From: Lucas Stach <[email protected]>
Add binding for the i.MX8MP HDMI parallel video interface block.
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
V5: I tried to help move this along, so I took Lucas' patch and
attempted to apply fixes based on feedback. I don't have
all the history, so apologies for that.
Removed the pipe character from the Description.
Increased the register size from 0x40 to 0x44.
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 000000000000..3377f152f319
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+ - Lucas Stach <[email protected]>
+
+description:
+ The HDMI parallel video interface is a timing and sync generator block in the
+ i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+ compatible:
+ const: fsl,imx8mp-hdmi-pvi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input from the LCDIF controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output to the HDMI TX controller.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/imx8mp-power.h>
+
+ display-bridge@32fc4000 {
+ compatible = "fsl,imx8mp-hdmi-pvi";
+ reg = <0x32fc4000 0x44>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pvi_from_lcdif3: endpoint {
+ remote-endpoint = <&lcdif3_to_pvi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pvi_to_hdmi_tx: endpoint {
+ remote-endpoint = <&hdmi_tx_from_pvi>;
+ };
+ };
+ };
+ };
--
2.43.0
From: Lucas Stach <[email protected]>
This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]> (v2)
Tested-by: Marek Vasut <[email protected]> (v1)
Tested-by: Luca Ceresoli <[email protected]> (v2)
Tested-by: Richard Leitner <[email protected]> (v2)
Tested-by: Frieder Schrempf <[email protected]> (v2)
Reviewed-by: Laurent Pinchart <[email protected]> (v3)
Reviewed-by: Luca Ceresoli <[email protected]>
Tested-by: Luca Ceresoli <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
Signed-off-by: Adam Ford <[email protected]>
---
V5: I (Adam) tried to help move this along, so I took Lucas' patch and
attempted to apply fixes based on feedback. I don't have
all the history, so apologies for that.
No changes from V4 to V5
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 5a4f3d58501e..a4d13331e320 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -3,6 +3,13 @@ if ARCH_MXC || COMPILE_TEST
config DRM_IMX_LDB_HELPER
tristate
+config DRM_IMX8MP_HDMI_PVI
+ tristate "Freescale i.MX8MP HDMI PVI bridge support"
+ depends on OF
+ help
+ Choose this to enable support for the internal HDMI TX Parallel
+ Video Interface found on the Freescale i.MX8MP SoC.
+
config DRM_IMX8QM_LDB
tristate "Freescale i.MX8QM LVDS display bridge"
depends on OF
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index 2b0c2e44aa1b..e2c2106509fa 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_DRM_IMX_LDB_HELPER) += imx-ldb-helper.o
+obj-$(CONFIG_DRM_IMX8MP_HDMI_PVI) += imx8mp-hdmi-pvi.o
obj-$(CONFIG_DRM_IMX8QM_LDB) += imx8qm-ldb.o
obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o
obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c
new file mode 100644
index 000000000000..9efe051a1e31
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-pvi.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2022 Pengutronix, Lucas Stach <[email protected]>
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <linux/bitfield.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
+
+#define HTX_PVI_CTRL 0x0
+#define PVI_CTRL_OP_VSYNC_POL BIT(18)
+#define PVI_CTRL_OP_HSYNC_POL BIT(17)
+#define PVI_CTRL_OP_DE_POL BIT(16)
+#define PVI_CTRL_INP_VSYNC_POL BIT(14)
+#define PVI_CTRL_INP_HSYNC_POL BIT(13)
+#define PVI_CTRL_INP_DE_POL BIT(12)
+#define PVI_CTRL_MODE_MASK GENMASK(2, 1)
+#define PVI_CTRL_MODE_LCDIF 2
+#define PVI_CTRL_EN BIT(0)
+
+struct imx8mp_hdmi_pvi {
+ struct drm_bridge bridge;
+ struct device *dev;
+ struct drm_bridge *next_bridge;
+ void __iomem *regs;
+};
+
+static inline struct imx8mp_hdmi_pvi *
+to_imx8mp_hdmi_pvi(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct imx8mp_hdmi_pvi, bridge);
+}
+
+static int imx8mp_hdmi_pvi_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);
+
+ return drm_bridge_attach(bridge->encoder, pvi->next_bridge,
+ bridge, flags);
+}
+
+static void imx8mp_hdmi_pvi_bridge_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state)
+{
+ struct drm_atomic_state *state = bridge_state->base.state;
+ struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);
+ struct drm_connector_state *conn_state;
+ const struct drm_display_mode *mode;
+ struct drm_crtc_state *crtc_state;
+ struct drm_connector *connector;
