The patch introduces skeleton IOMMU device driver implementation as defined
by RISC-V IOMMU Architecture Specification, Version 1.0 [1], with minimal support
for pass-through mapping, basic initialization and bindings for platform and PCIe
hardware implementations.
Series of patches following specification evolution has been reorganized to provide
functional separation of implemented blocks, compliant with ratified specification.
This and following patch series includes code contributed by: Nick Kossifidis
<[email protected]> (iommu-platform device, number of specification clarification
and bugfixes and readability improvements), Sebastien Boeuf <[email protected]> (page
table creation, ATS/PGR flow).
Complete history can be found at the maintainer's repository branch [2].
Device driver enables RISC-V 32/64 support for memory translation for DMA capable
PCI and platform devices, multilevel device directory table, process directory,
shared virtual address support, wired and message signaled interrupt for translation
I/O fault, page request interface and command processing.
Matching RISCV-V IOMMU device emulation implementation is available for QEMU project,
along with educational device extensions for PASID ATS/PRI support [3].
References:
- [1] https://github.com/riscv-non-isa/riscv-iommu
- [2] https://github.com/tjeznach/linux/tree/tjeznach/riscv-iommu
- [3] https://github.com/tjeznach/qemu/tree/tjeznach/riscv-iommu
Co-developed-by: Nick Kossifidis <[email protected]>
Signed-off-by: Nick Kossifidis <[email protected]>
Co-developed-by: Sebastien Boeuf <[email protected]>
Signed-off-by: Sebastien Boeuf <[email protected]>
Signed-off-by: Tomasz Jeznach <[email protected]>
---
drivers/iommu/Kconfig | 1 +
drivers/iommu/Makefile | 2 +-
drivers/iommu/riscv/Kconfig | 22 +
drivers/iommu/riscv/Makefile | 1 +
drivers/iommu/riscv/iommu-bits.h | 704 +++++++++++++++++++++++++++
drivers/iommu/riscv/iommu-pci.c | 134 +++++
drivers/iommu/riscv/iommu-platform.c | 94 ++++
drivers/iommu/riscv/iommu.c | 660 +++++++++++++++++++++++++
drivers/iommu/riscv/iommu.h | 115 +++++
9 files changed, 1732 insertions(+), 1 deletion(-)
create mode 100644 drivers/iommu/riscv/Kconfig
create mode 100644 drivers/iommu/riscv/Makefile
create mode 100644 drivers/iommu/riscv/iommu-bits.h
create mode 100644 drivers/iommu/riscv/iommu-pci.c
create mode 100644 drivers/iommu/riscv/iommu-platform.c
create mode 100644 drivers/iommu/riscv/iommu.c
create mode 100644 drivers/iommu/riscv/iommu.h
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 2b12b583ef4b..36fcc6fd5b4e 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -187,6 +187,7 @@ config MSM_IOMMU
source "drivers/iommu/amd/Kconfig"
source "drivers/iommu/intel/Kconfig"
source "drivers/iommu/iommufd/Kconfig"
+source "drivers/iommu/riscv/Kconfig"
config IRQ_REMAP
bool "Support for Interrupt Remapping"
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 769e43d780ce..8f57110a9fb1 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-y += amd/ intel/ arm/ iommufd/
+obj-y += amd/ intel/ arm/ iommufd/ riscv/
obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_IOMMU_API) += iommu-traces.o
obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
diff --git a/drivers/iommu/riscv/Kconfig b/drivers/iommu/riscv/Kconfig
new file mode 100644
index 000000000000..01d4043849d4
--- /dev/null
+++ b/drivers/iommu/riscv/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# RISC-V IOMMU support
+
+config RISCV_IOMMU
+ bool "RISC-V IOMMU driver"
+ depends on RISCV
+ select IOMMU_API
+ select IOMMU_DMA
+ select IOMMU_SVA
+ select IOMMU_IOVA
+ select IOMMU_IO_PGTABLE
+ select IOASID
+ select PCI_MSI
+ select PCI_ATS
+ select PCI_PRI
+ select PCI_PASID
+ select MMU_NOTIFIER
+ help
+ Support for devices following RISC-V IOMMU specification.
+
+ If unsure, say N here.
+
diff --git a/drivers/iommu/riscv/Makefile b/drivers/iommu/riscv/Makefile
new file mode 100644
index 000000000000..38730c11e4a8
--- /dev/null
+++ b/drivers/iommu/riscv/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_RISCV_IOMMU) += iommu.o iommu-pci.o iommu-platform.o
\ No newline at end of file
diff --git a/drivers/iommu/riscv/iommu-bits.h b/drivers/iommu/riscv/iommu-bits.h
new file mode 100644
index 000000000000..b2946793a73d
--- /dev/null
+++ b/drivers/iommu/riscv/iommu-bits.h
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2022-2023 Rivos Inc.
+ * Copyright © 2023 FORTH-ICS/CARV
+ * Copyright © 2023 RISC-V IOMMU Task Group
+ *
+ * RISC-V Ziommu - Register Layout and Data Structures.
+ *
+ * Based on the 'RISC-V IOMMU Architecture Specification', Version 1.0
+ * Published at https://github.com/riscv-non-isa/riscv-iommu
+ *
+ */
+
+#ifndef _RISCV_IOMMU_BITS_H_
+#define _RISCV_IOMMU_BITS_H_
+
+#include <linux/types.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+/*
+ * Chapter 5: Memory Mapped register interface
+ */
+
+/* Common field positions */
+#define RISCV_IOMMU_PPN_FIELD GENMASK_ULL(53, 10)
+#define RISCV_IOMMU_QUEUE_LOGSZ_FIELD GENMASK_ULL(4, 0)
+#define RISCV_IOMMU_QUEUE_INDEX_FIELD GENMASK_ULL(31, 0)
+#define RISCV_IOMMU_QUEUE_ENABLE BIT(0)
+#define RISCV_IOMMU_QUEUE_INTR_ENABLE BIT(1)
+#define RISCV_IOMMU_QUEUE_MEM_FAULT BIT(8)
+#define RISCV_IOMMU_QUEUE_OVERFLOW BIT(9)
+#define RISCV_IOMMU_QUEUE_ACTIVE BIT(16)
+#define RISCV_IOMMU_QUEUE_BUSY BIT(17)
+
+#define RISCV_IOMMU_ATP_PPN_FIELD GENMASK_ULL(43, 0)
+#define RISCV_IOMMU_ATP_MODE_FIELD GENMASK_ULL(63, 60)
+
+/* 5.3 IOMMU Capabilities (64bits) */
+#define RISCV_IOMMU_REG_CAP 0x0000
+#define RISCV_IOMMU_CAP_VERSION GENMASK_ULL(7, 0)
+#define RISCV_IOMMU_CAP_S_SV32 BIT_ULL(8)
+#define RISCV_IOMMU_CAP_S_SV39 BIT_ULL(9)
+#define RISCV_IOMMU_CAP_S_SV48 BIT_ULL(10)
+#define RISCV_IOMMU_CAP_S_SV57 BIT_ULL(11)
+#define RISCV_IOMMU_CAP_SVPBMT BIT_ULL(15)
+#define RISCV_IOMMU_CAP_G_SV32 BIT_ULL(16)
+#define RISCV_IOMMU_CAP_G_SV39 BIT_ULL(17)
+#define RISCV_IOMMU_CAP_G_SV48 BIT_ULL(18)
+#define RISCV_IOMMU_CAP_G_SV57 BIT_ULL(19)
+#define RISCV_IOMMU_CAP_MSI_FLAT BIT_ULL(22)
+#define RISCV_IOMMU_CAP_MSI_MRIF BIT_ULL(23)
+#define RISCV_IOMMU_CAP_AMO BIT_ULL(24)
+#define RISCV_IOMMU_CAP_ATS BIT_ULL(25)
+#define RISCV_IOMMU_CAP_T2GPA BIT_ULL(26)
+#define RISCV_IOMMU_CAP_END BIT_ULL(27)
+#define RISCV_IOMMU_CAP_IGS GENMASK_ULL(29, 28)
+#define RISCV_IOMMU_CAP_HPM BIT_ULL(30)
+#define RISCV_IOMMU_CAP_DBG BIT_ULL(31)
+#define RISCV_IOMMU_CAP_PAS GENMASK_ULL(37, 32)
+#define RISCV_IOMMU_CAP_PD8 BIT_ULL(38)
+#define RISCV_IOMMU_CAP_PD17 BIT_ULL(39)
+#define RISCV_IOMMU_CAP_PD20 BIT_ULL(40)
+
+#define RISCV_IOMMU_CAP_VERSION_VER_MASK 0xF0
+#define RISCV_IOMMU_CAP_VERSION_REV_MASK 0x0F
+
+/**
+ * enum riscv_iommu_igs_settings - Interrupt Generation Support Settings
+ * @RISCV_IOMMU_CAP_IGS_MSI: I/O MMU supports only MSI generation
+ * @RISCV_IOMMU_CAP_IGS_WSI: I/O MMU supports only Wired-Signaled interrupt
+ * @RISCV_IOMMU_CAP_IGS_BOTH: I/O MMU supports both MSI and WSI generation
+ * @RISCV_IOMMU_CAP_IGS_RSRV: Reserved for standard use
+ */
+enum riscv_iommu_igs_settings {
+ RISCV_IOMMU_CAP_IGS_MSI = 0,
+ RISCV_IOMMU_CAP_IGS_WSI = 1,
+ RISCV_IOMMU_CAP_IGS_BOTH = 2,
+ RISCV_IOMMU_CAP_IGS_RSRV = 3
+};
+
+/* 5.4 Features control register (32bits) */
+#define RISCV_IOMMU_REG_FCTL 0x0008
+#define RISCV_IOMMU_FCTL_BE BIT(0)
+#define RISCV_IOMMU_FCTL_WSI BIT(1)
+#define RISCV_IOMMU_FCTL_GXL BIT(2)
+
+/* 5.5 Device-directory-table pointer (64bits) */
+#define RISCV_IOMMU_REG_DDTP 0x0010
+#define RISCV_IOMMU_DDTP_MODE GENMASK_ULL(3, 0)
+#define RISCV_IOMMU_DDTP_BUSY BIT_ULL(4)
+#define RISCV_IOMMU_DDTP_PPN RISCV_IOMMU_PPN_FIELD
+
+/**
+ * enum riscv_iommu_ddtp_modes - I/O MMU translation modes
+ * @RISCV_IOMMU_DDTP_MODE_OFF: No inbound transactions allowed
+ * @RISCV_IOMMU_DDTP_MODE_BARE: Pass-through mode
+ * @RISCV_IOMMU_DDTP_MODE_1LVL: One-level DDT
+ * @RISCV_IOMMU_DDTP_MODE_2LVL: Two-level DDT
+ * @RISCV_IOMMU_DDTP_MODE_3LVL: Three-level DDT
+ */
+enum riscv_iommu_ddtp_modes {
+ RISCV_IOMMU_DDTP_MODE_OFF = 0,
+ RISCV_IOMMU_DDTP_MODE_BARE = 1,
+ RISCV_IOMMU_DDTP_MODE_1LVL = 2,
+ RISCV_IOMMU_DDTP_MODE_2LVL = 3,
+ RISCV_IOMMU_DDTP_MODE_3LVL = 4,
+ RISCV_IOMMU_DDTP_MODE_MAX = 4
+};
+
+/* 5.6 Command Queue Base (64bits) */
+#define RISCV_IOMMU_REG_CQB 0x0018
+#define RISCV_IOMMU_CQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
+#define RISCV_IOMMU_CQB_PPN RISCV_IOMMU_PPN_FIELD
+
+/* 5.7 Command Queue head (32bits) */
+#define RISCV_IOMMU_REG_CQH 0x0020
+#define RISCV_IOMMU_CQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
+
+/* 5.8 Command Queue tail (32bits) */
+#define RISCV_IOMMU_REG_CQT 0x0024
+#define RISCV_IOMMU_CQT_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
+
+/* 5.9 Fault Queue Base (64bits) */
+#define RISCV_IOMMU_REG_FQB 0x0028
+#define RISCV_IOMMU_FQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
+#define RISCV_IOMMU_FQB_PPN RISCV_IOMMU_PPN_FIELD
+
+/* 5.10 Fault Queue Head (32bits) */
+#define RISCV_IOMMU_REG_FQH 0x0030
+#define RISCV_IOMMU_FQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
+
+/* 5.11 Fault Queue tail (32bits) */
+#define RISCV_IOMMU_REG_FQT 0x0034
+#define RISCV_IOMMU_FQT_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
+
+/* 5.12 Page Request Queue base (64bits) */
+#define RISCV_IOMMU_REG_PQB 0x0038
+#define RISCV_IOMMU_PQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
+#define RISCV_IOMMU_PQB_PPN RISCV_IOMMU_PPN_FIELD
+
+/* 5.13 Page Request Queue head (32bits) */
+#define RISCV_IOMMU_REG_PQH 0x0040
+#define RISCV_IOMMU_PQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
+
+/* 5.14 Page Request Queue tail (32bits) */
+#define RISCV_IOMMU_REG_PQT 0x0044
+#define RISCV_IOMMU_PQT_INDEX_MASK RISCV_IOMMU_QUEUE_INDEX_FIELD
+
+/* 5.15 Command Queue CSR (32bits) */
+#define RISCV_IOMMU_REG_CQCSR 0x0048
+#define RISCV_IOMMU_CQCSR_CQEN RISCV_IOMMU_QUEUE_ENABLE
+#define RISCV_IOMMU_CQCSR_CIE RISCV_IOMMU_QUEUE_INTR_ENABLE
+#define RISCV_IOMMU_CQCSR_CQMF RISCV_IOMMU_QUEUE_MEM_FAULT
+#define RISCV_IOMMU_CQCSR_CMD_TO BIT(9)
+#define RISCV_IOMMU_CQCSR_CMD_ILL BIT(10)
+#define RISCV_IOMMU_CQCSR_FENCE_W_IP BIT(11)
+#define RISCV_IOMMU_CQCSR_CQON RISCV_IOMMU_QUEUE_ACTIVE
+#define RISCV_IOMMU_CQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
+
+/* 5.16 Fault Queue CSR (32bits) */
+#define RISCV_IOMMU_REG_FQCSR 0x004C
+#define RISCV_IOMMU_FQCSR_FQEN RISCV_IOMMU_QUEUE_ENABLE
+#define RISCV_IOMMU_FQCSR_FIE RISCV_IOMMU_QUEUE_INTR_ENABLE
+#define RISCV_IOMMU_FQCSR_FQMF RISCV_IOMMU_QUEUE_MEM_FAULT
+#define RISCV_IOMMU_FQCSR_FQOF RISCV_IOMMU_QUEUE_OVERFLOW
+#define RISCV_IOMMU_FQCSR_FQON RISCV_IOMMU_QUEUE_ACTIVE
+#define RISCV_IOMMU_FQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
+
+/* 5.17 Page Request Queue CSR (32bits) */
+#define RISCV_IOMMU_REG_PQCSR 0x0050
+#define RISCV_IOMMU_PQCSR_PQEN RISCV_IOMMU_QUEUE_ENABLE
+#define RISCV_IOMMU_PQCSR_PIE RISCV_IOMMU_QUEUE_INTR_ENABLE
+#define RISCV_IOMMU_PQCSR_PQMF RISCV_IOMMU_QUEUE_MEM_FAULT
+#define RISCV_IOMMU_PQCSR_PQOF RISCV_IOMMU_QUEUE_OVERFLOW
+#define RISCV_IOMMU_PQCSR_PQON RISCV_IOMMU_QUEUE_ACTIVE
+#define RISCV_IOMMU_PQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
+
+/* 5.18 Interrupt Pending Status (32bits) */
+#define RISCV_IOMMU_REG_IPSR 0x0054
+
+#define RISCV_IOMMU_INTR_CQ 0
+#define RISCV_IOMMU_INTR_FQ 1
+#define RISCV_IOMMU_INTR_PM 2
+#define RISCV_IOMMU_INTR_PQ 3
+#define RISCV_IOMMU_INTR_COUNT 4
+
+#define RISCV_IOMMU_IPSR_CIP BIT(RISCV_IOMMU_INTR_CQ)
+#define RISCV_IOMMU_IPSR_FIP BIT(RISCV_IOMMU_INTR_FQ)
+#define RISCV_IOMMU_IPSR_PMIP BIT(RISCV_IOMMU_INTR_PM)
+#define RISCV_IOMMU_IPSR_PIP BIT(RISCV_IOMMU_INTR_PQ)
+
+/* 5.19 Performance monitoring counter overflow status (32bits) */
+#define RISCV_IOMMU_REG_IOCOUNTOVF 0x0058
+#define RISCV_IOMMU_IOCOUNTOVF_CY BIT(0)
+#define RISCV_IOMMU_IOCOUNTOVF_HPM GENMASK_ULL(31, 1)
+
+/* 5.20 Performance monitoring counter inhibits (32bits) */
+#define RISCV_IOMMU_REG_IOCOUNTINH 0x005C
+#define RISCV_IOMMU_IOCOUNTINH_CY BIT(0)
+#define RISCV_IOMMU_IOCOUNTINH_HPM GENMASK(31, 1)
+
+/* 5.21 Performance monitoring cycles counter (64bits) */
+#define RISCV_IOMMU_REG_IOHPMCYCLES 0x0060
+#define RISCV_IOMMU_IOHPMCYCLES_COUNTER GENMASK_ULL(62, 0)
+#define RISCV_IOMMU_IOHPMCYCLES_OVF BIT_ULL(63)
+
+/* 5.22 Performance monitoring event counters (31 * 64bits) */
+#define RISCV_IOMMU_REG_IOHPMCTR_BASE 0x0068
+#define RISCV_IOMMU_REG_IOHPMCTR(_n) (RISCV_IOMMU_REG_IOHPMCTR_BASE + (_n * 0x8))
+
+/* 5.23 Performance monitoring event selectors (31 * 64bits) */
+#define RISCV_IOMMU_REG_IOHPMEVT_BASE 0x0160
+#define RISCV_IOMMU_REG_IOHPMEVT(_n) (RISCV_IOMMU_REG_IOHPMEVT_BASE + (_n * 0x8))
+#define RISCV_IOMMU_IOHPMEVT_EVENT_ID GENMASK_ULL(14, 0)
+#define RISCV_IOMMU_IOHPMEVT_DMASK BIT_ULL(15)
+#define RISCV_IOMMU_IOHPMEVT_PID_PSCID GENMASK_ULL(35, 16)
+#define RISCV_IOMMU_IOHPMEVT_DID_GSCID GENMASK_ULL(59, 36)
+#define RISCV_IOMMU_IOHPMEVT_PV_PSCV BIT_ULL(60)
+#define RISCV_IOMMU_IOHPMEVT_DV_GSCV BIT_ULL(61)
+#define RISCV_IOMMU_IOHPMEVT_IDT BIT_ULL(62)
+#define RISCV_IOMMU_IOHPMEVT_OF BIT_ULL(63)
+
+/**
+ * enum riscv_iommu_hpmevent_id - Performance-monitoring event identifier
+ *
+ * @RISCV_IOMMU_HPMEVENT_INVALID: Invalid event, do not count
+ * @RISCV_IOMMU_HPMEVENT_URQ: Untranslated requests
+ * @RISCV_IOMMU_HPMEVENT_TRQ: Translated requests
+ * @RISCV_IOMMU_HPMEVENT_ATS_RQ: ATS translation requests
+ * @RISCV_IOMMU_HPMEVENT_TLB_MISS: TLB misses
+ * @RISCV_IOMMU_HPMEVENT_DD_WALK: Device directory walks
+ * @RISCV_IOMMU_HPMEVENT_PD_WALK: Process directory walks
+ * @RISCV_IOMMU_HPMEVENT_S_VS_WALKS: S/VS-Stage page table walks
+ * @RISCV_IOMMU_HPMEVENT_G_WALKS: G-Stage page table walks
+ * @RISCV_IOMMU_HPMEVENT_MAX: Value to denote maximum Event IDs
+ */
+enum riscv_iommu_hpmevent_id {
+ RISCV_IOMMU_HPMEVENT_INVALID = 0,
+ RISCV_IOMMU_HPMEVENT_URQ = 1,
+ RISCV_IOMMU_HPMEVENT_TRQ = 2,
+ RISCV_IOMMU_HPMEVENT_ATS_RQ = 3,
+ RISCV_IOMMU_HPMEVENT_TLB_MISS = 4,
+ RISCV_IOMMU_HPMEVENT_DD_WALK = 5,
+ RISCV_IOMMU_HPMEVENT_PD_WALK = 6,
+ RISCV_IOMMU_HPMEVENT_S_VS_WALKS = 7,
+ RISCV_IOMMU_HPMEVENT_G_WALKS = 8,
+ RISCV_IOMMU_HPMEVENT_MAX = 9
+};
+
+/* 5.24 Translation request IOVA (64bits) */
+#define RISCV_IOMMU_REG_TR_REQ_IOVA 0x0258
+#define RISCV_IOMMU_TR_REQ_IOVA_VPN GENMASK_ULL(63, 12)
+
+/* 5.25 Translation request control (64bits) */
+#define RISCV_IOMMU_REG_TR_REQ_CTL 0x0260
+#define RISCV_IOMMU_TR_REQ_CTL_GO_BUSY BIT_ULL(0)
+#define RISCV_IOMMU_TR_REQ_CTL_PRIV BIT_ULL(1)
+#define RISCV_IOMMU_TR_REQ_CTL_EXE BIT_ULL(2)
+#define RISCV_IOMMU_TR_REQ_CTL_NW BIT_ULL(3)
+#define RISCV_IOMMU_TR_REQ_CTL_PID GENMASK_ULL(31, 12)
+#define RISCV_IOMMU_TR_REQ_CTL_PV BIT_ULL(32)
+#define RISCV_IOMMU_TR_REQ_CTL_DID GENMASK_ULL(63, 40)
+
+/* 5.26 Translation request response (64bits) */
+#define RISCV_IOMMU_REG_TR_RESPONSE 0x0268
+#define RISCV_IOMMU_TR_RESPONSE_FAULT BIT_ULL(0)
+#define RISCV_IOMMU_TR_RESPONSE_PBMT GENMASK_ULL(8, 7)
+#define RISCV_IOMMU_TR_RESPONSE_SZ BIT_ULL(9)
+#define RISCV_IOMMU_TR_RESPONSE_PPN RISCV_IOMMU_PPN_FIELD
+
+/* 5.27 Interrupt cause to vector (64bits) */
+#define RISCV_IOMMU_REG_IVEC 0x02F8
+#define RISCV_IOMMU_IVEC_CIV GENMASK_ULL(3, 0)
+#define RISCV_IOMMU_IVEC_FIV GENMASK_ULL(7, 4)
+#define RISCV_IOMMU_IVEC_PMIV GENMASK_ULL(11, 8)
+#define RISCV_IOMMU_IVEC_PIV GENMASK_ULL(15,12)
+
+/* 5.28 MSI Configuration table (32 * 64bits) */
+#define RISCV_IOMMU_REG_MSI_CONFIG 0x0300
+#define RISCV_IOMMU_REG_MSI_ADDR(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10))
+#define RISCV_IOMMU_MSI_ADDR GENMASK_ULL(55, 2)
+#define RISCV_IOMMU_REG_MSI_DATA(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10) + 0x08)
+#define RISCV_IOMMU_MSI_DATA GENMASK_ULL(31, 0)
+#define RISCV_IOMMU_REG_MSI_VEC_CTL(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10) + 0x0C)
+#define RISCV_IOMMU_MSI_VEC_CTL_M BIT_ULL(0)
+
+#define RISCV_IOMMU_REG_SIZE 0x1000
+
+/*
+ * Chapter 2: Data structures
+ */
+
+/*
+ * Device Directory Table macros for non-leaf nodes
+ */
+#define RISCV_IOMMU_DDTE_VALID BIT_ULL(0)
+#define RISCV_IOMMU_DDTE_PPN RISCV_IOMMU_PPN_FIELD
+
+/**
+ * struct riscv_iommu_dc - Device Context
+ * @tc: Translation Control
+ * @iohgatp: I/O Hypervisor guest address translation and protection
+ * (Second stage context)
+ * @ta: Translation Attributes
+ * @fsc: First stage context
+ * @msiptpt: MSI page table pointer
+ * @msi_addr_mask: MSI address mask
+ * @msi_addr_pattern: MSI address pattern
+ *
+ * This structure is used for leaf nodes on the Device Directory Table,
+ * in case RISCV_IOMMU_CAP_MSI_FLAT is not set, the bottom 4 fields are
+ * not present and are skipped with pointer arithmetic to avoid
+ * casting, check out riscv_iommu_get_dc().
+ * See section 2.1 for more details
+ */
+struct riscv_iommu_dc {
+ u64 tc;
+ u64 iohgatp;
+ u64 ta;
+ u64 fsc;
+ u64 msiptp;
+ u64 msi_addr_mask;
+ u64 msi_addr_pattern;
+ u64 _reserved;
+};
+
+/* Translation control fields */
+#define RISCV_IOMMU_DC_TC_V BIT_ULL(0)
+#define RISCV_IOMMU_DC_TC_EN_ATS BIT_ULL(1)
+#define RISCV_IOMMU_DC_TC_EN_PRI BIT_ULL(2)
+#define RISCV_IOMMU_DC_TC_T2GPA BIT_ULL(3)
+#define RISCV_IOMMU_DC_TC_DTF BIT_ULL(4)
+#define RISCV_IOMMU_DC_TC_PDTV BIT_ULL(5)
+#define RISCV_IOMMU_DC_TC_PRPR BIT_ULL(6)
+#define RISCV_IOMMU_DC_TC_GADE BIT_ULL(7)
+#define RISCV_IOMMU_DC_TC_SADE BIT_ULL(8)
+#define RISCV_IOMMU_DC_TC_DPE BIT_ULL(9)
+#define RISCV_IOMMU_DC_TC_SBE BIT_ULL(10)
+#define RISCV_IOMMU_DC_TC_SXL BIT_ULL(11)
+
+/* Second-stage (aka G-stage) context fields */
+#define RISCV_IOMMU_DC_IOHGATP_PPN RISCV_IOMMU_ATP_PPN_FIELD
+#define RISCV_IOMMU_DC_IOHGATP_GSCID GENMASK_ULL(59, 44)
+#define RISCV_IOMMU_DC_IOHGATP_MODE RISCV_IOMMU_ATP_MODE_FIELD
+
+/**
+ * enum riscv_iommu_dc_iohgatp_modes - Guest address translation/protection modes
+ * @RISCV_IOMMU_DC_IOHGATP_MODE_BARE: No translation/protection
+ * @RISCV_IOMMU_DC_IOHGATP_MODE_SV32X4: Sv32x4 (2-bit extension of Sv32), when fctl.GXL == 1
+ * @RISCV_IOMMU_DC_IOHGATP_MODE_SV39X4: Sv39x4 (2-bit extension of Sv39), when fctl.GXL == 0
+ * @RISCV_IOMMU_DC_IOHGATP_MODE_SV48X4: Sv48x4 (2-bit extension of Sv48), when fctl.GXL == 0
+ * @RISCV_IOMMU_DC_IOHGATP_MODE_SV57X4: Sv57x4 (2-bit extension of Sv57), when fctl.GXL == 0
+ */
+enum riscv_iommu_dc_iohgatp_modes {
+ RISCV_IOMMU_DC_IOHGATP_MODE_BARE = 0,
+ RISCV_IOMMU_DC_IOHGATP_MODE_SV32X4 = 8,
+ RISCV_IOMMU_DC_IOHGATP_MODE_SV39X4 = 8,
+ RISCV_IOMMU_DC_IOHGATP_MODE_SV48X4 = 9,
+ RISCV_IOMMU_DC_IOHGATP_MODE_SV57X4 = 10
+};
+
+/* Translation attributes fields */
+#define RISCV_IOMMU_DC_TA_PSCID GENMASK_ULL(31,12)
+
+/* First-stage context fields */
+#define RISCV_IOMMU_DC_FSC_PPN RISCV_IOMMU_ATP_PPN_FIELD
+#define RISCV_IOMMU_DC_FSC_MODE RISCV_IOMMU_ATP_MODE_FIELD
+
+/**
+ * enum riscv_iommu_dc_fsc_atp_modes - First stage address translation/protection modes
+ * @RISCV_IOMMU_DC_FSC_MODE_BARE: No translation/protection
+ * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32: Sv32, when dc.tc.SXL == 1
+ * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV39: Sv39, when dc.tc.SXL == 0
+ * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV48: Sv48, when dc.tc.SXL == 0
+ * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV57: Sv57, when dc.tc.SXL == 0
+ * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8: 1lvl PDT, 8bit process ids
+ * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD17: 2lvl PDT, 17bit process ids
+ * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD20: 3lvl PDT, 20bit process ids
+ *
+ * FSC holds IOSATP when RISCV_IOMMU_DC_TC_PDTV is 0 and PDTP otherwise.
+ * IOSATP controls the first stage address translation (same as the satp register on
+ * the RISC-V MMU), and PDTP holds the process directory table, used to select a
+ * first stage page table based on a process id (for devices that support multiple
+ * process ids).
+ */
+enum riscv_iommu_dc_fsc_atp_modes {
+ RISCV_IOMMU_DC_FSC_MODE_BARE = 0,
+ RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 = 8,
+ RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV39 = 8,
+ RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV48 = 9,
+ RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV57 = 10,
+ RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8 = 1,
+ RISCV_IOMMU_DC_FSC_PDTP_MODE_PD17 = 2,
+ RISCV_IOMMU_DC_FSC_PDTP_MODE_PD20 = 3
+};
+
+/* MSI page table pointer */
+#define RISCV_IOMMU_DC_MSIPTP_PPN RISCV_IOMMU_ATP_PPN_FIELD
+#define RISCV_IOMMU_DC_MSIPTP_MODE RISCV_IOMMU_ATP_MODE_FIELD
+#define RISCV_IOMMU_DC_MSIPTP_MODE_OFF 0
+#define RISCV_IOMMU_DC_MSIPTP_MODE_FLAT 1
+
+/* MSI address mask */
+#define RISCV_IOMMU_DC_MSI_ADDR_MASK GENMASK_ULL(51, 0)
+
+/* MSI address pattern */
+#define RISCV_IOMMU_DC_MSI_PATTERN GENMASK_ULL(51, 0)
+
+/**
+ * struct riscv_iommu_pc - Process Context
+ * @ta: Translation Attributes
+ * @fsc: First stage context
+ *
+ * This structure is used for leaf nodes on the Process Directory Table
+ * See section 2.3 for more details
+ */
+struct riscv_iommu_pc {
+ u64 ta;
+ u64 fsc;
+};
+
+/* Translation attributes fields */
+#define RISCV_IOMMU_PC_TA_V BIT_ULL(0)
+#define RISCV_IOMMU_PC_TA_ENS BIT_ULL(1)
+#define RISCV_IOMMU_PC_TA_SUM BIT_ULL(2)
+#define RISCV_IOMMU_PC_TA_PSCID GENMASK_ULL(31, 12)
+
+/* First stage context fields */
+#define RISCV_IOMMU_PC_FSC_PPN RISCV_IOMMU_ATP_PPN_FIELD
+#define RISCV_IOMMU_PC_FSC_MODE RISCV_IOMMU_ATP_MODE_FIELD
+
+/*
+ * Chapter 3: In-memory queue interface
+ */
+
+/**
+ * struct riscv_iommu_cmd - Generic I/O MMU command structure
+ * @dword0: Includes the opcode and the function identifier
+ * @dword1: Opcode specific data
+ *
+ * The commands are interpreted as two 64bit fields, where the first
+ * 7bits of the first field are the opcode which also defines the
+ * command's format, followed by a 3bit field that specifies the
+ * function invoked by that command, and the rest is opcode-specific.
+ * This is a generic struct which will be populated differently
+ * according to each command. For more infos on the commands and
+ * the command queue check section 3.1.
+ */
+struct riscv_iommu_command {
+ u64 dword0;
+ u64 dword1;
+};
+
+/* Fields on dword0, common for all commands */
+#define RISCV_IOMMU_CMD_OPCODE GENMASK_ULL(6, 0)
+#define RISCV_IOMMU_CMD_FUNC GENMASK_ULL(9, 7)
+
+/* 3.1.1 I/O MMU Page-table cache invalidation */
+/* Fields on dword0 */
+#define RISCV_IOMMU_CMD_IOTINVAL_OPCODE 1
+#define RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA 0
+#define RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA 1
+#define RISCV_IOMMU_CMD_IOTINVAL_AV BIT_ULL(10)
+#define RISCV_IOMMU_CMD_IOTINVAL_PSCID GENMASK_ULL(31, 12)
+#define RISCV_IOMMU_CMD_IOTINVAL_PSCV BIT_ULL(32)
+#define RISCV_IOMMU_CMD_IOTINVAL_GV BIT_ULL(33)
+#define RISCV_IOMMU_CMD_IOTINVAL_GSCID GENMASK_ULL(59, 44)
+/* dword1 is the address, 4K-alligned and shifted to the right by
+ * two bits. */
+
+/* 3.1.2 I/O MMU Command Queue Fences */
+/* Fields on dword0 */
+#define RISCV_IOMMU_CMD_IOFENCE_OPCODE 2
+#define RISCV_IOMMU_CMD_IOFENCE_FUNC_C 0
+#define RISCV_IOMMU_CMD_IOFENCE_AV BIT_ULL(10)
+#define RISCV_IOMMU_CMD_IOFENCE_WSI BIT_ULL(11)
+#define RISCV_IOMMU_CMD_IOFENCE_PR BIT_ULL(12)
+#define RISCV_IOMMU_CMD_IOFENCE_PW BIT_ULL(13)
+#define RISCV_IOMMU_CMD_IOFENCE_DATA GENMASK_ULL(63, 32)
+/* dword1 is the address, word-size alligned and shifted to the
+ * right by two bits. */
+
+/* 3.1.3 I/O MMU Directory cache invalidation */
+/* Fields on dword0 */
+#define RISCV_IOMMU_CMD_IODIR_OPCODE 3
+#define RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_DDT 0
+#define RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_PDT 1
+#define RISCV_IOMMU_CMD_IODIR_PID GENMASK_ULL(31, 12)
+#define RISCV_IOMMU_CMD_IODIR_DV BIT_ULL(33)
+#define RISCV_IOMMU_CMD_IODIR_DID GENMASK_ULL(63, 40)
+/* dword1 is reserved for standard use */
+
+/* 3.1.4 I/O MMU PCIe ATS */
+/* Fields on dword0 */
+#define RISCV_IOMMU_CMD_ATS_OPCODE 4
+#define RISCV_IOMMU_CMD_ATS_FUNC_INVAL 0
+#define RISCV_IOMMU_CMD_ATS_FUNC_PRGR 1
+#define RISCV_IOMMU_CMD_ATS_PID GENMASK_ULL(31, 12)
+#define RISCV_IOMMU_CMD_ATS_PV BIT_ULL(32)
+#define RISCV_IOMMU_CMD_ATS_DSV BIT_ULL(33)
+#define RISCV_IOMMU_CMD_ATS_RID GENMASK_ULL(55, 40)
+#define RISCV_IOMMU_CMD_ATS_DSEG GENMASK_ULL(63, 56)
+/* dword1 is the ATS payload, two different payload types for INVAL and PRGR */
+
+/* ATS.INVAL payload*/
+#define RISCV_IOMMU_CMD_ATS_INVAL_G BIT_ULL(0)
+/* Bits 1 - 10 are zeroed */
+#define RISCV_IOMMU_CMD_ATS_INVAL_S BIT_ULL(11)
+#define RISCV_IOMMU_CMD_ATS_INVAL_UADDR GENMASK_ULL(63, 12)
+
+/* ATS.PRGR payload */
+/* Bits 0 - 31 are zeroed */
+#define RISCV_IOMMU_CMD_ATS_PRGR_PRG_INDEX GENMASK_ULL(40, 32)
+/* Bits 41 - 43 are zeroed */
+#define RISCV_IOMMU_CMD_ATS_PRGR_RESP_CODE GENMASK_ULL(47, 44)
+#define RISCV_IOMMU_CMD_ATS_PRGR_DST_ID GENMASK_ULL(63, 48)
+
+/**
+ * struct riscv_iommu_fq_record - Fault/Event Queue Record
+ * @hdr: Header, includes fault/event cause, PID/DID, transaction type etc
+ * @_reserved: Low 32bits for custom use, high 32bits for standard use
+ * @iotval: Transaction-type/cause specific format
+ * @iotval2: Cause specific format
+ *
+ * The fault/event queue reports events and failures raised when
+ * processing transactions. Each record is a 32byte structure where
+ * the first dword has a fixed format for providing generic infos
+ * regarding the fault/event, and two more dwords are there for
+ * fault/event-specific information. For more details see section
+ * 3.2.
+ */
+struct riscv_iommu_fq_record {
+ u64 hdr;
+ u64 _reserved;
+ u64 iotval;
+ u64 iotval2;
+};
+
+/* Fields on header */
+#define RISCV_IOMMU_FQ_HDR_CAUSE GENMASK_ULL(11, 0)
+#define RISCV_IOMMU_FQ_HDR_PID GENMASK_ULL(31, 12)
+#define RISCV_IOMMU_FQ_HDR_PV BIT_ULL(32)
+#define RISCV_IOMMU_FQ_HDR_PRIV BIT_ULL(33)
+#define RISCV_IOMMU_FQ_HDR_TTYPE GENMASK_ULL(39, 34)
+#define RISCV_IOMMU_FQ_HDR_DID GENMASK_ULL(63, 40)
+
+/**
+ * enum riscv_iommu_fq_causes - Fault/event cause values
+ * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT: Instruction access fault
+ * @RISCV_IOMMU_FQ_CAUSE_RD_ADDR_MISALIGNED: Read address misaligned
+ * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT: Read load fault
+ * @RISCV_IOMMU_FQ_CAUSE_WR_ADDR_MISALIGNED: Write/AMO address misaligned
+ * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT: Write/AMO access fault
+ * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT_S: Instruction page fault
+ * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S: Read page fault
+ * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S: Write/AMO page fault
+ * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT_VS: Instruction guest page fault
+ * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS: Read guest page fault
+ * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS: Write/AMO guest page fault
+ * @RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED: All inbound transactions disallowed
+ * @RISCV_IOMMU_FQ_CAUSE_DDT_LOAD_FAULT: DDT entry load access fault
+ * @RISCV_IOMMU_FQ_CAUSE_DDT_INVALID: DDT entry invalid
+ * @RISCV_IOMMU_FQ_CAUSE_DDT_MISCONFIGURED: DDT entry misconfigured
+ * @RISCV_IOMMU_FQ_CAUSE_TTYPE_BLOCKED: Transaction type disallowed
+ * @RISCV_IOMMU_FQ_CAUSE_MSI_LOAD_FAULT: MSI PTE load access fault
+ * @RISCV_IOMMU_FQ_CAUSE_MSI_INVALID: MSI PTE invalid
+ * @RISCV_IOMMU_FQ_CAUSE_MSI_MISCONFIGURED: MSI PTE misconfigured
+ * @RISCV_IOMMU_FQ_CAUSE_MRIF_FAULT: MRIF access fault
+ * @RISCV_IOMMU_FQ_CAUSE_PDT_LOAD_FAULT: PDT entry load access fault
+ * @RISCV_IOMMU_FQ_CAUSE_PDT_INVALID: PDT entry invalid
+ * @RISCV_IOMMU_FQ_CAUSE_PDT_MISCONFIGURED: PDT entry misconfigured
+ * @RISCV_IOMMU_FQ_CAUSE_DDT_CORRUPTED: DDT data corruption
+ * @RISCV_IOMMU_FQ_CAUSE_PDT_CORRUPTED: PDT data corruption
+ * @RISCV_IOMMU_FQ_CAUSE_MSI_PT_CORRUPTED: MSI page table data corruption
+ * @RISCV_IOMMU_FQ_CAUSE_MRIF_CORRUIPTED: MRIF data corruption
+ * @RISCV_IOMMU_FQ_CAUSE_INTERNAL_DP_ERROR: Internal data path error
+ * @RISCV_IOMMU_FQ_CAUSE_MSI_WR_FAULT: IOMMU MSI write access fault
+ * @RISCV_IOMMU_FQ_CAUSE_PT_CORRUPTED: First/second stage page table data corruption
+ *
+ * Values are on table 11 of the spec, encodings 275 - 2047 are reserved for standard
+ * use, and 2048 - 4095 for custom use.
+ */
+enum riscv_iommu_fq_causes {
+ RISCV_IOMMU_FQ_CAUSE_INST_FAULT = 1,
+ RISCV_IOMMU_FQ_CAUSE_RD_ADDR_MISALIGNED = 4,
+ RISCV_IOMMU_FQ_CAUSE_RD_FAULT = 5,
+ RISCV_IOMMU_FQ_CAUSE_WR_ADDR_MISALIGNED = 6,
+ RISCV_IOMMU_FQ_CAUSE_WR_FAULT = 7,
+ RISCV_IOMMU_FQ_CAUSE_INST_FAULT_S = 12,
+ RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S = 13,
+ RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S = 15,
+ RISCV_IOMMU_FQ_CAUSE_INST_FAULT_VS = 20,
+ RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS = 21,
+ RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS = 23,
+ RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED = 256,
+ RISCV_IOMMU_FQ_CAUSE_DDT_LOAD_FAULT = 257,
+ RISCV_IOMMU_FQ_CAUSE_DDT_INVALID = 258,
+ RISCV_IOMMU_FQ_CAUSE_DDT_MISCONFIGURED = 259,
+ RISCV_IOMMU_FQ_CAUSE_TTYPE_BLOCKED = 260,
+ RISCV_IOMMU_FQ_CAUSE_MSI_LOAD_FAULT = 261,
+ RISCV_IOMMU_FQ_CAUSE_MSI_INVALID = 262,
+ RISCV_IOMMU_FQ_CAUSE_MSI_MISCONFIGURED = 263,
+ RISCV_IOMMU_FQ_CAUSE_MRIF_FAULT = 264,
+ RISCV_IOMMU_FQ_CAUSE_PDT_LOAD_FAULT = 265,
+ RISCV_IOMMU_FQ_CAUSE_PDT_INVALID = 266,
+ RISCV_IOMMU_FQ_CAUSE_PDT_MISCONFIGURED = 267,
+ RISCV_IOMMU_FQ_CAUSE_DDT_CORRUPTED = 268,
+ RISCV_IOMMU_FQ_CAUSE_PDT_CORRUPTED = 269,
+ RISCV_IOMMU_FQ_CAUSE_MSI_PT_CORRUPTED = 270,
+ RISCV_IOMMU_FQ_CAUSE_MRIF_CORRUIPTED = 271,
+ RISCV_IOMMU_FQ_CAUSE_INTERNAL_DP_ERROR = 272,
+ RISCV_IOMMU_FQ_CAUSE_MSI_WR_FAULT = 273,
+ RISCV_IOMMU_FQ_CAUSE_PT_CORRUPTED = 274
+};
+
+/**
+ * enum riscv_iommu_fq_ttypes: Fault/event transaction types
+ * @RISCV_IOMMU_FQ_TTYPE_NONE: None. Fault not caused by an inbound transaction.
+ * @RISCV_IOMMU_FQ_TTYPE_UADDR_INST_FETCH: Instruction fetch from untranslated address
+ * @RISCV_IOMMU_FQ_TTYPE_UADDR_RD: Read from untranslated address
+ * @RISCV_IOMMU_FQ_TTYPE_UADDR_WR: Write/AMO to untranslated address
+ * @RISCV_IOMMU_FQ_TTYPE_TADDR_INST_FETCH: Instruction fetch from translated address
+ * @RISCV_IOMMU_FQ_TTYPE_TADDR_RD: Read from translated address
+ * @RISCV_IOMMU_FQ_TTYPE_TADDR_WR: Write/AMO to translated address
+ * @RISCV_IOMMU_FQ_TTYPE_PCIE_ATS_REQ: PCIe ATS translation request
+ * @RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ: PCIe message request
+ *
+ * Values are on table 12 of the spec, type 4 and 10 - 31 are reserved for standard use
+ * and 31 - 63 for custom use.
+ */
+enum riscv_iommu_fq_ttypes {
+ RISCV_IOMMU_FQ_TTYPE_NONE = 0,
+ RISCV_IOMMU_FQ_TTYPE_UADDR_INST_FETCH = 1,
+ RISCV_IOMMU_FQ_TTYPE_UADDR_RD = 2,
+ RISCV_IOMMU_FQ_TTYPE_UADDR_WR = 3,
+ RISCV_IOMMU_FQ_TTYPE_TADDR_INST_FETCH = 5,
+ RISCV_IOMMU_FQ_TTYPE_TADDR_RD = 6,
+ RISCV_IOMMU_FQ_TTYPE_TADDR_WR = 7,
+ RISCV_IOMMU_FQ_TTYPE_PCIE_ATS_REQ = 8,
+ RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ = 9,
+};
+
+/**
+ * struct riscv_iommu_pq_record - PCIe Page Request record
+ * @hdr: Header, includes PID, DID etc
+ * @payload: Holds the page address, request group and permission bits
+ *
+ * For more infos on the PCIe Page Request queue see chapter 3.3.
+ */
+struct riscv_iommu_pq_record {
+ u64 hdr;
+ u64 payload;
+};
+
+/* Header fields */
+#define RISCV_IOMMU_PREQ_HDR_PID GENMASK_ULL(31, 12)
+#define RISCV_IOMMU_PREQ_HDR_PV BIT_ULL(32)
+#define RISCV_IOMMU_PREQ_HDR_PRIV BIT_ULL(33)
+#define RISCV_IOMMU_PREQ_HDR_EXEC BIT_ULL(34)
+#define RISCV_IOMMU_PREQ_HDR_DID GENMASK_ULL(63, 40)
+
+/* Payload fields */
+#define RISCV_IOMMU_PREQ_PAYLOAD_R BIT_ULL(0)
+#define RISCV_IOMMU_PREQ_PAYLOAD_W BIT_ULL(1)
+#define RISCV_IOMMU_PREQ_PAYLOAD_L BIT_ULL(2)
+#define RISCV_IOMMU_PREQ_PAYLOAD_M GENMASK_ULL(2, 0) /* Mask of RWL for convenience */
+#define RISCV_IOMMU_PREQ_PRG_INDEX GENMASK_ULL(11, 3)
+#define RISCV_IOMMU_PREQ_UADDR GENMASK_ULL(63, 12)
+
+/**
+ * struct riscv_iommu_msi_pte - MSI Page Table Entry
+ * @pte: MSI PTE
+ * @mrif_info: Memory-resident interrupt file info
+ *
+ * The MSI Page Table is used for virtualizing MSIs, so that when
+ * a device sends an MSI to a guest, the IOMMU can reroute it
+ * by translating the MSI address, either to a guest interrupt file
+ * or a memory resident interrupt file (MRIF). Note that this page table
+ * is an array of MSI PTEs, not a multi-level pt, each entry
+ * is a leaf entry. For more infos check out the the AIA spec, chapter 9.5.
+ *
+ * Also in basic mode the mrif_info field is ignored by the IOMMU and can
+ * be used by software, any other reserved fields on pte must be zeroed-out
+ * by software.
+ */
+struct riscv_iommu_msi_pte {
+ u64 pte;
+ u64 mrif_info;
+};
+
+/* Fields on pte */
+#define RISCV_IOMMU_MSI_PTE_V BIT_ULL(0)
+#define RISCV_IOMMU_MSI_PTE_M GENMASK_ULL(2, 1)
+#define RISCV_IOMMU_MSI_PTE_MRIF_ADDR GENMASK_ULL(53, 7) /* When M == 1 (MRIF mode) */
+#define RISCV_IOMMU_MSI_PTE_PPN RISCV_IOMMU_PPN_FIELD /* When M == 3 (basic mode) */
+#define RISCV_IOMMU_MSI_PTE_C BIT_ULL(63)
+
+/* Fields on mrif_info */
+#define RISCV_IOMMU_MSI_MRIF_NID GENMASK_ULL(9, 0)
+#define RISCV_IOMMU_MSI_MRIF_NPPN RISCV_IOMMU_PPN_FIELD
+#define RISCV_IOMMU_MSI_MRIF_NID_MSB BIT_ULL(60)
+
+#endif /* _RISCV_IOMMU_BITS_H_ */
diff --git a/drivers/iommu/riscv/iommu-pci.c b/drivers/iommu/riscv/iommu-pci.c
new file mode 100644
index 000000000000..c91f963d7a29
--- /dev/null
+++ b/drivers/iommu/riscv/iommu-pci.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright © 2022-2023 Rivos Inc.
+ * Copyright © 2023 FORTH-ICS/CARV
+ *
+ * RISCV IOMMU as a PCIe device
+ *
+ * Authors
+ * Tomasz Jeznach <[email protected]>
+ * Nick Kossifidis <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/bitfield.h>
+
+#include "iommu.h"
+
+/* Rivos Inc. assigned PCI Vendor and Device IDs */
+#ifndef PCI_VENDOR_ID_RIVOS
+#define PCI_VENDOR_ID_RIVOS 0x1efd
+#endif
+
+#ifndef PCI_DEVICE_ID_RIVOS_IOMMU
+#define PCI_DEVICE_ID_RIVOS_IOMMU 0xedf1
+#endif
+
+static int riscv_iommu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct riscv_iommu_device *iommu;
+ int ret;
+
+ ret = pci_enable_device_mem(pdev);
+ if (ret < 0)
+ return ret;
+
+ ret = pci_request_mem_regions(pdev, KBUILD_MODNAME);
+ if (ret < 0)
+ goto fail;
+
+ ret = -ENOMEM;
+
+ iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
+ if (!iommu)
+ goto fail;
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM))
+ goto fail;
+
+ if (pci_resource_len(pdev, 0) < RISCV_IOMMU_REG_SIZE)
+ goto fail;
+
+ iommu->reg_phys = pci_resource_start(pdev, 0);
+ if (!iommu->reg_phys)
+ goto fail;
+
+ iommu->reg = devm_ioremap(dev, iommu->reg_phys, RISCV_IOMMU_REG_SIZE);
+ if (!iommu->reg)
+ goto fail;
+
+ iommu->dev = dev;
+ dev_set_drvdata(dev, iommu);
+
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ pci_set_master(pdev);
+
+ ret = riscv_iommu_init(iommu);
+ if (!ret)
+ return ret;
+
+ fail:
+ pci_clear_master(pdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ /* Note: devres_release_all() will release iommu and iommu->reg */
+ return ret;
+}
+
+static void riscv_iommu_pci_remove(struct pci_dev *pdev)
+{
+ riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
+ pci_clear_master(pdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static int riscv_iommu_suspend(struct device *dev)
+{
+ dev_warn(dev, "RISC-V IOMMU PM not implemented");
+ return -ENODEV;
+}
+
+static int riscv_iommu_resume(struct device *dev)
+{
+ dev_warn(dev, "RISC-V IOMMU PM not implemented");
+ return -ENODEV;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(riscv_iommu_pm_ops, riscv_iommu_suspend,
+ riscv_iommu_resume);
+
+static const struct pci_device_id riscv_iommu_pci_tbl[] = {
+ {PCI_VENDOR_ID_RIVOS, PCI_DEVICE_ID_RIVOS_IOMMU,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, riscv_iommu_pci_tbl);
+
+static const struct of_device_id riscv_iommu_of_match[] = {
+ {.compatible = "riscv,pci-iommu",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, riscv_iommu_of_match);
+
+static struct pci_driver riscv_iommu_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = riscv_iommu_pci_tbl,
+ .probe = riscv_iommu_pci_probe,
+ .remove = riscv_iommu_pci_remove,
+ .driver = {
+ .pm = pm_sleep_ptr(&riscv_iommu_pm_ops),
+ .of_match_table = riscv_iommu_of_match,
+ },
+};
+
+module_driver(riscv_iommu_pci_driver, pci_register_driver, pci_unregister_driver);
diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c
new file mode 100644
index 000000000000..e4e8ca6711e7
--- /dev/null
+++ b/drivers/iommu/riscv/iommu-platform.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RISC-V IOMMU as a platform device
+ *
+ * Copyright © 2023 FORTH-ICS/CARV
+ *
+ * Author: Nick Kossifidis <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/bitfield.h>
+
+#include "iommu-bits.h"
+#include "iommu.h"
+
+static int riscv_iommu_platform_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct riscv_iommu_device *iommu = NULL;
+ struct resource *res = NULL;
+ int ret = 0;
+
+ iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
+ if (!iommu)
+ return -ENOMEM;
+
+ iommu->dev = dev;
+ dev_set_drvdata(dev, iommu);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "could not find resource for register region\n");
+ return -EINVAL;
+ }
+
+ iommu->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(iommu->reg)) {
+ ret = dev_err_probe(dev, PTR_ERR(iommu->reg),
+ "could not map register region\n");
+ goto fail;
+ };
+
+ iommu->reg_phys = res->start;
+
+ ret = -ENODEV;
+
+ /* Sanity check: Did we get the whole register space ? */
+ if ((res->end - res->start + 1) < RISCV_IOMMU_REG_SIZE) {
+ dev_err(dev, "device region smaller than register file (0x%llx)\n",
+ res->end - res->start);
+ goto fail;
+ }
+
+ dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+
+ return riscv_iommu_init(iommu);
+
+ fail:
+ /* Note: devres_release_all() will release iommu and iommu->reg */
+ return ret;
+};
+
+static void riscv_iommu_platform_remove(struct platform_device *pdev)
+{
+ riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
+};
+
+static void riscv_iommu_platform_shutdown(struct platform_device *pdev)
+{
+ return;
+};
+
+static const struct of_device_id riscv_iommu_of_match[] = {
+ {.compatible = "riscv,iommu",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, riscv_iommu_of_match);
+
+static struct platform_driver riscv_iommu_platform_driver = {
+ .driver = {
+ .name = "riscv,iommu",
+ .of_match_table = riscv_iommu_of_match,
+ .suppress_bind_attrs = true,
+ },
+ .probe = riscv_iommu_platform_probe,
+ .remove_new = riscv_iommu_platform_remove,
+ .shutdown = riscv_iommu_platform_shutdown,
+};
+
+module_driver(riscv_iommu_platform_driver, platform_driver_register,
+ platform_driver_unregister);
diff --git a/drivers/iommu/riscv/iommu.c b/drivers/iommu/riscv/iommu.c
new file mode 100644
index 000000000000..8c236242e2cc
--- /dev/null
+++ b/drivers/iommu/riscv/iommu.c
@@ -0,0 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * IOMMU API for RISC-V architected Ziommu implementations.
+ *
+ * Copyright © 2022-2023 Rivos Inc.
+ * Copyright © 2023 FORTH-ICS/CARV
+ *
+ * Authors
+ * Tomasz Jeznach <[email protected]>
+ * Nick Kossifidis <[email protected]>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/pci-ats.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/iommu.h>
+#include <linux/irqdomain.h>
+#include <linux/platform_device.h>
+#include <linux/dma-map-ops.h>
+#include <asm/page.h>
+
+#include "../dma-iommu.h"
+#include "../iommu-sva.h"
+#include "iommu.h"
+
+#include <asm/csr.h>
+#include <asm/delay.h>
+
+MODULE_DESCRIPTION("IOMMU driver for RISC-V architected Ziommu implementations");
+MODULE_AUTHOR("Tomasz Jeznach <[email protected]>");
+MODULE_AUTHOR("Nick Kossifidis <[email protected]>");
+MODULE_ALIAS("riscv-iommu");
+MODULE_LICENSE("GPL v2");
+
+/* Global IOMMU params. */
+static int ddt_mode = RISCV_IOMMU_DDTP_MODE_BARE;
+module_param(ddt_mode, int, 0644);
+MODULE_PARM_DESC(ddt_mode, "Device Directory Table mode.");
+
+/* IOMMU PSCID allocation namespace. */
+#define RISCV_IOMMU_MAX_PSCID (1U << 20)
+static DEFINE_IDA(riscv_iommu_pscids);
+
+/* 1 second */
+#define RISCV_IOMMU_TIMEOUT riscv_timebase
+
+/* RISC-V IOMMU PPN <> PHYS address conversions, PHYS <=> PPN[53:10] */
+#define phys_to_ppn(va) (((va) >> 2) & (((1ULL << 44) - 1) << 10))
+#define ppn_to_phys(pn) (((pn) << 2) & (((1ULL << 44) - 1) << 12))
+
+#define iommu_domain_to_riscv(iommu_domain) \
+ container_of(iommu_domain, struct riscv_iommu_domain, domain)
+
+#define iommu_device_to_riscv(iommu_device) \
+ container_of(iommu_device, struct riscv_iommu, iommu)
+
+static const struct iommu_domain_ops riscv_iommu_domain_ops;
+static const struct iommu_ops riscv_iommu_ops;
+
+/*
+ * Register device for IOMMU tracking.
+ */
+static void riscv_iommu_add_device(struct riscv_iommu_device *iommu, struct device *dev)
+{
+ struct riscv_iommu_endpoint *ep, *rb_ep;
+ struct rb_node **new_node, *parent_node = NULL;
+
+ mutex_lock(&iommu->eps_mutex);
+
+ ep = dev_iommu_priv_get(dev);
+
+ new_node = &(iommu->eps.rb_node);
+ while (*new_node) {
+ rb_ep = rb_entry(*new_node, struct riscv_iommu_endpoint, node);
+ parent_node = *new_node;
+ if (rb_ep->devid > ep->devid) {
+ new_node = &((*new_node)->rb_left);
+ } else if (rb_ep->devid < ep->devid) {
+ new_node = &((*new_node)->rb_right);
+ } else {
+ dev_warn(dev, "device %u already in the tree\n", ep->devid);
+ break;
+ }
+ }
+
+ rb_link_node(&ep->node, parent_node, new_node);
+ rb_insert_color(&ep->node, &iommu->eps);
+
+ mutex_unlock(&iommu->eps_mutex);
+}
+
+/*
+ * Endpoint management
+ */
+
+static int riscv_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
+{
+ return iommu_fwspec_add_ids(dev, args->args, 1);
+}
+
+static bool riscv_iommu_capable(struct device *dev, enum iommu_cap cap)
+{
+ switch (cap) {
+ case IOMMU_CAP_CACHE_COHERENCY:
+ case IOMMU_CAP_PRE_BOOT_PROTECTION:
+ return true;
+
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static struct iommu_device *riscv_iommu_probe_device(struct device *dev)
+{
+ struct riscv_iommu_device *iommu;
+ struct riscv_iommu_endpoint *ep;
+ struct iommu_fwspec *fwspec;
+
+ fwspec = dev_iommu_fwspec_get(dev);
+ if (!fwspec || fwspec->ops != &riscv_iommu_ops ||
+ !fwspec->iommu_fwnode || !fwspec->iommu_fwnode->dev)
+ return ERR_PTR(-ENODEV);
+
+ iommu = dev_get_drvdata(fwspec->iommu_fwnode->dev);
+ if (!iommu)
+ return ERR_PTR(-ENODEV);
+
+ if (dev_iommu_priv_get(dev))
+ return &iommu->iommu;
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&ep->lock);
+ INIT_LIST_HEAD(&ep->domain);
+
+ if (dev_is_pci(dev)) {
+ ep->devid = pci_dev_id(to_pci_dev(dev));
+ ep->domid = pci_domain_nr(to_pci_dev(dev)->bus);
+ } else {
+ /* TODO: Make this generic, for now hardcode domain id to 0 */
+ ep->devid = fwspec->ids[0];
+ ep->domid = 0;
+ }
+
+ ep->iommu = iommu;
+ ep->dev = dev;
+
+ dev_info(iommu->dev, "adding device to iommu with devid %i in domain %i\n",
+ ep->devid, ep->domid);
+
+ dev_iommu_priv_set(dev, ep);
+ riscv_iommu_add_device(iommu, dev);
+
+ return &iommu->iommu;
+}
+
+static void riscv_iommu_probe_finalize(struct device *dev)
+{
+ set_dma_ops(dev, NULL);
+ iommu_setup_dma_ops(dev, 0, U64_MAX);
+}
+
+static void riscv_iommu_release_device(struct device *dev)
+{
+ struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
+ struct riscv_iommu_device *iommu = ep->iommu;
+
+ dev_info(dev, "device with devid %i released\n", ep->devid);
+
+ mutex_lock(&ep->lock);
+ list_del(&ep->domain);
+ mutex_unlock(&ep->lock);
+
+ /* Remove endpoint from IOMMU tracking structures */
+ mutex_lock(&iommu->eps_mutex);
+ rb_erase(&ep->node, &iommu->eps);
+ mutex_unlock(&iommu->eps_mutex);
+
+ set_dma_ops(dev, NULL);
+ dev_iommu_priv_set(dev, NULL);
+
+ kfree(ep);
+}
+
+static struct iommu_group *riscv_iommu_device_group(struct device *dev)
+{
+ if (dev_is_pci(dev))
+ return pci_device_group(dev);
+ return generic_device_group(dev);
+}
+
+static void riscv_iommu_get_resv_regions(struct device *dev, struct list_head *head)
+{
+ iommu_dma_get_resv_regions(dev, head);
+}
+
+/*
+ * Domain management
+ */
+
+static struct iommu_domain *riscv_iommu_domain_alloc(unsigned type)
+{
+ struct riscv_iommu_domain *domain;
+
+ if (type != IOMMU_DOMAIN_IDENTITY &&
+ type != IOMMU_DOMAIN_BLOCKED)
+ return NULL;
+
+ domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+ if (!domain)
+ return NULL;
+
+ mutex_init(&domain->lock);
+ INIT_LIST_HEAD(&domain->endpoints);
+
+ domain->domain.ops = &riscv_iommu_domain_ops;
+ domain->mode = RISCV_IOMMU_DC_FSC_MODE_BARE;
+ domain->pscid = ida_alloc_range(&riscv_iommu_pscids, 1,
+ RISCV_IOMMU_MAX_PSCID, GFP_KERNEL);
+
+ printk("domain type %x alloc %u\n", type, domain->pscid);
+
+ return &domain->domain;
+}
+
+static void riscv_iommu_domain_free(struct iommu_domain *iommu_domain)
+{
+ struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
+
+ if (!list_empty(&domain->endpoints)) {
+ pr_warn("IOMMU domain is not empty!\n");
+ }
+
+ if (domain->pgd_root)
+ free_pages((unsigned long)domain->pgd_root, 0);
+
+ if ((int)domain->pscid > 0)
+ ida_free(&riscv_iommu_pscids, domain->pscid);
+
+ printk("domain free %u\n", domain->pscid);
+
+ kfree(domain);
+}
+
+static int riscv_iommu_domain_finalize(struct riscv_iommu_domain *domain,
+ struct riscv_iommu_device *iommu)
+{
+ struct iommu_domain_geometry *geometry;
+
+ /* Domain assigned to another iommu */
+ if (domain->iommu && domain->iommu != iommu)
+ return -EINVAL;
+ /* Domain already initialized */
+ else if (domain->iommu)
+ return 0;
+
+ /*
+ * TODO: Before using VA_BITS and satp_mode here, verify they
+ * are supported by the iommu, through the capabilities register.
+ */
+
+ geometry = &domain->domain.geometry;
+
+ /*
+ * Note: RISC-V Privilege spec mandates that virtual addresses
+ * need to be sign-extended, so if (VA_BITS - 1) is set, all
+ * bits >= VA_BITS need to also be set or else we'll get a
+ * page fault. However the code that creates the mappings
+ * above us (e.g. iommu_dma_alloc_iova()) won't do that for us
+ * for now, so we'll end up with invalid virtual addresses
+ * to map. As a workaround until we get this sorted out
+ * limit the available virtual addresses to VA_BITS - 1.
+ */
+ geometry->aperture_start = 0;
+ geometry->aperture_end = DMA_BIT_MASK(VA_BITS - 1);
+ geometry->force_aperture = true;
+
+ domain->iommu = iommu;
+
+ if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
+ return 0;
+
+ /* TODO: Fix this for RV32 */
+ domain->mode = satp_mode >> 60;
+ domain->pgd_root = (pgd_t *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, 0);
+
+ if (!domain->pgd_root)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int riscv_iommu_attach_dev(struct iommu_domain *iommu_domain, struct device *dev)
+{
+ struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
+ struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
+ int ret;
+
+ /* PSCID not valid */
+ if ((int)domain->pscid < 0)
+ return -ENOMEM;
+
+ mutex_lock(&domain->lock);
+ mutex_lock(&ep->lock);
+
+ if (!list_empty(&ep->domain)) {
+ dev_warn(dev, "endpoint already attached to a domain. dropping\n");
+ list_del_init(&ep->domain);
+ }
+
+ /* allocate root pages, initialize io-pgtable ops, etc. */
+ ret = riscv_iommu_domain_finalize(domain, ep->iommu);
+ if (ret < 0) {
+ dev_err(dev, "can not finalize domain: %d\n", ret);
+ mutex_unlock(&ep->lock);
+ mutex_unlock(&domain->lock);
+ return ret;
+ }
+
+ if (ep->iommu->ddt_mode != RISCV_IOMMU_DDTP_MODE_BARE ||
+ domain->domain.type != IOMMU_DOMAIN_IDENTITY) {
+ dev_warn(dev, "domain type %d not supported\n",
+ domain->domain.type);
+ return -ENODEV;
+ }
+
+ list_add_tail(&ep->domain, &domain->endpoints);
+ mutex_unlock(&ep->lock);
+ mutex_unlock(&domain->lock);
+
+ dev_info(dev, "domain type %d attached w/ PSCID %u\n",
+ domain->domain.type, domain->pscid);
+
+ return 0;
+}
+
+static void riscv_iommu_flush_iotlb_range(struct iommu_domain *iommu_domain,
+ unsigned long *start, unsigned long *end,
+ size_t *pgsize)
+{
+ /* Command interface not implemented */
+}
+
+static void riscv_iommu_flush_iotlb_all(struct iommu_domain *iommu_domain)
+{
+ riscv_iommu_flush_iotlb_range(iommu_domain, NULL, NULL, NULL);
+}
+
+static void riscv_iommu_iotlb_sync(struct iommu_domain *iommu_domain,
+ struct iommu_iotlb_gather *gather)
+{
+ riscv_iommu_flush_iotlb_range(iommu_domain, &gather->start, &gather->end,
+ &gather->pgsize);
+}
+
+static void riscv_iommu_iotlb_sync_map(struct iommu_domain *iommu_domain,
+ unsigned long iova, size_t size)
+{
+ unsigned long end = iova + size - 1;
+ /*
+ * Given we don't know the page size used by this range, we assume the
+ * smallest page size to ensure all possible entries are flushed from
+ * the IOATC.
