Hi Adam and devicetree folks,
On Thu, Aug 31, 2023 at 1:44 AM Adam Ford <[email protected]> wrote:
>
> The i.MX8MP has a micfil controller which is used for interfacing
> with a pulse density microphone. Add the node and mark it as
> disabled by default.
>
> Signed-off-by: Adam Ford <[email protected]>
> ---
> V3: The AUDIOMIX_PDM_ROOT doesn't exist and the real clock is
> called IMX8MP_CLK_AUDIOMIX_PDM_SEL, so swap it out.
>
> V2: No change
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 3167706d81e1..341fd0369ce9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1479,6 +1479,27 @@ easrc: easrc@30c90000 {
> fsl,asrc-format = <2>;
> status = "disabled";
> };
> +
> + micfil: audio-controller@30ca0000 {
> + compatible = "fsl,imx8mp-micfil";
> + reg = <0x30ca0000 0x10000>;
> + #sound-dai-cells = <0>;
After this patch, the following schema warning is seen:
imx8mp-beacon-kit.dtb: audio-controller@30ca0000: '#sound-dai-cells'
does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
What is the correct way to solve this?
- Document #sound-dai-cells in fsl,micfil.yaml as an optional property
- Remove #sound-dai-cells from imx8mp.dtsi
- Document #sound-dai-cells in fsl,micfil.yaml as a required property
and pass #sound-dai-cells to imx8mm/imx8mn/imx83.dtsi?
On Tue, Oct 3, 2023 at 8:12 PM Fabio Estevam <[email protected]> wrote:
>
> Hi Adam and devicetree folks,
>
> On Thu, Aug 31, 2023 at 1:44 AM Adam Ford <[email protected]> wrote:
> >
> > The i.MX8MP has a micfil controller which is used for interfacing
> > with a pulse density microphone. Add the node and mark it as
> > disabled by default.
> >
> > Signed-off-by: Adam Ford <[email protected]>
> > ---
> > V3: The AUDIOMIX_PDM_ROOT doesn't exist and the real clock is
> > called IMX8MP_CLK_AUDIOMIX_PDM_SEL, so swap it out.
> >
> > V2: No change
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 3167706d81e1..341fd0369ce9 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1479,6 +1479,27 @@ easrc: easrc@30c90000 {
> > fsl,asrc-format = <2>;
> > status = "disabled";
> > };
> > +
> > + micfil: audio-controller@30ca0000 {
> > + compatible = "fsl,imx8mp-micfil";
> > + reg = <0x30ca0000 0x10000>;
> > + #sound-dai-cells = <0>;
>
> After this patch, the following schema warning is seen:
>
> imx8mp-beacon-kit.dtb: audio-controller@30ca0000: '#sound-dai-cells'
> does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
>
> What is the correct way to solve this?
>
> - Document #sound-dai-cells in fsl,micfil.yaml as an optional property
> - Remove #sound-dai-cells from imx8mp.dtsi
> - Document #sound-dai-cells in fsl,micfil.yaml as a required property
> and pass #sound-dai-cells to imx8mm/imx8mn/imx83.dtsi?
I am not an expert on yaml, in fact they quite confuse me, but I
believe the proper solution is likely to document them in the yaml.
When I built the device tree without the sound-dai-cells, it threw a
message indicating that it needed to be there when it is configured to
operate. I didn't see the schema warning that you noted, but my
schema could have been out of date. Looking at the sai nodes and the
yaml file, it appears that the sound-dai-cells is listed in the yaml.
adam