/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy. However /proc/modules
also might change due to reference counts changing even though that
does not make any difference. Any modules loaded or unloaded should be
visible in changes to kallsyms, so it is not necessary to check
/proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
Reported-by: Daniel Dao <[email protected]>
Fixes: fc1b691d7651 ("perf buildid-cache: Add ability to add kcore to the cache")
Signed-off-by: Adrian Hunter <[email protected]>
---
tools/perf/util/symbol-elf.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 75bec32d4f57..647b7dff8ef3 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -2102,8 +2102,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,
* unusual. One significant peculiarity is that the mapping (start -> pgoff)
* is not the same for the kernel map and the modules map. That happens because
* the data is copied adjacently whereas the original kcore has gaps. Finally,
- * kallsyms and modules files are compared with their copies to check that
- * modules have not been loaded or unloaded while the copies were taking place.
+ * kallsyms file is compared with its copy to check that modules have not been
+ * loaded or unloaded while the copies were taking place.
*
* Return: %0 on success, %-1 on failure.
*/
@@ -2166,9 +2166,6 @@ int kcore_copy(const char *from_dir, const char *to_dir)
goto out_extract_close;
}
- if (kcore_copy__compare_file(from_dir, to_dir, "modules"))
- goto out_extract_close;
-
if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms"))
goto out_extract_close;
--
2.25.1
On Wed, Sep 14, 2022 at 1:24 PM Adrian Hunter <[email protected]> wrote:
>
> /proc/kallsyms and /proc/modules are compared before and after the copy
> in order to ensure no changes during the copy. However /proc/modules
> also might change due to reference counts changing even though that
> does not make any difference. Any modules loaded or unloaded should be
> visible in changes to kallsyms, so it is not necessary to check
> /proc/modules also anyway.
>
> Remove the comparison checking that /proc/modules is unchanged.
>
> Reported-by: Daniel Dao <[email protected]>
> Fixes: fc1b691d7651 ("perf buildid-cache: Add ability to add kcore to the cache")
> Signed-off-by: Adrian Hunter <[email protected]>
> ---
> tools/perf/util/symbol-elf.c | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
> index 75bec32d4f57..647b7dff8ef3 100644
> --- a/tools/perf/util/symbol-elf.c
> +++ b/tools/perf/util/symbol-elf.c
> @@ -2102,8 +2102,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,
> * unusual. One significant peculiarity is that the mapping (start -> pgoff)
> * is not the same for the kernel map and the modules map. That happens because
> * the data is copied adjacently whereas the original kcore has gaps. Finally,
> - * kallsyms and modules files are compared with their copies to check that
> - * modules have not been loaded or unloaded while the copies were taking place.
> + * kallsyms file is compared with its copy to check that modules have not been
> + * loaded or unloaded while the copies were taking place.
> *
> * Return: %0 on success, %-1 on failure.
> */
> @@ -2166,9 +2166,6 @@ int kcore_copy(const char *from_dir, const char *to_dir)
> goto out_extract_close;
> }
>
> - if (kcore_copy__compare_file(from_dir, to_dir, "modules"))
> - goto out_extract_close;
> -
> if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms"))
> goto out_extract_close;
>
> --
> 2.25.1
>
Thanks Adrian,
Tested-by: Daniel Dao <[email protected]>
On Wed, Sep 14, 2022 at 5:24 AM Adrian Hunter <[email protected]> wrote:
>
> /proc/kallsyms and /proc/modules are compared before and after the copy
> in order to ensure no changes during the copy. However /proc/modules
> also might change due to reference counts changing even though that
> does not make any difference. Any modules loaded or unloaded should be
> visible in changes to kallsyms, so it is not necessary to check
> /proc/modules also anyway.
>
> Remove the comparison checking that /proc/modules is unchanged.
>
> Reported-by: Daniel Dao <[email protected]>
> Fixes: fc1b691d7651 ("perf buildid-cache: Add ability to add kcore to the cache")
> Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Thanks,
Namhyung
> ---
> tools/perf/util/symbol-elf.c | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
> index 75bec32d4f57..647b7dff8ef3 100644
> --- a/tools/perf/util/symbol-elf.c
> +++ b/tools/perf/util/symbol-elf.c
> @@ -2102,8 +2102,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,
> * unusual. One significant peculiarity is that the mapping (start -> pgoff)
> * is not the same for the kernel map and the modules map. That happens because
> * the data is copied adjacently whereas the original kcore has gaps. Finally,
> - * kallsyms and modules files are compared with their copies to check that
> - * modules have not been loaded or unloaded while the copies were taking place.
> + * kallsyms file is compared with its copy to check that modules have not been
> + * loaded or unloaded while the copies were taking place.
> *
> * Return: %0 on success, %-1 on failure.
> */
> @@ -2166,9 +2166,6 @@ int kcore_copy(const char *from_dir, const char *to_dir)
> goto out_extract_close;
> }
>
> - if (kcore_copy__compare_file(from_dir, to_dir, "modules"))
> - goto out_extract_close;
> -
> if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms"))
> goto out_extract_close;
>
> --
> 2.25.1
>
Em Fri, Sep 16, 2022 at 11:02:25AM -0700, Namhyung Kim escreveu:
> On Wed, Sep 14, 2022 at 5:24 AM Adrian Hunter <[email protected]> wrote:
> >
> > /proc/kallsyms and /proc/modules are compared before and after the copy
> > in order to ensure no changes during the copy. However /proc/modules
> > also might change due to reference counts changing even though that
> > does not make any difference. Any modules loaded or unloaded should be
> > visible in changes to kallsyms, so it is not necessary to check
> > /proc/modules also anyway.
> >
> > Remove the comparison checking that /proc/modules is unchanged.
> >
> > Reported-by: Daniel Dao <[email protected]>
> > Fixes: fc1b691d7651 ("perf buildid-cache: Add ability to add kcore to the cache")
> > Signed-off-by: Adrian Hunter <[email protected]>
>
> Acked-by: Namhyung Kim <[email protected]>
Thanks, applied.
- Arnaldo
> Thanks,
> Namhyung
>
>
> > ---
> > tools/perf/util/symbol-elf.c | 7 ++-----
> > 1 file changed, 2 insertions(+), 5 deletions(-)
> >
> > diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
> > index 75bec32d4f57..647b7dff8ef3 100644
> > --- a/tools/perf/util/symbol-elf.c
> > +++ b/tools/perf/util/symbol-elf.c
> > @@ -2102,8 +2102,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,
> > * unusual. One significant peculiarity is that the mapping (start -> pgoff)
> > * is not the same for the kernel map and the modules map. That happens because
> > * the data is copied adjacently whereas the original kcore has gaps. Finally,
> > - * kallsyms and modules files are compared with their copies to check that
> > - * modules have not been loaded or unloaded while the copies were taking place.
> > + * kallsyms file is compared with its copy to check that modules have not been
> > + * loaded or unloaded while the copies were taking place.
> > *
> > * Return: %0 on success, %-1 on failure.
> > */
> > @@ -2166,9 +2166,6 @@ int kcore_copy(const char *from_dir, const char *to_dir)
> > goto out_extract_close;
> > }
> >
> > - if (kcore_copy__compare_file(from_dir, to_dir, "modules"))
> > - goto out_extract_close;
> > -
> > if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms"))
> > goto out_extract_close;
> >
> > --
> > 2.25.1
> >
--
- Arnaldo