From: Martin Nordholts <[email protected]>
Hello,
I have looked into solving the "touchpad/touchscreen not working on
boot"-problem on Chromebook Pixel, see for example Brock Tice's last
comment on https://plus.google.com/+LinusTorvalds/posts/1iFsBWBqoYY
I have seen Olof's attempt at a fix:
[PATCH] Platform: x86: chromeos_laptop: defer probing if no i2c busses found
https://lkml.org/lkml/2013/4/18/556
At first, I tried Olofs suggestion at the end of the thread, namely to
do bus_register_notifier() on i2c_bus_type, but it is a bit awkward:
How do you know that the i2c_adapter you are notified about is ready
to be interacted with? While investigating this, I noticed that the
i2c_driver has a .detect() mechanism, which is exactly what we need: A
callback when a newly added i2c_adapter is initialized and ready to be
used.
Since all chromeos_laptop does is to instantiate i2c devices, I
figured it would be nice to simply convert chromeos_laptop into a
i2c_driver. The result is the patch in the next mail (based on
v3.11-rc1).
I have gone through the SubmitChecklist and done everything that
applied. I have however only tested this patch on the Chromebook
Pixel, as that is what I have. I will need help with verifying the
patch on other Chromebooks.
But first, what do you think about my patch?
/ Martin
Martin Nordholts (1):
Platform: x86: chromeos_laptop - convert to i2c_driver to handle i915
race
drivers/platform/x86/chromeos_laptop.c | 426 +++++++++++++++-----------------
1 file changed, 194 insertions(+), 232 deletions(-)
--
1.7.10.4
From: Martin Nordholts <[email protected]>
On the Chromebook Pixel, if chromeos_laptop is loaded before the i915
module, the necessary i2c_adapters will not be avaible when
chromeos_laptop probes for them, and you will get this dmesg output:
[...] find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
[...] find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
[...] find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
Instead of manually adding code to listen for the additions of the
i2c_adapters we want, convert chromeos_laptop into an i2c_driver with
a .detect-function. Our detect-function will be called for all
i2c_adapters added before our driver is loaded, as well as for any
adapters added after our driver is loaded. This way, we don't need any
custom i2c probing code at all.
Signed-off-by: Martin Nordholts <[email protected]>
---
drivers/platform/x86/chromeos_laptop.c | 426 +++++++++++++++-----------------
1 file changed, 194 insertions(+), 232 deletions(-)
diff --git a/drivers/platform/x86/chromeos_laptop.c b/drivers/platform/x86/chromeos_laptop.c
index 3e5b4497..b9a5e81 100644
--- a/drivers/platform/x86/chromeos_laptop.c
+++ b/drivers/platform/x86/chromeos_laptop.c
@@ -2,8 +2,10 @@
* chromeos_laptop.c - Driver to instantiate Chromebook i2c/smbus devices.
*
* Author : Benson Leung <[email protected]>
+ * Author : Martin Nordholts <[email protected]>
*
* Copyright (C) 2012 Google, Inc.
