The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
Signed-off-by: Jeffrey Hugo <[email protected]>
---
.../display/panel/sharp,ld-d5116z01b.txt | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
new file mode 100644
index 000000000000..3938c2847fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
@@ -0,0 +1,27 @@
+Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+
+Required properties:
+- compatible: should be "sharp,ld-d5116z01b"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+
+This binding is compatible with the simple-panel binding.
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ panel: panel {
+ compatible = "sharp,ld-d5116z01b";
+ power-supply = <&vlcd_3v3>;
+ no-hpd
+
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&bridge_out_ep>;
+ };
+ };
+ };
--
2.17.1
Hi Jeffrey.
On Fri, Jul 05, 2019 at 09:56:55AM -0700, Jeffrey Hugo wrote:
> The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
>
> Signed-off-by: Jeffrey Hugo <[email protected]>
> ---
> .../display/panel/sharp,ld-d5116z01b.txt | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
> new file mode 100644
> index 000000000000..3938c2847fe5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
> @@ -0,0 +1,27 @@
> +Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
> +
> +Required properties:
> +- compatible: should be "sharp,ld-d5116z01b"
> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
> +
> +This binding is compatible with the simple-panel binding.
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [1]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + panel: panel {
> + compatible = "sharp,ld-d5116z01b";
> + power-supply = <&vlcd_3v3>;
> + no-hpd
The binding do not mention no-hpd - but it is part of panel-simple
binding. Is it included in the example for any special reason?
Also there is a syntax error, ";" is missing.
Sam
> +
> + port {
> + panel_ep: endpoint {
> + remote-endpoint = <&bridge_out_ep>;
> + };
> + };
> + };
> --
> 2.17.1
On Fri, Jul 5, 2019 at 11:23 AM Sam Ravnborg <[email protected]> wrote:
>
> Hi Jeffrey.
>
> On Fri, Jul 05, 2019 at 09:56:55AM -0700, Jeffrey Hugo wrote:
> > + panel: panel {
> > + compatible = "sharp,ld-d5116z01b";
> > + power-supply = <&vlcd_3v3>;
> > + no-hpd
> The binding do not mention no-hpd - but it is part of panel-simple
> binding. Is it included in the example for any special reason?
I just copied (poorly apparently since a ";" is missing) from my
platform's dt. There is no particular reason the example lists
no-hpd. I'll drop it in the next rev.