+ */
+ size_t pgsize = PAGE_SIZE;
+ riscv_iommu_flush_iotlb_range(iommu_domain, &iova, &end, &pgsize);
+}
+
+static int riscv_iommu_map_pages(struct iommu_domain *iommu_domain,
+ unsigned long iova, phys_addr_t phys,
+ size_t pgsize, size_t pgcount, int prot,
+ gfp_t gfp, size_t *mapped)
+{
+ struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
+
+ if (domain->domain.type == IOMMU_DOMAIN_IDENTITY) {
+ *mapped = pgsize * pgcount;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static size_t riscv_iommu_unmap_pages(struct iommu_domain *iommu_domain,
+ unsigned long iova, size_t pgsize,
+ size_t pgcount, struct iommu_iotlb_gather *gather)
+{
+ struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
+
+ if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
+ return pgsize * pgcount;
+
+ return 0;
+}
+
+static phys_addr_t riscv_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
+ dma_addr_t iova)
+{
+ struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
+
+ if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
+ return (phys_addr_t) iova;
+
+ return 0;
+}
+
+/*
+ * Translation mode setup
+ */
+
+static u64 riscv_iommu_get_ddtp(struct riscv_iommu_device *iommu)
+{
+ u64 ddtp;
+ cycles_t end_cycles = RISCV_IOMMU_TIMEOUT + get_cycles();
+
+ /* Wait for DDTP.BUSY to be cleared and return latest value */
+ do {
+ ddtp = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_DDTP);
+ if (!(ddtp & RISCV_IOMMU_DDTP_BUSY))
+ break;
+ cpu_relax();
+ } while (get_cycles() < end_cycles);
+
+ return ddtp;
+}
+
+static void riscv_iommu_ddt_cleanup(struct riscv_iommu_device *iommu)
+{
+ /* TODO: teardown whole device directory tree. */
+ if (iommu->ddtp) {
+ if (iommu->ddtp_in_iomem) {
+ iounmap((void *)iommu->ddtp);
+ } else
+ free_page(iommu->ddtp);
+ iommu->ddtp = 0;
+ }
+}
+
+static int riscv_iommu_enable(struct riscv_iommu_device *iommu, unsigned requested_mode)
+{
+ struct device *dev = iommu->dev;
+ u64 ddtp = 0;
+ u64 ddtp_paddr = 0;
+ unsigned mode = requested_mode;
+ unsigned mode_readback = 0;
+
+ ddtp = riscv_iommu_get_ddtp(iommu);
+ if (ddtp & RISCV_IOMMU_DDTP_BUSY)
+ return -EBUSY;
+
+ /* Disallow state transtion from xLVL to xLVL. */
+ switch (FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp)) {
+ case RISCV_IOMMU_DDTP_MODE_BARE:
+ case RISCV_IOMMU_DDTP_MODE_OFF:
+ break;
+ default:
+ if ((mode != RISCV_IOMMU_DDTP_MODE_BARE)
+ && (mode != RISCV_IOMMU_DDTP_MODE_OFF))
+ return -EINVAL;
+ break;
+ }
+
+ retry:
+ switch (mode) {
+ case RISCV_IOMMU_DDTP_MODE_BARE:
+ case RISCV_IOMMU_DDTP_MODE_OFF:
+ riscv_iommu_ddt_cleanup(iommu);
+ ddtp = FIELD_PREP(RISCV_IOMMU_DDTP_MODE, mode);
+ break;
+ case RISCV_IOMMU_DDTP_MODE_1LVL:
+ case RISCV_IOMMU_DDTP_MODE_2LVL:
+ case RISCV_IOMMU_DDTP_MODE_3LVL:
+ if (!iommu->ddtp) {
+ /*
+ * We haven't initialized ddtp yet, since it's WARL make
+ * sure that we don't have a hardwired PPN field there
+ * that points to i/o memory instead.
+ */
+ riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, 0);
+ ddtp = riscv_iommu_get_ddtp(iommu);
+ ddtp_paddr = ppn_to_phys(ddtp);
+ if (ddtp_paddr) {
+ dev_warn(dev, "ddtp at 0x%llx\n", ddtp_paddr);
+ iommu->ddtp =
+ (unsigned long)ioremap(ddtp_paddr, PAGE_SIZE);
+ iommu->ddtp_in_iomem = true;
+ } else {
+ iommu->ddtp = get_zeroed_page(GFP_KERNEL);
+ }
+ }
+ if (!iommu->ddtp)
+ return -ENOMEM;
+
+ ddtp = FIELD_PREP(RISCV_IOMMU_DDTP_MODE, mode) |
+ phys_to_ppn(__pa(iommu->ddtp));
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, ddtp);
+ ddtp = riscv_iommu_get_ddtp(iommu);
+ if (ddtp & RISCV_IOMMU_DDTP_BUSY) {
+ dev_warn(dev, "timeout when setting ddtp (ddt mode: %i)\n", mode);
+ return -EBUSY;
+ }
+
+ mode_readback = FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp);
+ dev_info(dev, "mode_readback: %i, mode: %i\n", mode_readback, mode);
+ if (mode_readback != mode) {
+ /*
+ * Mode field is WARL, an I/O MMU may support a subset of
+ * directory table levels in which case if we tried to set
+ * an unsupported number of levels we'll readback either
+ * a valid xLVL or off/bare. If we got off/bare, try again
+ * with a smaller xLVL.
+ */
+ if (mode_readback < RISCV_IOMMU_DDTP_MODE_1LVL &&
+ mode > RISCV_IOMMU_DDTP_MODE_1LVL) {
+ mode--;
+ goto retry;
+ }
+
+ /*
+ * We tried all supported xLVL modes and still got off/bare instead,
+ * an I/O MMU must support at least one supported xLVL mode so something
+ * went very wrong.
+ */
+ if (mode_readback < RISCV_IOMMU_DDTP_MODE_1LVL &&
+ mode == RISCV_IOMMU_DDTP_MODE_1LVL)
+ goto fail;
+
+ /*
+ * We tried setting off or bare and got something else back, something
+ * went very wrong since off/bare is always legal.
+ */
+ if (mode < RISCV_IOMMU_DDTP_MODE_1LVL)
+ goto fail;
+
+ /*
+ * We tried setting an xLVL mode but got another xLVL mode that
+ * we don't support (e.g. a custom one).
+ */
+ if (mode_readback > RISCV_IOMMU_DDTP_MODE_MAX)
+ goto fail;
+
+ /* We tried setting an xLVL mode but got another supported xLVL mode */
+ mode = mode_readback;
+ }
+
+ if (mode != requested_mode)
+ dev_warn(dev, "unsupported DDT mode requested (%i), using %i instead\n",
+ requested_mode, mode);
+
+ iommu->ddt_mode = mode;
+ dev_info(dev, "ddt_mode: %i\n", iommu->ddt_mode);
+ return 0;
+
+ fail:
+ dev_err(dev, "failed to set DDT mode, tried: %i and got %i\n", mode,
+ mode_readback);
+ riscv_iommu_ddt_cleanup(iommu);
+ return -EINVAL;
+}
+
+/*
+ * Common I/O MMU driver probe/teardown
+ */
+
+static const struct iommu_domain_ops riscv_iommu_domain_ops = {
+ .free = riscv_iommu_domain_free,
+ .attach_dev = riscv_iommu_attach_dev,
+ .map_pages = riscv_iommu_map_pages,
+ .unmap_pages = riscv_iommu_unmap_pages,
+ .iova_to_phys = riscv_iommu_iova_to_phys,
+ .iotlb_sync = riscv_iommu_iotlb_sync,
+ .iotlb_sync_map = riscv_iommu_iotlb_sync_map,
+ .flush_iotlb_all = riscv_iommu_flush_iotlb_all,
+};
+
+static const struct iommu_ops riscv_iommu_ops = {
+ .owner = THIS_MODULE,
+ .pgsize_bitmap = SZ_4K | SZ_2M | SZ_512M,
+ .capable = riscv_iommu_capable,
+ .domain_alloc = riscv_iommu_domain_alloc,
+ .probe_device = riscv_iommu_probe_device,
+ .probe_finalize = riscv_iommu_probe_finalize,
+ .release_device = riscv_iommu_release_device,
+ .device_group = riscv_iommu_device_group,
+ .get_resv_regions = riscv_iommu_get_resv_regions,
+ .of_xlate = riscv_iommu_of_xlate,
+ .default_domain_ops = &riscv_iommu_domain_ops,
+};
+
+void riscv_iommu_remove(struct riscv_iommu_device *iommu)
+{
+ iommu_device_unregister(&iommu->iommu);
+ riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_OFF);
+}
+
+int riscv_iommu_init(struct riscv_iommu_device *iommu)
+{
+ struct device *dev = iommu->dev;
+ u32 fctl = 0;
+ int ret;
+
+ iommu->eps = RB_ROOT;
+
+ fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL);
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ if (!(cap & RISCV_IOMMU_CAP_END)) {
+ dev_err(dev, "IOMMU doesn't support Big Endian\n");
+ return -EIO;
+ } else if (!(fctl & RISCV_IOMMU_FCTL_BE)) {
+ fctl |= FIELD_PREP(RISCV_IOMMU_FCTL_BE, 1);
+ riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, fctl);
+ }
+#endif
+
+ /* Clear any pending interrupt flag. */
+ riscv_iommu_writel(iommu, RISCV_IOMMU_REG_IPSR,
+ RISCV_IOMMU_IPSR_CIP |
+ RISCV_IOMMU_IPSR_FIP |
+ RISCV_IOMMU_IPSR_PMIP | RISCV_IOMMU_IPSR_PIP);
+ spin_lock_init(&iommu->cq_lock);
+ mutex_init(&iommu->eps_mutex);
+
+ ret = riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_BARE);
+
+ if (ret) {
+ dev_err(dev, "cannot enable iommu device (%d)\n", ret);
+ goto fail;
+ }
+
+ ret = iommu_device_register(&iommu->iommu, &riscv_iommu_ops, dev);
+ if (ret) {
+ dev_err(dev, "cannot register iommu interface (%d)\n", ret);
+ iommu_device_sysfs_remove(&iommu->iommu);
+ goto fail;
+ }
+
+ return 0;
+ fail:
+ riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_OFF);
+ return ret;
+}
diff --git a/drivers/iommu/riscv/iommu.h b/drivers/iommu/riscv/iommu.h
new file mode 100644
index 000000000000..7baefd3630b3
--- /dev/null
+++ b/drivers/iommu/riscv/iommu.h
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2022-2023 Rivos Inc.
+ * Copyright © 2023 FORTH-ICS/CARV
+ *
+ * RISC-V Ziommu - IOMMU Interface Specification.
+ *
+ * Authors
+ * Tomasz Jeznach <[email protected]>
+ * Nick Kossifidis <[email protected]>
+ */
+
+#ifndef _RISCV_IOMMU_H_
+#define _RISCV_IOMMU_H_
+
+#include <linux/types.h>
+#include <linux/iova.h>
+#include <linux/io.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+#include <linux/iommu.h>
+#include <linux/io-pgtable.h>
+
+#include "iommu-bits.h"
+
+#define IOMMU_PAGE_SIZE_4K BIT_ULL(12)
+#define IOMMU_PAGE_SIZE_2M BIT_ULL(21)
+#define IOMMU_PAGE_SIZE_1G BIT_ULL(30)
+#define IOMMU_PAGE_SIZE_512G BIT_ULL(39)
+
+struct riscv_iommu_device {
+ struct iommu_device iommu; /* iommu core interface */
+ struct device *dev; /* iommu hardware */
+
+ /* hardware control register space */
+ void __iomem *reg;
+ resource_size_t reg_phys;
+
+ /* IRQs for the various queues */
+ int irq_cmdq;
+ int irq_fltq;
+ int irq_pm;
+ int irq_priq;
+
+ /* supported and enabled hardware capabilities */
+ u64 cap;
+
+ /* global lock, to be removed */
+ spinlock_t cq_lock;
+
+ /* device directory table root pointer and mode */
+ unsigned long ddtp;
+ unsigned ddt_mode;
+ bool ddtp_in_iomem;
+
+ /* Connected end-points */
+ struct rb_root eps;
+ struct mutex eps_mutex;
+};
+
+struct riscv_iommu_domain {
+ struct iommu_domain domain;
+
+ struct list_head endpoints;
+ struct mutex lock;
+ struct riscv_iommu_device *iommu;
+
+ unsigned mode; /* RIO_ATP_MODE_* enum */
+ unsigned pscid; /* RISC-V IOMMU PSCID */
+
+ pgd_t *pgd_root; /* page table root pointer */
+};
+
+/* Private dev_iommu_priv object, device-domain relationship. */
+struct riscv_iommu_endpoint {
+ struct device *dev; /* platform or PCI endpoint device */
+ unsigned devid; /* PCI bus:device:function number */
+ unsigned domid; /* PCI domain number, segment */
+ struct rb_node node; /* device tracking node (lookup by devid) */
+ struct riscv_iommu_device *iommu; /* parent iommu device */
+
+ struct mutex lock;
+ struct list_head domain; /* endpoint attached managed domain */
+};
+
+/* Helper functions and macros */
+
+static inline u32 riscv_iommu_readl(struct riscv_iommu_device *iommu,
+ unsigned offset)
+{
+ return readl_relaxed(iommu->reg + offset);
+}
+
+static inline void riscv_iommu_writel(struct riscv_iommu_device *iommu,
+ unsigned offset, u32 val)
+{
+ writel_relaxed(val, iommu->reg + offset);
+}
+
+static inline u64 riscv_iommu_readq(struct riscv_iommu_device *iommu,
+ unsigned offset)
+{
+ return readq_relaxed(iommu->reg + offset);
+}
+
+static inline void riscv_iommu_writeq(struct riscv_iommu_device *iommu,
+ unsigned offset, u64 val)
+{
+ writeq_relaxed(val, iommu->reg + offset);
+}
+
+int riscv_iommu_init(struct riscv_iommu_device *iommu);
+void riscv_iommu_remove(struct riscv_iommu_device *iommu);
+
+#endif
--
2.34.1
Hey Tomasz,
On Wed, Jul 19, 2023 at 12:33:45PM -0700, Tomasz Jeznach wrote:
> The patch introduces skeleton IOMMU device driver implementation as defined
> by RISC-V IOMMU Architecture Specification, Version 1.0 [1], with minimal support
> for pass-through mapping, basic initialization and bindings for platform and PCIe
> hardware implementations.
>
> Series of patches following specification evolution has been reorganized to provide
> functional separation of implemented blocks, compliant with ratified specification.
>
> This and following patch series includes code contributed by: Nick Kossifidis
> <[email protected]> (iommu-platform device, number of specification clarification
> and bugfixes and readability improvements), Sebastien Boeuf <[email protected]> (page
> table creation, ATS/PGR flow).
>
> Complete history can be found at the maintainer's repository branch [2].
>
> Device driver enables RISC-V 32/64 support for memory translation for DMA capable
> PCI and platform devices, multilevel device directory table, process directory,
> shared virtual address support, wired and message signaled interrupt for translation
> I/O fault, page request interface and command processing.
>
> Matching RISCV-V IOMMU device emulation implementation is available for QEMU project,
> along with educational device extensions for PASID ATS/PRI support [3].
This commit message reads like a cover letter IMO. At whatever point
you send a v2, could you re-write this focusing on what is done in the
patch itself?
Also, since I am not going to reply to any of these iommu driver patches
in a meaningful capacity, please run checkpatch.pl on your work. There
are well over 100 style etc complaints that it has highlighted. Sparse
has also gone a bit nuts, with many warnings along the lines of:
drivers/iommu/riscv/iommu.c:1568:29: warning: incorrect type in assignment (different base types)
drivers/iommu/riscv/iommu.c:1568:29: expected unsigned long long [usertype] iohgatp
drivers/iommu/riscv/iommu.c:1568:29: got restricted __le64 [usertype]
I can provide you the full list when the patchwork automation has run
through the series.
Anyway, what I wanted to ask was whether it was valid to use the IOMMU
in a system if Ziommu is not present in whatever the ISA extension
communication mechanism is? Eg, riscv,isa or the ISA string property in
the ACPI tables.
Thanks,
Conor.
> References:
> - [1] https://github.com/riscv-non-isa/riscv-iommu
> - [2] https://github.com/tjeznach/linux/tree/tjeznach/riscv-iommu
> - [3] https://github.com/tjeznach/qemu/tree/tjeznach/riscv-iommu
FYI, we have the Link: tag/trailer for this.
On Wed, Jul 19, 2023 at 1:50 PM Conor Dooley <[email protected]> wrote:
>
> Hey Tomasz,
>
> On Wed, Jul 19, 2023 at 12:33:45PM -0700, Tomasz Jeznach wrote:
> > The patch introduces skeleton IOMMU device driver implementation as defined
>
> This commit message reads like a cover letter IMO. At whatever point
> you send a v2, could you re-write this focusing on what is done in the
> patch itself?
>
ack. will amend the commit message.
> Also, since I am not going to reply to any of these iommu driver patches
> in a meaningful capacity, please run checkpatch.pl on your work. There
> are well over 100 style etc complaints that it has highlighted. Sparse
> has also gone a bit nuts, with many warnings along the lines of:
> drivers/iommu/riscv/iommu.c:1568:29: warning: incorrect type in assignment (different base types)
> drivers/iommu/riscv/iommu.c:1568:29: expected unsigned long long [usertype] iohgatp
> drivers/iommu/riscv/iommu.c:1568:29: got restricted __le64 [usertype]
>
> I can provide you the full list when the patchwork automation has run
> through the series.
>
Thank you, a list of used lint checkers definitely would help.
> Anyway, what I wanted to ask was whether it was valid to use the IOMMU
> in a system if Ziommu is not present in whatever the ISA extension
> communication mechanism is? Eg, riscv,isa or the ISA string property in
> the ACPI tables.
>
Yes, this has been pointed out to me already. As far as I can recall,
there was a discussion
at some point to introduce those as Ziommu extensions, later agreeing
not to call IOMMU
using ISA string conventions. Will remove remaining occurrences of
Ziommu from the series.
> Thanks,
> Conor.
>
> > References:
> > - [1] https://github.com/riscv-non-isa/riscv-iommu
> > - [2] https://github.com/tjeznach/linux/tree/tjeznach/riscv-iommu
> > - [3] https://github.com/tjeznach/qemu/tree/tjeznach/riscv-iommu
>
> FYI, we have the Link: tag/trailer for this.
>
Thanks,
- Tomasz
On 2023/7/20 3:33, Tomasz Jeznach wrote:
> +struct riscv_iommu_domain {
> + struct iommu_domain domain;
> +
> + struct list_head endpoints;
> + struct mutex lock;
> + struct riscv_iommu_device *iommu;
How are domains and iommu devices connected? A domain can be attached to
multiple devices, which are possibly behind different iommu devices. So
a domain is possibly connected to multiple iommu devices.
Is it possible?
> +
> + unsigned mode; /* RIO_ATP_MODE_* enum */
> + unsigned pscid; /* RISC-V IOMMU PSCID */
> +
> + pgd_t *pgd_root; /* page table root pointer */
> +};
> +
> +/* Private dev_iommu_priv object, device-domain relationship. */
> +struct riscv_iommu_endpoint {
> + struct device *dev; /* platform or PCI endpoint device */
> + unsigned devid; /* PCI bus:device:function number */
> + unsigned domid; /* PCI domain number, segment */
> + struct rb_node node; /* device tracking node (lookup by devid) */
> + struct riscv_iommu_device *iommu; /* parent iommu device */
> +
> + struct mutex lock;
> + struct list_head domain; /* endpoint attached managed domain */
> +};
Best regards,
baolu
On 2023/7/20 3:33, Tomasz Jeznach wrote:
> +static void riscv_iommu_iotlb_sync_map(struct iommu_domain *iommu_domain,
> + unsigned long iova, size_t size)
> +{
> + unsigned long end = iova + size - 1;
> + /*
> + * Given we don't know the page size used by this range, we assume the
> + * smallest page size to ensure all possible entries are flushed from
> + * the IOATC.
> + */
> + size_t pgsize = PAGE_SIZE;
> + riscv_iommu_flush_iotlb_range(iommu_domain, &iova, &end, &pgsize);
> +}
Does RISC-V IOMMU require to invalidate the TLB cache after new mappings
are created?
Best regards,
baolu
On Thu, Jul 20, 2023 at 5:31 AM Baolu Lu <[email protected]> wrote:
>
> On 2023/7/20 3:33, Tomasz Jeznach wrote:
> > +static void riscv_iommu_iotlb_sync_map(struct iommu_domain *iommu_domain,
> > + unsigned long iova, size_t size)
> > +{
> > + unsigned long end = iova + size - 1;
> > + /*
> > + * Given we don't know the page size used by this range, we assume the
> > + * smallest page size to ensure all possible entries are flushed from
> > + * the IOATC.
> > + */
> > + size_t pgsize = PAGE_SIZE;
> > + riscv_iommu_flush_iotlb_range(iommu_domain, &iova, &end, &pgsize);
> > +}
>
> Does RISC-V IOMMU require to invalidate the TLB cache after new mappings
> are created?
>
No. Only on unmapping / permission change.
Thanks for pointing this out.
> Best regards,
> baolu
regards,
- Tomasz
On Wed, Jul 19, 2023 at 02:43:51PM -0700, Tomasz Jeznach wrote:
> On Wed, Jul 19, 2023 at 1:50 PM Conor Dooley <[email protected]> wrote:
> > Anyway, what I wanted to ask was whether it was valid to use the IOMMU
> > in a system if Ziommu is not present in whatever the ISA extension
> > communication mechanism is? Eg, riscv,isa or the ISA string property in
> > the ACPI tables.
> >
>
> Yes, this has been pointed out to me already. As far as I can recall,
> there was a discussion
> at some point to introduce those as Ziommu extensions, later agreeing
> not to call IOMMU
> using ISA string conventions. Will remove remaining occurrences of
> Ziommu from the series.
Right, thanks for clearing that up. I got a bit confused :)
On Wed, Jul 19, 2023 at 02:43:51PM -0700, Tomasz Jeznach wrote:
> On Wed, Jul 19, 2023 at 1:50 PM Conor Dooley <[email protected]> wrote:
> > Also, since I am not going to reply to any of these iommu driver patches
> > in a meaningful capacity, please run checkpatch.pl on your work. There
> > are well over 100 style etc complaints that it has highlighted. Sparse
> > has also gone a bit nuts, with many warnings along the lines of:
> > drivers/iommu/riscv/iommu.c:1568:29: warning: incorrect type in assignment (different base types)
> > drivers/iommu/riscv/iommu.c:1568:29: expected unsigned long long [usertype] iohgatp
> > drivers/iommu/riscv/iommu.c:1568:29: got restricted __le64 [usertype]
> >
> > I can provide you the full list when the patchwork automation has run
> > through the series.
> >
>
> Thank you, a list of used lint checkers definitely would help.
checkpatch is mentioned in the patch submission documentation ;)
Anyway, here's the series on patchwork:
https://patchwork.kernel.org/project/linux-riscv/list/?series=767543
You can see there's quite a few failure for each patch, so you'll need
to resolve those.
Also, I noticed the 32-bit build is broken in some patches, so please
build this driver for 32-bit before sending a v2.
Thanks,
Conor.
On Thu, Jul 20, 2023 at 3:34 AM Tomasz Jeznach <[email protected]> wrote:
>
> The patch introduces skeleton IOMMU device driver implementation as defined
> by RISC-V IOMMU Architecture Specification, Version 1.0 [1], with minimal support
> for pass-through mapping, basic initialization and bindings for platform and PCIe
> hardware implementations.
>
> Series of patches following specification evolution has been reorganized to provide
> functional separation of implemented blocks, compliant with ratified specification.
>
> This and following patch series includes code contributed by: Nick Kossifidis
> <[email protected]> (iommu-platform device, number of specification clarification
> and bugfixes and readability improvements), Sebastien Boeuf <[email protected]> (page
> table creation, ATS/PGR flow).
>
> Complete history can be found at the maintainer's repository branch [2].
>
> Device driver enables RISC-V 32/64 support for memory translation for DMA capable
> PCI and platform devices, multilevel device directory table, process directory,
> shared virtual address support, wired and message signaled interrupt for translation
> I/O fault, page request interface and command processing.
>
> Matching RISCV-V IOMMU device emulation implementation is available for QEMU project,
> along with educational device extensions for PASID ATS/PRI support [3].
>
> References:
> - [1] https://github.com/riscv-non-isa/riscv-iommu
> - [2] https://github.com/tjeznach/linux/tree/tjeznach/riscv-iommu
> - [3] https://github.com/tjeznach/qemu/tree/tjeznach/riscv-iommu
>
> Co-developed-by: Nick Kossifidis <[email protected]>
> Signed-off-by: Nick Kossifidis <[email protected]>
> Co-developed-by: Sebastien Boeuf <[email protected]>
> Signed-off-by: Sebastien Boeuf <[email protected]>
> Signed-off-by: Tomasz Jeznach <[email protected]>
> ---
> drivers/iommu/Kconfig | 1 +
> drivers/iommu/Makefile | 2 +-
> drivers/iommu/riscv/Kconfig | 22 +
> drivers/iommu/riscv/Makefile | 1 +
> drivers/iommu/riscv/iommu-bits.h | 704 +++++++++++++++++++++++++++
> drivers/iommu/riscv/iommu-pci.c | 134 +++++
> drivers/iommu/riscv/iommu-platform.c | 94 ++++
> drivers/iommu/riscv/iommu.c | 660 +++++++++++++++++++++++++
> drivers/iommu/riscv/iommu.h | 115 +++++
> 9 files changed, 1732 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iommu/riscv/Kconfig
> create mode 100644 drivers/iommu/riscv/Makefile
> create mode 100644 drivers/iommu/riscv/iommu-bits.h
> create mode 100644 drivers/iommu/riscv/iommu-pci.c
> create mode 100644 drivers/iommu/riscv/iommu-platform.c
> create mode 100644 drivers/iommu/riscv/iommu.c
> create mode 100644 drivers/iommu/riscv/iommu.h
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 2b12b583ef4b..36fcc6fd5b4e 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -187,6 +187,7 @@ config MSM_IOMMU
> source "drivers/iommu/amd/Kconfig"
> source "drivers/iommu/intel/Kconfig"
> source "drivers/iommu/iommufd/Kconfig"
> +source "drivers/iommu/riscv/Kconfig"
>
> config IRQ_REMAP
> bool "Support for Interrupt Remapping"
> diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
> index 769e43d780ce..8f57110a9fb1 100644
> --- a/drivers/iommu/Makefile
> +++ b/drivers/iommu/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> -obj-y += amd/ intel/ arm/ iommufd/
> +obj-y += amd/ intel/ arm/ iommufd/ riscv/
> obj-$(CONFIG_IOMMU_API) += iommu.o
> obj-$(CONFIG_IOMMU_API) += iommu-traces.o
> obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
> diff --git a/drivers/iommu/riscv/Kconfig b/drivers/iommu/riscv/Kconfig
> new file mode 100644
> index 000000000000..01d4043849d4
> --- /dev/null
> +++ b/drivers/iommu/riscv/Kconfig
> @@ -0,0 +1,22 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# RISC-V IOMMU support
> +
> +config RISCV_IOMMU
> + bool "RISC-V IOMMU driver"
> + depends on RISCV
> + select IOMMU_API
> + select IOMMU_DMA
> + select IOMMU_SVA
> + select IOMMU_IOVA
> + select IOMMU_IO_PGTABLE
> + select IOASID
> + select PCI_MSI
> + select PCI_ATS
> + select PCI_PRI
> + select PCI_PASID
> + select MMU_NOTIFIER
> + help
> + Support for devices following RISC-V IOMMU specification.
> +
> + If unsure, say N here.
> +
> diff --git a/drivers/iommu/riscv/Makefile b/drivers/iommu/riscv/Makefile
> new file mode 100644
> index 000000000000..38730c11e4a8
> --- /dev/null
> +++ b/drivers/iommu/riscv/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_RISCV_IOMMU) += iommu.o iommu-pci.o iommu-platform.o
> \ No newline at end of file
> diff --git a/drivers/iommu/riscv/iommu-bits.h b/drivers/iommu/riscv/iommu-bits.h
> new file mode 100644
> index 000000000000..b2946793a73d
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-bits.h
> @@ -0,0 +1,704 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + * Copyright © 2023 RISC-V IOMMU Task Group
> + *
> + * RISC-V Ziommu - Register Layout and Data Structures.
