2020-10-18 03:47:42

by Vaishnav M A

[permalink] [raw]
Subject: [PATCH v2] iio: light: tsl2563 change of_property_read to device_property_read

replace the of_property_read_u32 for reading the amstaos,cover-comp-gain
property with device_property_read_u32,allows the driver to
get the properties information using the more generic device_property_*
helpers and opens the possibility of passing the properties during
platform instantiation of the device by a suitably populated
struct property_entry.

Signed-off-by: Vaishnav M A <[email protected]>
---
v2:
- fix commit message
drivers/iio/light/tsl2563.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index abc8d7db8dc1..1f1b8b7cefa4 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -703,7 +703,6 @@ static int tsl2563_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
struct tsl2563_chip *chip;
struct tsl2563_platform_data *pdata = client->dev.platform_data;
- struct device_node *np = client->dev.of_node;
int err = 0;
u8 id = 0;

@@ -738,13 +737,14 @@ static int tsl2563_probe(struct i2c_client *client,
chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);

- if (pdata)
+ if (pdata) {
chip->cover_comp_gain = pdata->cover_comp_gain;
- else if (np)
- of_property_read_u32(np, "amstaos,cover-comp-gain",
- &chip->cover_comp_gain);
- else
- chip->cover_comp_gain = 1;
+ } else {
+ err = device_property_read_u32(&client->dev, "amstaos,cover-comp-gain",
+ &chip->cover_comp_gain);
+ if (err)
+ chip->cover_comp_gain = 1;
+ }

dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
indio_dev->name = client->name;
--
2.25.1


2020-10-18 12:29:40

by Jonathan Cameron

[permalink] [raw]
Subject: Re: [PATCH v2] iio: light: tsl2563 change of_property_read to device_property_read

On Sun, 18 Oct 2020 08:55:43 +0530
Vaishnav M A <[email protected]> wrote:

> replace the of_property_read_u32 for reading the amstaos,cover-comp-gain
> property with device_property_read_u32,allows the driver to
> get the properties information using the more generic device_property_*
> helpers and opens the possibility of passing the properties during
> platform instantiation of the device by a suitably populated
> struct property_entry.
>
> Signed-off-by: Vaishnav M A <[email protected]>
See review for v1. Most of it still applies, I just hadn't realised
you'd sent a v2. As I mentioned on one of your other patches, if
you send a v2 without any comments on v1, please reply yourself to say
you have done so. Otherwise, people may well review the wrong version.

Thanks,

Jonathan

> ---
> v2:
> - fix commit message
> drivers/iio/light/tsl2563.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
> index abc8d7db8dc1..1f1b8b7cefa4 100644
> --- a/drivers/iio/light/tsl2563.c
> +++ b/drivers/iio/light/tsl2563.c
> @@ -703,7 +703,6 @@ static int tsl2563_probe(struct i2c_client *client,
> struct iio_dev *indio_dev;
> struct tsl2563_chip *chip;
> struct tsl2563_platform_data *pdata = client->dev.platform_data;
> - struct device_node *np = client->dev.of_node;
> int err = 0;
> u8 id = 0;
>
> @@ -738,13 +737,14 @@ static int tsl2563_probe(struct i2c_client *client,
> chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
> chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
>
> - if (pdata)
> + if (pdata) {
> chip->cover_comp_gain = pdata->cover_comp_gain;
> - else if (np)
> - of_property_read_u32(np, "amstaos,cover-comp-gain",
> - &chip->cover_comp_gain);
> - else
> - chip->cover_comp_gain = 1;
> + } else {
> + err = device_property_read_u32(&client->dev, "amstaos,cover-comp-gain",
> + &chip->cover_comp_gain);
> + if (err)
> + chip->cover_comp_gain = 1;
> + }
>
> dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
> indio_dev->name = client->name;

2020-10-18 12:31:42

by Jonathan Cameron

[permalink] [raw]
Subject: Re: [PATCH v2] iio: light: tsl2563 change of_property_read to device_property_read

On Sun, 18 Oct 2020 08:55:43 +0530
Vaishnav M A <[email protected]> wrote:

> replace the of_property_read_u32 for reading the amstaos,cover-comp-gain
> property with device_property_read_u32,allows the driver to
> get the properties information using the more generic device_property_*
> helpers and opens the possibility of passing the properties during
> platform instantiation of the device by a suitably populated
> struct property_entry.
>
> Signed-off-by: Vaishnav M A <[email protected]>
Please tidy up that description in a similar fashion to I've suggested in
other reviews. Code looks fine.

