With the recent addition of of_pci_prop_ranges() in commit 407d1a51921e
("PCI: Create device tree node for bridge"), the ranges property can
have a 3 cells child address, a 3 cells parent address and a 2 cells
child size.
A range item property for a PCI device is filled as follow:
<BAR_nbr> 0 0 <phys.hi> <phys.mid> <phys.low> <BAR_sizeh> <BAR_sizel>
<-- Child --> <-- Parent (PCI definition) --> <- BAR size (64bit) -->
This allow to translate BAR addresses from the DT. For instance:
pci@0,0 {
#address-cells = <0x03>;
#size-cells = <0x02>;
device_type = "pci";
compatible = "pci11ab,100\0pciclass,060400\0pciclass,0604";
ranges = <0x82000000 0x00 0xe8000000
0x82000000 0x00 0xe8000000
0x00 0x4400000>;
...
dev@0,0 {
#address-cells = <0x03>;
#size-cells = <0x02>;
compatible = "pci1055,9660\0pciclass,020000\0pciclass,0200";
/* Translations for BAR0 to BAR5 */
ranges = <0x00 0x00 0x00 0x82010000 0x00 0xe8000000 0x00 0x2000000
0x01 0x00 0x00 0x82010000 0x00 0xea000000 0x00 0x1000000
0x02 0x00 0x00 0x82010000 0x00 0xeb000000 0x00 0x800000
0x03 0x00 0x00 0x82010000 0x00 0xeb800000 0x00 0x800000
0x04 0x00 0x00 0x82010000 0x00 0xec000000 0x00 0x20000
0x05 0x00 0x00 0x82010000 0x00 0xec020000 0x00 0x2000>;
...
pci-ep-bus@0 {
#address-cells = <0x01>;
#size-cells = <0x01>;
compatible = "simple-bus";
/* Translate 0xe2000000 to BAR0 and 0xe0000000 to BAR1 */
ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
0xe0000000 0x01 0x00 0x00 0x1000000>;
...
};
};
};
During the translation process, the "default-flags" map() function is
used to select the matching item in the ranges table and determine the
address offset from this matching item.
This map() function simply calls of_read_number() and when address-size
is greater than 2, the map() function skips the extra high address part
(ie part over 64bit). This lead to a wrong matching item and a wrong
offset computation.
Also during the translation itself, the extra high part related to the
parent address is not present in the translated address.
Fix the "default-flags" map() and translate() in order to take into
account the child extra high address part in map() and the parent extra
high address part in translate() and so having a correct address
translation for ranges patterns such as the one given in the example
above.
Signed-off-by: Herve Codina <[email protected]>
---
drivers/of/address.c | 56 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 54 insertions(+), 2 deletions(-)
diff --git a/drivers/of/address.c b/drivers/of/address.c
index e692809ff822..8665de3a6344 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -100,6 +100,58 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
return IORESOURCE_MEM;
}
+static bool of_addr_is_equal(const __be32 *addr1, const __be32 *addr2, int na)
+{
+ int i;
+ u32 a1;
+ u32 a2;
+
+ for (i = 0; i < na; i++) {
+ a1 = be32_to_cpup(addr1 + i);
+ a2 = be32_to_cpup(addr2 + i);
+ if (a1 == a2)
+ continue;
+ return false;
+ }
+ return true;
+}
+
+static u64 of_bus_default_flags_map(__be32 *addr, const __be32 *range, int na,
+ int ns, int pna)
+{
+ u64 cp, s, da;
+ int extra = 0;
+
+ if (na > 2) {
+ /*
+ * Given address contains more than 2 cells.
+ * The address high extra part must match the range extra part
+ * and must be filtered-out from 64bit offset computation.
