It is useless to keep debug info in purgatory. And discarding them saves
about 200K space.
Original:
259080 kexec-purgatory.o
Stripped:
29152 kexec-purgatory.o
Signed-off-by: Pingfan Liu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Hans de Goede <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Arvind Sankar <[email protected]>
Cc: Steve Wahl <[email protected]>
Cc: [email protected]
To: [email protected]
---
arch/x86/purgatory/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 088bd76..4340ae6 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -16,7 +16,7 @@ CFLAGS_sha256.o := -D__DISABLE_EXPORTS
# When linking purgatory.ro with -r unresolved symbols are not checked,
# also link a purgatory.chk binary without -r to check for unresolved symbols.
-PURGATORY_LDFLAGS := -e purgatory_start -nostdlib -z nodefaultlib
+PURGATORY_LDFLAGS := -e purgatory_start -nostdlib -z nodefaultlib -S
LDFLAGS_purgatory.ro := -r $(PURGATORY_LDFLAGS)
LDFLAGS_purgatory.chk := $(PURGATORY_LDFLAGS)
targets += purgatory.ro purgatory.chk
--
2.7.5
On Thu, Jul 30, 2020 at 1:27 AM Pingfan Liu <[email protected]> wrote:
>
> It is useless to keep debug info in purgatory. And discarding them saves
> about 200K space.
>
> Original:
> 259080 kexec-purgatory.o
> Stripped:
> 29152 kexec-purgatory.o
>
> Signed-off-by: Pingfan Liu <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: Ingo Molnar <[email protected]>
> Cc: Borislav Petkov <[email protected]>
> Cc: "H. Peter Anvin" <[email protected]>
> Cc: Hans de Goede <[email protected]>
> Cc: Nick Desaulniers <[email protected]>
> Cc: Arvind Sankar <[email protected]>
> Cc: Steve Wahl <[email protected]>
> Cc: [email protected]
> To: [email protected]
I don't see any code in
arch/x86/purgatory/
arch/x86/include/asm/purgatory.h
include/linux/purgatory.h
include/uapi/linux/kexec.h
kernel/kexec*
include/linux/kexec.h
include/linux/crash_dump.h
kernel/crash_dump.c
arch/x86/kernel/crash*
https://github.com/horms/kexec-tools/tree/master/kexec/arch/x86_64
that mentions any kind of debug info section. I'm not sure what you'd
do with the debug info anyway for this binary. So I suspect this
information should ok to discard.
This works, but it might be faster to build to not generate the
compile info in the first place via compile flag `-g0`, which could be
added `ifdef CONFIG_DEBUG_INFO` or even just unconditionally. That
way we're not doing additional work to generate debug info, then
additional work to throw it away.
> ---
> arch/x86/purgatory/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
> index 088bd76..4340ae6 100644
> --- a/arch/x86/purgatory/Makefile
> +++ b/arch/x86/purgatory/Makefile
> @@ -16,7 +16,7 @@ CFLAGS_sha256.o := -D__DISABLE_EXPORTS
>
> # When linking purgatory.ro with -r unresolved symbols are not checked,
> # also link a purgatory.chk binary without -r to check for unresolved symbols.
> -PURGATORY_LDFLAGS := -e purgatory_start -nostdlib -z nodefaultlib
> +PURGATORY_LDFLAGS := -e purgatory_start -nostdlib -z nodefaultlib -S
> LDFLAGS_purgatory.ro := -r $(PURGATORY_LDFLAGS)
> LDFLAGS_purgatory.chk := $(PURGATORY_LDFLAGS)
> targets += purgatory.ro purgatory.chk
> --
> 2.7.5
>
--
Thanks,
~Nick Desaulniers
On Fri, Jul 31, 2020 at 7:11 AM Nick Desaulniers
<[email protected]> wrote:
>
> On Thu, Jul 30, 2020 at 1:27 AM Pingfan Liu <[email protected]> wrote:
> >
> > It is useless to keep debug info in purgatory. And discarding them saves
> > about 200K space.
