From: jun qian <[email protected]>
When get the pending softirqs, it need to process all the pending
softirqs in the while loop. If the processing time of each pending
softirq is need more than 2 msec in this loop, or one of the softirq
will running a long time, according to the original code logic, it
will process all the pending softirqs without wakeuping ksoftirqd,
which will cause a relatively large scheduling delay on the
corresponding CPU, which we do not wish to see. The patch will check
the total time to process pending softirq, if the time exceeds 2 ms
we need to wakeup the ksofirqd to aviod large sched delay.
Signed-off-by: jun qian <[email protected]>
---
kernel/softirq.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/softirq.c b/kernel/softirq.c
index c4201b7f..602d9fa 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -299,6 +299,9 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
}
h++;
pending >>= softirq_bit;
+
+ if (time_after(jiffies, end) && need_resched())
+ break;
}
if (__this_cpu_read(ksoftirqd) == current)
--
1.8.3.1
> From: jun qian <[email protected]>
>
> When get the pending softirqs, it need to process all the pending
> softirqs in the while loop. If the processing time of each pending
> softirq is need more than 2 msec in this loop, or one of the softirq
> will running a long time, according to the original code logic, it
> will process all the pending softirqs without wakeuping ksoftirqd,
> which will cause a relatively large scheduling delay on the
> corresponding CPU, which we do not wish to see. The patch will check
> the total time to process pending softirq, if the time exceeds 2 ms
> we need to wakeup the ksofirqd to aviod large sched delay.
>
> Signed-off-by: jun qian <[email protected]>
> ---
> kernel/softirq.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/kernel/softirq.c b/kernel/softirq.c
> index c4201b7f..602d9fa 100644
> --- a/kernel/softirq.c
> +++ b/kernel/softirq.c
> @@ -299,6 +299,9 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
> }
> h++;
> pending >>= softirq_bit;
> +
> + if (time_after(jiffies, end) && need_resched())
> + break;
> }
>
> if (__this_cpu_read(ksoftirqd) == current)
>
I have a small concern about MAX_SOFTIRQ_TIME. The problem is that
an "end" time is based on jiffies/tick update, so it depends on CONFIG_HZ
value of your kernel.
For example if we have CONFIG_HZ=100, msecs_to_jiffies(2) will return 1.
For HZ=100 one jiffie is 10 milliseconds. So we can not rely on it,
because of low resolution.
Maybe it make sense to fix it first in order to be at least aligned with
"2 milliseconds time limit" documentation?
<snip>
* We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
* but break the loop if need_resched() is set or after 2 ms.
<snip>
ktime_get()/ktime_before()...?
--
Vlad Rezki
On Sat, Jul 18, 2020 at 6:07 AM Uladzislau Rezki <[email protected]> wrote:
>
> > From: jun qian <[email protected]>
> >
> > When get the pending softirqs, it need to process all the pending
> > softirqs in the while loop. If the processing time of each pending
> > softirq is need more than 2 msec in this loop, or one of the softirq
> > will running a long time, according to the original code logic, it
> > will process all the pending softirqs without wakeuping ksoftirqd,
> > which will cause a relatively large scheduling delay on the
> > corresponding CPU, which we do not wish to see. The patch will check
> > the total time to process pending softirq, if the time exceeds 2 ms
> > we need to wakeup the ksofirqd to aviod large sched delay.
> >
> > Signed-off-by: jun qian <[email protected]>
> > ---
> > kernel/softirq.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/kernel/softirq.c b/kernel/softirq.c
> > index c4201b7f..602d9fa 100644
> > --- a/kernel/softirq.c
> > +++ b/kernel/softirq.c
> > @@ -299,6 +299,9 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
> > }
> > h++;
> > pending >>= softirq_bit;
> > +
> > + if (time_after(jiffies, end) && need_resched())
> > + break;
> > }
> >
> > if (__this_cpu_read(ksoftirqd) == current)
> >
> I have a small concern about MAX_SOFTIRQ_TIME. The problem is that
> an "end" time is based on jiffies/tick update, so it depends on CONFIG_HZ
> value of your kernel.
>
> For example if we have CONFIG_HZ=100, msecs_to_jiffies(2) will return 1.
> For HZ=100 one jiffie is 10 milliseconds. So we can not rely on it,
> because of low resolution.
>
good tip. Does this problem also exist in the current code, just like this:
if (pending) {
if (time_before(jiffies, end) && !need_resched() &&
/* low resolution problem */
--max_restart)
goto restart;
wakeup_softirqd();
}
> Maybe it make sense to fix it first in order to be at least aligned with
> "2 milliseconds time limit" documentation?
>
> <snip>
> * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
> * but break the loop if need_resched() is set or after 2 ms.
> <snip>
>
I can't find the snip from the linux/Documentation/, could you please
tell me where I can find this snip, thks
> ktime_get()/ktime_before()...?
>
if the low resolution problem also exists in the above code, i think
also need to fix it with using ktime_get()/ktime_before().
> --
> Vlad Rezki