IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts am200epdkit_defconfig to use libata PATA
drivers.
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/am200epdkit_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index f0dea52..113a5d8 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -55,8 +55,9 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PXA2XX=y
CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_SD=m
+CONFIG_ATA=m
+CONFIG_PATA_PCMCIA=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=m
--
1.9.1
This patch disables deprecated IDE subsystem in assabet_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/assabet_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index 558ecd8..ab19ff1 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -34,7 +34,6 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCMCIA=y
--
1.9.1
This patch disables deprecated IDE subsystem in badge4_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/badge4_defconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index d590098..2a604aa 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -42,8 +42,6 @@ CONFIG_MTD_SA1100=y
CONFIG_PARPORT=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECD=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
--
1.9.1
This patch disables deprecated IDE subsystem in cerfcube_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/cerfcube_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index dce912d..57a2a18 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -39,7 +39,6 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
--
1.9.1
This patch disables deprecated IDE subsystem in colibri_pxa270_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/colibri_pxa270_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 18c311a..7154e55 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -83,7 +83,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts collie_defconfig to use libata PATA
drivers.
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/collie_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 6c56ad0..4e6b68f 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -43,8 +43,9 @@ CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts corgi_defconfig to use libata PATA
drivers.
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/corgi_defconfig | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index c1470a0..462533b 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -99,15 +99,14 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_CATC=m
--
1.9.1
This patch disables deprecated IDE subsystem in footbridge_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Russell King <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/footbridge_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 87e020f..cd7a001 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -66,7 +66,6 @@ CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts h3600_defconfig to use libata PATA
drivers.
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/h3600_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 0142ec3..ebeca11 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -39,8 +39,9 @@ CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PPP=m
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts ixp4xx_defconfig to use libata PATA
drivers.
Cc: Imre Kaloz <[email protected]>
Cc: Krzysztof Halasa <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/ixp4xx_defconfig | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 24636cf..6414f24 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -127,16 +127,17 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_EEPROM_LEGACY=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_SATA_VIA=y
CONFIG_PATA_ARTOP=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_PDC2027X=y
CONFIG_PATA_IXP4XX_CF=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts jornada720_defconfig to use libata PATA
drivers.
Cc: Kristoffer Ericson <[email protected]>
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/jornada720_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index ea80e7e..9056284 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -29,8 +29,9 @@ CONFIG_SA1100_FIR=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
--
1.9.1
This patch disables deprecated IDE subsystem in lart_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/lart_defconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index faa2865..8fc6fd0 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -36,8 +36,6 @@ CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_LART=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECD=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
--
1.9.1
This patch disables deprecated IDE subsystem in lpd270_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/lpd270_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index 1c8c9ee..a9dd1e9 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -31,7 +31,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
--
1.9.1
This patch disables deprecated IDE subsystem in mainstone_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/mainstone_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index 04efa1b..e8d26b8 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -27,7 +27,6 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts netwinder_defconfig to use libata PATA
drivers.
Cc: Russell King <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/netwinder_defconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 25ed772..a890a93 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -7,7 +7,7 @@ CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=0x301"
+CONFIG_CMDLINE="root=0x801"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
CONFIG_NET=y
@@ -26,8 +26,9 @@ CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_WINBOND=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts omap1_defconfig to use libata PATA
drivers.
Cc: Tony Lindgren <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/omap1_defconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 0c8a787..6ffc984 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -96,14 +96,14 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=m
+CONFIG_PATA_PCMCIA=m
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_PHYLIB=y
--
1.9.1
This patch disables deprecated IDE subsystem in pxa255-idp_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/pxa255-idp_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 917a070b..088627a 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -28,7 +28,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts s3c2410_defconfig to use libata PATA
drivers.
Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: [email protected]
Cc: Ben Dooks <[email protected]>
Cc: Vincent Sanders <[email protected]>
Cc: Simtec Linux Team <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/s3c2410_defconfig | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f314236..f44fa09 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -220,20 +220,16 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_DM9000=y
CONFIG_INPUT_EVDEV=y
--
1.9.1
This patch disables deprecated IDE subsystem in shannon_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/shannon_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index b0b9694..e523956 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -25,7 +25,6 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCMCIA=y
--
1.9.1
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts spitz_defconfig to use libata PATA
drivers.
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
Build tested only.
If you have affected hardware please test. Thank you.
arch/arm/configs/spitz_defconfig | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index a1ede19..d8c5293 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -96,15 +96,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_CATC=m
--
1.9.1
This patch disables deprecated IDE subsystem in trizeps4_defconfig
(ide-cs host driver is selected in this config but pata_pcmcia
libata PATA host driver is also selected so ide-cs is redundant
and can be disabled together with the whole IDE subsystem).
Cc: Daniel Mack <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
arch/arm/configs/trizeps4_defconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 932ee4e..cb3226a 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -94,8 +94,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
--
1.9.1
2015-08-14 20:04 GMT+03:00 Bartlomiej Zolnierkiewicz <[email protected]>:
> IDE subsystem has been deprecated since 2009 and the majority
> (if not all) of Linux distributions have switched to use
> libata for ATA support exclusively. However there are still
> some users (mostly old or/and embedded non-x86 systems) that
> have not converted from using IDE subsystem to libata PATA
> drivers. This doesn't seem to be good thing in the long-term
> for Linux as while there is less and less PATA systems left
> in use:
>
> * testing efforts are divided between two subsystems
>
> * having duplicate drivers for same hardware confuses users
>
> This patch converts collie_defconfig to use libata PATA
> drivers.
>
> Cc: Dmitry Eremin-Solenikov <[email protected]>
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Dmitry Eremin-Solenikov <[email protected]>
--
With best wishes
Dmitry
On Fri, Aug 14, 2015 at 07:04:23PM +0200, Bartlomiej Zolnierkiewicz wrote:
> This patch disables deprecated IDE subsystem in footbridge_defconfig
> (no IDE host drivers are selected in this config so there is no valid
> reason to enable IDE subsystem itself).
That's actually incorrect. I use IDE on Footbridge because it works
loads with my CY82C693 board. I never submitted the patches which make
CY82C693 work on ARM though...
However, the CY82C693 must not be allowed to use DMA (which is why the
ATA driver can't be used) - if it does, it locks the PCI bus. It's
a hardware incompatibility between some PCI devices and the Footbridge.
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
Hi,
On Friday, August 14, 2015 06:43:30 PM Russell King - ARM Linux wrote:
> On Fri, Aug 14, 2015 at 07:04:23PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > This patch disables deprecated IDE subsystem in footbridge_defconfig
> > (no IDE host drivers are selected in this config so there is no valid
> > reason to enable IDE subsystem itself).
>
> That's actually incorrect. I use IDE on Footbridge because it works
> loads with my CY82C693 board. I never submitted the patches which make
> CY82C693 work on ARM though...
>
> However, the CY82C693 must not be allowed to use DMA (which is why the
> ATA driver can't be used) - if it does, it locks the PCI bus. It's
> a hardware incompatibility between some PCI devices and the Footbridge.
PATA driver is the same in this regard as IDE one. They both try to
use DMA if supported by a device. Would be great if you could fix
them (or at least PATA one) to limit your setup to PIO automatically
(please also note that you can limit libata to PIO manually these
days).
When it comes to CY82C693 there is also a leftover issue with PATA
driver that it only supports primary interface currently (BTW this is
why I left Alpha's defconfig alone for now - it uses CY82C693). I can
look into fixing this (or assist in this work) if you are interested
in it.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
On Fri, Aug 14, 2015 at 08:08:13PM +0200, Bartlomiej Zolnierkiewicz wrote:
> On Friday, August 14, 2015 06:43:30 PM Russell King - ARM Linux wrote:
> > On Fri, Aug 14, 2015 at 07:04:23PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > This patch disables deprecated IDE subsystem in footbridge_defconfig
> > > (no IDE host drivers are selected in this config so there is no valid
> > > reason to enable IDE subsystem itself).
> >
> > That's actually incorrect. I use IDE on Footbridge because it works
> > loads with my CY82C693 board. I never submitted the patches which make
> > CY82C693 work on ARM though...
> >
> > However, the CY82C693 must not be allowed to use DMA (which is why the
> > ATA driver can't be used) - if it does, it locks the PCI bus. It's
> > a hardware incompatibility between some PCI devices and the Footbridge.
>
> PATA driver is the same in this regard as IDE one. They both try to
> use DMA if supported by a device. Would be great if you could fix
> them (or at least PATA one) to limit your setup to PIO automatically
> (please also note that you can limit libata to PIO manually these
> days).
>
> When it comes to CY82C693 there is also a leftover issue with PATA
> driver that it only supports primary interface currently (BTW this is
> why I left Alpha's defconfig alone for now - it uses CY82C693). I can
> look into fixing this (or assist in this work) if you are interested
> in it.
Well, it looks like the PCI layer has been screwed for this for some time:
cy82c693 0000:00:06.1: IDE controller (0x1080:0xc693 rev 0x00)
Cypress_IDE 0000:00:06.1: device not available (can't reserve [io 0x0170-0x0177])
Cypress_IDE 0000:00:06.1: device not available (can't reserve [io 0x0170-0x0177])
cy82c693 0000:00:06.1: couldn't enable device
Cypress_IDE: probe of 0000:00:06.1 failed with error -22
The PCI layer forces the standard legacy ports onto the Cypress device,
and then the "primary" resources get null'd out by the long-standing
CY82C693 quirk in the ARM bios32.c.
However - the ARM quick is not what causes the above - the above looks
to be caused by the generic PCI code going wrong - it adds those
legacy resources, and nothing ever connects them to the resource tree:
000000a0-000000bf : pic2
000000c0-000000df : dma2
00000213-00000213 : ISAPnP
000002f8-000002ff : serial8250.0
which then causes pci_enable_device() to fail.
I doubt CY82C693 even works on Alpha... or any IDE interface using the
legacy IO ports... So it may take quite a bit of work to get going
again - not something I'm going to attempt prior to the 4.3 merge
window.
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
Bartlomiej Zolnierkiewicz <[email protected]> writes:
> This patch disables deprecated IDE subsystem in mainstone_defconfig
> (no IDE host drivers are selected in this config so there is no valid
> reason to enable IDE subsystem itself).
>
> Cc: Daniel Mack <[email protected]>
> Cc: Haojian Zhuang <[email protected]>
> Cc: Robert Jarzmik <[email protected]>
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
--
Robert
* Bartlomiej Zolnierkiewicz <[email protected]> [150814 10:10]:
> IDE subsystem has been deprecated since 2009 and the majority
> (if not all) of Linux distributions have switched to use
> libata for ATA support exclusively. However there are still
> some users (mostly old or/and embedded non-x86 systems) that
> have not converted from using IDE subsystem to libata PATA
> drivers. This doesn't seem to be good thing in the long-term
> for Linux as while there is less and less PATA systems left
> in use:
>
> * testing efforts are divided between two subsystems
>
> * having duplicate drivers for same hardware confuses users
>
> This patch converts omap1_defconfig to use libata PATA
> drivers.
>
> Cc: Tony Lindgren <[email protected]>
> Cc: [email protected]
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
> ---
> Build tested only.
> If you have affected hardware please test. Thank you.
All my omap1 devices are in a rack using NFSroot or MMC so
I can't test this. Seems like a good idea to me thoug, and does
not cause merge conflicts. So if you want to queue this via
along with other PATA related patches, please feel free to
add:
Acked-by: Tony Lindgren <[email protected]>
> arch/arm/configs/omap1_defconfig | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
> index 0c8a787..6ffc984 100644
> --- a/arch/arm/configs/omap1_defconfig
> +++ b/arch/arm/configs/omap1_defconfig
> @@ -96,14 +96,14 @@ CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=2
> CONFIG_BLK_DEV_RAM_SIZE=8192
> -CONFIG_IDE=m
> -CONFIG_BLK_DEV_IDECS=m
> CONFIG_SCSI=y
> # CONFIG_SCSI_PROC_FS is not set
> CONFIG_BLK_DEV_SD=y
> CONFIG_CHR_DEV_ST=y
> CONFIG_BLK_DEV_SR=y
> CONFIG_CHR_DEV_SG=y
> +CONFIG_ATA=m
> +CONFIG_PATA_PCMCIA=m
> CONFIG_NETDEVICES=y
> CONFIG_TUN=y
> CONFIG_PHYLIB=y
> --
> 1.9.1
>