The voltages in pf8x00_sw7_voltages are in ascendant order, so use
regulator_map_voltage_ascend.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/pf8x00-regulator.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 9b28bd63208d..5d319fb81288 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -359,6 +359,7 @@ static const struct regulator_ops pf8x00_buck7_ops = {
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
--
2.25.1
Le mar. 16 févr. 2021 à 07:01, Axel Lin <[email protected]> a écrit :
>
> The voltages in pf8x00_sw7_voltages are in ascendant order, so use
> regulator_map_voltage_ascend.
>
> Signed-off-by: Axel Lin <[email protected]>
> ---
> drivers/regulator/pf8x00-regulator.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
> index 9b28bd63208d..5d319fb81288 100644
> --- a/drivers/regulator/pf8x00-regulator.c
> +++ b/drivers/regulator/pf8x00-regulator.c
> @@ -359,6 +359,7 @@ static const struct regulator_ops pf8x00_buck7_ops = {
> .disable = regulator_disable_regmap,
> .is_enabled = regulator_is_enabled_regmap,
> .list_voltage = regulator_list_voltage_table,
> + .map_voltage = regulator_map_voltage_ascend,
> .set_voltage_sel = regulator_set_voltage_sel_regmap,
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .get_current_limit = regulator_get_current_limit_regmap,
> --
> 2.25.1
>
Reviewed-by: Adrien Grassein <[email protected]>
On Tue, Feb 16, 2021 at 11:31 AM Axel Lin <[email protected]> wrote:
>
> The voltages in pf8x00_sw7_voltages are in ascendant order, so use
> regulator_map_voltage_ascend.
>
> Signed-off-by: Axel Lin <[email protected]>
> ---
Reviewed-by: Jagan Teki <[email protected]>
On Tue, 16 Feb 2021 14:01:28 +0800, Axel Lin wrote:
> The voltages in pf8x00_sw7_voltages are in ascendant order, so use
> regulator_map_voltage_ascend.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/1] regulator: pf8x00: Use regulator_map_voltage_ascend for pf8x00_buck7_ops
commit: 6930ab7ac03c1be5d1944473cbf327c9d4d14ce4
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark