 2017 at 8:09 AM, Brendan Higgins
<[email protected]> wrote:
> On Wed, Sep 6, 2017 at 2:04 PM, Avi Fishman <[email protected]> wrote:
>> Sorry for sending again some mailing list rejected it due to HTML
>> involved (althoug I tried Plain Text), Trying again.
>>
>> 2017-09-06 11:07 GMT+03:00 Brendan Higgins <[email protected]>:
>>> Adds basic support for the Nuvoton NPCM750 BMC.
>>>
>>> Signed-off-by: Brendan Higgins <[email protected]>
>>> ---
>>> arch/arm/Kconfig | 2 +
>>> arch/arm/Makefile | 1 +
>>> arch/arm/mach-npcm/Kconfig | 50 +++++++++++++++++++++++++
>>> arch/arm/mach-npcm/Makefile | 3 ++
>>> arch/arm/mach-npcm/headsmp.S | 17 +++++++++
>>> arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++
>>> arch/arm/mach-npcm/platsmp.c | 89 ++++++++++++++++++++++++++++++++++++++++++++
>>> 7 files changed, 196 insertions(+)
>>> create mode 100644 arch/arm/mach-npcm/Kconfig
>>> create mode 100644 arch/arm/mach-npcm/Makefile
>>> create mode 100644 arch/arm/mach-npcm/headsmp.S
>>> create mode 100644 arch/arm/mach-npcm/npcm7xx.c
>>> create mode 100644 arch/arm/mach-npcm/platsmp.c
>>>
>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>>> index 61a0cb15067e..05543f1cfbde 100644
>>> --- a/arch/arm/Kconfig
>>> +++ b/arch/arm/Kconfig
>>> @@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
>>>
>>> source "arch/arm/mach-nomadik/Kconfig"
>>>
>>> +source "arch/arm/mach-npcm/Kconfig"
>>> +
>>> source "arch/arm/mach-nspire/Kconfig"
>>>
>>> source "arch/arm/plat-omap/Kconfig"
>>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>>> index 47d3a1ab08d2..60ca50c7d762 100644
>>> --- a/arch/arm/Makefile
>>> +++ b/arch/arm/Makefile
>>> @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
>>> machine-$(CONFIG_ARCH_MXS) += mxs
>>> machine-$(CONFIG_ARCH_NETX) += netx
>>> machine-$(CONFIG_ARCH_NOMADIK) += nomadik
>>> +machine-$(CONFIG_ARCH_NPCM) += npcm
>>> machine-$(CONFIG_ARCH_NSPIRE) += nspire
>>> machine-$(CONFIG_ARCH_OXNAS) += oxnas
>>> machine-$(CONFIG_ARCH_OMAP1) += omap1
>>> diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
>>> new file mode 100644
>>> index 000000000000..d47061855439
>>> --- /dev/null
>>> +++ b/arch/arm/mach-npcm/Kconfig
>>> @@ -0,0 +1,50 @@
>>> +menuconfig ARCH_NPCM
>>> + bool "Nuvoton NPCM Architecture"
>>> + select ARCH_REQUIRE_GPIOLIB
>>> + select USE_OF
>>> + select PINCTRL
>>> + select PINCTRL_NPCM7XX
>>> +
>>> +if ARCH_NPCM
>>> +
>>> +comment "NPCMX50 CPU type"
>>> +
>>> +config CPU_NPCM750
>>> + depends on ARCH_NPCM && ARCH_MULTI_V7
>>> + bool "Support for NPCM750 BMC CPU (Poleg)"
>>> + select CACHE_L2X0
>>> + select CPU_V7
>>> + select ARM_GIC
>>> + select HAVE_SMP
>>> + select SMP
>>> + select SMP_ON_UP
>>> + select HAVE_ARM_SCU
>>> + select HAVE_ARM_TWD if SMP
>>> + select ARM_ERRATA_458693
>>> + select ARM_ERRATA_720789
>>> + select ARM_ERRATA_742231
>>> + select ARM_ERRATA_754322
>>> + select ARM_ERRATA_764369
>>> + select ARM_ERRATA_794072
>>> + select PL310_ERRATA_588369
>>> + select PL310_ERRATA_727915
>>> + select USB_EHCI_ROOT_HUB_TT
>>> + select USB_ARCH_HAS_HCD
>>> + select USB_ARCH_HAS_EHCI
>>> + select USB_EHCI_HCD
>>> + select USB_ARCH_HAS_OHCI
>>> + select USB_OHCI_HCD
>>> + select USB
>>> + select FIQ
>>> + select CPU_USE_DOMAINS
>>> + select GENERIC_CLOCKEVENTS
>>> + select CLKDEV_LOOKUP
>>> + select COMMON_CLK if OF
>>> + select NPCM750_TIMER
>>> + select MFD_SYSCON
>>> + help
>>> + Support for NPCM750 BMC CPU (Poleg).
