CONFIG_OF can be set by a randconfig or by a user -- without setting the
early flattree option (OF_EARLY_FLATTREE). This causes build errors.
However, if randconfig or a user sets USE_OF in the Xtensa config,
the right kconfig symbols are set to enable xtensa/kernel/setup.c to
build.
Fixes these build errors:
../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
| ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
228 | early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);
Fixes: da844a81779e ("xtensa: add device trees support")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: [email protected]
---
arch/xtensa/kernel/setup.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- linux-next-20210917.orig/arch/xtensa/kernel/setup.c
+++ linux-next-20210917/arch/xtensa/kernel/setup.c
@@ -183,7 +183,7 @@ static int __init parse_bootparam(const
}
#endif
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
#if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
@@ -232,7 +232,7 @@ void __init early_init_devtree(void *par
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
}
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
/*
* Initialize architecture. (Early stage)
@@ -253,7 +253,7 @@ void __init init_arch(bp_tag_t *bp_start
if (bp_start)
parse_bootparam(bp_start);
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
early_init_devtree(dtb_start);
#endif
Hi Randy,
On Fri, Sep 24, 2021 at 8:29 PM Randy Dunlap <[email protected]> wrote:
>
> CONFIG_OF can be set by a randconfig or by a user -- without setting the
> early flattree option (OF_EARLY_FLATTREE). This causes build errors.
> However, if randconfig or a user sets USE_OF in the Xtensa config,
> the right kconfig symbols are set to enable xtensa/kernel/setup.c to
> build.
>
> Fixes these build errors:
>
> ../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
> ../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
> 201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
> ../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
> 204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
> ../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
> 204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
> | ^
> ../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
> ../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
> 228 | early_init_dt_scan(params);
> ../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
> 229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);
>
> Fixes: da844a81779e ("xtensa: add device trees support")
> Signed-off-by: Randy Dunlap <[email protected]>
> Cc: Max Filippov <[email protected]>
> Cc: Chris Zankel <[email protected]>
> Cc: [email protected]
> ---
> arch/xtensa/kernel/setup.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
Thanks for your RFC. I've tested it and found a couple more places
where CONFIG_USE_OF should be used instead of CONFIG_OF.
I'll post the revised version.
--
Thanks.
-- Max
On 9/26/21 11:55 AM, Max Filippov wrote:
> Hi Randy,
>
> On Fri, Sep 24, 2021 at 8:29 PM Randy Dunlap <[email protected]> wrote:
>>
>> CONFIG_OF can be set by a randconfig or by a user -- without setting the
>> early flattree option (OF_EARLY_FLATTREE). This causes build errors.
>> However, if randconfig or a user sets USE_OF in the Xtensa config,
>> the right kconfig symbols are set to enable xtensa/kernel/setup.c to
>> build.
>>
>> Fixes these build errors:
>>
>> ../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
>> ../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
>> 201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
>> ../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
>> 204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
>> ../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
>> 204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
>> | ^
>> ../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
>> ../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
>> 228 | early_init_dt_scan(params);
>> ../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
>> 229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);
>>
>> Fixes: da844a81779e ("xtensa: add device trees support")
>> Signed-off-by: Randy Dunlap <[email protected]>
>> Cc: Max Filippov <[email protected]>
>> Cc: Chris Zankel <[email protected]>
>> Cc: [email protected]
>> ---
>> arch/xtensa/kernel/setup.c | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> Thanks for your RFC. I've tested it and found a couple more places
> where CONFIG_USE_OF should be used instead of CONFIG_OF.
> I'll post the revised version.
>
Hi Max,
Thanks for checking and for the extra fixes.
Looks good.
--
~Randy