Hi,
This patchset registers the cros_ec_accel_legacy driver if the usual way
of registering the croc_ec sensors hub fails.
Changes in v6:
- Only register accelerometer for the main EC
Changes in v5:
- Remove the driver which is already merged
- Rebased on top of patchset [1]
Changes in v4:
- Use correct bitmask for scale channel specification
- Use precomputed scale factor value
Changes in v3:
- Use kernel-doc notation for function headers
- Add more comment to sensor ID sysfs attribute documentation
- Restore accidentally deleted comment for IIO_CHAN_INFO_CALIBBIAS handling in
iio_info write_raw() callback
Changes in v2:
- Reorganize code to avoid forward declarations
- Simplify capture buffer declaration (also helps to remove forward
declarations)
- Make use of iio_push_to_buffers_with_timestamp() and let the
framework handle timestamp copy into capture buffer
- Added missing sysfs attribute documentation
- Few cosmetic changes here and there
Enric Balletbo i Serra (1):
platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is
missing.
Thierry Escande (2):
platform/chrome: cros_ec_lpc: Add support for Google Glimmer
platform/chrome: Register cros_ec_accel_legacy driver
drivers/mfd/cros_ec_dev.c | 53 +++++++++++++++++++++++++++++++++++
drivers/platform/chrome/cros_ec_lpc.c | 41 ++++++++++++++++++++++++++-
2 files changed, 93 insertions(+), 1 deletion(-)
--
2.7.4
With this patch, the cros_ec_ctl driver will register the legacy
accelerometer driver (named cros_ec_accel_legacy) if it fails to
register sensors through the usual path cros_ec_sensors_register().
This legacy device is present on Chromebook devices with older EC
firmware only supporting deprecated EC commands (Glimmer based devices).
Signed-off-by: Thierry Escande <[email protected]>
---
drivers/mfd/cros_ec_dev.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 3c4859d9c3c1..ec518a9f564f 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -389,6 +389,63 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
kfree(msg);
}
+#define CROS_EC_SENSOR_LEGACY_NUM 2
+static struct mfd_cell cros_ec_accel_legacy_cells[CROS_EC_SENSOR_LEGACY_NUM];
+
+static void cros_ec_accel_legacy_register(struct cros_ec_dev *ec)
+{
+ struct cros_ec_device *ec_dev = ec->ec_dev;
+ u8 status;
+ int i, ret;
+ struct cros_ec_sensor_platform
+ sensor_platforms[CROS_EC_SENSOR_LEGACY_NUM];
+
+ /*
+ * EC that need legacy support are the main EC, directly connected to
+ * the AP.
+ */
+ if (ec->cmd_offset != 0)
+ return;
+
+ /*
+ * Check if EC supports direct memory reads and if EC has
+ * accelerometers.
+ */
+ if (!ec_dev->cmd_readmem)
+ return;
+
+ ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS, 1, &status);
+ if (ret < 0) {
+ dev_warn(ec->dev, "EC does not support direct reads.\n");
+ return;
+ }
+
+ /* Check if EC has accelerometers. */
+ if (!(status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) {
+ dev_info(ec->dev, "EC does not have accelerometers.\n");
+ return;
+ }
+
+ /*
+ * Register 2 accelerometers
+ */
+ for (i = 0; i < CROS_EC_SENSOR_LEGACY_NUM; i++) {
+ cros_ec_accel_legacy_cells[i].name = "cros-ec-accel-legacy";
+ sensor_platforms[i].sensor_num = i;
+ cros_ec_accel_legacy_cells[i].id = i;
+ cros_ec_accel_legacy_cells[i].platform_data =
+ &sensor_platforms[i];
+ cros_ec_accel_legacy_cells[i].pdata_size =
+ sizeof(struct cros_ec_sensor_platform);
+ }
+ ret = mfd_add_devices(ec->dev, PLATFORM_DEVID_AUTO,
+ cros_ec_accel_legacy_cells,
+ CROS_EC_SENSOR_LEGACY_NUM,
+ NULL, 0, NULL);
+ if (ret)
+ dev_err(ec_dev->dev, "failed to add EC sensors\n");
+}
+
static int ec_device_probe(struct platform_device *pdev)
{
int retval = -ENOMEM;
@@ -436,6 +493,9 @@ static int ec_device_probe(struct platform_device *pdev)
/* check whether this EC is a sensor hub. */
if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
cros_ec_sensors_register(ec);
+ else
+ /* Workaroud for older EC firmware */
+ cros_ec_accel_legacy_register(ec);
/* Take control of the lightbar from the EC. */
lb_manual_suspend_ctrl(ec, 1);
--
2.14.1
On Fri, Jan 19, 2018 at 3:00 AM, Thierry Escande
<[email protected]> wrote:
>
> With this patch, the cros_ec_ctl driver will register the legacy
> accelerometer driver (named cros_ec_accel_legacy) if it fails to
> register sensors through the usual path cros_ec_sensors_register().
