This is the start of the stable review cycle for the 5.13.12 release.
There are 151 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 18 Aug 2021 12:54:12 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.12-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.13.12-rc1
Kuan-Ying Lee <[email protected]>
kasan, slub: reset tag when printing address
Jeff Layton <[email protected]>
ceph: take snap_empty_lock atomically with snaprealm refcount change
Jeff Layton <[email protected]>
ceph: clean up locking annotation for ceph_get_snap_realm and __lookup_snap_realm
Jeff Layton <[email protected]>
ceph: add some lockdep assertions around snaprealm handling
Sean Christopherson <[email protected]>
KVM: x86/mmu: Protect marking SPs unsync when using TDP MMU with spinlock
Sean Christopherson <[email protected]>
KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs
Sean Christopherson <[email protected]>
KVM: nVMX: Use vmx_need_pf_intercept() when deciding if L0 wants a #PF
Sean Christopherson <[email protected]>
KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulation
Zhen Lei <[email protected]>
locking/rtmutex: Use the correct rtmutex debugging config option
Ard Biesheuvel <[email protected]>
efi/libstub: arm64: Double check image alignment at entry
Christophe Leroy <[email protected]>
powerpc/32: Fix critical and debug interrupts on BOOKE
Cédric Le Goater <[email protected]>
powerpc/xive: Do not skip CPU-less nodes when creating the IPIs
Christophe Leroy <[email protected]>
powerpc/smp: Fix OOPS in topology_init()
Christophe Leroy <[email protected]>
powerpc/32s: Fix napping restore in data storage interrupt (DSI)
Laurent Dufour <[email protected]>
powerpc/pseries: Fix update of LPAR security flavor after LPM
Christophe Leroy <[email protected]>
powerpc/interrupt: Do not call single_step_exception() from other exceptions
Thomas Gleixner <[email protected]>
PCI/MSI: Protect msi_desc::masked for multi-MSI
Thomas Gleixner <[email protected]>
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
Thomas Gleixner <[email protected]>
PCI/MSI: Correct misleading comments
Thomas Gleixner <[email protected]>
PCI/MSI: Do not set invalid bits in MSI mask
Thomas Gleixner <[email protected]>
PCI/MSI: Enforce MSI[X] entry updates to be visible
Thomas Gleixner <[email protected]>
PCI/MSI: Enforce that MSI-X table entry is masked for update
Thomas Gleixner <[email protected]>
PCI/MSI: Mask all unused MSI-X entries
Thomas Gleixner <[email protected]>
PCI/MSI: Enable and mask MSI-X early
Christophe Leroy <[email protected]>
powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()
Ben Dai <[email protected]>
genirq/timings: Prevent potential array overflow in __irq_timings_store()
Bixuan Cui <[email protected]>
genirq/msi: Ensure deactivation on teardown
Babu Moger <[email protected]>
x86/resctrl: Fix default monitoring groups reporting
Thomas Gleixner <[email protected]>
x86/ioapic: Force affinity setup before startup
Thomas Gleixner <[email protected]>
x86/msi: Force affinity setup before startup
Thomas Gleixner <[email protected]>
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
Randy Dunlap <[email protected]>
x86/tools: Fix objdump version check again
Dhananjay Phadke <[email protected]>
i2c: iproc: fix race between client unreg and tasklet
Pu Lehui <[email protected]>
powerpc/kprobes: Fix kprobe Oops happens in booke
Ard Biesheuvel <[email protected]>
efi/libstub: arm64: Relax 2M alignment again for relocatable kernels
Ard Biesheuvel <[email protected]>
efi/libstub: arm64: Force Image reallocation if BSS was not reserved
David Brazdil <[email protected]>
KVM: arm64: Fix off-by-one in range_is_memory
Benjamin Herrenschmidt <[email protected]>
arm64: efi: kaslr: Fix occasional random alloc (and boot) failure
Xie Yongji <[email protected]>
nbd: Aovid double completion of a request
Longpeng(Mike) <[email protected]>
vsock/virtio: avoid potential deadlock when vsock device remove
Maximilian Heyne <[email protected]>
xen/events: Fix race in set_evtchn_to_irq
Matt Roper <[email protected]>
drm/i915: Only access SFC_DONE when media domain is not fused off
Eric Dumazet <[email protected]>
net: igmp: increase size of mr_ifc_count
Neal Cardwell <[email protected]>
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
Willy Tarreau <[email protected]>
net: linkwatch: fix failure to restore device state across suspend/resume
Yang Yingliang <[email protected]>
net: bridge: fix memleak in br_add_if()
Nikolay Aleksandrov <[email protected]>
net: bridge: fix flags interpretation for extern learn fdb entries
Andre Przywara <[email protected]>
pinctrl: sunxi: Don't underestimate number of functions
Vladimir Oltean <[email protected]>
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
Vladimir Oltean <[email protected]>
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
Vladimir Oltean <[email protected]>
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
Vladimir Oltean <[email protected]>
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
Eric Dumazet <[email protected]>
net: igmp: fix data-race in igmp_ifc_timer_expire()
Takeshi Misawa <[email protected]>
net: Fix memory leak in ieee802154_raw_deliver
Ben Hutchings <[email protected]>
net: dsa: microchip: ksz8795: Don't use phy_port_cnt in VLAN table lookup
Ben Hutchings <[email protected]>
net: dsa: microchip: ksz8795: Fix VLAN filtering
Ben Hutchings <[email protected]>
net: dsa: microchip: ksz8795: Use software untagging on CPU port
Ben Hutchings <[email protected]>
net: dsa: microchip: ksz8795: Fix VLAN untagged flag change on deletion
Ben Hutchings <[email protected]>
net: dsa: microchip: ksz8795: Reject unsupported VLAN configuration
Ben Hutchings <[email protected]>
net: dsa: microchip: ksz8795: Fix PVID tag insertion
Ben Hutchings <[email protected]>
net: dsa: microchip: Fix ksz_read64()
Yonghong Song <[email protected]>
bpf: Fix potentially incorrect results with bpf_get_local_storage()
Miklos Szeredi <[email protected]>
ovl: fix deadlock in splice write
Christian Hewitt <[email protected]>
drm/meson: fix colour distortion from HDR set during vendor u-boot
Aya Levin <[email protected]>
net/mlx5: Fix return value from tracer initialization
Shay Drory <[email protected]>
net/mlx5: Synchronize correct IRQ when destroying CQ
Chris Mi <[email protected]>
net/mlx5e: TC, Fix error handling memory leak
Aya Levin <[email protected]>
net/mlx5: Block switchdev mode while devlink traps are active
Maxim Mikityanskiy <[email protected]>
net/mlx5e: Destroy page pool after XDP SQ to fix use-after-free
Roi Dayan <[email protected]>
net/mlx5e: Avoid creating tunnel headers for local route
Alex Vesker <[email protected]>
net/mlx5: DR, Add fail on error check on decap
Leon Romanovsky <[email protected]>
net/mlx5: Don't skip subfunction cleanup in case of error in module init
Hao Xu <[email protected]>
io-wq: fix IO_WORKER_F_FIXED issue in create_io_worker()
Hao Xu <[email protected]>
io-wq: fix bug of creating io-wokers unconditionally
Guillaume Nault <[email protected]>
bareudp: Fix invalid read beyond skb's linear data
Roi Dayan <[email protected]>
psample: Add a fwd declaration for skbuff
Md Fahad Iqbal Polash <[email protected]>
iavf: Set RSS LUT and key in reset handle path
Brett Creeley <[email protected]>
ice: don't remove netdev->dev_addr from uc sync list
Anirudh Venkataramanan <[email protected]>
ice: Stop processing VF messages during teardown
Anirudh Venkataramanan <[email protected]>
ice: Prevent probing virtual functions
Hangbin Liu <[email protected]>
net: sched: act_mirred: Reset ct info when mirror/redirect skb
Guvenc Gulce <[email protected]>
net/smc: Correct smc link connection counter in case of smc client
Karsten Graul <[email protected]>
net/smc: fix wait on already cleared link
Nadav Amit <[email protected]>
io_uring: clear TIF_NOTIFY_SIGNAL when running task work
Pali Rohár <[email protected]>
ppp: Fix generating ifname when empty IFLA_IFNAME is specified
Ben Hutchings <[email protected]>
net: phy: micrel: Fix link detection on ksz87xx switch"
Oleksij Rempel <[email protected]>
net: dsa: qca: ar9331: make proper initial port defaults
Tatsuhiko Yasumatsu <[email protected]>
bpf: Fix integer overflow involving bucket_size
Daniel Xu <[email protected]>
libbpf: Do not close un-owned FD 0 on errors
Robin Gögge <[email protected]>
libbpf: Fix probe for BPF_PROG_TYPE_CGROUP_SOCKOPT
Christophe JAILLET <[email protected]>
drm/amd/pm: Fix a memory leak in an error handling path in 'vangogh_tables_init()'
Kan Liang <[email protected]>
perf/x86/intel: Apply mid ACK for small core
Hans de Goede <[email protected]>
platform/x86: pcengines-apuv2: Add missing terminating entries to gpio-lookup tables
John Hubbard <[email protected]>
net: mvvp2: fix short frame size on s390
DENG Qingfang <[email protected]>
net: dsa: mt7530: add the missing RxUnicast MIB counter
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Fix mono playback
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Fix LRCLK frame start edge
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: PLL must be running when changing MCLK_SRC_SEL
Andy Shevchenko <[email protected]>
pinctrl: tigerlake: Fix GPIO mapping for newer version of software
Yajun Deng <[email protected]>
netfilter: nf_conntrack_bridge: Fix memory leak when error
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Remove duplicate control for WNF filter frequency
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Fix inversion of ADC Notch Switch control
Guennadi Liakhovetski <[email protected]>
ASoC: SOF: Intel: hda-ipc: fix reply size checking
Pierre-Louis Bossart <[email protected]>
ASoC: SOF: Intel: Kconfig: fix SoundWire dependencies
Tianjia Zhang <[email protected]>
selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
Mike Tipton <[email protected]>
interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Fix bclk calculation for mono
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_J
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Correct definition of ADC Volume control
Hsin-Yi Wang <[email protected]>
pinctrl: mediatek: Fix fallback behavior for bias_set_combo
jason-jh.lin <[email protected]>
drm/mediatek: Fix cursor plane no update
Dongliang Mu <[email protected]>
ieee802154: hwsim: fix GPF in hwsim_new_edge_nl
Dongliang Mu <[email protected]>
ieee802154: hwsim: fix GPF in hwsim_set_edge_lqi
Alex Deucher <[email protected]>
drm/amdgpu: handle VCN instances when harvesting (v2)
Alex Deucher <[email protected]>
drm/amdgpu: don't enable baco on boco platforms in runpm
Solomon Chiu <[email protected]>
drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.
Anson Jacob <[email protected]>
drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_work
Eric Bernstein <[email protected]>
drm/amd/display: Remove invalid assert for ODM + MPC case
Ankit Nautiyal <[email protected]>
drm/i915/display: Fix the 12 BPC bits for PIPE_MISC reg
Zhenyu Wang <[email protected]>
drm/i915/gvt: Fix cached atomics setting for Windows VM
Nathan Chancellor <[email protected]>
vmlinux.lds.h: Handle clang's module.{c,d}tor sections
Changbin Du <[email protected]>
riscv: kexec: do not add '-mno-relax' flag if compiler doesn't support it
Dan Williams <[email protected]>
libnvdimm/region: Fix label activation vs errors
Dan Williams <[email protected]>
ACPI: NFIT: Fix support for virtual SPA ranges
Damien Le Moal <[email protected]>
pinctrl: k210: Fix k210_fpioa_probe()
Luis Henriques <[email protected]>
ceph: reduce contention in ceph_check_delayed_caps()
Vineet Gupta <[email protected]>
ARC: fp: set FPU_STATUS.FWE to enable FPU_STATUS update on context switch
Grygorii Strashko <[email protected]>
net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
Loic Poulain <[email protected]>
net: wwan: mhi_wwan_ctrl: Fix possible deadlock
Hsuan-Chi Kuo <[email protected]>
seccomp: Fix setting loaded filter count during TSYNC
Tejun Heo <[email protected]>
cgroup: rstat: fix A-A deadlock on 32bit around u64_stats_sync
Ewan D. Milne <[email protected]>
scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crash
Pavel Begunkov <[email protected]>
io_uring: fix ctx-exit io_rsrc_put_work() deadlock
Jens Axboe <[email protected]>
io_uring: drop ctx->uring_lock before flushing work item
Ronnie Sahlberg <[email protected]>
cifs: use the correct max-length for dentry_path_raw()
Rohith Surabattula <[email protected]>
cifs: Call close synchronously during unlink/rename/lease break.
Shyam Prasad N <[email protected]>
cifs: create sd context must be a multiple of 8
Rohith Surabattula <[email protected]>
cifs: Handle race conditions during rename
Greg Kroah-Hartman <[email protected]>
i2c: dev: zero out array used for i2c reads from userspace
Takashi Iwai <[email protected]>
ASoC: intel: atom: Fix reference to PCM buffer address
Takashi Iwai <[email protected]>
ASoC: kirkwood: Fix reference to PCM buffer address
Mark Brown <[email protected]>
ASoC: tlv320aic31xx: Fix jack detection after suspend
Takashi Iwai <[email protected]>
ASoC: uniphier: Fix reference to PCM buffer address
Takashi Iwai <[email protected]>
ASoC: xilinx: Fix reference to PCM buffer address
Takashi Iwai <[email protected]>
ASoC: amd: Fix reference to PCM buffer address
Colin Ian King <[email protected]>
iio: adc: Fix incorrect exit of for-loop
Chris Lesiak <[email protected]>
iio: humidity: hdc100x: Add margin to the conversion time
Antti Keränen <[email protected]>
iio: adis: set GPIO reset pin direction
Uwe Kleine-König <[email protected]>
iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels
Greg Kroah-Hartman <[email protected]>
Revert "usb: dwc3: gadget: Use list_replace_init() before traversing lists"
Liang Wang <[email protected]>
lib: use PFN_PHYS() in devmem_is_allowed()
-------------
Diffstat:
Documentation/virt/kvm/locking.rst | 8 +-
Makefile | 4 +-
arch/arc/kernel/fpu.c | 9 +-
arch/arm64/kvm/hyp/nvhe/mem_protect.c | 2 +-
arch/powerpc/include/asm/interrupt.h | 3 +
arch/powerpc/include/asm/irq.h | 2 +-
arch/powerpc/include/asm/ptrace.h | 16 +++
arch/powerpc/kernel/asm-offsets.c | 31 +++--
arch/powerpc/kernel/head_book3s_32.S | 2 +-
arch/powerpc/kernel/head_booke.h | 27 +----
arch/powerpc/kernel/irq.c | 7 +-
arch/powerpc/kernel/kprobes.c | 3 +-
arch/powerpc/kernel/sysfs.c | 2 +-
arch/powerpc/kernel/time.c | 2 +-
arch/powerpc/kernel/traps.c | 9 +-
arch/powerpc/platforms/pseries/setup.c | 5 +-
arch/powerpc/sysdev/xive/common.c | 35 ++++--
arch/riscv/kernel/Makefile | 2 +-
arch/x86/events/intel/core.c | 23 ++--
arch/x86/events/perf_event.h | 15 +++
arch/x86/include/asm/kvm_host.h | 7 ++
arch/x86/kernel/apic/io_apic.c | 6 +-
arch/x86/kernel/apic/msi.c | 11 +-
arch/x86/kernel/cpu/resctrl/monitor.c | 27 +++--
arch/x86/kernel/hpet.c | 2 +-
arch/x86/kvm/mmu/mmu.c | 28 +++++
arch/x86/kvm/mmu/tdp_mmu.c | 26 +++--
arch/x86/kvm/vmx/nested.c | 3 +-
arch/x86/kvm/vmx/vmx.h | 2 +-
arch/x86/tools/chkobjdump.awk | 1 +
block/blk-cgroup.c | 14 ++-
drivers/acpi/nfit/core.c | 3 +
drivers/base/core.c | 1 +
drivers/block/nbd.c | 14 ++-
drivers/firmware/efi/libstub/arm64-stub.c | 69 ++++++++++--
drivers/firmware/efi/libstub/randomalloc.c | 2 +
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 12 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 +
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +-
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 2 +-
.../gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 1 -
drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 2 +-
drivers/gpu/drm/i915/display/intel_display.c | 34 ++++--
drivers/gpu/drm/i915/gvt/handlers.c | 1 +
drivers/gpu/drm/i915/gvt/mmio_context.c | 2 +
drivers/gpu/drm/i915/i915_gpu_error.c | 19 +++-
drivers/gpu/drm/i915/i915_reg.h | 16 ++-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 3 -
drivers/gpu/drm/mediatek/mtk_drm_plane.c | 60 +++++-----
drivers/gpu/drm/meson/meson_registers.h | 5 +
drivers/gpu/drm/meson/meson_viu.c | 7 +-
drivers/i2c/busses/i2c-bcm-iproc.c | 4 +-
drivers/i2c/i2c-dev.c | 5 +-
drivers/iio/adc/palmas_gpadc.c | 4 +-
drivers/iio/adc/ti-ads7950.c | 1 -
drivers/iio/humidity/hdc100x.c | 6 +-
drivers/iio/imu/adis.c | 3 +-
drivers/infiniband/hw/mlx5/cq.c | 4 +-
drivers/infiniband/hw/mlx5/devx.c | 3 +-
drivers/interconnect/qcom/icc-rpmh.c | 10 +-
drivers/net/bareudp.c | 16 ++-
drivers/net/dsa/hirschmann/hellcreek.c | 7 +-
drivers/net/dsa/lan9303-core.c | 34 +++---
drivers/net/dsa/lantiq_gswip.c | 14 ++-
drivers/net/dsa/microchip/ksz8795.c | 82 +++++++++++---
drivers/net/dsa/microchip/ksz8795_reg.h | 4 +
drivers/net/dsa/microchip/ksz_common.h | 9 +-
drivers/net/dsa/mt7530.c | 1 +
drivers/net/dsa/qca/ar9331.c | 73 +++++++++++-
drivers/net/dsa/sja1105/sja1105_main.c | 4 +-
drivers/net/ethernet/intel/iavf/iavf_main.c | 13 ++-
drivers/net/ethernet/intel/ice/ice.h | 1 +
drivers/net/ethernet/intel/ice/ice_main.c | 28 +++--
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 7 ++
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/cq.c | 1 +
.../ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 11 +-
.../net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 5 +
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 33 ++----
drivers/net/ethernet/mellanox/mlx5/core/eq.c | 20 +++-
.../net/ethernet/mellanox/mlx5/core/esw/sample.c | 1 +
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 14 ++-
.../net/ethernet/mellanox/mlx5/core/fpga/conn.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h | 2 +
drivers/net/ethernet/mellanox/mlx5/core/main.c | 12 +-
.../net/ethernet/mellanox/mlx5/core/mlx5_core.h | 5 +
.../ethernet/mellanox/mlx5/core/steering/dr_send.c | 4 +-
.../mellanox/mlx5/core/steering/dr_ste_v0.c | 2 +
drivers/net/ethernet/ti/cpsw_new.c | 7 +-
drivers/net/ethernet/ti/cpsw_priv.h | 4 +-
drivers/net/ieee802154/mac802154_hwsim.c | 6 +-
drivers/net/phy/micrel.c | 2 -
drivers/net/ppp/ppp_generic.c | 2 +-
drivers/net/wwan/mhi_wwan_ctrl.c | 12 +-
drivers/nvdimm/namespace_devs.c | 17 ++-
drivers/pci/msi.c | 125 +++++++++++++--------
drivers/pinctrl/intel/pinctrl-tigerlake.c | 26 ++---
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 8 +-
drivers/pinctrl/pinctrl-k210.c | 26 ++++-
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 8 +-
drivers/platform/x86/pcengines-apuv2.c | 2 +
drivers/scsi/lpfc/lpfc_init.c | 3 +-
drivers/usb/dwc3/gadget.c | 18 +--
drivers/vdpa/mlx5/net/mlx5_vnet.c | 3 +-
drivers/xen/events/events_base.c | 20 +++-
fs/ceph/caps.c | 17 ++-
fs/ceph/mds_client.c | 25 +++--
fs/ceph/snap.c | 54 +++++----
fs/ceph/super.h | 2 +-
fs/cifs/cifsglob.h | 5 +
fs/cifs/dir.c | 2 +-
fs/cifs/file.c | 35 +++---
fs/cifs/inode.c | 19 +++-
fs/cifs/misc.c | 50 +++++++--
fs/cifs/smb2pdu.c | 2 +-
fs/io-wq.c | 26 +++--
fs/io_uring.c | 26 +++--
fs/overlayfs/file.c | 47 +++++++-
include/asm-generic/vmlinux.lds.h | 1 +
include/linux/bpf-cgroup.h | 4 +-
include/linux/device.h | 1 +
include/linux/inetdevice.h | 2 +-
include/linux/irq.h | 2 +
include/linux/mlx5/driver.h | 3 +-
include/linux/msi.h | 2 +-
include/net/psample.h | 2 +
include/uapi/linux/neighbour.h | 7 +-
kernel/bpf/hashtab.c | 4 +-
kernel/bpf/helpers.c | 4 +-
kernel/cgroup/rstat.c | 19 ++--
kernel/irq/chip.c | 5 +-
kernel/irq/msi.c | 13 ++-
kernel/irq/timings.c | 5 +
kernel/locking/rtmutex.c | 2 +-
kernel/seccomp.c | 2 +-
lib/devmem_is_allowed.c | 2 +-
mm/slub.c | 4 +-
net/bridge/br.c | 3 +-
net/bridge/br_fdb.c | 11 +-
net/bridge/br_if.c | 2 +
net/bridge/br_private.h | 2 +-
net/bridge/netfilter/nf_conntrack_bridge.c | 6 +
net/core/link_watch.c | 5 +-
net/ieee802154/socket.c | 7 +-
net/ipv4/igmp.c | 21 ++--
net/ipv4/tcp_bbr.c | 2 +-
net/sched/act_mirred.c | 3 +
net/smc/af_smc.c | 2 +-
net/smc/smc_core.c | 4 +-
net/smc/smc_core.h | 4 +
net/smc/smc_llc.c | 10 +-
net/smc/smc_tx.c | 18 ++-
net/smc/smc_wr.c | 10 ++
net/vmw_vsock/virtio_transport.c | 7 +-
sound/soc/amd/acp-pcm-dma.c | 2 +-
sound/soc/amd/raven/acp3x-pcm-dma.c | 2 +-
sound/soc/amd/renoir/acp3x-pdm-dma.c | 2 +-
sound/soc/codecs/cs42l42.c | 83 ++++++++------
sound/soc/codecs/cs42l42.h | 3 +
sound/soc/codecs/tlv320aic31xx.c | 10 ++
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 3 +-
sound/soc/kirkwood/kirkwood-dma.c | 26 +++--
sound/soc/sof/intel/Kconfig | 4 +-
sound/soc/sof/intel/hda-ipc.c | 4 +-
sound/soc/uniphier/aio-dma.c | 2 +-
sound/soc/xilinx/xlnx_formatter_pcm.c | 4 +-
tools/lib/bpf/btf.c | 3 +-
tools/lib/bpf/libbpf_probes.c | 4 +-
tools/testing/selftests/sgx/sigstruct.c | 41 +++----
169 files changed, 1382 insertions(+), 656 deletions(-)
From: Ewan D. Milne <[email protected]>
commit 9977d880f7a3c233db9165a75a3a14defc2a4aee upstream.
The phba->poll_list is traversed in case of an error in
lpfc_sli4_hba_setup(), so it must be initialized earlier in case the error
path is taken.
[ 490.030738] lpfc 0000:65:00.0: 0:1413 Failed to init iocb list.
[ 490.036661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 490.044485] PGD 0 P4D 0
[ 490.047027] Oops: 0000 [#1] SMP PTI
[ 490.050518] CPU: 0 PID: 7 Comm: kworker/0:1 Kdump: loaded Tainted: G I --------- - - 4.18.
[ 490.060511] Hardware name: Dell Inc. PowerEdge R440/0WKGTH, BIOS 1.4.8 05/22/2018
[ 490.067994] Workqueue: events work_for_cpu_fn
[ 490.072371] RIP: 0010:lpfc_sli4_cleanup_poll_list+0x20/0xb0 [lpfc]
[ 490.078546] Code: cf e9 04 f7 fe ff 0f 1f 40 00 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 4d 8d a79
[ 490.097291] RSP: 0018:ffffbd1a463dbcc8 EFLAGS: 00010246
[ 490.102518] RAX: 0000000000008200 RBX: ffff945cdb8c0000 RCX: 0000000000000000
[ 490.109649] RDX: 0000000000018200 RSI: ffff9468d0e16818 RDI: 0000000000000000
[ 490.116783] RBP: ffff945cdb8c1740 R08: 00000000000015c5 R09: 0000000000000042
[ 490.123915] R10: 0000000000000000 R11: ffffbd1a463dbab0 R12: ffff945cdb8c25c0
[ 490.131049] R13: 00000000fffffff4 R14: 0000000000001800 R15: ffff945cdb8c0000
[ 490.138182] FS: 0000000000000000(0000) GS:ffff9468d0e00000(0000) knlGS:0000000000000000
[ 490.146267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 490.152013] CR2: 0000000000000000 CR3: 000000042ca10002 CR4: 00000000007706f0
[ 490.159146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 490.166277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 490.173409] PKRU: 55555554
[ 490.176123] Call Trace:
[ 490.178598] lpfc_sli4_queue_destroy+0x7f/0x3c0 [lpfc]
[ 490.183745] lpfc_sli4_hba_setup+0x1bc7/0x23e0 [lpfc]
[ 490.188797] ? kernfs_activate+0x63/0x80
[ 490.192721] ? kernfs_add_one+0xe7/0x130
[ 490.196647] ? __kernfs_create_file+0x80/0xb0
[ 490.201020] ? lpfc_pci_probe_one_s4.isra.48+0x46f/0x9e0 [lpfc]
[ 490.206944] lpfc_pci_probe_one_s4.isra.48+0x46f/0x9e0 [lpfc]
[ 490.212697] lpfc_pci_probe_one+0x179/0xb70 [lpfc]
[ 490.217492] local_pci_probe+0x41/0x90
[ 490.221246] work_for_cpu_fn+0x16/0x20
[ 490.224994] process_one_work+0x1a7/0x360
[ 490.229009] ? create_worker+0x1a0/0x1a0
[ 490.232933] worker_thread+0x1cf/0x390
[ 490.236687] ? create_worker+0x1a0/0x1a0
[ 490.240612] kthread+0x116/0x130
[ 490.243846] ? kthread_flush_work_fn+0x10/0x10
[ 490.248293] ret_from_fork+0x35/0x40
[ 490.251869] Modules linked in: lpfc(+) xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4i
[ 490.332609] CR2: 0000000000000000
Link: https://lore.kernel.org/r/[email protected]
Fixes: 93a4d6f40198 ("scsi: lpfc: Add registration for CPU Offline/Online events")
Cc: [email protected]
Reviewed-by: James Smart <[email protected]>
Signed-off-by: Ewan D. Milne <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/lpfc/lpfc_init.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -13091,6 +13091,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pd
if (!phba)
return -ENOMEM;
+ INIT_LIST_HEAD(&phba->poll_list);
+
/* Perform generic PCI device enabling operation */
error = lpfc_enable_pci_dev(phba);
if (error)
@@ -13225,7 +13227,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pd
/* Enable RAS FW log support */
lpfc_sli4_ras_setup(phba);
- INIT_LIST_HEAD(&phba->poll_list);
timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp);
From: Greg Kroah-Hartman <[email protected]>
commit 664cc971fb259007e49cc8a3ac43b0787d89443f upstream.
This reverts commit d25d85061bd856d6be221626605319154f9b5043 as it is
reported to cause problems on many different types of boards.
Reported-by: Thinh Nguyen <[email protected]>
Reported-by: John Stultz <[email protected]>
Cc: Ray Chi <[email protected]>
Link: https://lore.kernel.org/r/CANcMJZCEVxVLyFgLwK98hqBEdc0_n4P0x_K6Gih8zNH3ouzbJQ@mail.gmail.com
Fixes: d25d85061bd8 ("usb: dwc3: gadget: Use list_replace_init() before traversing lists")
Cc: stable <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Wesley Cheng <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 18 ++----------------
1 file changed, 2 insertions(+), 16 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1741,13 +1741,9 @@ static void dwc3_gadget_ep_cleanup_cance
{
struct dwc3_request *req;
struct dwc3_request *tmp;
- struct list_head local;
struct dwc3 *dwc = dep->dwc;
-restart:
- list_replace_init(&dep->cancelled_list, &local);
-
- list_for_each_entry_safe(req, tmp, &local, list) {
+ list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) {
dwc3_gadget_ep_skip_trbs(dep, req);
switch (req->status) {
case DWC3_REQUEST_STATUS_DISCONNECTED:
@@ -1765,9 +1761,6 @@ restart:
break;
}
}
-
- if (!list_empty(&dep->cancelled_list))
- goto restart;
}
static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
@@ -2963,12 +2956,8 @@ static void dwc3_gadget_ep_cleanup_compl
{
struct dwc3_request *req;
struct dwc3_request *tmp;
- struct list_head local;
-restart:
- list_replace_init(&dep->started_list, &local);
-
- list_for_each_entry_safe(req, tmp, &local, list) {
+ list_for_each_entry_safe(req, tmp, &dep->started_list, list) {
int ret;
ret = dwc3_gadget_ep_cleanup_completed_request(dep, event,
@@ -2976,9 +2965,6 @@ restart:
if (ret)
break;
}
-
- if (!list_empty(&dep->started_list))
- goto restart;
}
static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep)
From: Liang Wang <[email protected]>
commit 854f32648b8a5e424d682953b1a9f3b7c3322701 upstream.
The physical address may exceed 32 bits on 32-bit systems with more than
32 bits of physcial address. Use PFN_PHYS() in devmem_is_allowed(), or
the physical address may overflow and be truncated.
We found this bug when mapping a high addresses through devmem tool,
when CONFIG_STRICT_DEVMEM is enabled on the ARM with ARM_LPAE and devmem
is used to map a high address that is not in the iomem address range, an
unexpected error indicating no permission is returned.
This bug was initially introduced from v2.6.37, and the function was
moved to lib in v5.11.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 087aaffcdf9c ("ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem")
Fixes: 527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
Signed-off-by: Liang Wang <[email protected]>
Reviewed-by: Luis Chamberlain <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Russell King <[email protected]>
Cc: Liang Wang <[email protected]>
Cc: Xiaoming Ni <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: <[email protected]> [2.6.37+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/devmem_is_allowed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/lib/devmem_is_allowed.c
+++ b/lib/devmem_is_allowed.c
@@ -19,7 +19,7 @@
*/
int devmem_is_allowed(unsigned long pfn)
{
- if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+ if (iomem_is_exclusive(PFN_PHYS(pfn)))
return 0;
if (!page_is_ram(pfn))
return 1;
From: Hsuan-Chi Kuo <[email protected]>
commit b4d8a58f8dcfcc890f296696cadb76e77be44b5f upstream.
The desired behavior is to set the caller's filter count to thread's.
This value is reported via /proc, so this fixes the inaccurate count
exposed to userspace; it is not used for reference counting, etc.
Signed-off-by: Hsuan-Chi Kuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Wiktor Garbacz <[email protected]>
Signed-off-by: Wiktor Garbacz <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Kees Cook <[email protected]>
Cc: [email protected]
Fixes: c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/seccomp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -602,7 +602,7 @@ static inline void seccomp_sync_threads(
smp_store_release(&thread->seccomp.filter,
caller->seccomp.filter);
atomic_set(&thread->seccomp.filter_count,
- atomic_read(&thread->seccomp.filter_count));
+ atomic_read(&caller->seccomp.filter_count));
/*
* Don't let an unprivileged task work around
From: Hsin-Yi Wang <[email protected]>
[ Upstream commit 798a315fc359aa6dbe48e09d802aa59b7e158ffc ]
Some pin doesn't support PUPD register, if it fails and fallbacks with
bias_set_combo case, it will call mtk_pinconf_bias_set_pupd_r1_r0() to
modify the PUPD pin again.
Since the general bias set are either PU/PD or PULLSEL/PULLEN, try
bias_set or bias_set_rev1 for the other fallback case. If the pin
doesn't support neither PU/PD nor PULLSEL/PULLEN, it will return
-ENOTSUPP.
Fixes: 81bd1579b43e ("pinctrl: mediatek: Fix fallback call path")
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Zhiyong Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 5b3b048725cc..45ebdeba985a 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -925,12 +925,10 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
err = hw->soc->bias_set(hw, desc, pullup);
if (err)
return err;
- } else if (hw->soc->bias_set_combo) {
- err = hw->soc->bias_set_combo(hw, desc, pullup, arg);
- if (err)
- return err;
} else {
- return -ENOTSUPP;
+ err = mtk_pinconf_bias_set_rev1(hw, desc, pullup);
+ if (err)
+ err = mtk_pinconf_bias_set(hw, desc, pullup);
}
}
--
2.30.2
From: Takashi Iwai <[email protected]>
commit 8b5d95313b6d30f642e4ed0125891984c446604e upstream.
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/amd/acp-pcm-dma.c | 2 +-
sound/soc/amd/raven/acp3x-pcm-dma.c | 2 +-
sound/soc/amd/renoir/acp3x-pdm-dma.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -969,7 +969,7 @@ static int acp_dma_hw_params(struct snd_
acp_set_sram_bank_state(rtd->acp_mmio, 0, true);
/* Save for runtime private data */
- rtd->dma_addr = substream->dma_buffer.addr;
+ rtd->dma_addr = runtime->dma_addr;
rtd->order = get_order(size);
/* Fill the page table entries in ACP SRAM */
--- a/sound/soc/amd/raven/acp3x-pcm-dma.c
+++ b/sound/soc/amd/raven/acp3x-pcm-dma.c
@@ -286,7 +286,7 @@ static int acp3x_dma_hw_params(struct sn
pr_err("pinfo failed\n");
}
size = params_buffer_bytes(params);
- rtd->dma_addr = substream->dma_buffer.addr;
+ rtd->dma_addr = substream->runtime->dma_addr;
rtd->num_pages = (PAGE_ALIGN(size) >> PAGE_SHIFT);
config_acp3x_dma(rtd, substream->stream);
return 0;
--- a/sound/soc/amd/renoir/acp3x-pdm-dma.c
+++ b/sound/soc/amd/renoir/acp3x-pdm-dma.c
@@ -246,7 +246,7 @@ static int acp_pdm_dma_hw_params(struct
return -EINVAL;
size = params_buffer_bytes(params);
period_bytes = params_period_bytes(params);
- rtd->dma_addr = substream->dma_buffer.addr;
+ rtd->dma_addr = substream->runtime->dma_addr;
rtd->num_pages = (PAGE_ALIGN(size) >> PAGE_SHIFT);
config_acp_dma(rtd, substream->stream);
init_pdm_ring_buffer(MEM_WINDOW_START, size, period_bytes,
From: Uwe Kleine-König <[email protected]>
commit 9898cb24e454602beb6e17bacf9f97b26c85c955 upstream.
The ADS7950 requires that CS is deasserted after each SPI word. Before
commit e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
CPU usage") the driver used a message with one spi transfer per channel
where each but the last one had .cs_change set to enforce a CS toggle.
This was wrongly translated into a message with a single transfer and
.cs_change set which results in a CS toggle after each word but the
last which corrupts the first adc conversion of all readouts after the
first readout.
Fixes: e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage")
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Tested-by: David Lechner <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ti-ads7950.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -568,7 +568,6 @@ static int ti_ads7950_probe(struct spi_d
st->ring_xfer.tx_buf = &st->tx_buf[0];
st->ring_xfer.rx_buf = &st->rx_buf[0];
/* len will be set later */
- st->ring_xfer.cs_change = true;
spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
From: Eric Bernstein <[email protected]>
commit c90f6263f58a28c3d97b83679d6fd693b33dfd4e upstream.
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Anson Jacob <[email protected]>
Signed-off-by: Eric Bernstein <[email protected]>
Cc: [email protected]
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
@@ -1788,7 +1788,6 @@ static bool dcn30_split_stream_for_mpc_o
}
pri_pipe->next_odm_pipe = sec_pipe;
sec_pipe->prev_odm_pipe = pri_pipe;
- ASSERT(sec_pipe->top_pipe == NULL);
if (!sec_pipe->top_pipe)
sec_pipe->stream_res.opp = pool->opps[pipe_idx];
From: Mike Tipton <[email protected]>
[ Upstream commit f84f5b6f72e68bbaeb850b58ac167e4a3a47532a ]
We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.
Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Mike Tipton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/interconnect/qcom/icc-rpmh.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
index f6fae64861ce..27cc5f03611c 100644
--- a/drivers/interconnect/qcom/icc-rpmh.c
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -20,13 +20,18 @@ void qcom_icc_pre_aggregate(struct icc_node *node)
{
size_t i;
struct qcom_icc_node *qn;
+ struct qcom_icc_provider *qp;
qn = node->data;
+ qp = to_qcom_provider(node->provider);
for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
qn->sum_avg[i] = 0;
qn->max_peak[i] = 0;
}
+
+ for (i = 0; i < qn->num_bcms; i++)
+ qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
}
EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
@@ -44,10 +49,8 @@ int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
{
size_t i;
struct qcom_icc_node *qn;
- struct qcom_icc_provider *qp;
qn = node->data;
- qp = to_qcom_provider(node->provider);
if (!tag)
tag = QCOM_ICC_TAG_ALWAYS;
@@ -67,9 +70,6 @@ int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
*agg_avg += avg_bw;
*agg_peak = max_t(u32, *agg_peak, peak_bw);
- for (i = 0; i < qn->num_bcms; i++)
- qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
-
return 0;
}
EXPORT_SYMBOL_GPL(qcom_icc_aggregate);
--
2.30.2
From: Alex Deucher <[email protected]>
commit 7cbe08a930a132d84b4cf79953b00b074ec7a2a7 upstream.
There may be multiple instances and only one is harvested.
v2: fix typo in commit message
Fixes: 83a0b8639185 ("drm/amdgpu: add judgement when add ip blocks (v2)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1673
Reviewed-by: Guchun Chen <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
@@ -299,6 +299,9 @@ int amdgpu_discovery_reg_base_init(struc
ip->major, ip->minor,
ip->revision);
+ if (le16_to_cpu(ip->hw_id) == VCN_HWID)
+ adev->vcn.num_vcn_inst++;
+
for (k = 0; k < num_base_address; k++) {
/*
* convert the endianness of base addresses in place,
@@ -377,7 +380,7 @@ void amdgpu_discovery_harvest_ip(struct
{
struct binary_header *bhdr;
struct harvest_table *harvest_info;
- int i;
+ int i, vcn_harvest_count = 0;
bhdr = (struct binary_header *)adev->mman.discovery_bin;
harvest_info = (struct harvest_table *)(adev->mman.discovery_bin +
@@ -389,8 +392,7 @@ void amdgpu_discovery_harvest_ip(struct
switch (le32_to_cpu(harvest_info->list[i].hw_id)) {
case VCN_HWID:
- adev->harvest_ip_mask |= AMD_HARVEST_IP_VCN_MASK;
- adev->harvest_ip_mask |= AMD_HARVEST_IP_JPEG_MASK;
+ vcn_harvest_count++;
break;
case DMU_HWID:
adev->harvest_ip_mask |= AMD_HARVEST_IP_DMU_MASK;
@@ -399,6 +401,10 @@ void amdgpu_discovery_harvest_ip(struct
break;
}
}
+ if (vcn_harvest_count == adev->vcn.num_vcn_inst) {
+ adev->harvest_ip_mask |= AMD_HARVEST_IP_VCN_MASK;
+ adev->harvest_ip_mask |= AMD_HARVEST_IP_JPEG_MASK;
+ }
}
int amdgpu_discovery_get_gfx_info(struct amdgpu_device *adev)
From: Rohith Surabattula <[email protected]>
commit 41535701da3324b80029cabb501e86c4fafe339d upstream.
When rename is executed on directory which has files for which
close is deferred, then rename will fail with EACCES.
This patch will try to close all deferred files when EACCES is received
and retry rename on a directory.
Signed-off-by: Rohith Surabattula <[email protected]>
Cc: [email protected] # 5.13
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/inode.c | 19 +++++++++++++++++--
fs/cifs/misc.c | 16 +++++++++++-----
2 files changed, 28 insertions(+), 7 deletions(-)
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1637,7 +1637,7 @@ int cifs_unlink(struct inode *dir, struc
goto unlink_out;
}
- cifs_close_all_deferred_files(tcon);
+ cifs_close_deferred_file(CIFS_I(inode));
if (cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP &
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
rc = CIFSPOSIXDelFile(xid, tcon, full_path,
@@ -2096,6 +2096,7 @@ cifs_rename2(struct user_namespace *mnt_
FILE_UNIX_BASIC_INFO *info_buf_target;
unsigned int xid;
int rc, tmprc;
+ int retry_count = 0;
if (flags & ~RENAME_NOREPLACE)
return -EINVAL;
@@ -2125,10 +2126,24 @@ cifs_rename2(struct user_namespace *mnt_
goto cifs_rename_exit;
}
- cifs_close_all_deferred_files(tcon);
+ cifs_close_deferred_file(CIFS_I(d_inode(source_dentry)));
+ if (d_inode(target_dentry) != NULL)
+ cifs_close_deferred_file(CIFS_I(d_inode(target_dentry)));
+
rc = cifs_do_rename(xid, source_dentry, from_name, target_dentry,
to_name);
+ if (rc == -EACCES) {
+ while (retry_count < 3) {
+ cifs_close_all_deferred_files(tcon);
+ rc = cifs_do_rename(xid, source_dentry, from_name, target_dentry,
+ to_name);
+ if (rc != -EACCES)
+ break;
+ retry_count++;
+ }
+ }
+
/*
* No-replace is the natural behavior for CIFS, so skip unlink hacks.
*/
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -735,13 +735,19 @@ void
cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode)
{
struct cifsFileInfo *cfile = NULL;
- struct cifs_deferred_close *dclose;
+
+ if (cifs_inode == NULL)
+ return;
list_for_each_entry(cfile, &cifs_inode->openFileList, flist) {
- spin_lock(&cifs_inode->deferred_lock);
- if (cifs_is_deferred_close(cfile, &dclose))
- mod_delayed_work(deferredclose_wq, &cfile->deferred, 0);
- spin_unlock(&cifs_inode->deferred_lock);
+ if (delayed_work_pending(&cfile->deferred)) {
+ /*
+ * If there is no pending work, mod_delayed_work queues new work.
+ * So, Increase the ref count to avoid use-after-free.
+ */
+ if (!mod_delayed_work(deferredclose_wq, &cfile->deferred, 0))
+ cifsFileInfo_get(cfile);
+ }
}
}
From: Pavel Begunkov <[email protected]>
commit 43597aac1f87230cb565ab354d331682f13d3c7a upstream.
__io_rsrc_put_work() might need ->uring_lock, so nobody should wait for
rsrc nodes holding the mutex. However, that's exactly what
io_ring_ctx_free() does with io_wait_rsrc_data().
Split it into rsrc wait + dealloc, and move the first one out of the
lock.
Cc: [email protected]
Fixes: b60c8dce33895 ("io_uring: preparation for rsrc tagging")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/0130c5c2693468173ec1afab714e0885d2c9c363.1628559783.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/io_uring.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -8614,13 +8614,10 @@ static void io_req_caches_free(struct io
mutex_unlock(&ctx->uring_lock);
}
-static bool io_wait_rsrc_data(struct io_rsrc_data *data)
+static void io_wait_rsrc_data(struct io_rsrc_data *data)
{
- if (!data)
- return false;
- if (!atomic_dec_and_test(&data->refs))
+ if (data && !atomic_dec_and_test(&data->refs))
wait_for_completion(&data->done);
- return true;
}
static void io_ring_ctx_free(struct io_ring_ctx *ctx)
@@ -8632,10 +8629,14 @@ static void io_ring_ctx_free(struct io_r
ctx->mm_account = NULL;
}
+ /* __io_rsrc_put_work() may need uring_lock to progress, wait w/o it */
+ io_wait_rsrc_data(ctx->buf_data);
+ io_wait_rsrc_data(ctx->file_data);
+
mutex_lock(&ctx->uring_lock);
- if (io_wait_rsrc_data(ctx->buf_data))
+ if (ctx->buf_data)
__io_sqe_buffers_unregister(ctx);
- if (io_wait_rsrc_data(ctx->file_data))
+ if (ctx->file_data)
__io_sqe_files_unregister(ctx);
if (ctx->rings)
__io_cqring_overflow_flush(ctx, true);
From: Loic Poulain <[email protected]>
commit 34737e1320db6d51f0d140d5c684b9eb32f0da76 upstream.
Lockdep detected possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mhiwwan->rx_lock);
local_irq_disable();
lock(&mhi_cntrl->pm_lock);
lock(&mhiwwan->rx_lock);
<Interrupt>
lock(&mhi_cntrl->pm_lock);
*** DEADLOCK ***
To prevent this we need to disable the soft-interrupts when taking
the rx_lock.
Cc: [email protected]
Fixes: fa588eba632d ("net: Add Qcom WWAN control driver")
Reported-by: Thomas Perrot <[email protected]>
Signed-off-by: Loic Poulain <[email protected]>
Reviewed-by: Sergey Ryazanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wwan/mhi_wwan_ctrl.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/wwan/mhi_wwan_ctrl.c
+++ b/drivers/net/wwan/mhi_wwan_ctrl.c
@@ -41,14 +41,14 @@ struct mhi_wwan_dev {
/* Increment RX budget and schedule RX refill if necessary */
static void mhi_wwan_rx_budget_inc(struct mhi_wwan_dev *mhiwwan)
{
- spin_lock(&mhiwwan->rx_lock);
+ spin_lock_bh(&mhiwwan->rx_lock);
mhiwwan->rx_budget++;
if (test_bit(MHI_WWAN_RX_REFILL, &mhiwwan->flags))
schedule_work(&mhiwwan->rx_refill);
- spin_unlock(&mhiwwan->rx_lock);
+ spin_unlock_bh(&mhiwwan->rx_lock);
}
/* Decrement RX budget if non-zero and return true on success */
@@ -56,7 +56,7 @@ static bool mhi_wwan_rx_budget_dec(struc
{
bool ret = false;
- spin_lock(&mhiwwan->rx_lock);
+ spin_lock_bh(&mhiwwan->rx_lock);
if (mhiwwan->rx_budget) {
mhiwwan->rx_budget--;
@@ -64,7 +64,7 @@ static bool mhi_wwan_rx_budget_dec(struc
ret = true;
}
- spin_unlock(&mhiwwan->rx_lock);
+ spin_unlock_bh(&mhiwwan->rx_lock);
return ret;
}
@@ -130,9 +130,9 @@ static void mhi_wwan_ctrl_stop(struct ww
{
struct mhi_wwan_dev *mhiwwan = wwan_port_get_drvdata(port);
- spin_lock(&mhiwwan->rx_lock);
+ spin_lock_bh(&mhiwwan->rx_lock);
clear_bit(MHI_WWAN_RX_REFILL, &mhiwwan->flags);
- spin_unlock(&mhiwwan->rx_lock);
+ spin_unlock_bh(&mhiwwan->rx_lock);
cancel_work_sync(&mhiwwan->rx_refill);
From: Rohith Surabattula <[email protected]>
commit 9e992755be8f2d458a0bcbefd19e493483c1dba2 upstream.
During unlink/rename/lease break, deferred work for close is
scheduled immediately but in an asynchronous manner which might
lead to race with actual(unlink/rename) commands.
This change will schedule close synchronously which will avoid
the race conditions with other commands.
Signed-off-by: Rohith Surabattula <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Cc: [email protected] # 5.13
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifsglob.h | 5 +++++
fs/cifs/file.c | 35 +++++++++++++++++------------------
fs/cifs/misc.c | 46 ++++++++++++++++++++++++++++++++++------------
3 files changed, 56 insertions(+), 30 deletions(-)
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1615,6 +1615,11 @@ struct dfs_info3_param {
int ttl;
};
+struct file_list {
+ struct list_head list;
+ struct cifsFileInfo *cfile;
+};
+
/*
* common struct for holding inode info when searching for or updating an
* inode with new info
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -4860,34 +4860,33 @@ void cifs_oplock_break(struct work_struc
oplock_break_ack:
/*
- * releasing stale oplock after recent reconnect of smb session using
- * a now incorrect file handle is not a data integrity issue but do
- * not bother sending an oplock release if session to server still is
- * disconnected since oplock already released by the server
- */
- if (!cfile->oplock_break_cancelled) {
- rc = tcon->ses->server->ops->oplock_response(tcon, &cfile->fid,
- cinode);
- cifs_dbg(FYI, "Oplock release rc = %d\n", rc);
- }
- /*
* When oplock break is received and there are no active
* file handles but cached, then schedule deferred close immediately.
* So, new open will not use cached handle.
*/
spin_lock(&CIFS_I(inode)->deferred_lock);
is_deferred = cifs_is_deferred_close(cfile, &dclose);
+ spin_unlock(&CIFS_I(inode)->deferred_lock);
if (is_deferred &&
cfile->deferred_close_scheduled &&
delayed_work_pending(&cfile->deferred)) {
- /*
- * If there is no pending work, mod_delayed_work queues new work.
- * So, Increase the ref count to avoid use-after-free.
- */
- if (!mod_delayed_work(deferredclose_wq, &cfile->deferred, 0))
- cifsFileInfo_get(cfile);
+ if (cancel_delayed_work(&cfile->deferred)) {
+ _cifsFileInfo_put(cfile, false, false);
+ goto oplock_break_done;
+ }
}
- spin_unlock(&CIFS_I(inode)->deferred_lock);
+ /*
+ * releasing stale oplock after recent reconnect of smb session using
+ * a now incorrect file handle is not a data integrity issue but do
+ * not bother sending an oplock release if session to server still is
+ * disconnected since oplock already released by the server
+ */
+ if (!cfile->oplock_break_cancelled) {
+ rc = tcon->ses->server->ops->oplock_response(tcon, &cfile->fid,
+ cinode);
+ cifs_dbg(FYI, "Oplock release rc = %d\n", rc);
+ }
+oplock_break_done:
_cifsFileInfo_put(cfile, false /* do not wait for ourself */, false);
cifs_done_oplock_break(cinode);
}
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -735,20 +735,32 @@ void
cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode)
{
struct cifsFileInfo *cfile = NULL;
+ struct file_list *tmp_list, *tmp_next_list;
+ struct list_head file_head;
if (cifs_inode == NULL)
return;
+ INIT_LIST_HEAD(&file_head);
+ spin_lock(&cifs_inode->open_file_lock);
list_for_each_entry(cfile, &cifs_inode->openFileList, flist) {
if (delayed_work_pending(&cfile->deferred)) {
- /*
- * If there is no pending work, mod_delayed_work queues new work.
- * So, Increase the ref count to avoid use-after-free.
- */
- if (!mod_delayed_work(deferredclose_wq, &cfile->deferred, 0))
- cifsFileInfo_get(cfile);
+ if (cancel_delayed_work(&cfile->deferred)) {
+ tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
+ if (tmp_list == NULL)
+ continue;
+ tmp_list->cfile = cfile;
+ list_add_tail(&tmp_list->list, &file_head);
+ }
}
}
+ spin_unlock(&cifs_inode->open_file_lock);
+
+ list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) {
+ _cifsFileInfo_put(tmp_list->cfile, true, false);
+ list_del(&tmp_list->list);
+ kfree(tmp_list);
+ }
}
void
@@ -756,20 +768,30 @@ cifs_close_all_deferred_files(struct cif
{
struct cifsFileInfo *cfile;
struct list_head *tmp;
+ struct file_list *tmp_list, *tmp_next_list;
+ struct list_head file_head;
+ INIT_LIST_HEAD(&file_head);
spin_lock(&tcon->open_file_lock);
list_for_each(tmp, &tcon->openFileList) {
cfile = list_entry(tmp, struct cifsFileInfo, tlist);
if (delayed_work_pending(&cfile->deferred)) {
- /*
- * If there is no pending work, mod_delayed_work queues new work.
- * So, Increase the ref count to avoid use-after-free.
- */
- if (!mod_delayed_work(deferredclose_wq, &cfile->deferred, 0))
- cifsFileInfo_get(cfile);
+ if (cancel_delayed_work(&cfile->deferred)) {
+ tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
+ if (tmp_list == NULL)
+ continue;
+ tmp_list->cfile = cfile;
+ list_add_tail(&tmp_list->list, &file_head);
+ }
}
}
spin_unlock(&tcon->open_file_lock);
+
+ list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) {
+ _cifsFileInfo_put(tmp_list->cfile, true, false);
+ list_del(&tmp_list->list);
+ kfree(tmp_list);
+ }
}
/* parses DFS refferal V3 structure
From: Ronnie Sahlberg <[email protected]>
commit 981567bd965329df7e64b13e92a54da816c1e0a4 upstream.
RHBZ: 1972502
PATH_MAX is 4096 but PAGE_SIZE can be >4096 on some architectures
such as ppc and would thus write beyond the end of the actual object.
Cc: <[email protected]>
Reported-by: Xiaoli Feng <[email protected]>
Suggested-by: Brian foster <[email protected]>
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/dir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -112,7 +112,7 @@ build_path_from_dentry_optional_prefix(s
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_USE_PREFIX_PATH)
pplen = cifs_sb->prepath ? strlen(cifs_sb->prepath) + 1 : 0;
- s = dentry_path_raw(direntry, page, PAGE_SIZE);
+ s = dentry_path_raw(direntry, page, PATH_MAX);
if (IS_ERR(s))
return s;
if (!s[1]) // for root we want "", not "/"
From: Richard Fitzgerald <[email protected]>
[ Upstream commit f1040e86f83b0f7d5f45724500a6a441731ff4b7 ]
Both SCLK and PLL clocks must be running to drive the glitch-free mux
behind MCLK_SRC_SEL and complete the switchover.
This patch moves the writing of MCLK_SRC_SEL to when the PLL is started
and stopped, so that it only transitions while the PLL is running.
The unconditional write MCLK_SRC_SEL=0 in cs42l42_mute_stream() is safe
because if the PLL is not running MCLK_SRC_SEL is already 0.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 43fc357199f9 ("ASoC: cs42l42: Set clock source for both ways of stream")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 25 ++++++++++++++++++-------
sound/soc/codecs/cs42l42.h | 1 +
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 22d8c8d03308..7b102a05a1b6 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -609,6 +609,8 @@ static int cs42l42_pll_config(struct snd_soc_component *component)
for (i = 0; i < ARRAY_SIZE(pll_ratio_table); i++) {
if (pll_ratio_table[i].sclk == clk) {
+ cs42l42->pll_config = i;
+
/* Configure the internal sample rate */
snd_soc_component_update_bits(component, CS42L42_MCLK_CTL,
CS42L42_INTERNAL_FS_MASK,
@@ -617,14 +619,9 @@ static int cs42l42_pll_config(struct snd_soc_component *component)
(pll_ratio_table[i].mclk_int !=
24000000)) <<
CS42L42_INTERNAL_FS_SHIFT);
- /* Set the MCLK src (PLL or SCLK) and the divide
- * ratio
- */
+
snd_soc_component_update_bits(component, CS42L42_MCLK_SRC_SEL,
- CS42L42_MCLK_SRC_SEL_MASK |
CS42L42_MCLKDIV_MASK,
- (pll_ratio_table[i].mclk_src_sel
- << CS42L42_MCLK_SRC_SEL_SHIFT) |
(pll_ratio_table[i].mclk_div <<
CS42L42_MCLKDIV_SHIFT));
/* Set up the LRCLK */
@@ -882,13 +879,21 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
*/
regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_osc_seq,
ARRAY_SIZE(cs42l42_to_osc_seq));
+
+ /* Must disconnect PLL before stopping it */
+ snd_soc_component_update_bits(component,
+ CS42L42_MCLK_SRC_SEL,
+ CS42L42_MCLK_SRC_SEL_MASK,
+ 0);
+ usleep_range(100, 200);
+
snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
CS42L42_PLL_START_MASK, 0);
}
} else {
if (!cs42l42->stream_use) {
/* SCLK must be running before codec unmute */
- if ((cs42l42->bclk < 11289600) && (cs42l42->sclk < 11289600)) {
+ if (pll_ratio_table[cs42l42->pll_config].mclk_src_sel) {
snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
CS42L42_PLL_START_MASK, 1);
@@ -909,6 +914,12 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
CS42L42_PLL_LOCK_TIMEOUT_US);
if (ret < 0)
dev_warn(component->dev, "PLL failed to lock: %d\n", ret);
+
+ /* PLL must be running to drive glitchless switch logic */
+ snd_soc_component_update_bits(component,
+ CS42L42_MCLK_SRC_SEL,
+ CS42L42_MCLK_SRC_SEL_MASK,
+ CS42L42_MCLK_SRC_SEL_MASK);
}
/* Mark SCLK as present, turn off internal oscillator */
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 5384105afe50..38fd91a168ae 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -775,6 +775,7 @@ struct cs42l42_private {
struct gpio_desc *reset_gpio;
struct completion pdn_done;
struct snd_soc_jack jack;
+ int pll_config;
int bclk;
u32 sclk;
u32 srate;
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit ee86f680ff4c9b406d49d4e22ddf10805b8a2137 ]
The ADC volume is a signed 8-bit number with range -97 to +12,
with -97 being mute. Use a SOC_SINGLE_S8_TLV() to define this
and fix the DECLARE_TLV_DB_SCALE() to have the correct start and
mute flag.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 8434c48354f1..3956912e23ac 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -404,7 +404,7 @@ static const struct regmap_config cs42l42_regmap = {
.use_single_write = true,
};
-static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);
+static DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 100, true);
static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
static const char * const cs42l42_hpf_freq_text[] = {
@@ -443,8 +443,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
CS42L42_ADC_INV_SHIFT, true, false),
SOC_SINGLE("ADC Boost Switch", CS42L42_ADC_CTL,
CS42L42_ADC_DIG_BOOST_SHIFT, true, false),
- SOC_SINGLE_SX_TLV("ADC Volume", CS42L42_ADC_VOLUME,
- CS42L42_ADC_VOL_SHIFT, 0xA0, 0x6C, adc_tlv),
+ SOC_SINGLE_S8_TLV("ADC Volume", CS42L42_ADC_VOLUME, -97, 12, adc_tlv),
SOC_SINGLE("ADC WNF Switch", CS42L42_ADC_WNF_HPF_CTL,
CS42L42_ADC_WNF_EN_SHIFT, true, false),
SOC_SINGLE("ADC HPF Switch", CS42L42_ADC_WNF_HPF_CTL,
--
2.30.2
From: Guennadi Liakhovetski <[email protected]>
[ Upstream commit 973b393fdf073a4ebd8d82ef6edea99fedc74af9 ]
Checking that two values don't have common bits makes no sense,
strict equality is meant.
