Enable the dmi driver for riscv which would allow access the
SMBIOS info through some userspace file(/sys/firmware/dmi/*).
The change was based on that of arm64 and has been verified
by dmidecode tool.
Signed-off-by: Haibo Xu <[email protected]>
---
Changes since v1
- Change to use memremap/memunmap for dmi_(early)_remap/unmap
definition(suggested by Ard)
- Minor clean up for comments (Ard)
---
arch/riscv/Kconfig | 11 +++++++++++
arch/riscv/include/asm/dmi.h | 24 ++++++++++++++++++++++++
drivers/firmware/efi/riscv-runtime.c | 13 +++++++++++++
3 files changed, 48 insertions(+)
create mode 100644 arch/riscv/include/asm/dmi.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 8ebafe337eac..3639151cb4ef 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -952,6 +952,17 @@ config EFI
allow the kernel to be booted as an EFI application. This
is only useful on systems that have UEFI firmware.
+config DMI
+ bool "Enable support for SMBIOS (DMI) tables"
+ depends on EFI
+ default y
+ help
+ This enables SMBIOS/DMI feature for systems.
+
+ This option is only useful on systems that have UEFI firmware.
+ However, even with this option, the resultant kernel should
+ continue to boot on existing non-UEFI platforms.
+
config CC_HAVE_STACKPROTECTOR_TLS
def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
diff --git a/arch/riscv/include/asm/dmi.h b/arch/riscv/include/asm/dmi.h
new file mode 100644
index 000000000000..ca7cce557ef7
--- /dev/null
+++ b/arch/riscv/include/asm/dmi.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2024 Intel Corporation
+ *
+ * based on arch/arm64/include/asm/dmi.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_DMI_H
+#define __ASM_DMI_H
+
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define dmi_early_remap(x, l) memremap(x, l, MEMREMAP_WB)
+#define dmi_early_unmap(x, l) memunmap(x)
+#define dmi_remap(x, l) memremap(x, l, MEMREMAP_WB)
+#define dmi_unmap(x) memunmap(x)
+#define dmi_alloc(l) kzalloc(l, GFP_KERNEL)
+
+#endif
diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c
index 09525fb5c240..c3bfb9e77e02 100644
--- a/drivers/firmware/efi/riscv-runtime.c
+++ b/drivers/firmware/efi/riscv-runtime.c
@@ -152,3 +152,16 @@ void arch_efi_call_virt_teardown(void)
{
efi_virtmap_unload();
}
+
+static int __init riscv_dmi_init(void)
+{
+ /*
+ * On riscv, DMI depends on UEFI, and dmi_setup() needs to
+ * be called early because dmi_id_init(), which is an arch_initcall
+ * itself, depends on dmi_scan_machine() having been called already.
+ */
+ dmi_setup();
+
+ return 0;
+}
+core_initcall(riscv_dmi_init);
--
2.34.1
On Mon, 18 Mar 2024 at 02:55, Haibo Xu <[email protected]> wrote:
>
> Enable the dmi driver for riscv which would allow access the
> SMBIOS info through some userspace file(/sys/firmware/dmi/*).
>
> The change was based on that of arm64 and has been verified
> by dmidecode tool.
>
> Signed-off-by: Haibo Xu <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
> ---
> Changes since v1
> - Change to use memremap/memunmap for dmi_(early)_remap/unmap
> definition(suggested by Ard)
> - Minor clean up for comments (Ard)
> ---
> arch/riscv/Kconfig | 11 +++++++++++
> arch/riscv/include/asm/dmi.h | 24 ++++++++++++++++++++++++
> drivers/firmware/efi/riscv-runtime.c | 13 +++++++++++++
> 3 files changed, 48 insertions(+)
> create mode 100644 arch/riscv/include/asm/dmi.h
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 8ebafe337eac..3639151cb4ef 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -952,6 +952,17 @@ config EFI
> allow the kernel to be booted as an EFI application. This
> is only useful on systems that have UEFI firmware.
>
> +config DMI
> + bool "Enable support for SMBIOS (DMI) tables"
> + depends on EFI
> + default y
> + help
> + This enables SMBIOS/DMI feature for systems.
> +
> + This option is only useful on systems that have UEFI firmware.
> + However, even with this option, the resultant kernel should
> + continue to boot on existing non-UEFI platforms.