>>> +
>>> + Nuvoton NPCM750 BMC based on the Cortex A9.
>>> +
>>> +endif
>>> diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
>>> new file mode 100644
>>> index 000000000000..78416055b854
>>> --- /dev/null
>>> +++ b/arch/arm/mach-npcm/Makefile
>>> @@ -0,0 +1,3 @@
>>> +AFLAGS_headsmp.o += -march=armv7-a
>>> +
>>> +obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o
>>> diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
>>> new file mode 100644
>>> index 000000000000..9fccbbd49ed4
>>> --- /dev/null
>>> +++ b/arch/arm/mach-npcm/headsmp.S
>>> @@ -0,0 +1,17 @@
>>> +/*
>>> + * Copyright 2017 Google, Inc.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + */
>>> +
>>> +#include <linux/linkage.h>
>>> +#include <linux/init.h>
>>> +#include <asm/assembler.h>
>>> +
>>> +ENTRY(npcm7xx_secondary_startup)
>>> + safe_svcmode_maskall r0
>>
>> I saw you answered to Florian Fainelli that the BootRom is not
>> starting the secondary CPU in SVC mode. Are you sure? In our
>> engineering npcm7xx revision, Z1, the BootRom indeed started to run it
>> in IRQ mode but we fixed it in the production version, A1, (quite long
>> time ago), I hope you didn't get an EB with Z1 you can check that in
>> BootBlock console print:
>>> ADC CLK is set to 25000000
>>>Last reset was CORST
>>>vgaioen=1 and mux gspi.
>>>A1 <<====== this is what you should see, if you see Z1 we need to replace your EB
>>
>
> Nope, on boot it prints:
>
>>EB
>>Board manufacturer: Nuvoton
>
>> CPU CLK is 800000000
>> MC CLK is 800000000
>
>> ADC CLK is set to 25000000
>>Last reset was PORST
>>vgaioen=1 and mux gspi.
>>A1
>>Skip PCI config.
>
> To reproduce, all you have to do is delete
>
>>> + safe_svcmode_maskall r0
>
> and the kernel will warn that the core is not starting in SVC mode
>

OK, Tomer also confirmed it, his kernel printed this:
CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary
CPU mode 0x13)
CPU: This may indicate a broken bootloader or firmware.
It appears that in kernel CPU0 starts at SVC mode (0x13) and CPU1
starts at SYS mode (0x1F) and the kernel doesn't like that, so leave
it as is.

>>> +
>>> + b secondary_startup
>>> +ENDPROC(npcm7xx_secondary_startup)
>>> diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
>>> new file mode 100644
>>> index 000000000000..132e9d587857
>>> --- /dev/null
>>> +++ b/arch/arm/mach-npcm/npcm7xx.c
>>> @@ -0,0 +1,34 @@
>>> +/*
>>> + * Copyright (c) 2017 Nuvoton Technology corporation.