Fixes: f3b433e4699f ("ASoC: SOF: Implement Probe IPC API")
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda-ipc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c
index c91aa951df22..acfeca42604c 100644
--- a/sound/soc/sof/intel/hda-ipc.c
+++ b/sound/soc/sof/intel/hda-ipc.c
@@ -107,8 +107,8 @@ void hda_dsp_ipc_get_reply(struct snd_sof_dev *sdev)
} else {
/* reply correct size ? */
if (reply.hdr.size != msg->reply_size &&
- /* getter payload is never known upfront */
- !(reply.hdr.cmd & SOF_IPC_GLB_PROBE)) {
+ /* getter payload is never known upfront */
+ ((reply.hdr.cmd & SOF_GLB_TYPE_MASK) != SOF_IPC_GLB_PROBE)) {
dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
msg->reply_size, reply.hdr.size);
ret = -EINVAL;
--
2.30.2
From: Dongliang Mu <[email protected]>
[ Upstream commit e9faf53c5a5d01f6f2a09ae28ec63a3bbd6f64fd ]
Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE,
MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID and MAC802154_HWSIM_EDGE_ATTR_LQI
must be present to fix GPF.
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Dongliang Mu <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ieee802154/mac802154_hwsim.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ieee802154/mac802154_hwsim.c b/drivers/net/ieee802154/mac802154_hwsim.c
index ebc976b7fcc2..cae52bfb871e 100644
--- a/drivers/net/ieee802154/mac802154_hwsim.c
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -528,14 +528,14 @@ static int hwsim_set_edge_lqi(struct sk_buff *msg, struct genl_info *info)
u32 v0, v1;
u8 lqi;
- if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] &&
+ if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] ||
!info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE])
return -EINVAL;
if (nla_parse_nested_deprecated(edge_attrs, MAC802154_HWSIM_EDGE_ATTR_MAX, info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE], hwsim_edge_policy, NULL))
return -EINVAL;
- if (!edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID] &&
+ if (!edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID] ||
!edge_attrs[MAC802154_HWSIM_EDGE_ATTR_LQI])
return -EINVAL;
--
2.30.2
From: Solomon Chiu <[email protected]>
commit 46dd2965bdd1c5a4f6499c73ff32e636fa8f9769 upstream.
[Why]
With kernel module parameter "freesync_video" is enabled, if the mode
is changed to preferred mode(the mode with highest rate), then Freesync
fails because the preferred mode is treated as one of freesync video
mode, and then be configurated as freesync video mode(fixed refresh
rate).
[How]
Skip freesync fixed rate configurating when modeset to preferred mode.
Signed-off-by: Solomon Chiu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -9410,7 +9410,12 @@ static int dm_update_crtc_state(struct a
} else if (amdgpu_freesync_vid_mode && aconnector &&
is_freesync_video_mode(&new_crtc_state->mode,
aconnector)) {
- set_freesync_fixed_config(dm_new_crtc_state);
+ struct drm_display_mode *high_mode;
+
+ high_mode = get_highest_refresh_rate_mode(aconnector, false);
+ if (!drm_mode_equal(&new_crtc_state->mode, high_mode)) {
+ set_freesync_fixed_config(dm_new_crtc_state);
+ }
}
ret = dm_atomic_get_state(state, &dm_state);
From: Shyam Prasad N <[email protected]>
commit 7d3fc01796fc895e5fcce45c994c5a8db8120a8d upstream.
We used to follow the rule earlier that the create SD context
always be a multiple of 8. However, with the change:
cifs: refactor create_sd_buf() and and avoid corrupting the buffer
...we recompute the length, and we failed that rule.
Fixing that with this change.
Cc: <[email protected]> # v5.10+
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2pdu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2375,7 +2375,7 @@ create_sd_buf(umode_t mode, bool set_own
memcpy(aclptr, &acl, sizeof(struct cifs_acl));
buf->ccontext.DataLength = cpu_to_le32(ptr - (__u8 *)&buf->sd);
- *len = ptr - (__u8 *)buf;
+ *len = roundup(ptr - (__u8 *)buf, 8);
return buf;
}
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 926ef1a4c245c093acc07807e466ad2ef0ff6ccb ]
An I2S frame always has a left and right channel slot even if mono
data is being sent. So if channels==1 the actual bitclock frequency
is 2 * snd_soc_params_to_bclk(params).
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2cdba9b045c7 ("ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 0d31c84b0445..fe73a5c70bdd 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -820,6 +820,10 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
cs42l42->srate = params_rate(params);
cs42l42->bclk = snd_soc_params_to_bclk(params);
+ /* I2S frame always has 2 channels even for mono audio */
+ if (channels == 1)
+ cs42l42->bclk *= 2;
+
switch(substream->stream) {
case SNDRV_PCM_STREAM_CAPTURE:
if (channels == 2) {
--
2.30.2
From: Dongliang Mu <[email protected]>
[ Upstream commit 889d0e7dc68314a273627d89cbb60c09e1cc1c25 ]
Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE
must be present to fix GPF.
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Dongliang Mu <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ieee802154/mac802154_hwsim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/mac802154_hwsim.c b/drivers/net/ieee802154/mac802154_hwsim.c
index cae52bfb871e..8caa61ec718f 100644
--- a/drivers/net/ieee802154/mac802154_hwsim.c
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -418,7 +418,7 @@ static int hwsim_new_edge_nl(struct sk_buff *msg, struct genl_info *info)
struct hwsim_edge *e;
u32 v0, v1;
- if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] &&
+ if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] ||
!info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE])
return -EINVAL;
--
2.30.2
From: Yajun Deng <[email protected]>
[ Upstream commit 38ea9def5b62f9193f6bad96c5d108e2830ecbde ]
It should be added kfree_skb_list() when err is not equal to zero
in nf_br_ip_fragment().
v2: keep this aligned with IPv6.
v3: modify iter.frag_list to iter.frag.
Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Signed-off-by: Yajun Deng <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/netfilter/nf_conntrack_bridge.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c
index 8d033a75a766..fdbed3158555 100644
--- a/net/bridge/netfilter/nf_conntrack_bridge.c
+++ b/net/bridge/netfilter/nf_conntrack_bridge.c
@@ -88,6 +88,12 @@ static int nf_br_ip_fragment(struct net *net, struct sock *sk,
skb = ip_fraglist_next(&iter);
}
+
+ if (!err)
+ return 0;
+
+ kfree_skb_list(iter.frag);
+
return err;
}
slow_path:
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 30615bd21b4cc3c3bb5ae8bd70e2a915cc5f75c7 ]
The underlying register field has inverted sense (0 = enabled) so
the control definition must be marked as inverted.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index fe73a5c70bdd..c7fb33a89224 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -436,7 +436,7 @@ static SOC_ENUM_SINGLE_DECL(cs42l42_wnf05_freq_enum, CS42L42_ADC_WNF_HPF_CTL,
static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
/* ADC Volume and Filter Controls */
SOC_SINGLE("ADC Notch Switch", CS42L42_ADC_CTL,
- CS42L42_ADC_NOTCH_DIS_SHIFT, true, false),
+ CS42L42_ADC_NOTCH_DIS_SHIFT, true, true),
SOC_SINGLE("ADC Weak Force Switch", CS42L42_ADC_CTL,
CS42L42_ADC_FORCE_WEAK_VCM_SHIFT, true, false),
SOC_SINGLE("ADC Invert Switch", CS42L42_ADC_CTL,
--
2.30.2
From: Anson Jacob <[email protected]>
commit 0cde63a8fc4d9f9f580c297211fd05f91c0fd66d upstream.
Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work
can't sleep.
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H
CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G W OE 5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8
Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
Workqueue: events_highpri dm_irq_work_func [amdgpu]
Call Trace:
<IRQ>
dump_stack+0x5e/0x74
___might_sleep.cold+0x87/0x98
__might_sleep+0x4b/0x80
kmem_cache_alloc_trace+0x390/0x4f0
amdgpu_dm_irq_handler+0x171/0x230 [amdgpu]
amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu]
amdgpu_ih_process+0x81/0x100 [amdgpu]
amdgpu_irq_handler+0x26/0xa0 [amdgpu]
__handle_irq_event_percpu+0x49/0x190
? __hrtimer_get_next_event+0x4d/0x80
handle_irq_event_percpu+0x33/0x80
handle_irq_event+0x33/0x60
handle_edge_irq+0x82/0x190
asm_call_irq_on_stack+0x12/0x20
</IRQ>
common_interrupt+0xbb/0x140
asm_common_interrupt+0x1e/0x40
RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu]
Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3
RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286
RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000
RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430
R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430
? amdgpu_cgs_write_register+0x20/0x20 [amdgpu]
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x38/0xb0 [amdgpu]
generic_reg_wait+0x80/0x160 [amdgpu]
dce_aux_transfer_raw+0x324/0x7c0 [amdgpu]
dc_link_aux_transfer_raw+0x43/0x50 [amdgpu]
dm_dp_aux_transfer+0x87/0x110 [amdgpu]
drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper]
drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper]
? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper]
dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu]
? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu]
handle_hpd_rx_irq+0x195/0x240 [amdgpu]
? __switch_to_asm+0x42/0x70
? __switch_to+0x131/0x450
dm_irq_work_func+0x19/0x20 [amdgpu]
process_one_work+0x209/0x400
worker_thread+0x4d/0x3e0
? cancel_delayed_work+0xa0/0xa0
kthread+0x124/0x160
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
Reviewed-by: Aurabindo Jayamohanan Pillai <[email protected]>
Acked-by: Anson Jacob <[email protected]>
Signed-off-by: Anson Jacob <[email protected]>
Cc: [email protected]
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c
@@ -584,7 +584,7 @@ static void amdgpu_dm_irq_schedule_work(
handler_data = container_of(handler_list->next, struct amdgpu_dm_irq_handler_data, list);
/*allocate a new amdgpu_dm_irq_handler_data*/
- handler_data_add = kzalloc(sizeof(*handler_data), GFP_KERNEL);
+ handler_data_add = kzalloc(sizeof(*handler_data), GFP_ATOMIC);
if (!handler_data_add) {
DRM_ERROR("DM_IRQ: failed to allocate irq handler!\n");
return;
From: Alex Deucher <[email protected]>
commit 202ead5a3c589b0594a75cb99f080174f6851fed upstream.
If the platform uses BOCO, don't use BACO in runtime suspend.
We could end up executing the BACO path if the platform supports
both.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -1537,6 +1537,8 @@ static int amdgpu_pmops_runtime_suspend(
pci_ignore_hotplug(pdev);
pci_set_power_state(pdev, PCI_D3cold);
drm_dev->switch_power_state = DRM_SWITCH_POWER_DYNAMIC_OFF;
+ } else if (amdgpu_device_supports_boco(drm_dev)) {
+ /* nothing to do */
} else if (amdgpu_device_supports_baco(drm_dev)) {
amdgpu_device_baco_enter(drm_dev);
}
From: Andy Shevchenko <[email protected]>
[ Upstream commit 2f658f7a3953f6d70bab90e117aff8d0ad44e200 ]
The software mapping for GPIO, which initially comes from Microsoft,
is subject to change by respective Windows and firmware developers.
Due to the above the driver had been written and published way ahead
of the schedule, and thus the numbering schema used in it is outdated.
Fix the numbering schema in accordance with the real products on market.
Fixes: 653d96455e1e ("pinctrl: tigerlake: Add support for Tiger Lake-H")
Reported-and-tested-by: Kai-Heng Feng <[email protected]>
Reported-by: Riccardo Mori <[email protected]>
Reported-and-tested-by: Lovesh <[email protected]>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213463
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213579
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213857
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/intel/pinctrl-tigerlake.c | 26 +++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-tigerlake.c b/drivers/pinctrl/intel/pinctrl-tigerlake.c
index 75b6d66955bf..3ddaeffc0415 100644
--- a/drivers/pinctrl/intel/pinctrl-tigerlake.c
+++ b/drivers/pinctrl/intel/pinctrl-tigerlake.c
@@ -701,32 +701,32 @@ static const struct pinctrl_pin_desc tglh_pins[] = {
static const struct intel_padgroup tglh_community0_gpps[] = {
TGL_GPP(0, 0, 24, 0), /* GPP_A */
- TGL_GPP(1, 25, 44, 128), /* GPP_R */
- TGL_GPP(2, 45, 70, 32), /* GPP_B */
- TGL_GPP(3, 71, 78, INTEL_GPIO_BASE_NOMAP), /* vGPIO_0 */
+ TGL_GPP(1, 25, 44, 32), /* GPP_R */
+ TGL_GPP(2, 45, 70, 64), /* GPP_B */
+ TGL_GPP(3, 71, 78, 96), /* vGPIO_0 */
};
static const struct intel_padgroup tglh_community1_gpps[] = {
- TGL_GPP(0, 79, 104, 96), /* GPP_D */
- TGL_GPP(1, 105, 128, 64), /* GPP_C */
- TGL_GPP(2, 129, 136, 160), /* GPP_S */
- TGL_GPP(3, 137, 153, 192), /* GPP_G */
- TGL_GPP(4, 154, 180, 224), /* vGPIO */
+ TGL_GPP(0, 79, 104, 128), /* GPP_D */
+ TGL_GPP(1, 105, 128, 160), /* GPP_C */
+ TGL_GPP(2, 129, 136, 192), /* GPP_S */
+ TGL_GPP(3, 137, 153, 224), /* GPP_G */
+ TGL_GPP(4, 154, 180, 256), /* vGPIO */
};
static const struct intel_padgroup tglh_community3_gpps[] = {
- TGL_GPP(0, 181, 193, 256), /* GPP_E */
- TGL_GPP(1, 194, 217, 288), /* GPP_F */
+ TGL_GPP(0, 181, 193, 288), /* GPP_E */
+ TGL_GPP(1, 194, 217, 320), /* GPP_F */
};
static const struct intel_padgroup tglh_community4_gpps[] = {
- TGL_GPP(0, 218, 241, 320), /* GPP_H */
+ TGL_GPP(0, 218, 241, 352), /* GPP_H */
TGL_GPP(1, 242, 251, 384), /* GPP_J */
- TGL_GPP(2, 252, 266, 352), /* GPP_K */
+ TGL_GPP(2, 252, 266, 416), /* GPP_K */
};
static const struct intel_padgroup tglh_community5_gpps[] = {
- TGL_GPP(0, 267, 281, 416), /* GPP_I */
+ TGL_GPP(0, 267, 281, 448), /* GPP_I */
TGL_GPP(1, 282, 290, INTEL_GPIO_BASE_NOMAP), /* JTAG */
};
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 0c2f2ad4f16a58879463d0979a54293f8f296d6f ]
An I2S frame starts on the falling edge of LRCLK so ASP_STP must
be 0.
At the same time, move other format settings in the same register
from cs42l42_pll_config() to cs42l42_set_dai_fmt() where you'd
expect to find them, and merge into a single write.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 7b102a05a1b6..0c8cdfe78d96 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -657,15 +657,6 @@ static int cs42l42_pll_config(struct snd_soc_component *component)
CS42L42_FSYNC_PULSE_WIDTH_MASK,
CS42L42_FRAC1_VAL(fsync - 1) <<
CS42L42_FSYNC_PULSE_WIDTH_SHIFT);
- snd_soc_component_update_bits(component,
- CS42L42_ASP_FRM_CFG,
- CS42L42_ASP_5050_MASK,
- CS42L42_ASP_5050_MASK);
- /* Set the frame delay to 1.0 SCLK clocks */
- snd_soc_component_update_bits(component, CS42L42_ASP_FRM_CFG,
- CS42L42_ASP_FSD_MASK,
- CS42L42_ASP_FSD_1_0 <<
- CS42L42_ASP_FSD_SHIFT);
/* Set the sample rates (96k or lower) */
snd_soc_component_update_bits(component, CS42L42_FS_RATE_EN,
CS42L42_FS_EN_MASK,
@@ -765,6 +756,18 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
+ /*
+ * 5050 mode, frame starts on falling edge of LRCLK,
+ * frame delayed by 1.0 SCLKs
+ */
+ snd_soc_component_update_bits(component,
+ CS42L42_ASP_FRM_CFG,
+ CS42L42_ASP_STP_MASK |
+ CS42L42_ASP_5050_MASK |
+ CS42L42_ASP_FSD_MASK,
+ CS42L42_ASP_5050_MASK |
+ (CS42L42_ASP_FSD_1_0 <<
+ CS42L42_ASP_FSD_SHIFT));
break;
default:
return -EINVAL;
--
2.30.2
From: Takashi Iwai <[email protected]>
commit 827f3164aaa579eee6fd50c6654861d54f282a11 upstream.
Along with the transition to the managed PCM buffers, the driver now
accepts the dynamically allocated buffer, while it still kept the
reference to the old preallocated buffer address. This patch corrects
to the right reference via runtime->dma_addr.
(Although this might have been already buggy before the cleanup with
the managed buffer, let's put Fixes tag to point that; it's a corner
case, after all.)
Fixes: d55894bc2763 ("ASoC: uniphier: Use managed buffer allocation")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/uniphier/aio-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/uniphier/aio-dma.c
+++ b/sound/soc/uniphier/aio-dma.c
@@ -198,7 +198,7 @@ static int uniphier_aiodma_mmap(struct s
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
return remap_pfn_range(vma, vma->vm_start,
- substream->dma_buffer.addr >> PAGE_SHIFT,
+ substream->runtime->dma_addr >> PAGE_SHIFT,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
From: Chris Lesiak <[email protected]>
commit 84edec86f449adea9ee0b4912a79ab8d9d65abb7 upstream.
The datasheets have the following note for the conversion time
specification: "This parameter is specified by design and/or
characterization and it is not tested in production."
Parts have been seen that require more time to do 14-bit conversions for
the relative humidity channel. The result is ENXIO due to the address
phase of a transfer not getting an ACK.
Delay an additional 1 ms per conversion to allow for additional margin.
Fixes: 4839367d99e3 ("iio: humidity: add HDC100x support")
Signed-off-by: Chris Lesiak <[email protected]>
Acked-by: Matt Ranostay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/humidity/hdc100x.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -25,6 +25,8 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
+#include <linux/time.h>
+
#define HDC100X_REG_TEMP 0x00
#define HDC100X_REG_HUMIDITY 0x01
@@ -166,7 +168,7 @@ static int hdc100x_get_measurement(struc
struct iio_chan_spec const *chan)
{
struct i2c_client *client = data->client;
- int delay = data->adc_int_us[chan->address];
+ int delay = data->adc_int_us[chan->address] + 1*USEC_PER_MSEC;
int ret;
__be16 val;
@@ -316,7 +318,7 @@ static irqreturn_t hdc100x_trigger_handl
struct iio_dev *indio_dev = pf->indio_dev;
struct hdc100x_data *data = iio_priv(indio_dev);
struct i2c_client *client = data->client;
- int delay = data->adc_int_us[0] + data->adc_int_us[1];
+ int delay = data->adc_int_us[0] + data->adc_int_us[1] + 2*USEC_PER_MSEC;
int ret;
/* dual read starts at temp register */
From: Nadav Amit <[email protected]>
[ Upstream commit ef98eb0409c31c39ab55ff46b2721c3b4f84c122 ]
When using SQPOLL, the submission queue polling thread calls
task_work_run() to run queued work. However, when work is added with
TWA_SIGNAL - as done by io_uring itself - the TIF_NOTIFY_SIGNAL remains
set afterwards and is never cleared.
Consequently, when the submission queue polling thread checks whether
signal_pending(), it may always find a pending signal, if
task_work_add() was ever called before.
The impact of this bug might be different on different kernel versions.
It appears that on 5.14 it would only cause unnecessary calculation and
prevent the polling thread from sleeping. On 5.13, where the bug was
found, it stops the polling thread from finding newly submitted work.
Instead of task_work_run(), use tracehook_notify_signal() that clears
TIF_NOTIFY_SIGNAL. Test for TIF_NOTIFY_SIGNAL in addition to
current->task_works to avoid a race in which task_works is cleared but
the TIF_NOTIFY_SIGNAL is set.
Fixes: 685fe7feedb96 ("io-wq: eliminate the need for a manager thread")
Cc: Jens Axboe <[email protected]>
Cc: Pavel Begunkov <[email protected]>
Signed-off-by: Nadav Amit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 32f3df13a812..8a8507cab580 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -78,6 +78,7 @@
#include <linux/task_work.h>
#include <linux/pagemap.h>
#include <linux/io_uring.h>
+#include <linux/tracehook.h>
#define CREATE_TRACE_POINTS
#include <trace/events/io_uring.h>
@@ -2250,9 +2251,9 @@ static inline unsigned int io_put_rw_kbuf(struct io_kiocb *req)
static inline bool io_run_task_work(void)
{
- if (current->task_works) {
+ if (test_thread_flag(TIF_NOTIFY_SIGNAL) || current->task_works) {
__set_current_state(TASK_RUNNING);
- task_work_run();
+ tracehook_notify_signal();
return true;
}
--
2.30.2
From: John Hubbard <[email protected]>
[ Upstream commit 704e624f7b3e8a4fc1ce43fb564746d1d07b20c0 ]
On s390, the following build warning occurs:
drivers/net/ethernet/marvell/mvpp2/mvpp2.h:844:2: warning: overflow in
conversion from 'long unsigned int' to 'int' changes value from
'18446744073709551584' to '-32' [-Woverflow]
844 | ((total_size) - MVPP2_SKB_HEADROOM - MVPP2_SKB_SHINFO_SIZE)
This happens because MVPP2_SKB_SHINFO_SIZE, which is 320 bytes (which is
already 64-byte aligned) on some architectures, actually gets ALIGN'd up
to 512 bytes in the s390 case.
So then, when this is invoked:
MVPP2_RX_MAX_PKT_SIZE(MVPP2_BM_SHORT_FRAME_SIZE)
...that turns into:
704 - 224 - 512 == -32
...which is not a good frame size to end up with! The warning above is a
bit lucky: it notices a signed/unsigned bad behavior here, which leads
to the real problem of a frame that is too short for its contents.
Increase MVPP2_BM_SHORT_FRAME_SIZE by 32 (from 704 to 736), which is
just exactly big enough. (The other values can't readily be changed
without causing a lot of other problems.)
Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support")
Cc: Sven Auhagen <[email protected]>
Cc: Matteo Croce <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 4a61c90003b5..722209a14f53 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -938,7 +938,7 @@ enum mvpp22_ptp_packet_format {
#define MVPP2_BM_COOKIE_POOL_OFFS 8
#define MVPP2_BM_COOKIE_CPU_OFFS 24
-#define MVPP2_BM_SHORT_FRAME_SIZE 704 /* frame size 128 */
+#define MVPP2_BM_SHORT_FRAME_SIZE 736 /* frame size 128 */
#define MVPP2_BM_LONG_FRAME_SIZE 2240 /* frame size 1664 */
#define MVPP2_BM_JUMBO_FRAME_SIZE 10432 /* frame size 9856 */
/* BM short pool packet size
--
2.30.2
From: jason-jh.lin <[email protected]>
[ Upstream commit 1a64a7aff8da352c9419de3d5c34343682916411 ]
The cursor plane should use the current plane state in atomic_async_update
because it would not be the new plane state in the global atomic state
since _swap_state happened when those hook are run.
Fix cursor plane issue by below modification:
1. Remove plane_helper_funcs->atomic_update(plane, state) in
mtk_drm_crtc_async_update.
2. Add mtk_drm_update_new_state in to mtk_plane_atomic_async_update to
update the cursor plane by current plane state hook and update
others plane by the new_state.
Fixes: 37418bf14c13 ("drm: Use state helper instead of the plane state pointer")
Signed-off-by: jason-jh.lin <[email protected]>
Tested-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Chun-Kuang Hu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 3 --
drivers/gpu/drm/mediatek/mtk_drm_plane.c | 60 ++++++++++++++----------
2 files changed, 34 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 474efb844249..735efe79f075 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -532,13 +532,10 @@ void mtk_drm_crtc_async_update(struct drm_crtc *crtc, struct drm_plane *plane,
struct drm_atomic_state *state)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
- const struct drm_plane_helper_funcs *plane_helper_funcs =
- plane->helper_private;
if (!mtk_crtc->enabled)
return;
- plane_helper_funcs->atomic_update(plane, state);
mtk_drm_crtc_update_config(mtk_crtc, false);
}
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index b5582dcf564c..e6dcb34d3052 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -110,6 +110,35 @@ static int mtk_plane_atomic_async_check(struct drm_plane *plane,
true, true);
}
+static void mtk_plane_update_new_state(struct drm_plane_state *new_state,
+ struct mtk_plane_state *mtk_plane_state)
+{
+ struct drm_framebuffer *fb = new_state->fb;
+ struct drm_gem_object *gem;
+ struct mtk_drm_gem_obj *mtk_gem;
+ unsigned int pitch, format;
+ dma_addr_t addr;
+
+ gem = fb->obj[0];
+ mtk_gem = to_mtk_gem_obj(gem);
+ addr = mtk_gem->dma_addr;
+ pitch = fb->pitches[0];
+ format = fb->format->format;
+
+ addr += (new_state->src.x1 >> 16) * fb->format->cpp[0];
+ addr += (new_state->src.y1 >> 16) * pitch;
+
+ mtk_plane_state->pending.enable = true;
+ mtk_plane_state->pending.pitch = pitch;
+ mtk_plane_state->pending.format = format;
+ mtk_plane_state->pending.addr = addr;
+ mtk_plane_state->pending.x = new_state->dst.x1;
+ mtk_plane_state->pending.y = new_state->dst.y1;
+ mtk_plane_state->pending.width = drm_rect_width(&new_state->dst);
+ mtk_plane_state->pending.height = drm_rect_height(&new_state->dst);
+ mtk_plane_state->pending.rotation = new_state->rotation;
+}
+
static void mtk_plane_atomic_async_update(struct drm_plane *plane,
struct drm_atomic_state *state)
{
@@ -126,8 +155,10 @@ static void mtk_plane_atomic_async_update(struct drm_plane *plane,
plane->state->src_h = new_state->src_h;
plane->state->src_w = new_state->src_w;
swap(plane->state->fb, new_state->fb);
- new_plane_state->pending.async_dirty = true;
+ mtk_plane_update_new_state(new_state, new_plane_state);
+ wmb(); /* Make sure the above parameters are set before update */
+ new_plane_state->pending.async_dirty = true;
mtk_drm_crtc_async_update(new_state->crtc, plane, state);
}
@@ -189,14 +220,8 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
plane);
struct mtk_plane_state *mtk_plane_state = to_mtk_plane_state(new_state);
- struct drm_crtc *crtc = new_state->crtc;
- struct drm_framebuffer *fb = new_state->fb;
- struct drm_gem_object *gem;
- struct mtk_drm_gem_obj *mtk_gem;
- unsigned int pitch, format;
- dma_addr_t addr;
- if (!crtc || WARN_ON(!fb))
+ if (!new_state->crtc || WARN_ON(!new_state->fb))
return;
if (!new_state->visible) {
@@ -204,24 +229,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
return;
}
- gem = fb->obj[0];
- mtk_gem = to_mtk_gem_obj(gem);
- addr = mtk_gem->dma_addr;
- pitch = fb->pitches[0];
- format = fb->format->format;
-
- addr += (new_state->src.x1 >> 16) * fb->format->cpp[0];
- addr += (new_state->src.y1 >> 16) * pitch;
-
- mtk_plane_state->pending.enable = true;
- mtk_plane_state->pending.pitch = pitch;
- mtk_plane_state->pending.format = format;
- mtk_plane_state->pending.addr = addr;
- mtk_plane_state->pending.x = new_state->dst.x1;
- mtk_plane_state->pending.y = new_state->dst.y1;
- mtk_plane_state->pending.width = drm_rect_width(&new_state->dst);
- mtk_plane_state->pending.height = drm_rect_height(&new_state->dst);
- mtk_plane_state->pending.rotation = new_state->rotation;
+ mtk_plane_update_new_state(new_state, mtk_plane_state);
wmb(); /* Make sure the above parameters are set before update */
mtk_plane_state->pending.dirty = true;
}
--
2.30.2
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 6b994c554ebc4c065427f510db333081cbd7228d ]
The previous Kconfig cleanup added simplifications but also introduced
a new one by moving a boolean to a tristate. This leads to randconfig
problems.
