Signed-off-by: Ryan Lee <[email protected]>
---
Changes since v3:
* Combined MAX98926 and MAX98927 binding. Kept existing property name.
Changes since v2:
* Removed local register read/write function to avoid duplication of ASoC core function.
.../devicetree/bindings/sound/max98925.txt | 22 -
.../devicetree/bindings/sound/max98926.txt | 32 -
.../devicetree/bindings/sound/max9892x.txt | 41 +
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/max98927.c | 826 +++++++++++++++++++++
sound/soc/codecs/max98927.h | 267 +++++++
7 files changed, 1141 insertions(+), 54 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/max98925.txt
delete mode 100644 Documentation/devicetree/bindings/sound/max98926.txt
create mode 100755 Documentation/devicetree/bindings/sound/max9892x.txt
mode change 100644 => 100755 sound/soc/codecs/Kconfig
mode change 100644 => 100755 sound/soc/codecs/Makefile
create mode 100755 sound/soc/codecs/max98927.c
create mode 100755 sound/soc/codecs/max98927.h
diff --git a/Documentation/devicetree/bindings/sound/max98925.txt b/Documentation/devicetree/bindings/sound/max98925.txt
deleted file mode 100644
index 27be63e..0000000
--- a/Documentation/devicetree/bindings/sound/max98925.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-max98925 audio CODEC
-
-This device supports I2C.
-
-Required properties:
-
- - compatible : "maxim,max98925"
-
- - vmon-slot-no : slot number used to send voltage information
-
- - imon-slot-no : slot number used to send current information
-
- - reg : the I2C address of the device for I2C
-
-Example:
-
-codec: max98925@1a {
- compatible = "maxim,max98925";
- vmon-slot-no = <0>;
- imon-slot-no = <2>;
- reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/max98926.txt b/Documentation/devicetree/bindings/sound/max98926.txt
deleted file mode 100644
index 0b7f4e4..0000000
--- a/Documentation/devicetree/bindings/sound/max98926.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-max98926 audio CODEC
-
-This device supports I2C.
-
-Required properties:
-
- - compatible : "maxim,max98926"
-
- - vmon-slot-no : slot number used to send voltage information
- or in inteleave mode this will be used as
- interleave slot.
-
- - imon-slot-no : slot number used to send current information
-
- - interleave-mode : When using two MAX98926 in a system it is
- possible to create ADC data that that will
- overflow the frame size. Digital Audio Interleave
- mode provides a means to output VMON and IMON data
- from two devices on a single DOUT line when running
- smaller frames sizes such as 32 BCLKS per LRCLK or
- 48 BCLKS per LRCLK.
-
- - reg : the I2C address of the device for I2C
-
-Example:
-
-codec: max98926@1a {
- compatible = "maxim,max98926";
- vmon-slot-no = <0>;
- imon-slot-no = <2>;
- reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt
new file mode 100755
index 0000000..f617159
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max9892x.txt
@@ -0,0 +1,41 @@
+Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier
+
+This device supports I2C.
+
+Required properties:
+
+ - compatible : should be one of the following
+ - "maxim,max98925"
+ - "maxim,max98926"
+ - "maxim,max98927"
+
+ - vmon-slot-no : slot number used to send voltage information
+ or in inteleave mode this will be used as
+ interleave slot.
+ MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0
+ MAX98927 slot range : 0 ~ 15, Default : 0
+
+ - imon-slot-no : slot number used to send current information
+ MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0
+ MAX98927 slot range : 0 ~ 15, Default : 0
+
+ - interleave-mode : When using two MAX9892X in a system it is
+ possible to create ADC data that that will
+ overflow the frame size. Digital Audio Interleave
+ mode provides a means to output VMON and IMON data
+ from two devices on a single DOUT line when running
+ smaller frames sizes such as 32 BCLKS per LRCLK or
+ 48 BCLKS per LRCLK.
+ Range : 0 (off), 1 (on), Default : 0
+
+ - reg : the I2C address of the device for I2C
+
+Example:
+
+codec: max98927@3a {
+ compatible = "maxim,max98927";
+ vmon-slot-no = <0>;
+ imon-slot-no = <1>;
+ interleave-mode = <0>;
+ reg = <0x3a>;
+};
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
old mode 100644
new mode 100755
index e49e9da..cbdc8aa
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -89,6 +89,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_MAX9867 if I2C
select SND_SOC_MAX98925 if I2C
select SND_SOC_MAX98926 if I2C
+ select SND_SOC_MAX98927 if I2C
select SND_SOC_MAX9850 if I2C
select SND_SOC_MAX9860 if I2C
select SND_SOC_MAX9768 if I2C
@@ -588,6 +589,10 @@ config SND_SOC_MAX98925
config SND_SOC_MAX98926
tristate
+config SND_SOC_MAX98927
+ tristate "Maxim Integrated MAX98927 Speaker Amplifier"
+ depends on I2C
+
config SND_SOC_MAX9850
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
old mode 100644
new mode 100755
index 1796cb9..187a639
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -84,6 +84,7 @@ snd-soc-max98371-objs := max98371.o
snd-soc-max9867-objs := max9867.o
snd-soc-max98925-objs := max98925.o
snd-soc-max98926-objs := max98926.o
+snd-soc-max98927-objs := max98927.o
snd-soc-max9850-objs := max9850.o
snd-soc-max9860-objs := max9860.o
snd-soc-mc13783-objs := mc13783.o
@@ -313,6 +314,7 @@ obj-$(CONFIG_SND_SOC_MAX98357A) += snd-soc-max98357a.o
obj-$(CONFIG_SND_SOC_MAX9867) += snd-soc-max9867.o
obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o
+obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o
obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o
obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c
new file mode 100755
index 0000000..15f2192
--- /dev/null
+++ b/sound/soc/codecs/max98927.c
@@ -0,0 +1,826 @@
+/*
+ * max98927.c -- MAX98927 ALSA Soc Audio driver
+ *
+ * Copyright (C) 2016 Maxim Integrated Products
+ * Author: Ryan Lee <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/cdev.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <sound/tlv.h>
