Reconcile devices.txt with serial/ucc_uart.c regarding device number
assignments. ucc_uart.c supports 4 ports and uses minor devnums
46-49, so update devices.txt with that info.
Then update ucc_uart.c's reference to the location of the devices.txt
list in the kernel source tree.
Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
---
Documentation/admin-guide/devices.txt | 2 +-
drivers/tty/serial/ucc_uart.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff -- a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -59,7 +59,7 @@ static int firmware_loaded;
/* #define LOOPBACK */
/* The major and minor device numbers are defined in
- * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
+ * Documentation/admin-guide/devices.txt. For the QE
* UART, we have major number 204 and minor numbers 46 - 49, which are the
* same as for the CPM2. This decision was made because no Freescale part
* has both a CPM and a QE.
diff -- a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -2691,7 +2691,7 @@
45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
...
- 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
+ 49 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 3
50 = /dev/ttyIOC0 Altix serial card
...
81 = /dev/ttyIOC31 Altix serial card
On Sun, Jul 23, 2023 at 11:33:41PM -0700, Randy Dunlap wrote:
> Reconcile devices.txt with serial/ucc_uart.c regarding device number
> assignments. ucc_uart.c supports 4 ports and uses minor devnums
> 46-49, so update devices.txt with that info.
> Then update ucc_uart.c's reference to the location of the devices.txt
> list in the kernel source tree.
>
> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Signed-off-by: Randy Dunlap <[email protected]>
> Cc: Timur Tabi <[email protected]>
> Cc: Kumar Gala <[email protected]>
> Cc: [email protected]
> Cc: Greg Kroah-Hartman <[email protected]>
> Cc: Jiri Slaby <[email protected]>
> Cc: [email protected]
> Cc: Jonathan Corbet <[email protected]>
> Cc: [email protected]
> ---
> Documentation/admin-guide/devices.txt | 2 +-
> drivers/tty/serial/ucc_uart.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
Very nice, thanks for catching this, I'll go queue it up.
Actually, how did you notice this? I don't think the devices.txt file
is up to date at all anymore, and odds are, other things are wrong in it
too.
thanks,
greg k-h
On 7/25/23 10:27, Greg Kroah-Hartman wrote:
> On Sun, Jul 23, 2023 at 11:33:41PM -0700, Randy Dunlap wrote:
>> Reconcile devices.txt with serial/ucc_uart.c regarding device number
>> assignments. ucc_uart.c supports 4 ports and uses minor devnums
>> 46-49, so update devices.txt with that info.
>> Then update ucc_uart.c's reference to the location of the devices.txt
>> list in the kernel source tree.
>>
>> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
>> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>> Signed-off-by: Randy Dunlap <[email protected]>
>> Cc: Timur Tabi <[email protected]>
>> Cc: Kumar Gala <[email protected]>
>> Cc: [email protected]
>> Cc: Greg Kroah-Hartman <[email protected]>
>> Cc: Jiri Slaby <[email protected]>
>> Cc: [email protected]
>> Cc: Jonathan Corbet <[email protected]>
>> Cc: [email protected]
>> ---
>> Documentation/admin-guide/devices.txt | 2 +-
>> drivers/tty/serial/ucc_uart.c | 2 +-
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> Very nice, thanks for catching this, I'll go queue it up.
>
> Actually, how did you notice this? I don't think the devices.txt file
> is up to date at all anymore, and odds are, other things are wrong in it
> too.
I accidentally! saw some reference to lanana.org in the kernel source code
and just grepped for that and saw this...
--
~Randy
On Mon, Jul 24, 2023 at 1:33 AM Randy Dunlap <[email protected]> wrote:
>
> Reconcile devices.txt with serial/ucc_uart.c regarding device number
> assignments. ucc_uart.c supports 4 ports and uses minor devnums
> 46-49, so update devices.txt with that info.
> Then update ucc_uart.c's reference to the location of the devices.txt
> list in the kernel source tree.
>
> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Signed-off-by: Randy Dunlap <[email protected]>
> Cc: Timur Tabi <[email protected]>
> Cc: Kumar Gala <[email protected]>
> Cc: [email protected]
> Cc: Greg Kroah-Hartman <[email protected]>
> Cc: Jiri Slaby <[email protected]>
> Cc: [email protected]
> Cc: Jonathan Corbet <[email protected]>
> Cc: [email protected]
Acked-by: Timur Tabi <[email protected]>
One thing does concern me. The UCC UART driver piggy-backs on the CPM
driver's layout (see cpm_uart.h), but apparently CPM UART supports 6
devices, not four:
#define UART_NR fs_uart_nr
where fs_uart_nr is defined in enum fs_uart_id.
Unfortunately, it's been so long since I've touched this code, I'm not
sure whether this means anything.
On 7/25/23 13:38, Timur Tabi wrote:
> On Mon, Jul 24, 2023 at 1:33 AM Randy Dunlap <[email protected]> wrote:
>>
>> Reconcile devices.txt with serial/ucc_uart.c regarding device number
>> assignments. ucc_uart.c supports 4 ports and uses minor devnums
>> 46-49, so update devices.txt with that info.
>> Then update ucc_uart.c's reference to the location of the devices.txt
>> list in the kernel source tree.
>>
>> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
>> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>> Signed-off-by: Randy Dunlap <[email protected]>
>> Cc: Timur Tabi <[email protected]>
>> Cc: Kumar Gala <[email protected]>
>> Cc: [email protected]
>> Cc: Greg Kroah-Hartman <[email protected]>
>> Cc: Jiri Slaby <[email protected]>
>> Cc: [email protected]
>> Cc: Jonathan Corbet <[email protected]>
>> Cc: [email protected]
>
> Acked-by: Timur Tabi <[email protected]>
>
> One thing does concern me. The UCC UART driver piggy-backs on the CPM
> driver's layout (see cpm_uart.h), but apparently CPM UART supports 6
> devices, not four:
>
> #define UART_NR fs_uart_nr
>
> where fs_uart_nr is defined in enum fs_uart_id.
>
> Unfortunately, it's been so long since I've touched this code, I'm not
> sure whether this means anything.
If CPM UART code ever worked with > 4 ports, it probably just used minor devnums
that were not allocated to it.
Also, it looks like the CPU UART part of Documentation/admin-guide/devices.txt
needs to be updated:
46 = /dev/cucpm0 Callout device for ttyCPM0
...
49 = /dev/cucpm5 Callout device for ttyCPM5
The driver must use some tricks to get 6 ports into 4 devnums. :)
--
~Randy
Le 24/07/2023 à 08:33, Randy Dunlap a écrit :
> Reconcile devices.txt with serial/ucc_uart.c regarding device number
> assignments. ucc_uart.c supports 4 ports and uses minor devnums
> 46-49, so update devices.txt with that info.
> Then update ucc_uart.c's reference to the location of the devices.txt
> list in the kernel source tree.
Devices ttyCPM* belong to cpm_uart driver. As explained in the comment
you have modified in UCC uart driver, UCC uart borrows those devices and
shall not be considered as the reference. But the lines you modify in
device.txt doesn't mention QE UCC, it mentions CPM SCC and CPM SMC.
CPM uart driver supports up to 6 ports (4 SCC and 2 SMC).
On one of my boards which has a powerpc mpc866 CPU, I have:
[ 2.393872] ff000a80.serial: ttyCPM0 at MMIO 0xfff00a80 (irq = 19,
base_baud = 8250000) is a CPM UART
[ 2.411899] ff000a90.serial: ttyCPM1 at MMIO 0xfff00a90 (irq = 20,
base_baud = 8250000) is a CPM UART
[ 2.430352] ff000a00.serial: ttyCPM2 at MMIO 0xfff00a00 (irq = 30,
base_baud = 8250000) is a CPM UART
[ 2.448944] ff000a20.serial: ttyCPM3 at MMIO 0xfff00a20 (irq = 29,
base_baud = 8250000) is a CPM UART
[ 2.467435] ff000a40.serial: ttyCPM4 at MMIO 0xfff00a40 (irq = 28,
base_baud = 8250000) is a CPM UART
[ 2.485924] ff000a60.serial: ttyCPM5 at MMIO 0xfff00a60 (irq = 27,
base_baud = 8250000) is a CPM UART
# ll /dev/ttyCPM*
crw------- 1 root root 204, 46 Jan 1 01:01 /dev/ttyCPM0
crw------- 1 root root 204, 47 Jan 1 01:00 /dev/ttyCPM1
crw------- 1 root root 204, 48 Jan 1 01:00 /dev/ttyCPM2
crw------- 1 root root 204, 49 Jan 1 01:00 /dev/ttyCPM3
crw------- 1 root root 204, 50 Jan 1 01:00 /dev/ttyCPM4
crw------- 1 root root 204, 51 Jan 1 01:00 /dev/ttyCPM5
# cat /proc/tty/drivers
/dev/tty /dev/tty 5 0 system:/dev/tty
/dev/console /dev/console 5 1 system:console
/dev/ptmx /dev/ptmx 5 2 system
ttyCPM /dev/ttyCPM 204 46-51 serial
pty_slave /dev/pts 136 0-1048575 pty:slave
pty_master /dev/ptm 128 0-1048575 pty:master
pty_slave /dev/ttyp 3 0-4 pty:slave
pty_master /dev/pty 2 0-4 pty:master
Christophe
>
> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Signed-off-by: Randy Dunlap <[email protected]>
> Cc: Timur Tabi <[email protected]>
> Cc: Kumar Gala <[email protected]>
> Cc: [email protected]
> Cc: Greg Kroah-Hartman <[email protected]>
> Cc: Jiri Slaby <[email protected]>
> Cc: [email protected]
> Cc: Jonathan Corbet <[email protected]>
> Cc: [email protected]
> ---
> Documentation/admin-guide/devices.txt | 2 +-
> drivers/tty/serial/ucc_uart.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff -- a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
> --- a/drivers/tty/serial/ucc_uart.c
> +++ b/drivers/tty/serial/ucc_uart.c
> @@ -59,7 +59,7 @@ static int firmware_loaded;
> /* #define LOOPBACK */
>
> /* The major and minor device numbers are defined in
> - * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
> + * Documentation/admin-guide/devices.txt. For the QE
> * UART, we have major number 204 and minor numbers 46 - 49, which are the
> * same as for the CPM2. This decision was made because no Freescale part
> * has both a CPM and a QE.
> diff -- a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
> --- a/Documentation/admin-guide/devices.txt
> +++ b/Documentation/admin-guide/devices.txt
> @@ -2691,7 +2691,7 @@
> 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
> 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
> ...
> - 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
> + 49 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 3
> 50 = /dev/ttyIOC0 Altix serial card
> ...
> 81 = /dev/ttyIOC31 Altix serial card
Hi Christophe,
On 7/31/23 22:21, Christophe Leroy wrote:
>
>
> Le 24/07/2023 à 08:33, Randy Dunlap a écrit :
>> Reconcile devices.txt with serial/ucc_uart.c regarding device number
>> assignments. ucc_uart.c supports 4 ports and uses minor devnums
>> 46-49, so update devices.txt with that info.
>> Then update ucc_uart.c's reference to the location of the devices.txt
>> list in the kernel source tree.
>
> Devices ttyCPM* belong to cpm_uart driver. As explained in the comment
> you have modified in UCC uart driver, UCC uart borrows those devices and
> shall not be considered as the reference. But the lines you modify in
> device.txt doesn't mention QE UCC, it mentions CPM SCC and CPM SMC.
>
> CPM uart driver supports up to 6 ports (4 SCC and 2 SMC).
>
Thank you for replying.
Does this mean that the patch should be reverted?
> On one of my boards which has a powerpc mpc866 CPU, I have:
>
> [ 2.393872] ff000a80.serial: ttyCPM0 at MMIO 0xfff00a80 (irq = 19,
> base_baud = 8250000) is a CPM UART
> [ 2.411899] ff000a90.serial: ttyCPM1 at MMIO 0xfff00a90 (irq = 20,
> base_baud = 8250000) is a CPM UART
> [ 2.430352] ff000a00.serial: ttyCPM2 at MMIO 0xfff00a00 (irq = 30,
> base_baud = 8250000) is a CPM UART
> [ 2.448944] ff000a20.serial: ttyCPM3 at MMIO 0xfff00a20 (irq = 29,
> base_baud = 8250000) is a CPM UART
> [ 2.467435] ff000a40.serial: ttyCPM4 at MMIO 0xfff00a40 (irq = 28,
> base_baud = 8250000) is a CPM UART
> [ 2.485924] ff000a60.serial: ttyCPM5 at MMIO 0xfff00a60 (irq = 27,
> base_baud = 8250000) is a CPM UART
>
> # ll /dev/ttyCPM*
> crw------- 1 root root 204, 46 Jan 1 01:01 /dev/ttyCPM0
> crw------- 1 root root 204, 47 Jan 1 01:00 /dev/ttyCPM1
> crw------- 1 root root 204, 48 Jan 1 01:00 /dev/ttyCPM2
> crw------- 1 root root 204, 49 Jan 1 01:00 /dev/ttyCPM3
> crw------- 1 root root 204, 50 Jan 1 01:00 /dev/ttyCPM4
> crw------- 1 root root 204, 51 Jan 1 01:00 /dev/ttyCPM5
I don't see minors 50-51 allocated in devices.txt for use by this device/driver.
Am I overlooking that allocation somewhere?
Thanks for your help.
>
> # cat /proc/tty/drivers
> /dev/tty /dev/tty 5 0 system:/dev/tty
> /dev/console /dev/console 5 1 system:console
> /dev/ptmx /dev/ptmx 5 2 system
> ttyCPM /dev/ttyCPM 204 46-51 serial
> pty_slave /dev/pts 136 0-1048575 pty:slave
> pty_master /dev/ptm 128 0-1048575 pty:master
> pty_slave /dev/ttyp 3 0-4 pty:slave
> pty_master /dev/pty 2 0-4 pty:master
>
> Christophe
>
>
>>
>> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
>> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>> Signed-off-by: Randy Dunlap <[email protected]>
>> Cc: Timur Tabi <[email protected]>
>> Cc: Kumar Gala <[email protected]>
>> Cc: [email protected]
>> Cc: Greg Kroah-Hartman <[email protected]>
>> Cc: Jiri Slaby <[email protected]>
>> Cc: [email protected]
>> Cc: Jonathan Corbet <[email protected]>
>> Cc: [email protected]
>> ---
>> Documentation/admin-guide/devices.txt | 2 +-
>> drivers/tty/serial/ucc_uart.c | 2 +-
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff -- a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
>> --- a/drivers/tty/serial/ucc_uart.c
>> +++ b/drivers/tty/serial/ucc_uart.c
>> @@ -59,7 +59,7 @@ static int firmware_loaded;
>> /* #define LOOPBACK */
>>
>> /* The major and minor device numbers are defined in
>> - * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
>> + * Documentation/admin-guide/devices.txt. For the QE
>> * UART, we have major number 204 and minor numbers 46 - 49, which are the
>> * same as for the CPM2. This decision was made because no Freescale part
>> * has both a CPM and a QE.
>> diff -- a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
>> --- a/Documentation/admin-guide/devices.txt
>> +++ b/Documentation/admin-guide/devices.txt
>> @@ -2691,7 +2691,7 @@
>> 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
>> 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
>> ...
>> - 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
>> + 49 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 3
>> 50 = /dev/ttyIOC0 Altix serial card
>> ...
>> 81 = /dev/ttyIOC31 Altix serial card
--
~Randy
Le 01/08/2023 à 07:30, Randy Dunlap a écrit :
> Hi Christophe,
>
> On 7/31/23 22:21, Christophe Leroy wrote:
>>
>>
>> Le 24/07/2023 à 08:33, Randy Dunlap a écrit :
>>> Reconcile devices.txt with serial/ucc_uart.c regarding device number
>>> assignments. ucc_uart.c supports 4 ports and uses minor devnums
>>> 46-49, so update devices.txt with that info.
>>> Then update ucc_uart.c's reference to the location of the devices.txt
>>> list in the kernel source tree.
>>
>> Devices ttyCPM* belong to cpm_uart driver. As explained in the comment
>> you have modified in UCC uart driver, UCC uart borrows those devices and
>> shall not be considered as the reference. But the lines you modify in
>> device.txt doesn't mention QE UCC, it mentions CPM SCC and CPM SMC.
>>
>> CPM uart driver supports up to 6 ports (4 SCC and 2 SMC).
>>
>
> Thank you for replying.
>
> Does this mean that the patch should be reverted?
Not sure it should be reverted, the best would be to fix it up because
anyway what we had was wrong.
See below.
>
>> On one of my boards which has a powerpc mpc866 CPU, I have:
>>
>> [ 2.393872] ff000a80.serial: ttyCPM0 at MMIO 0xfff00a80 (irq = 19,
>> base_baud = 8250000) is a CPM UART
>> [ 2.411899] ff000a90.serial: ttyCPM1 at MMIO 0xfff00a90 (irq = 20,
>> base_baud = 8250000) is a CPM UART
>> [ 2.430352] ff000a00.serial: ttyCPM2 at MMIO 0xfff00a00 (irq = 30,
>> base_baud = 8250000) is a CPM UART
>> [ 2.448944] ff000a20.serial: ttyCPM3 at MMIO 0xfff00a20 (irq = 29,
>> base_baud = 8250000) is a CPM UART
>> [ 2.467435] ff000a40.serial: ttyCPM4 at MMIO 0xfff00a40 (irq = 28,
>> base_baud = 8250000) is a CPM UART
>> [ 2.485924] ff000a60.serial: ttyCPM5 at MMIO 0xfff00a60 (irq = 27,
>> base_baud = 8250000) is a CPM UART
>>
>> # ll /dev/ttyCPM*
>> crw------- 1 root root 204, 46 Jan 1 01:01 /dev/ttyCPM0
>> crw------- 1 root root 204, 47 Jan 1 01:00 /dev/ttyCPM1
>> crw------- 1 root root 204, 48 Jan 1 01:00 /dev/ttyCPM2
>> crw------- 1 root root 204, 49 Jan 1 01:00 /dev/ttyCPM3
>> crw------- 1 root root 204, 50 Jan 1 01:00 /dev/ttyCPM4
>> crw------- 1 root root 204, 51 Jan 1 01:00 /dev/ttyCPM5
>
> I don't see minors 50-51 allocated in devices.txt for use by this device/driver.
> Am I overlooking that allocation somewhere?
I looked into history.
ttyCPM do not appear in devices.txt in v2.6.9.
It was introduced in v2.6.10 as :
46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
...
49 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
Then in v2.6.11 we find:
46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
...
47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
50 = /dev/ttyIOC40 Altix serial card
...
81 = /dev/ttyIOC431 Altix serial card
So it looks like from the begining the intention was to have 6 ports
(from 0 to 5) and it should have been up to 51. For some reason it was
messed up.
If you look into v2.6.10 drivers/serial/cpm_uart/cpm_uart.h you see
there are 6 ports. Even in v2.6.9 that driver exists and has 6 ports.
Anyway, the ttyIOC* were removed by commit a017ef17cfd8 ("tty/serial:
remove the ioc4_serial driver"), so it should be no problem to fix
devices.txt and set ttyCPM from 46 to 51.
Christophe
>
> Thanks for your help.
>
>>
>> # cat /proc/tty/drivers
>> /dev/tty /dev/tty 5 0 system:/dev/tty
>> /dev/console /dev/console 5 1 system:console
>> /dev/ptmx /dev/ptmx 5 2 system
>> ttyCPM /dev/ttyCPM 204 46-51 serial
>> pty_slave /dev/pts 136 0-1048575 pty:slave
>> pty_master /dev/ptm 128 0-1048575 pty:master
>> pty_slave /dev/ttyp 3 0-4 pty:slave
>> pty_master /dev/pty 2 0-4 pty:master
>>
>> Christophe
>>
>>
>>>
>>> Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
>>> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>>> Signed-off-by: Randy Dunlap <[email protected]>
>>> Cc: Timur Tabi <[email protected]>
>>> Cc: Kumar Gala <[email protected]>
>>> Cc: [email protected]
>>> Cc: Greg Kroah-Hartman <[email protected]>
>>> Cc: Jiri Slaby <[email protected]>
>>> Cc: [email protected]
>>> Cc: Jonathan Corbet <[email protected]>
>>> Cc: [email protected]
>>> ---
>>> Documentation/admin-guide/devices.txt | 2 +-
>>> drivers/tty/serial/ucc_uart.c | 2 +-
>>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff -- a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
>>> --- a/drivers/tty/serial/ucc_uart.c
>>> +++ b/drivers/tty/serial/ucc_uart.c
>>> @@ -59,7 +59,7 @@ static int firmware_loaded;
>>> /* #define LOOPBACK */
>>>
>>> /* The major and minor device numbers are defined in
>>> - * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
>>> + * Documentation/admin-guide/devices.txt. For the QE
>>> * UART, we have major number 204 and minor numbers 46 - 49, which are the
>>> * same as for the CPM2. This decision was made because no Freescale part
>>> * has both a CPM and a QE.
>>> diff -- a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
>>> --- a/Documentation/admin-guide/devices.txt
>>> +++ b/Documentation/admin-guide/devices.txt
>>> @@ -2691,7 +2691,7 @@
>>> 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
>>> 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
>>> ...
>>> - 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
>>> + 49 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 3
>>> 50 = /dev/ttyIOC0 Altix serial card
>>> ...
>>> 81 = /dev/ttyIOC31 Altix serial card
>