This patch moves the select operations in the SOUNDWIRE_LINK_BASELINE
option. The INTEL_SOUNDWIRE config remains a tristate for backwards
compatibility with older configurations but is essentially an on/off
switch.
Fixes: cf5807f5f814f ('ASoC: SOF: Intel: SoundWire: simplify Kconfig')
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Tested-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig
index 4bce89b5ea40..4447f515e8b1 100644
--- a/sound/soc/sof/intel/Kconfig
+++ b/sound/soc/sof/intel/Kconfig
@@ -278,6 +278,8 @@ config SND_SOC_SOF_HDA
config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
tristate
+ select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE
+ select SND_INTEL_SOUNDWIRE_ACPI if SND_SOC_SOF_INTEL_SOUNDWIRE
config SND_SOC_SOF_INTEL_SOUNDWIRE
tristate "SOF support for SoundWire"
@@ -285,8 +287,6 @@ config SND_SOC_SOF_INTEL_SOUNDWIRE
depends on SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
depends on ACPI && SOUNDWIRE
depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y)
- select SOUNDWIRE_INTEL
- select SND_INTEL_SOUNDWIRE_ACPI
help
This adds support for SoundWire with Sound Open Firmware
for Intel(R) platforms.
--
2.30.2
From: Luis Henriques <[email protected]>
commit bf2ba432213fade50dd39f2e348085b758c0726e upstream.
Function ceph_check_delayed_caps() is called from the mdsc->delayed_work
workqueue and it can be kept looping for quite some time if caps keep
being added back to the mdsc->cap_delay_list. This may result in the
watchdog tainting the kernel with the softlockup flag.
This patch breaks this loop if the caps have been recently (i.e. during
the loop execution). Any new caps added to the list will be handled in
the next run.
Also, allow schedule_delayed() callers to explicitly set the delay value
instead of defaulting to 5s, so we can ensure that it runs soon
afterward if it looks like there is more work.
Cc: [email protected]
URL: https://tracker.ceph.com/issues/46284
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/caps.c | 17 ++++++++++++++++-
fs/ceph/mds_client.c | 25 ++++++++++++++++---------
fs/ceph/super.h | 2 +-
3 files changed, 33 insertions(+), 11 deletions(-)
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -4224,11 +4224,19 @@ bad:
/*
* Delayed work handler to process end of delayed cap release LRU list.
+ *
+ * If new caps are added to the list while processing it, these won't get
+ * processed in this run. In this case, the ci->i_hold_caps_max will be
+ * returned so that the work can be scheduled accordingly.
*/
-void ceph_check_delayed_caps(struct ceph_mds_client *mdsc)
+unsigned long ceph_check_delayed_caps(struct ceph_mds_client *mdsc)
{
struct inode *inode;
struct ceph_inode_info *ci;
+ struct ceph_mount_options *opt = mdsc->fsc->mount_options;
+ unsigned long delay_max = opt->caps_wanted_delay_max * HZ;
+ unsigned long loop_start = jiffies;
+ unsigned long delay = 0;
dout("check_delayed_caps\n");
spin_lock(&mdsc->cap_delay_lock);
@@ -4236,6 +4244,11 @@ void ceph_check_delayed_caps(struct ceph
ci = list_first_entry(&mdsc->cap_delay_list,
struct ceph_inode_info,
i_cap_delay_list);
+ if (time_before(loop_start, ci->i_hold_caps_max - delay_max)) {
+ dout("%s caps added recently. Exiting loop", __func__);
+ delay = ci->i_hold_caps_max;
+ break;
+ }
if ((ci->i_ceph_flags & CEPH_I_FLUSH) == 0 &&
time_before(jiffies, ci->i_hold_caps_max))
break;
@@ -4252,6 +4265,8 @@ void ceph_check_delayed_caps(struct ceph
}
}
spin_unlock(&mdsc->cap_delay_lock);
+
+ return delay;
}
/*
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -4502,22 +4502,29 @@ void inc_session_sequence(struct ceph_md
}
/*
- * delayed work -- periodically trim expired leases, renew caps with mds
+ * delayed work -- periodically trim expired leases, renew caps with mds. If
+ * the @delay parameter is set to 0 or if it's more than 5 secs, the default
+ * workqueue delay value of 5 secs will be used.
*/
-static void schedule_delayed(struct ceph_mds_client *mdsc)
+static void schedule_delayed(struct ceph_mds_client *mdsc, unsigned long delay)
{
- int delay = 5;
- unsigned hz = round_jiffies_relative(HZ * delay);
- schedule_delayed_work(&mdsc->delayed_work, hz);
+ unsigned long max_delay = HZ * 5;
+
+ /* 5 secs default delay */
+ if (!delay || (delay > max_delay))
+ delay = max_delay;
+ schedule_delayed_work(&mdsc->delayed_work,
+ round_jiffies_relative(delay));
}
static void delayed_work(struct work_struct *work)
{
- int i;
struct ceph_mds_client *mdsc =
container_of(work, struct ceph_mds_client, delayed_work.work);
+ unsigned long delay;
int renew_interval;
int renew_caps;
+ int i;
dout("mdsc delayed_work\n");
@@ -4557,7 +4564,7 @@ static void delayed_work(struct work_str
}
mutex_unlock(&mdsc->mutex);
- ceph_check_delayed_caps(mdsc);
+ delay = ceph_check_delayed_caps(mdsc);
ceph_queue_cap_reclaim_work(mdsc);
@@ -4565,7 +4572,7 @@ static void delayed_work(struct work_str
maybe_recover_session(mdsc);
- schedule_delayed(mdsc);
+ schedule_delayed(mdsc, delay);
}
int ceph_mdsc_init(struct ceph_fs_client *fsc)
@@ -5042,7 +5049,7 @@ void ceph_mdsc_handle_mdsmap(struct ceph
mdsc->mdsmap->m_epoch);
mutex_unlock(&mdsc->mutex);
- schedule_delayed(mdsc);
+ schedule_delayed(mdsc, 0);
return;
bad_unlock:
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -1170,7 +1170,7 @@ extern void ceph_flush_snaps(struct ceph
extern bool __ceph_should_report_size(struct ceph_inode_info *ci);
extern void ceph_check_caps(struct ceph_inode_info *ci, int flags,
struct ceph_mds_session *session);
-extern void ceph_check_delayed_caps(struct ceph_mds_client *mdsc);
+extern unsigned long ceph_check_delayed_caps(struct ceph_mds_client *mdsc);
extern void ceph_flush_dirty_caps(struct ceph_mds_client *mdsc);
extern int ceph_drop_caps_for_unlink(struct inode *inode);
extern int ceph_encode_inode_release(void **p, struct inode *inode,
From: Tejun Heo <[email protected]>
commit c3df5fb57fe8756d67fd56ed29da65cdfde839f9 upstream.
0fa294fb1985 ("cgroup: Replace cgroup_rstat_mutex with a spinlock") added
cgroup_rstat_flush_irqsafe() allowing flushing to happen from the irq
context. However, rstat paths use u64_stats_sync to synchronize access to
64bit stat counters on 32bit machines. u64_stats_sync is implemented using
seq_lock and trying to read from an irq context can lead to A-A deadlock if
the irq happens to interrupt the stat update.
Fix it by using the irqsafe variants - u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() - in the update paths. Note that none of
this matters on 64bit machines. All these are just for 32bit SMP setups.
Note that the interface was introduced way back, its first and currently
only use was recently added by 2d146aa3aa84 ("mm: memcontrol: switch to
rstat"). Stable tagging targets this commit.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Rik van Riel <[email protected]>
Fixes: 2d146aa3aa84 ("mm: memcontrol: switch to rstat")
Cc: [email protected] # v5.13+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-cgroup.c | 14 ++++++++------
kernel/cgroup/rstat.c | 19 +++++++++++--------
2 files changed, 19 insertions(+), 14 deletions(-)
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -774,6 +774,7 @@ static void blkcg_rstat_flush(struct cgr
struct blkcg_gq *parent = blkg->parent;
struct blkg_iostat_set *bisc = per_cpu_ptr(blkg->iostat_cpu, cpu);
struct blkg_iostat cur, delta;
+ unsigned long flags;
unsigned int seq;
/* fetch the current per-cpu values */
@@ -783,21 +784,21 @@ static void blkcg_rstat_flush(struct cgr
} while (u64_stats_fetch_retry(&bisc->sync, seq));
/* propagate percpu delta to global */
- u64_stats_update_begin(&blkg->iostat.sync);
+ flags = u64_stats_update_begin_irqsave(&blkg->iostat.sync);
blkg_iostat_set(&delta, &cur);
blkg_iostat_sub(&delta, &bisc->last);
blkg_iostat_add(&blkg->iostat.cur, &delta);
blkg_iostat_add(&bisc->last, &delta);
- u64_stats_update_end(&blkg->iostat.sync);
+ u64_stats_update_end_irqrestore(&blkg->iostat.sync, flags);
/* propagate global delta to parent (unless that's root) */
if (parent && parent->parent) {
- u64_stats_update_begin(&parent->iostat.sync);
+ flags = u64_stats_update_begin_irqsave(&parent->iostat.sync);
blkg_iostat_set(&delta, &blkg->iostat.cur);
blkg_iostat_sub(&delta, &blkg->iostat.last);
blkg_iostat_add(&parent->iostat.cur, &delta);
blkg_iostat_add(&blkg->iostat.last, &delta);
- u64_stats_update_end(&parent->iostat.sync);
+ u64_stats_update_end_irqrestore(&parent->iostat.sync, flags);
}
}
@@ -832,6 +833,7 @@ static void blkcg_fill_root_iostats(void
memset(&tmp, 0, sizeof(tmp));
for_each_possible_cpu(cpu) {
struct disk_stats *cpu_dkstats;
+ unsigned long flags;
cpu_dkstats = per_cpu_ptr(bdev->bd_stats, cpu);
tmp.ios[BLKG_IOSTAT_READ] +=
@@ -848,9 +850,9 @@ static void blkcg_fill_root_iostats(void
tmp.bytes[BLKG_IOSTAT_DISCARD] +=
cpu_dkstats->sectors[STAT_DISCARD] << 9;
- u64_stats_update_begin(&blkg->iostat.sync);
+ flags = u64_stats_update_begin_irqsave(&blkg->iostat.sync);
blkg_iostat_set(&blkg->iostat.cur, &tmp);
- u64_stats_update_end(&blkg->iostat.sync);
+ u64_stats_update_end_irqrestore(&blkg->iostat.sync, flags);
}
}
}
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -347,19 +347,20 @@ static void cgroup_base_stat_flush(struc
}
static struct cgroup_rstat_cpu *
-cgroup_base_stat_cputime_account_begin(struct cgroup *cgrp)
+cgroup_base_stat_cputime_account_begin(struct cgroup *cgrp, unsigned long *flags)
{
struct cgroup_rstat_cpu *rstatc;
rstatc = get_cpu_ptr(cgrp->rstat_cpu);
- u64_stats_update_begin(&rstatc->bsync);
+ *flags = u64_stats_update_begin_irqsave(&rstatc->bsync);
return rstatc;
}
static void cgroup_base_stat_cputime_account_end(struct cgroup *cgrp,
- struct cgroup_rstat_cpu *rstatc)
+ struct cgroup_rstat_cpu *rstatc,
+ unsigned long flags)
{
- u64_stats_update_end(&rstatc->bsync);
+ u64_stats_update_end_irqrestore(&rstatc->bsync, flags);
cgroup_rstat_updated(cgrp, smp_processor_id());
put_cpu_ptr(rstatc);
}
@@ -367,18 +368,20 @@ static void cgroup_base_stat_cputime_acc
void __cgroup_account_cputime(struct cgroup *cgrp, u64 delta_exec)
{
struct cgroup_rstat_cpu *rstatc;
+ unsigned long flags;
- rstatc = cgroup_base_stat_cputime_account_begin(cgrp);
+ rstatc = cgroup_base_stat_cputime_account_begin(cgrp, &flags);
rstatc->bstat.cputime.sum_exec_runtime += delta_exec;
- cgroup_base_stat_cputime_account_end(cgrp, rstatc);
+ cgroup_base_stat_cputime_account_end(cgrp, rstatc, flags);
}
void __cgroup_account_cputime_field(struct cgroup *cgrp,
enum cpu_usage_stat index, u64 delta_exec)
{
struct cgroup_rstat_cpu *rstatc;
+ unsigned long flags;
- rstatc = cgroup_base_stat_cputime_account_begin(cgrp);
+ rstatc = cgroup_base_stat_cputime_account_begin(cgrp, &flags);
switch (index) {
case CPUTIME_USER:
@@ -394,7 +397,7 @@ void __cgroup_account_cputime_field(stru
break;
}
- cgroup_base_stat_cputime_account_end(cgrp, rstatc);
+ cgroup_base_stat_cputime_account_end(cgrp, rstatc, flags);
}
/*
From: Tianjia Zhang <[email protected]>
[ Upstream commit 567c39047dbee341244fe3bf79fea24ee0897ff9 ]
Q1 and Q2 are numbers with *maximum* length of 384 bytes. If the
calculated length of Q1 and Q2 is less than 384 bytes, things will
go wrong.
E.g. if Q2 is 383 bytes, then
1. The bytes of q2 are copied to sigstruct->q2 in calc_q1q2().
2. The entire sigstruct->q2 is reversed, which results it being
256 * Q2, given that the last byte of sigstruct->q2 is added
to before the bytes given by calc_q1q2().
Either change in key or measurement can trigger the bug. E.g. an
unmeasured heap could cause a devastating change in Q1 or Q2.
Reverse exactly the bytes of Q1 and Q2 in calc_q1q2() before returning
to the caller.
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Link: https://lore.kernel.org/linux-sgx/[email protected]/
Signed-off-by: Tianjia Zhang <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/sgx/sigstruct.c | 41 +++++++++++++------------
1 file changed, 21 insertions(+), 20 deletions(-)
diff --git a/tools/testing/selftests/sgx/sigstruct.c b/tools/testing/selftests/sgx/sigstruct.c
index dee7a3d6c5a5..92bbc5a15c39 100644
--- a/tools/testing/selftests/sgx/sigstruct.c
+++ b/tools/testing/selftests/sgx/sigstruct.c
@@ -55,10 +55,27 @@ static bool alloc_q1q2_ctx(const uint8_t *s, const uint8_t *m,
return true;
}
+static void reverse_bytes(void *data, int length)
+{
+ int i = 0;
+ int j = length - 1;
+ uint8_t temp;
+ uint8_t *ptr = data;
+
+ while (i < j) {
+ temp = ptr[i];
+ ptr[i] = ptr[j];
+ ptr[j] = temp;
+ i++;
+ j--;
+ }
+}
+
static bool calc_q1q2(const uint8_t *s, const uint8_t *m, uint8_t *q1,
uint8_t *q2)
{
struct q1q2_ctx ctx;
+ int len;
if (!alloc_q1q2_ctx(s, m, &ctx)) {
fprintf(stderr, "Not enough memory for Q1Q2 calculation\n");
@@ -89,8 +106,10 @@ static bool calc_q1q2(const uint8_t *s, const uint8_t *m, uint8_t *q1,
goto out;
}
- BN_bn2bin(ctx.q1, q1);
- BN_bn2bin(ctx.q2, q2);
+ len = BN_bn2bin(ctx.q1, q1);
+ reverse_bytes(q1, len);
+ len = BN_bn2bin(ctx.q2, q2);
+ reverse_bytes(q2, len);
free_q1q2_ctx(&ctx);
return true;
@@ -152,22 +171,6 @@ static RSA *gen_sign_key(void)
return key;
}
-static void reverse_bytes(void *data, int length)
-{
- int i = 0;
- int j = length - 1;
- uint8_t temp;
- uint8_t *ptr = data;
-
- while (i < j) {
- temp = ptr[i];
- ptr[i] = ptr[j];
- ptr[j] = temp;
- i++;
- j--;
- }
-}
-
enum mrtags {
MRECREATE = 0x0045544145524345,
MREADD = 0x0000000044444145,
@@ -367,8 +370,6 @@ bool encl_measure(struct encl *encl)
/* BE -> LE */
reverse_bytes(sigstruct->signature, SGX_MODULUS_SIZE);
reverse_bytes(sigstruct->modulus, SGX_MODULUS_SIZE);
- reverse_bytes(sigstruct->q1, SGX_MODULUS_SIZE);
- reverse_bytes(sigstruct->q2, SGX_MODULUS_SIZE);
EVP_MD_CTX_destroy(ctx);
RSA_free(key);
--
2.30.2
From: Changbin Du <[email protected]>
commit 030d6dbf0c2e5fdf23ad29557f0c87a882993e26 upstream.
The RISC-V special option '-mno-relax' which to disable linker relaxations
is supported by GCC8+. For GCC7 and lower versions do not support this
option.
Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Changbin Du <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/kernel/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -11,7 +11,7 @@ endif
CFLAGS_syscall_table.o += $(call cc-option,-Wno-override-init,)
ifdef CONFIG_KEXEC
-AFLAGS_kexec_relocate.o := -mcmodel=medany -mno-relax
+AFLAGS_kexec_relocate.o := -mcmodel=medany $(call cc-option,-mno-relax)
endif
extra-y += head.o
From: Grygorii Strashko <[email protected]>
commit acc68b8d2a1196c4db806947606f162dbeed2274 upstream.
The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net:
ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet
size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW
packed drop issue when packets are sent from Host to the port with PVID and
un-tagging enabled. Unfortunately this breaks some other non-switch
specific use-cases, like:
- [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the
packet
- [2] Some industrial protocols, which expects min TX packet size 60Bytes
(excluding FCS).
Fix it by configuring min TX packet size depending on driver mode
- 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode
- 64Bytes (VLAN_ETH_ZLEN) for switch mode
and update it during driver mode change and annotate with
READ_ONCE()/WRITE_ONCE() as it can be read by napi while writing.
[1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/
[2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669
Cc: [email protected]
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Reported-by: Ben Hutchings <[email protected]>
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ti/cpsw_new.c | 7 +++++--
drivers/net/ethernet/ti/cpsw_priv.h | 4 +++-
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -920,7 +920,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(s
struct cpdma_chan *txch;
int ret, q_idx;
- if (skb_padto(skb, CPSW_MIN_PACKET_SIZE)) {
+ if (skb_put_padto(skb, READ_ONCE(priv->tx_packet_min))) {
cpsw_err(priv, tx_err, "packet pad failed\n");
ndev->stats.tx_dropped++;
return NET_XMIT_DROP;
@@ -1100,7 +1100,7 @@ static int cpsw_ndo_xdp_xmit(struct net_
for (i = 0; i < n; i++) {
xdpf = frames[i];
- if (xdpf->len < CPSW_MIN_PACKET_SIZE)
+ if (xdpf->len < READ_ONCE(priv->tx_packet_min))
break;
if (cpsw_xdp_tx_frame(priv, xdpf, NULL, priv->emac_port))
@@ -1389,6 +1389,7 @@ static int cpsw_create_ports(struct cpsw
priv->dev = dev;
priv->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG);
priv->emac_port = i + 1;
+ priv->tx_packet_min = CPSW_MIN_PACKET_SIZE;
if (is_valid_ether_addr(slave_data->mac_addr)) {
ether_addr_copy(priv->mac_addr, slave_data->mac_addr);
@@ -1686,6 +1687,7 @@ static int cpsw_dl_switch_mode_set(struc
priv = netdev_priv(sl_ndev);
slave->port_vlan = vlan;
+ WRITE_ONCE(priv->tx_packet_min, CPSW_MIN_PACKET_SIZE_VLAN);
if (netif_running(sl_ndev))
cpsw_port_add_switch_def_ale_entries(priv,
slave);
@@ -1714,6 +1716,7 @@ static int cpsw_dl_switch_mode_set(struc
priv = netdev_priv(slave->ndev);
slave->port_vlan = slave->data->dual_emac_res_vlan;
+ WRITE_ONCE(priv->tx_packet_min, CPSW_MIN_PACKET_SIZE);
cpsw_port_add_dual_emac_def_ale_entries(priv, slave);
}
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -89,7 +89,8 @@ do { \
#define CPSW_POLL_WEIGHT 64
#define CPSW_RX_VLAN_ENCAP_HDR_SIZE 4
-#define CPSW_MIN_PACKET_SIZE (VLAN_ETH_ZLEN)
+#define CPSW_MIN_PACKET_SIZE_VLAN (VLAN_ETH_ZLEN)
+#define CPSW_MIN_PACKET_SIZE (ETH_ZLEN)
#define CPSW_MAX_PACKET_SIZE (VLAN_ETH_FRAME_LEN +\
ETH_FCS_LEN +\
CPSW_RX_VLAN_ENCAP_HDR_SIZE)
@@ -380,6 +381,7 @@ struct cpsw_priv {
u32 emac_port;
struct cpsw_common *cpsw;
int offload_fwd_mark;
+ u32 tx_packet_min;
};
#define ndev_to_cpsw(ndev) (((struct cpsw_priv *)netdev_priv(ndev))->cpsw)
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 64324bac750b84ca54711fb7d332132fcdb87293 ]
The driver has no support for left-justified protocol so it should
not have been allowing this to be passed to cs42l42_set_dai_fmt().
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 3956912e23ac..0d31c84b0445 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -778,7 +778,6 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
- case SND_SOC_DAIFMT_LEFT_J:
break;
default:
return -EINVAL;
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 8b353bbeae20e2214c9d9d88bcb2fda4ba145d83 ]
The driver was defining two ALSA controls that both change the same
register field for the wind noise filter corner frequency. The filter
response has two corners, at different frequencies, and the duplicate
controls most likely were an attempt to be able to set the value using
either of the frequencies.
However, having two controls changing the same field can be problematic
and it is unnecessary. Both frequencies are related to each other so
setting one implies exactly what the other would be.
Removing a control affects user-side code, but there is currently no
known use of the removed control so it would be best to remove it now
before it becomes a problem.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index c7fb33a89224..22d8c8d03308 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -424,15 +424,6 @@ static SOC_ENUM_SINGLE_DECL(cs42l42_wnf3_freq_enum, CS42L42_ADC_WNF_HPF_CTL,
CS42L42_ADC_WNF_CF_SHIFT,
cs42l42_wnf3_freq_text);
-static const char * const cs42l42_wnf05_freq_text[] = {
- "280Hz", "315Hz", "350Hz", "385Hz",
- "420Hz", "455Hz", "490Hz", "525Hz"
-};
-
-static SOC_ENUM_SINGLE_DECL(cs42l42_wnf05_freq_enum, CS42L42_ADC_WNF_HPF_CTL,
- CS42L42_ADC_WNF_CF_SHIFT,
- cs42l42_wnf05_freq_text);
-
static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
/* ADC Volume and Filter Controls */
SOC_SINGLE("ADC Notch Switch", CS42L42_ADC_CTL,
@@ -450,7 +441,6 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
CS42L42_ADC_HPF_EN_SHIFT, true, false),
SOC_ENUM("HPF Corner Freq", cs42l42_hpf_freq_enum),
SOC_ENUM("WNF 3dB Freq", cs42l42_wnf3_freq_enum),
- SOC_ENUM("WNF 05dB Freq", cs42l42_wnf05_freq_enum),
/* DAC Volume and Filter Controls */
SOC_SINGLE("DACA Invert Switch", CS42L42_DAC_CTL1,
--
2.30.2
From: Anirudh Venkataramanan <[email protected]>
[ Upstream commit 50ac7479846053ca8054be833c1594e64de496bb ]
The userspace utility "driverctl" can be used to change/override the
system's default driver choices. This is useful in some situations
(buggy driver, old driver missing a device ID, trying a workaround,
etc.) where the user needs to load a different driver.
However, this is also prone to user error, where a driver is mapped
to a device it's not designed to drive. For example, if the ice driver
is mapped to driver iavf devices, the ice driver crashes.
Add a check to return an error if the ice driver is being used to
probe a virtual function.
Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Gurucharan G <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 0eb2307325d3..6a72a3b93037 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4014,6 +4014,11 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
struct ice_hw *hw;
int i, err;
+ if (pdev->is_virtfn) {
+ dev_err(dev, "can't probe a virtual function\n");
+ return -EINVAL;
+ }
+
/* this driver uses devres, see
* Documentation/driver-api/driver-model/devres.rst
*/
--
2.30.2
From: Roi Dayan <[email protected]>
[ Upstream commit beb7f2de5728b0bd2140a652fa51f6ad85d159f7 ]
Without this there is a warning if source files include psample.h
before skbuff.h or doesn't include it at all.
Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Signed-off-by: Roi Dayan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/psample.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/net/psample.h b/include/net/psample.h
index e328c5127757..0509d2d6be67 100644
--- a/include/net/psample.h
+++ b/include/net/psample.h
@@ -31,6 +31,8 @@ struct psample_group *psample_group_get(struct net *net, u32 group_num);
void psample_group_take(struct psample_group *group);
void psample_group_put(struct psample_group *group);
+struct sk_buff;
+
#if IS_ENABLED(CONFIG_PSAMPLE)
void psample_sample_packet(struct psample_group *group, struct sk_buff *skb,
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit e5ada3f6787a4d6234adc6f2f3ae35c6d5b71ba0 ]
I2S always has two LRCLK phases and both CH1 and CH2 of the RX
must be enabled (corresponding to the low and high phases of LRCLK.)
The selection of the valid data channels is done by setting the DAC
CHA_SEL and CHB_SEL. CHA_SEL is always the first (left) channel,
CHB_SEL depends on the number of active channels.
Previously for mono ASP CH2 was not enabled, the result was playing
mono data would not produce any audio output.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 621d65f3b868 ("ASoC: cs42l42: Provide finer control on playback path")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 15 +++++++++++++--
sound/soc/codecs/cs42l42.h | 2 ++
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 0c8cdfe78d96..e0a524f8e16c 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -459,8 +459,8 @@ static const struct snd_soc_dapm_widget cs42l42_dapm_widgets[] = {
SND_SOC_DAPM_OUTPUT("HP"),
SND_SOC_DAPM_DAC("DAC", NULL, CS42L42_PWR_CTL1, CS42L42_HP_PDN_SHIFT, 1),
SND_SOC_DAPM_MIXER("MIXER", CS42L42_PWR_CTL1, CS42L42_MIXER_PDN_SHIFT, 1, NULL, 0),
- SND_SOC_DAPM_AIF_IN("SDIN1", NULL, 0, CS42L42_ASP_RX_DAI0_EN, CS42L42_ASP_RX0_CH1_SHIFT, 0),
- SND_SOC_DAPM_AIF_IN("SDIN2", NULL, 1, CS42L42_ASP_RX_DAI0_EN, CS42L42_ASP_RX0_CH2_SHIFT, 0),
+ SND_SOC_DAPM_AIF_IN("SDIN1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SDIN2", NULL, 1, SND_SOC_NOPM, 0, 0),
/* Playback Requirements */
SND_SOC_DAPM_SUPPLY("ASP DAI0", CS42L42_PWR_CTL1, CS42L42_ASP_DAI_PDN_SHIFT, 1, NULL, 0),
@@ -837,6 +837,17 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH2_AP_RES,
CS42L42_ASP_RX_CH_AP_MASK |
CS42L42_ASP_RX_CH_RES_MASK, val);
+
+ /* Channel B comes from the last active channel */
+ snd_soc_component_update_bits(component, CS42L42_SP_RX_CH_SEL,
+ CS42L42_SP_RX_CHB_SEL_MASK,
+ (channels - 1) << CS42L42_SP_RX_CHB_SEL_SHIFT);
+
+ /* Both LRCLK slots must be enabled */
+ snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_EN,
+ CS42L42_ASP_RX0_CH_EN_MASK,
+ BIT(CS42L42_ASP_RX0_CH1_SHIFT) |
+ BIT(CS42L42_ASP_RX0_CH2_SHIFT));
break;
default:
break;
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 38fd91a168ae..10cf2e4c8ead 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -653,6 +653,8 @@
/* Page 0x25 Audio Port Registers */
#define CS42L42_SP_RX_CH_SEL (CS42L42_PAGE_25 + 0x01)
+#define CS42L42_SP_RX_CHB_SEL_SHIFT 2
+#define CS42L42_SP_RX_CHB_SEL_MASK (3 << CS42L42_SP_RX_CHB_SEL_SHIFT)
#define CS42L42_SP_RX_ISOC_CTL (CS42L42_PAGE_25 + 0x02)
#define CS42L42_SP_RX_RSYNC_SHIFT 6
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit 9d7b132e62e41b7d49bf157aeaf9147c27492e0f ]
The gpiod_lookup_table.table passed to gpiod_add_lookup_table() must
be terminated with an empty entry, add this.
