2021-06-04 23:04:42

by Michael Walle

[permalink] [raw]
Subject: [PATCH v2] gpio: regmap: move drvdata to config data

Drop gpio_regmap_set_drvdata() and instead add it to the configuration
data passed to gpio_regmap_register().

gpio_regmap_set_drvdata() can't really be used in a race free way. This
is because the gpio_regmap object which is needed by _set_drvdata() is
returned by gpio_regmap_register(). On the other hand, the callbacks
which use the drvdata might already be called right after the
gpiochip_add() call in gpio_regmap_register(). Therefore, we have to
provide the drvdata early before we call gpiochip_add().

Signed-off-by: Matti Vaittinen <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
---
changes since v1:
- added Matti's Sob

drivers/gpio/gpio-regmap.c | 7 +------
include/linux/gpio/regmap.h | 6 +++++-
2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 134cedf151a7..583cd1cdead8 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -178,12 +178,6 @@ static int gpio_regmap_direction_output(struct gpio_chip *chip,
return gpio_regmap_set_direction(chip, offset, true);
}

-void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data)
-{
- gpio->driver_data = data;
-}
-EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata);
-
void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio)
{
return gpio->driver_data;
@@ -226,6 +220,7 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
return ERR_PTR(-ENOMEM);

gpio->parent = config->parent;
+ gpio->driver_data = config->drvdata;
gpio->regmap = config->regmap;
gpio->ngpio_per_reg = config->ngpio_per_reg;
gpio->reg_stride = config->reg_stride;
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index 334dd928042b..a9f7b7faf57b 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -37,6 +37,9 @@ struct regmap;
* offset to a register/bitmask pair. If not
* given the default gpio_regmap_simple_xlate()
* is used.
+ * @drvdata: (Optional) Pointer to driver specific data which is
+ * not used by gpio-remap but is provided "as is" to the
+ * driver callback(s).
*
* The ->reg_mask_xlate translates a given base address and GPIO offset to
* register and mask pair. The base address is one of the given register
@@ -78,13 +81,14 @@ struct gpio_regmap_config {
int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
unsigned int offset, unsigned int *reg,
unsigned int *mask);
+
+ void *drvdata;
};

struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config);
void gpio_regmap_unregister(struct gpio_regmap *gpio);
struct gpio_regmap *devm_gpio_regmap_register(struct device *dev,
const struct gpio_regmap_config *config);
-void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data);
void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio);

#endif /* _LINUX_GPIO_REGMAP_H */
--
2.20.1


2021-06-07 13:41:51

by Bartosz Golaszewski

[permalink] [raw]
Subject: Re: [PATCH v2] gpio: regmap: move drvdata to config data

On Sat, Jun 5, 2021 at 1:01 AM Michael Walle <[email protected]> wrote:
>
> Drop gpio_regmap_set_drvdata() and instead add it to the configuration
> data passed to gpio_regmap_register().
>
> gpio_regmap_set_drvdata() can't really be used in a race free way. This
> is because the gpio_regmap object which is needed by _set_drvdata() is
> returned by gpio_regmap_register(). On the other hand, the callbacks
> which use the drvdata might already be called right after the
> gpiochip_add() call in gpio_regmap_register(). Therefore, we have to
> provide the drvdata early before we call gpiochip_add().
>
> Signed-off-by: Matti Vaittinen <[email protected]>
> Signed-off-by: Michael Walle <[email protected]>
> Reviewed-by: Linus Walleij <[email protected]>
> ---

Applied, thanks!

Bart