From: Peng Fan <[email protected]>
With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
because some pgc domain relies on blk-ctl power domain, so
they need to be added together.
Signed-off-by: Peng Fan <[email protected]>
---
V1:
Depends on the blk-ctl patchset,
https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/
Shawn,
Since the blk-ctl patchset is in good shape and tested, is it ok for
you to pick up?
Thanks
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128 ++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index e7648c3b8390..0e01ff649956 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -7,6 +7,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mm-pinfunc.h"
@@ -609,6 +611,109 @@ src: reset-controller@30390000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mm-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_hsiomix: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+ };
+
+ pgc_pcie: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_PCIE>;
+ power-domains = <&pgc_hsiomix>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
+ };
+
+ pgc_otg1: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_OTG1>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_otg2: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_OTG2>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_gpumix: power-domain@4 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU_AHB>;
+ };
+
+ pgc_gpu: power-domain@5 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_GPU>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU2D_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>;
+ resets = <&src IMX8MQ_RESET_GPU_RESET>;
+ power-domains = <&pgc_gpumix>;
+ };
+
+ pgc_vpumix: power-domain@6 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+ clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+ resets = <&src IMX8MQ_RESET_VPU_RESET>;
+ };
+
+ pgc_vpu_g1: power-domain@7 {
+ #power-domain-cells = <0>;
+ power-domains =
+ <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+ };
+
+ pgc_vpu_g2: power-domain@8 {
+ #power-domain-cells = <0>;
+ power-domains =
+ <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+ clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+ };
+
+ pgc_vpu_h1: power-domain@9 {
+ #power-domain-cells = <0>;
+ power-domains =
+ <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+ clocks = <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+ };
+
+ pgc_dispmix: power-domain@10 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
+ clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+ };
+
+ pgc_mipi: power-domain@11 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_MIPI>;
+ power-domains =
+ <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
@@ -960,6 +1065,18 @@ aips4: bus@32c00000 {
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
+ dispmix_blk_ctl: blk_ctl@32e28000 {
+ compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
+ reg = <0x32e28000 0x100>;
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ power-domains = <&pgc_dispmix>, <&pgc_mipi>;
+ power-domain-names = "dispmix", "mipi";
+ clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+ };
+
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;
@@ -1029,6 +1146,17 @@ gpmi: nand-controller@33002000{
status = "disabled";
};
+ vpumix_blk_ctl: blk-ctl@38330000 {
+ compatible = "fsl,imx8mm-vpumix-blk-ctl", "syscon";
+ reg = <0x38330000 0x100>;
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+ power-domain-names = "vpumix", "vpu-g1", "vpu-g2", "vpu-h1";
+ clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+ <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
--
2.30.0
On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <[email protected]> wrote:
>
> From: Peng Fan <[email protected]>
>
> With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
> because some pgc domain relies on blk-ctl power domain, so
> they need to be added together.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
>
> V1:
> Depends on the blk-ctl patchset,
> https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/
>
> Shawn,
> Since the blk-ctl patchset is in good shape and tested, is it ok for
> you to pick up?
> Thanks
>
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128 ++++++++++++++++++++++
> 1 file changed, 128 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index e7648c3b8390..0e01ff649956 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -7,6 +7,8 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
> #include <dt-bindings/thermal/thermal.h>
>
> #include "imx8mm-pinfunc.h"
> @@ -609,6 +611,109 @@ src: reset-controller@30390000 {
> interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> #reset-cells = <1>;
> };
> +
> + gpc: gpc@303a0000 {
> + compatible = "fsl,imx8mm-gpc";
> + reg = <0x303a0000 0x10000>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> +
> + pgc {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pgc_hsiomix: power-domain@0 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
> + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
> + };
> +
> + pgc_pcie: power-domain@1 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_PCIE>;
> + power-domains = <&pgc_hsiomix>;
> + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
> + };
> +
> + pgc_otg1: power-domain@2 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_OTG1>;
> + power-domains = <&pgc_hsiomix>;
> + };
> +
> + pgc_otg2: power-domain@3 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_OTG2>;
> + power-domains = <&pgc_hsiomix>;
> + };
> +
Any change you could add the references to pgc_otg1 and pgc_otg2 to
their respective OTG nodes? Without them, enabling OTG1 or OTG2 can
result in a hang unless it was started in U-Boot.