Note we have likely been getting away with this not being present because
the GPIO lookup code first matches on the dev_id, causing most lookups to
skip checking the table and the lookups which do check the table will
find a matching entry before reaching the end. With that said, terminating
these tables properly still is obviously the correct thing to do.
Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/pcengines-apuv2.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c
index c37349f97bb8..d063d91db9bc 100644
--- a/drivers/platform/x86/pcengines-apuv2.c
+++ b/drivers/platform/x86/pcengines-apuv2.c
@@ -94,6 +94,7 @@ static struct gpiod_lookup_table gpios_led_table = {
NULL, 1, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3,
NULL, 2, GPIO_ACTIVE_LOW),
+ {} /* Terminating entry */
}
};
@@ -123,6 +124,7 @@ static struct gpiod_lookup_table gpios_key_table = {
.table = {
GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_MODESW,
NULL, 0, GPIO_ACTIVE_LOW),
+ {} /* Terminating entry */
}
};
--
2.30.2
From: Hangbin Liu <[email protected]>
[ Upstream commit d09c548dbf3b31cb07bba562e0f452edfa01efe3 ]
When mirror/redirect a skb to a different port, the ct info should be reset
for reclassification. Or the pkts will match unexpected rules. For example,
with following topology and commands:
-----------
|
veth0 -+-------
|
veth1 -+-------
|
------------
tc qdisc add dev veth0 clsact
# The same with "action mirred egress mirror dev veth1" or "action mirred ingress redirect dev veth1"
tc filter add dev veth0 egress chain 1 protocol ip flower ct_state +trk action mirred ingress mirror dev veth1
tc filter add dev veth0 egress chain 0 protocol ip flower ct_state -inv action ct commit action goto chain 1
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress chain 0 protocol ip flower ct_state +trk action drop
ping <remove ip via veth0> &
tc -s filter show dev veth1 ingress
With command 'tc -s filter show', we can find the pkts were dropped on
veth1.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Roi Dayan <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/act_mirred.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index 7153c67f641e..2ef4cd2c848b 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -273,6 +273,9 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
goto out;
}
+ /* All mirred/redirected skbs should clear previous ct info */
+ nf_reset_ct(skb2);
+
want_ingress = tcf_mirred_act_wants_ingress(m_eaction);
expects_nh = want_ingress || !m_mac_header_xmit;
--
2.30.2
From: Guillaume Nault <[email protected]>
[ Upstream commit 143a8526ab5fd4f8a0c4fe2a9cb28c181dc5a95f ]
Data beyond the UDP header might not be part of the skb's linear data.
Use skb_copy_bits() instead of direct access to skb->data+X, so that
we read the correct bytes even on a fragmented skb.
Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.")
Signed-off-by: Guillaume Nault <[email protected]>
Link: https://lore.kernel.org/r/7741c46545c6ef02e70c80a9b32814b22d9616b3.1628264975.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bareudp.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c
index edfad93e7b68..22e26458a86e 100644
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -71,12 +71,18 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
family = AF_INET6;
if (bareudp->ethertype == htons(ETH_P_IP)) {
- struct iphdr *iphdr;
+ __u8 ipversion;
- iphdr = (struct iphdr *)(skb->data + BAREUDP_BASE_HLEN);
- if (iphdr->version == 4) {
- proto = bareudp->ethertype;
- } else if (bareudp->multi_proto_mode && (iphdr->version == 6)) {
+ if (skb_copy_bits(skb, BAREUDP_BASE_HLEN, &ipversion,
+ sizeof(ipversion))) {
+ bareudp->dev->stats.rx_dropped++;
+ goto drop;
+ }
+ ipversion >>= 4;
+
+ if (ipversion == 4) {
+ proto = htons(ETH_P_IP);
+ } else if (ipversion == 6 && bareudp->multi_proto_mode) {
proto = htons(ETH_P_IPV6);
} else {
bareudp->dev->stats.rx_dropped++;
--
2.30.2
From: Anirudh Venkataramanan <[email protected]>
[ Upstream commit c503e63200c679e362afca7aca9d3dc63a0f45ed ]
When VFs are setup and torn down in quick succession, it is possible
that a VF is torn down by the PF while the VF's virtchnl requests are
still in the PF's mailbox ring. Processing the VF's virtchnl request
when the VF itself doesn't exist results in undefined behavior. Fix
this by adding a check to stop processing virtchnl requests when VF
teardown is in progress.
Fixes: ddf30f7ff840 ("ice: Add handler to configure SR-IOV")
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice.h | 1 +
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 2924c67567b8..13ffa3f6a521 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -226,6 +226,7 @@ enum ice_pf_state {
ICE_VFLR_EVENT_PENDING,
ICE_FLTR_OVERFLOW_PROMISC,
ICE_VF_DIS,
+ ICE_VF_DEINIT_IN_PROGRESS,
ICE_CFG_BUSY,
ICE_SERVICE_SCHED,
ICE_SERVICE_DIS,
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 97a46c616aca..671902d9fc35 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -615,6 +615,8 @@ void ice_free_vfs(struct ice_pf *pf)
struct ice_hw *hw = &pf->hw;
unsigned int tmp, i;
+ set_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state);
+
if (!pf->vf)
return;
@@ -680,6 +682,7 @@ void ice_free_vfs(struct ice_pf *pf)
i);
clear_bit(ICE_VF_DIS, pf->state);
+ clear_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state);
clear_bit(ICE_FLAG_SRIOV_ENA, pf->flags);
}
@@ -4292,6 +4295,10 @@ void ice_vc_process_vf_msg(struct ice_pf *pf, struct ice_rq_event_info *event)
struct device *dev;
int err = 0;
+ /* if de-init is underway, don't process messages from VF */
+ if (test_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state))
+ return;
+
dev = ice_pf_to_dev(pf);
if (ice_validate_vf_id(pf, vf_id)) {
err = -EINVAL;
--
2.30.2
From: Nathan Chancellor <[email protected]>
commit 848378812e40152abe9b9baf58ce2004f76fb988 upstream.
A recent change in LLVM causes module_{c,d}tor sections to appear when
CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings
because these are not handled anywhere:
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor'
Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN
flag, so it is in a separate section even with -fno-function-sections
(default)".
Place them in the TEXT_TEXT section so that these technologies continue
to work with the newer compiler versions. All of the KASAN and KCSAN
KUnit tests continue to pass after this change.
Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/1432
Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Fangrui Song <[email protected]>
Acked-by: Marco Elver <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/asm-generic/vmlinux.lds.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -586,6 +586,7 @@
NOINSTR_TEXT \
*(.text..refcount) \
*(.ref.text) \
+ *(.text.asan.* .text.tsan.*) \
TEXT_CFI_JT \
MEM_KEEP(init.text*) \
MEM_KEEP(exit.text*) \
From: Pali Rohár <[email protected]>
[ Upstream commit 2459dcb96bcba94c08d6861f8a050185ff301672 ]
IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be
larger than length of string which contains.
Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME
was not specified at all or userspace passed empty nul-term string.
It is expected that if userspace does not specify ifname for new ppp netdev
then kernel generates one in format "ppp<id>" where id matches to the ppp
unit id which can be later obtained by PPPIOCGUNIT ioctl.
And it works in this way if IFLA_IFNAME is not specified at all. But it
does not work when IFLA_IFNAME is specified with empty string.
So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function
and correctly generates ifname based on ppp unit identifier if userspace
did not provided preferred ifname.
Without this patch when IFLA_IFNAME was specified with empty string then
kernel created a new ppp interface in format "ppp<id>" but id did not
match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some
number generated by __rtnl_newlink() function.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: bb8082f69138 ("ppp: build ifname using unit identifier for rtnl based devices")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index b9dd47bd597f..7a099c37527f 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -1317,7 +1317,7 @@ static int ppp_nl_newlink(struct net *src_net, struct net_device *dev,
* the PPP unit identifer as suffix (i.e. ppp<unit_id>). This allows
* userspace to infer the device name using to the PPPIOCGUNIT ioctl.
*/
- if (!tb[IFLA_IFNAME])
+ if (!tb[IFLA_IFNAME] || !nla_len(tb[IFLA_IFNAME]) || !*(char *)nla_data(tb[IFLA_IFNAME]))
conf.ifname_is_set = false;
err = ppp_dev_configure(src_net, dev, &conf);
--
2.30.2
From: Takashi Iwai <[email protected]>
commit 42bc62c9f1d3d4880bdc27acb5ab4784209bb0b0 upstream.
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/xilinx/xlnx_formatter_pcm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -452,8 +452,8 @@ static int xlnx_formatter_pcm_hw_params(
stream_data->buffer_size = size;
- low = lower_32_bits(substream->dma_buffer.addr);
- high = upper_32_bits(substream->dma_buffer.addr);
+ low = lower_32_bits(runtime->dma_addr);
+ high = upper_32_bits(runtime->dma_addr);
writel(low, stream_data->mmio + XLNX_AUD_BUFF_ADDR_LSB);
writel(high, stream_data->mmio + XLNX_AUD_BUFF_ADDR_MSB);
From: Antti Keränen <[email protected]>
commit 7e77ef8b8d600cf8448a2bbd32f682c28884551f upstream.
Set reset pin direction to output as the reset pin needs to be an active
low output pin.
Co-developed-by: Hannu Hartikainen <[email protected]>
Signed-off-by: Hannu Hartikainen <[email protected]>
Signed-off-by: Antti Keränen <[email protected]>
Reviewed-by: Nuno Sá <[email protected]>
Fixes: ecb010d44108 ("iio: imu: adis: Refactor adis_initial_startup")
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/imu/adis.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -415,12 +415,11 @@ int __adis_initial_startup(struct adis *
int ret;
/* check if the device has rst pin low */
- gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_ASIS);
+ gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
- gpiod_set_value_cansleep(gpio, 1);
msleep(10);
/* bring device out of reset */
gpiod_set_value_cansleep(gpio, 0);
From: Vineet Gupta <[email protected]>
commit 3a715e80400f452b247caa55344f4f60250ffbcf upstream.
FPU_STATUS register contains FP exception flags bits which are updated
by core as side-effect of FP instructions but can also be manually
wiggled such as by glibc C99 functions fe{raise,clear,test}except() etc.
To effect the update, the programming model requires OR'ing FWE
bit (31). This bit is write-only and RAZ, meaning it is effectively
auto-cleared after write and thus needs to be set everytime: which
is how glibc implements this.
However there's another usecase of FPU_STATUS update, at the time of
Linux task switch when incoming task value needs to be programmed into
the register. This was added as part of f45ba2bd6da0dc ("ARCv2:
fpu: preserve userspace fpu state") which missed OR'ing FWE bit,
meaning the new value is effectively not being written at all.
This patch remedies that.
Interestingly, this snafu was not caught in interm glibc testing as the
race window which relies on a specific exception bit to be set/clear is
really small specially when it nvolves context switch.
Fortunately this was caught by glibc's math/test-fenv-tls test which
repeatedly set/clear exception flags in a big loop, concurrently in main
program and also in a thread.
Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/54
Fixes: f45ba2bd6da0dc ("ARCv2: fpu: preserve userspace fpu state")
Cc: [email protected] #5.6+
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/fpu.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/arc/kernel/fpu.c
+++ b/arch/arc/kernel/fpu.c
@@ -57,23 +57,26 @@ void fpu_save_restore(struct task_struct
void fpu_init_task(struct pt_regs *regs)
{
+ const unsigned int fwe = 0x80000000;
+
/* default rounding mode */
write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
- /* set "Write enable" to allow explicit write to exception flags */
- write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+ /* Initialize to zero: setting requires FWE be set */
+ write_aux_reg(ARC_REG_FPU_STATUS, fwe);
}
void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
{
struct arc_fpu *save = &prev->thread.fpu;
struct arc_fpu *restore = &next->thread.fpu;
+ const unsigned int fwe = 0x80000000;
save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
save->status = read_aux_reg(ARC_REG_FPU_STATUS);
write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
- write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+ write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
}
#endif
From: Ankit Nautiyal <[email protected]>
commit abd9d66a055722393d33685214c08386694871d7 upstream.
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.
This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffef2 ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <[email protected]> (v1)
Cc: Ville Syrjälä <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v3.13+
Signed-off-by: Ankit Nautiyal <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Uma Shankar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 70418a68713c13da3f36c388087d0220b456a430)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_display.c | 34 +++++++++++++++++++--------
drivers/gpu/drm/i915/i915_reg.h | 16 ++++++++----
2 files changed, 35 insertions(+), 15 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5424,16 +5424,18 @@ static void bdw_set_pipemisc(const struc
switch (crtc_state->pipe_bpp) {
case 18:
- val |= PIPEMISC_DITHER_6_BPC;
+ val |= PIPEMISC_6_BPC;
break;
case 24:
- val |= PIPEMISC_DITHER_8_BPC;
+ val |= PIPEMISC_8_BPC;
break;
case 30:
- val |= PIPEMISC_DITHER_10_BPC;
+ val |= PIPEMISC_10_BPC;
break;
case 36:
- val |= PIPEMISC_DITHER_12_BPC;
+ /* Port output 12BPC defined for ADLP+ */
+ if (DISPLAY_VER(dev_priv) > 12)
+ val |= PIPEMISC_12_BPC_ADLP;
break;
default:
MISSING_CASE(crtc_state->pipe_bpp);
@@ -5469,15 +5471,27 @@ int bdw_get_pipemisc_bpp(struct intel_cr
tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe));
- switch (tmp & PIPEMISC_DITHER_BPC_MASK) {
- case PIPEMISC_DITHER_6_BPC:
+ switch (tmp & PIPEMISC_BPC_MASK) {
+ case PIPEMISC_6_BPC:
return 18;
- case PIPEMISC_DITHER_8_BPC:
+ case PIPEMISC_8_BPC:
return 24;
- case PIPEMISC_DITHER_10_BPC:
+ case PIPEMISC_10_BPC:
return 30;
- case PIPEMISC_DITHER_12_BPC:
- return 36;
+ /*
+ * PORT OUTPUT 12 BPC defined for ADLP+.
+ *
+ * TODO:
+ * For previous platforms with DSI interface, bits 5:7
+ * are used for storing pipe_bpp irrespective of dithering.
+ * Since the value of 12 BPC is not defined for these bits
+ * on older platforms, need to find a workaround for 12 BPC
+ * MIPI DSI HW readout.
+ */
+ case PIPEMISC_12_BPC_ADLP:
+ if (DISPLAY_VER(dev_priv) > 12)
+ return 36;
+ fallthrough;
default:
MISSING_CASE(tmp);
return 0;
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6134,11 +6134,17 @@ enum {
#define PIPEMISC_HDR_MODE_PRECISION (1 << 23) /* icl+ */
#define PIPEMISC_OUTPUT_COLORSPACE_YUV (1 << 11)
#define PIPEMISC_PIXEL_ROUNDING_TRUNC REG_BIT(8) /* tgl+ */
-#define PIPEMISC_DITHER_BPC_MASK (7 << 5)
-#define PIPEMISC_DITHER_8_BPC (0 << 5)
-#define PIPEMISC_DITHER_10_BPC (1 << 5)
-#define PIPEMISC_DITHER_6_BPC (2 << 5)
-#define PIPEMISC_DITHER_12_BPC (3 << 5)
+/*
+ * For Display < 13, Bits 5-7 of PIPE MISC represent DITHER BPC with
+ * valid values of: 6, 8, 10 BPC.
+ * ADLP+, the bits 5-7 represent PORT OUTPUT BPC with valid values of:
+ * 6, 8, 10, 12 BPC.
+ */
+#define PIPEMISC_BPC_MASK (7 << 5)
+#define PIPEMISC_8_BPC (0 << 5)
+#define PIPEMISC_10_BPC (1 << 5)
+#define PIPEMISC_6_BPC (2 << 5)
+#define PIPEMISC_12_BPC_ADLP (4 << 5) /* adlp+ */
#define PIPEMISC_DITHER_ENABLE (1 << 4)
#define PIPEMISC_DITHER_TYPE_MASK (3 << 2)
#define PIPEMISC_DITHER_TYPE_SP (0 << 2)
From: Hao Xu <[email protected]>
[ Upstream commit 47cae0c71f7a126903f930191e6e9f103674aca1 ]
There may be cases like:
A B
spin_lock(wqe->lock)
nr_workers is 0
nr_workers++
spin_unlock(wqe->lock)
spin_lock(wqe->lock)
nr_wokers is 1
nr_workers++
spin_unlock(wqe->lock)
create_io_worker()
acct->worker is 1
create_io_worker()
acct->worker is 1
There should be one worker marked IO_WORKER_F_FIXED, but no one is.
Fix this by introduce a new agrument for create_io_worker() to indicate
if it is the first worker.
Fixes: 3d4e4face9c1 ("io-wq: fix no lock protection of acct->nr_worker")
Signed-off-by: Hao Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io-wq.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/fs/io-wq.c b/fs/io-wq.c
index 2c8a9a394884..91b0d1fb90eb 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -130,7 +130,7 @@ struct io_cb_cancel_data {
bool cancel_all;
};
-static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index);
+static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index, bool first);
static void io_wqe_dec_running(struct io_worker *worker);
static bool io_worker_get(struct io_worker *worker)
@@ -249,18 +249,20 @@ static void io_wqe_wake_worker(struct io_wqe *wqe, struct io_wqe_acct *acct)
rcu_read_unlock();
if (!ret) {
- bool do_create = false;
+ bool do_create = false, first = false;
raw_spin_lock_irq(&wqe->lock);
if (acct->nr_workers < acct->max_workers) {
atomic_inc(&acct->nr_running);
atomic_inc(&wqe->wq->worker_refs);
+ if (!acct->nr_workers)
+ first = true;
acct->nr_workers++;
do_create = true;
}
raw_spin_unlock_irq(&wqe->lock);
if (do_create)
- create_io_worker(wqe->wq, wqe, acct->index);
+ create_io_worker(wqe->wq, wqe, acct->index, first);
}
}
@@ -283,7 +285,7 @@ static void create_worker_cb(struct callback_head *cb)
struct io_wq *wq;
struct io_wqe *wqe;
struct io_wqe_acct *acct;
- bool do_create = false;
+ bool do_create = false, first = false;
cwd = container_of(cb, struct create_worker_data, work);
wqe = cwd->wqe;
@@ -291,12 +293,14 @@ static void create_worker_cb(struct callback_head *cb)
acct = &wqe->acct[cwd->index];
raw_spin_lock_irq(&wqe->lock);
if (acct->nr_workers < acct->max_workers) {
+ if (!acct->nr_workers)
+ first = true;
acct->nr_workers++;
do_create = true;
}
raw_spin_unlock_irq(&wqe->lock);
if (do_create) {
- create_io_worker(wq, cwd->wqe, cwd->index);
+ create_io_worker(wq, wqe, cwd->index, first);
} else {
atomic_dec(&acct->nr_running);
io_worker_ref_put(wq);
@@ -642,7 +646,7 @@ void io_wq_worker_sleeping(struct task_struct *tsk)
raw_spin_unlock_irq(&worker->wqe->lock);
}
-static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index)
+static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index, bool first)
{
struct io_wqe_acct *acct = &wqe->acct[index];
struct io_worker *worker;
@@ -683,7 +687,7 @@ fail:
worker->flags |= IO_WORKER_F_FREE;
if (index == IO_WQ_ACCT_BOUND)
worker->flags |= IO_WORKER_F_BOUND;
- if ((acct->nr_workers == 1) && (worker->flags & IO_WORKER_F_BOUND))
+ if (first && (worker->flags & IO_WORKER_F_BOUND))
worker->flags |= IO_WORKER_F_FIXED;
raw_spin_unlock_irq(&wqe->lock);
wake_up_new_task(tsk);
--
2.30.2
From: Dan Williams <[email protected]>
commit d9cee9f85b22fab88d2b76d2e92b18e3d0e6aa8c upstream.
There are a few scenarios where init_active_labels() can return without
registering deactivate_labels() to run when the region is disabled. In
particular label error injection creates scenarios where a DIMM is
disabled, but labels on other DIMMs in the region become activated.
Arrange for init_active_labels() to always register deactivate_labels().
Reported-by: Krzysztof Kensicki <[email protected]>
Cc: <[email protected]>
Fixes: bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation.")
Reviewed-by: Jeff Moyer <[email protected]>
Link: https://lore.kernel.org/r/162766356450.3223041.1183118139023841447.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvdimm/namespace_devs.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -2527,7 +2527,7 @@ static void deactivate_labels(void *regi
static int init_active_labels(struct nd_region *nd_region)
{
- int i;
+ int i, rc = 0;
for (i = 0; i < nd_region->ndr_mappings; i++) {
struct nd_mapping *nd_mapping = &nd_region->mapping[i];
@@ -2546,13 +2546,14 @@ static int init_active_labels(struct nd_
else if (test_bit(NDD_LABELING, &nvdimm->flags))
/* fail, labels needed to disambiguate dpa */;
else
- return 0;
+ continue;
dev_err(&nd_region->dev, "%s: is %s, failing probe\n",
dev_name(&nd_mapping->nvdimm->dev),
test_bit(NDD_LOCKED, &nvdimm->flags)
? "locked" : "disabled");
- return -ENXIO;
+ rc = -ENXIO;
+ goto out;
}
nd_mapping->ndd = ndd;
atomic_inc(&nvdimm->busy);
@@ -2586,13 +2587,17 @@ static int init_active_labels(struct nd_
break;
}
- if (i < nd_region->ndr_mappings) {
+ if (i < nd_region->ndr_mappings)
+ rc = -ENOMEM;
+
+out:
+ if (rc) {
deactivate_labels(nd_region);
- return -ENOMEM;
+ return rc;
}
return devm_add_action_or_reset(&nd_region->dev, deactivate_labels,
- nd_region);
+ nd_region);
}
int nd_region_register_namespaces(struct nd_region *nd_region, int *err)
From: Dan Williams <[email protected]>
commit b93dfa6bda4d4e88e5386490f2b277a26958f9d3 upstream.
Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as
a special case and not match Region Mapping Structures that use 0 to
indicate that they are not mapped. Without this fix some platform BIOS
descriptions of "virtual disk" ranges do not result in the pmem driver
attaching to the range.
Details:
In addition to typical persistent memory ranges, the ACPI NFIT may also
convey "virtual" ranges. These ranges are indicated by a UUID in the SPA
Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD,
UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The
critical difference between virtual ranges and UUID_PERSISTENT_MEMORY,
is that virtual do not support associations with Region Mapping
Structures. For this reason the "index" value of virtual SPA Range
Structures is allowed to be 0. If a platform BIOS decides to represent
NVDIMMs with disconnected "Region Mapping Structures" (range-index ==
0), the kernel may falsely associate them with standalone ranges where
the "SPA Range Structure Index" is also zero. When this happens the
driver may falsely require labels where "virtual disks" are expected to
be label-less. I.e. "label-less" is where the namespace-range ==
region-range and the pmem driver attaches with no user action to create
a namespace.
Cc: Jacek Zloch <[email protected]>
Cc: Lukasz Sobieraj <[email protected]>
Cc: "Lee, Chun-Yi" <[email protected]>
Cc: <[email protected]>
Fixes: c2f32acdf848 ("acpi, nfit: treat virtual ramdisk SPA as pmem region")
Reported-by: Krzysztof Rusocki <[email protected]>
Reported-by: Damian Bassa <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/nfit/core.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -3021,6 +3021,9 @@ static int acpi_nfit_register_region(str
struct acpi_nfit_memory_map *memdev = nfit_memdev->memdev;
struct nd_mapping_desc *mapping;
+ /* range index 0 == unmapped in SPA or invalid-SPA */
+ if (memdev->range_index == 0 || spa->range_index == 0)
+ continue;
if (memdev->range_index != spa->range_index)
continue;
if (count >= ND_MAX_MAPPINGS) {
From: Damien Le Moal <[email protected]>
commit 31697ef7f3f45293bba3da87bcc710953e97fc3e upstream.
In k210_fpioa_probe(), add missing calls to clk_disable_unprepare() in
case of error after cenabling the clk and pclk clocks. Also add missing
error handling when enabling pclk.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Cc: <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinctrl-k210.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/pinctrl/pinctrl-k210.c
+++ b/drivers/pinctrl/pinctrl-k210.c
@@ -950,23 +950,37 @@ static int k210_fpioa_probe(struct platf
return ret;
pdata->pclk = devm_clk_get_optional(dev, "pclk");
- if (!IS_ERR(pdata->pclk))
- clk_prepare_enable(pdata->pclk);
+ if (!IS_ERR(pdata->pclk)) {
+ ret = clk_prepare_enable(pdata->pclk);
+ if (ret)
+ goto disable_clk;
+ }
pdata->sysctl_map =
syscon_regmap_lookup_by_phandle_args(np,
"canaan,k210-sysctl-power",
1, &pdata->power_offset);
- if (IS_ERR(pdata->sysctl_map))
- return PTR_ERR(pdata->sysctl_map);
+ if (IS_ERR(pdata->sysctl_map)) {
+ ret = PTR_ERR(pdata->sysctl_map);
+ goto disable_pclk;
+ }
k210_fpioa_init_ties(pdata);
pdata->pctl = pinctrl_register(&k210_pinctrl_desc, dev, (void *)pdata);
- if (IS_ERR(pdata->pctl))
- return PTR_ERR(pdata->pctl);
+ if (IS_ERR(pdata->pctl)) {
+ ret = PTR_ERR(pdata->pctl);
+ goto disable_pclk;
+ }
return 0;
+
+disable_pclk:
+ clk_disable_unprepare(pdata->pclk);
+disable_clk:
+ clk_disable_unprepare(pdata->clk);
+
+ return ret;
}
static const struct of_device_id k210_fpioa_dt_ids[] = {
From: Colin Ian King <[email protected]>
commit 5afc1540f13804a31bb704b763308e17688369c5 upstream.
Currently the for-loop that scans for the optimial adc_period iterates
through all the possible adc_period levels because the exit logic in
the loop is inverted. I believe the comparison should be swapped and
the continue replaced with a break to exit the loop at the correct
point.
Addresses-Coverity: ("Continue has no effect")
Fixes: e08e19c331fb ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/palmas_gpadc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -664,8 +664,8 @@ static int palmas_adc_wakeup_configure(s
adc_period = adc->auto_conversion_period;
for (i = 0; i < 16; ++i) {
- if (((1000 * (1 << i)) / 32) < adc_period)
- continue;
+ if (((1000 * (1 << i)) / 32) >= adc_period)
+ break;
}
if (i > 0)
i--;
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit 8ba3e4c85825c8801a2c298dcadac650a40d7137 ]
mlx5e_close_xdpsq does the cleanup: it calls mlx5e_free_xdpsq_descs to
free the outstanding descriptors, which relies on
mlx5e_page_release_dynamic and page_pool_release_page. However,
page_pool_destroy is already called by this point, because
mlx5e_close_rq runs before mlx5e_close_xdpsq.
This commit fixes the use-after-free by swapping mlx5e_close_xdpsq and
mlx5e_close_rq.
The commit cited below started calling page_pool_destroy directly from
the driver. Previously, the page pool was destroyed under a call_rcu
from xdp_rxq_info_unreg_mem_model, which would defer the deallocation
until after the XDPSQ is cleaned up.
Fixes: 1da4bbeffe41 ("net: core: page_pool: add user refcnt and reintroduce page_pool_destroy")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/mellanox/mlx5/core/en_main.c | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index d0d9acb17253..3221a6a2f221 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1887,30 +1887,30 @@ static int mlx5e_open_queues(struct mlx5e_channel *c,
if (err)
goto err_close_icosq;
+ err = mlx5e_open_rxq_rq(c, params, &cparam->rq);
+ if (err)
+ goto err_close_sqs;
+
if (c->xdp) {
err = mlx5e_open_xdpsq(c, params, &cparam->xdp_sq, NULL,
&c->rq_xdpsq, false);
if (err)
- goto err_close_sqs;
+ goto err_close_rq;
}
- err = mlx5e_open_rxq_rq(c, params, &cparam->rq);
- if (err)
- goto err_close_xdp_sq;
-
err = mlx5e_open_xdpsq(c, params, &cparam->xdp_sq, NULL, &c->xdpsq, true);
if (err)
- goto err_close_rq;
+ goto err_close_xdp_sq;
return 0;
-err_close_rq:
- mlx5e_close_rq(&c->rq);
-
err_close_xdp_sq:
if (c->xdp)
mlx5e_close_xdpsq(&c->rq_xdpsq);
+err_close_rq:
+ mlx5e_close_rq(&c->rq);
+
err_close_sqs:
mlx5e_close_sqs(c);
@@ -1945,9 +1945,9 @@ err_close_async_icosq_cq:
static void mlx5e_close_queues(struct mlx5e_channel *c)
{
mlx5e_close_xdpsq(&c->xdpsq);
- mlx5e_close_rq(&c->rq);
if (c->xdp)
mlx5e_close_xdpsq(&c->rq_xdpsq);
+ mlx5e_close_rq(&c->rq);
mlx5e_close_sqs(c);
mlx5e_close_icosq(&c->icosq);
mlx5e_close_icosq(&c->async_icosq);
--
2.30.2
From: Karsten Graul <[email protected]>
[ Upstream commit 8f3d65c166797746455553f4eaf74a5f89f996d4 ]
There can be a race between the waiters for a tx work request buffer
and the link down processing that finally clears the link. Although
all waiters are woken up before the link is cleared there might be
waiters which did not yet get back control and are still waiting.
This results in an access to a cleared wait queue head.
Fix this by introducing atomic reference counting around the wait calls,
and wait with the link clear processing until all waiters have finished.
Move the work request layer related calls into smc_wr.c and set the
link state to INACTIVE before calling smcr_link_clear() in
smc_llc_srv_add_link().
Fixes: 15e1b99aadfb ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Guvenc Gulce <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/smc_core.h | 2 ++
net/smc/smc_llc.c | 10 ++++------
net/smc/smc_tx.c | 18 +++++++++++++++++-
net/smc/smc_wr.c | 10 ++++++++++
4 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h
index 6d6fd1397c87..64d86298e4df 100644
--- a/net/smc/smc_core.h
+++ b/net/smc/smc_core.h
@@ -97,6 +97,7 @@ struct smc_link {
unsigned long *wr_tx_mask; /* bit mask of used indexes */
u32 wr_tx_cnt; /* number of WR send buffers */
wait_queue_head_t wr_tx_wait; /* wait for free WR send buf */
+ atomic_t wr_tx_refcnt; /* tx refs to link */
struct smc_wr_buf *wr_rx_bufs; /* WR recv payload buffers */
struct ib_recv_wr *wr_rx_ibs; /* WR recv meta data */
@@ -109,6 +110,7 @@ struct smc_link {
struct ib_reg_wr wr_reg; /* WR register memory region */
wait_queue_head_t wr_reg_wait; /* wait for wr_reg result */
+ atomic_t wr_reg_refcnt; /* reg refs to link */
enum smc_wr_reg_state wr_reg_state; /* state of wr_reg request */
u8 gid[SMC_GID_SIZE];/* gid matching used vlan id*/
diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c
index 273eaf1bfe49..2e7560eba981 100644
--- a/net/smc/smc_llc.c
+++ b/net/smc/smc_llc.c
@@ -888,6 +888,7 @@ int smc_llc_cli_add_link(struct smc_link *link, struct smc_llc_qentry *qentry)
if (!rc)
goto out;
out_clear_lnk:
+ lnk_new->state = SMC_LNK_INACTIVE;
smcr_link_clear(lnk_new, false);
out_reject:
smc_llc_cli_add_link_reject(qentry);
@@ -1184,6 +1185,7 @@ int smc_llc_srv_add_link(struct smc_link *link)
goto out_err;
return 0;
out_err:
+ link_new->state = SMC_LNK_INACTIVE;
smcr_link_clear(link_new, false);
return rc;
}
@@ -1286,10 +1288,8 @@ static void smc_llc_process_cli_delete_link(struct smc_link_group *lgr)
del_llc->reason = 0;
smc_llc_send_message(lnk, &qentry->msg); /* response */
- if (smc_link_downing(&lnk_del->state)) {
- if (smc_switch_conns(lgr, lnk_del, false))
- smc_wr_tx_wait_no_pending_sends(lnk_del);
- }
+ if (smc_link_downing(&lnk_del->state))
+ smc_switch_conns(lgr, lnk_del, false);
smcr_link_clear(lnk_del, true);
active_links = smc_llc_active_link_count(lgr);
@@ -1805,8 +1805,6 @@ void smc_llc_link_clear(struct smc_link *link, bool log)
link->smcibdev->ibdev->name, link->ibport);
complete(&link->llc_testlink_resp);
cancel_delayed_work_sync(&link->llc_testlink_wrk);
- smc_wr_wakeup_reg_wait(link);
- smc_wr_wakeup_tx_wait(link);
}
/* register a new rtoken at the remote peer (for all links) */
diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c
index 4532c16bf85e..ff02952b3d03 100644
--- a/net/smc/smc_tx.c
+++ b/net/smc/smc_tx.c
@@ -479,7 +479,7 @@ static int smc_tx_rdma_writes(struct smc_connection *conn,
/* Wakeup sndbuf consumers from any context (IRQ or process)
* since there is more data to transmit; usable snd_wnd as max transmit
*/
-static int smcr_tx_sndbuf_nonempty(struct smc_connection *conn)
+static int _smcr_tx_sndbuf_nonempty(struct smc_connection *conn)
{
struct smc_cdc_producer_flags *pflags = &conn->local_tx_ctrl.prod_flags;
struct smc_link *link = conn->lnk;
@@ -533,6 +533,22 @@ out_unlock:
return rc;
}
+static int smcr_tx_sndbuf_nonempty(struct smc_connection *conn)
+{
+ struct smc_link *link = conn->lnk;
+ int rc = -ENOLINK;
+
+ if (!link)
+ return rc;
+
+ atomic_inc(&link->wr_tx_refcnt);
+ if (smc_link_usable(link))
+ rc = _smcr_tx_sndbuf_nonempty(conn);
+ if (atomic_dec_and_test(&link->wr_tx_refcnt))
+ wake_up_all(&link->wr_tx_wait);
+ return rc;
+}
+
static int smcd_tx_sndbuf_nonempty(struct smc_connection *conn)
{
struct smc_cdc_producer_flags *pflags = &conn->local_tx_ctrl.prod_flags;
diff --git a/net/smc/smc_wr.c b/net/smc/smc_wr.c
index cbc73a7e4d59..a419e9af36b9 100644
--- a/net/smc/smc_wr.c
+++ b/net/smc/smc_wr.c
@@ -322,9 +322,12 @@ int smc_wr_reg_send(struct smc_link *link, struct ib_mr *mr)
if (rc)
return rc;
+ atomic_inc(&link->wr_reg_refcnt);
rc = wait_event_interruptible_timeout(link->wr_reg_wait,
(link->wr_reg_state != POSTED),
SMC_WR_REG_MR_WAIT_TIME);
+ if (atomic_dec_and_test(&link->wr_reg_refcnt))
+ wake_up_all(&link->wr_reg_wait);
if (!rc) {
/* timeout - terminate link */
smcr_link_down_cond_sched(link);
@@ -566,10 +569,15 @@ void smc_wr_free_link(struct smc_link *lnk)
return;
ibdev = lnk->smcibdev->ibdev;
+ smc_wr_wakeup_reg_wait(lnk);
+ smc_wr_wakeup_tx_wait(lnk);
+
if (smc_wr_tx_wait_no_pending_sends(lnk))
memset(lnk->wr_tx_mask, 0,
BITS_TO_LONGS(SMC_WR_BUF_CNT) *
sizeof(*lnk->wr_tx_mask));
+ wait_event(lnk->wr_reg_wait, (!atomic_read(&lnk->wr_reg_refcnt)));
+ wait_event(lnk->wr_tx_wait, (!atomic_read(&lnk->wr_tx_refcnt)));
if (lnk->wr_rx_dma_addr) {
ib_dma_unmap_single(ibdev, lnk->wr_rx_dma_addr,
@@ -728,7 +736,9 @@ int smc_wr_create_link(struct smc_link *lnk)
memset(lnk->wr_tx_mask, 0,
BITS_TO_LONGS(SMC_WR_BUF_CNT) * sizeof(*lnk->wr_tx_mask));
init_waitqueue_head(&lnk->wr_tx_wait);
+ atomic_set(&lnk->wr_tx_refcnt, 0);
init_waitqueue_head(&lnk->wr_reg_wait);
+ atomic_set(&lnk->wr_reg_refcnt, 0);
return rc;
dma_unmap:
--
2.30.2
From: Guvenc Gulce <[email protected]>
[ Upstream commit 64513d269e8971aabb7e787955a1b320e3031306 ]
SMC clients may be assigned to a different link after the initial
connection between two peers was established. In such a case,
the connection counter was not correctly set.
Update the connection counter correctly when a smc client connection
is assigned to a different smc link.
Fixes: 07d51580ff65 ("net/smc: Add connection counters for links")
Signed-off-by: Guvenc Gulce <[email protected]>
Tested-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 2 +-
net/smc/smc_core.c | 4 ++--
net/smc/smc_core.h | 2 ++
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5eff7cccceff..66fbdc63f965 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -757,7 +757,7 @@ static int smc_connect_rdma(struct smc_sock *smc,
reason_code = SMC_CLC_DECL_NOSRVLINK;
goto connect_abort;
}
- smc->conn.lnk = link;
+ smc_switch_link_and_count(&smc->conn, link);
}
/* create send buffer and rmb */
diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index 0df85a12651e..39b24f98eac5 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -916,8 +916,8 @@ static int smc_switch_cursor(struct smc_sock *smc, struct smc_cdc_tx_pend *pend,
return rc;
}
-static void smc_switch_link_and_count(struct smc_connection *conn,
- struct smc_link *to_lnk)
+void smc_switch_link_and_count(struct smc_connection *conn,
+ struct smc_link *to_lnk)
{
atomic_dec(&conn->lnk->conn_cnt);
conn->lnk = to_lnk;
diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h
index 64d86298e4df..c043ecdca5c4 100644
--- a/net/smc/smc_core.h
+++ b/net/smc/smc_core.h
@@ -446,6 +446,8 @@ void smc_core_exit(void);
int smcr_link_init(struct smc_link_group *lgr, struct smc_link *lnk,
u8 link_idx, struct smc_init_info *ini);
void smcr_link_clear(struct smc_link *lnk, bool log);
+void smc_switch_link_and_count(struct smc_connection *conn,
+ struct smc_link *to_lnk);
int smcr_buf_map_lgr(struct smc_link *lnk);
int smcr_buf_reg_lgr(struct smc_link *lnk);
void smcr_lgr_set_type(struct smc_link_group *lgr, enum smc_lgr_type new_type);
--
2.30.2
From: Md Fahad Iqbal Polash <[email protected]>
[ Upstream commit a7550f8b1c9712894f9e98d6caf5f49451ebd058 ]
iavf driver should set RSS LUT and key unconditionally in reset
path. Currently, the driver does not do that. This patch fixes
this issue.
Fixes: 2c86ac3c7079 ("i40evf: create a generic config RSS function")
Signed-off-by: Md Fahad Iqbal Polash <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 44bafedd09f2..244ec74ceca7 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -1506,11 +1506,6 @@ static int iavf_reinit_interrupt_scheme(struct iavf_adapter *adapter)
set_bit(__IAVF_VSI_DOWN, adapter->vsi.state);
iavf_map_rings_to_vectors(adapter);
-
- if (RSS_AQ(adapter))
- adapter->aq_required |= IAVF_FLAG_AQ_CONFIGURE_RSS;
- else
- err = iavf_init_rss(adapter);
err:
return err;
}
@@ -2200,6 +2195,14 @@ continue_reset:
goto reset_err;
}
+ if (RSS_AQ(adapter)) {
+ adapter->aq_required |= IAVF_FLAG_AQ_CONFIGURE_RSS;
+ } else {
+ err = iavf_init_rss(adapter);
+ if (err)
+ goto reset_err;
+ }
+
adapter->aq_required |= IAVF_FLAG_AQ_GET_CONFIG;
adapter->aq_required |= IAVF_FLAG_AQ_MAP_VECTORS;
--
2.30.2
From: Tatsuhiko Yasumatsu <[email protected]>
[ Upstream commit c4eb1f403243fc7bbb7de644db8587c03de36da6 ]
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated
over to count the number of elements in each bucket (bucket_size).
If bucket_size is large enough, the multiplication to calculate
kvmalloc() size could overflow, resulting in out-of-bounds write
as reported by KASAN:
[...]
[ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112
[ 104.986889]
[ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13
[ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 104.988104] Call Trace:
[ 104.988410] dump_stack_lvl+0x34/0x44
[ 104.988706] print_address_description.constprop.0+0x21/0x140
[ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989622] kasan_report.cold+0x7f/0x11b
[ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990239] kasan_check_range+0x17c/0x1e0
[ 104.990467] memcpy+0x39/0x60
[ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990982] ? __wake_up_common+0x4d/0x230
[ 104.991256] ? htab_of_map_free+0x130/0x130
[ 104.991541] bpf_map_do_batch+0x1fb/0x220
[...]
In hashtable, if the elements' keys have the same jhash() value, the
elements will be put into the same bucket. By putting a lot of elements
into a single bucket, the value of bucket_size can be increased to
trigger the integer overflow.
Triggering the overflow is possible for both callers with CAP_SYS_ADMIN
and callers without CAP_SYS_ADMIN.
It will be trivial for a caller with CAP_SYS_ADMIN to intentionally
reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set
the random seed passed to jhash() to 0, it will be easy for the caller
to prepare keys which will be hashed into the same value, and thus put
all the elements into the same bucket.
If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be
used. However, it will be still technically possible to trigger the
overflow, by guessing the random seed value passed to jhash() (32bit)
and repeating the attempt to trigger the overflow. In this case,
the probability to trigger the overflow will be low and will take
a very long time.
Fix the integer overflow by calling kvmalloc_array() instead of
kvmalloc() to allocate memory.
Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Tatsuhiko Yasumatsu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/hashtab.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index d7ebb12ffffc..49857e8cd6ce 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -1464,8 +1464,8 @@ alloc:
/* We cannot do copy_from_user or copy_to_user inside
* the rcu_read_lock. Allocate enough space here.
*/
- keys = kvmalloc(key_size * bucket_size, GFP_USER | __GFP_NOWARN);
- values = kvmalloc(value_size * bucket_size, GFP_USER | __GFP_NOWARN);
+ keys = kvmalloc_array(key_size, bucket_size, GFP_USER | __GFP_NOWARN);
+ values = kvmalloc_array(value_size, bucket_size, GFP_USER | __GFP_NOWARN);
if (!keys || !values) {
ret = -ENOMEM;
goto after_loop;
--
2.30.2
From: Shay Drory <[email protected]>
[ Upstream commit 563476ae0c5e48a028cbfa38fa9d2fc0418eb88f ]
The CQ destroy is performed based on the IRQ number that is stored in
cq->irqn. That number wasn't set explicitly during CQ creation and as
expected some of the API users of mlx5_core_create_cq() forgot to update
it.
This caused to wrong synchronization call of the wrong IRQ with a number
0 instead of the real one.
As a fix, set the IRQ number directly in the mlx5_core_create_cq() and
update all users accordingly.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Fixes: ef1659ade359 ("IB/mlx5: Add DEVX support for CQ events")
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/cq.c | 4 +---
drivers/infiniband/hw/mlx5/devx.c | 3 +--
drivers/net/ethernet/mellanox/mlx5/core/cq.c | 1 +
.../net/ethernet/mellanox/mlx5/core/en_main.c | 13 ++----------
drivers/net/ethernet/mellanox/mlx5/core/eq.c | 20 +++++++++++++++----
.../ethernet/mellanox/mlx5/core/fpga/conn.c | 4 +---
.../net/ethernet/mellanox/mlx5/core/lib/eq.h | 2 ++
.../mellanox/mlx5/core/steering/dr_send.c | 4 +---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 3 +--
include/linux/mlx5/driver.h | 3 +--
10 files changed, 27 insertions(+), 30 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c
index 9ce01f729673..e14a14b634a5 100644
--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -941,7 +941,6 @@ int mlx5_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
u32 *cqb = NULL;
void *cqc;
int cqe_size;
- unsigned int irqn;
int eqn;
int err;
@@ -980,7 +979,7 @@ int mlx5_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
INIT_WORK(&cq->notify_work, notify_soft_wc_handler);
}
- err = mlx5_vector2eqn(dev->mdev, vector, &eqn, &irqn);
+ err = mlx5_vector2eqn(dev->mdev, vector, &eqn);
if (err)
goto err_cqb;
@@ -1003,7 +1002,6 @@ int mlx5_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
goto err_cqb;
mlx5_ib_dbg(dev, "cqn 0x%x\n", cq->mcq.cqn);
- cq->mcq.irqn = irqn;
if (udata)
cq->mcq.tasklet_ctx.comp = mlx5_ib_cq_comp;
else
diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index eb9b0a2707f8..c869b2a91a28 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -975,7 +975,6 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_QUERY_EQN)(
struct mlx5_ib_dev *dev;
int user_vector;
int dev_eqn;
- unsigned int irqn;
int err;
if (uverbs_copy_from(&user_vector, attrs,
@@ -987,7 +986,7 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_QUERY_EQN)(
return PTR_ERR(c);
dev = to_mdev(c->ibucontext.device);
- err = mlx5_vector2eqn(dev->mdev, user_vector, &dev_eqn, &irqn);
+ err = mlx5_vector2eqn(dev->mdev, user_vector, &dev_eqn);
if (err < 0)
return err;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cq.c b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
index df3e4938ecdd..360e093874d4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
@@ -134,6 +134,7 @@ int mlx5_core_create_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
cq->cqn);
cq->uar = dev->priv.uar;
+ cq->irqn = eq->core.irqn;
return 0;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 3221a6a2f221..779a4abead01 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1531,15 +1531,9 @@ static int mlx5e_alloc_cq_common(struct mlx5e_priv *priv,
{
struct mlx5_core_dev *mdev = priv->mdev;
struct mlx5_core_cq *mcq = &cq->mcq;
- int eqn_not_used;
- unsigned int irqn;
int err;
u32 i;
- err = mlx5_vector2eqn(mdev, param->eq_ix, &eqn_not_used, &irqn);
- if (err)
- return err;
-
err = mlx5_cqwq_create(mdev, ¶m->wq, param->cqc, &cq->wq,
&cq->wq_ctrl);
if (err)
@@ -1553,7 +1547,6 @@ static int mlx5e_alloc_cq_common(struct mlx5e_priv *priv,
mcq->vector = param->eq_ix;
mcq->comp = mlx5e_completion_event;
mcq->event = mlx5e_cq_error_event;
- mcq->irqn = irqn;
for (i = 0; i < mlx5_cqwq_get_size(&cq->wq); i++) {
struct mlx5_cqe64 *cqe = mlx5_cqwq_get_wqe(&cq->wq, i);
@@ -1601,11 +1594,10 @@ static int mlx5e_create_cq(struct mlx5e_cq *cq, struct mlx5e_cq_param *param)
void *in;
void *cqc;
int inlen;
- unsigned int irqn_not_used;
int eqn;
int err;
- err = mlx5_vector2eqn(mdev, param->eq_ix, &eqn, &irqn_not_used);
+ err = mlx5_vector2eqn(mdev, param->eq_ix, &eqn);
if (err)
return err;
@@ -1979,9 +1971,8 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix,
struct mlx5e_channel *c;
unsigned int irq;
int err;
- int eqn;
- err = mlx5_vector2eqn(priv->mdev, ix, &eqn, &irq);
+ err = mlx5_vector2irqn(priv->mdev, ix, &irq);
if (err)
return err;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
index 940333410267..0879551161d2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
@@ -871,8 +871,8 @@ clean:
return err;
}
-int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn,
- unsigned int *irqn)
+static int vector2eqnirqn(struct mlx5_core_dev *dev, int vector, int *eqn,
+ unsigned int *irqn)
{
struct mlx5_eq_table *table = dev->priv.eq_table;
struct mlx5_eq_comp *eq, *n;
@@ -881,8 +881,10 @@ int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn,
list_for_each_entry_safe(eq, n, &table->comp_eqs_list, list) {
if (i++ == vector) {
- *eqn = eq->core.eqn;
- *irqn = eq->core.irqn;
+ if (irqn)
+ *irqn = eq->core.irqn;
+ if (eqn)
+ *eqn = eq->core.eqn;
err = 0;
break;
}
@@ -890,8 +892,18 @@ int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn,
return err;
}
+
+int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn)
+{
+ return vector2eqnirqn(dev, vector, eqn, NULL);
+}
EXPORT_SYMBOL(mlx5_vector2eqn);
+int mlx5_vector2irqn(struct mlx5_core_dev *dev, int vector, unsigned int *irqn)
+{
+ return vector2eqnirqn(dev, vector, NULL, irqn);
+}
+
unsigned int mlx5_comp_vectors_count(struct mlx5_core_dev *dev)
{
return dev->priv.eq_table->num_comp_eqs;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
index bd66ab2af5b5..d5da4ab65766 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
@@ -417,7 +417,6 @@ static int mlx5_fpga_conn_create_cq(struct mlx5_fpga_conn *conn, int cq_size)
struct mlx5_wq_param wqp;
struct mlx5_cqe64 *cqe;
int inlen, err, eqn;
- unsigned int irqn;
void *cqc, *in;
__be64 *pas;
u32 i;
@@ -446,7 +445,7 @@ static int mlx5_fpga_conn_create_cq(struct mlx5_fpga_conn *conn, int cq_size)
goto err_cqwq;
}
- err = mlx5_vector2eqn(mdev, smp_processor_id(), &eqn, &irqn);
+ err = mlx5_vector2eqn(mdev, smp_processor_id(), &eqn);
if (err) {
kvfree(in);
goto err_cqwq;
@@ -476,7 +475,6 @@ static int mlx5_fpga_conn_create_cq(struct mlx5_fpga_conn *conn, int cq_size)
*conn->cq.mcq.arm_db = 0;
conn->cq.mcq.vector = 0;
conn->cq.mcq.comp = mlx5_fpga_conn_cq_complete;
- conn->cq.mcq.irqn = irqn;
conn->cq.mcq.uar = fdev->conn_res.uar;
tasklet_setup(&conn->cq.tasklet, mlx5_fpga_conn_cq_tasklet);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h
index f607a3858ef5..bd3ed8660483 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h
@@ -103,4 +103,6 @@ void mlx5_core_eq_free_irqs(struct mlx5_core_dev *dev);
struct cpu_rmap *mlx5_eq_table_get_rmap(struct mlx5_core_dev *dev);
#endif
+int mlx5_vector2irqn(struct mlx5_core_dev *dev, int vector, unsigned int *irqn);
+
#endif
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
index 12cf323a5943..9df0e73d1c35 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
@@ -749,7 +749,6 @@ static struct mlx5dr_cq *dr_create_cq(struct mlx5_core_dev *mdev,
struct mlx5_cqe64 *cqe;
struct mlx5dr_cq *cq;
int inlen, err, eqn;
- unsigned int irqn;
void *cqc, *in;
__be64 *pas;
int vector;
@@ -782,7 +781,7 @@ static struct mlx5dr_cq *dr_create_cq(struct mlx5_core_dev *mdev,
goto err_cqwq;
vector = raw_smp_processor_id() % mlx5_comp_vectors_count(mdev);
- err = mlx5_vector2eqn(mdev, vector, &eqn, &irqn);
+ err = mlx5_vector2eqn(mdev, vector, &eqn);
if (err) {
kvfree(in);
goto err_cqwq;
@@ -818,7 +817,6 @@ static struct mlx5dr_cq *dr_create_cq(struct mlx5_core_dev *mdev,
*cq->mcq.arm_db = cpu_to_be32(2 << 28);
cq->mcq.vector = 0;
- cq->mcq.irqn = irqn;
cq->mcq.uar = uar;
return cq;
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 32dd5ed712cb..f3495386698a 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -526,7 +526,6 @@ static int cq_create(struct mlx5_vdpa_net *ndev, u16 idx, u32 num_ent)
void __iomem *uar_page = ndev->mvdev.res.uar->map;
u32 out[MLX5_ST_SZ_DW(create_cq_out)];
struct mlx5_vdpa_cq *vcq = &mvq->cq;
- unsigned int irqn;
__be64 *pas;
int inlen;
void *cqc;
@@ -566,7 +565,7 @@ static int cq_create(struct mlx5_vdpa_net *ndev, u16 idx, u32 num_ent)
/* Use vector 0 by default. Consider adding code to choose least used
* vector.
*/
- err = mlx5_vector2eqn(mdev, 0, &eqn, &irqn);
+ err = mlx5_vector2eqn(mdev, 0, &eqn);
if (err)
goto err_vec;
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index f8902bcd91e2..58236808fdf4 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1042,8 +1042,7 @@ void mlx5_unregister_debugfs(void);
void mlx5_fill_page_array(struct mlx5_frag_buf *buf, __be64 *pas);
void mlx5_fill_page_frag_array_perm(struct mlx5_frag_buf *buf, __be64 *pas, u8 perm);
void mlx5_fill_page_frag_array(struct mlx5_frag_buf *frag_buf, __be64 *pas);
-int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn,
- unsigned int *irqn);
+int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn);
int mlx5_core_attach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid, u32 qpn);
int mlx5_core_detach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid, u32 qpn);
--
2.30.2
From: Roi Dayan <[email protected]>
[ Upstream commit c623c95afa56bf4bf64e4f58742dc94616ef83db ]
It could be local and remote are on the same machine and the route
result will be a local route which will result in creating encap id
with src/dst mac address of 0.
Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
index 172e0474f2e6..3980a3905084 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
@@ -124,6 +124,11 @@ static int mlx5e_route_lookup_ipv4_get(struct mlx5e_priv *priv,
if (IS_ERR(rt))
return PTR_ERR(rt);
+ if (rt->rt_type != RTN_UNICAST) {
+ ret = -ENETUNREACH;
+ goto err_rt_release;
+ }
+
if (mlx5_lag_is_multipath(mdev) && rt->rt_gw_family != AF_INET) {
ret = -ENETUNREACH;
goto err_rt_release;
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit ef3b02a1d79b691f9a354c4903cf1e6917e315f9 ]
ksz8795 has never actually enabled PVID tag insertion, and it also
programmed the PVID incorrectly. To fix this:
* Allow tag insertion to be controlled per ingress port. On most
chips, set bit 2 in Global Control 19. On KSZ88x3 this control
flag doesn't exist.
* When adding a PVID:
- Set the appropriate register bits to enable tag insertion on
egress at every other port if this was the packet's ingress port.
- Mask *out* the VID from the default tag, before or-ing in the new
PVID.
* When removing a PVID:
- Clear the same control bits to disable tag insertion.
- Don't update the default tag. This wasn't doing anything useful.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795.c | 26 ++++++++++++++++++-------
drivers/net/dsa/microchip/ksz8795_reg.h | 4 ++++
2 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index ad509a57a945..bc9ca2b0e091 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1083,6 +1083,16 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
return 0;
}
+static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state)
+{
+ if (ksz_is_ksz88x3(dev)) {
+ ksz_cfg(dev, REG_SW_INSERT_SRC_PVID,
+ 0x03 << (4 - 2 * port), state);
+ } else {
+ ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00);
+ }
+}
+
static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack)
@@ -1119,9 +1129,11 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
u16 vid;
ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
- vid &= 0xfff;
+ vid &= ~VLAN_VID_MASK;
vid |= new_pvid;
ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+
+ ksz8_port_enable_pvid(dev, port, true);
}
return 0;
@@ -1132,7 +1144,7 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
- u16 data, pvid, new_pvid = 0;
+ u16 data, pvid;
u8 fid, member, valid;
if (ksz_is_ksz88x3(dev))
@@ -1154,14 +1166,11 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
valid = 0;
}
- if (pvid == vlan->vid)
- new_pvid = 1;
-
ksz8_to_vlan(dev, fid, member, valid, &data);
ksz8_w_vlan_table(dev, vlan->vid, data);
- if (new_pvid != pvid)
- ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
+ if (pvid == vlan->vid)
+ ksz8_port_enable_pvid(dev, port, false);
return 0;
}
@@ -1394,6 +1403,9 @@ static int ksz8_setup(struct dsa_switch *ds)
ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+ if (!ksz_is_ksz88x3(dev))
+ ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true);
+
/* set broadcast storm protection 10% rate */
regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
BROADCAST_STORM_RATE,
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index c2e52c40a54c..383ba7a90f9c 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -631,6 +631,10 @@
#define REG_PORT_4_OUT_RATE_3 0xEE
#define REG_PORT_5_OUT_RATE_3 0xFE
+/* 88x3 specific */
+
+#define REG_SW_INSERT_SRC_PVID 0xC2
+
/* PME */
#define SW_PME_OUTPUT_ENABLE BIT(1)
--
2.30.2
From: Kan Liang <[email protected]>
[ Upstream commit acade6379930dfa7987f4bd9b26d1a701cc1b542 ]
A warning as below may be occasionally triggered in an ADL machine when
these conditions occur:
- Two perf record commands run one by one. Both record a PEBS event.