> +
> config CC_HAVE_STACKPROTECTOR_TLS
> def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
>
> diff --git a/arch/riscv/include/asm/dmi.h b/arch/riscv/include/asm/dmi.h
> new file mode 100644
> index 000000000000..ca7cce557ef7
> --- /dev/null
> +++ b/arch/riscv/include/asm/dmi.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2024 Intel Corporation
> + *
> + * based on arch/arm64/include/asm/dmi.h
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#ifndef __ASM_DMI_H
> +#define __ASM_DMI_H
> +
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#define dmi_early_remap(x, l) memremap(x, l, MEMREMAP_WB)
> +#define dmi_early_unmap(x, l) memunmap(x)
> +#define dmi_remap(x, l) memremap(x, l, MEMREMAP_WB)
> +#define dmi_unmap(x) memunmap(x)
> +#define dmi_alloc(l) kzalloc(l, GFP_KERNEL)
> +
> +#endif
> diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c
> index 09525fb5c240..c3bfb9e77e02 100644
> --- a/drivers/firmware/efi/riscv-runtime.c
> +++ b/drivers/firmware/efi/riscv-runtime.c
> @@ -152,3 +152,16 @@ void arch_efi_call_virt_teardown(void)
> {
> efi_virtmap_unload();
> }
> +
> +static int __init riscv_dmi_init(void)
> +{
> + /*
> + * On riscv, DMI depends on UEFI, and dmi_setup() needs to
> + * be called early because dmi_id_init(), which is an arch_initcall
> + * itself, depends on dmi_scan_machine() having been called already.
> + */
> + dmi_setup();
> +
> + return 0;
> +}
> +core_initcall(riscv_dmi_init);
> --
> 2.34.1
>
On 3/17/24 19:09, Haibo Xu wrote:
> Enable the dmi driver for riscv which would allow access the
> SMBIOS info through some userspace file(/sys/firmware/dmi/*).
>
> The change was based on that of arm64 and has been verified
> by dmidecode tool.
>
> Signed-off-by: Haibo Xu <[email protected]>
> ---
> Changes since v1
> - Change to use memremap/memunmap for dmi_(early)_remap/unmap
> definition(suggested by Ard)
> - Minor clean up for comments (Ard)
> ---
> arch/riscv/Kconfig | 11 +++++++++++
> arch/riscv/include/asm/dmi.h | 24 ++++++++++++++++++++++++
> drivers/firmware/efi/riscv-runtime.c | 13 +++++++++++++
> 3 files changed, 48 insertions(+)
> create mode 100644 arch/riscv/include/asm/dmi.h
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 8ebafe337eac..3639151cb4ef 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -952,6 +952,17 @@ config EFI
> allow the kernel to be booted as an EFI application. This
> is only useful on systems that have UEFI firmware.
>
> +config DMI
> + bool "Enable support for SMBIOS (DMI) tables"
> + depends on EFI
> + default y
> + help
> + This enables SMBIOS/DMI feature for systems.
> +
> + This option is only useful on systems that have UEFI firmware.
> + However, even with this option, the resultant kernel should
> + continue to boot on existing non-UEFI platforms.
> +
> config CC_HAVE_STACKPROTECTOR_TLS
> def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
>
> diff --git a/arch/riscv/include/asm/dmi.h b/arch/riscv/include/asm/dmi.h
> new file mode 100644
> index 000000000000..ca7cce557ef7
> --- /dev/null
> +++ b/arch/riscv/include/asm/dmi.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2024 Intel Corporation
> + *
> + * based on arch/arm64/include/asm/dmi.h
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#ifndef __ASM_DMI_H
> +#define __ASM_DMI_H
> +
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#define dmi_early_remap(x, l) memremap(x, l, MEMREMAP_WB)
> +#define dmi_early_unmap(x, l) memunmap(x)
> +#define dmi_remap(x, l) memremap(x, l, MEMREMAP_WB)
> +#define dmi_unmap(x) memunmap(x)
> +#define dmi_alloc(l) kzalloc(l, GFP_KERNEL)
> +
> +#endif
> diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c
> index 09525fb5c240..c3bfb9e77e02 100644
> --- a/drivers/firmware/efi/riscv-runtime.c
> +++ b/drivers/firmware/efi/riscv-runtime.c
> @@ -152,3 +152,16 @@ void arch_efi_call_virt_teardown(void)
> {
> efi_virtmap_unload();
> }
> +
> +static int __init riscv_dmi_init(void)
> +{
> + /*
> + * On riscv, DMI depends on UEFI, and dmi_setup() needs to
> + * be called early because dmi_id_init(), which is an arch_initcall
> + * itself, depends on dmi_scan_machine() having been called already.