+ * Copyright (C) 2012 Martin Nordholts
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,6 +30,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
+/* Keep chromeos_laptop_driver.address_list up to date with this list */
#define ATMEL_TP_I2C_ADDR 0x4b
#define ATMEL_TP_I2C_BL_ADDR 0x25
#define ATMEL_TS_I2C_ADDR 0x4a
@@ -36,37 +39,46 @@
#define ISL_ALS_I2C_ADDR 0x44
#define TAOS_ALS_I2C_ADDR 0x29
-static struct i2c_client *als;
-static struct i2c_client *tp;
-static struct i2c_client *ts;
+/* Information about an i2c_adapter that we handle in this driver */
+struct handled_adapter {
-const char *i2c_adapter_names[] = {
- "SMBus I801 adapter",
- "i915 gmbus vga",
- "i915 gmbus panel",
+ /* i2c_adapter name */
+ const char *adapter_name;
+
+ /* Terminate with .board_info = NULL */
+ struct client_entry *client_entries;
};
-/* Keep this enum consistent with i2c_adapter_names */
-enum i2c_adapter_type {
- I2C_ADAPTER_SMBUS = 0,
- I2C_ADAPTER_VGADDC,
- I2C_ADAPTER_PANEL,
+/* Information about an i2c_client we support for a given handled_adapter */
+struct client_entry {
+
+ /* DMI name used to obtain e.g. IRQ information */
+ const char *dmi_name;
+
+ /* i2c_board_info for this client */
+ const struct i2c_board_info *board_info;
+
+ /*
+ * List of addresses this i2c device can appear of. If not
+ * set, board_info->addr must be set
+ */
+ const unsigned short *address_list;
};
-static struct i2c_board_info __initdata cyapa_device = {
+static struct i2c_board_info cyapa_device = {
I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
.flags = I2C_CLIENT_WAKE,
};
-static struct i2c_board_info __initdata isl_als_device = {
+static struct i2c_board_info isl_als_device = {
I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
};
-static struct i2c_board_info __initdata tsl2583_als_device = {
+static struct i2c_board_info tsl2583_als_device = {
I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR),
};
-static struct i2c_board_info __initdata tsl2563_als_device = {
+static struct i2c_board_info tsl2563_als_device = {
I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR),
};
@@ -89,7 +101,7 @@ static struct mxt_platform_data atmel_224s_tp_platform_data = {
.config_length = 0,
};
-static struct i2c_board_info __initdata atmel_224s_tp_device = {
+static struct i2c_board_info atmel_224s_tp_device = {
I2C_BOARD_INFO("atmel_mxt_tp", ATMEL_TP_I2C_ADDR),
.platform_data = &atmel_224s_tp_platform_data,
.flags = I2C_CLIENT_WAKE,
@@ -110,25 +122,17 @@ static struct mxt_platform_data atmel_1664s_platform_data = {
.config_length = 0,
};
-static struct i2c_board_info __initdata atmel_1664s_device = {
+static struct i2c_board_info atmel_1664s_device = {
I2C_BOARD_INFO("atmel_mxt_ts", ATMEL_TS_I2C_ADDR),
.platform_data = &atmel_1664s_platform_data,
.flags = I2C_CLIENT_WAKE,
};
-static struct i2c_client __init *__add_probed_i2c_device(
- const char *name,
- int bus,
- struct i2c_board_info *info,
- const unsigned short *addrs)
+static int get_irq_for_dmi_name(const char *name)
{
const struct dmi_device *dmi_dev;
const struct dmi_dev_onboard *dev_data;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
- if (bus < 0)
- return NULL;
/*
* If a name is specified, look for irq platform information stashed
* in DMI_DEV_TYPE_DEV_ONBOARD by the Chrome OS custom system firmware.