- Both runs on small cores.
- They have different adaptive PEBS configuration (PEBS_DATA_CFG).
[ ] WARNING: CPU: 4 PID: 9874 at arch/x86/events/intel/ds.c:1743 setup_pebs_adaptive_sample_data+0x55e/0x5b0
[ ] RIP: 0010:setup_pebs_adaptive_sample_data+0x55e/0x5b0
[ ] Call Trace:
[ ] <NMI>
[ ] intel_pmu_drain_pebs_icl+0x48b/0x810
[ ] perf_event_nmi_handler+0x41/0x80
[ ] </NMI>
[ ] __perf_event_task_sched_in+0x2c2/0x3a0
Different from the big core, the small core requires the ACK right
before re-enabling counters in the NMI handler, otherwise a stale PEBS
record may be dumped into the later NMI handler, which trigger the
warning.
Add a new mid_ack flag to track the case. Add all PMI handler bits in
the struct x86_hybrid_pmu to track the bits for different types of
PMUs. Apply mid ACK for the small cores on an Alder Lake machine.
The existing hybrid() macro has a compile error when taking address of
a bit-field variable. Add a new macro hybrid_bit() to get the
bit-field value of a given PMU.
Fixes: f83d2f91d259 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Ammy Yi <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Tested-by: Ammy Yi <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/core.c | 23 +++++++++++++++--------
arch/x86/events/perf_event.h | 15 +++++++++++++++
2 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index d76be3bba11e..511d1f9a9bf8 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2904,24 +2904,28 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)
*/
static int intel_pmu_handle_irq(struct pt_regs *regs)
{
- struct cpu_hw_events *cpuc;
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+ bool late_ack = hybrid_bit(cpuc->pmu, late_ack);
+ bool mid_ack = hybrid_bit(cpuc->pmu, mid_ack);
int loops;
u64 status;
int handled;
int pmu_enabled;
- cpuc = this_cpu_ptr(&cpu_hw_events);
-
/*
* Save the PMU state.
* It needs to be restored when leaving the handler.
*/
pmu_enabled = cpuc->enabled;
/*
- * No known reason to not always do late ACK,
- * but just in case do it opt-in.
+ * In general, the early ACK is only applied for old platforms.
+ * For the big core starts from Haswell, the late ACK should be
+ * applied.
+ * For the small core after Tremont, we have to do the ACK right
+ * before re-enabling counters, which is in the middle of the
+ * NMI handler.
*/
- if (!x86_pmu.late_ack)
+ if (!late_ack && !mid_ack)
apic_write(APIC_LVTPC, APIC_DM_NMI);
intel_bts_disable_local();
cpuc->enabled = 0;
@@ -2958,6 +2962,8 @@ again:
goto again;
done:
+ if (mid_ack)
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
/* Only restore PMU state when it's active. See x86_pmu_disable(). */
cpuc->enabled = pmu_enabled;
if (pmu_enabled)
@@ -2969,7 +2975,7 @@ done:
* have been reset. This avoids spurious NMIs on
* Haswell CPUs.
*/
- if (x86_pmu.late_ack)
+ if (late_ack)
apic_write(APIC_LVTPC, APIC_DM_NMI);
return handled;
}
@@ -6123,7 +6129,6 @@ __init int intel_pmu_init(void)
static_branch_enable(&perf_is_hybrid);
x86_pmu.num_hybrid_pmus = X86_HYBRID_NUM_PMUS;
- x86_pmu.late_ack = true;
x86_pmu.pebs_aliases = NULL;
x86_pmu.pebs_prec_dist = true;
x86_pmu.pebs_block = true;
@@ -6161,6 +6166,7 @@ __init int intel_pmu_init(void)
pmu = &x86_pmu.hybrid_pmu[X86_HYBRID_PMU_CORE_IDX];
pmu->name = "cpu_core";
pmu->cpu_type = hybrid_big;
+ pmu->late_ack = true;
if (cpu_feature_enabled(X86_FEATURE_HYBRID_CPU)) {
pmu->num_counters = x86_pmu.num_counters + 2;
pmu->num_counters_fixed = x86_pmu.num_counters_fixed + 1;
@@ -6186,6 +6192,7 @@ __init int intel_pmu_init(void)
pmu = &x86_pmu.hybrid_pmu[X86_HYBRID_PMU_ATOM_IDX];
pmu->name = "cpu_atom";
pmu->cpu_type = hybrid_small;
+ pmu->mid_ack = true;
pmu->num_counters = x86_pmu.num_counters;
pmu->num_counters_fixed = x86_pmu.num_counters_fixed;
pmu->max_pebs_events = x86_pmu.max_pebs_events;
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 2938c902ffbe..e3ac05c97b5e 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -656,6 +656,10 @@ struct x86_hybrid_pmu {
struct event_constraint *event_constraints;
struct event_constraint *pebs_constraints;
struct extra_reg *extra_regs;
+
+ unsigned int late_ack :1,
+ mid_ack :1,
+ enabled_ack :1;
};
static __always_inline struct x86_hybrid_pmu *hybrid_pmu(struct pmu *pmu)
@@ -686,6 +690,16 @@ extern struct static_key_false perf_is_hybrid;
__Fp; \
}))
+#define hybrid_bit(_pmu, _field) \
+({ \
+ bool __Fp = x86_pmu._field; \
+ \
+ if (is_hybrid() && (_pmu)) \
+ __Fp = hybrid_pmu(_pmu)->_field; \
+ \
+ __Fp; \
+})
+
enum hybrid_pmu_type {
hybrid_big = 0x40,
hybrid_small = 0x20,
@@ -755,6 +769,7 @@ struct x86_pmu {
/* PMI handler bits */
unsigned int late_ack :1,
+ mid_ack :1,
enabled_ack :1;
/*
* sysfs attrs
--
2.30.2
From: Hao Xu <[email protected]>
[ Upstream commit 49e7f0c789add1330b111af0b7caeb0e87df063e ]
The former patch to add check between nr_workers and max_workers has a
bug, which will cause unconditionally creating io-workers. That's
because the result of the check doesn't affect the call of
create_io_worker(), fix it by bringing in a boolean value for it.
Fixes: 21698274da5b ("io-wq: fix lack of acct->nr_workers < acct->max_workers judgement")
Signed-off-by: Hao Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[axboe: drop hunk that isn't strictly needed]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io-wq.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/fs/io-wq.c b/fs/io-wq.c
index 77026d42cb79..2c8a9a394884 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -283,16 +283,24 @@ static void create_worker_cb(struct callback_head *cb)
struct io_wq *wq;
struct io_wqe *wqe;
struct io_wqe_acct *acct;
+ bool do_create = false;
cwd = container_of(cb, struct create_worker_data, work);
wqe = cwd->wqe;
wq = wqe->wq;
acct = &wqe->acct[cwd->index];
raw_spin_lock_irq(&wqe->lock);
- if (acct->nr_workers < acct->max_workers)
+ if (acct->nr_workers < acct->max_workers) {
acct->nr_workers++;
+ do_create = true;
+ }
raw_spin_unlock_irq(&wqe->lock);
- create_io_worker(wq, cwd->wqe, cwd->index);
+ if (do_create) {
+ create_io_worker(wq, cwd->wqe, cwd->index);
+ } else {
+ atomic_dec(&acct->nr_running);
+ io_worker_ref_put(wq);
+ }
kfree(cwd);
}
--
2.30.2
From: Zhenyu Wang <[email protected]>
commit 699aa57b35672c3b2f230e2b7e5d0ab8c2bde80a upstream.
We've seen recent regression with host and windows VM running
simultaneously that cause gpu hang or even crash. Finally bisect to
commit 58586680ffad ("drm/i915: Disable atomics in L3 for gen9"),
which seems cached atomics behavior difference caused regression
issue.
This tries to add new scratch register handler and add those in mmio
save/restore list for context switch. No gpu hang produced with this one.
Cc: [email protected] # 5.12+
Cc: "Xu, Terrence" <[email protected]>
Cc: "Bloomfield, Jon" <[email protected]>
Cc: "Ekstrand, Jason" <[email protected]>
Reviewed-by: Colin Xu <[email protected]>
Fixes: 58586680ffad ("drm/i915: Disable atomics in L3 for gen9")
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gvt/handlers.c | 1 +
drivers/gpu/drm/i915/gvt/mmio_context.c | 2 ++
2 files changed, 3 insertions(+)
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -3149,6 +3149,7 @@ static int init_bdw_mmio_info(struct int
MMIO_DFH(_MMIO(0xb100), D_BDW, F_CMD_ACCESS, NULL, NULL);
MMIO_DFH(_MMIO(0xb10c), D_BDW, F_CMD_ACCESS, NULL, NULL);
MMIO_D(_MMIO(0xb110), D_BDW);
+ MMIO_D(GEN9_SCRATCH_LNCF1, D_BDW_PLUS);
MMIO_F(_MMIO(0x24d0), 48, F_CMD_ACCESS | F_CMD_WRITE_PATCH, 0, 0,
D_BDW_PLUS, NULL, force_nonpriv_write);
--- a/drivers/gpu/drm/i915/gvt/mmio_context.c
+++ b/drivers/gpu/drm/i915/gvt/mmio_context.c
@@ -105,6 +105,8 @@ static struct engine_mmio gen9_engine_mm
{RCS0, COMMON_SLICE_CHICKEN2, 0xffff, true}, /* 0x7014 */
{RCS0, GEN9_CS_DEBUG_MODE1, 0xffff, false}, /* 0x20ec */
{RCS0, GEN8_L3SQCREG4, 0, false}, /* 0xb118 */
+ {RCS0, GEN9_SCRATCH1, 0, false}, /* 0xb11c */
+ {RCS0, GEN9_SCRATCH_LNCF1, 0, false}, /* 0xb008 */
{RCS0, GEN7_HALF_SLICE_CHICKEN1, 0xffff, true}, /* 0xe100 */
{RCS0, HALF_SLICE_CHICKEN2, 0xffff, true}, /* 0xe180 */
{RCS0, HALF_SLICE_CHICKEN3, 0xffff, true}, /* 0xe184 */
From: Miklos Szeredi <[email protected]>
[ Upstream commit 9b91b6b019fda817eb52f728eb9c79b3579760bc ]
There's possibility of an ABBA deadlock in case of a splice write to an
overlayfs file and a concurrent splice write to a corresponding real file.
The call chain for splice to an overlay file:
-> do_splice [takes sb_writers on overlay file]
-> do_splice_from
-> iter_file_splice_write [takes pipe->mutex]
-> vfs_iter_write
...
-> ovl_write_iter [takes sb_writers on real file]
And the call chain for splice to a real file:
-> do_splice [takes sb_writers on real file]
-> do_splice_from
-> iter_file_splice_write [takes pipe->mutex]
Syzbot successfully bisected this to commit 82a763e61e2b ("ovl: simplify
file splice").
Fix by reverting the write part of the above commit and by adding missing
bits from ovl_write_iter() into ovl_splice_write().
Fixes: 82a763e61e2b ("ovl: simplify file splice")
Reported-and-tested-by: [email protected]
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/overlayfs/file.c | 47 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
index 4d53d3b7e5fe..d081faa55e83 100644
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -392,6 +392,51 @@ out_unlock:
return ret;
}
+/*
+ * Calling iter_file_splice_write() directly from overlay's f_op may deadlock
+ * due to lock order inversion between pipe->mutex in iter_file_splice_write()
+ * and file_start_write(real.file) in ovl_write_iter().
+ *
+ * So do everything ovl_write_iter() does and call iter_file_splice_write() on
+ * the real file.
+ */
+static ssize_t ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
+ loff_t *ppos, size_t len, unsigned int flags)
+{
+ struct fd real;
+ const struct cred *old_cred;
+ struct inode *inode = file_inode(out);
+ struct inode *realinode = ovl_inode_real(inode);
+ ssize_t ret;
+
+ inode_lock(inode);
+ /* Update mode */
+ ovl_copyattr(realinode, inode);
+ ret = file_remove_privs(out);
+ if (ret)
+ goto out_unlock;
+
+ ret = ovl_real_fdget(out, &real);
+ if (ret)
+ goto out_unlock;
+
+ old_cred = ovl_override_creds(inode->i_sb);
+ file_start_write(real.file);
+
+ ret = iter_file_splice_write(pipe, real.file, ppos, len, flags);
+
+ file_end_write(real.file);
+ /* Update size */
+ ovl_copyattr(realinode, inode);
+ revert_creds(old_cred);
+ fdput(real);
+
+out_unlock:
+ inode_unlock(inode);
+
+ return ret;
+}
+
static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
struct fd real;
@@ -603,7 +648,7 @@ const struct file_operations ovl_file_operations = {
.fadvise = ovl_fadvise,
.flush = ovl_flush,
.splice_read = generic_file_splice_read,
- .splice_write = iter_file_splice_write,
+ .splice_write = ovl_splice_write,
.copy_file_range = ovl_copy_file_range,
.remap_file_range = ovl_remap_file_range,
--
2.30.2
From: Brett Creeley <[email protected]>
[ Upstream commit 3ba7f53f8bf1fb862e36c7f74434ac3aceb60158 ]
In some circumstances, such as with bridging, it's possible that the
stack will add the device's own MAC address to its unicast address list.
If, later, the stack deletes this address, the driver will receive a
request to remove this address.
The driver stores its current MAC address as part of the VSI MAC filter
list instead of separately. So, this causes a problem when the device's
MAC address is deleted unexpectedly, which results in traffic failure in
some cases.
The following configuration steps will reproduce the previously
mentioned problem:
> ip link set eth0 up
> ip link add dev br0 type bridge
> ip link set br0 up
> ip addr flush dev eth0
> ip link set eth0 master br0
> echo 1 > /sys/class/net/br0/bridge/vlan_filtering
> modprobe -r veth
> modprobe -r bridge
> ip addr add 192.168.1.100/24 dev eth0
The following ping command fails due to the netdev->dev_addr being
deleted when removing the bridge module.
> ping <link partner>
Fix this by making sure to not delete the netdev->dev_addr during MAC
address sync. After fixing this issue it was noticed that the
netdev_warn() in .set_mac was overly verbose, so make it at
netdev_dbg().
Also, there is a possibility of a race condition between .set_mac and
.set_rx_mode. Fix this by calling netif_addr_lock_bh() and
netif_addr_unlock_bh() on the device's netdev when the netdev->dev_addr
is going to be updated in .set_mac.
Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Liang Li <[email protected]>
Tested-by: Gurucharan G <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_main.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 6a72a3b93037..a7f2f5c490e3 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -183,6 +183,14 @@ static int ice_add_mac_to_unsync_list(struct net_device *netdev, const u8 *addr)
struct ice_netdev_priv *np = netdev_priv(netdev);
struct ice_vsi *vsi = np->vsi;
+ /* Under some circumstances, we might receive a request to delete our
+ * own device address from our uc list. Because we store the device
+ * address in the VSI's MAC filter list, we need to ignore such
+ * requests and not delete our device address from this list.
+ */
+ if (ether_addr_equal(addr, netdev->dev_addr))
+ return 0;
+
if (ice_fltr_add_mac_to_list(vsi, &vsi->tmp_unsync_list, addr,
ICE_FWD_TO_VSI))
return -EINVAL;
@@ -4913,7 +4921,7 @@ static int ice_set_mac_address(struct net_device *netdev, void *pi)
return -EADDRNOTAVAIL;
if (ether_addr_equal(netdev->dev_addr, mac)) {
- netdev_warn(netdev, "already using mac %pM\n", mac);
+ netdev_dbg(netdev, "already using mac %pM\n", mac);
return 0;
}
@@ -4924,6 +4932,7 @@ static int ice_set_mac_address(struct net_device *netdev, void *pi)
return -EBUSY;
}
+ netif_addr_lock_bh(netdev);
/* Clean up old MAC filter. Not an error if old filter doesn't exist */
status = ice_fltr_remove_mac(vsi, netdev->dev_addr, ICE_FWD_TO_VSI);
if (status && status != ICE_ERR_DOES_NOT_EXIST) {
@@ -4933,30 +4942,28 @@ static int ice_set_mac_address(struct net_device *netdev, void *pi)
/* Add filter for new MAC. If filter exists, return success */
status = ice_fltr_add_mac(vsi, mac, ICE_FWD_TO_VSI);
- if (status == ICE_ERR_ALREADY_EXISTS) {
+ if (status == ICE_ERR_ALREADY_EXISTS)
/* Although this MAC filter is already present in hardware it's
* possible in some cases (e.g. bonding) that dev_addr was
* modified outside of the driver and needs to be restored back
* to this value.
*/
- memcpy(netdev->dev_addr, mac, netdev->addr_len);
netdev_dbg(netdev, "filter for MAC %pM already exists\n", mac);
- return 0;
- }
-
- /* error if the new filter addition failed */
- if (status)
+ else if (status)
+ /* error if the new filter addition failed */
err = -EADDRNOTAVAIL;
err_update_filters:
if (err) {
netdev_err(netdev, "can't set MAC %pM. filter update failed\n",
mac);
+ netif_addr_unlock_bh(netdev);
return err;
}
/* change the netdev's MAC address */
memcpy(netdev->dev_addr, mac, netdev->addr_len);
+ netif_addr_unlock_bh(netdev);
netdev_dbg(vsi->netdev, "updated MAC address to %pM\n",
netdev->dev_addr);
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 826da771291fc25a428e871f9e7fb465e390f852 upstream.
X86 IO/APIC and MSI interrupts (when used without interrupts remapping)
require that the affinity setup on startup is done before the interrupt is
enabled for the first time as the non-remapped operation mode cannot safely
migrate enabled interrupts from arbitrary contexts. Provide a new irq chip
flag which allows affected hardware to request this.
This has to be opt-in because there have been reports in the past that some
interrupt chips cannot handle affinity setting before startup.
Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/irq.h | 2 ++
kernel/irq/chip.c | 5 ++++-
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -567,6 +567,7 @@ struct irq_chip {
* IRQCHIP_SUPPORTS_NMI: Chip can deliver NMIs, only for root irqchips
* IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND: Invokes __enable_irq()/__disable_irq() for wake irqs
* in the suspend path if they are in disabled state
+ * IRQCHIP_AFFINITY_PRE_STARTUP: Default affinity update before startup
*/
enum {
IRQCHIP_SET_TYPE_MASKED = (1 << 0),
@@ -579,6 +580,7 @@ enum {
IRQCHIP_SUPPORTS_LEVEL_MSI = (1 << 7),
IRQCHIP_SUPPORTS_NMI = (1 << 8),
IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND = (1 << 9),
+ IRQCHIP_AFFINITY_PRE_STARTUP = (1 << 10),
};
#include <linux/irqdesc.h>
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -265,8 +265,11 @@ int irq_startup(struct irq_desc *desc, b
} else {
switch (__irq_startup_managed(desc, aff, force)) {
case IRQ_STARTUP_NORMAL:
+ if (d->chip->flags & IRQCHIP_AFFINITY_PRE_STARTUP)
+ irq_setup_affinity(desc);
ret = __irq_startup(desc);
- irq_setup_affinity(desc);
+ if (!(d->chip->flags & IRQCHIP_AFFINITY_PRE_STARTUP))
+ irq_setup_affinity(desc);
break;
case IRQ_STARTUP_MANAGED:
irq_do_set_affinity(d, aff, false);
From: Alex Vesker <[email protected]>
[ Upstream commit d3875924dae632d5edd908d285fffc5f07c835a3 ]
While processing encapsulated packet on RX, one of the fields that is
checked is the inner packet length. If the length as specified in the header
doesn't match the actual inner packet length, the packet is invalid
and should be dropped. However, such packet caused the NIC to hang.
This patch turns on a 'fail_on_error' HW bit which allows HW to drop
such an invalid packet while processing RX packet and trying to decap it.
Fixes: ad17dc8cf910 ("net/mlx5: DR, Move STEv0 action apply logic")
Signed-off-by: Alex Vesker <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v0.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v0.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v0.c
index 0757a4e8540e..42446e92aa38 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v0.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v0.c
@@ -352,6 +352,7 @@ static void dr_ste_v0_set_rx_decap(u8 *hw_ste_p)
{
MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
DR_STE_TUNL_ACTION_DECAP);
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, fail_on_error, 1);
}
static void dr_ste_v0_set_rx_pop_vlan(u8 *hw_ste_p)
@@ -365,6 +366,7 @@ static void dr_ste_v0_set_rx_decap_l3(u8 *hw_ste_p, bool vlan)
MLX5_SET(ste_rx_steering_mult, hw_ste_p, tunneling_action,
DR_STE_TUNL_ACTION_L3_DECAP);
MLX5_SET(ste_modify_packet, hw_ste_p, action_description, vlan ? 1 : 0);
+ MLX5_SET(ste_rx_steering_mult, hw_ste_p, fail_on_error, 1);
}
static void dr_ste_v0_set_rewrite_actions(u8 *hw_ste_p, u16 num_of_actions,
--
2.30.2
From: Oleksij Rempel <[email protected]>
[ Upstream commit 47fac45600aafc5939d9620055c3c46f7135d316 ]
Make sure that all external port are actually isolated from each other,
so no packets are leaked.
Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/qca/ar9331.c | 73 +++++++++++++++++++++++++++++++++++-
1 file changed, 72 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 6686192e1883..563d8a279030 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -101,6 +101,23 @@
AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
AR9331_SW_PORT_STATUS_SPEED_M)
+#define AR9331_SW_REG_PORT_CTRL(_port) (0x104 + (_port) * 0x100)
+#define AR9331_SW_PORT_CTRL_HEAD_EN BIT(11)
+#define AR9331_SW_PORT_CTRL_PORT_STATE GENMASK(2, 0)
+#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED 0
+#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING 1
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING 2
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING 3
+#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD 4
+
+#define AR9331_SW_REG_PORT_VLAN(_port) (0x108 + (_port) * 0x100)
+#define AR9331_SW_PORT_VLAN_8021Q_MODE GENMASK(31, 30)
+#define AR9331_SW_8021Q_MODE_SECURE 3
+#define AR9331_SW_8021Q_MODE_CHECK 2
+#define AR9331_SW_8021Q_MODE_FALLBACK 1
+#define AR9331_SW_8021Q_MODE_NONE 0
+#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER GENMASK(25, 16)
+
/* MIB registers */
#define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
@@ -371,12 +388,60 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
return 0;
}
-static int ar9331_sw_setup(struct dsa_switch *ds)
+static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
{
struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
struct regmap *regmap = priv->regmap;
+ u32 port_mask, port_ctrl, val;
int ret;
+ /* Generate default port settings */
+ port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
+ AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD);
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /* CPU port should be allowed to communicate with all user
+ * ports.
+ */
+ port_mask = dsa_user_ports(ds);
+ /* Enable Atheros header on CPU port. This will allow us
+ * communicate with each port separately
+ */
+ port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
+ } else if (dsa_is_user_port(ds, port)) {
+ /* User ports should communicate only with the CPU port.
+ */
+ port_mask = BIT(dsa_upstream_port(ds, port));
+ } else {
+ /* Other ports do not need to communicate at all */
+ port_mask = 0;
+ }
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
+ AR9331_SW_8021Q_MODE_NONE) |
+ FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask);
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
+ if (ret)
+ goto error;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+
+ return ret;
+}
+
+static int ar9331_sw_setup(struct dsa_switch *ds)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret, i;
+
ret = ar9331_sw_reset(priv);
if (ret)
return ret;
@@ -402,6 +467,12 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
if (ret)
goto error;
+ for (i = 0; i < ds->num_ports; i++) {
+ ret = ar9331_sw_setup_port(ds, i);
+ if (ret)
+ goto error;
+ }
+
ds->configure_vlan_while_not_filtering = false;
return 0;
--
2.30.2
From: Benjamin Herrenschmidt <[email protected]>
[ Upstream commit 4152433c397697acc4b02c4a10d17d5859c2730d ]
The EFI stub random allocator used for kaslr on arm64 has a subtle
bug. In function get_entry_num_slots() which counts the number of
possible allocation "slots" for the image in a given chunk of free
EFI memory, "last_slot" can become negative if the chunk is smaller
than the requested allocation size.
The test "if (first_slot > last_slot)" doesn't catch it because
both first_slot and last_slot are unsigned.
I chose not to make them signed to avoid problems if this is ever
used on architectures where there are meaningful addresses with the
top bit set. Instead, fix it with an additional test against the
allocation size.
This can cause a boot failure in addition to a loss of randomisation
due to another bug in the arm64 stub fixed separately.
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Fixes: 2ddbfc81eac8 ("efi: stub: add implementation of efi_random_alloc()")
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/libstub/randomalloc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/firmware/efi/libstub/randomalloc.c b/drivers/firmware/efi/libstub/randomalloc.c
index a408df474d83..724155b9e10d 100644
--- a/drivers/firmware/efi/libstub/randomalloc.c
+++ b/drivers/firmware/efi/libstub/randomalloc.c
@@ -30,6 +30,8 @@ static unsigned long get_entry_num_slots(efi_memory_desc_t *md,
region_end = min(md->phys_addr + md->num_pages * EFI_PAGE_SIZE - 1,
(u64)ULONG_MAX);
+ if (region_end < size)
+ return 0;
first_slot = round_up(md->phys_addr, align);
last_slot = round_down(region_end - size + 1, align);
--
2.30.2
From: Aya Levin <[email protected]>
[ Upstream commit c85a6b8feb16c0cdbbc8d9f581c7861c4a9ac351 ]
Since switchdev mode can't support devlink traps, verify there are
no active devlink traps before moving eswitch to switchdev mode. If
there are active traps, prevent the switchdev mode configuration.
Fixes: eb3862a0525d ("net/mlx5e: Enable traps according to link state")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index b66e12753f37..d0e4daa55a4a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -48,6 +48,7 @@
#include "lib/fs_chains.h"
#include "en_tc.h"
#include "en/mapping.h"
+#include "devlink.h"
#define mlx5_esw_for_each_rep(esw, i, rep) \
xa_for_each(&((esw)->offloads.vport_reps), i, rep)
@@ -2984,12 +2985,19 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode,
if (cur_mlx5_mode == mlx5_mode)
goto unlock;
- if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV)
+ if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV) {
+ if (mlx5_devlink_trap_get_num_active(esw->dev)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Can't change mode while devlink traps are active");
+ err = -EOPNOTSUPP;
+ goto unlock;
+ }
err = esw_offloads_start(esw, extack);
- else if (mode == DEVLINK_ESWITCH_MODE_LEGACY)
+ } else if (mode == DEVLINK_ESWITCH_MODE_LEGACY) {
err = esw_offloads_stop(esw, extack);
- else
+ } else {
err = -EINVAL;
+ }
unlock:
mlx5_esw_unlock(esw);
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit 2383cb9497d113360137a2be308b390faa80632d ]
Commit a5e63c7d38d5 "net: phy: micrel: Fix detection of ksz87xx
switch" broke link detection on the external ports of the KSZ8795.
The previously unused phy_driver structure for these devices specifies
config_aneg and read_status functions that appear to be designed for a
fixed link and do not work with the embedded PHYs in the KSZ8795.
Delete the use of these functions in favour of the generic PHY
implementations which were used previously.
Fixes: a5e63c7d38d5 ("net: phy: micrel: Fix detection of ksz87xx switch")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/micrel.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 7afd9edaf249..22ca29cc9ad7 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1406,8 +1406,6 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KSZ87XX Switch",
/* PHY_BASIC_FEATURES */
.config_init = kszphy_config_init,
- .config_aneg = ksz8873mll_config_aneg,
- .read_status = ksz8873mll_read_status,
.match_phy_device = ksz8795_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 0c0e37dc11671384e53ba6ede53a4d91162a2cc5 upstream.
The IO/APIC cannot handle interrupt affinity changes safely after startup
other than from an interrupt handler. The startup sequence in the generic
interrupt code violates that assumption.
Mark the irq chip with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.
Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/apic/io_apic.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1986,7 +1986,8 @@ static struct irq_chip ioapic_chip __rea
.irq_set_affinity = ioapic_set_affinity,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_get_irqchip_state = ioapic_irq_get_chip_state,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .flags = IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_AFFINITY_PRE_STARTUP,
};
static struct irq_chip ioapic_ir_chip __read_mostly = {
@@ -1999,7 +2000,8 @@ static struct irq_chip ioapic_ir_chip __
.irq_set_affinity = ioapic_set_affinity,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_get_irqchip_state = ioapic_irq_get_chip_state,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .flags = IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_AFFINITY_PRE_STARTUP,
};
static inline void init_IO_APIC_traps(void)
From: Chris Mi <[email protected]>
[ Upstream commit 88bbd7b2369aca4598eb8f38c5f16be98c3bb5d4 ]
Free the offload sample action on error.
