Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead
drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead
drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead
drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead
Cc: Jack Wang <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: [email protected]
Signed-off-by: Lee Jones <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 49bf2f70a470e..6b600e33e9e8d 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1175,7 +1175,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
#ifndef PM8001_USE_MSIX
/**
- * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt
* @pm8001_ha: our hba card information
*/
static void
@@ -1248,7 +1248,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
}
/**
- * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt
* @pm8001_ha: our hba card information
* @vec: unused
*/
@@ -3219,7 +3219,7 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
}
/**
- * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * pm8001_get_attached_sas_addr - extract/generate attached SAS address
* @phy: pointer to asd_phy
* @sas_addr: pointer to buffer where the SAS address is to be written
*
@@ -3546,7 +3546,7 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * fw_flash_update_resp - Response from FW for flash update command.
+ * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
--
2.27.0
On Wed, Mar 3, 2021 at 3:47 PM Lee Jones <[email protected]> wrote:
>
> Fixes the following W=1 kernel build warning(s):
>
> drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead
> drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead
> drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead
> drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead
>
> Cc: Jack Wang <[email protected]>
> Cc: "James E.J. Bottomley" <[email protected]>
> Cc: "Martin K. Petersen" <[email protected]>
> Cc: [email protected]
> Signed-off-by: Lee Jones <[email protected]>
Acked-by: Jack Wang <[email protected]>
Thanks
> ---
> drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index 49bf2f70a470e..6b600e33e9e8d 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1175,7 +1175,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
>
> #ifndef PM8001_USE_MSIX
> /**
> - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
> + * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt
> * @pm8001_ha: our hba card information
> */
> static void
> @@ -1248,7 +1248,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
> }
>
> /**
> - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
> + * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt
> * @pm8001_ha: our hba card information
> * @vec: unused
> */
> @@ -3219,7 +3219,7 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
> }
>
> /**
> - * asd_get_attached_sas_addr -- extract/generate attached SAS address
> + * pm8001_get_attached_sas_addr - extract/generate attached SAS address
> * @phy: pointer to asd_phy
> * @sas_addr: pointer to buffer where the SAS address is to be written
> *
> @@ -3546,7 +3546,7 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
>
> /**
> - * fw_flash_update_resp - Response from FW for flash update command.
> + * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command.
> * @pm8001_ha: our hba card information
> * @piomb: IO message buffer
> */
> --
> 2.27.0
>