> + */
> + dmi_setup();
> +
> + return 0;
> +}
> +core_initcall(riscv_dmi_init);
Reviewed-by: Atish Patra <[email protected]>
Hi @Palmer,
Could you please let me know whether this patch was OK for the next RISC-V PULL?
Thanks,
Haibo
On Wed, Mar 20, 2024 at 3:46 AM Atish Patra <[email protected]> wrote:
>
> On 3/17/24 19:09, Haibo Xu wrote:
> > Enable the dmi driver for riscv which would allow access the
> > SMBIOS info through some userspace file(/sys/firmware/dmi/*).
> >
> > The change was based on that of arm64 and has been verified
> > by dmidecode tool.
> >
> > Signed-off-by: Haibo Xu <[email protected]>
> > ---
> > Changes since v1
> > - Change to use memremap/memunmap for dmi_(early)_remap/unmap
> > definition(suggested by Ard)
> > - Minor clean up for comments (Ard)
> > ---
> > arch/riscv/Kconfig | 11 +++++++++++
> > arch/riscv/include/asm/dmi.h | 24 ++++++++++++++++++++++++
> > drivers/firmware/efi/riscv-runtime.c | 13 +++++++++++++
> > 3 files changed, 48 insertions(+)
> > create mode 100644 arch/riscv/include/asm/dmi.h
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 8ebafe337eac..3639151cb4ef 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -952,6 +952,17 @@ config EFI
> > allow the kernel to be booted as an EFI application. This
> > is only useful on systems that have UEFI firmware.
> >
> > +config DMI
> > + bool "Enable support for SMBIOS (DMI) tables"
> > + depends on EFI
> > + default y
> > + help
> > + This enables SMBIOS/DMI feature for systems.
> > +
> > + This option is only useful on systems that have UEFI firmware.
> > + However, even with this option, the resultant kernel should
> > + continue to boot on existing non-UEFI platforms.
> > +
> > config CC_HAVE_STACKPROTECTOR_TLS
> > def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
> >
> > diff --git a/arch/riscv/include/asm/dmi.h b/arch/riscv/include/asm/dmi.h
> > new file mode 100644
> > index 000000000000..ca7cce557ef7
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/dmi.h
> > @@ -0,0 +1,24 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2024 Intel Corporation
> > + *
> > + * based on arch/arm64/include/asm/dmi.h
> > + *
> > + * This file is subject to the terms and conditions of the GNU General Public
> > + * License. See the file "COPYING" in the main directory of this archive
> > + * for more details.
> > + */
> > +
> > +#ifndef __ASM_DMI_H
> > +#define __ASM_DMI_H
> > +
> > +#include <linux/io.h>
> > +#include <linux/slab.h>
> > +
> > +#define dmi_early_remap(x, l) memremap(x, l, MEMREMAP_WB)
> > +#define dmi_early_unmap(x, l) memunmap(x)
> > +#define dmi_remap(x, l) memremap(x, l, MEMREMAP_WB)
> > +#define dmi_unmap(x) memunmap(x)
> > +#define dmi_alloc(l) kzalloc(l, GFP_KERNEL)
> > +
> > +#endif
> > diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c
> > index 09525fb5c240..c3bfb9e77e02 100644
> > --- a/drivers/firmware/efi/riscv-runtime.c
> > +++ b/drivers/firmware/efi/riscv-runtime.c
> > @@ -152,3 +152,16 @@ void arch_efi_call_virt_teardown(void)
> > {
> > efi_virtmap_unload();
> > }
> > +
> > +static int __init riscv_dmi_init(void)
> > +{
> > + /*
> > + * On riscv, DMI depends on UEFI, and dmi_setup() needs to
> > + * be called early because dmi_id_init(), which is an arch_initcall
> > + * itself, depends on dmi_scan_machine() having been called already.
> > + */
> > + dmi_setup();
> > +
> > + return 0;
> > +}
> > +core_initcall(riscv_dmi_init);
>
> Reviewed-by: Atish Patra <[email protected]>