> This legacy device is present on Chromebook devices with older EC
> firmware only supporting deprecated EC commands (Glimmer based devices).
>
> Signed-off-by: Thierry Escande <[email protected]>
Tested-by: Gwendal Grignou <[email protected]>
Integrated into chromeos kernel [internal CL:891664]
Tested with Glimmer (legacy driver required) and Samus (check driver
is not loaded).
[Retry in text mode only]
>
> ---
> drivers/mfd/cros_ec_dev.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> index 3c4859d9c3c1..ec518a9f564f 100644
> --- a/drivers/mfd/cros_ec_dev.c
> +++ b/drivers/mfd/cros_ec_dev.c
> @@ -389,6 +389,63 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
> kfree(msg);
> }
>
> +#define CROS_EC_SENSOR_LEGACY_NUM 2
> +static struct mfd_cell cros_ec_accel_legacy_cells[CROS_EC_SENSOR_LEGACY_NUM];
> +
> +static void cros_ec_accel_legacy_register(struct cros_ec_dev *ec)
> +{
> + struct cros_ec_device *ec_dev = ec->ec_dev;
> + u8 status;
> + int i, ret;
> + struct cros_ec_sensor_platform
> + sensor_platforms[CROS_EC_SENSOR_LEGACY_NUM];
> +
> + /*
> + * EC that need legacy support are the main EC, directly connected to
> + * the AP.
> + */
> + if (ec->cmd_offset != 0)
> + return;
> +
> + /*
> + * Check if EC supports direct memory reads and if EC has
> + * accelerometers.
> + */
> + if (!ec_dev->cmd_readmem)
> + return;
> +
> + ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS, 1, &status);
> + if (ret < 0) {
> + dev_warn(ec->dev, "EC does not support direct reads.\n");
> + return;
> + }
> +
> + /* Check if EC has accelerometers. */
> + if (!(status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) {
> + dev_info(ec->dev, "EC does not have accelerometers.\n");
> + return;
> + }
> +
> + /*
> + * Register 2 accelerometers
> + */
> + for (i = 0; i < CROS_EC_SENSOR_LEGACY_NUM; i++) {
> + cros_ec_accel_legacy_cells[i].name = "cros-ec-accel-legacy";
> + sensor_platforms[i].sensor_num = i;
> + cros_ec_accel_legacy_cells[i].id = i;
> + cros_ec_accel_legacy_cells[i].platform_data =
> + &sensor_platforms[i];
> + cros_ec_accel_legacy_cells[i].pdata_size =
> + sizeof(struct cros_ec_sensor_platform);
> + }
> + ret = mfd_add_devices(ec->dev, PLATFORM_DEVID_AUTO,
> + cros_ec_accel_legacy_cells,
> + CROS_EC_SENSOR_LEGACY_NUM,
> + NULL, 0, NULL);
> + if (ret)
> + dev_err(ec_dev->dev, "failed to add EC sensors\n");
> +}
> +
> static int ec_device_probe(struct platform_device *pdev)
> {
> int retval = -ENOMEM;
> @@ -436,6 +493,9 @@ static int ec_device_probe(struct platform_device *pdev)
> /* check whether this EC is a sensor hub. */
> if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
> cros_ec_sensors_register(ec);
> + else
> + /* Workaroud for older EC firmware */
> + cros_ec_accel_legacy_register(ec);
>
> /* Take control of the lightbar from the EC. */
> lb_manual_suspend_ctrl(ec, 1);
> --
> 2.14.1
>