In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
could possibly allocate a page, DMA memory buffer, for the first
fragment which is not suitable for Xen-swiotlb to do DMA operations.
Xen-swiotlb will internally allocate another page for doing DMA
operations. It requires syncing between those two pages. Otherwise,
we may get an incomplete skb. To fix this problem, sync the first
fragment no matter the first fargment is makred as "page_released"
or not.
Signed-off-by: Firo Yang <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index cbaf712d6529..200de9838096 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1825,13 +1825,7 @@ static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring,
static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
struct sk_buff *skb)
{
- /* if the page was released unmap it, else just sync our portion */
- if (unlikely(IXGBE_CB(skb)->page_released)) {
- dma_unmap_page_attrs(rx_ring->dev, IXGBE_CB(skb)->dma,
- ixgbe_rx_pg_size(rx_ring),
- DMA_FROM_DEVICE,
- IXGBE_RX_DMA_ATTR);
- } else if (ring_uses_build_skb(rx_ring)) {
+ if (ring_uses_build_skb(rx_ring)) {
unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
dma_sync_single_range_for_cpu(rx_ring->dev,
@@ -1848,6 +1842,14 @@ static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
skb_frag_size(frag),
DMA_FROM_DEVICE);
}
+
+ /* If the page was released, just unmap it. */
+ if (unlikely(IXGBE_CB(skb)->page_released)) {
+ dma_unmap_page_attrs(rx_ring->dev, IXGBE_CB(skb)->dma,
+ ixgbe_rx_pg_size(rx_ring),
+ DMA_FROM_DEVICE,
+ IXGBE_RX_DMA_ATTR);
+ }
}
/**
--
2.16.4
From: Firo Yang <[email protected]>
Date: Tue, 6 Aug 2019 09:29:51 +0000
> In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
> could possibly allocate a page, DMA memory buffer, for the first
> fragment which is not suitable for Xen-swiotlb to do DMA operations.
> Xen-swiotlb will internally allocate another page for doing DMA
> operations. It requires syncing between those two pages. Otherwise,
> we may get an incomplete skb. To fix this problem, sync the first
> fragment no matter the first fargment is makred as "page_released"
> or not.
>
> Signed-off-by: Firo Yang <[email protected]>
I don't understand, an unmap operation implies a sync operation.
On Tue, Aug 6, 2019 at 11:36 AM David Miller <[email protected]> wrote:
>
> From: Firo Yang <[email protected]>
> Date: Tue, 6 Aug 2019 09:29:51 +0000
>
> > In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
> > could possibly allocate a page, DMA memory buffer, for the first
> > fragment which is not suitable for Xen-swiotlb to do DMA operations.
> > Xen-swiotlb will internally allocate another page for doing DMA
> > operations. It requires syncing between those two pages. Otherwise,
> > we may get an incomplete skb. To fix this problem, sync the first
> > fragment no matter the first fargment is makred as "page_released"
> > or not.
> >
> > Signed-off-by: Firo Yang <[email protected]>
>
> I don't understand, an unmap operation implies a sync operation.
Actually it doesn't because ixgbe is mapping and unmapping with
DMA_ATTR_SKIP_CPU_SYNC.
The patch description isn't very good. The issue is that the sync in
this case is being skipped in ixgbe_get_rx_buffer for a frame where
the buffer spans more then a single page. As such we need to do both
the sync and the unmap call on the last frame when we encounter the
End Of Packet.
On Tue, Aug 6, 2019 at 2:38 AM Firo Yang <[email protected]> wrote:
>
> In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
> could possibly allocate a page, DMA memory buffer, for the first
> fragment which is not suitable for Xen-swiotlb to do DMA operations.
> Xen-swiotlb will internally allocate another page for doing DMA
> operations. It requires syncing between those two pages. Otherwise,
> we may get an incomplete skb. To fix this problem, sync the first
> fragment no matter the first fargment is makred as "page_released"
> or not.
>
> Signed-off-by: Firo Yang <[email protected]>
From what I can tell the code below is fine. However the patch
description isn't very clear about the issue.
Specifically since we are mapping the frame with
DMA_ATTR_SKIP_CPU_SYNC we have to unmap with that as well. As a result
a sync is not performed on an unmap and must be done manually as we
skipped it for the first frag. As such we need to always sync before
possibly performing a page unmap operation.
Also you can probably add the following to your patch description"
Fixes: f3213d932173 ("ixgbe: Update driver to make use of DMA
attributes in Rx path")
Reviewed-by: Alexander Duyck <[email protected]>
> ---
> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 16 +++++++++-------
> 1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> index cbaf712d6529..200de9838096 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> @@ -1825,13 +1825,7 @@ static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring,
> static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
> struct sk_buff *skb)
> {
> - /* if the page was released unmap it, else just sync our portion */
> - if (unlikely(IXGBE_CB(skb)->page_released)) {
> - dma_unmap_page_attrs(rx_ring->dev, IXGBE_CB(skb)->dma,
> - ixgbe_rx_pg_size(rx_ring),
> - DMA_FROM_DEVICE,
> - IXGBE_RX_DMA_ATTR);
> - } else if (ring_uses_build_skb(rx_ring)) {
> + if (ring_uses_build_skb(rx_ring)) {
> unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
>
> dma_sync_single_range_for_cpu(rx_ring->dev,
> @@ -1848,6 +1842,14 @@ static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
> skb_frag_size(frag),
> DMA_FROM_DEVICE);
> }
> +
> + /* If the page was released, just unmap it. */
> + if (unlikely(IXGBE_CB(skb)->page_released)) {
> + dma_unmap_page_attrs(rx_ring->dev, IXGBE_CB(skb)->dma,
> + ixgbe_rx_pg_size(rx_ring),
> + DMA_FROM_DEVICE,
> + IXGBE_RX_DMA_ATTR);
> + }
> }
>
> /**
> --
> 2.16.4
>