Add a mechanism to disable on chip PCI devices by DT. Typically, when there
are pins shareable between the platform device and the on chip PCI device,
if the PCI device is not preferred, add `status = "disabled"` property to
this PCI device DT node.
For example, on LS2K1000, GMAC1 (on chip PCI device) and GPIO (platform
device, not PCI device) 14 share the same pin. If GMAC1 is not preferred,
add `status = "disabled"` property in GMAC1 DT node.
Signed-off-by: Liu Peibao <[email protected]>
---
V5 -> V6: 1. rewrite the commit log to make things clear.
2. replace "unavailable" as "disabled" in patch subject.
V4 -> V5: clear the issue we are facing in commit log.
V3 -> V4: 1. get rid of the masklist and search the status property
directly.
2. check the status property only when accessing the vendor ID.
V2 -> V3: 1. use list_for_each_entry() for more clearly.
2. fix wrong use of sizeof().
V1 -> V2: use existing property "status" instead of adding new property.
drivers/pci/controller/pci-loongson.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
index 05c50408f13b..efca0b3b5a29 100644
--- a/drivers/pci/controller/pci-loongson.c
+++ b/drivers/pci/controller/pci-loongson.c
@@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus,
return NULL;
}
+#ifdef CONFIG_OF
+ /* Don't access disabled devices. */
+ if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) {
+ struct device_node *dn;
+
+ dn = of_pci_find_child_device(bus->dev.of_node, devfn);
+ if (dn && !of_device_is_available(dn))
+ return NULL;
+ }
+#endif
+
/* CFG0 can only access standard space */
if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
return cfg0_map(priv, bus, devfn, where);
--
2.20.1
在 2022/11/17 10:09, Liu Peibao 写道:
> Add a mechanism to disable on chip PCI devices by DT. Typically, when there
> are pins shareable between the platform device and the on chip PCI device,
> if the PCI device is not preferred, add `status = "disabled"` property to
> this PCI device DT node.
>
> For example, on LS2K1000, GMAC1 (on chip PCI device) and GPIO (platform
> device, not PCI device) 14 share the same pin. If GMAC1 is not preferred,
> add `status = "disabled"` property in GMAC1 DT node.
>
> Signed-off-by: Liu Peibao <[email protected]>
Tested-by: Binbin Zhou <[email protected]>
> ---
> V5 -> V6: 1. rewrite the commit log to make things clear.
> 2. replace "unavailable" as "disabled" in patch subject.
> V4 -> V5: clear the issue we are facing in commit log.
> V3 -> V4: 1. get rid of the masklist and search the status property
> directly.
> 2. check the status property only when accessing the vendor ID.
> V2 -> V3: 1. use list_for_each_entry() for more clearly.
> 2. fix wrong use of sizeof().
> V1 -> V2: use existing property "status" instead of adding new property.
>
> drivers/pci/controller/pci-loongson.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
> index 05c50408f13b..efca0b3b5a29 100644
> --- a/drivers/pci/controller/pci-loongson.c
> +++ b/drivers/pci/controller/pci-loongson.c
> @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus,
> return NULL;
> }
>
> +#ifdef CONFIG_OF
> + /* Don't access disabled devices. */
> + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) {
> + struct device_node *dn;
> +
> + dn = of_pci_find_child_device(bus->dev.of_node, devfn);
> + if (dn && !of_device_is_available(dn))
> + return NULL;
> + }
> +#endif
> +
> /* CFG0 can only access standard space */
> if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
> return cfg0_map(priv, bus, devfn, where);
On Wed, Feb 8, 2023 at 11:00 AM Binbin Zhou <[email protected]> wrote:
>
>
> 在 2022/11/17 10:09, Liu Peibao 写道:
> > Add a mechanism to disable on chip PCI devices by DT. Typically, when there
> > are pins shareable between the platform device and the on chip PCI device,
> > if the PCI device is not preferred, add `status = "disabled"` property to
> > this PCI device DT node.
> >
> > For example, on LS2K1000, GMAC1 (on chip PCI device) and GPIO (platform
> > device, not PCI device) 14 share the same pin. If GMAC1 is not preferred,
> > add `status = "disabled"` property in GMAC1 DT node.
> >
> > Signed-off-by: Liu Peibao <[email protected]>
> Tested-by: Binbin Zhou <[email protected]>
Acked-by: Huacai Chen <[email protected]>
> > ---
> > V5 -> V6: 1. rewrite the commit log to make things clear.
> > 2. replace "unavailable" as "disabled" in patch subject.
> > V4 -> V5: clear the issue we are facing in commit log.
> > V3 -> V4: 1. get rid of the masklist and search the status property
> > directly.
> > 2. check the status property only when accessing the vendor ID.
> > V2 -> V3: 1. use list_for_each_entry() for more clearly.
> > 2. fix wrong use of sizeof().
> > V1 -> V2: use existing property "status" instead of adding new property.
> >
> > drivers/pci/controller/pci-loongson.c | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
> > index 05c50408f13b..efca0b3b5a29 100644
> > --- a/drivers/pci/controller/pci-loongson.c
> > +++ b/drivers/pci/controller/pci-loongson.c
> > @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus,
> > return NULL;
> > }
> >
> > +#ifdef CONFIG_OF
> > + /* Don't access disabled devices. */
> > + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) {
> > + struct device_node *dn;
> > +
> > + dn = of_pci_find_child_device(bus->dev.of_node, devfn);
> > + if (dn && !of_device_is_available(dn))
> > + return NULL;
> > + }
> > +#endif
> > +
> > /* CFG0 can only access standard space */
> > if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
> > return cfg0_map(priv, bus, devfn, where);
>
On Wed, Nov 16, 2022 at 8:09 PM Liu Peibao <[email protected]> wrote:
>
> Add a mechanism to disable on chip PCI devices by DT. Typically, when there
> are pins shareable between the platform device and the on chip PCI device,
> if the PCI device is not preferred, add `status = "disabled"` property to
> this PCI device DT node.
>
> For example, on LS2K1000, GMAC1 (on chip PCI device) and GPIO (platform
> device, not PCI device) 14 share the same pin. If GMAC1 is not preferred,
> add `status = "disabled"` property in GMAC1 DT node.
>
> Signed-off-by: Liu Peibao <[email protected]>
> ---
> V5 -> V6: 1. rewrite the commit log to make things clear.
> 2. replace "unavailable" as "disabled" in patch subject.
> V4 -> V5: clear the issue we are facing in commit log.
> V3 -> V4: 1. get rid of the masklist and search the status property
> directly.
> 2. check the status property only when accessing the vendor ID.
> V2 -> V3: 1. use list_for_each_entry() for more clearly.
> 2. fix wrong use of sizeof().
> V1 -> V2: use existing property "status" instead of adding new property.
>
> drivers/pci/controller/pci-loongson.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
> index 05c50408f13b..efca0b3b5a29 100644
> --- a/drivers/pci/controller/pci-loongson.c
> +++ b/drivers/pci/controller/pci-loongson.c
> @@ -194,6 +194,17 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus,
> return NULL;
> }
>
> +#ifdef CONFIG_OF
> + /* Don't access disabled devices. */
> + if (pci_is_root_bus(bus) && where == PCI_VENDOR_ID) {
> + struct device_node *dn;
> +
> + dn = of_pci_find_child_device(bus->dev.of_node, devfn);
> + if (dn && !of_device_is_available(dn))
> + return NULL;
> + }
> +#endif
This should not be controller specific as a disabled node should be
honored on any platform. It also makes assumptions about how the PCI
scanning code works that PCI_VENDOR_ID read failing is enough to stop
scanning. Can you please test this patch I just sent[1].
Rob
[1] https://lore.kernel.org/all/[email protected]/