+ */
+ extra = na - 2;
+ if (!of_addr_is_equal(addr, range, extra))
+ return OF_BAD_ADDR;
+
+ cp = of_read_number(range + extra, na - extra);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + extra, na - extra);
+ } else {
+ cp = of_read_number(range, na);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr, na);
+ }
+ pr_debug("default flags map, extra=%d cp=%llx, s=%llx, da=%llx\n", extra, cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_default_flags_translate(__be32 *addr, u64 offset, int na)
+{
+ /* Keep "flags" part in translated address */
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
#ifdef CONFIG_PCI
static unsigned int of_bus_pci_get_flags(const __be32 *addr)
@@ -374,8 +426,8 @@ static struct of_bus of_busses[] = {
.addresses = "reg",
.match = of_bus_default_flags_match,
.count_cells = of_bus_default_count_cells,
- .map = of_bus_default_map,
- .translate = of_bus_default_translate,
+ .map = of_bus_default_flags_map,
+ .translate = of_bus_default_flags_translate,
.has_flags = true,
.get_flags = of_bus_default_flags_get_flags,
},
--
2.41.0
On Tue, Oct 3, 2023 at 1:53 AM Herve Codina <[email protected]> wrote:
>
> With the recent addition of of_pci_prop_ranges() in commit 407d1a51921e
> ("PCI: Create device tree node for bridge"), the ranges property can
> have a 3 cells child address, a 3 cells parent address and a 2 cells
> child size.
Sigh. I'm starting to regret applying this for 6.6... You failed to Cc
the AMD folks too. Lizhi now added.
What's different here from the test cases? The having 3 cells in
parent and child?
>
> A range item property for a PCI device is filled as follow:
> <BAR_nbr> 0 0 <phys.hi> <phys.mid> <phys.low> <BAR_sizeh> <BAR_sizel>
> <-- Child --> <-- Parent (PCI definition) --> <- BAR size (64bit) -->
>
> This allow to translate BAR addresses from the DT. For instance:
> pci@0,0 {
> #address-cells = <0x03>;
> #size-cells = <0x02>;
> device_type = "pci";
> compatible = "pci11ab,100\0pciclass,060400\0pciclass,0604";
> ranges = <0x82000000 0x00 0xe8000000
> 0x82000000 0x00 0xe8000000
> 0x00 0x4400000>;
> ...
> dev@0,0 {
> #address-cells = <0x03>;
> #size-cells = <0x02>;
> compatible = "pci1055,9660\0pciclass,020000\0pciclass,0200";
> /* Translations for BAR0 to BAR5 */
> ranges = <0x00 0x00 0x00 0x82010000 0x00 0xe8000000 0x00 0x2000000
> 0x01 0x00 0x00 0x82010000 0x00 0xea000000 0x00 0x1000000
> 0x02 0x00 0x00 0x82010000 0x00 0xeb000000 0x00 0x800000
> 0x03 0x00 0x00 0x82010000 0x00 0xeb800000 0x00 0x800000
> 0x04 0x00 0x00 0x82010000 0x00 0xec000000 0x00 0x20000
> 0x05 0x00 0x00 0x82010000 0x00 0xec020000 0x00 0x2000>;
> ...
> pci-ep-bus@0 {
> #address-cells = <0x01>;
> #size-cells = <0x01>;
> compatible = "simple-bus";
> /* Translate 0xe2000000 to BAR0 and 0xe0000000 to BAR1 */
> ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
> 0xe0000000 0x01 0x00 0x00 0x1000000>;
Why are you reusing a PCI bus address value for the child bus? I'm
wondering if this is some hackery because the child devices need PCI
addresses to work. What address does a device need for DMA for
example?
Also, I think each BAR should be a separate child. We need to
formalize this BAR addressing in a schema.
> ...
> };
> };
> };
>
> During the translation process, the "default-flags" map() function is
> used to select the matching item in the ranges table and determine the
> address offset from this matching item.
> This map() function simply calls of_read_number() and when address-size
> is greater than 2, the map() function skips the extra high address part
> (ie part over 64bit). This lead to a wrong matching item and a wrong
> offset computation.
> Also during the translation itself, the extra high part related to the
> parent address is not present in the translated address.
>
> Fix the "default-flags" map() and translate() in order to take into
> account the child extra high address part in map() and the parent extra
> high address part in translate() and so having a correct address
> translation for ranges patterns such as the one given in the example
> above.
Please add a test case for this.
>
> Signed-off-by: Herve Codina <[email protected]>
> ---
> drivers/of/address.c | 56 ++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index e692809ff822..8665de3a6344 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -100,6 +100,58 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
> return IORESOURCE_MEM;
> }
>
> +static bool of_addr_is_equal(const __be32 *addr1, const __be32 *addr2, int na)
> +{
> + int i;
> + u32 a1;
> + u32 a2;
> +
> + for (i = 0; i < na; i++) {
> + a1 = be32_to_cpup(addr1 + i);
> + a2 = be32_to_cpup(addr2 + i);
You don't need to do the swap. Then isn't this just a memcmp?
> + if (a1 == a2)
> + continue;
> + return false;
> + }
> + return true;
> +}
> +
> +static u64 of_bus_default_flags_map(__be32 *addr, const __be32 *range, int na,
> + int ns, int pna)
> +{
> + u64 cp, s, da;
> + int extra = 0;
> +
> + if (na > 2) {
I believe this clause works for na==2. It wouldn't for na==1 though.
All you really need is:
if (na == 3)
extra = 1;
But at this point, don't we know we have a 3rd cell? We've only
matched if we do, right? If "extra" is always 1, then this function is
pretty much the same as the PCI and ISA versions after the flags
comparison.
> + /*
> + * Given address contains more than 2 cells.
> + * The address high extra part must match the range extra part
> + * and must be filtered-out from 64bit offset computation.
> + */
> + extra = na - 2;
> + if (!of_addr_is_equal(addr, range, extra))
A bit misleading as all you are doing is comparing the 3rd (top) cell.
> + return OF_BAD_ADDR;
> +
> + cp = of_read_number(range + extra, na - extra);
> + s = of_read_number(range + na + pna, ns);
> + da = of_read_number(addr + extra, na - extra);
> + } else {
> + cp = of_read_number(range, na);
> + s = of_read_number(range + na + pna, ns);
> + da = of_read_number(addr, na);
> + }
> + pr_debug("default flags map, extra=%d cp=%llx, s=%llx, da=%llx\n", extra, cp, s, da);
> +
> + if (da < cp || da >= (cp + s))
> + return OF_BAD_ADDR;
> + return da - cp;
> +}
> +
> +static int of_bus_default_flags_translate(__be32 *addr, u64 offset, int na)
Same as of_bus_pci_translate() and of_bus_isa_translate(). 3rd case
gets to rename and consolidate.
> +{
> + /* Keep "flags" part in translated address */
> + return of_bus_default_translate(addr + 1, offset, na - 1);
> +}
>
> #ifdef CONFIG_PCI
> static unsigned int of_bus_pci_get_flags(const __be32 *addr)
> @@ -374,8 +426,8 @@ static struct of_bus of_busses[] = {
> .addresses = "reg",
> .match = of_bus_default_flags_match,
> .count_cells = of_bus_default_count_cells,
> - .map = of_bus_default_map,
> - .translate = of_bus_default_translate,
> + .map = of_bus_default_flags_map,
> + .translate = of_bus_default_flags_translate,
> .has_flags = true,
> .get_flags = of_bus_default_flags_get_flags,
> },
> --
> 2.41.0
>
On Tue, 3 Oct 2023 16:12:25 -0500
Rob Herring <[email protected]> wrote:
> On Tue, Oct 3, 2023 at 1:53 AM Herve Codina <[email protected]> wrote:
> >
> > With the recent addition of of_pci_prop_ranges() in commit 407d1a51921e
> > ("PCI: Create device tree node for bridge"), the ranges property can
> > have a 3 cells child address, a 3 cells parent address and a 2 cells
> > child size.
>
> Sigh. I'm starting to regret applying this for 6.6... You failed to Cc
> the AMD folks too. Lizhi now added.
>
> What's different here from the test cases? The having 3 cells in
> parent and child?
Are you talking about of_unittest_pci_node()?
I so, only BAR0 is used and the DT overlay is
fragment@0 {
target-path="";
__overlay__ {
#address-cells = <3>;
#size-cells = <2>;
pci-ep-bus@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x0 0x1000>;
reg = <0 0 0 0 0>;
unittest-pci@100 {
compatible = "unittest-pci";
reg = <0x100 0x200>;
};
};
};
};
>
> >
> > A range item property for a PCI device is filled as follow:
> > <BAR_nbr> 0 0 <phys.hi> <phys.mid> <phys.low> <BAR_sizeh> <BAR_sizel>
> > <-- Child --> <-- Parent (PCI definition) --> <- BAR size (64bit) -->
> >
> > This allow to translate BAR addresses from the DT. For instance:
> > pci@0,0 {
> > #address-cells = <0x03>;
> > #size-cells = <0x02>;
> > device_type = "pci";
> > compatible = "pci11ab,100\0pciclass,060400\0pciclass,0604";
> > ranges = <0x82000000 0x00 0xe8000000
> > 0x82000000 0x00 0xe8000000
> > 0x00 0x4400000>;
> > ...
> > dev@0,0 {
> > #address-cells = <0x03>;
> > #size-cells = <0x02>;
> > compatible = "pci1055,9660\0pciclass,020000\0pciclass,0200";
> > /* Translations for BAR0 to BAR5 */
> > ranges = <0x00 0x00 0x00 0x82010000 0x00 0xe8000000 0x00 0x2000000
> > 0x01 0x00 0x00 0x82010000 0x00 0xea000000 0x00 0x1000000
> > 0x02 0x00 0x00 0x82010000 0x00 0xeb000000 0x00 0x800000
> > 0x03 0x00 0x00 0x82010000 0x00 0xeb800000 0x00 0x800000
> > 0x04 0x00 0x00 0x82010000 0x00 0xec000000 0x00 0x20000
> > 0x05 0x00 0x00 0x82010000 0x00 0xec020000 0x00 0x2000>;
> > ...
> > pci-ep-bus@0 {
> > #address-cells = <0x01>;
> > #size-cells = <0x01>;
> > compatible = "simple-bus";
> > /* Translate 0xe2000000 to BAR0 and 0xe0000000 to BAR1 */
> > ranges = <0xe2000000 0x00 0x00 0x00 0x20000000
> > 0xe0000000 0x01 0x00 0x00 0x1000000>;
>
> Why are you reusing a PCI bus address value for the child bus? I'm
> wondering if this is some hackery because the child devices need PCI
> addresses to work. What address does a device need for DMA for
> example?
I don't think I re-use a PCI bus address.
In my device datasheet, 0xe2000000 to 0xe3ffffff are mapped to BAR0 and
0xe0000000 to 0xe0FFFFFF are mapped to BAR1.
And so, all devices use this kind of addresses in their 'reg' property.
>
> Also, I think each BAR should be a separate child. We need to
> formalize this BAR addressing in a schema.
I am not sure that we should describe the hardware with a tree based on
BAR. On my system, some devices use two BARs.
For instance, I have a 'microchip,lan966x-switch'
https://elixir.bootlin.com/linux/v6.5/source/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
This devices use two values (two reg set) for its reg property.
On my system, this device is accessed through the PCI bus and one reg set
should be accessed using BAR0 and the other set using BAR1.
Having a tree based on BARs will break this kind of devices.
>
> > ...
> > };
> > };
> > };
> >
> > During the translation process, the "default-flags" map() function is
> > used to select the matching item in the ranges table and determine the
> > address offset from this matching item.
> > This map() function simply calls of_read_number() and when address-size
> > is greater than 2, the map() function skips the extra high address part
> > (ie part over 64bit). This lead to a wrong matching item and a wrong
> > offset computation.
> > Also during the translation itself, the extra high part related to the
> > parent address is not present in the translated address.
> >
> > Fix the "default-flags" map() and translate() in order to take into
> > account the child extra high address part in map() and the parent extra
> > high address part in translate() and so having a correct address
> > translation for ranges patterns such as the one given in the example
> > above.
>
> Please add a test case for this.
Should I add it in the of_unittest_pci_node() or create a new unittest
dedicated to this translation test?
>
> >
> > Signed-off-by: Herve Codina <[email protected]>
> > ---
> > drivers/of/address.c | 56 ++++++++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 54 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/of/address.c b/drivers/of/address.c
> > index e692809ff822..8665de3a6344 100644
> > --- a/drivers/of/address.c
> > +++ b/drivers/of/address.c
> > @@ -100,6 +100,58 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
> > return IORESOURCE_MEM;
> > }
> >
> > +static bool of_addr_is_equal(const __be32 *addr1, const __be32 *addr2, int na)
> > +{
> > + int i;
> > + u32 a1;
> > + u32 a2;
> > +
> > + for (i = 0; i < na; i++) {
> > + a1 = be32_to_cpup(addr1 + i);
> > + a2 = be32_to_cpup(addr2 + i);
>
> You don't need to do the swap. Then isn't this just a memcmp?
Indeed, I will remove the swap in the next iteration.
>
> > + if (a1 == a2)
> > + continue;
> > + return false;
> > + }
> > + return true;
> > +}
> > +
> > +static u64 of_bus_default_flags_map(__be32 *addr, const __be32 *range, int na,
> > + int ns, int pna)
> > +{
> > + u64 cp, s, da;
> > + int extra = 0;
> > +
> > + if (na > 2) {
>
> I believe this clause works for na==2. It wouldn't for na==1 though.