@@ -139,270 +143,228 @@ static struct i2c_client __init *__add_probed_i2c_device(
pr_err("%s failed to dmi find device %s.\n",
__func__,
name);
- return NULL;
+ return 0;
+
}
dev_data = (struct dmi_dev_onboard *)dmi_dev->device_data;
if (!dev_data) {
pr_err("%s failed to get data from dmi for %s.\n",
__func__, name);
- return NULL;
+ return 0;
}
- info->irq = dev_data->instance;
- }
-
- adapter = i2c_get_adapter(bus);
- if (!adapter) {
- pr_err("%s failed to get i2c adapter %d.\n", __func__, bus);
- return NULL;
+ return dev_data->instance;
}
- /* add the i2c device */
- client = i2c_new_probed_device(adapter, info, addrs, NULL);
- if (!client)
- pr_err("%s failed to register device %d-%02x\n",
- __func__, bus, info->addr);
- else
- pr_debug("%s added i2c device %d-%02x\n",
- __func__, bus, info->addr);
-
- i2c_put_adapter(adapter);
- return client;
-}
-
-static int __init __find_i2c_adap(struct device *dev, void *data)
-{
- const char *name = data;
- static const char *prefix = "i2c-";
- struct i2c_adapter *adapter;
- if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0)
- return 0;
- adapter = to_i2c_adapter(dev);
- return (strncmp(adapter->name, name, strlen(name)) == 0);
-}
-
-static int __init find_i2c_adapter_num(enum i2c_adapter_type type)
-{
- struct device *dev = NULL;
- struct i2c_adapter *adapter;
- const char *name = i2c_adapter_names[type];
- /* find the adapter by name */
- dev = bus_find_device(&i2c_bus_type, NULL, (void *)name,
- __find_i2c_adap);
- if (!dev) {
- pr_err("%s: i2c adapter %s not found on system.\n", __func__,
- name);
- return -ENODEV;
- }
- adapter = to_i2c_adapter(dev);
- return adapter->nr;
-}
-
-/*
- * Takes a list of addresses in addrs as such :
- * { addr1, ... , addrn, I2C_CLIENT_END };
- * add_probed_i2c_device will use i2c_new_probed_device
- * and probe for devices at all of the addresses listed.
- * Returns NULL if no devices found.
- * See Documentation/i2c/instantiating-devices for more information.
- */
-static __init struct i2c_client *add_probed_i2c_device(
- const char *name,
- enum i2c_adapter_type type,
- struct i2c_board_info *info,
- const unsigned short *addrs)
-{
- return __add_probed_i2c_device(name,
- find_i2c_adapter_num(type),
- info,
- addrs);
-}
-
-/*
- * Probes for a device at a single address, the one provided by
- * info->addr.
- * Returns NULL if no device found.
- */
-static __init struct i2c_client *add_i2c_device(const char *name,
- enum i2c_adapter_type type,
- struct i2c_board_info *info)
-{
- const unsigned short addr_list[] = { info->addr, I2C_CLIENT_END };
- return __add_probed_i2c_device(name,
- find_i2c_adapter_num(type),
- info,
- addr_list);
-}
-
-
-static struct i2c_client __init *add_smbus_device(const char *name,
- struct i2c_board_info *info)
-{
- return add_i2c_device(name, I2C_ADAPTER_SMBUS, info);
-}
-
-static int __init setup_cyapa_smbus_tp(const struct dmi_system_id *id)
-{
- /* add cyapa touchpad on smbus */
- tp = add_smbus_device("trackpad", &cyapa_device);
- return 0;
-}
-
-static int __init setup_atmel_224s_tp(const struct dmi_system_id *id)
-{
- const unsigned short addr_list[] = { ATMEL_TP_I2C_BL_ADDR,
- ATMEL_TP_I2C_ADDR,
- I2C_CLIENT_END };
-
- /* add atmel mxt touchpad on VGA DDC GMBus */
- tp = add_probed_i2c_device("trackpad", I2C_ADAPTER_VGADDC,
- &atmel_224s_tp_device, addr_list);
- return 0;
-}
-
-static int __init setup_atmel_1664s_ts(const struct dmi_system_id *id)
-{
- const unsigned short addr_list[] = { ATMEL_TS_I2C_BL_ADDR,
- ATMEL_TS_I2C_ADDR,
- I2C_CLIENT_END };
-
- /* add atmel mxt touch device on PANEL GMBus */
