2016-11-11 23:34:41

by Shuah Khan

[permalink] [raw]
Subject: BUG: KASAN: use-after-free in snd_usb_audio_free

Hi Takashi,

I am seeing the following use-after-free error when I disconnect an
USB speaker. I saw this on 4.9-rc4 and 4.8.7. There might be race
condition between the disconnect and pcm close perhaps.

-- Shuah


[ 1099.305137] ==================================================================
[ 1099.305172] BUG: KASAN: use-after-free in
snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr
ffff8801c863ce10
[ 1099.305180] Write of size 8 by task pulseaudio/2244
[ 1099.305189] CPU: 0 PID: 2244 Comm: pulseaudio Not tainted 4.8.7 #8
[ 1099.305192] Hardware name: Hewlett-Packard HP ProBook 6475b/180F,
BIOS 68TTU Ver. F.04 08/03/2012
[ 1099.305196] ffff8801c863d480 ffff8801ca6bfae8 ffffffff81b31473
ffff8801fa403040
[ 1099.305207] ffff8801c863cc80 ffff8801ca6bfb10 ffffffff81564ef1
ffff8801ca6bfba0
[ 1099.305217] ffff8801c863cc80 ffff8801fa403040 ffff8801ca6bfb90
ffffffff8156518a
[ 1099.305227] Call Trace:
[ 1099.305236] [<ffffffff81b31473>] dump_stack+0x67/0x94
[ 1099.305244] [<ffffffff81564ef1>] kasan_object_err+0x21/0x70
[ 1099.305250] [<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0
[ 1099.305256] [<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0
[ 1099.305262] [<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50
[ 1099.305280] [<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160
[snd_usb_audio]
[ 1099.305297] [<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160
[snd_usb_audio]
[ 1099.305316] [<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40
[snd_usb_audio]
[ 1099.305324] [<ffffffff8243c78a>] __snd_device_free+0x12a/0x210
[ 1099.305329] [<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0
[ 1099.305335] [<ffffffff8242cae4>] release_card_device+0x34/0x130
[ 1099.305342] [<ffffffff81ef1846>] device_release+0x76/0x1e0
[ 1099.305348] [<ffffffff81b37ad7>] kobject_release+0x107/0x370
[ 1099.305353] [<ffffffff81b376ee>] kobject_put+0x4e/0xa0
[ 1099.305358] [<ffffffff81ef1f77>] put_device+0x17/0x20
[ 1099.305363] [<ffffffff8242dcdd>] snd_card_file_remove+0x2ed/0x3d0
[ 1099.305369] [<ffffffff82431327>] snd_ctl_release+0x277/0x380
[ 1099.305374] [<ffffffff8242d326>] snd_disconnect_release+0x276/0x3a0
[ 1099.305380] [<ffffffff815a421c>] __fput+0x1fc/0x6c0
[ 1099.305385] [<ffffffff815a474e>] ____fput+0xe/0x10
[ 1099.305392] [<ffffffff8117a2ee>] task_work_run+0xde/0x140
[ 1099.305398] [<ffffffff81003a30>] exit_to_usermode_loop+0x140/0x170
[ 1099.305405] [<ffffffff8100661a>] syscall_return_slowpath+0x16a/0x1a0
[ 1099.305411] [<ffffffff828cdef3>] entry_SYSCALL_64_fastpath+0xa6/0xa8
[ 1099.305417] Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048
[ 1099.305422] Allocated:
[ 1099.305427] PID = 1788
[ 1099.305432] [<ffffffff810804eb>] save_stack_trace+0x2b/0x50
[ 1099.305440] [<ffffffff81564296>] save_stack+0x46/0xd0
[ 1099.305446] [<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0
[ 1099.305453] [<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240
[ 1099.305460] [<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90
[ 1099.305467] [<ffffffff8216349d>] hub_event+0xf1d/0x35f0
[ 1099.305473] [<ffffffff8116c66a>] process_one_work+0x68a/0x19f0
[ 1099.305479] [<ffffffff8116daa9>] worker_thread+0xd9/0x12f0
[ 1099.305485] [<ffffffff8117eed4>] kthread+0x1d4/0x270
[ 1099.305490] [<ffffffff828ce07f>] ret_from_fork+0x1f/0x40
[ 1099.305497] Freed:
[ 1099.305502] PID = 1788
[ 1099.305506] [<ffffffff810804eb>] save_stack_trace+0x2b/0x50
[ 1099.305512] [<ffffffff81564296>] save_stack+0x46/0xd0
[ 1099.305519] [<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0
[ 1099.305526] [<ffffffff81560929>] kfree+0xd9/0x280
[ 1099.305531] [<ffffffff8214de6e>] usb_release_dev+0xde/0x110
[ 1099.305537] [<ffffffff81ef1846>] device_release+0x76/0x1e0
[ 1099.305544] [<ffffffff81b37ad7>] kobject_release+0x107/0x370
[ 1099.305550] [<ffffffff81b376ee>] kobject_put+0x4e/0xa0
[ 1099.305555] [<ffffffff81ef1f77>] put_device+0x17/0x20
[ 1099.305562] [<ffffffff8215d248>] usb_disconnect+0x4d8/0x8b0
[ 1099.305568] [<ffffffff821633a0>] hub_event+0xe20/0x35f0
[ 1099.305573] [<ffffffff8116c66a>] process_one_work+0x68a/0x19f0
[ 1099.305579] [<ffffffff8116daa9>] worker_thread+0xd9/0x12f0
[ 1099.305585] [<ffffffff8117eed4>] kthread+0x1d4/0x270
[ 1099.305591] [<ffffffff828ce07f>] ret_from_fork+0x1f/0x40
[ 1099.305597] Memory state around the buggy address:
[ 1099.305605] ffff8801c863cd00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 1099.305612] ffff8801c863cd80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 1099.305618] >ffff8801c863ce00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 1099.305623] ^
[ 1099.305629] ffff8801c863ce80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 1099.305635] ffff8801c863cf00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 1099.305639] ==================================================================
[ 1099.305643] Disabling lock debugging due to kernel taint


2016-11-14 10:25:35

by Takashi Iwai

[permalink] [raw]
Subject: Re: BUG: KASAN: use-after-free in snd_usb_audio_free

On Sat, 12 Nov 2016 00:34:38 +0100,
Shuah Khan wrote:
>
> Hi Takashi,
>
> I am seeing the following use-after-free error when I disconnect an
> USB speaker. I saw this on 4.9-rc4 and 4.8.7. There might be race
> condition between the disconnect and pcm close perhaps.

Thanks, this looks like a new discovery.
Could you check whether the patch below works?


Takashi

---
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 9e5276d6dda0..2ddc034673a8 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -315,7 +315,8 @@ static int snd_usb_audio_free(struct snd_usb_audio *chip)
snd_usb_endpoint_free(ep);

mutex_destroy(&chip->mutex);
- dev_set_drvdata(&chip->dev->dev, NULL);
+ if (!atomic_read(&chip->shutdown))
+ dev_set_drvdata(&chip->dev->dev, NULL);
kfree(chip);
return 0;
}

2016-11-14 16:55:58

by Shuah Khan

[permalink] [raw]
Subject: Re: BUG: KASAN: use-after-free in snd_usb_audio_free

On 11/14/2016 03:25 AM, Takashi Iwai wrote:
> On Sat, 12 Nov 2016 00:34:38 +0100,
> Shuah Khan wrote:
>>
>> Hi Takashi,
>>
>> I am seeing the following use-after-free error when I disconnect an
>> USB speaker. I saw this on 4.9-rc4 and 4.8.7. There might be race
>> condition between the disconnect and pcm close perhaps.
>
> Thanks, this looks like a new discovery.
> Could you check whether the patch below works?
>
>
> Takashi
>
> ---
> diff --git a/sound/usb/card.c b/sound/usb/card.c
> index 9e5276d6dda0..2ddc034673a8 100644
> --- a/sound/usb/card.c
> +++ b/sound/usb/card.c
> @@ -315,7 +315,8 @@ static int snd_usb_audio_free(struct snd_usb_audio *chip)
> snd_usb_endpoint_free(ep);
>
> mutex_destroy(&chip->mutex);
> - dev_set_drvdata(&chip->dev->dev, NULL);
> + if (!atomic_read(&chip->shutdown))
> + dev_set_drvdata(&chip->dev->dev, NULL);
> kfree(chip);
> return 0;
> }
>

Hi Takashi,

The patch fixed the problem on 4.9-rc4. Didn't get a chance
to test it on 4.8.7.