> All you really need is:
>
> if (na == 3)
> extra = 1;
>
> But at this point, don't we know we have a 3rd cell? We've only
> matched if we do, right? If "extra" is always 1, then this function is
> pretty much the same as the PCI and ISA versions after the flags
> comparison.
Right.
I will simplify this function in the next iteration.
>
> > + /*
> > + * Given address contains more than 2 cells.
> > + * The address high extra part must match the range extra part
> > + * and must be filtered-out from 64bit offset computation.
> > + */
> > + extra = na - 2;
> > + if (!of_addr_is_equal(addr, range, extra))
>
> A bit misleading as all you are doing is comparing the 3rd (top) cell.
Will simplify.
>
> > + return OF_BAD_ADDR;
> > +
> > + cp = of_read_number(range + extra, na - extra);
> > + s = of_read_number(range + na + pna, ns);
> > + da = of_read_number(addr + extra, na - extra);
> > + } else {
> > + cp = of_read_number(range, na);
> > + s = of_read_number(range + na + pna, ns);
> > + da = of_read_number(addr, na);
> > + }
> > + pr_debug("default flags map, extra=%d cp=%llx, s=%llx, da=%llx\n", extra, cp, s, da);
> > +
> > + if (da < cp || da >= (cp + s))
> > + return OF_BAD_ADDR;
> > + return da - cp;
> > +}
> > +
> > +static int of_bus_default_flags_translate(__be32 *addr, u64 offset, int na)
>
> Same as of_bus_pci_translate() and of_bus_isa_translate(). 3rd case
> gets to rename and consolidate.
>
> > +{
> > + /* Keep "flags" part in translated address */
> > + return of_bus_default_translate(addr + 1, offset, na - 1);
> > +}
I would keep of_bus_default_flags_translate() and use this one for PCI and ISA
translation.
Indeed, I think the term default_flags_translate makes sense in PCI and ISA as
> >
> > #ifdef CONFIG_PCI
> > static unsigned int of_bus_pci_get_flags(const __be32 *addr)
> > @@ -374,8 +426,8 @@ static struct of_bus of_busses[] = {
> > .addresses = "reg",
> > .match = of_bus_default_flags_match,
> > .count_cells = of_bus_default_count_cells,
> > - .map = of_bus_default_map,
> > - .translate = of_bus_default_translate,
> > + .map = of_bus_default_flags_map,
> > + .translate = of_bus_default_flags_translate,
> > .has_flags = true,
> > .get_flags = of_bus_default_flags_get_flags,
> > },
> > --
> > 2.41.0
> >
Thanks for your feedback.
Best regards,
Hervé
On Wed, Oct 04, 2023 at 11:07:01AM +0200, Herve Codina wrote:
> On Tue, 3 Oct 2023 16:12:25 -0500
> Rob Herring <[email protected]> wrote:
>
> > On Tue, Oct 3, 2023 at 1:53 AM Herve Codina <[email protected]> wrote:
> > >
> > > With the recent addition of of_pci_prop_ranges() in commit 407d1a51921e
> > > ("PCI: Create device tree node for bridge"), the ranges property can
> > > have a 3 cells child address, a 3 cells parent address and a 2 cells
> > > child size.
> >
> > Sigh. I'm starting to regret applying this for 6.6... You failed to Cc
> > the AMD folks too. Lizhi now added.
> >
> > What's different here from the test cases? The having 3 cells in
> > parent and child?
>
> Are you talking about of_unittest_pci_node()?
That and there's a non-PCI one.
> I so, only BAR0 is used and the DT overlay is
> fragment@0 {
> target-path="";
> __overlay__ {
> #address-cells = <3>;
> #size-cells = <2>;
> pci-ep-bus@0 {
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0x0 0x0 0x0 0x0 0x1000>;
> reg = <0 0 0 0 0>;
> unittest-pci@100 {
> compatible = "unittest-pci";
> reg = <0x100 0x200>;
> };
> };
> };
> };
>
> >
> > >
> > > A range item property for a PCI device is filled as follow:
> > > <BAR_nbr> 0 0 <phys.hi> <phys.mid> <phys.low> <BAR_sizeh> <BAR_sizel>
> > > <-- Child --> <-- Parent (PCI definition) --> <- BAR size (64bit) -->
> > >
> > > This allow to translate BAR addresses from the DT. For instance:
> > > pci@0,0 {
> > > #address-cells = <0x03>;
> > > #size-cells = <0x02>;
> > > device_type = "pci";
> > > compatible = "pci11ab,100\0pciclass,060400\0pciclass,0604";
> > > ranges = <0x82000000 0x00 0xe8000000
> > > 0x82000000 0x00 0xe8000000
> > > 0x00 0x4400000>;
> > > ...
