Hi there -
finally I prepared a patch for the famous ftdi_sio usb serial driver.
Adding two Tagsys RFID readers I am using.
After having asked Bill Ryder he suggested adressing the
linux-usb-devel mailing list. (what?)
Sorry for the mess below - I am not doing this frequently - being
rather a leecher over the last 20 years:-)
diff -uprN linux-source-3.2.0/drivers/usb/serial/ftdi_sio.c
linux-source-3.2.0+tagsysRFID/drivers/usb/serial/ftdi_sio.c
--- linux-source-3.2.0/drivers/usb/serial/ftdi_sio.c 2013-12-03
18:40:26.000000000 +0100
+++ linux-source-3.2.0+tagsysRFID/drivers/usb/serial/ftdi_sio.c
2014-02-01 16:32:40.146698791 +0100
@@ -202,6 +202,8 @@ static struct usb_device_id id_table_com
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
diff -uprN linux-source-3.2.0/drivers/usb/serial/ftdi_sio_ids.h
linux-source-3.2.0+tagsysRFID/drivers/usb/serial/ftdi_sio_ids.h
--- linux-source-3.2.0/drivers/usb/serial/ftdi_sio_ids.h
2013-12-03 18:40:26.000000000 +0100
+++ linux-source-3.2.0+tagsysRFID/drivers/usb/serial/ftdi_sio_ids.h
2014-02-01 16:33:50.239338227 +0100
@@ -363,6 +363,13 @@
/* Sprog II (Andrew Crosland's SprogII DCC interface) */
#define FTDI_SPROG_II 0xF0C8
+/*
+ * Tagsys RFID Readers
+ * survey (two of them) by Ulrich Hahn
+ */
+#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/
+#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/
+
/* an infrared receiver for user access control with IR tags */
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
Signed-off-by: Ulrich Hahn <[email protected]>
best regards
Ulrich Hahn