+#include "max98927.h"
+
+static struct reg_default max98927_reg[] = {
+ {MAX98927_R0001_INT_RAW1, 0x00},
+ {MAX98927_R0002_INT_RAW2, 0x00},
+ {MAX98927_R0003_INT_RAW3, 0x00},
+ {MAX98927_R0004_INT_STATE1, 0x00},
+ {MAX98927_R0005_INT_STATE2, 0x00},
+ {MAX98927_R0006_INT_STATE3, 0x00},
+ {MAX98927_R0007_INT_FLAG1, 0x00},
+ {MAX98927_R0008_INT_FLAG2, 0x00},
+ {MAX98927_R0009_INT_FLAG3, 0x00},
+ {MAX98927_R000A_INT_EN1, 0x00},
+ {MAX98927_R000B_INT_EN2, 0x00},
+ {MAX98927_R000C_INT_EN3, 0x00},
+ {MAX98927_R000D_INT_FLAG_CLR1, 0x00},
+ {MAX98927_R000E_INT_FLAG_CLR2, 0x00},
+ {MAX98927_R000F_INT_FLAG_CLR3, 0x00},
+ {MAX98927_R0010_IRQ_CTRL, 0x00},
+ {MAX98927_R0011_CLK_MON, 0x00},
+ {MAX98927_R0012_WDOG_CTRL, 0x00},
+ {MAX98927_R0013_WDOG_RST, 0x00},
+ {MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH, 0x00},
+ {MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH, 0x00},
+ {MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS, 0x00},
+ {MAX98927_R0017_PIN_CFG, 0x55},
+ {MAX98927_R0018_PCM_RX_EN_A, 0x00},
+ {MAX98927_R0019_PCM_RX_EN_B, 0x00},
+ {MAX98927_R001A_PCM_TX_EN_A, 0x00},
+ {MAX98927_R001B_PCM_TX_EN_B, 0x00},
+ {MAX98927_R001C_PCM_TX_HIZ_CTRL_A, 0x00},
+ {MAX98927_R001D_PCM_TX_HIZ_CTRL_B, 0x00},
+ {MAX98927_R001E_PCM_TX_CH_SRC_A, 0x00},
+ {MAX98927_R001F_PCM_TX_CH_SRC_B, 0x00},
+ {MAX98927_R0020_PCM_MODE_CFG, 0x40},
+ {MAX98927_R0021_PCM_MASTER_MODE, 0x00},
+ {MAX98927_R0022_PCM_CLK_SETUP, 0x22},
+ {MAX98927_R0023_PCM_SR_SETUP1, 0x00},
+ {MAX98927_R0024_PCM_SR_SETUP2, 0x00},
+ {MAX98927_R0025_PCM_TO_SPK_MONOMIX_A, 0x00},
+ {MAX98927_R0026_PCM_TO_SPK_MONOMIX_B, 0x00},
+ {MAX98927_R0027_ICC_RX_EN_A, 0x00},
+ {MAX98927_R0028_ICC_RX_EN_B, 0x00},
+ {MAX98927_R002B_ICC_TX_EN_A, 0x00},
+ {MAX98927_R002C_ICC_TX_EN_B, 0x00},
+ {MAX98927_R002E_ICC_HIZ_MANUAL_MODE, 0x00},
+ {MAX98927_R002F_ICC_TX_HIZ_EN_A, 0x00},
+ {MAX98927_R0030_ICC_TX_HIZ_EN_B, 0x00},
+ {MAX98927_R0031_ICC_LNK_EN, 0x00},
+ {MAX98927_R0032_PDM_TX_EN, 0x00},
+ {MAX98927_R0033_PDM_TX_HIZ_CTRL, 0x00},
+ {MAX98927_R0034_PDM_TX_CTRL, 0x00},
+ {MAX98927_R0035_PDM_RX_CTRL, 0x00},
+ {MAX98927_R0036_AMP_VOL_CTRL, 0x00},
+ {MAX98927_R0037_AMP_DSP_CFG, 0x02},
+ {MAX98927_R0038_TONE_GEN_DC_CFG, 0x00},
+ {MAX98927_R0039_DRE_CTRL, 0x01},
+ {MAX98927_R003A_AMP_EN, 0x00},
+ {MAX98927_R003B_SPK_SRC_SEL, 0x00},
+ {MAX98927_R003C_SPK_GAIN, 0x00},
+ {MAX98927_R003D_SSM_CFG, 0x01},
+ {MAX98927_R003E_MEAS_EN, 0x00},
+ {MAX98927_R003F_MEAS_DSP_CFG, 0x04},
+ {MAX98927_R0040_BOOST_CTRL0, 0x00},
+ {MAX98927_R0041_BOOST_CTRL3, 0x00},
+ {MAX98927_R0042_BOOST_CTRL1, 0x00},
+ {MAX98927_R0043_MEAS_ADC_CFG, 0x00},
+ {MAX98927_R0044_MEAS_ADC_BASE_MSB, 0x00},
+ {MAX98927_R0045_MEAS_ADC_BASE_LSB, 0x00},
+ {MAX98927_R0046_ADC_CH0_DIVIDE, 0x00},
+ {MAX98927_R0047_ADC_CH1_DIVIDE, 0x00},
+ {MAX98927_R0048_ADC_CH2_DIVIDE, 0x00},
+ {MAX98927_R0049_ADC_CH0_FILT_CFG, 0x00},
+ {MAX98927_R004A_ADC_CH1_FILT_CFG, 0x00},
+ {MAX98927_R004B_ADC_CH2_FILT_CFG, 0x00},
+ {MAX98927_R004C_MEAS_ADC_CH0_READ, 0x00},
+ {MAX98927_R004D_MEAS_ADC_CH1_READ, 0x00},
+ {MAX98927_R004E_MEAS_ADC_CH2_READ, 0x00},
+ {MAX98927_R0051_BROWNOUT_STATUS, 0x00},
+ {MAX98927_R0052_BROWNOUT_EN, 0x00},
+ {MAX98927_R0053_BROWNOUT_INFINITE_HOLD, 0x00},
+ {MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR, 0x00},
+ {MAX98927_R0055_BROWNOUT_LVL_HOLD, 0x00},
+ {MAX98927_R005A_BROWNOUT_LVL1_THRESH, 0x00},
+ {MAX98927_R005B_BROWNOUT_LVL2_THRESH, 0x00},
+ {MAX98927_R005C_BROWNOUT_LVL3_THRESH, 0x00},
+ {MAX98927_R005D_BROWNOUT_LVL4_THRESH, 0x00},
+ {MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS, 0x00},
+ {MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL, 0x00},
+ {MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL, 0x00},
+ {MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE, 0x00},
+ {MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT, 0x00},
+ {MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1, 0x00},
+ {MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2, 0x00},
+ {MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3, 0x00},
+ {MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT, 0x00},
+ {MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1, 0x00},
+ {MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2, 0x00},
+ {MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3, 0x00},
+ {MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT, 0x00},
+ {MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1, 0x00},
+ {MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2, 0x00},
+ {MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3, 0x00},
+ {MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT, 0x00},
+ {MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1, 0x00},
+ {MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2, 0x00},
+ {MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3, 0x00},
+ {MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM, 0x00},
+ {MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY, 0x00},
+ {MAX98927_R0084_ENV_TRACK_REL_RATE, 0x00},
+ {MAX98927_R0085_ENV_TRACK_HOLD_RATE, 0x00},
+ {MAX98927_R0086_ENV_TRACK_CTRL, 0x00},
+ {MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ, 0x00},
+ {MAX98927_R00FF_GLOBAL_SHDN, 0x00},
+ {MAX98927_R0100_SOFT_RESET, 0x00},
+ {MAX98927_R01FF_REV_ID, 0x40},
+};
+
+static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+ unsigned int mode = 0;
+ unsigned int invert = 0;
+
+ dev_dbg(codec->dev, "%s: fmt 0x%08X\n", __func__, fmt);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ mode = MAX98927_PCM_MASTER_MODE_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ max98927->master = true;
+ mode = MAX98927_PCM_MASTER_MODE_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ mode = MAX98927_PCM_MASTER_MODE_HYBRID;
+ default:
+ dev_err(codec->dev, "DAI clock mode unsupported");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0021_PCM_MASTER_MODE,
+ MAX98927_PCM_MASTER_MODE_MASK,
+ mode);
