The qcom-qusb2-phy.txt file was converted and renamed to yaml.
Update cross-reference accordingly.
Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index cb695aa3fba4..fbdd01756752 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
Example device nodes:
--
2.25.2
Quoting Mauro Carvalho Chehab (2020-04-08 08:46:20)
> The qcom-qusb2-phy.txt file was converted and renamed to yaml.
> Update cross-reference accordingly.
>
> Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml")
> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> ---
Reviewed-by: Stephen Boyd <[email protected]>
> Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> index cb695aa3fba4..fbdd01756752 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> @@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
> the node is not important. The content of the node is defined in dwc3.txt.
>
> Phy documentation is provided in the following places:
> -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
> -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
> +Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
> +Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
It should probably be bindings/phy/<blah> so that when the bindings are
taken out of the kernel context they'll still make sense, but that can
be done later.
Mauro Carvalho Chehab <[email protected]> writes:
> The qcom-qusb2-phy.txt file was converted and renamed to yaml.
> Update cross-reference accordingly.
>
> Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml")
> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> ---
> Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> index cb695aa3fba4..fbdd01756752 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> @@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
> the node is not important. The content of the node is defined in dwc3.txt.
>
> Phy documentation is provided in the following places:
> -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
> -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
> +Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
> +Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
>
> Example device nodes:
Should I take this or will it go via e.g. trivial?
In any case:
Acked-by: Felipe Balbi <[email protected]>
--
balbi
On Fri, Apr 17, 2020 at 4:27 AM Felipe Balbi <[email protected]> wrote:
>
> Mauro Carvalho Chehab <[email protected]> writes:
>
> > The qcom-qusb2-phy.txt file was converted and renamed to yaml.
> > Update cross-reference accordingly.
> >
> > Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml")
> > Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> > ---
> > Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> > index cb695aa3fba4..fbdd01756752 100644
> > --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> > +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> > @@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
> > the node is not important. The content of the node is defined in dwc3.txt.
> >
> > Phy documentation is provided in the following places:
> > -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
> > -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
> > +Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY
> > +Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
> >
> > Example device nodes:
>
> Should I take this or will it go via e.g. trivial?
I already queued up v2 of this.
>
> In any case:
>
> Acked-by: Felipe Balbi <[email protected]>
>
> --
> balbi