Patch implements the handling of ZLP for control transfer.
To send the ZLP driver must prepare the extra TRB in TD with
length set to zero and TRB type to TRB_NORMAL.
The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1
and TRB type to TRB_DATA.
cc: <[email protected]>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <[email protected]>
---
drivers/usb/cdns3/cdnsp-ring.c | 42 ++++++++++++++++++++++++++--------
1 file changed, 32 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
index 86e1141e150f..fa1fa9b2ff38 100644
--- a/drivers/usb/cdns3/cdnsp-ring.c
+++ b/drivers/usb/cdns3/cdnsp-ring.c
@@ -2006,10 +2006,11 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
{
- u32 field, length_field, remainder;
+ u32 field, length_field, zlp = 0;
struct cdnsp_ep *pep = preq->pep;
struct cdnsp_ring *ep_ring;
int num_trbs;
+ u32 maxp;
int ret;
ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
@@ -2019,26 +2020,33 @@ int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
/* 1 TRB for data, 1 for status */
num_trbs = (pdev->three_stage_setup) ? 2 : 1;
+ maxp = usb_endpoint_maxp(pep->endpoint.desc);
+
+ if (preq->request.zero && preq->request.length &&
+ (preq->request.length % maxp == 0)) {
+ num_trbs++;
+ zlp = 1;
+ }
+
ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
if (ret)
return ret;
/* If there's data, queue data TRBs */
- if (pdev->ep0_expect_in)
- field = TRB_TYPE(TRB_DATA) | TRB_IOC;
- else
- field = TRB_ISP | TRB_TYPE(TRB_DATA) | TRB_IOC;
-
if (preq->request.length > 0) {
- remainder = cdnsp_td_remainder(pdev, 0, preq->request.length,
- preq->request.length, preq, 1, 0);
+ field = TRB_TYPE(TRB_DATA);
- length_field = TRB_LEN(preq->request.length) |
- TRB_TD_SIZE(remainder) | TRB_INTR_TARGET(0);
+ if (zlp)
+ field |= TRB_CHAIN;
+ else
+ field |= TRB_IOC | (pdev->ep0_expect_in ? 0 : TRB_ISP);
if (pdev->ep0_expect_in)
field |= TRB_DIR_IN;
+ length_field = TRB_LEN(preq->request.length) |
+ TRB_TD_SIZE(zlp) | TRB_INTR_TARGET(0);
+
cdnsp_queue_trb(pdev, ep_ring, true,
lower_32_bits(preq->request.dma),
upper_32_bits(preq->request.dma), length_field,
@@ -2046,6 +2054,20 @@ int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
TRB_SETUPID(pdev->setup_id) |
pdev->setup_speed);
+ if (zlp) {
+ field = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
+
+ if (!pdev->ep0_expect_in)
+ field = TRB_ISP;
+
+ cdnsp_queue_trb(pdev, ep_ring, true,
+ lower_32_bits(preq->request.dma),
+ upper_32_bits(preq->request.dma), 0,
+ field | ep_ring->cycle_state |
+ TRB_SETUPID(pdev->setup_id) |
+ pdev->setup_speed);
+ }
+
pdev->ep0_stage = CDNSP_DATA_STAGE;
}
--
2.25.1
On Tue, Nov 22, 2022 at 4:52 PM Pawel Laszczak <[email protected]> wrote:
>
> Patch implements the handling of ZLP for control transfer.
> To send the ZLP driver must prepare the extra TRB in TD with
> length set to zero and TRB type to TRB_NORMAL.
> The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1
> and TRB type to TRB_DATA.
>
> cc: <[email protected]>
> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
> Signed-off-by: Pawel Laszczak <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Peter
> ---
> drivers/usb/cdns3/cdnsp-ring.c | 42 ++++++++++++++++++++++++++--------
> 1 file changed, 32 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
> index 86e1141e150f..fa1fa9b2ff38 100644
> --- a/drivers/usb/cdns3/cdnsp-ring.c
> +++ b/drivers/usb/cdns3/cdnsp-ring.c
> @@ -2006,10 +2006,11 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
>
> int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
> {
> - u32 field, length_field, remainder;
> + u32 field, length_field, zlp = 0;
> struct cdnsp_ep *pep = preq->pep;
> struct cdnsp_ring *ep_ring;
> int num_trbs;
> + u32 maxp;
> int ret;
>
> ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
> @@ -2019,26 +2020,33 @@ int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
> /* 1 TRB for data, 1 for status */
> num_trbs = (pdev->three_stage_setup) ? 2 : 1;
>
> + maxp = usb_endpoint_maxp(pep->endpoint.desc);
> +
> + if (preq->request.zero && preq->request.length &&
> + (preq->request.length % maxp == 0)) {
> + num_trbs++;
> + zlp = 1;
> + }
> +
> ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
> if (ret)
> return ret;
>
> /* If there's data, queue data TRBs */
> - if (pdev->ep0_expect_in)
> - field = TRB_TYPE(TRB_DATA) | TRB_IOC;
> - else
> - field = TRB_ISP | TRB_TYPE(TRB_DATA) | TRB_IOC;
> -
> if (preq->request.length > 0) {
> - remainder = cdnsp_td_remainder(pdev, 0, preq->request.length,
> - preq->request.length, preq, 1, 0);
> + field = TRB_TYPE(TRB_DATA);
>
> - length_field = TRB_LEN(preq->request.length) |
> - TRB_TD_SIZE(remainder) | TRB_INTR_TARGET(0);
> + if (zlp)
> + field |= TRB_CHAIN;
> + else
> + field |= TRB_IOC | (pdev->ep0_expect_in ? 0 : TRB_ISP);
>
> if (pdev->ep0_expect_in)
> field |= TRB_DIR_IN;
>
> + length_field = TRB_LEN(preq->request.length) |
> + TRB_TD_SIZE(zlp) | TRB_INTR_TARGET(0);
> +
> cdnsp_queue_trb(pdev, ep_ring, true,
> lower_32_bits(preq->request.dma),
> upper_32_bits(preq->request.dma), length_field,
> @@ -2046,6 +2054,20 @@ int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
> TRB_SETUPID(pdev->setup_id) |
> pdev->setup_speed);
>
> + if (zlp) {
> + field = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
> +
> + if (!pdev->ep0_expect_in)
> + field = TRB_ISP;
> +
> + cdnsp_queue_trb(pdev, ep_ring, true,
> + lower_32_bits(preq->request.dma),
> + upper_32_bits(preq->request.dma), 0,
> + field | ep_ring->cycle_state |
> + TRB_SETUPID(pdev->setup_id) |
> + pdev->setup_speed);
> + }
> +
> pdev->ep0_stage = CDNSP_DATA_STAGE;
> }
>
> --
> 2.25.1
>