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ invert = MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE;
+ break;
+ default:
+ dev_err(codec->dev, "DAI invert mode unsupported");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0020_PCM_MODE_CFG,
+ MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE,
+ invert);
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ max98927->iface |= SND_SOC_DAIFMT_I2S;
+
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ max98927->iface |= SND_SOC_DAIFMT_LEFT_J;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0020_PCM_MODE_CFG,
+ max98927->iface, max98927->iface);
+
+ /* pcm channel configuration */
+ if (max98927->iface & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J))
+ regmap_write(max98927->regmap,
+ MAX98927_R0018_PCM_RX_EN_A,
+ MAX98927_PCM_RX_CH0_EN|
+ MAX98927_PCM_RX_CH1_EN);
+
+ return 0;
+}
+
+/* codec MCLK rate in master mode */
+static const int rate_table[] = {
+ 5644800, 6000000, 6144000, 6500000,
+ 9600000, 11289600, 12000000, 12288000,
+ 13000000, 19200000,
+};
+
+static int max98927_set_clock(struct max98927_priv *max98927,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_codec *codec = max98927->codec;
+ /* BCLK/LRCLK ratio calculation */
+ int blr_clk_ratio = params_channels(params) * max98927->ch_size;
+ int reg = MAX98927_R0022_PCM_CLK_SETUP;
+ int mask = MAX98927_PCM_CLK_SETUP_BSEL_MASK;
+ int value;
+
+ if (max98927->master) {
+ int i;
+ /* match rate to closest value */
+ for (i = 0; i < ARRAY_SIZE(rate_table); i++) {
+ if (rate_table[i] >= max98927->sysclk)
+ break;
+ }
+ if (i == ARRAY_SIZE(rate_table)) {
+ dev_err(codec->dev, "failed to find proper clock rate.\n");
+ return -EINVAL;
+ }
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0021_PCM_MASTER_MODE,
+ MAX98927_PCM_MASTER_MODE_MCLK_MASK,
+ i << MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT);
+ }
+
+ switch (blr_clk_ratio) {
+ case 32:
+ value = 2;
+ break;
+ case 48:
+ value = 3;
+ break;
+ case 64:
+ value = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+ regmap_update_bits(max98927->regmap, reg, mask, value);
+ return 0;
+}
+
+static int max98927_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+ unsigned int sampling_rate = 0;
+ unsigned int chan_sz = 0;
+
+ /* pcm mode configuration */
+ switch (snd_pcm_format_width(params_format(params))) {
+ case 16:
+ chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_16;
+ max98927->ch_size = 16;
+ break;
+ case 24:
+ chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_24;
+ max98927->ch_size = 24;
+ break;
+ case 32:
+ chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_32;
+ max98927->ch_size = 32;
+ break;
+ default:
+ dev_err(codec->dev, "format unsupported %d",
+ params_format(params));
+ goto err;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0020_PCM_MODE_CFG,
+ MAX98927_PCM_MODE_CFG_CHANSZ_MASK, chan_sz);
+
+ dev_dbg(codec->dev, "format supported %d",
+ params_format(params));
+
+ /* sampling rate configuration */
+ switch (params_rate(params)) {
+ case 8000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_8000;
+ break;
+ case 11025:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_11025;
+ break;
+ case 12000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_12000;
+ break;
+ case 16000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_16000;
+ break;
+ case 22050:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_22050;
+ break;
+ case 24000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_24000;
+ break;
+ case 32000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_32000;
+ break;
+ case 44100:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_44100;
+ break;
+ case 48000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_48000;
+ break;
+ default:
+ dev_err(codec->dev, "rate %d not supported\n",
+ params_rate(params));
+ goto err;
+ }
+ /* set DAI_SR to correct LRCLK frequency */
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0023_PCM_SR_SETUP1,
+ MAX98927_PCM_SR_SET1_SR_MASK,
+ sampling_rate);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0024_PCM_SR_SETUP2,
+ MAX98927_PCM_SR_SET2_SR_MASK,
+ sampling_rate << MAX98927_PCM_SR_SET2_SR_SHIFT);
+
+ /* set sampling rate of IV */
+ if (max98927->interleave_mode &&
+ sampling_rate > MAX98927_PCM_SR_SET1_SR_16000)
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0024_PCM_SR_SETUP2,
+ MAX98927_PCM_SR_SET2_IVADC_SR_MASK,
+ sampling_rate - 3);
+ else
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0024_PCM_SR_SETUP2,
+ MAX98927_PCM_SR_SET2_IVADC_SR_MASK,
+ sampling_rate);
+ return max98927_set_clock(max98927, params);
+err:
+ return -EINVAL;
+}
+
+#define MAX98927_RATES SNDRV_PCM_RATE_8000_48000
+
+#define MAX98927_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static int max98927_dai_set_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+
+ max98927->sysclk = freq;
+ return 0;
+}
+
+static const struct snd_soc_dai_ops max98927_dai_ops = {
+ .set_sysclk = max98927_dai_set_sysclk,
+ .set_fmt = max98927_dai_set_fmt,
+ .hw_params = max98927_dai_hw_params,
+};
+
+static int max98927_dac_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003A_AMP_EN,
+ MAX98927_AMP_EN_MASK, 1);
+ /* enable VMON and IMON */
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003E_MEAS_EN,
+ MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN,
+ MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R00FF_GLOBAL_SHDN,
+ MAX98927_GLOBAL_EN_MASK, 1);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R00FF_GLOBAL_SHDN,
+ MAX98927_GLOBAL_EN_MASK, 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003A_AMP_EN,
+ MAX98927_AMP_EN_MASK, 0);
+ /* disable VMON and IMON */
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003E_MEAS_EN,
+ MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN, 0);
+ break;
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+static const char * const max98927_switch_text[] = {
+ "Left", "Right", "LeftRight"};
+
+static const struct soc_enum dai_sel_enum =
+ SOC_ENUM_SINGLE(MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
+ MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT,
+ 3, max98927_switch_text);
+
+static const struct snd_kcontrol_new max98927_dai_controls =
+ SOC_DAPM_ENUM("DAI Sel", dai_sel_enum);
+
+static const struct snd_soc_dapm_widget max98927_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("DAI_OUT", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", MAX98927_R003A_AMP_EN,
+ 0, 0, max98927_dac_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0,
+ &max98927_dai_controls),
+ SND_SOC_DAPM_OUTPUT("BE_OUT"),
+};
+
+static DECLARE_TLV_DB_SCALE(max98927_spk_tlv, 300, 300, 0);
+static DECLARE_TLV_DB_SCALE(max98927_digital_tlv, -1600, 25, 0);
+
+static bool max98927_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX98927_R0001_INT_RAW1 ... MAX98927_R0028_ICC_RX_EN_B:
+ case MAX98927_R002B_ICC_TX_EN_A ... MAX98927_R002C_ICC_TX_EN_B:
+ case MAX98927_R002E_ICC_HIZ_MANUAL_MODE
+ ... MAX98927_R004E_MEAS_ADC_CH2_READ:
+ case MAX98927_R0051_BROWNOUT_STATUS
+ ... MAX98927_R0055_BROWNOUT_LVL_HOLD:
+ case MAX98927_R005A_BROWNOUT_LVL1_THRESH
+ ... MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE:
+ case MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT
+ ... MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ:
+ case MAX98927_R00FF_GLOBAL_SHDN:
+ case MAX98927_R0100_SOFT_RESET:
+ case MAX98927_R01FF_REV_ID:
+ return true;
+ }
+ return false;
+};
+
+static bool max98927_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX98927_R0001_INT_RAW1 ... MAX98927_R0009_INT_FLAG3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const char * const max98927_boost_voltage_text[] = {
+ "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V",
+ "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V",
+ "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V",
+ "9.5V", "9.625V", "9.75V", "9.875V", "10V"
+};
+
+static const char * const max98927_speaker_source_text[] = {
+ "i2s", "reserved", "tone", "pdm"
+};
+
+static const char * const max98927_monomix_output_text[] = {
+ "ch_0", "ch_1", "ch_1_2_div"
+};
+
+static SOC_ENUM_SINGLE_DECL(max98927_boost_voltage,
+ MAX98927_R0040_BOOST_CTRL0, 0,
+ max98927_boost_voltage_text);
+
+static SOC_ENUM_SINGLE_DECL(max98927_spk_source,
+ MAX98927_R003B_SPK_SRC_SEL, 0,
+ max98927_speaker_source_text);
+
+static SOC_ENUM_SINGLE_DECL(max98927_monomix_output,
+ MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
+ MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT,
+ max98927_monomix_output_text);
+
+static const struct snd_kcontrol_new max98927_snd_controls[] = {
+ SOC_SINGLE_TLV("Speaker Volume", MAX98927_R003C_SPK_GAIN,
+ 0, 6, 0,
+ max98927_spk_tlv),
+ SOC_SINGLE_TLV("Digital Gain", MAX98927_R0036_AMP_VOL_CTRL,
+ 0, (1<<MAX98927_AMP_VOL_WIDTH)-1, 0,
+ max98927_digital_tlv),
+ SOC_SINGLE("Amp DSP Enable", MAX98927_R0052_BROWNOUT_EN,
+ MAX98927_BROWNOUT_DSP_SHIFT, 1, 0),
+ SOC_SINGLE("Ramp Switch", MAX98927_R0037_AMP_DSP_CFG,
+ MAX98927_AMP_DSP_CFG_RMP_SHIFT, 1, 0),
+ SOC_SINGLE("DRE EN", MAX98927_R0039_DRE_CTRL,
+ MAX98927_DRE_EN_SHIFT, 1, 0),
+ SOC_SINGLE("Amp Volume Location", MAX98927_R0036_AMP_VOL_CTRL,
+ MAX98927_AMP_VOL_SEL_SHIFT, 1, 0),
+ SOC_ENUM("Boost Output Voltage", max98927_boost_voltage),
+ SOC_ENUM("Speaker Source", max98927_spk_source),
+ SOC_ENUM("Monomix Output", max98927_monomix_output),
+};
+
+static const struct snd_soc_dapm_route max98927_audio_map[] = {
+ {"Amp Enable", NULL, "DAI_OUT"},
+ {"DAI Sel Mux", "Left", "Amp Enable"},
+ {"DAI Sel Mux", "Right", "Amp Enable"},
+ {"DAI Sel Mux", "LeftRight", "Amp Enable"},
+ {"BE_OUT", NULL, "DAI Sel Mux"},
+};
+
+static struct snd_soc_dai_driver max98927_dai[] = {
+ {
+ .name = "max98927-aif1",
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = MAX98927_RATES,
+ .formats = MAX98927_FORMATS,
+ },
+ .capture = {
+ .stream_name = "HiFi Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = MAX98927_RATES,
+ .formats = MAX98927_FORMATS,
+ },
+ .ops = &max98927_dai_ops,
+ }
+};
+
+static int max98927_probe(struct snd_soc_codec *codec)
+{
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+ int ret = 0, reg = 0;
+
+ max98927->codec = codec;
+ codec->control_data = max98927->regmap;
+ codec->cache_bypass = 1;
+
+ /* Software Reset */
+ regmap_write(max98927->regmap,
+ MAX98927_R0100_SOFT_RESET, MAX98927_SOFT_RESET);
+
+ /* Check Revision ID */
+ ret = regmap_read(max98927->regmap,
+ MAX98927_R01FF_REV_ID, ®);
+ if (ret < 0)
+ dev_err(codec->dev,
+ "Failed to read: 0x%02X\n", MAX98927_R01FF_REV_ID);
+ else
+ dev_info(codec->dev,
+ "MAX98927 revisionID: 0x%02X\n", reg);
+
+ /* IV default slot configuration */
+ regmap_write(max98927->regmap,
+ MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
+ 0xFF);
+ regmap_write(max98927->regmap,
+ MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
+ 0xFF);
+ regmap_write(max98927->regmap,
+ MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
+ 0x80);
+ regmap_write(max98927->regmap,
+ MAX98927_R0026_PCM_TO_SPK_MONOMIX_B,
+ 0x1);
+ /* Set inital volume (+13dB) */
+ regmap_write(max98927->regmap,
+ MAX98927_R0036_AMP_VOL_CTRL,
+ 0x38);
+ regmap_write(max98927->regmap,
+ MAX98927_R003C_SPK_GAIN,
+ 0x05);
+ /* Enable DC blocker */
+ regmap_write(max98927->regmap,
+ MAX98927_R0037_AMP_DSP_CFG,
+ 0x03);
+ /* Enable IMON VMON DC blocker */
+ regmap_write(max98927->regmap,
+ MAX98927_R003F_MEAS_DSP_CFG,
+ 0xF7);
+ /* Boost Output Voltage & Current limit */
+ regmap_write(max98927->regmap,
+ MAX98927_R0040_BOOST_CTRL0,
+ 0x1C);
+ regmap_write(max98927->regmap,
+ MAX98927_R0042_BOOST_CTRL1,
+ 0x3E);
+ /* Measurement ADC config */
+ regmap_write(max98927->regmap,
+ MAX98927_R0043_MEAS_ADC_CFG,
+ 0x04);
+ regmap_write(max98927->regmap,
+ MAX98927_R0044_MEAS_ADC_BASE_MSB,
+ 0x00);
+ regmap_write(max98927->regmap,
+ MAX98927_R0045_MEAS_ADC_BASE_LSB,
+ 0x24);
+ /* Brownout Level */
