From: Fei Yang <[email protected]>
The following line of code in function ffs_epfile_io is trying to set
flag io_data->use_sg in case buffer required is larger than one page.
io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
However at this point of time the variable data_len has not been set
to the proper buffer size yet. The consequence is that io_data->use_sg
is always set regardless what buffer size really is, because the condition
(data_len > PAGE_SIZE) is effectively an unsigned comparison between
-EINVAL and PAGE_SIZE which would always result in TRUE.
Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers")
Signed-off-by: Fei Yang <[email protected]>
Cc: stable <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 47be961..c7ed900 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -997,7 +997,6 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
* earlier
*/
gadget = epfile->ffs->gadget;
- io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
spin_lock_irq(&epfile->ffs->eps_lock);
/* In the meantime, endpoint got disabled or changed. */
@@ -1012,6 +1011,8 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
*/
if (io_data->read)
data_len = usb_ep_align_maybe(gadget, ep->ep, data_len);
+
+ io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
spin_unlock_irq(&epfile->ffs->eps_lock);
data = ffs_alloc_buffer(io_data, data_len);
--
2.7.4
On Wed, Jun 12, 2019 at 3:13 PM <[email protected]> wrote:
>
> From: Fei Yang <[email protected]>
>
> The following line of code in function ffs_epfile_io is trying to set
> flag io_data->use_sg in case buffer required is larger than one page.
>
> io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
>
> However at this point of time the variable data_len has not been set
> to the proper buffer size yet. The consequence is that io_data->use_sg
> is always set regardless what buffer size really is, because the condition
> (data_len > PAGE_SIZE) is effectively an unsigned comparison between
> -EINVAL and PAGE_SIZE which would always result in TRUE.
>
> Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers")
> Signed-off-by: Fei Yang <[email protected]>
> Cc: stable <[email protected]>
Hey Fei! Thanks so much for sending this out! I was excited that this
might resolve the ffs stalls I've been seeing on dwc3/dwc2 hardware,
but when I gave it a shot, it doesn't seem to help. In fact, rather
then a stall, I end up seeing the following panic:
[ 383.415362] Unable to handle kernel read from unreadable memory at
virtual address 0000000000000018
[ 383.431935] Mem abort info:
[ 383.431937] ESR = 0x96000005
[ 383.431940] Exception class = DABT (current EL), IL = 32 bits
[ 383.431941] SET = 0, FnV = 0
[ 383.431942] EA = 0, S1PTW = 0
[ 383.431943] Data abort info:
[ 383.431945] ISV = 0, ISS = 0x00000005
[ 383.431946] CM = 0, WnR = 0
[ 383.431951] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000aae1f000
[ 383.431953] [0000000000000018] pgd=000000009f064003,
pud=000000009f064003, pmd=0000000000000000
[ 383.482560] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 383.488128] Modules linked in:
[ 383.491181] CPU: 0 PID: 399 Comm: irq/69-dwc3 Tainted: G S
5.2.0-rc4-00092-gf5f12f5d3fdd #296
[ 383.501002] Hardware name: HiKey960 (DT)
[ 383.504918] pstate: 20400085 (nzCv daIf +PAN -UAO)
[ 383.509714] pc : dma_direct_unmap_sg+0x38/0x80
[ 383.514151] lr : dma_direct_unmap_sg+0x5c/0x80
[ 383.518586] sp : ffffff8011fcbc40
[ 383.521893] x29: ffffff8011fcbc40 x28: ffffffc0bad9c180
[ 383.527199] x27: ffffffc0bae05300 x26: 0000000000000002
[ 383.532504] x25: ffffffc0b9a9fd00 x24: 0000000000000000
[ 383.537809] x23: 0000000000000001 x22: ffffffc0bad9fc10
[ 383.543114] x21: 0000000000000002 x20: 0000000000000001
[ 383.548420] x19: 0000000000000000 x18: 0000000000000000
[ 383.553726] x17: 0000000000000000 x16: 0000000000000000
[ 383.559032] x15: 0000000000000000 x14: ffffff8010eb6ad0
[ 383.564338] x13: 0000000000000000 x12: 0000000000000000
[ 383.569643] x11: 0000000000000000 x10: 00000000000009d0
[ 383.574949] x9 : ffffff8011fcbd20 x8 : ffffffc0b63c3a30
[ 383.580254] x7 : ffffffc0bc515c00 x6 : 0000000000000007
[ 383.585560] x5 : 0000000000000001 x4 : 0000000000000004
[ 383.590865] x3 : 0000000000000001 x2 : 0000000000000001
[ 383.596169] x1 : 000000000006bf42 x0 : 0000000000000000
[ 383.601477] Call trace:
[ 383.603916] dma_direct_unmap_sg+0x38/0x80
[ 383.608013] usb_gadget_unmap_request_by_dev+0xb0/0xc8
[ 383.613148] dwc3_gadget_del_and_unmap_request.isra.13+0x78/0x150
[ 383.619235] dwc3_gadget_giveback+0x30/0x68
[ 383.623412] dwc3_thread_interrupt+0x694/0x14e0
[ 383.627938] irq_thread_fn+0x28/0x78
[ 383.631506] irq_thread+0x124/0x1c0
[ 383.634991] kthread+0x128/0x130
[ 383.638214] ret_from_fork+0x10/0x1c
[ 383.641786] Code: 2a0303f7 aa0403f8 52800014 d503201f (b9401a62)
[ 383.647874] ---[ end trace f48053c2040c5658 ]---
From the looks of it though, I suspect your fix is a good one, and
maybe its just helping expose some related underlying issues in the
dwc3 driver?
thanks
-john
>> The following line of code in function ffs_epfile_io is trying to set
>> flag io_data->use_sg in case buffer required is larger than one page.