> + pgc_gpumix: power-domain@4 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
> + clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MM_CLK_GPU_AHB>;
> + };
> +
> + pgc_gpu: power-domain@5 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_GPU>;
> + clocks = <&clk IMX8MM_CLK_GPU_AHB>,
> + <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> + <&clk IMX8MM_CLK_GPU2D_ROOT>,
> + <&clk IMX8MM_CLK_GPU3D_ROOT>;
> + resets = <&src IMX8MQ_RESET_GPU_RESET>;
> + power-domains = <&pgc_gpumix>;
> + };
> +
> + pgc_vpumix: power-domain@6 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
> + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
> + resets = <&src IMX8MQ_RESET_VPU_RESET>;
> + };
> +
> + pgc_vpu_g1: power-domain@7 {
> + #power-domain-cells = <0>;
> + power-domains =
> + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> + reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
> + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
> + };
> +
> + pgc_vpu_g2: power-domain@8 {
> + #power-domain-cells = <0>;
> + power-domains =
> + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> + reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
> + clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
> + };
> +
> + pgc_vpu_h1: power-domain@9 {
> + #power-domain-cells = <0>;
> + power-domains =
> + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> + reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
> + clocks = <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> + };
> +
> + pgc_dispmix: power-domain@10 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
> + clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> + <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> + };
> +
> + pgc_mipi: power-domain@11 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MM_POWER_DOMAIN_MIPI>;
> + power-domains =
> + <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> + };
> + };
> + };
> };
>
> aips2: bus@30400000 {
> @@ -960,6 +1065,18 @@ aips4: bus@32c00000 {
> #size-cells = <1>;
> ranges = <0x32c00000 0x32c00000 0x400000>;
>
> + dispmix_blk_ctl: blk_ctl@32e28000 {
> + compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> + reg = <0x32e28000 0x100>;
> + #power-domain-cells = <1>;
> + #reset-cells = <1>;
> + power-domains = <&pgc_dispmix>, <&pgc_mipi>;
> + power-domain-names = "dispmix", "mipi";
> + clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> + <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> + <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> + };
> +
> usbotg1: usb@32e40000 {
> compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
> reg = <0x32e40000 0x200>;
> @@ -1029,6 +1146,17 @@ gpmi: nand-controller@33002000{
> status = "disabled";
> };
>
> + vpumix_blk_ctl: blk-ctl@38330000 {
> + compatible = "fsl,imx8mm-vpumix-blk-ctl", "syscon";
> + reg = <0x38330000 0x100>;
> + #power-domain-cells = <1>;
> + #reset-cells = <1>;
> + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
> + power-domain-names = "vpumix", "vpu-g1", "vpu-g2", "vpu-h1";
> + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
> + <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> + };
> +
> gic: interrupt-controller@38800000 {
> compatible = "arm,gic-v3";
> reg = <0x38800000 0x10000>, /* GIC Dist */
> --
> 2.30.0
>
Hi Adam,
On Tue, Jun 29, 2021 at 10:36 AM Adam Ford <[email protected]> wrote:
> Any change you could add the references to pgc_otg1 and pgc_otg2 to
> their respective OTG nodes? Without them, enabling OTG1 or OTG2 can
> result in a hang unless it was started in U-Boot.
There is a patch from Lucas doing that:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
Cheers
> Subject: Re: [PATCH] arm64: dts: imx8mm: add pgc/blk_ctl nodes
>
> On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <[email protected]>
> wrote:
> >
> > From: Peng Fan <[email protected]>
> >
> > With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes,
> > because some pgc domain relies on blk-ctl power domain, so they need
> > to be added together.
> >
> > Signed-off-by: Peng Fan <[email protected]>
> > ---
> >
> > V1:
> > Depends on the blk-ctl patchset,
> >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202105221342
> 49
> > .15322-1-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpeng.fan%
> 40nxp.c
> >
> om%7C388c4bd417ff49d393c708d93b02e9f9%7C686ea1d3bc2b4c6fa92cd99
> c5c3016
> >
> 35%7C0%7C0%7C637605705985073021%7CUnknown%7CTWFpbGZsb3d8ey
> JWIjoiMC4wLj
> >
> AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&
> ;sdata=
> >
> osAlqXkaxQ8qexwmd%2Fh33V0tUpVnT%2Fk7B5kq5vgVRVQ%3D&reser
> ved=0
> >
> > Shawn,
> > Since the blk-ctl patchset is in good shape and tested, is it ok for
> > you to pick up?
> > Thanks
> >
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128
> > ++++++++++++++++++++++
> > 1 file changed, 128 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index e7648c3b8390..0e01ff649956 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -7,6 +7,8 @@
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/input/input.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/power/imx8mm-power.h>
> > +#include <dt-bindings/reset/imx8mq-reset.h>
> > #include <dt-bindings/thermal/thermal.h>
> >
> > #include "imx8mm-pinfunc.h"
> > @@ -609,6 +611,109 @@ src: reset-controller@30390000 {
> > interrupts = <GIC_SPI 89
> IRQ_TYPE_LEVEL_HIGH>;
> > #reset-cells = <1>;
> > };
> > +
> > + gpc: gpc@303a0000 {
> > + compatible = "fsl,imx8mm-gpc";
> > + reg = <0x303a0000 0x10000>;
> > + interrupts = <GIC_SPI 87
> IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-parent = <&gic>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > +
> > + pgc {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pgc_hsiomix:
> power-domain@0 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_HSIOMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_USB1_CTRL_ROOT>;
> > + };
> > +
> > + pgc_pcie:
> power-domain@1 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_PCIE>;
> > + power-domains
> = <&pgc_hsiomix>;
> > + clocks = <&clk
> IMX8MM_CLK_PCIE1_ROOT>;
> > + };
> > +
> > + pgc_otg1:
> power-domain@2 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_OTG1>;
> > + power-domains
> = <&pgc_hsiomix>;
> > + };
> > +
> > + pgc_otg2:
> power-domain@3 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_OTG2>;
> > + power-domains
> = <&pgc_hsiomix>;
> > + };
> > +
>
> Any change you could add the references to pgc_otg1 and pgc_otg2 to their
> respective OTG nodes? Without them, enabling OTG1 or OTG2 can result in a
> hang unless it was started in U-Boot.