+ regmap_write(max98927->regmap,
+ MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1,
+ 0x06);
+ /* Envelope Tracking configuration */
+ regmap_write(max98927->regmap,
+ MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM,
+ 0x08);
+ regmap_write(max98927->regmap,
+ MAX98927_R0086_ENV_TRACK_CTRL,
+ 0x01);
+ regmap_write(max98927->regmap,
+ MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ,
+ 0x10);
+
+ /* voltage, current slot configuration */
+ regmap_write(max98927->regmap,
+ MAX98927_R001E_PCM_TX_CH_SRC_A,
+ (max98927->i_l_slot<<MAX98927_PCM_TX_CH_SRC_A_I_SHIFT|
+ max98927->v_l_slot)&0xFF);
+
+ if (max98927->v_l_slot < 8) {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
+ 1 << max98927->v_l_slot, 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001A_PCM_TX_EN_A,
+ 1 << max98927->v_l_slot,
+ 1 << max98927->v_l_slot);
+ } else {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
+ 1 << (max98927->v_l_slot - 8), 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001B_PCM_TX_EN_B,
+ 1 << (max98927->v_l_slot - 8),
+ 1 << (max98927->v_l_slot - 8));
+ }
+
+ if (max98927->i_l_slot < 8) {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
+ 1 << max98927->i_l_slot, 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001A_PCM_TX_EN_A,
+ 1 << max98927->i_l_slot,
+ 1 << max98927->i_l_slot);
+ } else {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
+ 1 << (max98927->i_l_slot - 8), 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001B_PCM_TX_EN_B,
+ 1 << (max98927->i_l_slot - 8),
+ 1 << (max98927->i_l_slot - 8));
+ }
+
+ /* Set interleave mode */
+ if (max98927->interleave_mode)
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001F_PCM_TX_CH_SRC_B,
+ MAX98927_PCM_TX_CH_INTERLEAVE_MASK,
+ MAX98927_PCM_TX_CH_INTERLEAVE_MASK);
+ return ret;
+}
+
+static const struct snd_soc_codec_driver soc_codec_dev_max98927 = {
+ .probe = max98927_probe,
+ .component_driver = {
+ .controls = max98927_snd_controls,
+ .num_controls = ARRAY_SIZE(max98927_snd_controls),
+ .dapm_widgets = max98927_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(max98927_dapm_widgets),
+ .dapm_routes = max98927_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(max98927_audio_map),
+ },
+};
+
+static const struct regmap_config max98927_regmap = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = MAX98927_R01FF_REV_ID,
+ .reg_defaults = max98927_reg,
+ .num_reg_defaults = ARRAY_SIZE(max98927_reg),
+ .readable_reg = max98927_readable_register,
+ .volatile_reg = max98927_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static void max98927_slot_config(struct i2c_client *i2c,
+ struct max98927_priv *max98927)
+{
+ int value;
+
+ if (!of_property_read_u32(i2c->dev.of_node,
+ "vmon-slot-no", &value))
+ max98927->v_l_slot = value & 0xF;
+ else
+ max98927->v_l_slot = 0;
+ if (!of_property_read_u32(i2c->dev.of_node,
+ "imon-slot-no", &value))
+ max98927->i_l_slot = value & 0xF;
+ else
+ max98927->i_l_slot = 1;
+}
+
+static int max98927_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+
+ int ret = 0, value;
+ struct max98927_priv *max98927 = NULL;
+
+ max98927 = devm_kzalloc(&i2c->dev,
+ sizeof(*max98927), GFP_KERNEL);
+
+ if (!max98927) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ i2c_set_clientdata(i2c, max98927);
+
+ /* update interleave mode info */
+ if (!of_property_read_u32(i2c->dev.of_node,
+ "interleave_mode", &value)) {
+ if (value > 0)
+ max98927->interleave_mode = 1;
+ else
+ max98927->interleave_mode = 0;
+ } else
+ max98927->interleave_mode = 0;
+
+ /* regmap initialization */
+ max98927->regmap
+ = devm_regmap_init_i2c(i2c, &max98927_regmap);
+ if (IS_ERR(max98927->regmap)) {
+ ret = PTR_ERR(max98927->regmap);
+ dev_err(&i2c->dev,
+ "Failed to allocate regmap: %d\n", ret);
+ goto err;
+ }
+
+ /* voltage/current slot configuration */
+ max98927_slot_config(i2c, max98927);
+
+ /* codec registeration */
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_max98927,
+ max98927_dai, ARRAY_SIZE(max98927_dai));
+ if (ret < 0)
+ dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
+
+ return ret;
+
+err:
+ if (max98927)
+ devm_kfree(&i2c->dev, max98927);
+ return ret;
+}
+
+static int max98927_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ return 0;
+}
+
+static const struct i2c_device_id max98927_i2c_id[] = {
+ { "max98927", 0},
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, max98927_i2c_id);
+
+#if defined(CONFIG_OF)
+static const struct of_device_id max98927_of_match[] = {
+ { .compatible = "maxim,max98927", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max98927_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max98927_acpi_match[] = {
+ { "MX98927", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, max98927_acpi_match);
+#endif
+
+static struct i2c_driver max98927_i2c_driver = {
+ .driver = {
+ .name = "max98927",
+ .of_match_table = of_match_ptr(max98927_of_match),
+ .acpi_match_table = ACPI_PTR(max98927_acpi_match),
+ .pm = NULL,
+ },
+ .probe = max98927_i2c_probe,
+ .remove = max98927_i2c_remove,
+ .id_table = max98927_i2c_id,
+};
+
+module_i2c_driver(max98927_i2c_driver)
+
+MODULE_DESCRIPTION("ALSA SoC MAX98927 driver");
+MODULE_AUTHOR("Ryan Lee <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h
new file mode 100755
index 0000000..e13e18a
--- /dev/null
+++ b/sound/soc/codecs/max98927.h
@@ -0,0 +1,267 @@
+/*
+ * max98927.h -- MAX98927 ALSA Soc Audio driver
+ *
+ * Copyright 2013-15 Maxim Integrated Products
+ * Author: Ryan Lee <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef _MAX98927_H
+#define _MAX98927_H
+
+/* Register Values */
+#define MAX98927_R0001_INT_RAW1 0x0001
+#define MAX98927_R0002_INT_RAW2 0x0002
+#define MAX98927_R0003_INT_RAW3 0x0003
+#define MAX98927_R0004_INT_STATE1 0x0004
+#define MAX98927_R0005_INT_STATE2 0x0005
+#define MAX98927_R0006_INT_STATE3 0x0006
+#define MAX98927_R0007_INT_FLAG1 0x0007
+#define MAX98927_R0008_INT_FLAG2 0x0008
+#define MAX98927_R0009_INT_FLAG3 0x0009
