VAG power control is improved to fit the manual [1]. This patchset fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.
I.e. after boot:
- Connect sound source to Line-In jack;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Also this series includes fixes of non-important bugs in sgtl5000 codec
driver.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Changes in v4:
- CC the patch to kernel-stable
- Code optimization, simplify function signature
(thanks to Cezary Rojewski <[email protected]> for an idea)
- CC the patch to kernel-stable
- Add a Fixes tag
Changes in v3:
- Add the reference to NXP SGTL5000 data sheet to commit message
- Add the reference to NXP SGTL5000 data sheet to commit message
- Fix multi-line comment format
Changes in v2:
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
Oleksandr Suvorov (6):
ASoC: Define a set of DAPM pre/post-up events
ASoC: sgtl5000: Improve VAG power and mute control
ASoC: sgtl5000: Fix definition of VAG Ramp Control
ASoC: sgtl5000: add ADC mute control
ASoC: sgtl5000: Fix of unmute outputs on probe
ASoC: sgtl5000: Fix charge pump source assignment
include/sound/soc-dapm.h | 2 +
sound/soc/codecs/sgtl5000.c | 240 ++++++++++++++++++++++++++++++------
sound/soc/codecs/sgtl5000.h | 2 +-
3 files changed, 203 insertions(+), 41 deletions(-)
--
2.20.1
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
---
Changes in v4:
- CC the patch to kernel-stable
Changes in v3: None
Changes in v2:
- Fix patch formatting
include/sound/soc-dapm.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index c00a0b8ade086..6c66941601307 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -353,6 +353,8 @@ struct device;
#define SND_SOC_DAPM_WILL_PMD 0x80 /* called at start of sequence */
#define SND_SOC_DAPM_PRE_POST_PMD \
(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+#define SND_SOC_DAPM_PRE_POST_PMU \
+ (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)
/* convenience event type detection */
#define SND_SOC_DAPM_EVENT_ON(e) \
--
2.20.1
Change VAG power on/off control according to the following algorithm:
- turn VAG power ON on the 1st incoming event.
- keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
- turn VAG power OFF when there is the latest consumer's pre-down event
come.
- always delay after VAG power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
Also, according to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
---
Changes in v4:
- Code optimization, simplify function signature
(thanks to Cezary Rojewski <[email protected]> for an idea)
- CC the patch to kernel-stable
- Add a Fixes tag
Changes in v3:
- Add the reference to NXP SGTL5000 data sheet to commit message
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 216 ++++++++++++++++++++++++++++++------
1 file changed, 185 insertions(+), 31 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index a6a4748c97f9d..a2aeb5fb9b537 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -31,6 +31,13 @@
#define SGTL5000_DAP_REG_OFFSET 0x0100
#define SGTL5000_MAX_REG_OFFSET 0x013A
+/* Delay for the VAG ramp up */
+#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
+/* Delay for the VAG ramp down */
+#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
+
+#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
+
/* default value of sgtl5000 registers */
static const struct reg_default sgtl5000_reg_defaults[] = {
{ SGTL5000_CHIP_DIG_POWER, 0x0000 },
@@ -123,6 +130,19 @@ enum {
I2S_SCLK_STRENGTH_HIGH,
};
+enum {
+ HP_POWER_EVENT,
+ DAC_POWER_EVENT,
+ ADC_POWER_EVENT,
+ LAST_POWER_EVENT
+};
+
+static u16 mute_mask[] = {
+ SGTL5000_HP_MUTE,
+ SGTL5000_OUTPUTS_MUTE,
+ SGTL5000_OUTPUTS_MUTE
+};
+
/* sgtl5000 private structure in codec */
struct sgtl5000_priv {
int sysclk; /* sysclk rate */
@@ -137,8 +157,109 @@ struct sgtl5000_priv {
u8 micbias_voltage;
u8 lrclk_strength;
u8 sclk_strength;
+ u16 mute_state[LAST_POWER_EVENT];
};
+static inline int hp_sel_input(struct snd_soc_component *component)
+{
+ return (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_CTRL) &
+ SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
+}
+
+static inline u16 mute_output(struct snd_soc_component *component,
+ u16 mute_mask)
+{
+ u16 mute_reg = snd_soc_component_read32(component,
+ SGTL5000_CHIP_ANA_CTRL);
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ mute_mask, mute_mask);
+ return mute_reg;
+}
+
+static inline void restore_output(struct snd_soc_component *component,
+ u16 mute_mask, u16 mute_reg)
+{
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ mute_mask, mute_reg);
+}
+
+static void vag_power_on(struct snd_soc_component *component, u32 source)
+{
+ if (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
+ SGTL5000_VAG_POWERUP)
+ return;
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+
+ /* When VAG powering on to get local loop from Line-In, the sleep
+ * is required to avoid loud pop.
+ */
+ if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
+ source == HP_POWER_EVENT)
+ msleep(SGTL5000_VAG_POWERUP_DELAY);
+}
+
+static int vag_power_consumers(struct snd_soc_component *component,
+ u16 ana_pwr_reg, u32 source)
+{
+ int consumers = 0;
+
+ /* count dac/adc consumers unconditional */
+ if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
+ consumers++;
+ if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
+ consumers++;
+
+ /*
+ * If the event comes from HP and Line-In is selected,
+ * current action is 'DAC to be powered down'.
+ * As HP_POWERUP is not set when HP muxed to line-in,
+ * we need to keep VAG power ON.
+ */
+ if (source == HP_POWER_EVENT) {
+ if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
+ consumers++;
+ } else {
+ if (ana_pwr_reg & SGTL5000_HP_POWERUP)
+ consumers++;
+ }
+
+ return consumers;
+}
+
+static void vag_power_off(struct snd_soc_component *component, u32 source)
+{
+ u16 ana_pwr = snd_soc_component_read32(component,
+ SGTL5000_CHIP_ANA_POWER);
+
+ if (!(ana_pwr & SGTL5000_VAG_POWERUP))
+ return;
+
+ /*
+ * This function calls when any of VAG power consumers is disappearing.
+ * Thus, if there is more than one consumer at the moment, as minimum
+ * one consumer will definitely stay after the end of the current
+ * event.
+ * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
+ * - LINE_IN (for HP events) / HP (for DAC/ADC events)
+ * - DAC
+ * - ADC
+ * (the current consumer is disappearing right now)
+ */
+ if (vag_power_consumers(component, ana_pwr, source) >= 2)
+ return;
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, 0);
+ /* In power down case, we need wait 400-1000 ms
+ * when VAG fully ramped down.
+ * As longer we wait, as smaller pop we've got.
+ */
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+}
+
/*
* mic_bias power on/off share the same register bits with
* output impedance of mic bias, when power on mic bias, we
@@ -170,36 +291,30 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
return 0;
}
-/*
- * As manual described, ADC/DAC only works when VAG powerup,
- * So enabled VAG before ADC/DAC up.
- * In power down case, we need wait 400ms when vag fully ramped down.
- */
-static int power_vag_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
+static int vag_and_mute_control(struct snd_soc_component *component,
+ int event, int event_source)
{
- struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
+ struct sgtl5000_priv *sgtl5000 =
+ snd_soc_component_get_drvdata(component);
switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
- msleep(400);
+ case SND_SOC_DAPM_PRE_PMU:
+ sgtl5000->mute_state[event_source] =
+ mute_output(component, mute_mask[event_source]);
+ break;
+ case SND_SOC_DAPM_POST_PMU:
+ vag_power_on(component, event_source);
+ restore_output(component, mute_mask[event_source],
+ sgtl5000->mute_state[event_source]);
break;
-
case SND_SOC_DAPM_PRE_PMD:
- /*
- * Don't clear VAG_POWERUP, when both DAC and ADC are
- * operational to prevent inadvertently starving the
- * other one of them.
- */
- if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
- mask) != mask) {
- snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, 0);
- msleep(400);
- }
+ sgtl5000->mute_state[event_source] =
+ mute_output(component, mute_mask[event_source]);
+ vag_power_off(component, event_source);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ restore_output(component, mute_mask[event_source],
+ sgtl5000->mute_state[event_source]);
break;
default:
break;
@@ -208,6 +323,41 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
return 0;
}
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, HP_POWER_EVENT);
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, ADC_POWER_EVENT);
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, DAC_POWER_EVENT);
+}
+
/* input sources for ADC */
static const char *adc_mux_text[] = {
"MIC_IN", "LINE_IN"
@@ -280,7 +430,10 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
mic_bias_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+ headphone_pga_event,
+ SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
@@ -301,11 +454,12 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
0, SGTL5000_CHIP_DIG_POWER,
1, 0),
- SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
- SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
-
- SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
- SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
+ SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
+ adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
+ SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
+ dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
};
/* routes for sgtl5000 */
--
2.20.1
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 2 +-
sound/soc/codecs/sgtl5000.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index a2aeb5fb9b537..a8d55c21a5f2d 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1450,7 +1450,7 @@ static int sgtl5000_probe(struct snd_soc_component *component)
/* enable small pop, introduce 400ms delay in turning off */
snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL,
- SGTL5000_SMALL_POP, 1);
+ SGTL5000_SMALL_POP, SGTL5000_SMALL_POP);
/* disable short cut detector */
snd_soc_component_write(component, SGTL5000_CHIP_SHORT_CTRL, 0);
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 18cae08bbd3a6..a4bf4bca95bf7 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -273,7 +273,7 @@
#define SGTL5000_BIAS_CTRL_MASK 0x000e
#define SGTL5000_BIAS_CTRL_SHIFT 1
#define SGTL5000_BIAS_CTRL_WIDTH 3
-#define SGTL5000_SMALL_POP 1
+#define SGTL5000_SMALL_POP 0x0001
/*
* SGTL5000_CHIP_MIC_CTRL
--
2.20.1
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
---
Changes in v4: None
Changes in v3:
- Add the reference to NXP SGTL5000 data sheet to commit message
- Fix multi-line comment format
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 31d546abde717..a04cba66615de 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1328,12 +1328,17 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component)
SGTL5000_INT_OSC_EN);
/* Enable VDDC charge pump */
ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
- } else if (vddio >= 3100 && vdda >= 3100) {
+ } else {
ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
- /* VDDC use VDDIO rail */
- lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
- lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
- SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ /*
+ * if vddio == vdda the source of charge pump should be
+ * assigned manually to VDDIO
+ */
+ if (vddio == vdda) {
+ lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+ lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+ SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ }
}
snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
--
2.20.1
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 0123d9cfcb473..31d546abde717 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1443,6 +1443,7 @@ static int sgtl5000_probe(struct snd_soc_component *component)
int ret;
u16 reg;
struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+ unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN;
/* power up sgtl5000 */
ret = sgtl5000_set_power_regs(component);
@@ -1470,9 +1471,8 @@ static int sgtl5000_probe(struct snd_soc_component *component)
0x1f);
snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
- snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
- SGTL5000_HP_ZCD_EN |
- SGTL5000_ADC_ZCD_EN);
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ zcd_mask, zcd_mask);
snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK,
--
2.20.1
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index a8d55c21a5f2d..0123d9cfcb473 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -710,6 +710,7 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
SGTL5000_CHIP_ANA_ADC_CTRL,
8, 1, 0, capture_6db_attenuate),
SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
+ SOC_SINGLE("Capture Switch", SGTL5000_CHIP_ANA_CTRL, 0, 1, 1),
SOC_DOUBLE_TLV("Headphone Playback Volume",
SGTL5000_CHIP_ANA_HP_CTRL,
--
2.20.1
On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
<[email protected]> wrote:
>
> Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
> reduce coming code size and make it more readable.
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> Reviewed-by: Marcel Ziswiler <[email protected]>
> Reviewed-by: Igor Opaniuk <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
<[email protected]> wrote:
>
> Change VAG power on/off control according to the following algorithm:
> - turn VAG power ON on the 1st incoming event.
> - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
> - turn VAG power OFF when there is the latest consumer's pre-down event
> come.
> - always delay after VAG power OFF to avoid pop.
> - delay after VAG power ON if the initiative consumer is Line-In, this
> prevents pop during line-in muxing.
>
> Also, according to the data sheet [1], to avoid any pops/clicks,
> the outputs should be muted during input/output
> routing changes.
>
> [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> Reviewed-by: Marcel Ziswiler <[email protected]>
> Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Reviewed-by: Fabio Estevam <[email protected]>
By the way, I prefer the description you put in the cover letter as it
explicitly talks about a bug being fixed.
On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
<[email protected]> wrote:
>
> SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
> correct definition makes device probing code more clear.
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> Reviewed-by: Marcel Ziswiler <[email protected]>
> Reviewed-by: Igor Opaniuk <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
<[email protected]> wrote:
>
> This control mute/unmute the ADC input of SGTL5000
> using its CHIP_ANA_CTRL register.
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> Reviewed-by: Marcel Ziswiler <[email protected]>
> Reviewed-by: Igor Opaniuk <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
<[email protected]> wrote:
>
> To enable "zero cross detect" for ADC/HP, change
> HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
> CHIP_ANA_CTRL register.
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> Reviewed-by: Marcel Ziswiler <[email protected]>
> Reviewed-by: Igor Opaniuk <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
<[email protected]> wrote:
>
> If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
> source can be assigned automatically [1].
>
> [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
>
> Signed-off-by: Oleksandr Suvorov <[email protected]>
> Reviewed-by: Marcel Ziswiler <[email protected]>
> Reviewed-by: Igor Opaniuk <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Wed, Jul 17, 2019 at 01:48:43PM -0300, Fabio Estevam wrote:
>On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
><[email protected]> wrote:
>>
>> Change VAG power on/off control according to the following algorithm:
>> - turn VAG power ON on the 1st incoming event.
>> - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
>> - turn VAG power OFF when there is the latest consumer's pre-down event
>> come.
>> - always delay after VAG power OFF to avoid pop.
>> - delay after VAG power ON if the initiative consumer is Line-In, this
>> prevents pop during line-in muxing.
>>
>> Also, according to the data sheet [1], to avoid any pops/clicks,
>> the outputs should be muted during input/output
>> routing changes.
>>
>> [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
>>
>> Signed-off-by: Oleksandr Suvorov <[email protected]>
>> Reviewed-by: Marcel Ziswiler <[email protected]>
>> Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
>
>Reviewed-by: Fabio Estevam <[email protected]>
>
>By the way, I prefer the description you put in the cover letter as it
>explicitly talks about a bug being fixed.
Yes. This patch describes itself as an improvement rather than a fix.
You need to add an explicit stable tag, rather than just cc us.
Something like:
Cc: [email protected]
--
Thanks,
Sasha