DMT monitors does not necessarely report a maximum TMDS clock
in a VSDB EDID extension.
In this case, all modes are wrongly rejected, including
the DRM fallback EDID.
This patch only rejects modes whith clock > max_tmds_clock if
the max_tmds_clock is specified. This will only reject
4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock.
Reported-by: Maxime Jourdan <[email protected]>
Fixes: d7d8fb7046b6 ("drm/meson: add HDMI div40 TMDS mode")
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index e28814f4ea6c..563953ec6ad0 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -569,7 +569,8 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
/* If sink max TMDS clock, we reject the mode */
- if (mode->clock > connector->display_info.max_tmds_clock)
+ if (connector->display_info.max_tmds_clock &&
+ mode->clock > connector->display_info.max_tmds_clock)
return MODE_BAD;
/* Check against non-VIC supported modes */
--
2.21.0
Hi Neil,
On Wed, Mar 20, 2019 at 9:11 AM Neil Armstrong <[email protected]> wrote:
>
> DMT monitors does not necessarely report a maximum TMDS clock
> in a VSDB EDID extension.
>
> In this case, all modes are wrongly rejected, including
> the DRM fallback EDID.
>
> This patch only rejects modes whith clock > max_tmds_clock if
> the max_tmds_clock is specified. This will only reject
> 4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock.
>
> Reported-by: Maxime Jourdan <[email protected]>
> Fixes: d7d8fb7046b6 ("drm/meson: add HDMI div40 TMDS mode")
> Signed-off-by: Neil Armstrong <[email protected]>
> ---
> drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index e28814f4ea6c..563953ec6ad0 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -569,7 +569,8 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
> DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
>
> /* If sink max TMDS clock, we reject the mode */
> - if (mode->clock > connector->display_info.max_tmds_clock)
> + if (connector->display_info.max_tmds_clock &&
> + mode->clock > connector->display_info.max_tmds_clock)
> return MODE_BAD;
>
> /* Check against non-VIC supported modes */
> --
> 2.21.0
>
Thanks, this patch restores HDMI output with my old 1080p TV which
does not specify a max tmds clock in its EDID. (all modes were
considered BAD before).
Tested-by: Maxime Jourdan <[email protected]>
Reviewed-by: Maxime Jourdan <[email protected]>
On 20/03/2019 09:11, Neil Armstrong wrote:
> DMT monitors does not necessarely report a maximum TMDS clock
> in a VSDB EDID extension.
>
> In this case, all modes are wrongly rejected, including
> the DRM fallback EDID.
>
> This patch only rejects modes whith clock > max_tmds_clock if
> the max_tmds_clock is specified. This will only reject
> 4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock.
>
> Reported-by: Maxime Jourdan <[email protected]>
> Fixes: d7d8fb7046b6 ("drm/meson: add HDMI div40 TMDS mode")
> Signed-off-by: Neil Armstrong <[email protected]>
> ---
> drivers/gpu/drm/meson/meson_dw_hdmi.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index e28814f4ea6c..563953ec6ad0 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -569,7 +569,8 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
> DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
>
> /* If sink max TMDS clock, we reject the mode */
> - if (mode->clock > connector->display_info.max_tmds_clock)
> + if (connector->display_info.max_tmds_clock &&
> + mode->clock > connector->display_info.max_tmds_clock)
> return MODE_BAD;
>
> /* Check against non-VIC supported modes */
>
Applied to drm-misc-fixes