> + *
> + * Based on the 'RISC-V IOMMU Architecture Specification', Version 1.0
> + * Published at https://github.com/riscv-non-isa/riscv-iommu
> + *
> + */
> +
> +#ifndef _RISCV_IOMMU_BITS_H_
> +#define _RISCV_IOMMU_BITS_H_
> +
> +#include <linux/types.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +
> +/*
> + * Chapter 5: Memory Mapped register interface
> + */
> +
> +/* Common field positions */
> +#define RISCV_IOMMU_PPN_FIELD GENMASK_ULL(53, 10)
> +#define RISCV_IOMMU_QUEUE_LOGSZ_FIELD GENMASK_ULL(4, 0)
> +#define RISCV_IOMMU_QUEUE_INDEX_FIELD GENMASK_ULL(31, 0)
> +#define RISCV_IOMMU_QUEUE_ENABLE BIT(0)
> +#define RISCV_IOMMU_QUEUE_INTR_ENABLE BIT(1)
> +#define RISCV_IOMMU_QUEUE_MEM_FAULT BIT(8)
> +#define RISCV_IOMMU_QUEUE_OVERFLOW BIT(9)
> +#define RISCV_IOMMU_QUEUE_ACTIVE BIT(16)
> +#define RISCV_IOMMU_QUEUE_BUSY BIT(17)
> +
> +#define RISCV_IOMMU_ATP_PPN_FIELD GENMASK_ULL(43, 0)
> +#define RISCV_IOMMU_ATP_MODE_FIELD GENMASK_ULL(63, 60)
> +
> +/* 5.3 IOMMU Capabilities (64bits) */
> +#define RISCV_IOMMU_REG_CAP 0x0000
> +#define RISCV_IOMMU_CAP_VERSION GENMASK_ULL(7, 0)
> +#define RISCV_IOMMU_CAP_S_SV32 BIT_ULL(8)
> +#define RISCV_IOMMU_CAP_S_SV39 BIT_ULL(9)
> +#define RISCV_IOMMU_CAP_S_SV48 BIT_ULL(10)
> +#define RISCV_IOMMU_CAP_S_SV57 BIT_ULL(11)
> +#define RISCV_IOMMU_CAP_SVPBMT BIT_ULL(15)
> +#define RISCV_IOMMU_CAP_G_SV32 BIT_ULL(16)
> +#define RISCV_IOMMU_CAP_G_SV39 BIT_ULL(17)
> +#define RISCV_IOMMU_CAP_G_SV48 BIT_ULL(18)
> +#define RISCV_IOMMU_CAP_G_SV57 BIT_ULL(19)
> +#define RISCV_IOMMU_CAP_MSI_FLAT BIT_ULL(22)
> +#define RISCV_IOMMU_CAP_MSI_MRIF BIT_ULL(23)
> +#define RISCV_IOMMU_CAP_AMO BIT_ULL(24)
> +#define RISCV_IOMMU_CAP_ATS BIT_ULL(25)
> +#define RISCV_IOMMU_CAP_T2GPA BIT_ULL(26)
> +#define RISCV_IOMMU_CAP_END BIT_ULL(27)
> +#define RISCV_IOMMU_CAP_IGS GENMASK_ULL(29, 28)
> +#define RISCV_IOMMU_CAP_HPM BIT_ULL(30)
> +#define RISCV_IOMMU_CAP_DBG BIT_ULL(31)
> +#define RISCV_IOMMU_CAP_PAS GENMASK_ULL(37, 32)
> +#define RISCV_IOMMU_CAP_PD8 BIT_ULL(38)
> +#define RISCV_IOMMU_CAP_PD17 BIT_ULL(39)
> +#define RISCV_IOMMU_CAP_PD20 BIT_ULL(40)
> +
> +#define RISCV_IOMMU_CAP_VERSION_VER_MASK 0xF0
> +#define RISCV_IOMMU_CAP_VERSION_REV_MASK 0x0F
> +
> +/**
> + * enum riscv_iommu_igs_settings - Interrupt Generation Support Settings
> + * @RISCV_IOMMU_CAP_IGS_MSI: I/O MMU supports only MSI generation
> + * @RISCV_IOMMU_CAP_IGS_WSI: I/O MMU supports only Wired-Signaled interrupt
> + * @RISCV_IOMMU_CAP_IGS_BOTH: I/O MMU supports both MSI and WSI generation
> + * @RISCV_IOMMU_CAP_IGS_RSRV: Reserved for standard use
> + */
> +enum riscv_iommu_igs_settings {
> + RISCV_IOMMU_CAP_IGS_MSI = 0,
> + RISCV_IOMMU_CAP_IGS_WSI = 1,
> + RISCV_IOMMU_CAP_IGS_BOTH = 2,
> + RISCV_IOMMU_CAP_IGS_RSRV = 3
> +};
> +
> +/* 5.4 Features control register (32bits) */
> +#define RISCV_IOMMU_REG_FCTL 0x0008
> +#define RISCV_IOMMU_FCTL_BE BIT(0)
> +#define RISCV_IOMMU_FCTL_WSI BIT(1)
> +#define RISCV_IOMMU_FCTL_GXL BIT(2)
> +
> +/* 5.5 Device-directory-table pointer (64bits) */
> +#define RISCV_IOMMU_REG_DDTP 0x0010
> +#define RISCV_IOMMU_DDTP_MODE GENMASK_ULL(3, 0)
> +#define RISCV_IOMMU_DDTP_BUSY BIT_ULL(4)
> +#define RISCV_IOMMU_DDTP_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/**
> + * enum riscv_iommu_ddtp_modes - I/O MMU translation modes
> + * @RISCV_IOMMU_DDTP_MODE_OFF: No inbound transactions allowed
> + * @RISCV_IOMMU_DDTP_MODE_BARE: Pass-through mode
> + * @RISCV_IOMMU_DDTP_MODE_1LVL: One-level DDT
> + * @RISCV_IOMMU_DDTP_MODE_2LVL: Two-level DDT
> + * @RISCV_IOMMU_DDTP_MODE_3LVL: Three-level DDT
> + */
> +enum riscv_iommu_ddtp_modes {
> + RISCV_IOMMU_DDTP_MODE_OFF = 0,
> + RISCV_IOMMU_DDTP_MODE_BARE = 1,
> + RISCV_IOMMU_DDTP_MODE_1LVL = 2,
> + RISCV_IOMMU_DDTP_MODE_2LVL = 3,
> + RISCV_IOMMU_DDTP_MODE_3LVL = 4,
> + RISCV_IOMMU_DDTP_MODE_MAX = 4
> +};
> +
> +/* 5.6 Command Queue Base (64bits) */
> +#define RISCV_IOMMU_REG_CQB 0x0018
> +#define RISCV_IOMMU_CQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
> +#define RISCV_IOMMU_CQB_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.7 Command Queue head (32bits) */
> +#define RISCV_IOMMU_REG_CQH 0x0020
> +#define RISCV_IOMMU_CQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.8 Command Queue tail (32bits) */
> +#define RISCV_IOMMU_REG_CQT 0x0024
> +#define RISCV_IOMMU_CQT_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.9 Fault Queue Base (64bits) */
> +#define RISCV_IOMMU_REG_FQB 0x0028
> +#define RISCV_IOMMU_FQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
> +#define RISCV_IOMMU_FQB_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.10 Fault Queue Head (32bits) */
> +#define RISCV_IOMMU_REG_FQH 0x0030
> +#define RISCV_IOMMU_FQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.11 Fault Queue tail (32bits) */
> +#define RISCV_IOMMU_REG_FQT 0x0034
> +#define RISCV_IOMMU_FQT_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.12 Page Request Queue base (64bits) */
> +#define RISCV_IOMMU_REG_PQB 0x0038
> +#define RISCV_IOMMU_PQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
> +#define RISCV_IOMMU_PQB_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.13 Page Request Queue head (32bits) */
> +#define RISCV_IOMMU_REG_PQH 0x0040
> +#define RISCV_IOMMU_PQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.14 Page Request Queue tail (32bits) */
> +#define RISCV_IOMMU_REG_PQT 0x0044
> +#define RISCV_IOMMU_PQT_INDEX_MASK RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.15 Command Queue CSR (32bits) */
> +#define RISCV_IOMMU_REG_CQCSR 0x0048
> +#define RISCV_IOMMU_CQCSR_CQEN RISCV_IOMMU_QUEUE_ENABLE
> +#define RISCV_IOMMU_CQCSR_CIE RISCV_IOMMU_QUEUE_INTR_ENABLE
> +#define RISCV_IOMMU_CQCSR_CQMF RISCV_IOMMU_QUEUE_MEM_FAULT
> +#define RISCV_IOMMU_CQCSR_CMD_TO BIT(9)
> +#define RISCV_IOMMU_CQCSR_CMD_ILL BIT(10)
> +#define RISCV_IOMMU_CQCSR_FENCE_W_IP BIT(11)
> +#define RISCV_IOMMU_CQCSR_CQON RISCV_IOMMU_QUEUE_ACTIVE
> +#define RISCV_IOMMU_CQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
> +
> +/* 5.16 Fault Queue CSR (32bits) */
> +#define RISCV_IOMMU_REG_FQCSR 0x004C
> +#define RISCV_IOMMU_FQCSR_FQEN RISCV_IOMMU_QUEUE_ENABLE
> +#define RISCV_IOMMU_FQCSR_FIE RISCV_IOMMU_QUEUE_INTR_ENABLE
> +#define RISCV_IOMMU_FQCSR_FQMF RISCV_IOMMU_QUEUE_MEM_FAULT
> +#define RISCV_IOMMU_FQCSR_FQOF RISCV_IOMMU_QUEUE_OVERFLOW
> +#define RISCV_IOMMU_FQCSR_FQON RISCV_IOMMU_QUEUE_ACTIVE
> +#define RISCV_IOMMU_FQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
> +
> +/* 5.17 Page Request Queue CSR (32bits) */
> +#define RISCV_IOMMU_REG_PQCSR 0x0050
> +#define RISCV_IOMMU_PQCSR_PQEN RISCV_IOMMU_QUEUE_ENABLE
> +#define RISCV_IOMMU_PQCSR_PIE RISCV_IOMMU_QUEUE_INTR_ENABLE
> +#define RISCV_IOMMU_PQCSR_PQMF RISCV_IOMMU_QUEUE_MEM_FAULT
> +#define RISCV_IOMMU_PQCSR_PQOF RISCV_IOMMU_QUEUE_OVERFLOW
> +#define RISCV_IOMMU_PQCSR_PQON RISCV_IOMMU_QUEUE_ACTIVE
> +#define RISCV_IOMMU_PQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
> +
> +/* 5.18 Interrupt Pending Status (32bits) */
> +#define RISCV_IOMMU_REG_IPSR 0x0054
> +
> +#define RISCV_IOMMU_INTR_CQ 0
> +#define RISCV_IOMMU_INTR_FQ 1
> +#define RISCV_IOMMU_INTR_PM 2
> +#define RISCV_IOMMU_INTR_PQ 3
> +#define RISCV_IOMMU_INTR_COUNT 4
> +
> +#define RISCV_IOMMU_IPSR_CIP BIT(RISCV_IOMMU_INTR_CQ)
> +#define RISCV_IOMMU_IPSR_FIP BIT(RISCV_IOMMU_INTR_FQ)
> +#define RISCV_IOMMU_IPSR_PMIP BIT(RISCV_IOMMU_INTR_PM)
> +#define RISCV_IOMMU_IPSR_PIP BIT(RISCV_IOMMU_INTR_PQ)
> +
> +/* 5.19 Performance monitoring counter overflow status (32bits) */
> +#define RISCV_IOMMU_REG_IOCOUNTOVF 0x0058
> +#define RISCV_IOMMU_IOCOUNTOVF_CY BIT(0)
> +#define RISCV_IOMMU_IOCOUNTOVF_HPM GENMASK_ULL(31, 1)
> +
> +/* 5.20 Performance monitoring counter inhibits (32bits) */
> +#define RISCV_IOMMU_REG_IOCOUNTINH 0x005C
> +#define RISCV_IOMMU_IOCOUNTINH_CY BIT(0)
> +#define RISCV_IOMMU_IOCOUNTINH_HPM GENMASK(31, 1)
> +
> +/* 5.21 Performance monitoring cycles counter (64bits) */
> +#define RISCV_IOMMU_REG_IOHPMCYCLES 0x0060
> +#define RISCV_IOMMU_IOHPMCYCLES_COUNTER GENMASK_ULL(62, 0)
> +#define RISCV_IOMMU_IOHPMCYCLES_OVF BIT_ULL(63)
> +
> +/* 5.22 Performance monitoring event counters (31 * 64bits) */
> +#define RISCV_IOMMU_REG_IOHPMCTR_BASE 0x0068
> +#define RISCV_IOMMU_REG_IOHPMCTR(_n) (RISCV_IOMMU_REG_IOHPMCTR_BASE + (_n * 0x8))
> +
> +/* 5.23 Performance monitoring event selectors (31 * 64bits) */
> +#define RISCV_IOMMU_REG_IOHPMEVT_BASE 0x0160
> +#define RISCV_IOMMU_REG_IOHPMEVT(_n) (RISCV_IOMMU_REG_IOHPMEVT_BASE + (_n * 0x8))
> +#define RISCV_IOMMU_IOHPMEVT_EVENT_ID GENMASK_ULL(14, 0)
> +#define RISCV_IOMMU_IOHPMEVT_DMASK BIT_ULL(15)
> +#define RISCV_IOMMU_IOHPMEVT_PID_PSCID GENMASK_ULL(35, 16)
> +#define RISCV_IOMMU_IOHPMEVT_DID_GSCID GENMASK_ULL(59, 36)
> +#define RISCV_IOMMU_IOHPMEVT_PV_PSCV BIT_ULL(60)
> +#define RISCV_IOMMU_IOHPMEVT_DV_GSCV BIT_ULL(61)
> +#define RISCV_IOMMU_IOHPMEVT_IDT BIT_ULL(62)
> +#define RISCV_IOMMU_IOHPMEVT_OF BIT_ULL(63)
> +
> +/**
> + * enum riscv_iommu_hpmevent_id - Performance-monitoring event identifier
> + *
> + * @RISCV_IOMMU_HPMEVENT_INVALID: Invalid event, do not count
> + * @RISCV_IOMMU_HPMEVENT_URQ: Untranslated requests
> + * @RISCV_IOMMU_HPMEVENT_TRQ: Translated requests
> + * @RISCV_IOMMU_HPMEVENT_ATS_RQ: ATS translation requests
> + * @RISCV_IOMMU_HPMEVENT_TLB_MISS: TLB misses
> + * @RISCV_IOMMU_HPMEVENT_DD_WALK: Device directory walks
> + * @RISCV_IOMMU_HPMEVENT_PD_WALK: Process directory walks
> + * @RISCV_IOMMU_HPMEVENT_S_VS_WALKS: S/VS-Stage page table walks
> + * @RISCV_IOMMU_HPMEVENT_G_WALKS: G-Stage page table walks
> + * @RISCV_IOMMU_HPMEVENT_MAX: Value to denote maximum Event IDs
> + */
> +enum riscv_iommu_hpmevent_id {
> + RISCV_IOMMU_HPMEVENT_INVALID = 0,
> + RISCV_IOMMU_HPMEVENT_URQ = 1,
> + RISCV_IOMMU_HPMEVENT_TRQ = 2,
> + RISCV_IOMMU_HPMEVENT_ATS_RQ = 3,
> + RISCV_IOMMU_HPMEVENT_TLB_MISS = 4,
> + RISCV_IOMMU_HPMEVENT_DD_WALK = 5,
> + RISCV_IOMMU_HPMEVENT_PD_WALK = 6,
> + RISCV_IOMMU_HPMEVENT_S_VS_WALKS = 7,
> + RISCV_IOMMU_HPMEVENT_G_WALKS = 8,
> + RISCV_IOMMU_HPMEVENT_MAX = 9
> +};
> +
> +/* 5.24 Translation request IOVA (64bits) */
> +#define RISCV_IOMMU_REG_TR_REQ_IOVA 0x0258
> +#define RISCV_IOMMU_TR_REQ_IOVA_VPN GENMASK_ULL(63, 12)
> +
> +/* 5.25 Translation request control (64bits) */
> +#define RISCV_IOMMU_REG_TR_REQ_CTL 0x0260
> +#define RISCV_IOMMU_TR_REQ_CTL_GO_BUSY BIT_ULL(0)
> +#define RISCV_IOMMU_TR_REQ_CTL_PRIV BIT_ULL(1)
> +#define RISCV_IOMMU_TR_REQ_CTL_EXE BIT_ULL(2)
> +#define RISCV_IOMMU_TR_REQ_CTL_NW BIT_ULL(3)
> +#define RISCV_IOMMU_TR_REQ_CTL_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_TR_REQ_CTL_PV BIT_ULL(32)
> +#define RISCV_IOMMU_TR_REQ_CTL_DID GENMASK_ULL(63, 40)
> +
> +/* 5.26 Translation request response (64bits) */
> +#define RISCV_IOMMU_REG_TR_RESPONSE 0x0268
> +#define RISCV_IOMMU_TR_RESPONSE_FAULT BIT_ULL(0)
> +#define RISCV_IOMMU_TR_RESPONSE_PBMT GENMASK_ULL(8, 7)
> +#define RISCV_IOMMU_TR_RESPONSE_SZ BIT_ULL(9)
> +#define RISCV_IOMMU_TR_RESPONSE_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.27 Interrupt cause to vector (64bits) */
> +#define RISCV_IOMMU_REG_IVEC 0x02F8
> +#define RISCV_IOMMU_IVEC_CIV GENMASK_ULL(3, 0)
> +#define RISCV_IOMMU_IVEC_FIV GENMASK_ULL(7, 4)
> +#define RISCV_IOMMU_IVEC_PMIV GENMASK_ULL(11, 8)
> +#define RISCV_IOMMU_IVEC_PIV GENMASK_ULL(15,12)
> +
> +/* 5.28 MSI Configuration table (32 * 64bits) */
> +#define RISCV_IOMMU_REG_MSI_CONFIG 0x0300
> +#define RISCV_IOMMU_REG_MSI_ADDR(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10))
> +#define RISCV_IOMMU_MSI_ADDR GENMASK_ULL(55, 2)
> +#define RISCV_IOMMU_REG_MSI_DATA(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10) + 0x08)
> +#define RISCV_IOMMU_MSI_DATA GENMASK_ULL(31, 0)
> +#define RISCV_IOMMU_REG_MSI_VEC_CTL(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10) + 0x0C)
> +#define RISCV_IOMMU_MSI_VEC_CTL_M BIT_ULL(0)
> +
> +#define RISCV_IOMMU_REG_SIZE 0x1000
> +
> +/*
> + * Chapter 2: Data structures
> + */
> +
> +/*
> + * Device Directory Table macros for non-leaf nodes
> + */
> +#define RISCV_IOMMU_DDTE_VALID BIT_ULL(0)
> +#define RISCV_IOMMU_DDTE_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/**
> + * struct riscv_iommu_dc - Device Context
> + * @tc: Translation Control
> + * @iohgatp: I/O Hypervisor guest address translation and protection
> + * (Second stage context)
> + * @ta: Translation Attributes
> + * @fsc: First stage context
> + * @msiptpt: MSI page table pointer
> + * @msi_addr_mask: MSI address mask
> + * @msi_addr_pattern: MSI address pattern
> + *
> + * This structure is used for leaf nodes on the Device Directory Table,
> + * in case RISCV_IOMMU_CAP_MSI_FLAT is not set, the bottom 4 fields are
> + * not present and are skipped with pointer arithmetic to avoid
> + * casting, check out riscv_iommu_get_dc().
> + * See section 2.1 for more details
> + */
> +struct riscv_iommu_dc {
> + u64 tc;
> + u64 iohgatp;
> + u64 ta;
> + u64 fsc;
> + u64 msiptp;
> + u64 msi_addr_mask;
> + u64 msi_addr_pattern;
> + u64 _reserved;
> +};
> +
> +/* Translation control fields */
> +#define RISCV_IOMMU_DC_TC_V BIT_ULL(0)
> +#define RISCV_IOMMU_DC_TC_EN_ATS BIT_ULL(1)
> +#define RISCV_IOMMU_DC_TC_EN_PRI BIT_ULL(2)
> +#define RISCV_IOMMU_DC_TC_T2GPA BIT_ULL(3)
> +#define RISCV_IOMMU_DC_TC_DTF BIT_ULL(4)
> +#define RISCV_IOMMU_DC_TC_PDTV BIT_ULL(5)
> +#define RISCV_IOMMU_DC_TC_PRPR BIT_ULL(6)
> +#define RISCV_IOMMU_DC_TC_GADE BIT_ULL(7)
> +#define RISCV_IOMMU_DC_TC_SADE BIT_ULL(8)
> +#define RISCV_IOMMU_DC_TC_DPE BIT_ULL(9)
> +#define RISCV_IOMMU_DC_TC_SBE BIT_ULL(10)
> +#define RISCV_IOMMU_DC_TC_SXL BIT_ULL(11)
> +
> +/* Second-stage (aka G-stage) context fields */
> +#define RISCV_IOMMU_DC_IOHGATP_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_DC_IOHGATP_GSCID GENMASK_ULL(59, 44)
> +#define RISCV_IOMMU_DC_IOHGATP_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +
> +/**
> + * enum riscv_iommu_dc_iohgatp_modes - Guest address translation/protection modes
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_BARE: No translation/protection
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV32X4: Sv32x4 (2-bit extension of Sv32), when fctl.GXL == 1
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV39X4: Sv39x4 (2-bit extension of Sv39), when fctl.GXL == 0
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV48X4: Sv48x4 (2-bit extension of Sv48), when fctl.GXL == 0
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV57X4: Sv57x4 (2-bit extension of Sv57), when fctl.GXL == 0
> + */
> +enum riscv_iommu_dc_iohgatp_modes {
> + RISCV_IOMMU_DC_IOHGATP_MODE_BARE = 0,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV32X4 = 8,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV39X4 = 8,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV48X4 = 9,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV57X4 = 10
> +};
> +
> +/* Translation attributes fields */
> +#define RISCV_IOMMU_DC_TA_PSCID GENMASK_ULL(31,12)
> +
> +/* First-stage context fields */
> +#define RISCV_IOMMU_DC_FSC_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_DC_FSC_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +
> +/**
> + * enum riscv_iommu_dc_fsc_atp_modes - First stage address translation/protection modes
> + * @RISCV_IOMMU_DC_FSC_MODE_BARE: No translation/protection
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32: Sv32, when dc.tc.SXL == 1
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV39: Sv39, when dc.tc.SXL == 0
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV48: Sv48, when dc.tc.SXL == 0
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV57: Sv57, when dc.tc.SXL == 0
> + * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8: 1lvl PDT, 8bit process ids
> + * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD17: 2lvl PDT, 17bit process ids
> + * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD20: 3lvl PDT, 20bit process ids
> + *
> + * FSC holds IOSATP when RISCV_IOMMU_DC_TC_PDTV is 0 and PDTP otherwise.
> + * IOSATP controls the first stage address translation (same as the satp register on
> + * the RISC-V MMU), and PDTP holds the process directory table, used to select a
> + * first stage page table based on a process id (for devices that support multiple
> + * process ids).
> + */
> +enum riscv_iommu_dc_fsc_atp_modes {
> + RISCV_IOMMU_DC_FSC_MODE_BARE = 0,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 = 8,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV39 = 8,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV48 = 9,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV57 = 10,
> + RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8 = 1,
> + RISCV_IOMMU_DC_FSC_PDTP_MODE_PD17 = 2,
> + RISCV_IOMMU_DC_FSC_PDTP_MODE_PD20 = 3
> +};
> +
> +/* MSI page table pointer */
> +#define RISCV_IOMMU_DC_MSIPTP_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_DC_MSIPTP_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +#define RISCV_IOMMU_DC_MSIPTP_MODE_OFF 0
> +#define RISCV_IOMMU_DC_MSIPTP_MODE_FLAT 1
> +
> +/* MSI address mask */
> +#define RISCV_IOMMU_DC_MSI_ADDR_MASK GENMASK_ULL(51, 0)
> +
> +/* MSI address pattern */
> +#define RISCV_IOMMU_DC_MSI_PATTERN GENMASK_ULL(51, 0)
> +
> +/**
> + * struct riscv_iommu_pc - Process Context
> + * @ta: Translation Attributes
> + * @fsc: First stage context
> + *
> + * This structure is used for leaf nodes on the Process Directory Table
> + * See section 2.3 for more details
> + */
> +struct riscv_iommu_pc {
> + u64 ta;
> + u64 fsc;
> +};
> +
> +/* Translation attributes fields */
> +#define RISCV_IOMMU_PC_TA_V BIT_ULL(0)
> +#define RISCV_IOMMU_PC_TA_ENS BIT_ULL(1)
> +#define RISCV_IOMMU_PC_TA_SUM BIT_ULL(2)
> +#define RISCV_IOMMU_PC_TA_PSCID GENMASK_ULL(31, 12)
> +
> +/* First stage context fields */
> +#define RISCV_IOMMU_PC_FSC_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_PC_FSC_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +
> +/*
> + * Chapter 3: In-memory queue interface
> + */
> +
> +/**
> + * struct riscv_iommu_cmd - Generic I/O MMU command structure
> + * @dword0: Includes the opcode and the function identifier
> + * @dword1: Opcode specific data
> + *
> + * The commands are interpreted as two 64bit fields, where the first
> + * 7bits of the first field are the opcode which also defines the
> + * command's format, followed by a 3bit field that specifies the
> + * function invoked by that command, and the rest is opcode-specific.
> + * This is a generic struct which will be populated differently
> + * according to each command. For more infos on the commands and
> + * the command queue check section 3.1.
> + */
> +struct riscv_iommu_command {
> + u64 dword0;
> + u64 dword1;
> +};
> +
> +/* Fields on dword0, common for all commands */
> +#define RISCV_IOMMU_CMD_OPCODE GENMASK_ULL(6, 0)
> +#define RISCV_IOMMU_CMD_FUNC GENMASK_ULL(9, 7)
> +
> +/* 3.1.1 I/O MMU Page-table cache invalidation */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_IOTINVAL_OPCODE 1
> +#define RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA 0
> +#define RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA 1
> +#define RISCV_IOMMU_CMD_IOTINVAL_AV BIT_ULL(10)
> +#define RISCV_IOMMU_CMD_IOTINVAL_PSCID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_CMD_IOTINVAL_PSCV BIT_ULL(32)
> +#define RISCV_IOMMU_CMD_IOTINVAL_GV BIT_ULL(33)
> +#define RISCV_IOMMU_CMD_IOTINVAL_GSCID GENMASK_ULL(59, 44)
> +/* dword1 is the address, 4K-alligned and shifted to the right by
> + * two bits. */
> +
> +/* 3.1.2 I/O MMU Command Queue Fences */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_IOFENCE_OPCODE 2
> +#define RISCV_IOMMU_CMD_IOFENCE_FUNC_C 0
> +#define RISCV_IOMMU_CMD_IOFENCE_AV BIT_ULL(10)
> +#define RISCV_IOMMU_CMD_IOFENCE_WSI BIT_ULL(11)
> +#define RISCV_IOMMU_CMD_IOFENCE_PR BIT_ULL(12)
> +#define RISCV_IOMMU_CMD_IOFENCE_PW BIT_ULL(13)
> +#define RISCV_IOMMU_CMD_IOFENCE_DATA GENMASK_ULL(63, 32)
> +/* dword1 is the address, word-size alligned and shifted to the
> + * right by two bits. */
> +
> +/* 3.1.3 I/O MMU Directory cache invalidation */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_IODIR_OPCODE 3
> +#define RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_DDT 0
> +#define RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_PDT 1
> +#define RISCV_IOMMU_CMD_IODIR_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_CMD_IODIR_DV BIT_ULL(33)
> +#define RISCV_IOMMU_CMD_IODIR_DID GENMASK_ULL(63, 40)
> +/* dword1 is reserved for standard use */
> +
> +/* 3.1.4 I/O MMU PCIe ATS */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_ATS_OPCODE 4
> +#define RISCV_IOMMU_CMD_ATS_FUNC_INVAL 0
> +#define RISCV_IOMMU_CMD_ATS_FUNC_PRGR 1
> +#define RISCV_IOMMU_CMD_ATS_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_CMD_ATS_PV BIT_ULL(32)
> +#define RISCV_IOMMU_CMD_ATS_DSV BIT_ULL(33)
> +#define RISCV_IOMMU_CMD_ATS_RID GENMASK_ULL(55, 40)
> +#define RISCV_IOMMU_CMD_ATS_DSEG GENMASK_ULL(63, 56)
> +/* dword1 is the ATS payload, two different payload types for INVAL and PRGR */
> +
> +/* ATS.INVAL payload*/
> +#define RISCV_IOMMU_CMD_ATS_INVAL_G BIT_ULL(0)
> +/* Bits 1 - 10 are zeroed */
> +#define RISCV_IOMMU_CMD_ATS_INVAL_S BIT_ULL(11)
> +#define RISCV_IOMMU_CMD_ATS_INVAL_UADDR GENMASK_ULL(63, 12)
> +
> +/* ATS.PRGR payload */
> +/* Bits 0 - 31 are zeroed */
> +#define RISCV_IOMMU_CMD_ATS_PRGR_PRG_INDEX GENMASK_ULL(40, 32)
> +/* Bits 41 - 43 are zeroed */
> +#define RISCV_IOMMU_CMD_ATS_PRGR_RESP_CODE GENMASK_ULL(47, 44)
> +#define RISCV_IOMMU_CMD_ATS_PRGR_DST_ID GENMASK_ULL(63, 48)
> +
> +/**
> + * struct riscv_iommu_fq_record - Fault/Event Queue Record
> + * @hdr: Header, includes fault/event cause, PID/DID, transaction type etc
> + * @_reserved: Low 32bits for custom use, high 32bits for standard use
> + * @iotval: Transaction-type/cause specific format
> + * @iotval2: Cause specific format
> + *
> + * The fault/event queue reports events and failures raised when
> + * processing transactions. Each record is a 32byte structure where
> + * the first dword has a fixed format for providing generic infos
> + * regarding the fault/event, and two more dwords are there for
> + * fault/event-specific information. For more details see section
> + * 3.2.
> + */
> +struct riscv_iommu_fq_record {
> + u64 hdr;
> + u64 _reserved;
> + u64 iotval;
> + u64 iotval2;
> +};
> +
> +/* Fields on header */
> +#define RISCV_IOMMU_FQ_HDR_CAUSE GENMASK_ULL(11, 0)
> +#define RISCV_IOMMU_FQ_HDR_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_FQ_HDR_PV BIT_ULL(32)
> +#define RISCV_IOMMU_FQ_HDR_PRIV BIT_ULL(33)
> +#define RISCV_IOMMU_FQ_HDR_TTYPE GENMASK_ULL(39, 34)
> +#define RISCV_IOMMU_FQ_HDR_DID GENMASK_ULL(63, 40)
> +
> +/**
> + * enum riscv_iommu_fq_causes - Fault/event cause values
> + * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT: Instruction access fault
> + * @RISCV_IOMMU_FQ_CAUSE_RD_ADDR_MISALIGNED: Read address misaligned
> + * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT: Read load fault
> + * @RISCV_IOMMU_FQ_CAUSE_WR_ADDR_MISALIGNED: Write/AMO address misaligned
> + * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT: Write/AMO access fault
> + * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT_S: Instruction page fault
> + * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S: Read page fault
> + * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S: Write/AMO page fault
> + * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT_VS: Instruction guest page fault
> + * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS: Read guest page fault
> + * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS: Write/AMO guest page fault
> + * @RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED: All inbound transactions disallowed
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_LOAD_FAULT: DDT entry load access fault
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_INVALID: DDT entry invalid
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_MISCONFIGURED: DDT entry misconfigured
> + * @RISCV_IOMMU_FQ_CAUSE_TTYPE_BLOCKED: Transaction type disallowed
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_LOAD_FAULT: MSI PTE load access fault
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_INVALID: MSI PTE invalid
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_MISCONFIGURED: MSI PTE misconfigured
> + * @RISCV_IOMMU_FQ_CAUSE_MRIF_FAULT: MRIF access fault
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_LOAD_FAULT: PDT entry load access fault
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_INVALID: PDT entry invalid
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_MISCONFIGURED: PDT entry misconfigured
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_CORRUPTED: DDT data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_CORRUPTED: PDT data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_PT_CORRUPTED: MSI page table data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_MRIF_CORRUIPTED: MRIF data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_INTERNAL_DP_ERROR: Internal data path error
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_WR_FAULT: IOMMU MSI write access fault
> + * @RISCV_IOMMU_FQ_CAUSE_PT_CORRUPTED: First/second stage page table data corruption
> + *
> + * Values are on table 11 of the spec, encodings 275 - 2047 are reserved for standard
> + * use, and 2048 - 4095 for custom use.
> + */
> +enum riscv_iommu_fq_causes {
> + RISCV_IOMMU_FQ_CAUSE_INST_FAULT = 1,
> + RISCV_IOMMU_FQ_CAUSE_RD_ADDR_MISALIGNED = 4,
> + RISCV_IOMMU_FQ_CAUSE_RD_FAULT = 5,
> + RISCV_IOMMU_FQ_CAUSE_WR_ADDR_MISALIGNED = 6,
> + RISCV_IOMMU_FQ_CAUSE_WR_FAULT = 7,
> + RISCV_IOMMU_FQ_CAUSE_INST_FAULT_S = 12,
> + RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S = 13,
> + RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S = 15,
> + RISCV_IOMMU_FQ_CAUSE_INST_FAULT_VS = 20,
> + RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS = 21,
> + RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS = 23,
> + RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED = 256,
> + RISCV_IOMMU_FQ_CAUSE_DDT_LOAD_FAULT = 257,
> + RISCV_IOMMU_FQ_CAUSE_DDT_INVALID = 258,
> + RISCV_IOMMU_FQ_CAUSE_DDT_MISCONFIGURED = 259,
> + RISCV_IOMMU_FQ_CAUSE_TTYPE_BLOCKED = 260,
> + RISCV_IOMMU_FQ_CAUSE_MSI_LOAD_FAULT = 261,
> + RISCV_IOMMU_FQ_CAUSE_MSI_INVALID = 262,
> + RISCV_IOMMU_FQ_CAUSE_MSI_MISCONFIGURED = 263,
> + RISCV_IOMMU_FQ_CAUSE_MRIF_FAULT = 264,
> + RISCV_IOMMU_FQ_CAUSE_PDT_LOAD_FAULT = 265,
> + RISCV_IOMMU_FQ_CAUSE_PDT_INVALID = 266,
> + RISCV_IOMMU_FQ_CAUSE_PDT_MISCONFIGURED = 267,
> + RISCV_IOMMU_FQ_CAUSE_DDT_CORRUPTED = 268,
> + RISCV_IOMMU_FQ_CAUSE_PDT_CORRUPTED = 269,
> + RISCV_IOMMU_FQ_CAUSE_MSI_PT_CORRUPTED = 270,
> + RISCV_IOMMU_FQ_CAUSE_MRIF_CORRUIPTED = 271,
> + RISCV_IOMMU_FQ_CAUSE_INTERNAL_DP_ERROR = 272,
> + RISCV_IOMMU_FQ_CAUSE_MSI_WR_FAULT = 273,
> + RISCV_IOMMU_FQ_CAUSE_PT_CORRUPTED = 274
> +};
> +
> +/**
> + * enum riscv_iommu_fq_ttypes: Fault/event transaction types
> + * @RISCV_IOMMU_FQ_TTYPE_NONE: None. Fault not caused by an inbound transaction.
> + * @RISCV_IOMMU_FQ_TTYPE_UADDR_INST_FETCH: Instruction fetch from untranslated address
> + * @RISCV_IOMMU_FQ_TTYPE_UADDR_RD: Read from untranslated address
> + * @RISCV_IOMMU_FQ_TTYPE_UADDR_WR: Write/AMO to untranslated address
> + * @RISCV_IOMMU_FQ_TTYPE_TADDR_INST_FETCH: Instruction fetch from translated address
> + * @RISCV_IOMMU_FQ_TTYPE_TADDR_RD: Read from translated address
> + * @RISCV_IOMMU_FQ_TTYPE_TADDR_WR: Write/AMO to translated address
> + * @RISCV_IOMMU_FQ_TTYPE_PCIE_ATS_REQ: PCIe ATS translation request
> + * @RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ: PCIe message request
> + *
> + * Values are on table 12 of the spec, type 4 and 10 - 31 are reserved for standard use
> + * and 31 - 63 for custom use.
> + */
> +enum riscv_iommu_fq_ttypes {
> + RISCV_IOMMU_FQ_TTYPE_NONE = 0,
> + RISCV_IOMMU_FQ_TTYPE_UADDR_INST_FETCH = 1,
> + RISCV_IOMMU_FQ_TTYPE_UADDR_RD = 2,
> + RISCV_IOMMU_FQ_TTYPE_UADDR_WR = 3,
> + RISCV_IOMMU_FQ_TTYPE_TADDR_INST_FETCH = 5,
> + RISCV_IOMMU_FQ_TTYPE_TADDR_RD = 6,
> + RISCV_IOMMU_FQ_TTYPE_TADDR_WR = 7,
> + RISCV_IOMMU_FQ_TTYPE_PCIE_ATS_REQ = 8,
> + RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ = 9,
> +};
> +
> +/**
> + * struct riscv_iommu_pq_record - PCIe Page Request record
> + * @hdr: Header, includes PID, DID etc
> + * @payload: Holds the page address, request group and permission bits
> + *
> + * For more infos on the PCIe Page Request queue see chapter 3.3.
> + */
> +struct riscv_iommu_pq_record {
> + u64 hdr;
> + u64 payload;
> +};
> +
> +/* Header fields */
> +#define RISCV_IOMMU_PREQ_HDR_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_PREQ_HDR_PV BIT_ULL(32)
> +#define RISCV_IOMMU_PREQ_HDR_PRIV BIT_ULL(33)
> +#define RISCV_IOMMU_PREQ_HDR_EXEC BIT_ULL(34)
> +#define RISCV_IOMMU_PREQ_HDR_DID GENMASK_ULL(63, 40)
> +
> +/* Payload fields */
> +#define RISCV_IOMMU_PREQ_PAYLOAD_R BIT_ULL(0)
> +#define RISCV_IOMMU_PREQ_PAYLOAD_W BIT_ULL(1)
> +#define RISCV_IOMMU_PREQ_PAYLOAD_L BIT_ULL(2)
> +#define RISCV_IOMMU_PREQ_PAYLOAD_M GENMASK_ULL(2, 0) /* Mask of RWL for convenience */
> +#define RISCV_IOMMU_PREQ_PRG_INDEX GENMASK_ULL(11, 3)
> +#define RISCV_IOMMU_PREQ_UADDR GENMASK_ULL(63, 12)
> +
> +/**
> + * struct riscv_iommu_msi_pte - MSI Page Table Entry
> + * @pte: MSI PTE
> + * @mrif_info: Memory-resident interrupt file info
> + *
> + * The MSI Page Table is used for virtualizing MSIs, so that when
> + * a device sends an MSI to a guest, the IOMMU can reroute it
> + * by translating the MSI address, either to a guest interrupt file
> + * or a memory resident interrupt file (MRIF). Note that this page table
> + * is an array of MSI PTEs, not a multi-level pt, each entry
> + * is a leaf entry. For more infos check out the the AIA spec, chapter 9.5.
> + *
> + * Also in basic mode the mrif_info field is ignored by the IOMMU and can
> + * be used by software, any other reserved fields on pte must be zeroed-out
> + * by software.
> + */
> +struct riscv_iommu_msi_pte {
> + u64 pte;
> + u64 mrif_info;
> +};
> +
> +/* Fields on pte */
> +#define RISCV_IOMMU_MSI_PTE_V BIT_ULL(0)
> +#define RISCV_IOMMU_MSI_PTE_M GENMASK_ULL(2, 1)
> +#define RISCV_IOMMU_MSI_PTE_MRIF_ADDR GENMASK_ULL(53, 7) /* When M == 1 (MRIF mode) */
> +#define RISCV_IOMMU_MSI_PTE_PPN RISCV_IOMMU_PPN_FIELD /* When M == 3 (basic mode) */
> +#define RISCV_IOMMU_MSI_PTE_C BIT_ULL(63)
> +
> +/* Fields on mrif_info */
> +#define RISCV_IOMMU_MSI_MRIF_NID GENMASK_ULL(9, 0)
> +#define RISCV_IOMMU_MSI_MRIF_NPPN RISCV_IOMMU_PPN_FIELD
> +#define RISCV_IOMMU_MSI_MRIF_NID_MSB BIT_ULL(60)
> +
> +#endif /* _RISCV_IOMMU_BITS_H_ */
> diff --git a/drivers/iommu/riscv/iommu-pci.c b/drivers/iommu/riscv/iommu-pci.c
> new file mode 100644
> index 000000000000..c91f963d7a29
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-pci.c
> @@ -0,0 +1,134 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * RISCV IOMMU as a PCIe device
> + *
> + * Authors
> + * Tomasz Jeznach <[email protected]>
> + * Nick Kossifidis <[email protected]>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/compiler.h>
> +#include <linux/pci.h>
> +#include <linux/init.h>
> +#include <linux/iommu.h>
> +#include <linux/bitfield.h>
> +
> +#include "iommu.h"
> +
> +/* Rivos Inc. assigned PCI Vendor and Device IDs */
> +#ifndef PCI_VENDOR_ID_RIVOS
> +#define PCI_VENDOR_ID_RIVOS 0x1efd
> +#endif
> +
> +#ifndef PCI_DEVICE_ID_RIVOS_IOMMU
> +#define PCI_DEVICE_ID_RIVOS_IOMMU 0xedf1
> +#endif
> +
> +static int riscv_iommu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> +{
> + struct device *dev = &pdev->dev;
> + struct riscv_iommu_device *iommu;
> + int ret;
> +
> + ret = pci_enable_device_mem(pdev);
> + if (ret < 0)
> + return ret;
> +
> + ret = pci_request_mem_regions(pdev, KBUILD_MODNAME);
> + if (ret < 0)
> + goto fail;
> +
> + ret = -ENOMEM;
> +
> + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> + if (!iommu)
> + goto fail;
> +
> + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM))
> + goto fail;
> +
> + if (pci_resource_len(pdev, 0) < RISCV_IOMMU_REG_SIZE)
> + goto fail;
> +
> + iommu->reg_phys = pci_resource_start(pdev, 0);
> + if (!iommu->reg_phys)
> + goto fail;
> +
> + iommu->reg = devm_ioremap(dev, iommu->reg_phys, RISCV_IOMMU_REG_SIZE);
> + if (!iommu->reg)
> + goto fail;
> +
> + iommu->dev = dev;
> + dev_set_drvdata(dev, iommu);
> +
> + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
> + pci_set_master(pdev);
> +
> + ret = riscv_iommu_init(iommu);
> + if (!ret)
> + return ret;
> +
> + fail:
> + pci_clear_master(pdev);
> + pci_release_regions(pdev);
> + pci_disable_device(pdev);
> + /* Note: devres_release_all() will release iommu and iommu->reg */
> + return ret;
> +}
> +
> +static void riscv_iommu_pci_remove(struct pci_dev *pdev)
> +{
> + riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
> + pci_clear_master(pdev);
> + pci_release_regions(pdev);
> + pci_disable_device(pdev);
> +}
> +
> +static int riscv_iommu_suspend(struct device *dev)
> +{
> + dev_warn(dev, "RISC-V IOMMU PM not implemented");
> + return -ENODEV;
> +}
> +
> +static int riscv_iommu_resume(struct device *dev)
> +{
> + dev_warn(dev, "RISC-V IOMMU PM not implemented");
> + return -ENODEV;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(riscv_iommu_pm_ops, riscv_iommu_suspend,
> + riscv_iommu_resume);
> +
> +static const struct pci_device_id riscv_iommu_pci_tbl[] = {
> + {PCI_VENDOR_ID_RIVOS, PCI_DEVICE_ID_RIVOS_IOMMU,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {0,}
> +};
> +
> +MODULE_DEVICE_TABLE(pci, riscv_iommu_pci_tbl);
> +
> +static const struct of_device_id riscv_iommu_of_match[] = {
> + {.compatible = "riscv,pci-iommu",},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, riscv_iommu_of_match);
> +
> +static struct pci_driver riscv_iommu_pci_driver = {
> + .name = KBUILD_MODNAME,
> + .id_table = riscv_iommu_pci_tbl,
> + .probe = riscv_iommu_pci_probe,
> + .remove = riscv_iommu_pci_remove,
> + .driver = {
> + .pm = pm_sleep_ptr(&riscv_iommu_pm_ops),
> + .of_match_table = riscv_iommu_of_match,
> + },
> +};
> +
> +module_driver(riscv_iommu_pci_driver, pci_register_driver, pci_unregister_driver);
> diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c
> new file mode 100644
> index 000000000000..e4e8ca6711e7
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-platform.c
> @@ -0,0 +1,94 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * RISC-V IOMMU as a platform device
> + *
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * Author: Nick Kossifidis <[email protected]>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of_platform.h>
> +#include <linux/bitfield.h>
> +
> +#include "iommu-bits.h"
> +#include "iommu.h"
> +
> +static int riscv_iommu_platform_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct riscv_iommu_device *iommu = NULL;
> + struct resource *res = NULL;
> + int ret = 0;
> +
> + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> + if (!iommu)
> + return -ENOMEM;
> +
> + iommu->dev = dev;
> + dev_set_drvdata(dev, iommu);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev, "could not find resource for register region\n");
> + return -EINVAL;
> + }
> +
> + iommu->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(iommu->reg)) {
> + ret = dev_err_probe(dev, PTR_ERR(iommu->reg),
> + "could not map register region\n");
> + goto fail;
> + };
> +
> + iommu->reg_phys = res->start;
> +
> + ret = -ENODEV;
> +
> + /* Sanity check: Did we get the whole register space ? */
> + if ((res->end - res->start + 1) < RISCV_IOMMU_REG_SIZE) {
> + dev_err(dev, "device region smaller than register file (0x%llx)\n",
> + res->end - res->start);
> + goto fail;
> + }
Could we assume that DT should be responsible for specifying the right size?
> +
> + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> +
> + return riscv_iommu_init(iommu);
> +
> + fail:
> + /* Note: devres_release_all() will release iommu and iommu->reg */
> + return ret;
> +};
> +
> +static void riscv_iommu_platform_remove(struct platform_device *pdev)
> +{
> + riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
> +};
> +
> +static void riscv_iommu_platform_shutdown(struct platform_device *pdev)
> +{
> + return;
> +};
> +
> +static const struct of_device_id riscv_iommu_of_match[] = {
> + {.compatible = "riscv,iommu",},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, riscv_iommu_of_match);
> +
> +static struct platform_driver riscv_iommu_platform_driver = {
> + .driver = {
> + .name = "riscv,iommu",
> + .of_match_table = riscv_iommu_of_match,
> + .suppress_bind_attrs = true,
> + },
> + .probe = riscv_iommu_platform_probe,
> + .remove_new = riscv_iommu_platform_remove,
> + .shutdown = riscv_iommu_platform_shutdown,
> +};
> +
> +module_driver(riscv_iommu_platform_driver, platform_driver_register,
> + platform_driver_unregister);
> diff --git a/drivers/iommu/riscv/iommu.c b/drivers/iommu/riscv/iommu.c
> new file mode 100644
> index 000000000000..8c236242e2cc
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu.c
> @@ -0,0 +1,660 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * IOMMU API for RISC-V architected Ziommu implementations.
> + *
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * Authors
> + * Tomasz Jeznach <[email protected]>
> + * Nick Kossifidis <[email protected]>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/bitfield.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/compiler.h>
> +#include <linux/pci.h>
> +#include <linux/pci-ats.h>
> +#include <linux/init.h>
> +#include <linux/completion.h>
> +#include <linux/uaccess.h>
> +#include <linux/iommu.h>
> +#include <linux/irqdomain.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-map-ops.h>
> +#include <asm/page.h>
> +
> +#include "../dma-iommu.h"
> +#include "../iommu-sva.h"
> +#include "iommu.h"
> +
> +#include <asm/csr.h>
> +#include <asm/delay.h>
> +
> +MODULE_DESCRIPTION("IOMMU driver for RISC-V architected Ziommu implementations");
> +MODULE_AUTHOR("Tomasz Jeznach <[email protected]>");
> +MODULE_AUTHOR("Nick Kossifidis <[email protected]>");
> +MODULE_ALIAS("riscv-iommu");
> +MODULE_LICENSE("GPL v2");
> +
> +/* Global IOMMU params. */
> +static int ddt_mode = RISCV_IOMMU_DDTP_MODE_BARE;
> +module_param(ddt_mode, int, 0644);
> +MODULE_PARM_DESC(ddt_mode, "Device Directory Table mode.");
> +
> +/* IOMMU PSCID allocation namespace. */
> +#define RISCV_IOMMU_MAX_PSCID (1U << 20)
> +static DEFINE_IDA(riscv_iommu_pscids);
> +
> +/* 1 second */
> +#define RISCV_IOMMU_TIMEOUT riscv_timebase
> +
> +/* RISC-V IOMMU PPN <> PHYS address conversions, PHYS <=> PPN[53:10] */
> +#define phys_to_ppn(va) (((va) >> 2) & (((1ULL << 44) - 1) << 10))
> +#define ppn_to_phys(pn) (((pn) << 2) & (((1ULL << 44) - 1) << 12))
> +
> +#define iommu_domain_to_riscv(iommu_domain) \
> + container_of(iommu_domain, struct riscv_iommu_domain, domain)
> +
> +#define iommu_device_to_riscv(iommu_device) \
> + container_of(iommu_device, struct riscv_iommu, iommu)
> +
> +static const struct iommu_domain_ops riscv_iommu_domain_ops;
> +static const struct iommu_ops riscv_iommu_ops;
> +
> +/*
> + * Register device for IOMMU tracking.
> + */
> +static void riscv_iommu_add_device(struct riscv_iommu_device *iommu, struct device *dev)
> +{
> + struct riscv_iommu_endpoint *ep, *rb_ep;
> + struct rb_node **new_node, *parent_node = NULL;
> +
> + mutex_lock(&iommu->eps_mutex);
> +
> + ep = dev_iommu_priv_get(dev);
> +
> + new_node = &(iommu->eps.rb_node);
> + while (*new_node) {
> + rb_ep = rb_entry(*new_node, struct riscv_iommu_endpoint, node);
> + parent_node = *new_node;
> + if (rb_ep->devid > ep->devid) {
> + new_node = &((*new_node)->rb_left);
> + } else if (rb_ep->devid < ep->devid) {
> + new_node = &((*new_node)->rb_right);
> + } else {
> + dev_warn(dev, "device %u already in the tree\n", ep->devid);
> + break;
> + }
> + }
> +
> + rb_link_node(&ep->node, parent_node, new_node);
> + rb_insert_color(&ep->node, &iommu->eps);
> +
> + mutex_unlock(&iommu->eps_mutex);
> +}
> +
> +/*
> + * Endpoint management
> + */
> +
> +static int riscv_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
> +{
> + return iommu_fwspec_add_ids(dev, args->args, 1);
> +}
> +
> +static bool riscv_iommu_capable(struct device *dev, enum iommu_cap cap)
> +{
> + switch (cap) {
> + case IOMMU_CAP_CACHE_COHERENCY:
> + case IOMMU_CAP_PRE_BOOT_PROTECTION:
> + return true;
> +
> + default:
> + break;
> + }
> +
> + return false;
> +}
> +
> +static struct iommu_device *riscv_iommu_probe_device(struct device *dev)
> +{
> + struct riscv_iommu_device *iommu;
> + struct riscv_iommu_endpoint *ep;
> + struct iommu_fwspec *fwspec;
> +
> + fwspec = dev_iommu_fwspec_get(dev);
> + if (!fwspec || fwspec->ops != &riscv_iommu_ops ||
> + !fwspec->iommu_fwnode || !fwspec->iommu_fwnode->dev)
> + return ERR_PTR(-ENODEV);
> +
> + iommu = dev_get_drvdata(fwspec->iommu_fwnode->dev);
> + if (!iommu)
> + return ERR_PTR(-ENODEV);
> +
> + if (dev_iommu_priv_get(dev))
> + return &iommu->iommu;
> +
> + ep = kzalloc(sizeof(*ep), GFP_KERNEL);
> + if (!ep)
> + return ERR_PTR(-ENOMEM);
> +
> + mutex_init(&ep->lock);
> + INIT_LIST_HEAD(&ep->domain);
> +
> + if (dev_is_pci(dev)) {
> + ep->devid = pci_dev_id(to_pci_dev(dev));
> + ep->domid = pci_domain_nr(to_pci_dev(dev)->bus);
> + } else {
> + /* TODO: Make this generic, for now hardcode domain id to 0 */
> + ep->devid = fwspec->ids[0];
> + ep->domid = 0;
> + }
> +
> + ep->iommu = iommu;
> + ep->dev = dev;
> +
> + dev_info(iommu->dev, "adding device to iommu with devid %i in domain %i\n",
> + ep->devid, ep->domid);
> +
> + dev_iommu_priv_set(dev, ep);
> + riscv_iommu_add_device(iommu, dev);
> +
> + return &iommu->iommu;
> +}
> +
> +static void riscv_iommu_probe_finalize(struct device *dev)
> +{
> + set_dma_ops(dev, NULL);
> + iommu_setup_dma_ops(dev, 0, U64_MAX);
> +}
> +
> +static void riscv_iommu_release_device(struct device *dev)
> +{
> + struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
> + struct riscv_iommu_device *iommu = ep->iommu;
> +
> + dev_info(dev, "device with devid %i released\n", ep->devid);
> +
> + mutex_lock(&ep->lock);
> + list_del(&ep->domain);
> + mutex_unlock(&ep->lock);
> +
> + /* Remove endpoint from IOMMU tracking structures */
> + mutex_lock(&iommu->eps_mutex);
> + rb_erase(&ep->node, &iommu->eps);
> + mutex_unlock(&iommu->eps_mutex);
> +
> + set_dma_ops(dev, NULL);
> + dev_iommu_priv_set(dev, NULL);
> +
> + kfree(ep);
> +}
> +
> +static struct iommu_group *riscv_iommu_device_group(struct device *dev)
> +{
> + if (dev_is_pci(dev))
> + return pci_device_group(dev);
> + return generic_device_group(dev);
> +}
> +
> +static void riscv_iommu_get_resv_regions(struct device *dev, struct list_head *head)
> +{
> + iommu_dma_get_resv_regions(dev, head);
> +}
> +
> +/*
> + * Domain management
> + */
> +
> +static struct iommu_domain *riscv_iommu_domain_alloc(unsigned type)
> +{
> + struct riscv_iommu_domain *domain;
> +
> + if (type != IOMMU_DOMAIN_IDENTITY &&
> + type != IOMMU_DOMAIN_BLOCKED)
> + return NULL;
> +
> + domain = kzalloc(sizeof(*domain), GFP_KERNEL);
> + if (!domain)
> + return NULL;
> +
> + mutex_init(&domain->lock);
> + INIT_LIST_HEAD(&domain->endpoints);
> +
> + domain->domain.ops = &riscv_iommu_domain_ops;
> + domain->mode = RISCV_IOMMU_DC_FSC_MODE_BARE;
> + domain->pscid = ida_alloc_range(&riscv_iommu_pscids, 1,
> + RISCV_IOMMU_MAX_PSCID, GFP_KERNEL);
> +
> + printk("domain type %x alloc %u\n", type, domain->pscid);
> +
Could it uses pr_xxx instead of printk?
> + return &domain->domain;
> +}
> +
> +static void riscv_iommu_domain_free(struct iommu_domain *iommu_domain)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (!list_empty(&domain->endpoints)) {
> + pr_warn("IOMMU domain is not empty!\n");
> + }
> +
> + if (domain->pgd_root)
> + free_pages((unsigned long)domain->pgd_root, 0);
> +
> + if ((int)domain->pscid > 0)
> + ida_free(&riscv_iommu_pscids, domain->pscid);
> +
> + printk("domain free %u\n", domain->pscid);
> +
Could it uses pr_xxx instead of printk?
> + kfree(domain);
> +}
> +
> +static int riscv_iommu_domain_finalize(struct riscv_iommu_domain *domain,
> + struct riscv_iommu_device *iommu)
> +{
> + struct iommu_domain_geometry *geometry;
> +
> + /* Domain assigned to another iommu */
> + if (domain->iommu && domain->iommu != iommu)
> + return -EINVAL;
> + /* Domain already initialized */
> + else if (domain->iommu)
> + return 0;
> +
> + /*
> + * TODO: Before using VA_BITS and satp_mode here, verify they
> + * are supported by the iommu, through the capabilities register.
> + */
> +
> + geometry = &domain->domain.geometry;
> +
> + /*
> + * Note: RISC-V Privilege spec mandates that virtual addresses
> + * need to be sign-extended, so if (VA_BITS - 1) is set, all
> + * bits >= VA_BITS need to also be set or else we'll get a
> + * page fault. However the code that creates the mappings
> + * above us (e.g. iommu_dma_alloc_iova()) won't do that for us
> + * for now, so we'll end up with invalid virtual addresses
> + * to map. As a workaround until we get this sorted out
> + * limit the available virtual addresses to VA_BITS - 1.
> + */
> + geometry->aperture_start = 0;
> + geometry->aperture_end = DMA_BIT_MASK(VA_BITS - 1);
> + geometry->force_aperture = true;
> +
> + domain->iommu = iommu;
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
> + return 0;
> +
> + /* TODO: Fix this for RV32 */
> + domain->mode = satp_mode >> 60;
> + domain->pgd_root = (pgd_t *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, 0);
> +
> + if (!domain->pgd_root)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> +static int riscv_iommu_attach_dev(struct iommu_domain *iommu_domain, struct device *dev)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> + struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
> + int ret;
> +
> + /* PSCID not valid */
> + if ((int)domain->pscid < 0)
> + return -ENOMEM;
> +
> + mutex_lock(&domain->lock);
> + mutex_lock(&ep->lock);
> +
> + if (!list_empty(&ep->domain)) {
> + dev_warn(dev, "endpoint already attached to a domain. dropping\n");
> + list_del_init(&ep->domain);
> + }
> +
> + /* allocate root pages, initialize io-pgtable ops, etc. */
> + ret = riscv_iommu_domain_finalize(domain, ep->iommu);
> + if (ret < 0) {
> + dev_err(dev, "can not finalize domain: %d\n", ret);
> + mutex_unlock(&ep->lock);
> + mutex_unlock(&domain->lock);
> + return ret;
> + }
> +
> + if (ep->iommu->ddt_mode != RISCV_IOMMU_DDTP_MODE_BARE ||
> + domain->domain.type != IOMMU_DOMAIN_IDENTITY) {
> + dev_warn(dev, "domain type %d not supported\n",
> + domain->domain.type);
> + return -ENODEV;
> + }
> +
> + list_add_tail(&ep->domain, &domain->endpoints);
> + mutex_unlock(&ep->lock);
> + mutex_unlock(&domain->lock);
> +
> + dev_info(dev, "domain type %d attached w/ PSCID %u\n",
> + domain->domain.type, domain->pscid);
> +
> + return 0;
> +}
> +
> +static void riscv_iommu_flush_iotlb_range(struct iommu_domain *iommu_domain,
> + unsigned long *start, unsigned long *end,
> + size_t *pgsize)
> +{
> + /* Command interface not implemented */
> +}
> +
> +static void riscv_iommu_flush_iotlb_all(struct iommu_domain *iommu_domain)
> +{
> + riscv_iommu_flush_iotlb_range(iommu_domain, NULL, NULL, NULL);
> +}
> +
> +static void riscv_iommu_iotlb_sync(struct iommu_domain *iommu_domain,
> + struct iommu_iotlb_gather *gather)
> +{
> + riscv_iommu_flush_iotlb_range(iommu_domain, &gather->start, &gather->end,
> + &gather->pgsize);
> +}
> +
> +static void riscv_iommu_iotlb_sync_map(struct iommu_domain *iommu_domain,
> + unsigned long iova, size_t size)
> +{
> + unsigned long end = iova + size - 1;
> + /*
> + * Given we don't know the page size used by this range, we assume the
> + * smallest page size to ensure all possible entries are flushed from
> + * the IOATC.
> + */
> + size_t pgsize = PAGE_SIZE;
> + riscv_iommu_flush_iotlb_range(iommu_domain, &iova, &end, &pgsize);
> +}
> +
> +static int riscv_iommu_map_pages(struct iommu_domain *iommu_domain,
> + unsigned long iova, phys_addr_t phys,
> + size_t pgsize, size_t pgcount, int prot,
> + gfp_t gfp, size_t *mapped)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY) {
> + *mapped = pgsize * pgcount;
> + return 0;
> + }
> +
> + return -ENODEV;
> +}
> +
> +static size_t riscv_iommu_unmap_pages(struct iommu_domain *iommu_domain,
> + unsigned long iova, size_t pgsize,
> + size_t pgcount, struct iommu_iotlb_gather *gather)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
> + return pgsize * pgcount;
> +
> + return 0;
> +}
> +
> +static phys_addr_t riscv_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
> + dma_addr_t iova)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
> + return (phys_addr_t) iova;
> +
> + return 0;
> +}
> +
> +/*
> + * Translation mode setup
> + */
> +
> +static u64 riscv_iommu_get_ddtp(struct riscv_iommu_device *iommu)
> +{
> + u64 ddtp;
> + cycles_t end_cycles = RISCV_IOMMU_TIMEOUT + get_cycles();
> +
> + /* Wait for DDTP.BUSY to be cleared and return latest value */
> + do {
> + ddtp = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_DDTP);
> + if (!(ddtp & RISCV_IOMMU_DDTP_BUSY))
> + break;
> + cpu_relax();
> + } while (get_cycles() < end_cycles);
> +
> + return ddtp;
> +}
> +
> +static void riscv_iommu_ddt_cleanup(struct riscv_iommu_device *iommu)
> +{
> + /* TODO: teardown whole device directory tree. */
> + if (iommu->ddtp) {
> + if (iommu->ddtp_in_iomem) {
> + iounmap((void *)iommu->ddtp);
> + } else
> + free_page(iommu->ddtp);
> + iommu->ddtp = 0;
> + }
> +}
> +
> +static int riscv_iommu_enable(struct riscv_iommu_device *iommu, unsigned requested_mode)
> +{
> + struct device *dev = iommu->dev;
> + u64 ddtp = 0;
> + u64 ddtp_paddr = 0;
> + unsigned mode = requested_mode;
> + unsigned mode_readback = 0;
> +
> + ddtp = riscv_iommu_get_ddtp(iommu);
> + if (ddtp & RISCV_IOMMU_DDTP_BUSY)
> + return -EBUSY;
> +
> + /* Disallow state transtion from xLVL to xLVL. */
> + switch (FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp)) {
> + case RISCV_IOMMU_DDTP_MODE_BARE:
> + case RISCV_IOMMU_DDTP_MODE_OFF:
> + break;
> + default:
> + if ((mode != RISCV_IOMMU_DDTP_MODE_BARE)
> + && (mode != RISCV_IOMMU_DDTP_MODE_OFF))
> + return -EINVAL;
> + break;
> + }
> +
> + retry:
We need to consider the `iommu.passthrough` before we set up the mode
in switch case, something like
if (iommu_default_passthrough()) {
/* set ddtp to bare mode */
}
> + switch (mode) {
> + case RISCV_IOMMU_DDTP_MODE_BARE:
> + case RISCV_IOMMU_DDTP_MODE_OFF:
> + riscv_iommu_ddt_cleanup(iommu);
> + ddtp = FIELD_PREP(RISCV_IOMMU_DDTP_MODE, mode);
> + break;
> + case RISCV_IOMMU_DDTP_MODE_1LVL:
> + case RISCV_IOMMU_DDTP_MODE_2LVL:
> + case RISCV_IOMMU_DDTP_MODE_3LVL:
> + if (!iommu->ddtp) {
> + /*
> + * We haven't initialized ddtp yet, since it's WARL make
> + * sure that we don't have a hardwired PPN field there
> + * that points to i/o memory instead.
> + */
> + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, 0);
> + ddtp = riscv_iommu_get_ddtp(iommu);
> + ddtp_paddr = ppn_to_phys(ddtp);
> + if (ddtp_paddr) {
> + dev_warn(dev, "ddtp at 0x%llx\n", ddtp_paddr);
> + iommu->ddtp =
> + (unsigned long)ioremap(ddtp_paddr, PAGE_SIZE);
> + iommu->ddtp_in_iomem = true;
> + } else {
> + iommu->ddtp = get_zeroed_page(GFP_KERNEL);
> + }
> + }
> + if (!iommu->ddtp)
> + return -ENOMEM;
> +
> + ddtp = FIELD_PREP(RISCV_IOMMU_DDTP_MODE, mode) |
> + phys_to_ppn(__pa(iommu->ddtp));
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, ddtp);
> + ddtp = riscv_iommu_get_ddtp(iommu);
> + if (ddtp & RISCV_IOMMU_DDTP_BUSY) {
> + dev_warn(dev, "timeout when setting ddtp (ddt mode: %i)\n", mode);
> + return -EBUSY;
> + }
> +
> + mode_readback = FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp);
> + dev_info(dev, "mode_readback: %i, mode: %i\n", mode_readback, mode);
> + if (mode_readback != mode) {
> + /*
> + * Mode field is WARL, an I/O MMU may support a subset of
> + * directory table levels in which case if we tried to set
> + * an unsupported number of levels we'll readback either
> + * a valid xLVL or off/bare. If we got off/bare, try again
> + * with a smaller xLVL.
> + */
> + if (mode_readback < RISCV_IOMMU_DDTP_MODE_1LVL &&
> + mode > RISCV_IOMMU_DDTP_MODE_1LVL) {
> + mode--;
> + goto retry;
> + }
> +
> + /*
> + * We tried all supported xLVL modes and still got off/bare instead,
> + * an I/O MMU must support at least one supported xLVL mode so something
> + * went very wrong.
> + */
> + if (mode_readback < RISCV_IOMMU_DDTP_MODE_1LVL &&
> + mode == RISCV_IOMMU_DDTP_MODE_1LVL)
> + goto fail;
> +
> + /*
> + * We tried setting off or bare and got something else back, something
> + * went very wrong since off/bare is always legal.
> + */
> + if (mode < RISCV_IOMMU_DDTP_MODE_1LVL)
> + goto fail;
> +
> + /*
> + * We tried setting an xLVL mode but got another xLVL mode that
> + * we don't support (e.g. a custom one).
> + */
> + if (mode_readback > RISCV_IOMMU_DDTP_MODE_MAX)
> + goto fail;
> +
> + /* We tried setting an xLVL mode but got another supported xLVL mode */
> + mode = mode_readback;
> + }
> +
> + if (mode != requested_mode)
> + dev_warn(dev, "unsupported DDT mode requested (%i), using %i instead\n",
> + requested_mode, mode);
> +
> + iommu->ddt_mode = mode;
> + dev_info(dev, "ddt_mode: %i\n", iommu->ddt_mode);
> + return 0;
> +
> + fail:
> + dev_err(dev, "failed to set DDT mode, tried: %i and got %i\n", mode,
> + mode_readback);
> + riscv_iommu_ddt_cleanup(iommu);
> + return -EINVAL;
> +}
> +
> +/*
> + * Common I/O MMU driver probe/teardown
> + */
> +
> +static const struct iommu_domain_ops riscv_iommu_domain_ops = {
> + .free = riscv_iommu_domain_free,
> + .attach_dev = riscv_iommu_attach_dev,
> + .map_pages = riscv_iommu_map_pages,
> + .unmap_pages = riscv_iommu_unmap_pages,
> + .iova_to_phys = riscv_iommu_iova_to_phys,
> + .iotlb_sync = riscv_iommu_iotlb_sync,
> + .iotlb_sync_map = riscv_iommu_iotlb_sync_map,
> + .flush_iotlb_all = riscv_iommu_flush_iotlb_all,
> +};
> +
> +static const struct iommu_ops riscv_iommu_ops = {
> + .owner = THIS_MODULE,
> + .pgsize_bitmap = SZ_4K | SZ_2M | SZ_512M,
> + .capable = riscv_iommu_capable,
> + .domain_alloc = riscv_iommu_domain_alloc,
> + .probe_device = riscv_iommu_probe_device,
> + .probe_finalize = riscv_iommu_probe_finalize,
> + .release_device = riscv_iommu_release_device,
> + .device_group = riscv_iommu_device_group,
> + .get_resv_regions = riscv_iommu_get_resv_regions,
> + .of_xlate = riscv_iommu_of_xlate,
> + .default_domain_ops = &riscv_iommu_domain_ops,
> +};
> +
> +void riscv_iommu_remove(struct riscv_iommu_device *iommu)
> +{
> + iommu_device_unregister(&iommu->iommu);
> + riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_OFF);
> +}
> +
> +int riscv_iommu_init(struct riscv_iommu_device *iommu)
> +{
> + struct device *dev = iommu->dev;
> + u32 fctl = 0;
> + int ret;
> +
> + iommu->eps = RB_ROOT;
> +
> + fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL);
> +
> +#ifdef CONFIG_CPU_BIG_ENDIAN
> + if (!(cap & RISCV_IOMMU_CAP_END)) {
> + dev_err(dev, "IOMMU doesn't support Big Endian\n");
> + return -EIO;
> + } else if (!(fctl & RISCV_IOMMU_FCTL_BE)) {
> + fctl |= FIELD_PREP(RISCV_IOMMU_FCTL_BE, 1);
> + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, fctl);
> + }
> +#endif
> +
> + /* Clear any pending interrupt flag. */
> + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_IPSR,
> + RISCV_IOMMU_IPSR_CIP |
> + RISCV_IOMMU_IPSR_FIP |
> + RISCV_IOMMU_IPSR_PMIP | RISCV_IOMMU_IPSR_PIP);
> + spin_lock_init(&iommu->cq_lock);
> + mutex_init(&iommu->eps_mutex);
> +
> + ret = riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_BARE);
> +
> + if (ret) {
> + dev_err(dev, "cannot enable iommu device (%d)\n", ret);
> + goto fail;
> + }
> +
> + ret = iommu_device_register(&iommu->iommu, &riscv_iommu_ops, dev);
> + if (ret) {
> + dev_err(dev, "cannot register iommu interface (%d)\n", ret);
> + iommu_device_sysfs_remove(&iommu->iommu);
> + goto fail;
> + }
> +
> + return 0;
> + fail:
> + riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_OFF);
> + return ret;
> +}
> diff --git a/drivers/iommu/riscv/iommu.h b/drivers/iommu/riscv/iommu.h
> new file mode 100644
> index 000000000000..7baefd3630b3
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu.h
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * RISC-V Ziommu - IOMMU Interface Specification.
> + *
> + * Authors
> + * Tomasz Jeznach <[email protected]>
> + * Nick Kossifidis <[email protected]>
> + */
> +
> +#ifndef _RISCV_IOMMU_H_
> +#define _RISCV_IOMMU_H_
> +
> +#include <linux/types.h>
> +#include <linux/iova.h>
> +#include <linux/io.h>
> +#include <linux/idr.h>
> +#include <linux/list.h>
> +#include <linux/iommu.h>
> +#include <linux/io-pgtable.h>
> +
> +#include "iommu-bits.h"
> +
> +#define IOMMU_PAGE_SIZE_4K BIT_ULL(12)
> +#define IOMMU_PAGE_SIZE_2M BIT_ULL(21)
> +#define IOMMU_PAGE_SIZE_1G BIT_ULL(30)
> +#define IOMMU_PAGE_SIZE_512G BIT_ULL(39)
> +
> +struct riscv_iommu_device {
> + struct iommu_device iommu; /* iommu core interface */
> + struct device *dev; /* iommu hardware */
> +
> + /* hardware control register space */
> + void __iomem *reg;
> + resource_size_t reg_phys;
> +
> + /* IRQs for the various queues */
> + int irq_cmdq;
> + int irq_fltq;
> + int irq_pm;
> + int irq_priq;
> +
> + /* supported and enabled hardware capabilities */
> + u64 cap;
> +
> + /* global lock, to be removed */
> + spinlock_t cq_lock;
> +
> + /* device directory table root pointer and mode */
> + unsigned long ddtp;
> + unsigned ddt_mode;
> + bool ddtp_in_iomem;
> +
> + /* Connected end-points */
> + struct rb_root eps;
> + struct mutex eps_mutex;
> +};
> +
> +struct riscv_iommu_domain {
> + struct iommu_domain domain;
> +
> + struct list_head endpoints;
> + struct mutex lock;
> + struct riscv_iommu_device *iommu;
> +
> + unsigned mode; /* RIO_ATP_MODE_* enum */
> + unsigned pscid; /* RISC-V IOMMU PSCID */
> +
> + pgd_t *pgd_root; /* page table root pointer */
> +};
> +
> +/* Private dev_iommu_priv object, device-domain relationship. */
> +struct riscv_iommu_endpoint {
> + struct device *dev; /* platform or PCI endpoint device */
> + unsigned devid; /* PCI bus:device:function number */
> + unsigned domid; /* PCI domain number, segment */
> + struct rb_node node; /* device tracking node (lookup by devid) */
> + struct riscv_iommu_device *iommu; /* parent iommu device */
> +
> + struct mutex lock;
> + struct list_head domain; /* endpoint attached managed domain */
> +};
> +
> +/* Helper functions and macros */
> +
> +static inline u32 riscv_iommu_readl(struct riscv_iommu_device *iommu,
> + unsigned offset)
> +{
> + return readl_relaxed(iommu->reg + offset);
> +}
> +
> +static inline void riscv_iommu_writel(struct riscv_iommu_device *iommu,
> + unsigned offset, u32 val)
> +{
> + writel_relaxed(val, iommu->reg + offset);
> +}
> +
> +static inline u64 riscv_iommu_readq(struct riscv_iommu_device *iommu,
> + unsigned offset)
> +{
> + return readq_relaxed(iommu->reg + offset);
> +}
> +
> +static inline void riscv_iommu_writeq(struct riscv_iommu_device *iommu,
> + unsigned offset, u64 val)
> +{
> + writeq_relaxed(val, iommu->reg + offset);
> +}
> +
> +int riscv_iommu_init(struct riscv_iommu_device *iommu);
> +void riscv_iommu_remove(struct riscv_iommu_device *iommu);
> +
> +#endif
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
On Thu, Jul 27, 2023 at 7:42 PM Zong Li <[email protected]> wrote:
>
> On Thu, Jul 20, 2023 at 3:34 AM Tomasz Jeznach <[email protected]> wrote:
> >
> > +static int riscv_iommu_platform_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct riscv_iommu_device *iommu = NULL;
> > + struct resource *res = NULL;
> > + int ret = 0;
> > +
> > + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> > + if (!iommu)
> > + return -ENOMEM;
> > +
> > + iommu->dev = dev;
> > + dev_set_drvdata(dev, iommu);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (!res) {
> > + dev_err(dev, "could not find resource for register region\n");
> > + return -EINVAL;
> > + }
> > +
> > + iommu->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> > + if (IS_ERR(iommu->reg)) {
> > + ret = dev_err_probe(dev, PTR_ERR(iommu->reg),
> > + "could not map register region\n");
> > + goto fail;
> > + };
> > +
> > + iommu->reg_phys = res->start;
> > +
> > + ret = -ENODEV;
> > +
> > + /* Sanity check: Did we get the whole register space ? */
> > + if ((res->end - res->start + 1) < RISCV_IOMMU_REG_SIZE) {
> > + dev_err(dev, "device region smaller than register file (0x%llx)\n",
> > + res->end - res->start);
> > + goto fail;
> > + }
>
> Could we assume that DT should be responsible for specifying the right size?
>
This only to validate DT provided info and driver expected register
file size. Expectation is that DT will provide right size.
> > +static struct iommu_domain *riscv_iommu_domain_alloc(unsigned type)
> > +{
> > + struct riscv_iommu_domain *domain;
> > +
> > + if (type != IOMMU_DOMAIN_IDENTITY &&
> > + type != IOMMU_DOMAIN_BLOCKED)
> > + return NULL;
> > +
> > + domain = kzalloc(sizeof(*domain), GFP_KERNEL);
> > + if (!domain)
> > + return NULL;
> > +
> > + mutex_init(&domain->lock);
> > + INIT_LIST_HEAD(&domain->endpoints);
> > +
> > + domain->domain.ops = &riscv_iommu_domain_ops;
> > + domain->mode = RISCV_IOMMU_DC_FSC_MODE_BARE;
> > + domain->pscid = ida_alloc_range(&riscv_iommu_pscids, 1,
> > + RISCV_IOMMU_MAX_PSCID, GFP_KERNEL);
> > +
> > + printk("domain type %x alloc %u\n", type, domain->pscid);
> > +
>
> Could it uses pr_xxx instead of printk?
>
Absolutely, fixed here and elsewhere. Also, used dev_dbg wherever applicable.
> > +
> > +static int riscv_iommu_enable(struct riscv_iommu_device *iommu, unsigned requested_mode)
> > +{
> > + struct device *dev = iommu->dev;
> > + u64 ddtp = 0;
> > + u64 ddtp_paddr = 0;
> > + unsigned mode = requested_mode;
> > + unsigned mode_readback = 0;
> > +
> > + ddtp = riscv_iommu_get_ddtp(iommu);
> > + if (ddtp & RISCV_IOMMU_DDTP_BUSY)
> > + return -EBUSY;
> > +
> > + /* Disallow state transtion from xLVL to xLVL. */
> > + switch (FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp)) {
> > + case RISCV_IOMMU_DDTP_MODE_BARE:
> > + case RISCV_IOMMU_DDTP_MODE_OFF:
> > + break;
> > + default:
> > + if ((mode != RISCV_IOMMU_DDTP_MODE_BARE)
> > + && (mode != RISCV_IOMMU_DDTP_MODE_OFF))
> > + return -EINVAL;
> > + break;
> > + }
> > +
> > + retry:
>
> We need to consider the `iommu.passthrough` before we set up the mode
> in switch case, something like
>
This function is only to execute configuration and set device directory mode.
Handling global iommu.passthrough policy is implemented in
riscv_iommu_init() call (patch #7).
Best,
- Tomasz
On Wed, Aug 02, 2023 at 01:15:22PM -0700, Tomasz Jeznach wrote:
> On Thu, Jul 27, 2023 at 7:42 PM Zong Li <[email protected]> wrote:
> >
> > On Thu, Jul 20, 2023 at 3:34 AM Tomasz Jeznach <[email protected]> wrote:
> > >
> > > +static int riscv_iommu_platform_probe(struct platform_device *pdev)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + struct riscv_iommu_device *iommu = NULL;
> > > + struct resource *res = NULL;
> > > + int ret = 0;
> > > +
> > > + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> > > + if (!iommu)
> > > + return -ENOMEM;
> > > +
> > > + iommu->dev = dev;
> > > + dev_set_drvdata(dev, iommu);
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + if (!res) {
> > > + dev_err(dev, "could not find resource for register region\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + iommu->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> > > + if (IS_ERR(iommu->reg)) {
> > > + ret = dev_err_probe(dev, PTR_ERR(iommu->reg),
> > > + "could not map register region\n");
> > > + goto fail;
> > > + };
> > > +
> > > + iommu->reg_phys = res->start;
> > > +
> > > + ret = -ENODEV;
> > > +
> > > + /* Sanity check: Did we get the whole register space ? */
> > > + if ((res->end - res->start + 1) < RISCV_IOMMU_REG_SIZE) {
> > > + dev_err(dev, "device region smaller than register file (0x%llx)\n",
> > > + res->end - res->start);
> > > + goto fail;
> > > + }
> >
> > Could we assume that DT should be responsible for specifying the right size?
> >
>
> This only to validate DT provided info and driver expected register
> file size. Expectation is that DT will provide right size.
FWIW this check seems needless to me, it's not the kernels job to
validate the devicetree.
On Wed, Jul 19, 2023 at 12:33:45PM -0700, Tomasz Jeznach wrote:
> +static int riscv_iommu_domain_finalize(struct riscv_iommu_domain *domain,
> + struct riscv_iommu_device *iommu)
> +{
Do not introduce this finalize pattern into new drivers. We are trying
to get rid of it. I don't see anything here that suggest you need it.
Do all of this when you allocate the domain.
> + struct iommu_domain_geometry *geometry;
> +
> + /* Domain assigned to another iommu */
> + if (domain->iommu && domain->iommu != iommu)
> + return -EINVAL;
> + /* Domain already initialized */
> + else if (domain->iommu)
> + return 0;
These tests are not good, the domain should be able to be associated
with as many iommu instances as it likes.
> +static int riscv_iommu_attach_dev(struct iommu_domain *iommu_domain, struct device *dev)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> + struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
> + int ret;
> +
> + /* PSCID not valid */
> + if ((int)domain->pscid < 0)
> + return -ENOMEM;
> +
> + mutex_lock(&domain->lock);
> + mutex_lock(&ep->lock);
> +
> + if (!list_empty(&ep->domain)) {
> + dev_warn(dev, "endpoint already attached to a domain. dropping\n");
This is legitimate, it means the driver has to replace the domain, and
drivers have to implement this.
> +/*
> + * Common I/O MMU driver probe/teardown
> + */
> +
> +static const struct iommu_domain_ops riscv_iommu_domain_ops = {
> + .free = riscv_iommu_domain_free,
> + .attach_dev = riscv_iommu_attach_dev,
> + .map_pages = riscv_iommu_map_pages,
> + .unmap_pages = riscv_iommu_unmap_pages,
> + .iova_to_phys = riscv_iommu_iova_to_phys,
> + .iotlb_sync = riscv_iommu_iotlb_sync,
> + .iotlb_sync_map = riscv_iommu_iotlb_sync_map,
> + .flush_iotlb_all = riscv_iommu_flush_iotlb_all,
> +};
Please split the ops by domain type, eg identity, paging, sva, etc.
> +int riscv_iommu_init(struct riscv_iommu_device *iommu)
> +{
> + struct device *dev = iommu->dev;
> + u32 fctl = 0;
> + int ret;
> +
> + iommu->eps = RB_ROOT;
> +
> + fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL);
> +
> +#ifdef CONFIG_CPU_BIG_ENDIAN
> + if (!(cap & RISCV_IOMMU_CAP_END)) {
> + dev_err(dev, "IOMMU doesn't support Big Endian\n");
Why not?
> + return -EIO;
> + } else if (!(fctl & RISCV_IOMMU_FCTL_BE)) {
> + fctl |= FIELD_PREP(RISCV_IOMMU_FCTL_BE, 1);
> + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, fctl);
> + }
> +#endif
> +
> + /* Clear any pending interrupt flag. */
> + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_IPSR,
> + RISCV_IOMMU_IPSR_CIP |
> + RISCV_IOMMU_IPSR_FIP |
> + RISCV_IOMMU_IPSR_PMIP | RISCV_IOMMU_IPSR_PIP);
> + spin_lock_init(&iommu->cq_lock);
> + mutex_init(&iommu->eps_mutex);
> +
> + ret = riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_BARE);
> +
> + if (ret) {
> + dev_err(dev, "cannot enable iommu device (%d)\n", ret);
> + goto fail;
> + }
> +
> + ret = iommu_device_register(&iommu->iommu, &riscv_iommu_ops, dev);
> + if (ret) {
> + dev_err(dev, "cannot register iommu interface (%d)\n", ret);
> + iommu_device_sysfs_remove(&iommu->iommu);
> + goto fail;
> + }
The calls to iommu_device_sysfs_add() are missing, this is mandatory..
Jason
On Thu, Aug 3, 2023 at 4:15 AM Tomasz Jeznach <[email protected]> wrote:
>
> On Thu, Jul 27, 2023 at 7:42 PM Zong Li <[email protected]> wrote:
> >
> > On Thu, Jul 20, 2023 at 3:34 AM Tomasz Jeznach <[email protected]> wrote:
> > >
> > > +static int riscv_iommu_platform_probe(struct platform_device *pdev)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + struct riscv_iommu_device *iommu = NULL;
> > > + struct resource *res = NULL;
> > > + int ret = 0;
> > > +
> > > + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> > > + if (!iommu)
> > > + return -ENOMEM;
> > > +
> > > + iommu->dev = dev;
> > > + dev_set_drvdata(dev, iommu);
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + if (!res) {
> > > + dev_err(dev, "could not find resource for register region\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + iommu->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> > > + if (IS_ERR(iommu->reg)) {
> > > + ret = dev_err_probe(dev, PTR_ERR(iommu->reg),
> > > + "could not map register region\n");
> > > + goto fail;
> > > + };
> > > +
> > > + iommu->reg_phys = res->start;
> > > +
> > > + ret = -ENODEV;
> > > +
> > > + /* Sanity check: Did we get the whole register space ? */
> > > + if ((res->end - res->start + 1) < RISCV_IOMMU_REG_SIZE) {
> > > + dev_err(dev, "device region smaller than register file (0x%llx)\n",
> > > + res->end - res->start);
> > > + goto fail;
> > > + }
> >
> > Could we assume that DT should be responsible for specifying the right size?
> >
>
> This only to validate DT provided info and driver expected register
> file size. Expectation is that DT will provide right size.
>
>
> > > +static struct iommu_domain *riscv_iommu_domain_alloc(unsigned type)
> > > +{
> > > + struct riscv_iommu_domain *domain;
> > > +
> > > + if (type != IOMMU_DOMAIN_IDENTITY &&
> > > + type != IOMMU_DOMAIN_BLOCKED)
> > > + return NULL;
> > > +
> > > + domain = kzalloc(sizeof(*domain), GFP_KERNEL);
> > > + if (!domain)
> > > + return NULL;
> > > +
> > > + mutex_init(&domain->lock);
> > > + INIT_LIST_HEAD(&domain->endpoints);
> > > +
> > > + domain->domain.ops = &riscv_iommu_domain_ops;
> > > + domain->mode = RISCV_IOMMU_DC_FSC_MODE_BARE;
> > > + domain->pscid = ida_alloc_range(&riscv_iommu_pscids, 1,
> > > + RISCV_IOMMU_MAX_PSCID, GFP_KERNEL);
> > > +
> > > + printk("domain type %x alloc %u\n", type, domain->pscid);
> > > +
> >
> > Could it uses pr_xxx instead of printk?
> >
>
> Absolutely, fixed here and elsewhere. Also, used dev_dbg wherever applicable.
>
> > > +
> > > +static int riscv_iommu_enable(struct riscv_iommu_device *iommu, unsigned requested_mode)
> > > +{
> > > + struct device *dev = iommu->dev;
> > > + u64 ddtp = 0;
> > > + u64 ddtp_paddr = 0;
> > > + unsigned mode = requested_mode;
> > > + unsigned mode_readback = 0;
> > > +
> > > + ddtp = riscv_iommu_get_ddtp(iommu);
> > > + if (ddtp & RISCV_IOMMU_DDTP_BUSY)
> > > + return -EBUSY;
> > > +
> > > + /* Disallow state transtion from xLVL to xLVL. */
> > > + switch (FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp)) {
> > > + case RISCV_IOMMU_DDTP_MODE_BARE:
> > > + case RISCV_IOMMU_DDTP_MODE_OFF:
> > > + break;
> > > + default:
> > > + if ((mode != RISCV_IOMMU_DDTP_MODE_BARE)
> > > + && (mode != RISCV_IOMMU_DDTP_MODE_OFF))
> > > + return -EINVAL;
> > > + break;
> > > + }
> > > +
> > > + retry:
> >
> > We need to consider the `iommu.passthrough` before we set up the mode
> > in switch case, something like
> >
>
> This function is only to execute configuration and set device directory mode.
> Handling global iommu.passthrough policy is implemented in
> riscv_iommu_init() call (patch #7).
Thanks. I saw that in patch #7.
>
> Best,
> - Tomasz
On Thu, Jul 20, 2023 at 3:34 AM Tomasz Jeznach <[email protected]> wrote:
>
> The patch introduces skeleton IOMMU device driver implementation as defined
> by RISC-V IOMMU Architecture Specification, Version 1.0 [1], with minimal support
> for pass-through mapping, basic initialization and bindings for platform and PCIe
> hardware implementations.
>
> Series of patches following specification evolution has been reorganized to provide
> functional separation of implemented blocks, compliant with ratified specification.
>
> This and following patch series includes code contributed by: Nick Kossifidis
> <[email protected]> (iommu-platform device, number of specification clarification
> and bugfixes and readability improvements), Sebastien Boeuf <[email protected]> (page
> table creation, ATS/PGR flow).
>
> Complete history can be found at the maintainer's repository branch [2].
>
> Device driver enables RISC-V 32/64 support for memory translation for DMA capable
> PCI and platform devices, multilevel device directory table, process directory,
> shared virtual address support, wired and message signaled interrupt for translation
> I/O fault, page request interface and command processing.
>
> Matching RISCV-V IOMMU device emulation implementation is available for QEMU project,
> along with educational device extensions for PASID ATS/PRI support [3].
>
> References:
> - [1] https://github.com/riscv-non-isa/riscv-iommu
> - [2] https://github.com/tjeznach/linux/tree/tjeznach/riscv-iommu
> - [3] https://github.com/tjeznach/qemu/tree/tjeznach/riscv-iommu
>
> Co-developed-by: Nick Kossifidis <[email protected]>
> Signed-off-by: Nick Kossifidis <[email protected]>
> Co-developed-by: Sebastien Boeuf <[email protected]>
> Signed-off-by: Sebastien Boeuf <[email protected]>
> Signed-off-by: Tomasz Jeznach <[email protected]>
> ---
> drivers/iommu/Kconfig | 1 +
> drivers/iommu/Makefile | 2 +-
> drivers/iommu/riscv/Kconfig | 22 +
> drivers/iommu/riscv/Makefile | 1 +
> drivers/iommu/riscv/iommu-bits.h | 704 +++++++++++++++++++++++++++
> drivers/iommu/riscv/iommu-pci.c | 134 +++++
> drivers/iommu/riscv/iommu-platform.c | 94 ++++
> drivers/iommu/riscv/iommu.c | 660 +++++++++++++++++++++++++
> drivers/iommu/riscv/iommu.h | 115 +++++
> 9 files changed, 1732 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iommu/riscv/Kconfig
> create mode 100644 drivers/iommu/riscv/Makefile
> create mode 100644 drivers/iommu/riscv/iommu-bits.h
> create mode 100644 drivers/iommu/riscv/iommu-pci.c
> create mode 100644 drivers/iommu/riscv/iommu-platform.c
> create mode 100644 drivers/iommu/riscv/iommu.c
> create mode 100644 drivers/iommu/riscv/iommu.h
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 2b12b583ef4b..36fcc6fd5b4e 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -187,6 +187,7 @@ config MSM_IOMMU
> source "drivers/iommu/amd/Kconfig"
> source "drivers/iommu/intel/Kconfig"
> source "drivers/iommu/iommufd/Kconfig"
> +source "drivers/iommu/riscv/Kconfig"
>
> config IRQ_REMAP
> bool "Support for Interrupt Remapping"
> diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
> index 769e43d780ce..8f57110a9fb1 100644
> --- a/drivers/iommu/Makefile
> +++ b/drivers/iommu/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> -obj-y += amd/ intel/ arm/ iommufd/
> +obj-y += amd/ intel/ arm/ iommufd/ riscv/
> obj-$(CONFIG_IOMMU_API) += iommu.o
> obj-$(CONFIG_IOMMU_API) += iommu-traces.o
> obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
> diff --git a/drivers/iommu/riscv/Kconfig b/drivers/iommu/riscv/Kconfig
> new file mode 100644
> index 000000000000..01d4043849d4
> --- /dev/null
> +++ b/drivers/iommu/riscv/Kconfig
> @@ -0,0 +1,22 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# RISC-V IOMMU support
> +
> +config RISCV_IOMMU
> + bool "RISC-V IOMMU driver"
> + depends on RISCV
> + select IOMMU_API
> + select IOMMU_DMA
> + select IOMMU_SVA
> + select IOMMU_IOVA
> + select IOMMU_IO_PGTABLE
> + select IOASID
> + select PCI_MSI
> + select PCI_ATS
> + select PCI_PRI
> + select PCI_PASID
> + select MMU_NOTIFIER
> + help
> + Support for devices following RISC-V IOMMU specification.
> +
> + If unsure, say N here.
> +
> diff --git a/drivers/iommu/riscv/Makefile b/drivers/iommu/riscv/Makefile
> new file mode 100644
> index 000000000000..38730c11e4a8
> --- /dev/null
> +++ b/drivers/iommu/riscv/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_RISCV_IOMMU) += iommu.o iommu-pci.o iommu-platform.o
> \ No newline at end of file
> diff --git a/drivers/iommu/riscv/iommu-bits.h b/drivers/iommu/riscv/iommu-bits.h
> new file mode 100644
> index 000000000000..b2946793a73d
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-bits.h
> @@ -0,0 +1,704 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + * Copyright © 2023 RISC-V IOMMU Task Group
> + *
> + * RISC-V Ziommu - Register Layout and Data Structures.
> + *
> + * Based on the 'RISC-V IOMMU Architecture Specification', Version 1.0
> + * Published at https://github.com/riscv-non-isa/riscv-iommu
> + *
> + */
> +
> +#ifndef _RISCV_IOMMU_BITS_H_
> +#define _RISCV_IOMMU_BITS_H_
> +
> +#include <linux/types.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +
> +/*
> + * Chapter 5: Memory Mapped register interface
> + */
> +
> +/* Common field positions */
> +#define RISCV_IOMMU_PPN_FIELD GENMASK_ULL(53, 10)
> +#define RISCV_IOMMU_QUEUE_LOGSZ_FIELD GENMASK_ULL(4, 0)
> +#define RISCV_IOMMU_QUEUE_INDEX_FIELD GENMASK_ULL(31, 0)
> +#define RISCV_IOMMU_QUEUE_ENABLE BIT(0)
> +#define RISCV_IOMMU_QUEUE_INTR_ENABLE BIT(1)
> +#define RISCV_IOMMU_QUEUE_MEM_FAULT BIT(8)
> +#define RISCV_IOMMU_QUEUE_OVERFLOW BIT(9)
> +#define RISCV_IOMMU_QUEUE_ACTIVE BIT(16)
> +#define RISCV_IOMMU_QUEUE_BUSY BIT(17)
> +
> +#define RISCV_IOMMU_ATP_PPN_FIELD GENMASK_ULL(43, 0)
> +#define RISCV_IOMMU_ATP_MODE_FIELD GENMASK_ULL(63, 60)
> +
> +/* 5.3 IOMMU Capabilities (64bits) */
> +#define RISCV_IOMMU_REG_CAP 0x0000
> +#define RISCV_IOMMU_CAP_VERSION GENMASK_ULL(7, 0)
> +#define RISCV_IOMMU_CAP_S_SV32 BIT_ULL(8)
> +#define RISCV_IOMMU_CAP_S_SV39 BIT_ULL(9)
> +#define RISCV_IOMMU_CAP_S_SV48 BIT_ULL(10)
> +#define RISCV_IOMMU_CAP_S_SV57 BIT_ULL(11)
> +#define RISCV_IOMMU_CAP_SVPBMT BIT_ULL(15)
> +#define RISCV_IOMMU_CAP_G_SV32 BIT_ULL(16)
> +#define RISCV_IOMMU_CAP_G_SV39 BIT_ULL(17)
> +#define RISCV_IOMMU_CAP_G_SV48 BIT_ULL(18)
> +#define RISCV_IOMMU_CAP_G_SV57 BIT_ULL(19)
> +#define RISCV_IOMMU_CAP_MSI_FLAT BIT_ULL(22)
> +#define RISCV_IOMMU_CAP_MSI_MRIF BIT_ULL(23)
> +#define RISCV_IOMMU_CAP_AMO BIT_ULL(24)
> +#define RISCV_IOMMU_CAP_ATS BIT_ULL(25)
> +#define RISCV_IOMMU_CAP_T2GPA BIT_ULL(26)
> +#define RISCV_IOMMU_CAP_END BIT_ULL(27)
> +#define RISCV_IOMMU_CAP_IGS GENMASK_ULL(29, 28)
> +#define RISCV_IOMMU_CAP_HPM BIT_ULL(30)
> +#define RISCV_IOMMU_CAP_DBG BIT_ULL(31)
> +#define RISCV_IOMMU_CAP_PAS GENMASK_ULL(37, 32)
> +#define RISCV_IOMMU_CAP_PD8 BIT_ULL(38)
> +#define RISCV_IOMMU_CAP_PD17 BIT_ULL(39)
> +#define RISCV_IOMMU_CAP_PD20 BIT_ULL(40)
> +
> +#define RISCV_IOMMU_CAP_VERSION_VER_MASK 0xF0
> +#define RISCV_IOMMU_CAP_VERSION_REV_MASK 0x0F
> +
> +/**
> + * enum riscv_iommu_igs_settings - Interrupt Generation Support Settings
> + * @RISCV_IOMMU_CAP_IGS_MSI: I/O MMU supports only MSI generation
> + * @RISCV_IOMMU_CAP_IGS_WSI: I/O MMU supports only Wired-Signaled interrupt
> + * @RISCV_IOMMU_CAP_IGS_BOTH: I/O MMU supports both MSI and WSI generation
> + * @RISCV_IOMMU_CAP_IGS_RSRV: Reserved for standard use
> + */
> +enum riscv_iommu_igs_settings {
> + RISCV_IOMMU_CAP_IGS_MSI = 0,
> + RISCV_IOMMU_CAP_IGS_WSI = 1,
> + RISCV_IOMMU_CAP_IGS_BOTH = 2,
> + RISCV_IOMMU_CAP_IGS_RSRV = 3
> +};
> +
> +/* 5.4 Features control register (32bits) */
> +#define RISCV_IOMMU_REG_FCTL 0x0008
> +#define RISCV_IOMMU_FCTL_BE BIT(0)
> +#define RISCV_IOMMU_FCTL_WSI BIT(1)
> +#define RISCV_IOMMU_FCTL_GXL BIT(2)
> +
> +/* 5.5 Device-directory-table pointer (64bits) */
> +#define RISCV_IOMMU_REG_DDTP 0x0010
> +#define RISCV_IOMMU_DDTP_MODE GENMASK_ULL(3, 0)
> +#define RISCV_IOMMU_DDTP_BUSY BIT_ULL(4)
> +#define RISCV_IOMMU_DDTP_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/**
> + * enum riscv_iommu_ddtp_modes - I/O MMU translation modes
> + * @RISCV_IOMMU_DDTP_MODE_OFF: No inbound transactions allowed
> + * @RISCV_IOMMU_DDTP_MODE_BARE: Pass-through mode
> + * @RISCV_IOMMU_DDTP_MODE_1LVL: One-level DDT
> + * @RISCV_IOMMU_DDTP_MODE_2LVL: Two-level DDT
> + * @RISCV_IOMMU_DDTP_MODE_3LVL: Three-level DDT
> + */
> +enum riscv_iommu_ddtp_modes {
> + RISCV_IOMMU_DDTP_MODE_OFF = 0,
> + RISCV_IOMMU_DDTP_MODE_BARE = 1,
> + RISCV_IOMMU_DDTP_MODE_1LVL = 2,
> + RISCV_IOMMU_DDTP_MODE_2LVL = 3,
> + RISCV_IOMMU_DDTP_MODE_3LVL = 4,
> + RISCV_IOMMU_DDTP_MODE_MAX = 4
> +};
> +
> +/* 5.6 Command Queue Base (64bits) */
> +#define RISCV_IOMMU_REG_CQB 0x0018
> +#define RISCV_IOMMU_CQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
> +#define RISCV_IOMMU_CQB_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.7 Command Queue head (32bits) */
> +#define RISCV_IOMMU_REG_CQH 0x0020
> +#define RISCV_IOMMU_CQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.8 Command Queue tail (32bits) */
> +#define RISCV_IOMMU_REG_CQT 0x0024
> +#define RISCV_IOMMU_CQT_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.9 Fault Queue Base (64bits) */
> +#define RISCV_IOMMU_REG_FQB 0x0028
> +#define RISCV_IOMMU_FQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
> +#define RISCV_IOMMU_FQB_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.10 Fault Queue Head (32bits) */
> +#define RISCV_IOMMU_REG_FQH 0x0030
> +#define RISCV_IOMMU_FQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.11 Fault Queue tail (32bits) */
> +#define RISCV_IOMMU_REG_FQT 0x0034
> +#define RISCV_IOMMU_FQT_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.12 Page Request Queue base (64bits) */
> +#define RISCV_IOMMU_REG_PQB 0x0038
> +#define RISCV_IOMMU_PQB_ENTRIES RISCV_IOMMU_QUEUE_LOGSZ_FIELD
> +#define RISCV_IOMMU_PQB_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.13 Page Request Queue head (32bits) */
> +#define RISCV_IOMMU_REG_PQH 0x0040
> +#define RISCV_IOMMU_PQH_INDEX RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.14 Page Request Queue tail (32bits) */
> +#define RISCV_IOMMU_REG_PQT 0x0044
> +#define RISCV_IOMMU_PQT_INDEX_MASK RISCV_IOMMU_QUEUE_INDEX_FIELD
> +
> +/* 5.15 Command Queue CSR (32bits) */
> +#define RISCV_IOMMU_REG_CQCSR 0x0048
> +#define RISCV_IOMMU_CQCSR_CQEN RISCV_IOMMU_QUEUE_ENABLE
> +#define RISCV_IOMMU_CQCSR_CIE RISCV_IOMMU_QUEUE_INTR_ENABLE
> +#define RISCV_IOMMU_CQCSR_CQMF RISCV_IOMMU_QUEUE_MEM_FAULT
> +#define RISCV_IOMMU_CQCSR_CMD_TO BIT(9)
> +#define RISCV_IOMMU_CQCSR_CMD_ILL BIT(10)
> +#define RISCV_IOMMU_CQCSR_FENCE_W_IP BIT(11)
> +#define RISCV_IOMMU_CQCSR_CQON RISCV_IOMMU_QUEUE_ACTIVE
> +#define RISCV_IOMMU_CQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
> +
> +/* 5.16 Fault Queue CSR (32bits) */
> +#define RISCV_IOMMU_REG_FQCSR 0x004C
> +#define RISCV_IOMMU_FQCSR_FQEN RISCV_IOMMU_QUEUE_ENABLE
> +#define RISCV_IOMMU_FQCSR_FIE RISCV_IOMMU_QUEUE_INTR_ENABLE
> +#define RISCV_IOMMU_FQCSR_FQMF RISCV_IOMMU_QUEUE_MEM_FAULT
> +#define RISCV_IOMMU_FQCSR_FQOF RISCV_IOMMU_QUEUE_OVERFLOW
> +#define RISCV_IOMMU_FQCSR_FQON RISCV_IOMMU_QUEUE_ACTIVE
> +#define RISCV_IOMMU_FQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
> +
> +/* 5.17 Page Request Queue CSR (32bits) */
> +#define RISCV_IOMMU_REG_PQCSR 0x0050
> +#define RISCV_IOMMU_PQCSR_PQEN RISCV_IOMMU_QUEUE_ENABLE
> +#define RISCV_IOMMU_PQCSR_PIE RISCV_IOMMU_QUEUE_INTR_ENABLE
> +#define RISCV_IOMMU_PQCSR_PQMF RISCV_IOMMU_QUEUE_MEM_FAULT
> +#define RISCV_IOMMU_PQCSR_PQOF RISCV_IOMMU_QUEUE_OVERFLOW
> +#define RISCV_IOMMU_PQCSR_PQON RISCV_IOMMU_QUEUE_ACTIVE
> +#define RISCV_IOMMU_PQCSR_BUSY RISCV_IOMMU_QUEUE_BUSY
> +
> +/* 5.18 Interrupt Pending Status (32bits) */
> +#define RISCV_IOMMU_REG_IPSR 0x0054
> +
> +#define RISCV_IOMMU_INTR_CQ 0
> +#define RISCV_IOMMU_INTR_FQ 1
> +#define RISCV_IOMMU_INTR_PM 2
> +#define RISCV_IOMMU_INTR_PQ 3
> +#define RISCV_IOMMU_INTR_COUNT 4
> +
> +#define RISCV_IOMMU_IPSR_CIP BIT(RISCV_IOMMU_INTR_CQ)
> +#define RISCV_IOMMU_IPSR_FIP BIT(RISCV_IOMMU_INTR_FQ)
> +#define RISCV_IOMMU_IPSR_PMIP BIT(RISCV_IOMMU_INTR_PM)
> +#define RISCV_IOMMU_IPSR_PIP BIT(RISCV_IOMMU_INTR_PQ)
> +
> +/* 5.19 Performance monitoring counter overflow status (32bits) */
> +#define RISCV_IOMMU_REG_IOCOUNTOVF 0x0058
> +#define RISCV_IOMMU_IOCOUNTOVF_CY BIT(0)
> +#define RISCV_IOMMU_IOCOUNTOVF_HPM GENMASK_ULL(31, 1)
> +
> +/* 5.20 Performance monitoring counter inhibits (32bits) */
> +#define RISCV_IOMMU_REG_IOCOUNTINH 0x005C
> +#define RISCV_IOMMU_IOCOUNTINH_CY BIT(0)
> +#define RISCV_IOMMU_IOCOUNTINH_HPM GENMASK(31, 1)
> +
> +/* 5.21 Performance monitoring cycles counter (64bits) */
> +#define RISCV_IOMMU_REG_IOHPMCYCLES 0x0060
> +#define RISCV_IOMMU_IOHPMCYCLES_COUNTER GENMASK_ULL(62, 0)
> +#define RISCV_IOMMU_IOHPMCYCLES_OVF BIT_ULL(63)
> +
> +/* 5.22 Performance monitoring event counters (31 * 64bits) */
> +#define RISCV_IOMMU_REG_IOHPMCTR_BASE 0x0068
> +#define RISCV_IOMMU_REG_IOHPMCTR(_n) (RISCV_IOMMU_REG_IOHPMCTR_BASE + (_n * 0x8))
> +
> +/* 5.23 Performance monitoring event selectors (31 * 64bits) */
> +#define RISCV_IOMMU_REG_IOHPMEVT_BASE 0x0160
> +#define RISCV_IOMMU_REG_IOHPMEVT(_n) (RISCV_IOMMU_REG_IOHPMEVT_BASE + (_n * 0x8))
> +#define RISCV_IOMMU_IOHPMEVT_EVENT_ID GENMASK_ULL(14, 0)
> +#define RISCV_IOMMU_IOHPMEVT_DMASK BIT_ULL(15)
> +#define RISCV_IOMMU_IOHPMEVT_PID_PSCID GENMASK_ULL(35, 16)
> +#define RISCV_IOMMU_IOHPMEVT_DID_GSCID GENMASK_ULL(59, 36)
> +#define RISCV_IOMMU_IOHPMEVT_PV_PSCV BIT_ULL(60)
> +#define RISCV_IOMMU_IOHPMEVT_DV_GSCV BIT_ULL(61)
> +#define RISCV_IOMMU_IOHPMEVT_IDT BIT_ULL(62)
> +#define RISCV_IOMMU_IOHPMEVT_OF BIT_ULL(63)
> +
> +/**
> + * enum riscv_iommu_hpmevent_id - Performance-monitoring event identifier
> + *
> + * @RISCV_IOMMU_HPMEVENT_INVALID: Invalid event, do not count
> + * @RISCV_IOMMU_HPMEVENT_URQ: Untranslated requests
> + * @RISCV_IOMMU_HPMEVENT_TRQ: Translated requests
> + * @RISCV_IOMMU_HPMEVENT_ATS_RQ: ATS translation requests
> + * @RISCV_IOMMU_HPMEVENT_TLB_MISS: TLB misses
> + * @RISCV_IOMMU_HPMEVENT_DD_WALK: Device directory walks
> + * @RISCV_IOMMU_HPMEVENT_PD_WALK: Process directory walks
> + * @RISCV_IOMMU_HPMEVENT_S_VS_WALKS: S/VS-Stage page table walks
> + * @RISCV_IOMMU_HPMEVENT_G_WALKS: G-Stage page table walks
> + * @RISCV_IOMMU_HPMEVENT_MAX: Value to denote maximum Event IDs
> + */
> +enum riscv_iommu_hpmevent_id {
> + RISCV_IOMMU_HPMEVENT_INVALID = 0,
> + RISCV_IOMMU_HPMEVENT_URQ = 1,
> + RISCV_IOMMU_HPMEVENT_TRQ = 2,
> + RISCV_IOMMU_HPMEVENT_ATS_RQ = 3,
> + RISCV_IOMMU_HPMEVENT_TLB_MISS = 4,
> + RISCV_IOMMU_HPMEVENT_DD_WALK = 5,
> + RISCV_IOMMU_HPMEVENT_PD_WALK = 6,
> + RISCV_IOMMU_HPMEVENT_S_VS_WALKS = 7,
> + RISCV_IOMMU_HPMEVENT_G_WALKS = 8,
> + RISCV_IOMMU_HPMEVENT_MAX = 9
> +};
> +
> +/* 5.24 Translation request IOVA (64bits) */
> +#define RISCV_IOMMU_REG_TR_REQ_IOVA 0x0258
> +#define RISCV_IOMMU_TR_REQ_IOVA_VPN GENMASK_ULL(63, 12)
> +
> +/* 5.25 Translation request control (64bits) */
> +#define RISCV_IOMMU_REG_TR_REQ_CTL 0x0260
> +#define RISCV_IOMMU_TR_REQ_CTL_GO_BUSY BIT_ULL(0)
> +#define RISCV_IOMMU_TR_REQ_CTL_PRIV BIT_ULL(1)
> +#define RISCV_IOMMU_TR_REQ_CTL_EXE BIT_ULL(2)
> +#define RISCV_IOMMU_TR_REQ_CTL_NW BIT_ULL(3)
> +#define RISCV_IOMMU_TR_REQ_CTL_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_TR_REQ_CTL_PV BIT_ULL(32)
> +#define RISCV_IOMMU_TR_REQ_CTL_DID GENMASK_ULL(63, 40)
> +
> +/* 5.26 Translation request response (64bits) */
> +#define RISCV_IOMMU_REG_TR_RESPONSE 0x0268
> +#define RISCV_IOMMU_TR_RESPONSE_FAULT BIT_ULL(0)
> +#define RISCV_IOMMU_TR_RESPONSE_PBMT GENMASK_ULL(8, 7)
> +#define RISCV_IOMMU_TR_RESPONSE_SZ BIT_ULL(9)
> +#define RISCV_IOMMU_TR_RESPONSE_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/* 5.27 Interrupt cause to vector (64bits) */
> +#define RISCV_IOMMU_REG_IVEC 0x02F8
> +#define RISCV_IOMMU_IVEC_CIV GENMASK_ULL(3, 0)
> +#define RISCV_IOMMU_IVEC_FIV GENMASK_ULL(7, 4)
> +#define RISCV_IOMMU_IVEC_PMIV GENMASK_ULL(11, 8)
> +#define RISCV_IOMMU_IVEC_PIV GENMASK_ULL(15,12)
> +
> +/* 5.28 MSI Configuration table (32 * 64bits) */
> +#define RISCV_IOMMU_REG_MSI_CONFIG 0x0300
> +#define RISCV_IOMMU_REG_MSI_ADDR(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10))
> +#define RISCV_IOMMU_MSI_ADDR GENMASK_ULL(55, 2)
> +#define RISCV_IOMMU_REG_MSI_DATA(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10) + 0x08)
> +#define RISCV_IOMMU_MSI_DATA GENMASK_ULL(31, 0)
> +#define RISCV_IOMMU_REG_MSI_VEC_CTL(_n) (RISCV_IOMMU_REG_MSI_CONFIG + (_n * 0x10) + 0x0C)
> +#define RISCV_IOMMU_MSI_VEC_CTL_M BIT_ULL(0)
> +
> +#define RISCV_IOMMU_REG_SIZE 0x1000
> +
> +/*
> + * Chapter 2: Data structures
> + */
> +
> +/*
> + * Device Directory Table macros for non-leaf nodes
> + */
> +#define RISCV_IOMMU_DDTE_VALID BIT_ULL(0)
> +#define RISCV_IOMMU_DDTE_PPN RISCV_IOMMU_PPN_FIELD
> +
> +/**
> + * struct riscv_iommu_dc - Device Context
> + * @tc: Translation Control
> + * @iohgatp: I/O Hypervisor guest address translation and protection
> + * (Second stage context)
> + * @ta: Translation Attributes
> + * @fsc: First stage context
> + * @msiptpt: MSI page table pointer
> + * @msi_addr_mask: MSI address mask
> + * @msi_addr_pattern: MSI address pattern
> + *
> + * This structure is used for leaf nodes on the Device Directory Table,
> + * in case RISCV_IOMMU_CAP_MSI_FLAT is not set, the bottom 4 fields are
> + * not present and are skipped with pointer arithmetic to avoid
> + * casting, check out riscv_iommu_get_dc().
> + * See section 2.1 for more details
> + */
> +struct riscv_iommu_dc {
> + u64 tc;
> + u64 iohgatp;
> + u64 ta;
> + u64 fsc;
> + u64 msiptp;
> + u64 msi_addr_mask;
> + u64 msi_addr_pattern;
> + u64 _reserved;
> +};
> +
> +/* Translation control fields */
> +#define RISCV_IOMMU_DC_TC_V BIT_ULL(0)
> +#define RISCV_IOMMU_DC_TC_EN_ATS BIT_ULL(1)
> +#define RISCV_IOMMU_DC_TC_EN_PRI BIT_ULL(2)
> +#define RISCV_IOMMU_DC_TC_T2GPA BIT_ULL(3)
> +#define RISCV_IOMMU_DC_TC_DTF BIT_ULL(4)
> +#define RISCV_IOMMU_DC_TC_PDTV BIT_ULL(5)
> +#define RISCV_IOMMU_DC_TC_PRPR BIT_ULL(6)
> +#define RISCV_IOMMU_DC_TC_GADE BIT_ULL(7)
> +#define RISCV_IOMMU_DC_TC_SADE BIT_ULL(8)
> +#define RISCV_IOMMU_DC_TC_DPE BIT_ULL(9)
> +#define RISCV_IOMMU_DC_TC_SBE BIT_ULL(10)
> +#define RISCV_IOMMU_DC_TC_SXL BIT_ULL(11)
> +
> +/* Second-stage (aka G-stage) context fields */
> +#define RISCV_IOMMU_DC_IOHGATP_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_DC_IOHGATP_GSCID GENMASK_ULL(59, 44)
> +#define RISCV_IOMMU_DC_IOHGATP_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +
> +/**
> + * enum riscv_iommu_dc_iohgatp_modes - Guest address translation/protection modes
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_BARE: No translation/protection
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV32X4: Sv32x4 (2-bit extension of Sv32), when fctl.GXL == 1
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV39X4: Sv39x4 (2-bit extension of Sv39), when fctl.GXL == 0
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV48X4: Sv48x4 (2-bit extension of Sv48), when fctl.GXL == 0
> + * @RISCV_IOMMU_DC_IOHGATP_MODE_SV57X4: Sv57x4 (2-bit extension of Sv57), when fctl.GXL == 0
> + */
> +enum riscv_iommu_dc_iohgatp_modes {
> + RISCV_IOMMU_DC_IOHGATP_MODE_BARE = 0,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV32X4 = 8,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV39X4 = 8,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV48X4 = 9,
> + RISCV_IOMMU_DC_IOHGATP_MODE_SV57X4 = 10
> +};
> +
> +/* Translation attributes fields */
> +#define RISCV_IOMMU_DC_TA_PSCID GENMASK_ULL(31,12)
> +
> +/* First-stage context fields */
> +#define RISCV_IOMMU_DC_FSC_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_DC_FSC_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +
> +/**
> + * enum riscv_iommu_dc_fsc_atp_modes - First stage address translation/protection modes
> + * @RISCV_IOMMU_DC_FSC_MODE_BARE: No translation/protection
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32: Sv32, when dc.tc.SXL == 1
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV39: Sv39, when dc.tc.SXL == 0
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV48: Sv48, when dc.tc.SXL == 0
> + * @RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV57: Sv57, when dc.tc.SXL == 0
> + * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8: 1lvl PDT, 8bit process ids
> + * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD17: 2lvl PDT, 17bit process ids
> + * @RISCV_IOMMU_DC_FSC_PDTP_MODE_PD20: 3lvl PDT, 20bit process ids
> + *
> + * FSC holds IOSATP when RISCV_IOMMU_DC_TC_PDTV is 0 and PDTP otherwise.
> + * IOSATP controls the first stage address translation (same as the satp register on
> + * the RISC-V MMU), and PDTP holds the process directory table, used to select a
> + * first stage page table based on a process id (for devices that support multiple
> + * process ids).
> + */
> +enum riscv_iommu_dc_fsc_atp_modes {
> + RISCV_IOMMU_DC_FSC_MODE_BARE = 0,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV32 = 8,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV39 = 8,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV48 = 9,
> + RISCV_IOMMU_DC_FSC_IOSATP_MODE_SV57 = 10,
> + RISCV_IOMMU_DC_FSC_PDTP_MODE_PD8 = 1,
> + RISCV_IOMMU_DC_FSC_PDTP_MODE_PD17 = 2,
> + RISCV_IOMMU_DC_FSC_PDTP_MODE_PD20 = 3
> +};
> +
> +/* MSI page table pointer */
> +#define RISCV_IOMMU_DC_MSIPTP_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_DC_MSIPTP_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +#define RISCV_IOMMU_DC_MSIPTP_MODE_OFF 0
> +#define RISCV_IOMMU_DC_MSIPTP_MODE_FLAT 1
> +
> +/* MSI address mask */
> +#define RISCV_IOMMU_DC_MSI_ADDR_MASK GENMASK_ULL(51, 0)
> +
> +/* MSI address pattern */
> +#define RISCV_IOMMU_DC_MSI_PATTERN GENMASK_ULL(51, 0)
> +
> +/**
> + * struct riscv_iommu_pc - Process Context
> + * @ta: Translation Attributes
> + * @fsc: First stage context
> + *
> + * This structure is used for leaf nodes on the Process Directory Table
> + * See section 2.3 for more details
> + */
> +struct riscv_iommu_pc {
> + u64 ta;
> + u64 fsc;
> +};
> +
> +/* Translation attributes fields */
> +#define RISCV_IOMMU_PC_TA_V BIT_ULL(0)
> +#define RISCV_IOMMU_PC_TA_ENS BIT_ULL(1)
> +#define RISCV_IOMMU_PC_TA_SUM BIT_ULL(2)
> +#define RISCV_IOMMU_PC_TA_PSCID GENMASK_ULL(31, 12)
> +
> +/* First stage context fields */
> +#define RISCV_IOMMU_PC_FSC_PPN RISCV_IOMMU_ATP_PPN_FIELD
> +#define RISCV_IOMMU_PC_FSC_MODE RISCV_IOMMU_ATP_MODE_FIELD
> +
> +/*
> + * Chapter 3: In-memory queue interface
> + */
> +
> +/**
> + * struct riscv_iommu_cmd - Generic I/O MMU command structure
> + * @dword0: Includes the opcode and the function identifier
> + * @dword1: Opcode specific data
> + *
> + * The commands are interpreted as two 64bit fields, where the first
> + * 7bits of the first field are the opcode which also defines the
> + * command's format, followed by a 3bit field that specifies the
> + * function invoked by that command, and the rest is opcode-specific.
> + * This is a generic struct which will be populated differently
> + * according to each command. For more infos on the commands and
> + * the command queue check section 3.1.
> + */
> +struct riscv_iommu_command {
> + u64 dword0;
> + u64 dword1;
> +};
> +
> +/* Fields on dword0, common for all commands */
> +#define RISCV_IOMMU_CMD_OPCODE GENMASK_ULL(6, 0)
> +#define RISCV_IOMMU_CMD_FUNC GENMASK_ULL(9, 7)
> +
> +/* 3.1.1 I/O MMU Page-table cache invalidation */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_IOTINVAL_OPCODE 1
> +#define RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA 0
> +#define RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA 1
> +#define RISCV_IOMMU_CMD_IOTINVAL_AV BIT_ULL(10)
> +#define RISCV_IOMMU_CMD_IOTINVAL_PSCID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_CMD_IOTINVAL_PSCV BIT_ULL(32)
> +#define RISCV_IOMMU_CMD_IOTINVAL_GV BIT_ULL(33)
> +#define RISCV_IOMMU_CMD_IOTINVAL_GSCID GENMASK_ULL(59, 44)
> +/* dword1 is the address, 4K-alligned and shifted to the right by
> + * two bits. */
> +
> +/* 3.1.2 I/O MMU Command Queue Fences */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_IOFENCE_OPCODE 2
> +#define RISCV_IOMMU_CMD_IOFENCE_FUNC_C 0
> +#define RISCV_IOMMU_CMD_IOFENCE_AV BIT_ULL(10)
> +#define RISCV_IOMMU_CMD_IOFENCE_WSI BIT_ULL(11)
> +#define RISCV_IOMMU_CMD_IOFENCE_PR BIT_ULL(12)
> +#define RISCV_IOMMU_CMD_IOFENCE_PW BIT_ULL(13)
> +#define RISCV_IOMMU_CMD_IOFENCE_DATA GENMASK_ULL(63, 32)
> +/* dword1 is the address, word-size alligned and shifted to the
> + * right by two bits. */
> +
> +/* 3.1.3 I/O MMU Directory cache invalidation */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_IODIR_OPCODE 3
> +#define RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_DDT 0
> +#define RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_PDT 1
> +#define RISCV_IOMMU_CMD_IODIR_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_CMD_IODIR_DV BIT_ULL(33)
> +#define RISCV_IOMMU_CMD_IODIR_DID GENMASK_ULL(63, 40)
> +/* dword1 is reserved for standard use */
> +
> +/* 3.1.4 I/O MMU PCIe ATS */
> +/* Fields on dword0 */
> +#define RISCV_IOMMU_CMD_ATS_OPCODE 4
> +#define RISCV_IOMMU_CMD_ATS_FUNC_INVAL 0
> +#define RISCV_IOMMU_CMD_ATS_FUNC_PRGR 1
> +#define RISCV_IOMMU_CMD_ATS_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_CMD_ATS_PV BIT_ULL(32)
> +#define RISCV_IOMMU_CMD_ATS_DSV BIT_ULL(33)
> +#define RISCV_IOMMU_CMD_ATS_RID GENMASK_ULL(55, 40)
> +#define RISCV_IOMMU_CMD_ATS_DSEG GENMASK_ULL(63, 56)
> +/* dword1 is the ATS payload, two different payload types for INVAL and PRGR */
> +
> +/* ATS.INVAL payload*/
> +#define RISCV_IOMMU_CMD_ATS_INVAL_G BIT_ULL(0)
> +/* Bits 1 - 10 are zeroed */
> +#define RISCV_IOMMU_CMD_ATS_INVAL_S BIT_ULL(11)
> +#define RISCV_IOMMU_CMD_ATS_INVAL_UADDR GENMASK_ULL(63, 12)
> +
> +/* ATS.PRGR payload */
> +/* Bits 0 - 31 are zeroed */
> +#define RISCV_IOMMU_CMD_ATS_PRGR_PRG_INDEX GENMASK_ULL(40, 32)
> +/* Bits 41 - 43 are zeroed */
> +#define RISCV_IOMMU_CMD_ATS_PRGR_RESP_CODE GENMASK_ULL(47, 44)
> +#define RISCV_IOMMU_CMD_ATS_PRGR_DST_ID GENMASK_ULL(63, 48)
> +
> +/**
> + * struct riscv_iommu_fq_record - Fault/Event Queue Record
> + * @hdr: Header, includes fault/event cause, PID/DID, transaction type etc
> + * @_reserved: Low 32bits for custom use, high 32bits for standard use
> + * @iotval: Transaction-type/cause specific format
> + * @iotval2: Cause specific format
> + *
> + * The fault/event queue reports events and failures raised when
> + * processing transactions. Each record is a 32byte structure where
> + * the first dword has a fixed format for providing generic infos
> + * regarding the fault/event, and two more dwords are there for
> + * fault/event-specific information. For more details see section
> + * 3.2.
> + */
> +struct riscv_iommu_fq_record {
> + u64 hdr;
> + u64 _reserved;
> + u64 iotval;
> + u64 iotval2;
> +};
> +
> +/* Fields on header */
> +#define RISCV_IOMMU_FQ_HDR_CAUSE GENMASK_ULL(11, 0)
> +#define RISCV_IOMMU_FQ_HDR_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_FQ_HDR_PV BIT_ULL(32)
> +#define RISCV_IOMMU_FQ_HDR_PRIV BIT_ULL(33)
> +#define RISCV_IOMMU_FQ_HDR_TTYPE GENMASK_ULL(39, 34)
> +#define RISCV_IOMMU_FQ_HDR_DID GENMASK_ULL(63, 40)
> +
> +/**
> + * enum riscv_iommu_fq_causes - Fault/event cause values
> + * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT: Instruction access fault
> + * @RISCV_IOMMU_FQ_CAUSE_RD_ADDR_MISALIGNED: Read address misaligned
> + * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT: Read load fault
> + * @RISCV_IOMMU_FQ_CAUSE_WR_ADDR_MISALIGNED: Write/AMO address misaligned
> + * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT: Write/AMO access fault
> + * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT_S: Instruction page fault
> + * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S: Read page fault
> + * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S: Write/AMO page fault
> + * @RISCV_IOMMU_FQ_CAUSE_INST_FAULT_VS: Instruction guest page fault
> + * @RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS: Read guest page fault
> + * @RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS: Write/AMO guest page fault
> + * @RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED: All inbound transactions disallowed
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_LOAD_FAULT: DDT entry load access fault
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_INVALID: DDT entry invalid
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_MISCONFIGURED: DDT entry misconfigured
> + * @RISCV_IOMMU_FQ_CAUSE_TTYPE_BLOCKED: Transaction type disallowed
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_LOAD_FAULT: MSI PTE load access fault
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_INVALID: MSI PTE invalid
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_MISCONFIGURED: MSI PTE misconfigured
> + * @RISCV_IOMMU_FQ_CAUSE_MRIF_FAULT: MRIF access fault
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_LOAD_FAULT: PDT entry load access fault
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_INVALID: PDT entry invalid
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_MISCONFIGURED: PDT entry misconfigured
> + * @RISCV_IOMMU_FQ_CAUSE_DDT_CORRUPTED: DDT data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_PDT_CORRUPTED: PDT data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_PT_CORRUPTED: MSI page table data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_MRIF_CORRUIPTED: MRIF data corruption
> + * @RISCV_IOMMU_FQ_CAUSE_INTERNAL_DP_ERROR: Internal data path error
> + * @RISCV_IOMMU_FQ_CAUSE_MSI_WR_FAULT: IOMMU MSI write access fault
> + * @RISCV_IOMMU_FQ_CAUSE_PT_CORRUPTED: First/second stage page table data corruption
> + *
> + * Values are on table 11 of the spec, encodings 275 - 2047 are reserved for standard
> + * use, and 2048 - 4095 for custom use.
> + */
> +enum riscv_iommu_fq_causes {
> + RISCV_IOMMU_FQ_CAUSE_INST_FAULT = 1,
> + RISCV_IOMMU_FQ_CAUSE_RD_ADDR_MISALIGNED = 4,
> + RISCV_IOMMU_FQ_CAUSE_RD_FAULT = 5,
> + RISCV_IOMMU_FQ_CAUSE_WR_ADDR_MISALIGNED = 6,
> + RISCV_IOMMU_FQ_CAUSE_WR_FAULT = 7,
> + RISCV_IOMMU_FQ_CAUSE_INST_FAULT_S = 12,
> + RISCV_IOMMU_FQ_CAUSE_RD_FAULT_S = 13,
> + RISCV_IOMMU_FQ_CAUSE_WR_FAULT_S = 15,
> + RISCV_IOMMU_FQ_CAUSE_INST_FAULT_VS = 20,
> + RISCV_IOMMU_FQ_CAUSE_RD_FAULT_VS = 21,
> + RISCV_IOMMU_FQ_CAUSE_WR_FAULT_VS = 23,
> + RISCV_IOMMU_FQ_CAUSE_DMA_DISABLED = 256,
> + RISCV_IOMMU_FQ_CAUSE_DDT_LOAD_FAULT = 257,
> + RISCV_IOMMU_FQ_CAUSE_DDT_INVALID = 258,
> + RISCV_IOMMU_FQ_CAUSE_DDT_MISCONFIGURED = 259,
> + RISCV_IOMMU_FQ_CAUSE_TTYPE_BLOCKED = 260,
> + RISCV_IOMMU_FQ_CAUSE_MSI_LOAD_FAULT = 261,
> + RISCV_IOMMU_FQ_CAUSE_MSI_INVALID = 262,
> + RISCV_IOMMU_FQ_CAUSE_MSI_MISCONFIGURED = 263,
> + RISCV_IOMMU_FQ_CAUSE_MRIF_FAULT = 264,
> + RISCV_IOMMU_FQ_CAUSE_PDT_LOAD_FAULT = 265,
> + RISCV_IOMMU_FQ_CAUSE_PDT_INVALID = 266,
> + RISCV_IOMMU_FQ_CAUSE_PDT_MISCONFIGURED = 267,
> + RISCV_IOMMU_FQ_CAUSE_DDT_CORRUPTED = 268,
> + RISCV_IOMMU_FQ_CAUSE_PDT_CORRUPTED = 269,
> + RISCV_IOMMU_FQ_CAUSE_MSI_PT_CORRUPTED = 270,
> + RISCV_IOMMU_FQ_CAUSE_MRIF_CORRUIPTED = 271,
> + RISCV_IOMMU_FQ_CAUSE_INTERNAL_DP_ERROR = 272,
> + RISCV_IOMMU_FQ_CAUSE_MSI_WR_FAULT = 273,
> + RISCV_IOMMU_FQ_CAUSE_PT_CORRUPTED = 274
> +};
> +
> +/**
> + * enum riscv_iommu_fq_ttypes: Fault/event transaction types
> + * @RISCV_IOMMU_FQ_TTYPE_NONE: None. Fault not caused by an inbound transaction.
> + * @RISCV_IOMMU_FQ_TTYPE_UADDR_INST_FETCH: Instruction fetch from untranslated address
> + * @RISCV_IOMMU_FQ_TTYPE_UADDR_RD: Read from untranslated address
> + * @RISCV_IOMMU_FQ_TTYPE_UADDR_WR: Write/AMO to untranslated address
> + * @RISCV_IOMMU_FQ_TTYPE_TADDR_INST_FETCH: Instruction fetch from translated address
> + * @RISCV_IOMMU_FQ_TTYPE_TADDR_RD: Read from translated address
> + * @RISCV_IOMMU_FQ_TTYPE_TADDR_WR: Write/AMO to translated address
> + * @RISCV_IOMMU_FQ_TTYPE_PCIE_ATS_REQ: PCIe ATS translation request
> + * @RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ: PCIe message request
> + *
> + * Values are on table 12 of the spec, type 4 and 10 - 31 are reserved for standard use
> + * and 31 - 63 for custom use.
> + */
> +enum riscv_iommu_fq_ttypes {
> + RISCV_IOMMU_FQ_TTYPE_NONE = 0,
> + RISCV_IOMMU_FQ_TTYPE_UADDR_INST_FETCH = 1,
> + RISCV_IOMMU_FQ_TTYPE_UADDR_RD = 2,
> + RISCV_IOMMU_FQ_TTYPE_UADDR_WR = 3,
> + RISCV_IOMMU_FQ_TTYPE_TADDR_INST_FETCH = 5,
> + RISCV_IOMMU_FQ_TTYPE_TADDR_RD = 6,
> + RISCV_IOMMU_FQ_TTYPE_TADDR_WR = 7,
> + RISCV_IOMMU_FQ_TTYPE_PCIE_ATS_REQ = 8,
> + RISCV_IOMMU_FW_TTYPE_PCIE_MSG_REQ = 9,
> +};
> +
> +/**
> + * struct riscv_iommu_pq_record - PCIe Page Request record
> + * @hdr: Header, includes PID, DID etc
> + * @payload: Holds the page address, request group and permission bits
> + *
> + * For more infos on the PCIe Page Request queue see chapter 3.3.
> + */
> +struct riscv_iommu_pq_record {
> + u64 hdr;
> + u64 payload;
> +};
> +
> +/* Header fields */
> +#define RISCV_IOMMU_PREQ_HDR_PID GENMASK_ULL(31, 12)
> +#define RISCV_IOMMU_PREQ_HDR_PV BIT_ULL(32)
> +#define RISCV_IOMMU_PREQ_HDR_PRIV BIT_ULL(33)
> +#define RISCV_IOMMU_PREQ_HDR_EXEC BIT_ULL(34)
> +#define RISCV_IOMMU_PREQ_HDR_DID GENMASK_ULL(63, 40)
> +
> +/* Payload fields */
> +#define RISCV_IOMMU_PREQ_PAYLOAD_R BIT_ULL(0)
> +#define RISCV_IOMMU_PREQ_PAYLOAD_W BIT_ULL(1)
> +#define RISCV_IOMMU_PREQ_PAYLOAD_L BIT_ULL(2)
> +#define RISCV_IOMMU_PREQ_PAYLOAD_M GENMASK_ULL(2, 0) /* Mask of RWL for convenience */
> +#define RISCV_IOMMU_PREQ_PRG_INDEX GENMASK_ULL(11, 3)
> +#define RISCV_IOMMU_PREQ_UADDR GENMASK_ULL(63, 12)
> +
> +/**
> + * struct riscv_iommu_msi_pte - MSI Page Table Entry
> + * @pte: MSI PTE
> + * @mrif_info: Memory-resident interrupt file info
> + *
> + * The MSI Page Table is used for virtualizing MSIs, so that when
> + * a device sends an MSI to a guest, the IOMMU can reroute it
> + * by translating the MSI address, either to a guest interrupt file
> + * or a memory resident interrupt file (MRIF). Note that this page table
> + * is an array of MSI PTEs, not a multi-level pt, each entry
> + * is a leaf entry. For more infos check out the the AIA spec, chapter 9.5.
> + *
> + * Also in basic mode the mrif_info field is ignored by the IOMMU and can
> + * be used by software, any other reserved fields on pte must be zeroed-out
> + * by software.
