Add support for 22.05 kHz sample rate for TX.
Signed-off-by: Matus Gajdos <[email protected]>
---
sound/soc/fsl/fsl_spdif.c | 8 ++++++--
sound/soc/fsl/fsl_spdif.h | 6 ++++--
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 015c3708aa04..95e639711eba 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -514,6 +514,10 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream,
int ret;
switch (sample_rate) {
+ case 22050:
+ rate = SPDIF_TXRATE_22050;
+ csfs = IEC958_AES3_CON_FS_22050;
+ break;
case 32000:
rate = SPDIF_TXRATE_32000;
csfs = IEC958_AES3_CON_FS_32000;
@@ -1422,7 +1426,7 @@ static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv,
struct clk *clk, u64 savesub,
enum spdif_txrate index, bool round)
{
- static const u32 rate[] = { 32000, 44100, 48000, 88200, 96000, 176400,
+ static const u32 rate[] = { 22050, 32000, 44100, 48000, 88200, 96000, 176400,
192000, };
bool is_sysclk = clk_is_match(clk, spdif_priv->sysclk);
u64 rate_ideal, rate_actual, sub;
@@ -1483,7 +1487,7 @@ static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv,
static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv,
enum spdif_txrate index)
{
- static const u32 rate[] = { 32000, 44100, 48000, 88200, 96000, 176400,
+ static const u32 rate[] = { 22050, 32000, 44100, 48000, 88200, 96000, 176400,
192000, };
struct platform_device *pdev = spdif_priv->pdev;
struct device *dev = &pdev->dev;
diff --git a/sound/soc/fsl/fsl_spdif.h b/sound/soc/fsl/fsl_spdif.h
index 75b42a692c90..2bc1b10c17d4 100644
--- a/sound/soc/fsl/fsl_spdif.h
+++ b/sound/soc/fsl/fsl_spdif.h
@@ -175,7 +175,8 @@ enum spdif_gainsel {
/* SPDIF tx rate */
enum spdif_txrate {
- SPDIF_TXRATE_32000 = 0,
+ SPDIF_TXRATE_22050 = 0,
+ SPDIF_TXRATE_32000,
SPDIF_TXRATE_44100,
SPDIF_TXRATE_48000,
SPDIF_TXRATE_88200,
@@ -191,7 +192,8 @@ enum spdif_txrate {
#define SPDIF_QSUB_SIZE (SPDIF_UBITS_SIZE / 8)
-#define FSL_SPDIF_RATES_PLAYBACK (SNDRV_PCM_RATE_32000 | \
+#define FSL_SPDIF_RATES_PLAYBACK (SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | \
SNDRV_PCM_RATE_88200 | \
--
2.25.1
On Wed, Jul 19, 2023 at 1:32 PM Matus Gajdos <[email protected]> wrote:
>
> Add support for 22.05 kHz sample rate for TX.
>
> Signed-off-by: Matus Gajdos <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Wed, 19 Jul 2023 18:31:53 +0200, Matus Gajdos wrote:
> Add support for 22.05 kHz sample rate for TX.
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: fsl_spdif: Add support for 22.05 kHz sample rate
commit: 65bc25b8d0904e0aff66b1c3a9dd4c0dcb8efbf1
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark