Add coresight trace components (ETM, ETF, ETB and Funnel).
┌───────┐ ┌───────┐ ┌───────┐
│ CPU0 ├─►│ ETM0 ├─►│ │
└───────┘ └───────┘ │ │
│ │
┌───────┐ ┌───────┐ │ ATP │
│ CPU1 ├─►│ ETM1 ├─►│ │
└───────┘ └───────┘ │ │
│ FUNNEL│
┌───────┐ ┌───────┐ │ │
│ CPU2 ├─►│ ETM2 ├─►│ │
└───────┘ └───────┘ │ │ ┌─────┐ ┌─────┐
│ │ │ │ │ │
┌───────┐ ┌───────┐ │ │ │ M7 │ │ DSP │
│ CPU3 ├─►│ ETM3 ├─►│ │ │ │ │ │
└───────┘ └───────┘ └───┬───┘ └──┬──┘ └──┬──┘ AXI
│ │ │ ▲
▼ ▼ ▼ │
┌───────────────────────────┐ ┌─────┐ ┌─┴──┐
│ ATP FUNNEL ├──►│ETF ├─► │ETR │
└───────────────────────────┘ └─────┘ └────┘
Signed-off-by: Frank Li <[email protected]>
---
Change from v1 to v2
- add new line between nodes
- add new line between properties and child node
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 204 ++++++++++++++++++++++
1 file changed, 204 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index a19224fe1a6a..1a25710c3a90 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -304,6 +304,210 @@ soc: soc@0 {
nvmem-cells = <&imx8mp_uid>;
nvmem-cell-names = "soc_unique_id";
+ etm0: etm@28440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x28440000 0x10000>;
+ arm,primecell-periphid = <0xbb95d>;
+ cpu = <&A53_0>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ etm1: etm@28540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x28540000 0x10000>;
+ arm,primecell-periphid = <0xbb95d>;
+ cpu = <&A53_1>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
+ };
+ };
+ };
+
+ etm2: etm@28640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x28640000 0x10000>;
+ arm,primecell-periphid = <0xbb95d>;
+ cpu = <&A53_2>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm2_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port2>;
+ };
+ };
+ };
+ };
+
+ etm3: etm@28740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x28740000 0x10000>;
+ arm,primecell-periphid = <0xbb95d>;
+ cpu = <&A53_3>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm3_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port3>;
+ };
+ };
+ };
+ };
+
+ funnel {
+ /*
+ * non-configurable funnel don't show up on the AMBA
+ * bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-static-funnel";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ca_funnel_in_port0: endpoint {
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ca_funnel_in_port1: endpoint {
+ remote-endpoint = <&etm1_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ca_funnel_in_port2: endpoint {
+ remote-endpoint = <&etm2_out_port>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ca_funnel_in_port3: endpoint {
+ remote-endpoint = <&etm3_out_port>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ ca_funnel_out_port0: endpoint {
+ remote-endpoint = <&hugo_funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@28c03000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x28c03000 0x1000>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hugo_funnel_in_port0: endpoint {
+ remote-endpoint = <&ca_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hugo_funnel_in_port1: endpoint {
+ /* M7 input */
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ hugo_funnel_in_port2: endpoint {
+ /* DSP input */
+ };
+ };
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ port {
+ hugo_funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+ };
+ };
+
+ etf@28c04000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x28c04000 0x1000>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ etf_in_port: endpoint {
+ remote-endpoint = <&hugo_funnel_out_port0>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etf_out_port: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+ };
+ };
+
+ etr@28c06000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x28c06000 0x1000>;
+ clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
--
2.34.1
On Mon, May 15, 2023 at 11:01:49AM -0400, Frank Li wrote:
> Add coresight trace components (ETM, ETF, ETB and Funnel).
>
> ┌───────┐ ┌───────┐ ┌───────┐
> │ CPU0 ├─►│ ETM0 ├─►│ │
> └───────┘ └───────┘ │ │
> │ │
> ┌───────┐ ┌───────┐ │ ATP │
> │ CPU1 ├─►│ ETM1 ├─►│ │
> └───────┘ └───────┘ │ │
> │ FUNNEL│
> ┌───────┐ ┌───────┐ │ │
> │ CPU2 ├─►│ ETM2 ├─►│ │
> └───────┘ └───────┘ │ │ ┌─────┐ ┌─────┐
> │ │ │ │ │ │
> ┌───────┐ ┌───────┐ │ │ │ M7 │ │ DSP │
> │ CPU3 ├─►│ ETM3 ├─►│ │ │ │ │ │
> └───────┘ └───────┘ └───┬───┘ └──┬──┘ └──┬──┘ AXI
> │ │ │ ▲
> ▼ ▼ ▼ │
> ┌───────────────────────────┐ ┌─────┐ ┌─┴──┐
> │ ATP FUNNEL ├──►│ETF ├─► │ETR │
> └───────────────────────────┘ └─────┘ └────┘
>
> Signed-off-by: Frank Li <[email protected]>
Applied, thanks!
On Mon, May 15, 2023 at 9:02 AM Frank Li <[email protected]> wrote:
>
> Add coresight trace components (ETM, ETF, ETB and Funnel).
>
> ┌───────┐ ┌───────┐ ┌───────┐
> │ CPU0 ├─►│ ETM0 ├─►│ │
> └───────┘ └───────┘ │ │
> │ │
> ┌───────┐ ┌───────┐ │ ATP │
> │ CPU1 ├─►│ ETM1 ├─►│ │
> └───────┘ └───────┘ │ │
> │ FUNNEL│
> ┌───────┐ ┌───────┐ │ │
> │ CPU2 ├─►│ ETM2 ├─►│ │
> └───────┘ └───────┘ │ │ ┌─────┐ ┌─────┐
> │ │ │ │ │ │
> ┌───────┐ ┌───────┐ │ │ │ M7 │ │ DSP │
> │ CPU3 ├─►│ ETM3 ├─►│ │ │ │ │ │
> └───────┘ └───────┘ └───┬───┘ └──┬──┘ └──┬──┘ AXI
> │ │ │ ▲
> ▼ ▼ ▼ │
> ┌───────────────────────────┐ ┌─────┐ ┌─┴──┐
> │ ATP FUNNEL ├──►│ETF ├─► │ETR │
> └───────────────────────────┘ └─────┘ └────┘
>
> Signed-off-by: Frank Li <[email protected]>
> ---
> Change from v1 to v2
> - add new line between nodes
> - add new line between properties and child node
>
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 204 ++++++++++++++++++++++
> 1 file changed, 204 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index a19224fe1a6a..1a25710c3a90 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -304,6 +304,210 @@ soc: soc@0 {
> nvmem-cells = <&imx8mp_uid>;
> nvmem-cell-names = "soc_unique_id";
>
> + etm0: etm@28440000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x28440000 0x10000>;
> + arm,primecell-periphid = <0xbb95d>;
> + cpu = <&A53_0>;
> + clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + etm0_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port0>;
> + };
> + };
> + };
> + };
> +
> + etm1: etm@28540000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x28540000 0x10000>;
> + arm,primecell-periphid = <0xbb95d>;
> + cpu = <&A53_1>;
> + clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + etm1_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port1>;
> + };
> + };
> + };
> + };
> +
> + etm2: etm@28640000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x28640000 0x10000>;
> + arm,primecell-periphid = <0xbb95d>;
> + cpu = <&A53_2>;
> + clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + etm2_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port2>;
> + };
> + };
> + };
> + };
> +
> + etm3: etm@28740000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x28740000 0x10000>;
> + arm,primecell-periphid = <0xbb95d>;
> + cpu = <&A53_3>;
> + clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
> + clock-names = "apb_pclk";
> +
> + out-ports {
> + port {
> + etm3_out_port: endpoint {
> + remote-endpoint = <&ca_funnel_in_port3>;
> + };
> + };
> + };
> + };
> +
> + funnel {
> + /*
> + * non-configurable funnel don't show up on the AMBA
> + * bus. As such no need to add "arm,primecell".
> + */
> + compatible = "arm,coresight-static-funnel";
This device has no registers so it should not be under the bus node.
This is pointed out by the dtschema checks. Please don't add new ones.
Rob