2017-03-08 13:11:08

by SF Markus Elfring

[permalink] [raw]
Subject: [PATCH 11/26] IB/ocrdma: Delete unnecessary braces

From: Markus Elfring <[email protected]>
Date: Tue, 7 Mar 2017 21:12:56 +0100

Do not use curly brackets at some source code places
where a single statement should be sufficient.

Signed-off-by: Markus Elfring <[email protected]>
---
drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
index aa32bc9f323d..d5b988b011d1 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
@@ -1092,14 +1092,14 @@ static int ocrdma_mbx_cmd(struct ocrdma_dev *dev, struct ocrdma_mqe *mqe)
if (cqe_status || ext_status) {
pr_err("%s() cqe_status=0x%x, ext_status=0x%x,",
__func__, cqe_status, ext_status);
- if (rsp) {
+ if (rsp)
/* This is for embedded cmds. */
pr_err("opcode=0x%x, subsystem=0x%x\n",
(rsp->subsys_op & OCRDMA_MBX_RSP_OPCODE_MASK) >>
OCRDMA_MBX_RSP_OPCODE_SHIFT,
(rsp->subsys_op & OCRDMA_MBX_RSP_SUBSYS_MASK) >>
OCRDMA_MBX_RSP_SUBSYS_SHIFT);
- }
+
status = ocrdma_get_mbx_cqe_errno(cqe_status);
goto mbx_err;
}
@@ -1600,10 +1600,9 @@ void ocrdma_alloc_pd_pool(struct ocrdma_dev *dev)
return;

status = ocrdma_mbx_alloc_pd_range(dev);
- if (status) {
+ if (status)
pr_err("%s(%d) Unable to initialize PD pool, using default.\n",
__func__, dev->id);
- }
}

static void ocrdma_free_pd_pool(struct ocrdma_dev *dev)
@@ -2997,11 +2996,10 @@ static int ocrdma_parse_dcbxcfg_rsp(struct ocrdma_dev *dev, int ptype,
goto out;
}
}
- if (slindx == OCRDMA_MAX_SERVICE_LEVEL_INDEX) {
+ if (slindx == OCRDMA_MAX_SERVICE_LEVEL_INDEX)
pr_info("%s ocrdma%d application priority not set for 0x%x protocol\n",
dev_name(&dev->nic_info.pdev->dev),
dev->id, proto);
- }
}
}

@@ -3158,16 +3156,17 @@ static int ocrdma_modify_eqd(struct ocrdma_dev *dev, struct ocrdma_eq *eq,
int num)
{
int num_eqs, i = 0;
- if (num > 8) {
+
+ if (num > 8)
while (num) {
num_eqs = min(num, 8);
ocrdma_mbx_modify_eqd(dev, &eq[i], num_eqs);
i += num_eqs;
num -= num_eqs;
}
- } else {
+ else
ocrdma_mbx_modify_eqd(dev, eq, num);
- }
+
return 0;
}

--
2.12.0


2017-03-08 15:07:48

by Devesh Sharma

[permalink] [raw]
Subject: Re: [PATCH 11/26] IB/ocrdma: Delete unnecessary braces

On Wed, Mar 8, 2017 at 6:34 PM, SF Markus Elfring
<[email protected]> wrote:
> From: Markus Elfring <[email protected]>
> Date: Tue, 7 Mar 2017 21:12:56 +0100
>
> Do not use curly brackets at some source code places
> where a single statement should be sufficient.
>
> Signed-off-by: Markus Elfring <[email protected]>
> ---
> drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 17 ++++++++---------
> 1 file changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
> index aa32bc9f323d..d5b988b011d1 100644
> --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
> +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
> @@ -1092,14 +1092,14 @@ static int ocrdma_mbx_cmd(struct ocrdma_dev *dev, struct ocrdma_mqe *mqe)
> if (cqe_status || ext_status) {
> pr_err("%s() cqe_status=0x%x, ext_status=0x%x,",
> __func__, cqe_status, ext_status);
> - if (rsp) {
> + if (rsp)
> /* This is for embedded cmds. */
> pr_err("opcode=0x%x, subsystem=0x%x\n",
> (rsp->subsys_op & OCRDMA_MBX_RSP_OPCODE_MASK) >>
> OCRDMA_MBX_RSP_OPCODE_SHIFT,
> (rsp->subsys_op & OCRDMA_MBX_RSP_SUBSYS_MASK) >>
> OCRDMA_MBX_RSP_SUBSYS_SHIFT);
> - }
> +
> status = ocrdma_get_mbx_cqe_errno(cqe_status);
> goto mbx_err;
> }
> @@ -1600,10 +1600,9 @@ void ocrdma_alloc_pd_pool(struct ocrdma_dev *dev)
> return;
>
> status = ocrdma_mbx_alloc_pd_range(dev);
> - if (status) {
> + if (status)
> pr_err("%s(%d) Unable to initialize PD pool, using default.\n",
> __func__, dev->id);
> - }
> }
>
> static void ocrdma_free_pd_pool(struct ocrdma_dev *dev)
> @@ -2997,11 +2996,10 @@ static int ocrdma_parse_dcbxcfg_rsp(struct ocrdma_dev *dev, int ptype,
> goto out;
> }
> }
> - if (slindx == OCRDMA_MAX_SERVICE_LEVEL_INDEX) {
> + if (slindx == OCRDMA_MAX_SERVICE_LEVEL_INDEX)
> pr_info("%s ocrdma%d application priority not set for 0x%x protocol\n",
> dev_name(&dev->nic_info.pdev->dev),
> dev->id, proto);
> - }
> }
> }
>
> @@ -3158,16 +3156,17 @@ static int ocrdma_modify_eqd(struct ocrdma_dev *dev, struct ocrdma_eq *eq,
> int num)
> {
> int num_eqs, i = 0;
> - if (num > 8) {
> +
> + if (num > 8)
> while (num) {
> num_eqs = min(num, 8);
> ocrdma_mbx_modify_eqd(dev, &eq[i], num_eqs);
> i += num_eqs;
> num -= num_eqs;
> }