Will post v2 to add that, really hope the driver part could be in, then move on.
Thanks,
Peng.
>
> > + pgc_gpumix:
> power-domain@4 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_GPUMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_GPU_BUS_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU_AHB>;
> > + };
> > +
> > + pgc_gpu:
> power-domain@5 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_GPU>;
> > + clocks = <&clk
> IMX8MM_CLK_GPU_AHB>,
> > +
> <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU2D_ROOT>,
> > +
> <&clk IMX8MM_CLK_GPU3D_ROOT>;
> > + resets = <&src
> IMX8MQ_RESET_GPU_RESET>;
> > + power-domains
> = <&pgc_gpumix>;
> > + };
> > +
> > + pgc_vpumix:
> power-domain@6 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_DEC_ROOT>;
> > + resets = <&src
> IMX8MQ_RESET_VPU_RESET>;
> > + };
> > +
> > + pgc_vpu_g1:
> power-domain@7 {
> > +
> #power-domain-cells = <0>;
> > + power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUG1>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_G1_ROOT>;
> > + };
> > +
> > + pgc_vpu_g2:
> power-domain@8 {
> > +
> #power-domain-cells = <0>;
> > + power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUG2>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_G2_ROOT>;
> > + };
> > +
> > + pgc_vpu_h1:
> power-domain@9 {
> > +
> #power-domain-cells = <0>;
> > + power-domains
> =
> > +
> <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_VPUH1>;
> > + clocks = <&clk
> IMX8MM_CLK_VPU_H1_ROOT>;
> > + };
> > +
> > + pgc_dispmix:
> power-domain@10 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_DISPMIX>;
> > + clocks = <&clk
> IMX8MM_CLK_DISP_ROOT>,
> > +
> <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> > +
> <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> > + };
> > +
> > + pgc_mipi:
> power-domain@11 {
> > +
> #power-domain-cells = <0>;
> > + reg =
> <IMX8MM_POWER_DOMAIN_MIPI>;
> > + power-domains
> =
> > +
> <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> > + };
> > + };
> > + };
> > };
> >
> > aips2: bus@30400000 {
> > @@ -960,6 +1065,18 @@ aips4: bus@32c00000 {
> > #size-cells = <1>;
> > ranges = <0x32c00000 0x32c00000
> 0x400000>;
> >
> > + dispmix_blk_ctl: blk_ctl@32e28000 {
> > + compatible =
> "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> > + reg = <0x32e28000 0x100>;
> > + #power-domain-cells = <1>;
> > + #reset-cells = <1>;
> > + power-domains = <&pgc_dispmix>,
> <&pgc_mipi>;
> > + power-domain-names = "dispmix",
> "mipi";
> > + clocks = <&clk
> IMX8MM_CLK_DISP_ROOT>,
> > + <&clk
> IMX8MM_CLK_DISP_AXI_ROOT>,
> > + <&clk
> IMX8MM_CLK_DISP_APB_ROOT>;
> > + };
> > +
> > usbotg1: usb@32e40000 {
> > compatible = "fsl,imx8mm-usb",
> "fsl,imx7d-usb";
> > reg = <0x32e40000 0x200>; @@
> -1029,6
> > +1146,17 @@ gpmi: nand-controller@33002000{
> > status = "disabled";
> > };
> >
> > + vpumix_blk_ctl: blk-ctl@38330000 {
> > + compatible = "fsl,imx8mm-vpumix-blk-ctl",
> "syscon";
> > + reg = <0x38330000 0x100>;
> > + #power-domain-cells = <1>;
> > + #reset-cells = <1>;
> > + power-domains = <&pgc_vpumix>,
> <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>;
> > + power-domain-names = "vpumix", "vpu-g1",
> "vpu-g2", "vpu-h1";
> > + clocks = <&clk
> IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>,
> > + <&clk
> IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>;
> > + };
> > +
> > gic: interrupt-controller@38800000 {
> > compatible = "arm,gic-v3";
> > reg = <0x38800000 0x10000>, /* GIC Dist */
> > --
> > 2.30.0
> >