> + */
> +struct riscv_iommu_msi_pte {
> + u64 pte;
> + u64 mrif_info;
> +};
> +
> +/* Fields on pte */
> +#define RISCV_IOMMU_MSI_PTE_V BIT_ULL(0)
> +#define RISCV_IOMMU_MSI_PTE_M GENMASK_ULL(2, 1)
> +#define RISCV_IOMMU_MSI_PTE_MRIF_ADDR GENMASK_ULL(53, 7) /* When M == 1 (MRIF mode) */
> +#define RISCV_IOMMU_MSI_PTE_PPN RISCV_IOMMU_PPN_FIELD /* When M == 3 (basic mode) */
> +#define RISCV_IOMMU_MSI_PTE_C BIT_ULL(63)
> +
> +/* Fields on mrif_info */
> +#define RISCV_IOMMU_MSI_MRIF_NID GENMASK_ULL(9, 0)
> +#define RISCV_IOMMU_MSI_MRIF_NPPN RISCV_IOMMU_PPN_FIELD
> +#define RISCV_IOMMU_MSI_MRIF_NID_MSB BIT_ULL(60)
> +
> +#endif /* _RISCV_IOMMU_BITS_H_ */
> diff --git a/drivers/iommu/riscv/iommu-pci.c b/drivers/iommu/riscv/iommu-pci.c
> new file mode 100644
> index 000000000000..c91f963d7a29
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-pci.c
> @@ -0,0 +1,134 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * RISCV IOMMU as a PCIe device
> + *
> + * Authors
> + * Tomasz Jeznach <[email protected]>
> + * Nick Kossifidis <[email protected]>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/compiler.h>
> +#include <linux/pci.h>
> +#include <linux/init.h>
> +#include <linux/iommu.h>
> +#include <linux/bitfield.h>
> +
> +#include "iommu.h"
> +
> +/* Rivos Inc. assigned PCI Vendor and Device IDs */
> +#ifndef PCI_VENDOR_ID_RIVOS
> +#define PCI_VENDOR_ID_RIVOS 0x1efd
> +#endif
> +
> +#ifndef PCI_DEVICE_ID_RIVOS_IOMMU
> +#define PCI_DEVICE_ID_RIVOS_IOMMU 0xedf1
> +#endif
> +
> +static int riscv_iommu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> +{
> + struct device *dev = &pdev->dev;
> + struct riscv_iommu_device *iommu;
> + int ret;
> +
> + ret = pci_enable_device_mem(pdev);
> + if (ret < 0)
> + return ret;
> +
> + ret = pci_request_mem_regions(pdev, KBUILD_MODNAME);
> + if (ret < 0)
> + goto fail;
> +
> + ret = -ENOMEM;
> +
> + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> + if (!iommu)
> + goto fail;
> +
> + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM))
> + goto fail;
> +
> + if (pci_resource_len(pdev, 0) < RISCV_IOMMU_REG_SIZE)
> + goto fail;
> +
> + iommu->reg_phys = pci_resource_start(pdev, 0);
> + if (!iommu->reg_phys)
> + goto fail;
> +
> + iommu->reg = devm_ioremap(dev, iommu->reg_phys, RISCV_IOMMU_REG_SIZE);
> + if (!iommu->reg)
> + goto fail;
> +
> + iommu->dev = dev;
> + dev_set_drvdata(dev, iommu);
> +
> + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
> + pci_set_master(pdev);
> +
> + ret = riscv_iommu_init(iommu);
> + if (!ret)
> + return ret;
> +
> + fail:
> + pci_clear_master(pdev);
> + pci_release_regions(pdev);
> + pci_disable_device(pdev);
> + /* Note: devres_release_all() will release iommu and iommu->reg */
> + return ret;
> +}
> +
> +static void riscv_iommu_pci_remove(struct pci_dev *pdev)
> +{
> + riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
> + pci_clear_master(pdev);
> + pci_release_regions(pdev);
> + pci_disable_device(pdev);
> +}
> +
> +static int riscv_iommu_suspend(struct device *dev)
> +{
> + dev_warn(dev, "RISC-V IOMMU PM not implemented");
> + return -ENODEV;
> +}
> +
> +static int riscv_iommu_resume(struct device *dev)
> +{
> + dev_warn(dev, "RISC-V IOMMU PM not implemented");
> + return -ENODEV;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(riscv_iommu_pm_ops, riscv_iommu_suspend,
> + riscv_iommu_resume);
> +
> +static const struct pci_device_id riscv_iommu_pci_tbl[] = {
> + {PCI_VENDOR_ID_RIVOS, PCI_DEVICE_ID_RIVOS_IOMMU,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {0,}
> +};
> +
> +MODULE_DEVICE_TABLE(pci, riscv_iommu_pci_tbl);
> +
> +static const struct of_device_id riscv_iommu_of_match[] = {
> + {.compatible = "riscv,pci-iommu",},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, riscv_iommu_of_match);
> +
> +static struct pci_driver riscv_iommu_pci_driver = {
> + .name = KBUILD_MODNAME,
> + .id_table = riscv_iommu_pci_tbl,
> + .probe = riscv_iommu_pci_probe,
> + .remove = riscv_iommu_pci_remove,
> + .driver = {
> + .pm = pm_sleep_ptr(&riscv_iommu_pm_ops),
> + .of_match_table = riscv_iommu_of_match,
> + },
> +};
> +
> +module_driver(riscv_iommu_pci_driver, pci_register_driver, pci_unregister_driver);
> diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c
> new file mode 100644
> index 000000000000..e4e8ca6711e7
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-platform.c
> @@ -0,0 +1,94 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * RISC-V IOMMU as a platform device
> + *
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * Author: Nick Kossifidis <[email protected]>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of_platform.h>
> +#include <linux/bitfield.h>
> +
> +#include "iommu-bits.h"
> +#include "iommu.h"
> +
> +static int riscv_iommu_platform_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct riscv_iommu_device *iommu = NULL;
> + struct resource *res = NULL;
> + int ret = 0;
> +
> + iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
> + if (!iommu)
> + return -ENOMEM;
> +
> + iommu->dev = dev;
> + dev_set_drvdata(dev, iommu);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev, "could not find resource for register region\n");
> + return -EINVAL;
> + }
> +
> + iommu->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(iommu->reg)) {
> + ret = dev_err_probe(dev, PTR_ERR(iommu->reg),
> + "could not map register region\n");
> + goto fail;
> + };
> +
> + iommu->reg_phys = res->start;
> +
> + ret = -ENODEV;
> +
> + /* Sanity check: Did we get the whole register space ? */
> + if ((res->end - res->start + 1) < RISCV_IOMMU_REG_SIZE) {
> + dev_err(dev, "device region smaller than register file (0x%llx)\n",
> + res->end - res->start);
> + goto fail;
> + }
> +
> + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> +
> + return riscv_iommu_init(iommu);
> +
> + fail:
> + /* Note: devres_release_all() will release iommu and iommu->reg */
> + return ret;
> +};
> +
> +static void riscv_iommu_platform_remove(struct platform_device *pdev)
> +{
> + riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
> +};
> +
> +static void riscv_iommu_platform_shutdown(struct platform_device *pdev)
> +{
> + return;
> +};
> +
> +static const struct of_device_id riscv_iommu_of_match[] = {
> + {.compatible = "riscv,iommu",},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, riscv_iommu_of_match);
> +
> +static struct platform_driver riscv_iommu_platform_driver = {
> + .driver = {
> + .name = "riscv,iommu",
> + .of_match_table = riscv_iommu_of_match,
> + .suppress_bind_attrs = true,
> + },
> + .probe = riscv_iommu_platform_probe,
> + .remove_new = riscv_iommu_platform_remove,
> + .shutdown = riscv_iommu_platform_shutdown,
> +};
> +
> +module_driver(riscv_iommu_platform_driver, platform_driver_register,
> + platform_driver_unregister);
> diff --git a/drivers/iommu/riscv/iommu.c b/drivers/iommu/riscv/iommu.c
> new file mode 100644
> index 000000000000..8c236242e2cc
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu.c
> @@ -0,0 +1,660 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * IOMMU API for RISC-V architected Ziommu implementations.
> + *
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * Authors
> + * Tomasz Jeznach <[email protected]>
> + * Nick Kossifidis <[email protected]>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/bitfield.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/compiler.h>
> +#include <linux/pci.h>
> +#include <linux/pci-ats.h>
> +#include <linux/init.h>
> +#include <linux/completion.h>
> +#include <linux/uaccess.h>
> +#include <linux/iommu.h>
> +#include <linux/irqdomain.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-map-ops.h>
> +#include <asm/page.h>
> +
> +#include "../dma-iommu.h"
> +#include "../iommu-sva.h"
> +#include "iommu.h"
> +
> +#include <asm/csr.h>
> +#include <asm/delay.h>
> +
> +MODULE_DESCRIPTION("IOMMU driver for RISC-V architected Ziommu implementations");
> +MODULE_AUTHOR("Tomasz Jeznach <[email protected]>");
> +MODULE_AUTHOR("Nick Kossifidis <[email protected]>");
> +MODULE_ALIAS("riscv-iommu");
> +MODULE_LICENSE("GPL v2");
> +
> +/* Global IOMMU params. */
> +static int ddt_mode = RISCV_IOMMU_DDTP_MODE_BARE;
> +module_param(ddt_mode, int, 0644);
> +MODULE_PARM_DESC(ddt_mode, "Device Directory Table mode.");
> +
> +/* IOMMU PSCID allocation namespace. */
> +#define RISCV_IOMMU_MAX_PSCID (1U << 20)
> +static DEFINE_IDA(riscv_iommu_pscids);
> +
> +/* 1 second */
> +#define RISCV_IOMMU_TIMEOUT riscv_timebase
> +
> +/* RISC-V IOMMU PPN <> PHYS address conversions, PHYS <=> PPN[53:10] */
> +#define phys_to_ppn(va) (((va) >> 2) & (((1ULL << 44) - 1) << 10))
> +#define ppn_to_phys(pn) (((pn) << 2) & (((1ULL << 44) - 1) << 12))
> +
> +#define iommu_domain_to_riscv(iommu_domain) \
> + container_of(iommu_domain, struct riscv_iommu_domain, domain)
> +
> +#define iommu_device_to_riscv(iommu_device) \
> + container_of(iommu_device, struct riscv_iommu, iommu)
> +
> +static const struct iommu_domain_ops riscv_iommu_domain_ops;
> +static const struct iommu_ops riscv_iommu_ops;
> +
> +/*
> + * Register device for IOMMU tracking.
> + */
> +static void riscv_iommu_add_device(struct riscv_iommu_device *iommu, struct device *dev)
> +{
> + struct riscv_iommu_endpoint *ep, *rb_ep;
> + struct rb_node **new_node, *parent_node = NULL;
> +
> + mutex_lock(&iommu->eps_mutex);
> +
> + ep = dev_iommu_priv_get(dev);
> +
> + new_node = &(iommu->eps.rb_node);
> + while (*new_node) {
> + rb_ep = rb_entry(*new_node, struct riscv_iommu_endpoint, node);
> + parent_node = *new_node;
> + if (rb_ep->devid > ep->devid) {
> + new_node = &((*new_node)->rb_left);
> + } else if (rb_ep->devid < ep->devid) {
> + new_node = &((*new_node)->rb_right);
> + } else {
> + dev_warn(dev, "device %u already in the tree\n", ep->devid);
> + break;
> + }
> + }
> +
> + rb_link_node(&ep->node, parent_node, new_node);
> + rb_insert_color(&ep->node, &iommu->eps);
> +
> + mutex_unlock(&iommu->eps_mutex);
> +}
> +
> +/*
> + * Endpoint management
> + */
> +
> +static int riscv_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
> +{
> + return iommu_fwspec_add_ids(dev, args->args, 1);
> +}
> +
> +static bool riscv_iommu_capable(struct device *dev, enum iommu_cap cap)
> +{
> + switch (cap) {
> + case IOMMU_CAP_CACHE_COHERENCY:
> + case IOMMU_CAP_PRE_BOOT_PROTECTION:
> + return true;
> +
> + default:
> + break;
> + }
> +
> + return false;
> +}
> +
> +static struct iommu_device *riscv_iommu_probe_device(struct device *dev)
> +{
> + struct riscv_iommu_device *iommu;
> + struct riscv_iommu_endpoint *ep;
> + struct iommu_fwspec *fwspec;
> +
> + fwspec = dev_iommu_fwspec_get(dev);
> + if (!fwspec || fwspec->ops != &riscv_iommu_ops ||
> + !fwspec->iommu_fwnode || !fwspec->iommu_fwnode->dev)
> + return ERR_PTR(-ENODEV);
> +
> + iommu = dev_get_drvdata(fwspec->iommu_fwnode->dev);
> + if (!iommu)
> + return ERR_PTR(-ENODEV);
> +
> + if (dev_iommu_priv_get(dev))
> + return &iommu->iommu;
> +
> + ep = kzalloc(sizeof(*ep), GFP_KERNEL);
> + if (!ep)
> + return ERR_PTR(-ENOMEM);
> +
> + mutex_init(&ep->lock);
> + INIT_LIST_HEAD(&ep->domain);
> +
> + if (dev_is_pci(dev)) {
> + ep->devid = pci_dev_id(to_pci_dev(dev));
> + ep->domid = pci_domain_nr(to_pci_dev(dev)->bus);
> + } else {
> + /* TODO: Make this generic, for now hardcode domain id to 0 */
> + ep->devid = fwspec->ids[0];
> + ep->domid = 0;
> + }
> +
> + ep->iommu = iommu;
> + ep->dev = dev;
> +
> + dev_info(iommu->dev, "adding device to iommu with devid %i in domain %i\n",
> + ep->devid, ep->domid);
> +
> + dev_iommu_priv_set(dev, ep);
> + riscv_iommu_add_device(iommu, dev);
> +
> + return &iommu->iommu;
> +}
> +
> +static void riscv_iommu_probe_finalize(struct device *dev)
> +{
> + set_dma_ops(dev, NULL);
> + iommu_setup_dma_ops(dev, 0, U64_MAX);
> +}
> +
> +static void riscv_iommu_release_device(struct device *dev)
> +{
> + struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
> + struct riscv_iommu_device *iommu = ep->iommu;
> +
> + dev_info(dev, "device with devid %i released\n", ep->devid);
> +
> + mutex_lock(&ep->lock);
> + list_del(&ep->domain);
> + mutex_unlock(&ep->lock);
> +
> + /* Remove endpoint from IOMMU tracking structures */
> + mutex_lock(&iommu->eps_mutex);
> + rb_erase(&ep->node, &iommu->eps);
> + mutex_unlock(&iommu->eps_mutex);
> +
> + set_dma_ops(dev, NULL);
> + dev_iommu_priv_set(dev, NULL);
> +
> + kfree(ep);
> +}
> +
> +static struct iommu_group *riscv_iommu_device_group(struct device *dev)
> +{
> + if (dev_is_pci(dev))
> + return pci_device_group(dev);
> + return generic_device_group(dev);
> +}
> +
> +static void riscv_iommu_get_resv_regions(struct device *dev, struct list_head *head)
> +{
> + iommu_dma_get_resv_regions(dev, head);
> +}
> +
> +/*
> + * Domain management
> + */
> +
> +static struct iommu_domain *riscv_iommu_domain_alloc(unsigned type)
> +{
> + struct riscv_iommu_domain *domain;
> +
> + if (type != IOMMU_DOMAIN_IDENTITY &&
> + type != IOMMU_DOMAIN_BLOCKED)
> + return NULL;
> +
> + domain = kzalloc(sizeof(*domain), GFP_KERNEL);
> + if (!domain)
> + return NULL;
> +
> + mutex_init(&domain->lock);
> + INIT_LIST_HEAD(&domain->endpoints);
> +
> + domain->domain.ops = &riscv_iommu_domain_ops;
> + domain->mode = RISCV_IOMMU_DC_FSC_MODE_BARE;
> + domain->pscid = ida_alloc_range(&riscv_iommu_pscids, 1,
> + RISCV_IOMMU_MAX_PSCID, GFP_KERNEL);
> +
> + printk("domain type %x alloc %u\n", type, domain->pscid);
> +
> + return &domain->domain;
> +}
> +
> +static void riscv_iommu_domain_free(struct iommu_domain *iommu_domain)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (!list_empty(&domain->endpoints)) {
> + pr_warn("IOMMU domain is not empty!\n");
> + }
> +
> + if (domain->pgd_root)
> + free_pages((unsigned long)domain->pgd_root, 0);
> +
> + if ((int)domain->pscid > 0)
> + ida_free(&riscv_iommu_pscids, domain->pscid);
> +
> + printk("domain free %u\n", domain->pscid);
> +
> + kfree(domain);
> +}
> +
> +static int riscv_iommu_domain_finalize(struct riscv_iommu_domain *domain,
> + struct riscv_iommu_device *iommu)
> +{
> + struct iommu_domain_geometry *geometry;
> +
> + /* Domain assigned to another iommu */
> + if (domain->iommu && domain->iommu != iommu)
> + return -EINVAL;
> + /* Domain already initialized */
> + else if (domain->iommu)
> + return 0;
> +
> + /*
> + * TODO: Before using VA_BITS and satp_mode here, verify they
> + * are supported by the iommu, through the capabilities register.
> + */
> +
> + geometry = &domain->domain.geometry;
> +
> + /*
> + * Note: RISC-V Privilege spec mandates that virtual addresses
> + * need to be sign-extended, so if (VA_BITS - 1) is set, all
> + * bits >= VA_BITS need to also be set or else we'll get a
> + * page fault. However the code that creates the mappings
> + * above us (e.g. iommu_dma_alloc_iova()) won't do that for us
> + * for now, so we'll end up with invalid virtual addresses
> + * to map. As a workaround until we get this sorted out
> + * limit the available virtual addresses to VA_BITS - 1.
> + */
> + geometry->aperture_start = 0;
> + geometry->aperture_end = DMA_BIT_MASK(VA_BITS - 1);
> + geometry->force_aperture = true;
> +
> + domain->iommu = iommu;
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
> + return 0;
> +
> + /* TODO: Fix this for RV32 */
> + domain->mode = satp_mode >> 60;
> + domain->pgd_root = (pgd_t *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, 0);
> +
> + if (!domain->pgd_root)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> +static int riscv_iommu_attach_dev(struct iommu_domain *iommu_domain, struct device *dev)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> + struct riscv_iommu_endpoint *ep = dev_iommu_priv_get(dev);
> + int ret;
> +
> + /* PSCID not valid */
> + if ((int)domain->pscid < 0)
> + return -ENOMEM;
> +
> + mutex_lock(&domain->lock);
> + mutex_lock(&ep->lock);
> +
> + if (!list_empty(&ep->domain)) {
> + dev_warn(dev, "endpoint already attached to a domain. dropping\n");
> + list_del_init(&ep->domain);
> + }
> +
> + /* allocate root pages, initialize io-pgtable ops, etc. */
> + ret = riscv_iommu_domain_finalize(domain, ep->iommu);
> + if (ret < 0) {
> + dev_err(dev, "can not finalize domain: %d\n", ret);
> + mutex_unlock(&ep->lock);
> + mutex_unlock(&domain->lock);
> + return ret;
> + }
> +
> + if (ep->iommu->ddt_mode != RISCV_IOMMU_DDTP_MODE_BARE ||
> + domain->domain.type != IOMMU_DOMAIN_IDENTITY) {
> + dev_warn(dev, "domain type %d not supported\n",
> + domain->domain.type);
> + return -ENODEV;
> + }
> +
> + list_add_tail(&ep->domain, &domain->endpoints);
> + mutex_unlock(&ep->lock);
> + mutex_unlock(&domain->lock);
> +
> + dev_info(dev, "domain type %d attached w/ PSCID %u\n",
> + domain->domain.type, domain->pscid);
> +
> + return 0;
> +}
> +
> +static void riscv_iommu_flush_iotlb_range(struct iommu_domain *iommu_domain,
> + unsigned long *start, unsigned long *end,
> + size_t *pgsize)
> +{
> + /* Command interface not implemented */
> +}
> +
> +static void riscv_iommu_flush_iotlb_all(struct iommu_domain *iommu_domain)
> +{
> + riscv_iommu_flush_iotlb_range(iommu_domain, NULL, NULL, NULL);
> +}
> +
> +static void riscv_iommu_iotlb_sync(struct iommu_domain *iommu_domain,
> + struct iommu_iotlb_gather *gather)
> +{
> + riscv_iommu_flush_iotlb_range(iommu_domain, &gather->start, &gather->end,
> + &gather->pgsize);
> +}
> +
> +static void riscv_iommu_iotlb_sync_map(struct iommu_domain *iommu_domain,
> + unsigned long iova, size_t size)
> +{
> + unsigned long end = iova + size - 1;
> + /*
> + * Given we don't know the page size used by this range, we assume the
> + * smallest page size to ensure all possible entries are flushed from
> + * the IOATC.
> + */
> + size_t pgsize = PAGE_SIZE;
> + riscv_iommu_flush_iotlb_range(iommu_domain, &iova, &end, &pgsize);
> +}
> +
> +static int riscv_iommu_map_pages(struct iommu_domain *iommu_domain,
> + unsigned long iova, phys_addr_t phys,
> + size_t pgsize, size_t pgcount, int prot,
> + gfp_t gfp, size_t *mapped)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY) {
> + *mapped = pgsize * pgcount;
> + return 0;
> + }
> +
> + return -ENODEV;
> +}
> +
> +static size_t riscv_iommu_unmap_pages(struct iommu_domain *iommu_domain,
> + unsigned long iova, size_t pgsize,
> + size_t pgcount, struct iommu_iotlb_gather *gather)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
> + return pgsize * pgcount;
> +
> + return 0;
> +}
> +
> +static phys_addr_t riscv_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
> + dma_addr_t iova)
> +{
> + struct riscv_iommu_domain *domain = iommu_domain_to_riscv(iommu_domain);
> +
> + if (domain->domain.type == IOMMU_DOMAIN_IDENTITY)
> + return (phys_addr_t) iova;
> +
> + return 0;
> +}
> +
> +/*
> + * Translation mode setup
> + */
> +
> +static u64 riscv_iommu_get_ddtp(struct riscv_iommu_device *iommu)
> +{
> + u64 ddtp;
> + cycles_t end_cycles = RISCV_IOMMU_TIMEOUT + get_cycles();
> +
> + /* Wait for DDTP.BUSY to be cleared and return latest value */
> + do {
> + ddtp = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_DDTP);
> + if (!(ddtp & RISCV_IOMMU_DDTP_BUSY))
> + break;
> + cpu_relax();
> + } while (get_cycles() < end_cycles);
> +
> + return ddtp;
> +}
> +
> +static void riscv_iommu_ddt_cleanup(struct riscv_iommu_device *iommu)
> +{
> + /* TODO: teardown whole device directory tree. */
> + if (iommu->ddtp) {
> + if (iommu->ddtp_in_iomem) {
> + iounmap((void *)iommu->ddtp);
> + } else
> + free_page(iommu->ddtp);
> + iommu->ddtp = 0;
> + }
> +}
> +
> +static int riscv_iommu_enable(struct riscv_iommu_device *iommu, unsigned requested_mode)
> +{
> + struct device *dev = iommu->dev;
> + u64 ddtp = 0;
> + u64 ddtp_paddr = 0;
> + unsigned mode = requested_mode;
> + unsigned mode_readback = 0;
> +
> + ddtp = riscv_iommu_get_ddtp(iommu);
> + if (ddtp & RISCV_IOMMU_DDTP_BUSY)
> + return -EBUSY;
> +
> + /* Disallow state transtion from xLVL to xLVL. */
> + switch (FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp)) {
> + case RISCV_IOMMU_DDTP_MODE_BARE:
> + case RISCV_IOMMU_DDTP_MODE_OFF:
> + break;
> + default:
> + if ((mode != RISCV_IOMMU_DDTP_MODE_BARE)
> + && (mode != RISCV_IOMMU_DDTP_MODE_OFF))
> + return -EINVAL;
> + break;
> + }
> +
> + retry:
> + switch (mode) {
> + case RISCV_IOMMU_DDTP_MODE_BARE:
> + case RISCV_IOMMU_DDTP_MODE_OFF:
> + riscv_iommu_ddt_cleanup(iommu);
> + ddtp = FIELD_PREP(RISCV_IOMMU_DDTP_MODE, mode);
> + break;
> + case RISCV_IOMMU_DDTP_MODE_1LVL:
> + case RISCV_IOMMU_DDTP_MODE_2LVL:
> + case RISCV_IOMMU_DDTP_MODE_3LVL:
> + if (!iommu->ddtp) {
> + /*
> + * We haven't initialized ddtp yet, since it's WARL make
> + * sure that we don't have a hardwired PPN field there
> + * that points to i/o memory instead.
> + */
> + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, 0);
> + ddtp = riscv_iommu_get_ddtp(iommu);
> + ddtp_paddr = ppn_to_phys(ddtp);
> + if (ddtp_paddr) {
> + dev_warn(dev, "ddtp at 0x%llx\n", ddtp_paddr);
> + iommu->ddtp =
> + (unsigned long)ioremap(ddtp_paddr, PAGE_SIZE);
> + iommu->ddtp_in_iomem = true;
> + } else {
> + iommu->ddtp = get_zeroed_page(GFP_KERNEL);
> + }
> + }
> + if (!iommu->ddtp)
> + return -ENOMEM;
> +
> + ddtp = FIELD_PREP(RISCV_IOMMU_DDTP_MODE, mode) |
> + phys_to_ppn(__pa(iommu->ddtp));
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, ddtp);
> + ddtp = riscv_iommu_get_ddtp(iommu);
> + if (ddtp & RISCV_IOMMU_DDTP_BUSY) {
> + dev_warn(dev, "timeout when setting ddtp (ddt mode: %i)\n", mode);
> + return -EBUSY;
> + }
> +
> + mode_readback = FIELD_GET(RISCV_IOMMU_DDTP_MODE, ddtp);
> + dev_info(dev, "mode_readback: %i, mode: %i\n", mode_readback, mode);
> + if (mode_readback != mode) {
> + /*
> + * Mode field is WARL, an I/O MMU may support a subset of
> + * directory table levels in which case if we tried to set
> + * an unsupported number of levels we'll readback either
> + * a valid xLVL or off/bare. If we got off/bare, try again
> + * with a smaller xLVL.
> + */
> + if (mode_readback < RISCV_IOMMU_DDTP_MODE_1LVL &&
> + mode > RISCV_IOMMU_DDTP_MODE_1LVL) {
> + mode--;
> + goto retry;
> + }
> +
> + /*
> + * We tried all supported xLVL modes and still got off/bare instead,
> + * an I/O MMU must support at least one supported xLVL mode so something
> + * went very wrong.
> + */
> + if (mode_readback < RISCV_IOMMU_DDTP_MODE_1LVL &&
> + mode == RISCV_IOMMU_DDTP_MODE_1LVL)
> + goto fail;
> +
> + /*
> + * We tried setting off or bare and got something else back, something
> + * went very wrong since off/bare is always legal.
> + */
> + if (mode < RISCV_IOMMU_DDTP_MODE_1LVL)
> + goto fail;
> +
> + /*
> + * We tried setting an xLVL mode but got another xLVL mode that
> + * we don't support (e.g. a custom one).
> + */
> + if (mode_readback > RISCV_IOMMU_DDTP_MODE_MAX)
> + goto fail;
> +
> + /* We tried setting an xLVL mode but got another supported xLVL mode */
> + mode = mode_readback;
> + }
> +
> + if (mode != requested_mode)
> + dev_warn(dev, "unsupported DDT mode requested (%i), using %i instead\n",
> + requested_mode, mode);
> +
> + iommu->ddt_mode = mode;
> + dev_info(dev, "ddt_mode: %i\n", iommu->ddt_mode);
> + return 0;
> +
> + fail:
> + dev_err(dev, "failed to set DDT mode, tried: %i and got %i\n", mode,
> + mode_readback);
> + riscv_iommu_ddt_cleanup(iommu);
> + return -EINVAL;
> +}
> +
> +/*
> + * Common I/O MMU driver probe/teardown
> + */
> +
> +static const struct iommu_domain_ops riscv_iommu_domain_ops = {
> + .free = riscv_iommu_domain_free,
> + .attach_dev = riscv_iommu_attach_dev,
Could I know why there is no implementation of '.detach_dev' ? It
seems that we need to clear something when device is detached, such as
device context.
> + .map_pages = riscv_iommu_map_pages,
> + .unmap_pages = riscv_iommu_unmap_pages,
> + .iova_to_phys = riscv_iommu_iova_to_phys,
> + .iotlb_sync = riscv_iommu_iotlb_sync,
> + .iotlb_sync_map = riscv_iommu_iotlb_sync_map,
> + .flush_iotlb_all = riscv_iommu_flush_iotlb_all,
> +};
> +
> +static const struct iommu_ops riscv_iommu_ops = {
> + .owner = THIS_MODULE,
> + .pgsize_bitmap = SZ_4K | SZ_2M | SZ_512M,
> + .capable = riscv_iommu_capable,
> + .domain_alloc = riscv_iommu_domain_alloc,
> + .probe_device = riscv_iommu_probe_device,
> + .probe_finalize = riscv_iommu_probe_finalize,
> + .release_device = riscv_iommu_release_device,
> + .device_group = riscv_iommu_device_group,
> + .get_resv_regions = riscv_iommu_get_resv_regions,
> + .of_xlate = riscv_iommu_of_xlate,
> + .default_domain_ops = &riscv_iommu_domain_ops,
> +};
> +
> +void riscv_iommu_remove(struct riscv_iommu_device *iommu)
> +{
> + iommu_device_unregister(&iommu->iommu);
> + riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_OFF);
> +}
> +
> +int riscv_iommu_init(struct riscv_iommu_device *iommu)
> +{
> + struct device *dev = iommu->dev;
> + u32 fctl = 0;
> + int ret;
> +
> + iommu->eps = RB_ROOT;
> +
> + fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL);
> +
> +#ifdef CONFIG_CPU_BIG_ENDIAN
> + if (!(cap & RISCV_IOMMU_CAP_END)) {
> + dev_err(dev, "IOMMU doesn't support Big Endian\n");
> + return -EIO;
> + } else if (!(fctl & RISCV_IOMMU_FCTL_BE)) {
> + fctl |= FIELD_PREP(RISCV_IOMMU_FCTL_BE, 1);
> + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, fctl);
> + }
> +#endif
> +
> + /* Clear any pending interrupt flag. */
> + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_IPSR,
> + RISCV_IOMMU_IPSR_CIP |
> + RISCV_IOMMU_IPSR_FIP |
> + RISCV_IOMMU_IPSR_PMIP | RISCV_IOMMU_IPSR_PIP);
> + spin_lock_init(&iommu->cq_lock);
> + mutex_init(&iommu->eps_mutex);
> +
> + ret = riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_BARE);
> +
> + if (ret) {
> + dev_err(dev, "cannot enable iommu device (%d)\n", ret);
> + goto fail;
> + }
> +
> + ret = iommu_device_register(&iommu->iommu, &riscv_iommu_ops, dev);
> + if (ret) {
> + dev_err(dev, "cannot register iommu interface (%d)\n", ret);
> + iommu_device_sysfs_remove(&iommu->iommu);
> + goto fail;
> + }
> +
> + return 0;
> + fail:
> + riscv_iommu_enable(iommu, RISCV_IOMMU_DDTP_MODE_OFF);
> + return ret;
> +}
> diff --git a/drivers/iommu/riscv/iommu.h b/drivers/iommu/riscv/iommu.h
> new file mode 100644
> index 000000000000..7baefd3630b3
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu.h
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright © 2022-2023 Rivos Inc.
> + * Copyright © 2023 FORTH-ICS/CARV
> + *
> + * RISC-V Ziommu - IOMMU Interface Specification.
> + *
> + * Authors
> + * Tomasz Jeznach <[email protected]>
> + * Nick Kossifidis <[email protected]>
> + */
> +
> +#ifndef _RISCV_IOMMU_H_
> +#define _RISCV_IOMMU_H_
> +
> +#include <linux/types.h>
> +#include <linux/iova.h>
> +#include <linux/io.h>
> +#include <linux/idr.h>
> +#include <linux/list.h>
> +#include <linux/iommu.h>
> +#include <linux/io-pgtable.h>
> +
> +#include "iommu-bits.h"
> +
> +#define IOMMU_PAGE_SIZE_4K BIT_ULL(12)
> +#define IOMMU_PAGE_SIZE_2M BIT_ULL(21)
> +#define IOMMU_PAGE_SIZE_1G BIT_ULL(30)
> +#define IOMMU_PAGE_SIZE_512G BIT_ULL(39)
> +
> +struct riscv_iommu_device {
> + struct iommu_device iommu; /* iommu core interface */
> + struct device *dev; /* iommu hardware */
> +
> + /* hardware control register space */
> + void __iomem *reg;
> + resource_size_t reg_phys;
> +
> + /* IRQs for the various queues */
> + int irq_cmdq;
> + int irq_fltq;
> + int irq_pm;
> + int irq_priq;
> +
> + /* supported and enabled hardware capabilities */
> + u64 cap;
> +
> + /* global lock, to be removed */
> + spinlock_t cq_lock;
> +
> + /* device directory table root pointer and mode */
> + unsigned long ddtp;
> + unsigned ddt_mode;
> + bool ddtp_in_iomem;
> +
> + /* Connected end-points */
> + struct rb_root eps;
> + struct mutex eps_mutex;
> +};
> +
> +struct riscv_iommu_domain {
> + struct iommu_domain domain;
> +
> + struct list_head endpoints;
> + struct mutex lock;
> + struct riscv_iommu_device *iommu;
> +
> + unsigned mode; /* RIO_ATP_MODE_* enum */
> + unsigned pscid; /* RISC-V IOMMU PSCID */
> +
> + pgd_t *pgd_root; /* page table root pointer */
> +};
> +
> +/* Private dev_iommu_priv object, device-domain relationship. */
> +struct riscv_iommu_endpoint {
> + struct device *dev; /* platform or PCI endpoint device */
> + unsigned devid; /* PCI bus:device:function number */
> + unsigned domid; /* PCI domain number, segment */
> + struct rb_node node; /* device tracking node (lookup by devid) */
> + struct riscv_iommu_device *iommu; /* parent iommu device */
> +
> + struct mutex lock;
> + struct list_head domain; /* endpoint attached managed domain */
> +};
> +
> +/* Helper functions and macros */
> +
> +static inline u32 riscv_iommu_readl(struct riscv_iommu_device *iommu,
> + unsigned offset)
> +{
> + return readl_relaxed(iommu->reg + offset);
> +}
> +
> +static inline void riscv_iommu_writel(struct riscv_iommu_device *iommu,
> + unsigned offset, u32 val)
> +{
> + writel_relaxed(val, iommu->reg + offset);
> +}
> +
> +static inline u64 riscv_iommu_readq(struct riscv_iommu_device *iommu,
> + unsigned offset)
> +{
> + return readq_relaxed(iommu->reg + offset);
> +}
> +
> +static inline void riscv_iommu_writeq(struct riscv_iommu_device *iommu,
> + unsigned offset, u64 val)
> +{
> + writeq_relaxed(val, iommu->reg + offset);
> +}
> +
> +int riscv_iommu_init(struct riscv_iommu_device *iommu);
> +void riscv_iommu_remove(struct riscv_iommu_device *iommu);
> +
> +#endif
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
On 7/20/23 03:33, Tomasz Jeznach wrote:
> ... > +#endif /* _RISCV_IOMMU_BITS_H_ */
> diff --git a/drivers/iommu/riscv/iommu-pci.c b/drivers/iommu/riscv/iommu-pci.c
> new file mode 100644
> index 000000000000..c91f963d7a29
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-pci.c
> @@ -0,0 +1,134 @@
> ...
> +
> +static struct pci_driver riscv_iommu_pci_driver = {
> + .name = KBUILD_MODNAME,
> + .id_table = riscv_iommu_pci_tbl,
> + .probe = riscv_iommu_pci_probe,
> + .remove = riscv_iommu_pci_remove,
> + .driver = {
> + .pm = pm_sleep_ptr(&riscv_iommu_pm_ops),
> + .of_match_table = riscv_iommu_of_match,
> + },
> +};
> +
> +module_driver(riscv_iommu_pci_driver, pci_register_driver, pci_unregister_driver);
There's helper macro to be considered, and not forced to:
module_pci_driver(riscv_iommu_pci_driver);
> diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c
> new file mode 100644
> index 000000000000..e4e8ca6711e7
> --- /dev/null
> +++ b/drivers/iommu/riscv/iommu-platform.c
> @@ -0,0 +1,94 @@
> ...
> +
> +static struct platform_driver riscv_iommu_platform_driver = {
> + .driver = {
> + .name = "riscv,iommu",
> + .of_match_table = riscv_iommu_of_match,
> + .suppress_bind_attrs = true,
> + },
> + .probe = riscv_iommu_platform_probe,
> + .remove_new = riscv_iommu_platform_remove,
> + .shutdown = riscv_iommu_platform_shutdown,
> +};
> +
> +module_driver(riscv_iommu_platform_driver, platform_driver_register,
> + platform_driver_unregister);
And also:
module_platform_driver(riscv_iommu_platform_driver);