+ u32 bus_flags, val;
+
+ connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
+ conn_state = drm_atomic_get_new_connector_state(state, connector);
+ crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
+
+ if (WARN_ON(pm_runtime_resume_and_get(pvi->dev)))
+ return;
+
+ mode = &crtc_state->adjusted_mode;
+
+ val = FIELD_PREP(PVI_CTRL_MODE_MASK, PVI_CTRL_MODE_LCDIF) | PVI_CTRL_EN;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ val |= PVI_CTRL_OP_VSYNC_POL | PVI_CTRL_INP_VSYNC_POL;
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ val |= PVI_CTRL_OP_HSYNC_POL | PVI_CTRL_INP_HSYNC_POL;
+
+ if (pvi->next_bridge->timings)
+ bus_flags = pvi->next_bridge->timings->input_bus_flags;
+ else if (bridge_state)
+ bus_flags = bridge_state->input_bus_cfg.flags;
+
+ if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
+ val |= PVI_CTRL_OP_DE_POL | PVI_CTRL_INP_DE_POL;
+
+ writel(val, pvi->regs + HTX_PVI_CTRL);
+}
+
+static void imx8mp_hdmi_pvi_bridge_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state)
+{
+ struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);
+
+ writel(0x0, pvi->regs + HTX_PVI_CTRL);
+
+ pm_runtime_put(pvi->dev);
+}
+
+static u32 *
+imx8mp_hdmi_pvi_bridge_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ struct imx8mp_hdmi_pvi *pvi = to_imx8mp_hdmi_pvi(bridge);
+ struct drm_bridge *next_bridge = pvi->next_bridge;
+ struct drm_bridge_state *next_state;
+
+ if (!next_bridge->funcs->atomic_get_input_bus_fmts)
+ return 0;
+
+ next_state = drm_atomic_get_new_bridge_state(crtc_state->state,
+ next_bridge);
+
+ return next_bridge->funcs->atomic_get_input_bus_fmts(next_bridge,
+ next_state,
+ crtc_state,
+ conn_state,
+ output_fmt,
+ num_input_fmts);
+}
+
+static const struct drm_bridge_funcs imx_hdmi_pvi_bridge_funcs = {
+ .attach = imx8mp_hdmi_pvi_bridge_attach,
+ .atomic_enable = imx8mp_hdmi_pvi_bridge_enable,
+ .atomic_disable = imx8mp_hdmi_pvi_bridge_disable,
+ .atomic_get_input_bus_fmts = imx8mp_hdmi_pvi_bridge_get_input_bus_fmts,
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+};
+
+static int imx8mp_hdmi_pvi_probe(struct platform_device *pdev)
+{
+ struct device_node *remote;
+ struct imx8mp_hdmi_pvi *pvi;
+
+ pvi = devm_kzalloc(&pdev->dev, sizeof(*pvi), GFP_KERNEL);
+ if (!pvi)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pvi);
+ pvi->dev = &pdev->dev;
+
+ pvi->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pvi->regs))
+ return PTR_ERR(pvi->regs);
+
+ /* Get the next bridge in the pipeline. */
+ remote = of_graph_get_remote_node(pdev->dev.of_node, 1, -1);
+ if (!remote)
+ return -EINVAL;
+
+ pvi->next_bridge = of_drm_find_bridge(remote);
+ of_node_put(remote);
+
+ if (!pvi->next_bridge)
+ return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
+ "could not find next bridge\n");
+
+ pm_runtime_enable(&pdev->dev);
+
+ /* Register the bridge. */
+ pvi->bridge.funcs = &imx_hdmi_pvi_bridge_funcs;
+ pvi->bridge.of_node = pdev->dev.of_node;
+ pvi->bridge.timings = pvi->next_bridge->timings;
+
+ drm_bridge_add(&pvi->bridge);
+
+ return 0;
+}
+
+static int imx8mp_hdmi_pvi_remove(struct platform_device *pdev)
+{
+ struct imx8mp_hdmi_pvi *pvi = platform_get_drvdata(pdev);
+
+ drm_bridge_remove(&pvi->bridge);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id imx8mp_hdmi_pvi_match[] = {
+ {
+ .compatible = "fsl,imx8mp-hdmi-pvi",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, imx8mp_hdmi_pvi_match);
+
+static struct platform_driver imx8mp_hdmi_pvi_driver = {
+ .probe = imx8mp_hdmi_pvi_probe,
+ .remove = imx8mp_hdmi_pvi_remove,
+ .driver = {
+ .name = "imx-hdmi-pvi",
+ .of_match_table = imx8mp_hdmi_pvi_match,
+ },
+};
+module_platform_driver(imx8mp_hdmi_pvi_driver);
+
+MODULE_DESCRIPTION("i.MX8MP HDMI TX Parallel Video Interface bridge driver");
+MODULE_LICENSE("GPL");
--
2.43.0
Hi Adam,
Thanks for moving this forward.
On Fri, Jan 5, 2024 at 10:56 PM Adam Ford <[email protected]> wrote:
>
> From: Lucas Stach <[email protected]>
>
> Add binding for the i.MX8MP HDMI parallel video interface block.
>
> Signed-off-by: Lucas Stach <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
You missed your own Signed-off-by tag.
Hello Adam,
On Fri, Jan 05, 2024 at 07:56:21PM -0600, Adam Ford wrote:
> From: Lucas Stach <[email protected]>
>
> Add binding for the i.MX8MP HDMI parallel video interface block.
>
> Signed-off-by: Lucas Stach <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
Without looking at the patch's content: This lacks a Signed-off line by
you.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |