This patch adds one static ida variable to manage SPI bus number, moreover
we can get dynamic bus number from ida instead of one "dynamic" IDs, which
can be removed.
Signed-off-by: Baolin Wang <[email protected]>
---
drivers/spi/spi.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 4fcbb0a..1498be2 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -40,10 +40,13 @@
#include <linux/ioport.h>
#include <linux/acpi.h>
#include <linux/highmem.h>
+#include <linux/idr.h>
#define CREATE_TRACE_POINTS
#include <trace/events/spi.h>
+static DEFINE_IDA(spi_bus_ida);
+
static void spidev_release(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
@@ -2052,7 +2055,6 @@ static int of_spi_register_master(struct spi_controller *ctlr)
*/
int spi_register_controller(struct spi_controller *ctlr)
{
- static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
struct device *dev = ctlr->dev.parent;
struct boardinfo *bi;
int status = -ENODEV;
@@ -2076,12 +2078,15 @@ int spi_register_controller(struct spi_controller *ctlr)
if ((ctlr->bus_num < 0) && ctlr->dev.of_node)
ctlr->bus_num = of_alias_get_id(ctlr->dev.of_node, "spi");
- /* convention: dynamically assigned bus IDs count down from the max */
+ if (ctlr->bus_num >= 0)
+ ctlr->bus_num = ida_simple_get(&spi_bus_ida, ctlr->bus_num,
+ ctlr->bus_num + 1, GFP_KERNEL);
+
if (ctlr->bus_num < 0) {
- /* FIXME switch to an IDR based scheme, something like
- * I2C now uses, so we can't run out of "dynamic" IDs
- */
- ctlr->bus_num = atomic_dec_return(&dyn_bus_id);
+ ctlr->bus_num = ida_simple_get(&spi_bus_ida, 0, 0, GFP_KERNEL);
+ if (ctlr->bus_num < 0)
+ return ctlr->bus_num;
+
dynamic = 1;
}
@@ -2128,7 +2133,10 @@ int spi_register_controller(struct spi_controller *ctlr)
/* Register devices from the device tree and ACPI */
of_register_spi_devices(ctlr);
acpi_register_spi_devices(ctlr);
+
+ return 0;
done:
+ ida_simple_remove(&spi_bus_ida, ctlr->bus_num);
return status;
}
EXPORT_SYMBOL_GPL(spi_register_controller);
@@ -2202,6 +2210,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
list_del(&ctlr->list);
mutex_unlock(&board_lock);
+ ida_simple_remove(&spi_bus_ida, ctlr->bus_num);
dummy = device_for_each_child(&ctlr->dev, NULL, __unregister);
device_unregister(&ctlr->dev);
}
--
1.7.9.5
On Wed, Sep 06, 2017 at 07:26:51PM +0800, Baolin Wang wrote:
> This patch adds one static ida variable to manage SPI bus number, moreover
> we can get dynamic bus number from ida instead of one "dynamic" IDs, which
> can be removed.
Someone else actually addressed this TODO item just in the last
development cycle, v4.14 should contain an equivalent patch. Always
best to check linux-next for the latest development state!
Hi Mark,
On 6 September 2017 at 21:28, Mark Brown <[email protected]> wrote:
> On Wed, Sep 06, 2017 at 07:26:51PM +0800, Baolin Wang wrote:
>> This patch adds one static ida variable to manage SPI bus number, moreover
>> we can get dynamic bus number from ida instead of one "dynamic" IDs, which
>> can be removed.
>
> Someone else actually addressed this TODO item just in the last
> development cycle, v4.14 should contain an equivalent patch. Always
> best to check linux-next for the latest development state!
Yes, I saw that patch. Then ignore this patch, sorry.
--
Baolin.wang
Best Regards