- ts = add_probed_i2c_device("touchscreen", I2C_ADAPTER_PANEL,
- &atmel_1664s_device, addr_list);
- return 0;
-}
-
-
-static int __init setup_isl29018_als(const struct dmi_system_id *id)
-{
- /* add isl29018 light sensor */
- als = add_smbus_device("lightsensor", &isl_als_device);
- return 0;
-}
-
-static int __init setup_isl29023_als(const struct dmi_system_id *id)
-{
- /* add isl29023 light sensor on Panel GMBus */
- als = add_i2c_device("lightsensor", I2C_ADAPTER_PANEL,
- &isl_als_device);
return 0;
}
-static int __init setup_tsl2583_als(const struct dmi_system_id *id)
-{
- /* add tsl2583 light sensor on smbus */
- als = add_smbus_device(NULL, &tsl2583_als_device);
- return 0;
-}
-
-static int __init setup_tsl2563_als(const struct dmi_system_id *id)
-{
- /* add tsl2563 light sensor on smbus */
- als = add_smbus_device(NULL, &tsl2563_als_device);
- return 0;
-}
-
-static struct dmi_system_id __initdata chromeos_laptop_dmi_table[] = {
+#ifdef MODULE
+static struct dmi_system_id chromeos_laptop_dmi_table[] = {
{
- .ident = "Samsung Series 5 550 - Touchpad",
+ .ident = "Samsung Series 5 550",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
},
- .callback = setup_cyapa_smbus_tp,
- },
- {
- .ident = "Chromebook Pixel - Touchscreen",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
- },
- .callback = setup_atmel_1664s_ts,
},
{
- .ident = "Chromebook Pixel - Touchpad",
+ .ident = "Chromebook Pixel",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
},
- .callback = setup_atmel_224s_tp,
},
{
- .ident = "Samsung Series 5 550 - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
- },
- .callback = setup_isl29018_als,
- },
- {
- .ident = "Chromebook Pixel - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
- },
- .callback = setup_isl29023_als,
- },
- {
- .ident = "Acer C7 Chromebook - Touchpad",
+ .ident = "Acer C7 Chromebook",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Parrot"),
},
- .callback = setup_cyapa_smbus_tp,
},
{
- .ident = "HP Pavilion 14 Chromebook - Touchpad",
+ .ident = "HP Pavilion 14 Chromebook",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Butterfly"),
},
- .callback = setup_cyapa_smbus_tp,
},
{
- .ident = "Samsung Series 5 - Light Sensor",
+ .ident = "Samsung Series 5",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Alex"),
},
- .callback = setup_tsl2583_als,
},
{
- .ident = "Cr-48 - Light Sensor",
+ .ident = "Cr-48",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
},
- .callback = setup_tsl2563_als,
},
{
- .ident = "Acer AC700 - Light Sensor",
+ .ident = "Acer AC700",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
},
- .callback = setup_tsl2563_als,
},
- { }
+ { 0 }
};
+#endif
MODULE_DEVICE_TABLE(dmi, chromeos_laptop_dmi_table);
-static int __init chromeos_laptop_init(void)
+static struct client_entry smbus_i801_adapter_client_entries[] = {
+ {
+ .dmi_name = "trackpad",
+ .board_info = &cyapa_device,
+ },
+ {
+ .dmi_name = "lightsensor",
+ .board_info = &isl_als_device,
+ },
+ {
+ .dmi_name = NULL,
+ .board_info = &tsl2583_als_device,
+ },
+ {
+ .dmi_name = NULL,
+ .board_info = &tsl2563_als_device,
+ },
+ { 0 },
+};
+
+static struct client_entry i915_gmbus_vga_client_entries[] = {
+ {
+ .dmi_name = "trackpad",
+ .board_info = &atmel_224s_tp_device,
+ .address_list = I2C_ADDRS(
+ ATMEL_TP_I2C_BL_ADDR,
+ ATMEL_TP_I2C_ADDR),
+ },
+ { 0 },
+};
+
+static struct client_entry i915_gmbus_panel_client_entries[] = {
+ {
+ .dmi_name = "touchscreen",
+ .board_info = &atmel_1664s_device,
+ .address_list = I2C_ADDRS(
+ ATMEL_TS_I2C_BL_ADDR,
+ ATMEL_TS_I2C_ADDR),
