What is UBSAN?
Mmm, I got something similar but I upgraded and now I get:
[ 53.857635]
================================================================================
[ 53.866267] UBSAN: array-index-out-of-bounds in
/build/linux-raspi-9eKTPI/linux-raspi-5.15.0/net/mac80211/airtime.c:460:47
[ 53.877535] index 15 is out of range for type 'u16 [12]'
[ 53.882952] CPU: 3 PID: 104 Comm: kworker/u8:1 Tainted: G C
5.15.0-1006-raspi #6-Ubuntu
[ 53.882961] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 53.882965] Workqueue: mt76 mt76u_tx_status_data [mt76_usb]
[ 53.882990] Call trace:
[ 53.882992] dump_backtrace+0x0/0x1f0
[ 53.883001] show_stack+0x24/0x30
[ 53.883006] dump_stack_lvl+0x8c/0xb8
[ 53.883011] dump_stack+0x18/0x34
[ 53.883015] ubsan_epilogue+0x10/0x54
[ 53.883019] __ubsan_handle_out_of_bounds+0x80/0x90
[ 53.883026] ieee80211_get_rate_duration.constprop.0+0x218/0x290
[mac80211]
[ 53.883162] ieee80211_calc_rx_airtime+0xfc/0x160 [mac80211]
[ 53.883251] ieee80211_calc_tx_airtime+0xd0/0x110 [mac80211]
[ 53.883338] mt76x02_send_tx_status+0x17c/0x390 [mt76x02_lib]
[ 53.883360] mt76x02_tx_status_data+0x5c/0x90 [mt76x02_lib]
[ 53.883377] mt76u_tx_status_data+0x88/0x110 [mt76_usb]
[ 53.883386] process_one_work+0x204/0x4c0
[ 53.883396] worker_thread+0x144/0x470
[ 53.883401] kthread+0x12c/0x140
[ 53.883407] ret_from_fork+0x10/0x20
[ 53.883428]
================================================================================
ubuntu server 5.15.0-1006-raspi
I was getting:
[ 25.597319]
================================================================================
[ 25.597344] UBSAN: invalid-load in
/build/linux-raspi-9r6HWT/linux-raspi-5.15.0/net/mac80211/status.c:1164:21
[ 25.597367] load of value 255 is not a valid value for type '_Bool'
[ 25.597382] CPU: 0 PID: 105 Comm: kworker/u8:2 Tainted: G C
5.15.0-1005-raspi #5-Ubuntu
[ 25.597397] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 25.597406] Workqueue: phy0 mt76x02_mac_work [mt76x02_lib]
[ 25.597472] Call trace:
[ 25.597477] dump_backtrace+0x0/0x1f0
[ 25.597496] show_stack+0x24/0x30
[ 25.597507] dump_stack_lvl+0x8c/0xb8
[ 25.597520] dump_stack+0x18/0x34
[ 25.597530] ubsan_epilogue+0x10/0x54
[ 25.597539] __ubsan_handle_load_invalid_value+0x80/0x90
[ 25.597553] ieee80211_tx_status_ext+0x54c/0x550 [mac80211]
[ 25.597800] mt76_tx_status_unlock+0x100/0x160 [mt76]
[ 25.597854] mt76_tx_status_check+0x74/0xa4 [mt76]
[ 25.597900] mt76x02_mac_work+0x174/0x2ac [mt76x02_lib]
[ 25.597943] process_one_work+0x204/0x4c0
[ 25.597958] worker_thread+0x144/0x470
[ 25.597970] kthread+0x12c/0x140
[ 25.597981] ret_from_fork+0x10/0x20
[ 25.597996]
================================================================================
Everything seems to work.
On 2022-05-05 02:29, Gonsolo wrote:
> Hi all.
>
> After a resume I get the following error:
>
> +0,000007] UBSAN: invalid-load in
> /build/linux-lowlatency-fSdu7c/linux-lowlatency-5.15.0/net/mac80211/status.c:1164:21
> [ +0,000004] load of value 255 is not a valid value for type '_Bool'
> [ +0,000004] CPU: 22 PID: 387 Comm: kworker/u256:5 Tainted: P
> OE 5.15.0-27-lowlatency #28-Ubuntu
> [ +0,000004] Hardware name: To Be Filled By O.E.M. To Be Filled By
> O.E.M./X399 Phantom Gaming 6, BIOS P1.31 01/14/2021
> [ +0,000003] Workqueue: phy0 mt76x02_mac_work [mt76x02_lib]
> [ +0,000014] Call Trace:
> [ +0,000003] <TASK>
> [ +0,000003] show_stack+0x52/0x58
> [ +0,000006] dump_stack_lvl+0x4a/0x5f
> [ +0,000007] dump_stack+0x10/0x12
> [ +0,000003] ubsan_epilogue+0x9/0x45
> [ +0,000002] __ubsan_handle_load_invalid_value.cold+0x44/0x49
> [ +0,000004] ieee80211_tx_status_ext.cold+0x4e/0x5f [mac80211]
> [ +0,000068] mt76_tx_status_unlock+0x111/0x160 [mt76]
> [ +0,000010] mt76_tx_status_check+0x68/0x90 [mt76]
> [ +0,000009] mt76x02_mac_work+0x14b/0x240 [mt76x02_lib]
> [ +0,000008] process_one_work+0x222/0x3f0
> [ +0,000006] worker_thread+0x50/0x3f0
> [ +0,000004] ? process_one_work+0x3f0/0x3f0
> [ +0,000004] kthread+0x13b/0x160
> [ +0,000003] ? set_kthread_struct+0x50/0x50
> [ +0,000004] ret_from_fork+0x22/0x30
> [ +0,000006] </TASK>
> [ +0,000001] ================================================================================
>
> This is a stock Ubuntu Jammy lowlatency kernel (with Nvidia drivers).
>
> I would be happy to provide all the needed information to resolve this.
>
> I also want to note that the device is running quite unstable (lots of
> deauthenticating, network lost, etc...).
>
> Regards,
> g
> What is UBSAN?
https://www.kernel.org/doc/html/v4.19/dev-tools/ubsan.html
It seems to be included in my kernel.
Best regards,
g