thanks,
-- Shuah

2016-11-14 21:06:51

by Takashi Iwai

[permalink] [raw]
Subject: Re: BUG: KASAN: use-after-free in snd_usb_audio_free

On Mon, 14 Nov 2016 17:55:54 +0100,
Shuah Khan wrote:
>
> On 11/14/2016 03:25 AM, Takashi Iwai wrote:
> > On Sat, 12 Nov 2016 00:34:38 +0100,
> > Shuah Khan wrote:
> >>
> >> Hi Takashi,
> >>
> >> I am seeing the following use-after-free error when I disconnect an
> >> USB speaker. I saw this on 4.9-rc4 and 4.8.7. There might be race
> >> condition between the disconnect and pcm close perhaps.
> >
> > Thanks, this looks like a new discovery.
> > Could you check whether the patch below works?
> >
> >
> > Takashi
> >
> > ---
> > diff --git a/sound/usb/card.c b/sound/usb/card.c
> > index 9e5276d6dda0..2ddc034673a8 100644
> > --- a/sound/usb/card.c
> > +++ b/sound/usb/card.c
> > @@ -315,7 +315,8 @@ static int snd_usb_audio_free(struct snd_usb_audio *chip)
> > snd_usb_endpoint_free(ep);
> >
> > mutex_destroy(&chip->mutex);
> > - dev_set_drvdata(&chip->dev->dev, NULL);
> > + if (!atomic_read(&chip->shutdown))
> > + dev_set_drvdata(&chip->dev->dev, NULL);
> > kfree(chip);
> > return 0;
> > }
> >
>
> Hi Takashi,
>
> The patch fixed the problem on 4.9-rc4. Didn't get a chance
> to test it on 4.8.7.

Thanks, this should fix for 4.8.x, too, as there hasn't been any
significant changes in usb-audio recently.

FWIW, below is the proper patch I'm going to queue.


Takashi

-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: usb-audio: Fix use-after-free of usb_device at
disconnect

The usb-audio driver implements the deferred device disconnection for
the device in use. In this mode, the disconnection callback returns
immediately while the actual ALSA card object removal happens later
when all files get closed. As Shuah reported, this code flow,
however, leads to a use-after-free, detected by KASAN:

BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10
Write of size 8 by task pulseaudio/2244
Call Trace:
[<ffffffff81b31473>] dump_stack+0x67/0x94
[<ffffffff81564ef1>] kasan_object_err+0x21/0x70
[<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0
[<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0
[<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50
[<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio]
[<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160 [snd_usb_audio]
[<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio]
[<ffffffff8243c78a>] __snd_device_free+0x12a/0x210
[<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0
[<ffffffff8242cae4>] release_card_device+0x34/0x130
[<ffffffff81ef1846>] device_release+0x76/0x1e0
[<ffffffff81b37ad7>] kobject_release+0x107/0x370
.....
Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048
Allocated:
[<ffffffff810804eb>] save_stack_trace+0x2b/0x50
[<ffffffff81564296>] save_stack+0x46/0xd0
[<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0
[<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240
[<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90
[<ffffffff8216349d>] hub_event+0xf1d/0x35f0
....
Freed:
[<ffffffff810804eb>] save_stack_trace+0x2b/0x50
[<ffffffff81564296>] save_stack+0x46/0xd0
[<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0
[<ffffffff81560929>] kfree+0xd9/0x280
[<ffffffff8214de6e>] usb_release_dev+0xde/0x110
[<ffffffff81ef1846>] device_release+0x76/0x1e0
....

It's the code trying to clear drvdata of the assigned usb_device where
the usb_device itself was already released in usb_release_dev() after
the disconnect callback.

This patch fixes it by checking whether the code path is via the
disconnect callback, i.e. chip->shutdown flag is set.

Fixes: 79289e24194a ('ALSA: usb-audio: Refer to chip->usb_id for quirks...')
Reported-and-tested-by: Shuah Khan <[email protected]>
Cc: <[email protected]> # v4.6+
Signed-off-by: Takashi Iwai <[email protected]>
---
sound/usb/card.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 9e5276d6dda0..2ddc034673a8 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -315,7 +315,8 @@ static int snd_usb_audio_free(struct snd_usb_audio *chip)
snd_usb_endpoint_free(ep);

mutex_destroy(&chip->mutex);
- dev_set_drvdata(&chip->dev->dev, NULL);
+ if (!atomic_read(&chip->shutdown))
+ dev_set_drvdata(&chip->dev->dev, NULL);
kfree(chip);
return 0;
}
--
2.10.2