> >
> > Original:
> > 259080 kexec-purgatory.o
> > Stripped:
> > 29152 kexec-purgatory.o
> >
> > Signed-off-by: Pingfan Liu <[email protected]>
> > Cc: Thomas Gleixner <[email protected]>
> > Cc: Ingo Molnar <[email protected]>
> > Cc: Borislav Petkov <[email protected]>
> > Cc: "H. Peter Anvin" <[email protected]>
> > Cc: Hans de Goede <[email protected]>
> > Cc: Nick Desaulniers <[email protected]>
> > Cc: Arvind Sankar <[email protected]>
> > Cc: Steve Wahl <[email protected]>
> > Cc: [email protected]
> > To: [email protected]
>
> I don't see any code in
> arch/x86/purgatory/
> arch/x86/include/asm/purgatory.h
> include/linux/purgatory.h
> include/uapi/linux/kexec.h
> kernel/kexec*
> include/linux/kexec.h
> include/linux/crash_dump.h
> kernel/crash_dump.c
> arch/x86/kernel/crash*
> https://github.com/horms/kexec-tools/tree/master/kexec/arch/x86_64
> that mentions any kind of debug info section. I'm not sure what you'd
> do with the debug info anyway for this binary. So I suspect this
> information should ok to discard.
>
> This works, but it might be faster to build to not generate the
> compile info in the first place via compile flag `-g0`, which could be
> added `ifdef CONFIG_DEBUG_INFO` or even just unconditionally. That
> way we're not doing additional work to generate debug info, then
> additional work to throw it away.
What about:
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 088bd76..7e1ad9e 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -32,7 +32,7 @@ KCOV_INSTRUMENT := n
# make up the standalone purgatory.ro
PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
-PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
+PURGATORY_CFLAGS := -mcmodel=large -ffreestanding
-fno-zero-initialized-in-bss -g0
PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
PURGATORY_CFLAGS += $(call cc-option,-fno-stack-protector)
Thanks,
Pingfan
On Fri, Jul 31, 2020 at 2:36 AM Pingfan Liu <[email protected]> wrote:
>
> On Fri, Jul 31, 2020 at 7:11 AM Nick Desaulniers
> <[email protected]> wrote:
> >
> > On Thu, Jul 30, 2020 at 1:27 AM Pingfan Liu <[email protected]> wrote:
> > >
> > > It is useless to keep debug info in purgatory. And discarding them saves
> > > about 200K space.
> > >
> > > Original:
> > > 259080 kexec-purgatory.o
> > > Stripped:
> > > 29152 kexec-purgatory.o
> > >
> > > Signed-off-by: Pingfan Liu <[email protected]>
> > > Cc: Thomas Gleixner <[email protected]>
> > > Cc: Ingo Molnar <[email protected]>
> > > Cc: Borislav Petkov <[email protected]>
> > > Cc: "H. Peter Anvin" <[email protected]>
> > > Cc: Hans de Goede <[email protected]>
> > > Cc: Nick Desaulniers <[email protected]>
> > > Cc: Arvind Sankar <[email protected]>
> > > Cc: Steve Wahl <[email protected]>
> > > Cc: [email protected]
> > > To: [email protected]
> >
> > I don't see any code in
> > arch/x86/purgatory/
> > arch/x86/include/asm/purgatory.h
> > include/linux/purgatory.h
> > include/uapi/linux/kexec.h
> > kernel/kexec*
> > include/linux/kexec.h
> > include/linux/crash_dump.h
> > kernel/crash_dump.c
> > arch/x86/kernel/crash*
> > https://github.com/horms/kexec-tools/tree/master/kexec/arch/x86_64
> > that mentions any kind of debug info section. I'm not sure what you'd
> > do with the debug info anyway for this binary. So I suspect this
> > information should ok to discard.
> >
> > This works, but it might be faster to build to not generate the
> > compile info in the first place via compile flag `-g0`, which could be
> > added `ifdef CONFIG_DEBUG_INFO` or even just unconditionally. That
> > way we're not doing additional work to generate debug info, then
> > additional work to throw it away.
> What about:
> diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
> index 088bd76..7e1ad9e 100644
> --- a/arch/x86/purgatory/Makefile
> +++ b/arch/x86/purgatory/Makefile
> @@ -32,7 +32,7 @@ KCOV_INSTRUMENT := n
> # make up the standalone purgatory.ro
>
> PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
> -PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
> +PURGATORY_CFLAGS := -mcmodel=large -ffreestanding
> -fno-zero-initialized-in-bss -g0
> PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
> PURGATORY_CFLAGS += $(call cc-option,-fno-stack-protector)
I tested your patch but still see .debug_* sections in the .ro from a few .o.