>>> + * Copyright 2017 Google, Inc.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + */
>>> +
>>> +#include <linux/kernel.h>
>>> +#include <linux/types.h>
>>> +#include <asm/mach/arch.h>
>>> +#include <asm/mach-types.h>
>>> +#include <asm/mach/map.h>
>>> +#include <asm/hardware/cache-l2x0.h>
>>> +
>>> +#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \
>>> + L310_AUX_CTRL_DATA_PREFETCH | \
>>> + L310_AUX_CTRL_NS_LOCKDOWN | \
>>> + L310_AUX_CTRL_CACHE_REPLACE_RR | \
>>> + L2C_AUX_CTRL_SHARED_OVERRIDE | \
>>> + L310_AUX_CTRL_FULL_LINE_ZERO)
>>> +
>>> +static const char *const npcm7xx_dt_match[] = {
>>> + "nuvoton,npcm750",
>>> + NULL
>>> +};
>>> +
>>> +DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
>>> + .atag_offset = 0x100,
>>> + .dt_compat = npcm7xx_dt_match,
>>> + .l2c_aux_val = NPCM7XX_AUX_VAL,
>>> + .l2c_aux_mask = ~NPCM7XX_AUX_VAL,
>>> +MACHINE_END
>>> diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
>>> new file mode 100644
>>> index 000000000000..144e3e7ec7e6
>>> --- /dev/null
>>> +++ b/arch/arm/mach-npcm/platsmp.c
>>> @@ -0,0 +1,89 @@
>>> +/*
>>> + * Copyright 2017 Google, Inc.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + */
>>> +
>>> +#define pr_fmt(fmt) "PLATSMP: " fmt
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/device.h>
>>> +#include <linux/smp.h>
>>> +#include <linux/io.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/of_platform.h>
>>> +#include <linux/of_address.h>
>>> +#include <asm/cacheflush.h>
>>> +#include <asm/smp.h>
>>> +#include <asm/smp_plat.h>
>>> +#include <asm/smp_scu.h>
>>> +
>>> +#define NPCM7XX_SCRPAD_REG 0x13c
>>> +
>>> +extern void npcm7xx_secondary_startup(void);
>>> +
>>> +static int npcm7xx_smp_boot_secondary(unsigned int cpu,
>>> + struct task_struct *idle)
>>> +{
>>> + struct device_node *gcr_np;
>>> + void __iomem *gcr_base;
>>> + int ret = 0;
>>> +
>>> + gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
>>> + if (!gcr_np) {
>>> + pr_err("no gcr device node\n");
>>> + ret = -EFAULT;
>>> + goto out;
>>> + }
>>> + gcr_base = of_iomap(gcr_np, 0);
>>> + if (!gcr_base) {
>>> + pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
>>> + ret = -EFAULT;
>>> + goto out;
>>> + }
>>> +
>>> + /* give boot ROM kernel start address. */
>>> + iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
>>> + NPCM7XX_SCRPAD_REG);
>>> + /* make sure npcm7xx_secondary_startup is seen by all observers. */
>>> + smp_wmb();
>>> + dsb_sev();
>>> + /* make sure write buffer is drained */
>>> + mb();
>>> +
>>> +out:
>>> + iounmap(gcr_base);
>>> + return ret;
>>> +}
>>> +
>>> +static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
>>> +{
>>> + struct device_node *scu_np;
>>> + void __iomem *scu_base;
>>> +
>>> + scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
>>> + if (!scu_np) {
>>> + pr_err("no scu device node\n");
>>> + return;
>>> + }
>>> + scu_base = of_iomap(scu_np, 0);
>>> + if (!scu_base) {
>>> + pr_err("could not iomap scu at: 0x%llx\n", scu_base);
>>> + return;
>>> + }
>>> +
>>> + scu_enable(scu_base);
>>> +
>>> +out:
>>> + iounmap(scu_base);
>>> +}
>>> +
>>> +static struct smp_operations npcm7xx_smp_ops __initdata = {
>>> + .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
>>> + .smp_boot_secondary = npcm7xx_smp_boot_secondary,
>>> +};
>>> +
>>> +CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops);
>>> --
>>> 2.14.1.581.gf28d330327-goog
>>>