> > > dev@0,0 {
> > > #address-cells = <0x03>;
> > > #size-cells = <0x02>;
> > > compatible = "pci1055,9660\0pciclass,020000\0pciclass,0200";
> > > /* Translations for BAR0 to BAR5 */
> > > ranges = <0x00 0x00 0x00 0x82010000 0x00 0xe8000000 0x00 0x2000000
> > > 0x01 0x00 0x00 0x82010000 0x00 0xea000000 0x00 0x1000000
> > > 0x02 0x00 0x00 0x82010000 0x00 0xeb000000 0x00 0x800000
> > > 0x03 0x00 0x00 0x82010000 0x00 0xeb800000 0x00 0x800000
> > > 0x04 0x00 0x00 0x82010000 0x00 0xec000000 0x00 0x20000
> > > 0x05 0x00 0x00 0x82010000 0x00 0xec020000 0x00 0x2000>;
> > > ...
> > > pci-ep-bus@0 {
> > > #address-cells = <0x01>;
> > > #size-cells = <0x01>;
> > > compatible = "simple-bus";
> > > /* Translate 0xe2000000 to BAR0 and 0xe0000000 to BAR1 */
> > > ranges = <0xe2000000 0x00 0x00 0x00 0x20000000
> > > 0xe0000000 0x01 0x00 0x00 0x1000000>;
> >
> > Why are you reusing a PCI bus address value for the child bus? I'm
> > wondering if this is some hackery because the child devices need PCI
> > addresses to work. What address does a device need for DMA for
> > example?
>
> I don't think I re-use a PCI bus address.
Okay, I guess they happen to be similar. It depends on the host bridge,
but often the PCI addresses are arbitrary. Often platforms just reuse
the CPU address, but really they are independent.
> In my device datasheet, 0xe2000000 to 0xe3ffffff are mapped to BAR0 and
> 0xe0000000 to 0xe0FFFFFF are mapped to BAR1.
> And so, all devices use this kind of addresses in their 'reg' property.
Okay, your size is off. For 0xe2000000, you have 0x2000_0000 rather than
0x0200_0000. (It would be good if this mistake triggered a warning)
>
> >
> > Also, I think each BAR should be a separate child. We need to
> > formalize this BAR addressing in a schema.
>
> I am not sure that we should describe the hardware with a tree based on
> BAR. On my system, some devices use two BARs.
> For instance, I have a 'microchip,lan966x-switch'
> https://elixir.bootlin.com/linux/v6.5/source/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
>
> This devices use two values (two reg set) for its reg property.
> On my system, this device is accessed through the PCI bus and one reg set
> should be accessed using BAR0 and the other set using BAR1.
Okay, if the h/w is like that, then I agree.
>
> Having a tree based on BARs will break this kind of devices.
>
> >
> > > ...
> > > };
> > > };
> > > };
> > >
> > > During the translation process, the "default-flags" map() function is
> > > used to select the matching item in the ranges table and determine the
> > > address offset from this matching item.
> > > This map() function simply calls of_read_number() and when address-size
> > > is greater than 2, the map() function skips the extra high address part
> > > (ie part over 64bit). This lead to a wrong matching item and a wrong
> > > offset computation.
> > > Also during the translation itself, the extra high part related to the
> > > parent address is not present in the translated address.
> > >
> > > Fix the "default-flags" map() and translate() in order to take into
> > > account the child extra high address part in map() and the parent extra
> > > high address part in translate() and so having a correct address
> > > translation for ranges patterns such as the one given in the example
> > > above.
> >
> > Please add a test case for this.
>
> Should I add it in the of_unittest_pci_node() or create a new unittest
> dedicated to this translation test?
Extending the existing tests is fine. If you can make the non-PCI one
fail, that would be better as it doesn't depend on the QEMU PCI test
device.
Rob