+ },
+ {
+ .dmi_name = "lightsensor",
+ .board_info = &isl_als_device,
+ },
+ { 0 },
+};
+
+static struct handled_adapter handled_adapters[] = {
+ {
+ .adapter_name = "SMBus I801 adapter", /* I2C_CLASS_HWMON */
+ .client_entries = smbus_i801_adapter_client_entries,
+ },
+ {
+ .adapter_name = "i915 gmbus vga", /* I2C_CLASS_DDC */
+ .client_entries = i915_gmbus_vga_client_entries,
+ },
+ {
+ .adapter_name = "i915 gmbus panel", /* I2C_CLASS_DDC */
+ .client_entries = i915_gmbus_panel_client_entries,
+ },
+ { 0 },
+};
+
+static struct handled_adapter *to_handled_adapter(struct i2c_adapter *adap)
{
- if (!dmi_check_system(chromeos_laptop_dmi_table)) {
- pr_debug("%s unsupported system.\n", __func__);
- return -ENODEV;
+ struct handled_adapter *ha = handled_adapters;
+
+ while (ha->adapter_name) {
+ if (strcmp(adap->name, ha->adapter_name) == 0)
+ return ha;
+ ha++;
}
+
+ return NULL;
+}
+
+static int contains_addr(const unsigned short *address_list,
+ unsigned short addr) {
+ int i;
+
+ for (i = 0; address_list[i] != I2C_CLIENT_END; i++) {
+ if (address_list[i] == addr)
+ return 1;
+ }
+
return 0;
}
-static void __exit chromeos_laptop_exit(void)
+static int client_supports_address(struct client_entry *client_entry,
+ unsigned short addr) {
+ if (!client_entry->address_list)
+ return client_entry->board_info->addr == addr;
+ else
+ return contains_addr(client_entry->address_list, addr);
+}
+
+static struct client_entry *to_client_entry(struct handled_adapter *ha,
+ unsigned short addr) {
+ struct client_entry *ce = ha->client_entries;
+
+ while (ce->board_info) {
+ if (client_supports_address(ce, addr))
+ return ce;
+ ce++;
+ }
+
+ return NULL;
+}
+
+static void copy_client_entry_to_board_info(struct client_entry *client_entry,
+ struct i2c_board_info *info) {
+ const struct i2c_board_info *source_info = client_entry->board_info;
+
+ strncpy(info->type, source_info->type, strlen(source_info->type));
+ info->flags = source_info->flags;
+ info->addr = source_info->addr;
+ info->platform_data = source_info->platform_data;
+ info->archdata = source_info->archdata;
+ info->of_node = source_info->of_node;
+ info->acpi_node = source_info->acpi_node;
+ info->irq = get_irq_for_dmi_name(client_entry->dmi_name);
+}
+
+static int chromeos_laptop_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
{
- if (als)
- i2c_unregister_device(als);
- if (tp)
- i2c_unregister_device(tp);
- if (ts)
- i2c_unregister_device(ts);
+ struct i2c_adapter *adapter = client->adapter;
+ struct handled_adapter *ha;
+ struct client_entry *ce;
+
+ ha = to_handled_adapter(adapter);
+ if (!ha)
+ return -ENODEV;
+
+ ce = to_client_entry(ha, info->addr);
+ if (!ce)
+ return -ENODEV;
+
+ copy_client_entry_to_board_info(ce, info);
+ return 0;
}
-module_init(chromeos_laptop_init);
-module_exit(chromeos_laptop_exit);
+
+static struct i2c_driver chromeos_laptop_driver = {
+ .driver = {
+ .name = "chromeos_laptop",
+ },
+ .address_list = I2C_ADDRS(ATMEL_TP_I2C_ADDR, ATMEL_TP_I2C_BL_ADDR,
+ ATMEL_TS_I2C_ADDR, ATMEL_TS_I2C_BL_ADDR,
+ CYAPA_TP_I2C_ADDR, ISL_ALS_I2C_ADDR,
+ TAOS_ALS_I2C_ADDR),
+ .detect = chromeos_laptop_detect,
+ .class = I2C_CLASS_DDC | I2C_CLASS_HWMON,
+};
+
+module_i2c_driver(chromeos_laptop_driver);
MODULE_DESCRIPTION("Chrome OS Laptop driver");
-MODULE_AUTHOR("Benson Leung <[email protected]>");
+MODULE_AUTHOR("Benson Leung <[email protected]>, Martin Nordholts <[email protected]>");
MODULE_LICENSE("GPL");
--
1.7.10.4
Hi Martin,
Thank you for looking into this problem. Obviously, this is a problem
Olof and our team has been working on as well.