May be compiler would give you a warning here, could you check once?

> - } else {
> + else
> ocrdma_mbx_modify_eqd(dev, eq, num);
> - }
> +
> return 0;
> }
>
> --
> 2.12.0
>

2017-03-08 14:53:35

by Yuval Shaia

[permalink] [raw]
Subject: Re: [PATCH 11/26] IB/ocrdma: Delete unnecessary braces

On Wed, Mar 08, 2017 at 02:04:56PM +0100, SF Markus Elfring wrote:
> From: Markus Elfring <[email protected]>
> Date: Tue, 7 Mar 2017 21:12:56 +0100
>
> Do not use curly brackets at some source code places
> where a single statement should be sufficient.
>
> Signed-off-by: Markus Elfring <[email protected]>
> ---
> drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 17 ++++++++---------
> 1 file changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
> index aa32bc9f323d..d5b988b011d1 100644
> --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
> +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
> @@ -1092,14 +1092,14 @@ static int ocrdma_mbx_cmd(struct ocrdma_dev *dev, struct ocrdma_mqe *mqe)
> if (cqe_status || ext_status) {
> pr_err("%s() cqe_status=0x%x, ext_status=0x%x,",
> __func__, cqe_status, ext_status);
> - if (rsp) {
> + if (rsp)
> /* This is for embedded cmds. */
> pr_err("opcode=0x%x, subsystem=0x%x\n",
> (rsp->subsys_op & OCRDMA_MBX_RSP_OPCODE_MASK) >>
> OCRDMA_MBX_RSP_OPCODE_SHIFT,
> (rsp->subsys_op & OCRDMA_MBX_RSP_SUBSYS_MASK) >>
> OCRDMA_MBX_RSP_SUBSYS_SHIFT);
> - }
> +

Reviewed-by: Yuval Shaia <[email protected]>

> status = ocrdma_get_mbx_cqe_errno(cqe_status);
> goto mbx_err;
> }
> @@ -1600,10 +1600,9 @@ void ocrdma_alloc_pd_pool(struct ocrdma_dev *dev)
> return;
>
> status = ocrdma_mbx_alloc_pd_range(dev);
> - if (status) {
> + if (status)
> pr_err("%s(%d) Unable to initialize PD pool, using default.\n",
> __func__, dev->id);
> - }
> }
>
> static void ocrdma_free_pd_pool(struct ocrdma_dev *dev)
> @@ -2997,11 +2996,10 @@ static int ocrdma_parse_dcbxcfg_rsp(struct ocrdma_dev *dev, int ptype,
> goto out;
> }
> }
> - if (slindx == OCRDMA_MAX_SERVICE_LEVEL_INDEX) {
> + if (slindx == OCRDMA_MAX_SERVICE_LEVEL_INDEX)
> pr_info("%s ocrdma%d application priority not set for 0x%x protocol\n",
> dev_name(&dev->nic_info.pdev->dev),
> dev->id, proto);
> - }
> }
> }
>
> @@ -3158,16 +3156,17 @@ static int ocrdma_modify_eqd(struct ocrdma_dev *dev, struct ocrdma_eq *eq,
> int num)
> {
> int num_eqs, i = 0;
> - if (num > 8) {
> +
> + if (num > 8)
> while (num) {
> num_eqs = min(num, 8);
> ocrdma_mbx_modify_eqd(dev, &eq[i], num_eqs);
> i += num_eqs;
> num -= num_eqs;
> }
> - } else {
> + else
> ocrdma_mbx_modify_eqd(dev, eq, num);
> - }
> +
> return 0;
> }
>
> --
> 2.12.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html