>>
>> io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
>>
>> However at this point of time the variable data_len has not been set
>> to the proper buffer size yet. The consequence is that io_data->use_sg
>> is always set regardless what buffer size really is, because the
>> condition (data_len > PAGE_SIZE) is effectively an unsigned comparison
>> between -EINVAL and PAGE_SIZE which would always result in TRUE.
>>
>> Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather
>> buffers")
>> Signed-off-by: Fei Yang <[email protected]>
>> Cc: stable <[email protected]>
>
> Hey Fei! Thanks so much for sending this out! I was excited that this might resolve
> the ffs stalls I've been seeing on dwc3/dwc2 hardware, but when I gave it a shot, it
> doesn't seem to help. In fact, rather then a stall, I end up seeing the following panic:
>
> [ 383.415362] Unable to handle kernel read from unreadable memory at virtual address 0000000000000018
> [ 383.431935] Mem abort info:
> [ 383.431937] ESR = 0x96000005
> [ 383.431940] Exception class = DABT (current EL), IL = 32 bits
> [ 383.431941] SET = 0, FnV = 0
> [ 383.431942] EA = 0, S1PTW = 0
> [ 383.431943] Data abort info:
> [ 383.431945] ISV = 0, ISS = 0x00000005
> [ 383.431946] CM = 0, WnR = 0
> [ 383.431951] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000aae1f000
> [ 383.431953] [0000000000000018] pgd=000000009f064003, pud=000000009f064003, pmd=0000000000000000
> [ 383.482560] Internal error: Oops: 96000005 [#1] PREEMPT SMP
> [ 383.488128] Modules linked in:
> [ 383.491181] CPU: 0 PID: 399 Comm: irq/69-dwc3 Tainted: G S
> 5.2.0-rc4-00092-gf5f12f5d3fdd #296 [ 383.501002] Hardware name: HiKey960 (DT)
> [ 383.504918] pstate: 20400085 (nzCv daIf +PAN -UAO)
> [ 383.509714] pc : dma_direct_unmap_sg+0x38/0x80
> [ 383.514151] lr : dma_direct_unmap_sg+0x5c/0x80
> [ 383.518586] sp : ffffff8011fcbc40
> [ 383.521893] x29: ffffff8011fcbc40 x28: ffffffc0bad9c180
> [ 383.527199] x27: ffffffc0bae05300 x26: 0000000000000002
> [ 383.532504] x25: ffffffc0b9a9fd00 x24: 0000000000000000
> [ 383.537809] x23: 0000000000000001 x22: ffffffc0bad9fc10
> [ 383.543114] x21: 0000000000000002 x20: 0000000000000001
> [ 383.548420] x19: 0000000000000000 x18: 0000000000000000
> [ 383.553726] x17: 0000000000000000 x16: 0000000000000000
> [ 383.559032] x15: 0000000000000000 x14: ffffff8010eb6ad0
> [ 383.564338] x13: 0000000000000000 x12: 0000000000000000
> [ 383.569643] x11: 0000000000000000 x10: 00000000000009d0
> [ 383.574949] x9 : ffffff8011fcbd20 x8 : ffffffc0b63c3a30
> [ 383.580254] x7 : ffffffc0bc515c00 x6 : 0000000000000007
> [ 383.585560] x5 : 0000000000000001 x4 : 0000000000000004
> [ 383.590865] x3 : 0000000000000001 x2 : 0000000000000001
> [ 383.596169] x1 : 000000000006bf42 x0 : 0000000000000000
> [ 383.601477] Call trace:
> [ 383.603916] dma_direct_unmap_sg+0x38/0x80
> [ 383.608013] usb_gadget_unmap_request_by_dev+0xb0/0xc8
> [ 383.613148] dwc3_gadget_del_and_unmap_request.isra.13+0x78/0x150
> [ 383.619235] dwc3_gadget_giveback+0x30/0x68
> [ 383.623412] dwc3_thread_interrupt+0x694/0x14e0
> [ 383.627938] irq_thread_fn+0x28/0x78
> [ 383.631506] irq_thread+0x124/0x1c0
> [ 383.634991] kthread+0x128/0x130
> [ 383.638214] ret_from_fork+0x10/0x1c
> [ 383.641786] Code: 2a0303f7 aa0403f8 52800014 d503201f (b9401a62)
> [ 383.647874] ---[ end trace f48053c2040c5658 ]---
>
> From the looks of it though, I suspect your fix is a good one, and maybe its just helping
> expose some related underlying issues in the dwc3 driver?
It doesn't fix the ffs stall issue for me either, but I have not seen this panic though.
It's interesting to see this panic because dma unmapping is what I'm looking at right now.
When I see the ffs stalls, the problem seems to be that a read request of 512 bytes returning
right away with a buffer filled with all zeros. And that is happening after a bunch of requests
of 16384 bytes. I'm suspecting the dma as well, because the completion interrupt for this
request of 512 bytes seems to be fired mistakenly.
I don't always have time to work on this issue though, might not update for a while. Please
keep me posted if you find anything.
Thanks,
-Fei