Fixed the subject.
On Wed, Jan 29, 2014 at 10:00 AM, Max Filippov <[email protected]> wrote:
> Hello David, Ben, Florian, Chris and everybody,
>
> this series improves ethoc behavior in gigabit environment:
> - first patch introduces two phylib setters for 'advertising' and 'supported'
> fields of struct phy_device;
> - second patch disables gigabit advertisement in the attached PHY making
> possible to use gigabit link without any additional setup;
> - third patch adds support to set up MII management bus frequency, adding
> new fields to platform data and to OF bindings;
> - fourth patch adds basic ethtool support to ethoc driver.
>
> These changes allow to use KC-705 board with 50MHz xtensa core and OpenCores
> 10/100 Mbps MAC connected to gigabit network without any additional setup.
>
> Changes v1->v2:
> - new patch "phy: provide accessors for 'advertising' and 'supported' fields";
> - disable both gigabit advertisement and support;
> - drop MDIO bus frequency configurability, always configure for standard
> 2.5MHz;
> - allow using common clock framework to provide ethoc clock;
> - new patch: "net: ethoc: implement ethtool operations";
> - drop device tree bindings documentation patch until common bindings format
> for network drivers is decided.
>
> Max Filippov (4):
> phy: provide accessors for 'advertising' and 'supported' fields
> net: ethoc: don't advertise gigabit speed on attached PHY
> net: ethoc: set up MII management bus clock
> net: ethoc: implement ethtool operations
>
> drivers/net/ethernet/ethoc.c | 130 ++++++++++++++++++++++++++++++++++++++++++-
> include/linux/phy.h | 12 ++++
> include/net/ethoc.h | 1 +
> 3 files changed, 141 insertions(+), 2 deletions(-)
>
> --
> 1.8.1.4
--
Thanks.
-- Max