On Thu, Jul 18, 2013 at 8:58 AM, <[email protected]> wrote:
> From: Martin Nordholts <[email protected]>
>
> Hello,
>
> I have looked into solving the "touchpad/touchscreen not working on
> boot"-problem on Chromebook Pixel, see for example Brock Tice's last
> comment on https://plus.google.com/+LinusTorvalds/posts/1iFsBWBqoYY
>
> I have seen Olof's attempt at a fix:
>
> [PATCH] Platform: x86: chromeos_laptop: defer probing if no i2c busses found
> https://lkml.org/lkml/2013/4/18/556
>
> At first, I tried Olofs suggestion at the end of the thread, namely to
> do bus_register_notifier() on i2c_bus_type, but it is a bit awkward:
> How do you know that the i2c_adapter you are notified about is ready
> to be interacted with? While investigating this, I noticed that the
> i2c_driver has a .detect() mechanism, which is exactly what we need: A
> callback when a newly added i2c_adapter is initialized and ready to be
> used.
I would be hesitant to use .detect(), as its use will have unintended
side effects. I'll give you a real world example of what can happen
with your driver.
Here I've run the i2cdetect command on an actual Chromebook platform.
The name of the bus is SMBus I801 adapter at 0400, so it will be
triggered by your detect.
localhost ~ # i2cdetect -y 8
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- 35 -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- 4a 4b -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Your driver will try to instantiate device 0x44, the isl29018 ambient
light sensor, device 0x4a, an Atmel touchscreen, and device 0x4b, an
Atmel touchpad.
The problem is that none of those devices actually exist on this
particular system's SMBus.
These are other i2c clients that just happen to share the same
addresses as devices on other buses on other supported systems. 0x44,
for example, is the Intel PCH SMBus's host Receive Slave Address
Register. It just happens to have the same address as the isl29018.
Your driver would result in three failed probes in 2 different drivers
on my board.
Furthermore, I would recommend reading the documentation on
instantiating i2c devices :
https://www.kernel.org/doc/Documentation/i2c/instantiating-devices
The documentation outlines the four methods that are supported for
instantiating i2c devices. "Detect" is method #3, but it comes with a
stern warning : Once again, method 3 should be avoided wherever
possible. Explicit device instantiation (methods 1 and 2) is much
preferred for it is safer and faster.
>
> Since all chromeos_laptop does is to instantiate i2c devices, I
> figured it would be nice to simply convert chromeos_laptop into a
> i2c_driver. The result is the patch in the next mail (based on
> v3.11-rc1).
That is actually not true. The intention is for chromeos_laptop to
eventually instantiate devices other than i2c devices, actually. The
chromeos-kernel version of this driver actually supports the
Chromebook Pixel's keyboard backlight, which is not an i2c device but
a platform device, so making this driver a platform driver is more
appropriate.
https://gerrit.chromium.org/gitweb/?p=chromiumos/third_party/kernel-next.git;a=blob;f=drivers/platform/x86/chromeos_laptop.c;hb=refs/heads/chromeos-3.8
>
> I have gone through the SubmitChecklist and done everything that
> applied. I have however only tested this patch on the Chromebook
> Pixel, as that is what I have. I will need help with verifying the
> patch on other Chromebooks.
