Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revg%2003222018%20plus.pdf
Testing done on Mikrotik Routerboard RB450Gx4 board under 4.19.19 kernel.
Test board does not support Dual or Quad modes.
Signed-off-by: Robert Marko <[email protected]>
---
drivers/mtd/spi-nor/spi-nor.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 6e13bbd1aaa5..0e958f48db1b 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1975,6 +1975,11 @@ static const struct flash_info spi_nor_ids[] = {
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
+ {
+ "w25q16jv", INFO(0xef7015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
--
2.20.1
Hi, Robert,
On 02/14/2019 10:57 PM, Robert Marko wrote:
> Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revg%2003222018%20plus.pdf
>
> Testing done on Mikrotik Routerboard RB450Gx4 board under 4.19.19 kernel.
It is preferable to do the test on spi-nor/next
>
> Test board does not support Dual or Quad modes.
>
> Signed-off-by: Robert Marko <[email protected]>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 6e13bbd1aaa5..0e958f48db1b 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1975,6 +1975,11 @@ static const struct flash_info spi_nor_ids[] = {
> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> },
> + {
> + "w25q16jv", INFO(0xef7015, 0, 64 * 1024, 32,
> + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
You'll need a way to differentiate between W25Q16JV-IQ/JQ and W25Q16JV-IM/JM.
And I would prefer to have the new entries ordered alphabetically as much as
possible. This one should fit just before w25q20cl. Manufacturers are naming
flashes based on a product identification system. The flashes are presented in
alphabetical order, we should do the same.
Cheers,
ta
On Wed, 20 Feb 2019 at 21:29, <[email protected]> wrote:>>
Hi, Robert,>> On 02/14/2019 10:57 PM, Robert Marko wrote:> >
Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revg%2003222018%20plus.pdf>
>> > Testing done on Mikrotik Routerboard RB450Gx4 board under 4.19.19
kernel.>> It is preferable to do the test on spi-nor/nextUnfortunately
I cant do that as OpenWrt has a considerable amount of patches that
would need to be ported and we are only moving from LTS to LTS version
and we are currently on 4.19.
> >
> > Test board does not support Dual or Quad modes.
> >
> > Signed-off-by: Robert Marko <[email protected]>
> > ---
> > drivers/mtd/spi-nor/spi-nor.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> > index 6e13bbd1aaa5..0e958f48db1b 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -1975,6 +1975,11 @@ static const struct flash_info spi_nor_ids[] = {
> > SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> > SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> > },
> > + {
> > + "w25q16jv", INFO(0xef7015, 0, 64 * 1024, 32,
> > + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> > + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>
> You'll need a way to differentiate between W25Q16JV-IQ/JQ and W25Q16JV-IM/JM.
Hm, from what I understood JV is the series and suffix only indictes
the package.
They should all have the same JEDEC ID and features.
>
> And I would prefer to have the new entries ordered alphabetically as much as
> possible. This one should fit just before w25q20cl. Manufacturers are naming
> flashes based on a product identification system. The flashes are presented in
> alphabetical order, we should do the same.
I agree, will reorder and send a v2.
>
> Cheers,
> ta
Hi, Robert,
On 02/21/2019 10:58 PM, Robert Marko wrote:
> On Wed, 20 Feb 2019 at 21:29, <[email protected]> wrote:>>
> Hi, Robert,>> On 02/14/2019 10:57 PM, Robert Marko wrote:> >
> Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revg%2003222018%20plus.pdf>
>>>> Testing done on Mikrotik Routerboard RB450Gx4 board under 4.19.19
> kernel.>> It is preferable to do the test on spi-nor/nextUnfortunately
> I cant do that as OpenWrt has a considerable amount of patches that
> would need to be ported and we are only moving from LTS to LTS version
> and we are currently on 4.19.
>>>
>>> Test board does not support Dual or Quad modes.
>>>
>>> Signed-off-by: Robert Marko <[email protected]>
>>> ---
>>> drivers/mtd/spi-nor/spi-nor.c | 5 +++++
>>> 1 file changed, 5 insertions(+)
>>>
>>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>>> index 6e13bbd1aaa5..0e958f48db1b 100644
>>> --- a/drivers/mtd/spi-nor/spi-nor.c
>>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>>> @@ -1975,6 +1975,11 @@ static const struct flash_info spi_nor_ids[] = {
>>> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>>> SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>>> },
>>> + {
>>> + "w25q16jv", INFO(0xef7015, 0, 64 * 1024, 32,
>>> + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>>> + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>>
>> You'll need a way to differentiate between W25Q16JV-IQ/JQ and W25Q16JV-IM/JM.
> Hm, from what I understood JV is the series and suffix only indictes
> the package.
> They should all have the same JEDEC ID and features.
>>
W25Q16JV-IQ/JQ and W25Q16JV-IM/JM have different jedec ids, see table "9.1.1
Manufacturer and Device Identification" from the datasheet that you indicated in
the commit message.
Looking at "12. ORDERING INFORMATION", I see that:
- Q version has QE = 1 (fixed) and it's backward compatible to FV family
- M version has QE = 0 (programmable) and has a new device ID
The same is described in "8. QUAD ENABLE (QE) – Volatile/Non-Volatile Writable".
I would suggest to name the flash "w25q16jv-im/jm".
What do you think?
ta