+#define MAX98927_R000A_INT_EN1 0x000A
+#define MAX98927_R000B_INT_EN2 0x000B
+#define MAX98927_R000C_INT_EN3 0x000C
+#define MAX98927_R000D_INT_FLAG_CLR1 0x000D
+#define MAX98927_R000E_INT_FLAG_CLR2 0x000E
+#define MAX98927_R000F_INT_FLAG_CLR3 0x000F
+#define MAX98927_R0010_IRQ_CTRL 0x0010
+#define MAX98927_R0011_CLK_MON 0x0011
+#define MAX98927_R0012_WDOG_CTRL 0x0012
+#define MAX98927_R0013_WDOG_RST 0x0013
+#define MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH 0x0014
+#define MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH 0x0015
+#define MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS 0x0016
+#define MAX98927_R0017_PIN_CFG 0x0017
+#define MAX98927_R0018_PCM_RX_EN_A 0x0018
+#define MAX98927_R0019_PCM_RX_EN_B 0x0019
+#define MAX98927_R001A_PCM_TX_EN_A 0x001A
+#define MAX98927_R001B_PCM_TX_EN_B 0x001B
+#define MAX98927_R001C_PCM_TX_HIZ_CTRL_A 0x001C
+#define MAX98927_R001D_PCM_TX_HIZ_CTRL_B 0x001D
+#define MAX98927_R001E_PCM_TX_CH_SRC_A 0x001E
+#define MAX98927_R001F_PCM_TX_CH_SRC_B 0x001F
+#define MAX98927_R0020_PCM_MODE_CFG 0x0020
+#define MAX98927_R0021_PCM_MASTER_MODE 0x0021
+#define MAX98927_R0022_PCM_CLK_SETUP 0x0022
+#define MAX98927_R0023_PCM_SR_SETUP1 0x0023
+#define MAX98927_R0024_PCM_SR_SETUP2 0x0024
+#define MAX98927_R0025_PCM_TO_SPK_MONOMIX_A 0x0025
+#define MAX98927_R0026_PCM_TO_SPK_MONOMIX_B 0x0026
+#define MAX98927_R0027_ICC_RX_EN_A 0x0027
+#define MAX98927_R0028_ICC_RX_EN_B 0x0028
+#define MAX98927_R002B_ICC_TX_EN_A 0x002B
+#define MAX98927_R002C_ICC_TX_EN_B 0x002C
+#define MAX98927_R002E_ICC_HIZ_MANUAL_MODE 0x002E
+#define MAX98927_R002F_ICC_TX_HIZ_EN_A 0x002F
+#define MAX98927_R0030_ICC_TX_HIZ_EN_B 0x0030
+#define MAX98927_R0031_ICC_LNK_EN 0x0031
+#define MAX98927_R0032_PDM_TX_EN 0x0032
+#define MAX98927_R0033_PDM_TX_HIZ_CTRL 0x0033
+#define MAX98927_R0034_PDM_TX_CTRL 0x0034
+#define MAX98927_R0035_PDM_RX_CTRL 0x0035
+#define MAX98927_R0036_AMP_VOL_CTRL 0x0036
+#define MAX98927_R0037_AMP_DSP_CFG 0x0037
+#define MAX98927_R0038_TONE_GEN_DC_CFG 0x0038
+#define MAX98927_R0039_DRE_CTRL 0x0039
+#define MAX98927_R003A_AMP_EN 0x003A
+#define MAX98927_R003B_SPK_SRC_SEL 0x003B
+#define MAX98927_R003C_SPK_GAIN 0x003C
+#define MAX98927_R003D_SSM_CFG 0x003D
+#define MAX98927_R003E_MEAS_EN 0x003E
+#define MAX98927_R003F_MEAS_DSP_CFG 0x003F
+#define MAX98927_R0040_BOOST_CTRL0 0x0040
+#define MAX98927_R0041_BOOST_CTRL3 0x0041
+#define MAX98927_R0042_BOOST_CTRL1 0x0042
+#define MAX98927_R0043_MEAS_ADC_CFG 0x0043
+#define MAX98927_R0044_MEAS_ADC_BASE_MSB 0x0044
+#define MAX98927_R0045_MEAS_ADC_BASE_LSB 0x0045
+#define MAX98927_R0046_ADC_CH0_DIVIDE 0x0046
+#define MAX98927_R0047_ADC_CH1_DIVIDE 0x0047
+#define MAX98927_R0048_ADC_CH2_DIVIDE 0x0048
+#define MAX98927_R0049_ADC_CH0_FILT_CFG 0x0049
+#define MAX98927_R004A_ADC_CH1_FILT_CFG 0x004A
+#define MAX98927_R004B_ADC_CH2_FILT_CFG 0x004B
+#define MAX98927_R004C_MEAS_ADC_CH0_READ 0x004C
+#define MAX98927_R004D_MEAS_ADC_CH1_READ 0x004D
+#define MAX98927_R004E_MEAS_ADC_CH2_READ 0x004E
+#define MAX98927_R0051_BROWNOUT_STATUS 0x0051
+#define MAX98927_R0052_BROWNOUT_EN 0x0052
+#define MAX98927_R0053_BROWNOUT_INFINITE_HOLD 0x0053
+#define MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR 0x0054
+#define MAX98927_R0055_BROWNOUT_LVL_HOLD 0x0055
+#define MAX98927_R005A_BROWNOUT_LVL1_THRESH 0x005A
+#define MAX98927_R005B_BROWNOUT_LVL2_THRESH 0x005B
+#define MAX98927_R005C_BROWNOUT_LVL3_THRESH 0x005C
+#define MAX98927_R005D_BROWNOUT_LVL4_THRESH 0x005D
+#define MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS 0x005E
+#define MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL 0x005F
+#define MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL 0x0060
+#define MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE 0x0061
+#define MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT 0x0072
+#define MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1 0x0073
+#define MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2 0x0074
+#define MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3 0x0075
+#define MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT 0x0076
+#define MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1 0x0077
+#define MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2 0x0078
+#define MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3 0x0079
+#define MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT 0x007A
+#define MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1 0x007B
+#define MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2 0x007C
+#define MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3 0x007D
+#define MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT 0x007E
+#define MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1 0x007F
+#define MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2 0x0080
+#define MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3 0x0081
+#define MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM 0x0082
+#define MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY 0x0083
+#define MAX98927_R0084_ENV_TRACK_REL_RATE 0x0084
+#define MAX98927_R0085_ENV_TRACK_HOLD_RATE 0x0085
+#define MAX98927_R0086_ENV_TRACK_CTRL 0x0086
+#define MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ 0x0087
+#define MAX98927_R00FF_GLOBAL_SHDN 0x00FF
+#define MAX98927_R0100_SOFT_RESET 0x0100
+#define MAX98927_R01FF_REV_ID 0x01FF
+
+/* MAX98927_R0018_PCM_RX_EN_A */
+#define MAX98927_PCM_RX_CH0_EN (0x1 << 0)
+#define MAX98927_PCM_RX_CH1_EN (0x1 << 1)
+#define MAX98927_PCM_RX_CH2_EN (0x1 << 2)
+#define MAX98927_PCM_RX_CH3_EN (0x1 << 3)
+#define MAX98927_PCM_RX_CH4_EN (0x1 << 4)
+#define MAX98927_PCM_RX_CH5_EN (0x1 << 5)
+#define MAX98927_PCM_RX_CH6_EN (0x1 << 6)
+#define MAX98927_PCM_RX_CH7_EN (0x1 << 7)
+
+/* MAX98927_R001A_PCM_TX_EN_A */
+#define MAX98927_PCM_TX_CH0_EN (0x1 << 0)
+#define MAX98927_PCM_TX_CH1_EN (0x1 << 1)
+#define MAX98927_PCM_TX_CH2_EN (0x1 << 2)
+#define MAX98927_PCM_TX_CH3_EN (0x1 << 3)
+#define MAX98927_PCM_TX_CH4_EN (0x1 << 4)
+#define MAX98927_PCM_TX_CH5_EN (0x1 << 5)
+#define MAX98927_PCM_TX_CH6_EN (0x1 << 6)
+#define MAX98927_PCM_TX_CH7_EN (0x1 << 7)
+
+/* MAX98927_R001E_PCM_TX_CH_SRC_A */
+#define MAX98927_PCM_TX_CH_SRC_A_V_SHIFT (0)
+#define MAX98927_PCM_TX_CH_SRC_A_I_SHIFT (4)
+
+/* MAX98927_R001F_PCM_TX_CH_SRC_B */
+#define MAX98927_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 5)
+
+/* MAX98927_R0020_PCM_MODE_CFG */
+#define MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2)
+#define MAX98927_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3)
+
+#define MAX98927_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6)
+#define MAX98927_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6)
+#define MAX98927_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6)
+#define MAX98927_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6)
+
+/* MAX98927_R0021_PCM_MASTER_MODE */
+#define MAX98927_PCM_MASTER_MODE_MASK (0x3 << 0)
+#define MAX98927_PCM_MASTER_MODE_SLAVE (0x0 << 0)
+#define MAX98927_PCM_MASTER_MODE_MASTER (0x3 << 0)
+#define MAX98927_PCM_MASTER_MODE_HYBRID (0x1 << 0)
+
+#define MAX98927_PCM_MASTER_MODE_MCLK_MASK (0xF << 2)
+#define MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2)
+
+/* MAX98927_R0022_PCM_CLK_SETUP */
+#define MAX98927_PCM_CLK_SETUP_BSEL_MASK (0xF << 0)
+
+/* MAX98927_R0023_PCM_SR_SETUP1 */
+#define MAX98927_PCM_SR_SET1_SR_MASK (0xF << 0)
+
+#define MAX98927_PCM_SR_SET1_SR_8000 (0x0 << 0)
+#define MAX98927_PCM_SR_SET1_SR_11025 (0x1 << 0)
+#define MAX98927_PCM_SR_SET1_SR_12000 (0x2 << 0)
+#define MAX98927_PCM_SR_SET1_SR_16000 (0x3 << 0)
+#define MAX98927_PCM_SR_SET1_SR_22050 (0x4 << 0)
+#define MAX98927_PCM_SR_SET1_SR_24000 (0x5 << 0)
+#define MAX98927_PCM_SR_SET1_SR_32000 (0x6 << 0)
+#define MAX98927_PCM_SR_SET1_SR_44100 (0x7 << 0)
+#define MAX98927_PCM_SR_SET1_SR_48000 (0x8 << 0)
+
+/* MAX98927_R0024_PCM_SR_SETUP2 */
+#define MAX98927_PCM_SR_SET2_SR_MASK (0xF << 4)
+#define MAX98927_PCM_SR_SET2_SR_SHIFT (4)
+#define MAX98927_PCM_SR_SET2_IVADC_SR_MASK (0xf << 0)
+
+/* MAX98927_R0025_PCM_TO_SPK_MONOMIX_A */
+#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6)
+#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6)
+
+/* MAX98927_R0036_AMP_VOL_CTRL */
+#define MAX98927_AMP_VOL_SEL (0x1 << 7)
+#define MAX98927_AMP_VOL_SEL_WIDTH (1)
+#define MAX98927_AMP_VOL_SEL_SHIFT (7)
+#define MAX98927_AMP_VOL_MASK (0x7f << 0)
+#define MAX98927_AMP_VOL_WIDTH (7)
+#define MAX98927_AMP_VOL_SHIFT (0)
+
+/* MAX98927_R0037_AMP_DSP_CFG */
+#define MAX98927_AMP_DSP_CFG_DCBLK_EN (0x1 << 0)
+#define MAX98927_AMP_DSP_CFG_DITH_EN (0x1 << 1)
+#define MAX98927_AMP_DSP_CFG_RMP_BYPASS (0x1 << 4)
+#define MAX98927_AMP_DSP_CFG_DAC_INV (0x1 << 5)
+#define MAX98927_AMP_DSP_CFG_RMP_SHIFT (4)
+
+/* MAX98927_R0039_DRE_CTRL */
+#define MAX98927_DRE_CTRL_DRE_EN (0x1 << 0)
+#define MAX98927_DRE_EN_SHIFT 0x1
+
+/* MAX98927_R003A_AMP_EN */
+#define MAX98927_AMP_EN_MASK (0x1 << 0)
+
+/* MAX98927_R003B_SPK_SRC_SEL */
+#define MAX98927_SPK_SRC_MASK (0x3 << 0)
+
+/* MAX98927_R003C_SPK_GAIN */
+#define MAX98927_SPK_PCM_GAIN_MASK (0x7 << 0)
+#define MAX98927_SPK_PDM_GAIN_MASK (0x7 << 4)
+#define MAX98927_SPK_GAIN_WIDTH (3)
+
+/* MAX98927_R003E_MEAS_EN */
+#define MAX98927_MEAS_V_EN (0x1 << 0)
+#define MAX98927_MEAS_I_EN (0x1 << 1)
+
+/* MAX98927_R0040_BOOST_CTRL0 */
+#define MAX98927_BOOST_CTRL0_VOUT_MASK (0x1f << 0)
+#define MAX98927_BOOST_CTRL0_PVDD_MASK (0x1 << 7)
+#define MAX98927_BOOST_CTRL0_PVDD_EN_SHIFT (7)
+
+/* MAX98927_R0052_BROWNOUT_EN */
+#define MAX98927_BROWNOUT_BDE_EN (0x1 << 0)
+#define MAX98927_BROWNOUT_AMP_EN (0x1 << 1)
+#define MAX98927_BROWNOUT_DSP_EN (0x1 << 2)
+#define MAX98927_BROWNOUT_DSP_SHIFT (2)
+
+/* MAX98927_R0100_SOFT_RESET */
+#define MAX98927_SOFT_RESET (0x1 << 0)
+
+/* MAX98927_R00FF_GLOBAL_SHDN */
+#define MAX98927_GLOBAL_EN_MASK (0x1 << 0)
+
+struct max98927_priv {
+ struct regmap *regmap;
+ struct snd_soc_codec *codec;
+ struct max98927_pdata *pdata;
+ unsigned int spk_gain;
+ unsigned int sysclk;
+ unsigned int v_l_slot;
+ unsigned int i_l_slot;
+ bool interleave_mode;
+ unsigned int ch_size;
+ unsigned int rate;
+ unsigned int iface;
+ unsigned int master;
+ unsigned int digital_gain;
+};
+#endif
--
2.7.4
On Wed, Mar 29, 2017 at 09:53:48AM +0900, Ryan Lee wrote:
> + case SND_SOC_DAIFMT_CBS_CFM:
> + mode = MAX98927_PCM_MASTER_MODE_HYBRID;
> + default:
> + dev_err(codec->dev, "DAI clock mode unsupported");
Either we don't support _CBS_CFM or there's a missing break there.
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S:
> + max98927->iface |= SND_SOC_DAIFMT_I2S;
> +
> + break;
Please use the kernel coding style as you do in the rest of this
function.
> + int reg = MAX98927_R0022_PCM_CLK_SETUP;
> + int mask = MAX98927_PCM_CLK_SETUP_BSEL_MASK;
> + regmap_update_bits(max98927->regmap, reg, mask, value);
reg and mask have exactly one user (as you'd expect), just use the
constants directly here to make things clearer.
> + switch (snd_pcm_format_width(params_format(params))) {
> + case 16:
> + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_16;
> + max98927->ch_size = 16;
You could just assign ch_size directly.
> + /* sampling rate configuration */
> + switch (params_rate(params)) {
> + case 8000:
> + sampling_rate |= MAX98927_PCM_SR_SET1_SR_8000;
sampling_rate is only ever set to a real value in this switch statement,
you're not oring with anything else so you can just use an assignment
which would be a lot clearer (it's not obvious what else might go in
there) and the initial assignment to 0 for this and chan_sz can only
mask errors.
> + /* set sampling rate of IV */
> + if (max98927->interleave_mode &&
> + sampling_rate > MAX98927_PCM_SR_SET1_SR_16000)
> + regmap_update_bits(max98927->regmap,
Please use the kernel coding style, indent the second line of the if
with the ( so that it doesn't look like part of the conditional code.
> + switch (reg) {
> + case MAX98927_R0001_INT_RAW1 ... MAX98927_R0028_ICC_RX_EN_B:
> + return true;
> + }
> + return false;
It'd be clearer to put the return false in the switch statement like the
return true, and also consistent with the _volatile_reg() function.
> +static const char * const max98927_speaker_source_text[] = {
> + "i2s", "reserved", "tone", "pdm"
> +};
This looks like it should be a DAPM control.
> +static const char * const max98927_monomix_output_text[] = {
> + "ch_0", "ch_1", "ch_1_2_div"
> +};
Similarly here.
> + SOC_SINGLE_TLV("Digital Gain", MAX98927_R0036_AMP_VOL_CTRL,
> + 0, (1<<MAX98927_AMP_VOL_WIDTH)-1, 0,
> + max98927_digital_tlv),
All volume controls should end with Volume as per control-names.rst.
> + SOC_SINGLE("Amp DSP Enable", MAX98927_R0052_BROWNOUT_EN,
> + MAX98927_BROWNOUT_DSP_SHIFT, 1, 0),
All on/off switches should end with Switch as per control-names.rst.
> +static int max98927_probe(struct snd_soc_codec *codec)
> +{
> + /* Check Revision ID */
> + ret = regmap_read(max98927->regmap,
> + MAX98927_R01FF_REV_ID, ®);
Basic device identification and setup should be done at the chip level
probe not at the CODEC level so that if there are problems we fail as
early as possible and so that diagnostic information is available to
users as soon as possible, even if there's no sound card for the device
in the system.
> + /* Set inital volume (+13dB) */
As with all other CODEC drivers you should leave the hardware defaults
alone, what makes sense for your system may not make sense for other
systems and the hardware defaults are a fixed thing.
> + /* Boost Output Voltage & Current limit */
> + regmap_write(max98927->regmap,
> + MAX98927_R0040_BOOST_CTRL0,
> + 0x1C);
> + regmap_write(max98927->regmap,
> + MAX98927_R0042_BOOST_CTRL1,
> + 0x3E);
This should be system specific, these values might be unsafe in some
systems.
> +err:
> + if (max98927)
> + devm_kfree(&i2c->dev, max98927);
There is no need to explicitly free devm_ allocated memory, that's the
point of devm.
On Wed, Mar 29, 2017 at 7:23 AM, Mark Brown <[email protected]> wrote:
> On Wed, Mar 29, 2017 at 09:53:48AM +0900, Ryan Lee wrote:
>
>> + case SND_SOC_DAIFMT_CBS_CFM:
>> + mode = MAX98927_PCM_MASTER_MODE_HYBRID;
>> + default:
>> + dev_err(codec->dev, "DAI clock mode unsupported");
>
> Either we don't support _CBS_CFM or there's a missing break there.
This was removed since CVS_CFM is not supported.
>
>> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>> + case SND_SOC_DAIFMT_I2S:
>> + max98927->iface |= SND_SOC_DAIFMT_I2S;
>> +
>> + break;
>
> Please use the kernel coding style as you do in the rest of this
> function.
Modified as requested.
>
>> + int reg = MAX98927_R0022_PCM_CLK_SETUP;
>> + int mask = MAX98927_PCM_CLK_SETUP_BSEL_MASK;
>
>> + regmap_update_bits(max98927->regmap, reg, mask, value);
>
> reg and mask have exactly one user (as you'd expect), just use the
> constants directly here to make things clearer.
Removed reg and mask.
>
>> + switch (snd_pcm_format_width(params_format(params))) {
>> + case 16:
>> + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_16;
>> + max98927->ch_size = 16;
>
> You could just assign ch_size directly.
Sorry I don't fully understand this.
Anyway 'ch_size' will be directly updated from snd_pcm_format_width
information after modification.
>
>> + /* sampling rate configuration */
>> + switch (params_rate(params)) {
>> + case 8000:
>> + sampling_rate |= MAX98927_PCM_SR_SET1_SR_8000;
>
> sampling_rate is only ever set to a real value in this switch statement,
> you're not oring with anything else so you can just use an assignment
> which would be a lot clearer (it's not obvious what else might go in
> there) and the initial assignment to 0 for this and chan_sz can only
> mask errors.
Removed 'oring'.
>
>> + /* set sampling rate of IV */
>> + if (max98927->interleave_mode &&
>> + sampling_rate > MAX98927_PCM_SR_SET1_SR_16000)
>> + regmap_update_bits(max98927->regmap,
>
> Please use the kernel coding style, indent the second line of the if
> with the ( so that it doesn't look like part of the conditional code.
Modified as requested.
>
>> + switch (reg) {
>> + case MAX98927_R0001_INT_RAW1 ... MAX98927_R0028_ICC_RX_EN_B:
>
>
>> + return true;
>> + }
>> + return false;
>
> It'd be clearer to put the return false in the switch statement like the
> return true, and also consistent with the _volatile_reg() function.
Modified as requested.
>
>> +static const char * const max98927_speaker_source_text[] = {
>> + "i2s", "reserved", "tone", "pdm"
>> +};
>
> This looks like it should be a DAPM control.
Removed this and added it to 'dai_set_format' function.
>
>> +static const char * const max98927_monomix_output_text[] = {
>> + "ch_0", "ch_1", "ch_1_2_div"
>> +};
>
> Similarly here.
Removed this since it was already added to DAPM control.
>
>> + SOC_SINGLE_TLV("Digital Gain", MAX98927_R0036_AMP_VOL_CTRL,
>> + 0, (1<<MAX98927_AMP_VOL_WIDTH)-1, 0,
>> + max98927_digital_tlv),
>
> All volume controls should end with Volume as per control-names.rst.
Modified as requested.
>
>> + SOC_SINGLE("Amp DSP Enable", MAX98927_R0052_BROWNOUT_EN,
>> + MAX98927_BROWNOUT_DSP_SHIFT, 1, 0),
>
> All on/off switches should end with Switch as per control-names.rst.
Modified as requested.
>
>> +static int max98927_probe(struct snd_soc_codec *codec)
>> +{
>
>> + /* Check Revision ID */
>> + ret = regmap_read(max98927->regmap,
>> + MAX98927_R01FF_REV_ID, ®);
>
> Basic device identification and setup should be done at the chip level
> probe not at the CODEC level so that if there are problems we fail as
> early as possible and so that diagnostic information is available to
> users as soon as possible, even if there's no sound card for the device
> in the system.
Moved to i2c_probe function.
>
>> + /* Set inital volume (+13dB) */
>
> As with all other CODEC drivers you should leave the hardware defaults
> alone, what makes sense for your system may not make sense for other
> systems and the hardware defaults are a fixed thing.
We recommend to use static +13dB gain when our speaker protection
algorithm is running on DSP. It is not hardware default but mostly
+13dB is being used as default.
>
>> + /* Boost Output Voltage & Current limit */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0040_BOOST_CTRL0,
>> + 0x1C);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0042_BOOST_CTRL1,
>> + 0x3E);
>
> This should be system specific, these values might be unsafe in some
> systems.
Same as above, most user will use maximum voltage & current limit
value to take advantage of 10V boost amplifier.
I added one more control to change the current limit value.
>
>> +err:
>> + if (max98927)
>> + devm_kfree(&i2c->dev, max98927);
>
> There is no need to explicitly free devm_ allocated memory, that's the
> point of devm.
Removed the code.