As I mentioned before, the patch causes problems on other Chromebook
systems I have tested with devices with colliding addresses on SMBus.
>
> But first, what do you think about my patch?
>
> / Martin
>
> Martin Nordholts (1):
> Platform: x86: chromeos_laptop - convert to i2c_driver to handle i915
> race
>
> drivers/platform/x86/chromeos_laptop.c | 426 +++++++++++++++-----------------
> 1 file changed, 194 insertions(+), 232 deletions(-)
>
> --
> 1.7.10.4
>
--
Benson Leung
Software Engineer, Chrom* OS
[email protected]
2013/8/5 Benson Leung <[email protected]>:
> Hi Martin,
>
> Thank you for looking into this problem. Obviously, this is a problem
> Olof and our team has been working on as well.
Hi Benson,
Thank you for spending time reviewing and testing my patch. I
understand your team is busy and am honored you took the time to look
at my code.
> Your driver would result in three failed probes in 2 different drivers
> on my board.
Yes that is one down-side; sometimes the detect() function will be
triggered even though the device is not supported (the return -ENODEV
code paths in my driver). I thought that maybe a simpler driver could
make up for unnecessary detect() calls. However ...
> "Detect" is method #3, but it comes with a
> stern warning : Once again, method 3 should be avoided wherever
> possible. Explicit device instantiation (methods 1 and 2) is much
> preferred for it is safer and faster.
... I must admit I did not see this. I realize that this makes my
patch a dead end. I wish I would have seen that earlier, that would
have saved time for everyone. My apologies.
Regarding the interaction with non-i2c devices in chromeos_laptop, I
was thinking that could perhaps have been solved by putting the i2c
stuff in a separate driver, say chromeos_laptop_i2c, but that point is
irrelevant now that you pointed out that the use of the
detect()-method is discouraged by the documentation.
Thank you again for reviewing the patch and for providing feedback.
BR,
Martin
Hi Martin,
On Sun, Aug 4, 2013 at 10:32 PM, Martin Nordholts <[email protected]> wrote:
> ... I must admit I did not see this. I realize that this makes my
> patch a dead end. I wish I would have seen that earlier, that would
> have saved time for everyone. My apologies.
>
> Regarding the interaction with non-i2c devices in chromeos_laptop, I
> was thinking that could perhaps have been solved by putting the i2c
> stuff in a separate driver, say chromeos_laptop_i2c, but that point is
> irrelevant now that you pointed out that the use of the
> detect()-method is discouraged by the documentation.
>
> Thank you again for reviewing the patch and for providing feedback.
No problem at all. Thank you for your interest in our project, actually!
If you get a chance, could you let me know if my deferred probe
changes work well in your configuration?
--
Benson Leung
Software Engineer, Chrom* OS
[email protected]
2013/8/7 Benson Leung <[email protected]>
>
> If you get a chance, could you let me know if my deferred probe
> changes work well in your configuration?
I can confirm that your changes works, i.e. the touchpad and
touchscreen works directly after boot on my 32GB non-LTE Chromebook
Pixel. I applied the patches on a clean 3.11-rc4 tree using a
localmodconfig on Debian 7.1. I get this in dmesg --level err
(--notime) though
find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
Personally I don't like getting error messages when the driver works
as designed. I would prefer to have priority lowered to 'notice' on
those.
Regards,
Martin
Hi Martin,
On Sun, Aug 11, 2013 at 12:54 PM, Martin Nordholts <[email protected]> wrote:
> I get this in dmesg --level err
> (--notime) though
>
> find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus vga not found on system.
> find_i2c_adapter_num: i2c adapter i915 gmbus panel not found on system.
>
> Personally I don't like getting error messages when the driver works
> as designed. I would prefer to have priority lowered to 'notice' on
> those.
Sounds good to me. I'll make this change.
Thanks again!
Benson
--
Benson Leung
Software Engineer, Chrom* OS
[email protected]