On another day I might have just fixed that description whilst applying but
we have lots of time at this point in the cycle, hence I'm bouncing
them back to you ;)

Thanks,

Jonathan

> ---
> v2:
> - fix commit message
> drivers/iio/light/tsl2563.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
> index abc8d7db8dc1..1f1b8b7cefa4 100644
> --- a/drivers/iio/light/tsl2563.c
> +++ b/drivers/iio/light/tsl2563.c
> @@ -703,7 +703,6 @@ static int tsl2563_probe(struct i2c_client *client,
> struct iio_dev *indio_dev;
> struct tsl2563_chip *chip;
> struct tsl2563_platform_data *pdata = client->dev.platform_data;
> - struct device_node *np = client->dev.of_node;
> int err = 0;
> u8 id = 0;
>
> @@ -738,13 +737,14 @@ static int tsl2563_probe(struct i2c_client *client,
> chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
> chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
>
> - if (pdata)
> + if (pdata) {
> chip->cover_comp_gain = pdata->cover_comp_gain;
> - else if (np)
> - of_property_read_u32(np, "amstaos,cover-comp-gain",
> - &chip->cover_comp_gain);
> - else
> - chip->cover_comp_gain = 1;
> + } else {
> + err = device_property_read_u32(&client->dev, "amstaos,cover-comp-gain",
> + &chip->cover_comp_gain);
> + if (err)
> + chip->cover_comp_gain = 1;
> + }
>
> dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
> indio_dev->name = client->name;

2020-10-18 17:03:34

by Vaishnav M A

[permalink] [raw]
Subject: Re: [PATCH v2] iio: light: tsl2563 change of_property_read to device_property_read

On Sun, Oct 18, 2020 at 5:05 PM Jonathan Cameron <[email protected]> wrote:
>
> On Sun, 18 Oct 2020 08:55:43 +0530
> Vaishnav M A <[email protected]> wrote:
>
> > replace the of_property_read_u32 for reading the amstaos,cover-comp-gain
> > property with device_property_read_u32,allows the driver to
> > get the properties information using the more generic device_property_*
> > helpers and opens the possibility of passing the properties during
> > platform instantiation of the device by a suitably populated
> > struct property_entry.
> >
> > Signed-off-by: Vaishnav M A <[email protected]>
> Please tidy up that description in a similar fashion to I've suggested in
> other reviews. Code looks fine.
>
> On another day I might have just fixed that description whilst applying but
> we have lots of time at this point in the cycle, hence I'm bouncing
> them back to you ;)
>
> Thanks,
>
> Jonathan
>
Thank you Jonathan for the review, sorry about missing to notify after
sending the v2 patch(and repeating the same mistake a few times), will
make sure that it won't happen again. I have sent a v3 patch updated with
all the suggested changes : https://lore.kernel.org/patchwork/patch/1322194/

Thanks and Regards,
Vaishnav
> > ---
> > v2:
> > - fix commit message
> > drivers/iio/light/tsl2563.c | 14 +++++++-------
> > 1 file changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
> > index abc8d7db8dc1..1f1b8b7cefa4 100644
> > --- a/drivers/iio/light/tsl2563.c
> > +++ b/drivers/iio/light/tsl2563.c
> > @@ -703,7 +703,6 @@ static int tsl2563_probe(struct i2c_client *client,
> > struct iio_dev *indio_dev;
> > struct tsl2563_chip *chip;
> > struct tsl2563_platform_data *pdata = client->dev.platform_data;
> > - struct device_node *np = client->dev.of_node;
> > int err = 0;
> > u8 id = 0;
> >
> > @@ -738,13 +737,14 @@ static int tsl2563_probe(struct i2c_client *client,
> > chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
> > chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
> >
> > - if (pdata)
> > + if (pdata) {
> > chip->cover_comp_gain = pdata->cover_comp_gain;
> > - else if (np)
> > - of_property_read_u32(np, "amstaos,cover-comp-gain",
> > - &chip->cover_comp_gain);
> > - else
> > - chip->cover_comp_gain = 1;
> > + } else {
> > + err = device_property_read_u32(&client->dev, "amstaos,cover-comp-gain",
> > + &chip->cover_comp_gain);
> > + if (err)
> > + chip->cover_comp_gain = 1;
> > + }
> >
> > dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
> > indio_dev->name = client->name;
>

2020-10-19 19:55:52

by Vaishnav M A

[permalink] [raw]
Subject: Re: [PATCH v2] iio: light: tsl2563 change of_property_read to device_property_read

On Sun, Oct 18, 2020 at 8:14 PM Vaishnav M A <[email protected]> wrote:
>
> On Sun, Oct 18, 2020 at 5:05 PM Jonathan Cameron <[email protected]> wrote:
> >
> > On Sun, 18 Oct 2020 08:55:43 +0530
> > Vaishnav M A <[email protected]> wrote:
> >
> > > replace the of_property_read_u32 for reading the amstaos,cover-comp-gain
> > > property with device_property_read_u32,allows the driver to
> > > get the properties information using the more generic device_property_*
> > > helpers and opens the possibility of passing the properties during
> > > platform instantiation of the device by a suitably populated
> > > struct property_entry.
> > >
> > > Signed-off-by: Vaishnav M A <[email protected]>
> > Please tidy up that description in a similar fashion to I've suggested in
> > other reviews. Code looks fine.
> >
> > On another day I might have just fixed that description whilst applying but
> > we have lots of time at this point in the cycle, hence I'm bouncing
> > them back to you ;)
> >
> > Thanks,
> >
> > Jonathan
> >
> Thank you Jonathan for the review, sorry about missing to notify after
> sending the v2 patch(and repeating the same mistake a few times), will
> make sure that it won't happen again. I have sent a v3 patch updated with
> all the suggested changes : https://lore.kernel.org/patchwork/patch/1322194/
>
> Thanks and Regards,
> Vaishnav
Updated v4 patch submitted considering comments from Andy Shevchenko
on a different patch to refer to the functions like function() and updated the
commit title to a shorter one, similar to one used for similar changes
within the subsystem, like in 00fa493b9989
("iio:proximity:as3935: Drop of_match_ptr and use generic fw accessors")
https://lore.kernel.org/patchwork/patch/1322221/
> > > ---
> > > v2:
> > > - fix commit message
> > > drivers/iio/light/tsl2563.c | 14 +++++++-------
> > > 1 file changed, 7 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
> > > index abc8d7db8dc1..1f1b8b7cefa4 100644
> > > --- a/drivers/iio/light/tsl2563.c
> > > +++ b/drivers/iio/light/tsl2563.c
> > > @@ -703,7 +703,6 @@ static int tsl2563_probe(struct i2c_client *client,
> > > struct iio_dev *indio_dev;
> > > struct tsl2563_chip *chip;
> > > struct tsl2563_platform_data *pdata = client->dev.platform_data;
> > > - struct device_node *np = client->dev.of_node;
> > > int err = 0;
> > > u8 id = 0;
> > >
> > > @@ -738,13 +737,14 @@ static int tsl2563_probe(struct i2c_client *client,
> > > chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
> > > chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
> > >
> > > - if (pdata)
> > > + if (pdata) {
> > > chip->cover_comp_gain = pdata->cover_comp_gain;
> > > - else if (np)
> > > - of_property_read_u32(np, "amstaos,cover-comp-gain",
> > > - &chip->cover_comp_gain);
> > > - else
> > > - chip->cover_comp_gain = 1;
> > > + } else {
> > > + err = device_property_read_u32(&client->dev, "amstaos,cover-comp-gain",
> > > + &chip->cover_comp_gain);
> > > + if (err)
> > > + chip->cover_comp_gain = 1;
> > > + }
> > >
> > > dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
> > > indio_dev->name = client->name;
> >