At least on
* setup-x86_64.o
* entry64.o
If you add the following hunk to your diff:
```
@@ -64,6 +64,9 @@ CFLAGS_sha256.o += $(PURGATORY_CFLAGS)
CFLAGS_REMOVE_string.o += $(PURGATORY_CFLAGS_REMOVE)
CFLAGS_string.o += $(PURGATORY_CFLAGS)
+AFLAGS_REMOVE_setup-x86_$(BITS).o += -Wa,-gdwarf-2
+AFLAGS_REMOVE_entry64.o += -Wa,-gdwarf-2
+
$(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
$(call if_changed,ld)
```
then that should do it. Then you can verify the .ro file via:
$ llvm-readelf -S arch/x86/purgatory/purgatory.ro | not grep debug_
(no output, should return zero)
--
Thanks,
~Nick Desaulniers
On Sat, Aug 1, 2020 at 2:18 AM Nick Desaulniers <[email protected]> wrote:
>
> On Fri, Jul 31, 2020 at 2:36 AM Pingfan Liu <[email protected]> wrote:
> >
> > On Fri, Jul 31, 2020 at 7:11 AM Nick Desaulniers
> > <[email protected]> wrote:
> > >
> > > On Thu, Jul 30, 2020 at 1:27 AM Pingfan Liu <[email protected]> wrote:
> > > >
> > > > It is useless to keep debug info in purgatory. And discarding them saves
> > > > about 200K space.
> > > >
> > > > Original:
> > > > 259080 kexec-purgatory.o
> > > > Stripped:
> > > > 29152 kexec-purgatory.o
> > > >
> > > > Signed-off-by: Pingfan Liu <[email protected]>
> > > > Cc: Thomas Gleixner <[email protected]>
> > > > Cc: Ingo Molnar <[email protected]>
> > > > Cc: Borislav Petkov <[email protected]>
> > > > Cc: "H. Peter Anvin" <[email protected]>
> > > > Cc: Hans de Goede <[email protected]>
> > > > Cc: Nick Desaulniers <[email protected]>
> > > > Cc: Arvind Sankar <[email protected]>
> > > > Cc: Steve Wahl <[email protected]>
> > > > Cc: [email protected]
> > > > To: [email protected]
> > >
> > > I don't see any code in
> > > arch/x86/purgatory/
> > > arch/x86/include/asm/purgatory.h
> > > include/linux/purgatory.h
> > > include/uapi/linux/kexec.h
> > > kernel/kexec*
> > > include/linux/kexec.h
> > > include/linux/crash_dump.h
> > > kernel/crash_dump.c
> > > arch/x86/kernel/crash*
> > > https://github.com/horms/kexec-tools/tree/master/kexec/arch/x86_64
> > > that mentions any kind of debug info section. I'm not sure what you'd
> > > do with the debug info anyway for this binary. So I suspect this
> > > information should ok to discard.
> > >
> > > This works, but it might be faster to build to not generate the
> > > compile info in the first place via compile flag `-g0`, which could be
> > > added `ifdef CONFIG_DEBUG_INFO` or even just unconditionally. That
> > > way we're not doing additional work to generate debug info, then
> > > additional work to throw it away.
> > What about:
> > diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
> > index 088bd76..7e1ad9e 100644
> > --- a/arch/x86/purgatory/Makefile
> > +++ b/arch/x86/purgatory/Makefile
> > @@ -32,7 +32,7 @@ KCOV_INSTRUMENT := n
> > # make up the standalone purgatory.ro
> >
> > PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
> > -PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
> > +PURGATORY_CFLAGS := -mcmodel=large -ffreestanding
> > -fno-zero-initialized-in-bss -g0
> > PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
> > PURGATORY_CFLAGS += $(call cc-option,-fno-stack-protector)
>
> I tested your patch but still see .debug_* sections in the .ro from a few .o.
>
> At least on
> * setup-x86_64.o
> * entry64.o
>
> If you add the following hunk to your diff:
> ```
> @@ -64,6 +64,9 @@ CFLAGS_sha256.o += $(PURGATORY_CFLAGS)
> CFLAGS_REMOVE_string.o += $(PURGATORY_CFLAGS_REMOVE)
> CFLAGS_string.o += $(PURGATORY_CFLAGS)
>
> +AFLAGS_REMOVE_setup-x86_$(BITS).o += -Wa,-gdwarf-2
> +AFLAGS_REMOVE_entry64.o += -Wa,-gdwarf-2
> +
Go through man as and gcc, and can not find a simpler method than your
suggestion.
> $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
> $(call if_changed,ld)
> ```
> then that should do it. Then you can verify the .ro file via:
> $ llvm-readelf -S arch/x86/purgatory/purgatory.ro | not grep debug_
> (no output, should return zero)
Thank you for your good suggestion and I will update V2
Regards,
Pingfan