Hi all,
After merging the devicetree tree, today's linux-next build (arm
multi_v7_defconfig) produced this warning:
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
Presumably exposed by commit
1ee7943c3343 ("kbuild: Enable dtc 'pci_device_reg' warning by default")
--
Cheers,
Stephen Rothwell
On Mon, Aug 23, 2021 at 10:18 PM Stephen Rothwell <[email protected]> wrote:
>
> Hi all,
>
> After merging the devicetree tree, today's linux-next build (arm
> multi_v7_defconfig) produced this warning:
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
>
> Presumably exposed by commit
>
> 1ee7943c3343 ("kbuild: Enable dtc 'pci_device_reg' warning by default")
Yep, that's expected. There's a couple on arm64 builds too.
Rob
Hi Rob,
On Tue, 24 Aug 2021 07:35:37 -0500 Rob Herring <[email protected]> wrote:
>
> On Mon, Aug 23, 2021 at 10:18 PM Stephen Rothwell <[email protected]> wrote:
> >
> > Hi all,
> >
> > After merging the devicetree tree, today's linux-next build (arm
> > multi_v7_defconfig) produced this warning:
> >
> > arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
> > arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
> >
> > Presumably exposed by commit
> >
> > 1ee7943c3343 ("kbuild: Enable dtc 'pci_device_reg' warning by default")
>
> Yep, that's expected. There's a couple on arm64 builds too.
These warnings are now in Linus' tree :-(
--
Cheers,
Stephen Rothwell
On Thu, Sep 2, 2021 at 5:34 PM Stephen Rothwell <[email protected]> wrote:
>
> Hi Rob,
>
> On Tue, 24 Aug 2021 07:35:37 -0500 Rob Herring <[email protected]> wrote:
> >
> > On Mon, Aug 23, 2021 at 10:18 PM Stephen Rothwell <[email protected]> wrote:
> > >
> > > Hi all,
> > >
> > > After merging the devicetree tree, today's linux-next build (arm
> > > multi_v7_defconfig) produced this warning:
> > >
> > > arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
> > > arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
> > >
> > > Presumably exposed by commit
> > >
> > > 1ee7943c3343 ("kbuild: Enable dtc 'pci_device_reg' warning by default")
> >
> > Yep, that's expected. There's a couple on arm64 builds too.
>
> These warnings are now in Linus' tree :-(
There's some pending patches for them now[1]. The SoC tree needs to
pick them up.
Rob
[1] https://lore.kernel.org/all/[email protected]/