Fixes: f94d6389f6a8 ("net/mlx5e: TC, Add support to offload sample action")
Signed-off-by: Chris Mi <[email protected]>
Reviewed-by: Oz Shlomo <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/esw/sample.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/sample.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/sample.c
index 794012c5c476..d3ad78aa9d45 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/sample.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/sample.c
@@ -501,6 +501,7 @@ err_sampler:
err_offload_rule:
mlx5_esw_vporttbl_put(esw, &per_vport_tbl_attr);
err_default_tbl:
+ kfree(sample_flow);
return ERR_PTR(err);
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 5126da7d99cf6396c929f3b577ba3aed1e74acd7 ]
'watermarks_table' must be freed instead 'clocks_table', because
'clocks_table' is known to be NULL at this point and 'watermarks_table' is
never freed if the last kzalloc fails.
Fixes: c98ee89736b8 ("drm/amd/pm: add the fine grain tuning function for vangogh")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
index 77f532a49e37..bacef9120b8d 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
@@ -242,7 +242,7 @@ static int vangogh_tables_init(struct smu_context *smu)
return 0;
err3_out:
- kfree(smu_table->clocks_table);
+ kfree(smu_table->watermarks_table);
err2_out:
kfree(smu_table->gpu_metrics_table);
err1_out:
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit 164844135a3f215d3018ee9d6875336beb942413 ]
Currently ksz8_port_vlan_filtering() sets or clears the VLAN Enable
hardware flag. That controls discarding of packets with a VID that
has not been enabled for any port on the switch.
Since it is a global flag, set the dsa_switch::vlan_filtering_is_global
flag so that the DSA core understands this can't be controlled per
port.
When VLAN filtering is enabled, the switch should also discard packets
with a VID that's not enabled on the ingress port. Set or clear each
external port's VLAN Ingress Filter flag in ksz8_port_vlan_filtering()
to make that happen.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 4bd735c5183c..8e2a8103d590 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1078,8 +1078,14 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
if (ksz_is_ksz88x3(dev))
return -ENOTSUPP;
+ /* Discard packets with VID not enabled on the switch */
ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+ /* Discard packets with VID not enabled on the ingress port */
+ for (port = 0; port < dev->phy_port_cnt; ++port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER,
+ flag);
+
return 0;
}
@@ -1662,6 +1668,11 @@ static int ksz8_switch_init(struct ksz_device *dev)
*/
dev->ds->untag_bridge_pvid = true;
+ /* VLAN filtering is partly controlled by the global VLAN
+ * Enable flag
+ */
+ dev->ds->vlan_filtering_is_global = true;
+
return 0;
}
--
2.30.2
From: Robin Gögge <[email protected]>
[ Upstream commit 78d14bda861dd2729f15bb438fe355b48514bfe0 ]
This patch fixes the probe for BPF_PROG_TYPE_CGROUP_SOCKOPT,
so the probe reports accurate results when used by e.g.
bpftool.
Fixes: 4cdbfb59c44a ("libbpf: support sockopt hooks")
Signed-off-by: Robin Gögge <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf_probes.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/libbpf_probes.c b/tools/lib/bpf/libbpf_probes.c
index ecaae2927ab8..cd8c703dde71 100644
--- a/tools/lib/bpf/libbpf_probes.c
+++ b/tools/lib/bpf/libbpf_probes.c
@@ -75,6 +75,9 @@ probe_load(enum bpf_prog_type prog_type, const struct bpf_insn *insns,
case BPF_PROG_TYPE_CGROUP_SOCK_ADDR:
xattr.expected_attach_type = BPF_CGROUP_INET4_CONNECT;
break;
+ case BPF_PROG_TYPE_CGROUP_SOCKOPT:
+ xattr.expected_attach_type = BPF_CGROUP_GETSOCKOPT;
+ break;
case BPF_PROG_TYPE_SK_LOOKUP:
xattr.expected_attach_type = BPF_SK_LOOKUP;
break;
@@ -104,7 +107,6 @@ probe_load(enum bpf_prog_type prog_type, const struct bpf_insn *insns,
case BPF_PROG_TYPE_SK_REUSEPORT:
case BPF_PROG_TYPE_FLOW_DISSECTOR:
case BPF_PROG_TYPE_CGROUP_SYSCTL:
- case BPF_PROG_TYPE_CGROUP_SOCKOPT:
case BPF_PROG_TYPE_TRACING:
case BPF_PROG_TYPE_STRUCT_OPS:
case BPF_PROG_TYPE_EXT:
--
2.30.2
From: Aya Levin <[email protected]>
[ Upstream commit bd37c2888ccaa5ceb9895718f6909b247cc372e0 ]
Check return value of mlx5_fw_tracer_start(), set error path and fix
return value of mlx5_fw_tracer_init() accordingly.
Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
index 01a1d02dcf15..3f8a98093f8c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
@@ -1019,12 +1019,19 @@ int mlx5_fw_tracer_init(struct mlx5_fw_tracer *tracer)
MLX5_NB_INIT(&tracer->nb, fw_tracer_event, DEVICE_TRACER);
mlx5_eq_notifier_register(dev, &tracer->nb);
- mlx5_fw_tracer_start(tracer);
-
+ err = mlx5_fw_tracer_start(tracer);
+ if (err) {
+ mlx5_core_warn(dev, "FWTracer: Failed to start tracer %d\n", err);
+ goto err_notifier_unregister;
+ }
return 0;
+err_notifier_unregister:
+ mlx5_eq_notifier_unregister(dev, &tracer->nb);
+ mlx5_core_destroy_mkey(dev, &tracer->buff.mkey);
err_dealloc_pd:
mlx5_core_dealloc_pd(dev, tracer->buff.pdn);
+ cancel_work_sync(&tracer->read_fw_strings_work);
return err;
}
--
2.30.2
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 5b94046efb4706b3429c9c8e7377bd8d1621d588 ]
Distro versions of GRUB replace the usual LoadImage/StartImage calls
used to load the kernel image with some local code that fails to honor
the allocation requirements described in the PE/COFF header, as it
does not account for the image's BSS section at all: it fails to
allocate space for it, and fails to zero initialize it.
Since the EFI stub itself is allocated in the .init segment, which is
in the middle of the image, its BSS section is not impacted by this,
and the main consequence of this omission is that the BSS section may
overlap with memory regions that are already used by the firmware.
So let's warn about this condition, and force image reallocation to
occur in this case, which works around the problem.
Fixes: 82046702e288 ("efi/libstub/arm64: Replace 'preferred' offset with alignment check")
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/libstub/arm64-stub.c | 49 ++++++++++++++++++++++-
1 file changed, 48 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
index 7bf0a7acae5e..3698c1ce2940 100644
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -34,6 +34,51 @@ efi_status_t check_platform_features(void)
return EFI_SUCCESS;
}
+/*
+ * Distro versions of GRUB may ignore the BSS allocation entirely (i.e., fail
+ * to provide space, and fail to zero it). Check for this condition by double
+ * checking that the first and the last byte of the image are covered by the
+ * same EFI memory map entry.
+ */
+static bool check_image_region(u64 base, u64 size)
+{
+ unsigned long map_size, desc_size, buff_size;
+ efi_memory_desc_t *memory_map;
+ struct efi_boot_memmap map;
+ efi_status_t status;
+ bool ret = false;
+ int map_offset;
+
+ map.map = &memory_map;
+ map.map_size = &map_size;
+ map.desc_size = &desc_size;
+ map.desc_ver = NULL;
+ map.key_ptr = NULL;
+ map.buff_size = &buff_size;
+
+ status = efi_get_memory_map(&map);
+ if (status != EFI_SUCCESS)
+ return false;
+
+ for (map_offset = 0; map_offset < map_size; map_offset += desc_size) {
+ efi_memory_desc_t *md = (void *)memory_map + map_offset;
+ u64 end = md->phys_addr + md->num_pages * EFI_PAGE_SIZE;
+
+ /*
+ * Find the region that covers base, and return whether
+ * it covers base+size bytes.
+ */
+ if (base >= md->phys_addr && base < end) {
+ ret = (base + size) <= end;
+ break;
+ }
+ }
+
+ efi_bs_call(free_pool, memory_map);
+
+ return ret;
+}
+
/*
* Although relocatable kernels can fix up the misalignment with respect to
* MIN_KIMG_ALIGN, the resulting virtual text addresses are subtly out of
@@ -92,7 +137,9 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
}
if (status != EFI_SUCCESS) {
- if (IS_ALIGNED((u64)_text, min_kimg_align())) {
+ if (!check_image_region((u64)_text, kernel_memsize)) {
+ efi_err("FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region\n");
+ } else if (IS_ALIGNED((u64)_text, min_kimg_align())) {
/*
* Just execute from wherever we were loaded by the
* UEFI PE/COFF loader if the alignment is suitable.
--
2.30.2
From: Maximilian Heyne <[email protected]>
[ Upstream commit 88ca2521bd5b4e8b83743c01a2d4cb09325b51e9 ]
There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq
mapping are lazily allocated in this function. The check whether the row
is already present and the row initialization is not synchronized. Two
threads can at the same time allocate a new row for evtchn_to_irq and
add the irq mapping to the their newly allocated row. One thread will
overwrite what the other has set for evtchn_to_irq[row] and therefore
the irq mapping is lost. This will trigger a BUG_ON later in
bind_evtchn_to_cpu:
INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802
INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002)
INFO: nvme nvme77: 1/0/0 default/read/poll queues
CRIT: kernel BUG at drivers/xen/events/events_base.c:427!
WARN: invalid opcode: 0000 [#1] SMP NOPTI
WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme]
WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0
WARN: Call Trace:
WARN: set_affinity_irq+0x121/0x150
WARN: irq_do_set_affinity+0x37/0xe0
WARN: irq_setup_affinity+0xf6/0x170
WARN: irq_startup+0x64/0xe0
WARN: __setup_irq+0x69e/0x740
WARN: ? request_threaded_irq+0xad/0x160
WARN: request_threaded_irq+0xf5/0x160
WARN: ? nvme_timeout+0x2f0/0x2f0 [nvme]
WARN: pci_request_irq+0xa9/0xf0
WARN: ? pci_alloc_irq_vectors_affinity+0xbb/0x130
WARN: queue_request_irq+0x4c/0x70 [nvme]
WARN: nvme_reset_work+0x82d/0x1550 [nvme]
WARN: ? check_preempt_wakeup+0x14f/0x230
WARN: ? check_preempt_curr+0x29/0x80
WARN: ? nvme_irq_check+0x30/0x30 [nvme]
WARN: process_one_work+0x18e/0x3c0
WARN: worker_thread+0x30/0x3a0
WARN: ? process_one_work+0x3c0/0x3c0
WARN: kthread+0x113/0x130
WARN: ? kthread_park+0x90/0x90
WARN: ret_from_fork+0x3a/0x50
This patch sets evtchn_to_irq rows via a cmpxchg operation so that they
will be set only once. The row is now cleared before writing it to
evtchn_to_irq in order to not create a race once the row is visible for
other threads.
While at it, do not require the page to be zeroed, because it will be
overwritten with -1's in clear_evtchn_to_irq_row anyway.
Signed-off-by: Maximilian Heyne <[email protected]>
Fixes: d0b075ffeede ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/events/events_base.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index d7e361fb0548..0e44098f3977 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -198,12 +198,12 @@ static void disable_dynirq(struct irq_data *data);
static DEFINE_PER_CPU(unsigned int, irq_epoch);
-static void clear_evtchn_to_irq_row(unsigned row)
+static void clear_evtchn_to_irq_row(int *evtchn_row)
{
unsigned col;
for (col = 0; col < EVTCHN_PER_ROW; col++)
- WRITE_ONCE(evtchn_to_irq[row][col], -1);
+ WRITE_ONCE(evtchn_row[col], -1);
}
static void clear_evtchn_to_irq_all(void)
@@ -213,7 +213,7 @@ static void clear_evtchn_to_irq_all(void)
for (row = 0; row < EVTCHN_ROW(xen_evtchn_max_channels()); row++) {
if (evtchn_to_irq[row] == NULL)
continue;
- clear_evtchn_to_irq_row(row);
+ clear_evtchn_to_irq_row(evtchn_to_irq[row]);
}
}
@@ -221,6 +221,7 @@ static int set_evtchn_to_irq(evtchn_port_t evtchn, unsigned int irq)
{
unsigned row;
unsigned col;
+ int *evtchn_row;
if (evtchn >= xen_evtchn_max_channels())
return -EINVAL;
@@ -233,11 +234,18 @@ static int set_evtchn_to_irq(evtchn_port_t evtchn, unsigned int irq)
if (irq == -1)
return 0;
- evtchn_to_irq[row] = (int *)get_zeroed_page(GFP_KERNEL);
- if (evtchn_to_irq[row] == NULL)
+ evtchn_row = (int *) __get_free_pages(GFP_KERNEL, 0);
+ if (evtchn_row == NULL)
return -ENOMEM;
- clear_evtchn_to_irq_row(row);
+ clear_evtchn_to_irq_row(evtchn_row);
+
+ /*
+ * We've prepared an empty row for the mapping. If a different
+ * thread was faster inserting it, we can drop ours.
+ */
+ if (cmpxchg(&evtchn_to_irq[row], NULL, evtchn_row) != NULL)
+ free_page((unsigned long) evtchn_row);
}
WRITE_ONCE(evtchn_to_irq[row][col], irq);
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit ff363f480e5997051dd1de949121ffda3b753741 upstream.
The X86 MSI mechanism cannot handle interrupt affinity changes safely after
startup other than from an interrupt handler, unless interrupt remapping is
enabled. The startup sequence in the generic interrupt code violates that
assumption.
Mark the irq chips with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that
the default interrupt setting happens before the interrupt is started up
for the first time.
While the interrupt remapping MSI chip does not require this, there is no
point in treating it differently as this might spare an interrupt to a CPU
which is not in the default affinity mask.
For the non-remapping case go to the direct write path when the interrupt
is not yet started similar to the not yet activated case.
Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/apic/msi.c | 11 ++++++++---
arch/x86/kernel/hpet.c | 2 +-
2 files changed, 9 insertions(+), 4 deletions(-)
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -58,11 +58,13 @@ msi_set_affinity(struct irq_data *irqd,
* The quirk bit is not set in this case.
* - The new vector is the same as the old vector
* - The old vector is MANAGED_IRQ_SHUTDOWN_VECTOR (interrupt starts up)
+ * - The interrupt is not yet started up
* - The new destination CPU is the same as the old destination CPU
*/
if (!irqd_msi_nomask_quirk(irqd) ||
cfg->vector == old_cfg.vector ||
old_cfg.vector == MANAGED_IRQ_SHUTDOWN_VECTOR ||
+ !irqd_is_started(irqd) ||
cfg->dest_apicid == old_cfg.dest_apicid) {
irq_msi_update_msg(irqd, cfg);
return ret;
@@ -150,7 +152,8 @@ static struct irq_chip pci_msi_controlle
.irq_ack = irq_chip_ack_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_affinity = msi_set_affinity,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .flags = IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_AFFINITY_PRE_STARTUP,
};
int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
@@ -219,7 +222,8 @@ static struct irq_chip pci_msi_ir_contro
.irq_mask = pci_msi_mask_irq,
.irq_ack = irq_chip_ack_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .flags = IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_AFFINITY_PRE_STARTUP,
};
static struct msi_domain_info pci_msi_ir_domain_info = {
@@ -273,7 +277,8 @@ static struct irq_chip dmar_msi_controll
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_compose_msi_msg = dmar_msi_compose_msg,
.irq_write_msi_msg = dmar_msi_write_msg,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .flags = IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_AFFINITY_PRE_STARTUP,
};
static int dmar_msi_init(struct irq_domain *domain,
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -508,7 +508,7 @@ static struct irq_chip hpet_msi_controll
.irq_set_affinity = msi_domain_set_affinity,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_write_msi_msg = hpet_msi_write_msg,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_AFFINITY_PRE_STARTUP,
};
static int hpet_msi_init(struct irq_domain *domain,
From: Daniel Xu <[email protected]>
[ Upstream commit c34c338a40e4f3b6f80889cd17fd9281784d1c32 ]
Before this patch, btf_new() was liable to close an arbitrary FD 0 if
BTF parsing failed. This was because:
* btf->fd was initialized to 0 through the calloc()
* btf__free() (in the `done` label) closed any FDs >= 0
* btf->fd is left at 0 if parsing fails
This issue was discovered on a system using libbpf v0.3 (without
BTF_KIND_FLOAT support) but with a kernel that had BTF_KIND_FLOAT types
in BTF. Thus, parsing fails.
While this patch technically doesn't fix any issues b/c upstream libbpf
has BTF_KIND_FLOAT support, it'll help prevent issues in the future if
more BTF types are added. It also allow the fix to be backported to
older libbpf's.
Fixes: 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Daniel Xu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/5969bb991adedb03c6ae93e051fd2a00d293cf25.1627513670.git.dxu@dxuuu.xyz
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index d57e13a13798..1d9e5b35524c 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -805,6 +805,7 @@ static struct btf *btf_new(const void *data, __u32 size, struct btf *base_btf)
btf->nr_types = 0;
btf->start_id = 1;
btf->start_str_off = 0;
+ btf->fd = -1;
if (base_btf) {
btf->base_btf = base_btf;
@@ -833,8 +834,6 @@ static struct btf *btf_new(const void *data, __u32 size, struct btf *base_btf)
if (err)
goto done;
- btf->fd = -1;
-
done:
if (err) {
btf__free(btf);
--
2.30.2
From: DENG Qingfang <[email protected]>
[ Upstream commit aff51c5da3208bd164381e1488998667269c6cf4 ]
Add the missing RxUnicast counter.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mt7530.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9b90f3d3a8f5..167c599a81a5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -46,6 +46,7 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(2, 0x48, "TxBytes"),
MIB_DESC(1, 0x60, "RxDrop"),
MIB_DESC(1, 0x64, "RxFiltering"),
+ MIB_DESC(1, 0x68, "RxUnicast"),
MIB_DESC(1, 0x6c, "RxMulticast"),
MIB_DESC(1, 0x70, "RxBroadcast"),
MIB_DESC(1, 0x74, "RxAlignErr"),
--
2.30.2
From: Yonghong Song <[email protected]>
[ Upstream commit a2baf4e8bb0f306fbed7b5e6197c02896a638ab5 ]
Commit b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage()
helper") fixed a bug for bpf_get_local_storage() helper so different tasks
won't mess up with each other's percpu local storage.
The percpu data contains 8 slots so it can hold up to 8 contexts (same or
different tasks), for 8 different program runs, at the same time. This in
general is sufficient. But our internal testing showed the following warning
multiple times:
[...]
warning: WARNING: CPU: 13 PID: 41661 at include/linux/bpf-cgroup.h:193
__cgroup_bpf_run_filter_sock_ops+0x13e/0x180
RIP: 0010:__cgroup_bpf_run_filter_sock_ops+0x13e/0x180
<IRQ>
tcp_call_bpf.constprop.99+0x93/0xc0
tcp_conn_request+0x41e/0xa50
? tcp_rcv_state_process+0x203/0xe00
tcp_rcv_state_process+0x203/0xe00
? sk_filter_trim_cap+0xbc/0x210
? tcp_v6_inbound_md5_hash.constprop.41+0x44/0x160
tcp_v6_do_rcv+0x181/0x3e0
tcp_v6_rcv+0xc65/0xcb0
ip6_protocol_deliver_rcu+0xbd/0x450
ip6_input_finish+0x11/0x20
ip6_input+0xb5/0xc0
ip6_sublist_rcv_finish+0x37/0x50
ip6_sublist_rcv+0x1dc/0x270
ipv6_list_rcv+0x113/0x140
__netif_receive_skb_list_core+0x1a0/0x210
netif_receive_skb_list_internal+0x186/0x2a0
gro_normal_list.part.170+0x19/0x40
napi_complete_done+0x65/0x150
mlx5e_napi_poll+0x1ae/0x680
__napi_poll+0x25/0x120
net_rx_action+0x11e/0x280
__do_softirq+0xbb/0x271
irq_exit_rcu+0x97/0xa0
common_interrupt+0x7f/0xa0
</IRQ>
asm_common_interrupt+0x1e/0x40
RIP: 0010:bpf_prog_1835a9241238291a_tw_egress+0x5/0xbac
? __cgroup_bpf_run_filter_skb+0x378/0x4e0
? do_softirq+0x34/0x70
? ip6_finish_output2+0x266/0x590
? ip6_finish_output+0x66/0xa0
? ip6_output+0x6c/0x130
? ip6_xmit+0x279/0x550
? ip6_dst_check+0x61/0xd0
[...]
Using drgn [0] to dump the percpu buffer contents showed that on this CPU
slot 0 is still available, but slots 1-7 are occupied and those tasks in
slots 1-7 mostly don't exist any more. So we might have issues in
bpf_cgroup_storage_unset().
Further debugging confirmed that there is a bug in bpf_cgroup_storage_unset().
Currently, it tries to unset "current" slot with searching from the start.
So the following sequence is possible:
1. A task is running and claims slot 0
2. Running BPF program is done, and it checked slot 0 has the "task"
and ready to reset it to NULL (not yet).
3. An interrupt happens, another BPF program runs and it claims slot 1
with the *same* task.
4. The unset() in interrupt context releases slot 0 since it matches "task".
5. Interrupt is done, the task in process context reset slot 0.
At the end, slot 1 is not reset and the same process can continue to occupy
slots 2-7 and finally, when the above step 1-5 is repeated again, step 3 BPF
program won't be able to claim an empty slot and a warning will be issued.
To fix the issue, for unset() function, we should traverse from the last slot
to the first. This way, the above issue can be avoided.
The same reverse traversal should also be done in bpf_get_local_storage() helper
itself. Otherwise, incorrect local storage may be returned to BPF program.
[0] https://github.com/osandov/drgn
Fixes: b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper")
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf-cgroup.h | 4 ++--
kernel/bpf/helpers.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h
index 8b77d08d4b47..6c9b10d82c80 100644
--- a/include/linux/bpf-cgroup.h
+++ b/include/linux/bpf-cgroup.h
@@ -201,8 +201,8 @@ static inline void bpf_cgroup_storage_unset(void)
{
int i;
- for (i = 0; i < BPF_CGROUP_STORAGE_NEST_MAX; i++) {
- if (unlikely(this_cpu_read(bpf_cgroup_storage_info[i].task) != current))
+ for (i = BPF_CGROUP_STORAGE_NEST_MAX - 1; i >= 0; i--) {
+ if (likely(this_cpu_read(bpf_cgroup_storage_info[i].task) != current))
continue;
this_cpu_write(bpf_cgroup_storage_info[i].task, NULL);
diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index a2f1f15ce432..728f1a0fb442 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -397,8 +397,8 @@ BPF_CALL_2(bpf_get_local_storage, struct bpf_map *, map, u64, flags)
void *ptr;
int i;
- for (i = 0; i < BPF_CGROUP_STORAGE_NEST_MAX; i++) {
- if (unlikely(this_cpu_read(bpf_cgroup_storage_info[i].task) != current))
+ for (i = BPF_CGROUP_STORAGE_NEST_MAX - 1; i >= 0; i--) {
+ if (likely(this_cpu_read(bpf_cgroup_storage_info[i].task) != current))
continue;
storage = this_cpu_read(bpf_cgroup_storage_info[i].storage[stype]);
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit b69dd5b3780a7298bd893816a09da751bc0636f7 ]
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/inetdevice.h | 2 +-
net/ipv4/igmp.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 53aa0343bf69..aaf4f1b4c277 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -41,7 +41,7 @@ struct in_device {
unsigned long mr_qri; /* Query Response Interval */
unsigned char mr_qrv; /* Query Robustness Variable */
unsigned char mr_gq_running;
- unsigned char mr_ifc_count;
+ u32 mr_ifc_count;
struct timer_list mr_gq_timer; /* general query timer */
struct timer_list mr_ifc_timer; /* interface change timer */
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index a51360087b19..00576bae183d 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -803,7 +803,7 @@ static void igmp_gq_timer_expire(struct timer_list *t)
static void igmp_ifc_timer_expire(struct timer_list *t)
{
struct in_device *in_dev = from_timer(in_dev, t, mr_ifc_timer);
- u8 mr_ifc_count;
+ u32 mr_ifc_count;
igmpv3_send_cr(in_dev);
restart:
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit c34f674c8875235725c3ef86147a627f165d23b4 ]
ksz_read64() currently does some dubious byte-swapping on the two
halves of a 64-bit register, and then only returns the high bits.
Replace this with a straightforward expression.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz_common.h | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 2e6bfd333f50..6afbb41ad39e 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -205,12 +205,8 @@ static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val)
int ret;
ret = regmap_bulk_read(dev->regmap[2], reg, value, 2);
- if (!ret) {
- /* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */
- value[0] = swab32(value[0]);
- value[1] = swab32(value[1]);
- *val = swab64((u64)*value);
- }
+ if (!ret)
+ *val = (u64)value[0] << 32 | value[1];
return ret;
}
--
2.30.2
From: Takeshi Misawa <[email protected]>
[ Upstream commit 1090340f7ee53e824fd4eef66a4855d548110c5b ]
If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked.
Fix this, by freeing sk_receive_queue in sk->sk_destruct().
syzbot report:
BUG: memory leak
unreferenced object 0xffff88810f644600 (size 232):
comm "softirq", pid 0, jiffies 4294967032 (age 81.270s)
hex dump (first 32 bytes):
10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K.....
00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K.....
backtrace:
[<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496
[<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline]
[<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070
[<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384
[<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498
[<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline]
[<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662
[<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline]
[<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline]
[<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline]
[<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284
[<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35
[<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557
[<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345
[<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline]
[<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235
[<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198
[<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline]
[<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline]
[<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221
[<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295
[<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674
[<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977
[<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline]
[<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline]
[<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985
Fixes: 9ec767160357 ("net: add IEEE 802.15.4 socket family implementation")
Reported-and-tested-by: [email protected]
Signed-off-by: Takeshi Misawa <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ieee802154/socket.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c
index a45a0401adc5..c25f7617770c 100644
--- a/net/ieee802154/socket.c
+++ b/net/ieee802154/socket.c
@@ -984,6 +984,11 @@ static const struct proto_ops ieee802154_dgram_ops = {
.sendpage = sock_no_sendpage,
};
+static void ieee802154_sock_destruct(struct sock *sk)
+{
+ skb_queue_purge(&sk->sk_receive_queue);
+}
+
/* Create a socket. Initialise the socket, blank the addresses
* set the state.
*/
@@ -1024,7 +1029,7 @@ static int ieee802154_create(struct net *net, struct socket *sock,
sock->ops = ops;
sock_init_data(sock, sk);
- /* FIXME: sk->sk_destruct */
+ sk->sk_destruct = ieee802154_sock_destruct;
sk->sk_family = PF_IEEE802154;
/* Checksums on by default */
--
2.30.2
From: Pu Lehui <[email protected]>
[ Upstream commit 43e8f76006592cb1573a959aa287c45421066f9c ]
When using kprobe on powerpc booke series processor, Oops happens
as show bellow:
/ # echo "p:myprobe do_nanosleep" > /sys/kernel/debug/tracing/kprobe_events
/ # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
/ # sleep 1
[ 50.076730] Oops: Exception in kernel mode, sig: 5 [#1]
[ 50.077017] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500
[ 50.077221] Modules linked in:
[ 50.077462] CPU: 0 PID: 77 Comm: sleep Not tainted 5.14.0-rc4-00022-g251a1524293d #21
[ 50.077887] NIP: c0b9c4e0 LR: c00ebecc CTR: 00000000
[ 50.078067] REGS: c3883de0 TRAP: 0700 Not tainted (5.14.0-rc4-00022-g251a1524293d)
[ 50.078349] MSR: 00029000 <CE,EE,ME> CR: 24000228 XER: 20000000
[ 50.078675]
[ 50.078675] GPR00: c00ebdf0 c3883e90 c313e300 c3883ea0 00000001 00000000 c3883ecc 00000001
[ 50.078675] GPR08: c100598c c00ea250 00000004 00000000 24000222 102490c2 bff4180c 101e60d4
[ 50.078675] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000
[ 50.078675] GPR24: 00000002 00000000 c3883ea0 00000001 00000000 0000c350 3b9b8d50 00000000
[ 50.080151] NIP [c0b9c4e0] do_nanosleep+0x0/0x190
[ 50.080352] LR [c00ebecc] hrtimer_nanosleep+0x14c/0x1e0
[ 50.080638] Call Trace:
[ 50.080801] [c3883e90] [c00ebdf0] hrtimer_nanosleep+0x70/0x1e0 (unreliable)
[ 50.081110] [c3883f00] [c00ec004] sys_nanosleep_time32+0xa4/0x110
[ 50.081336] [c3883f40] [c001509c] ret_from_syscall+0x0/0x28
[ 50.081541] --- interrupt: c00 at 0x100a4d08
[ 50.081749] NIP: 100a4d08 LR: 101b5234 CTR: 00000003
[ 50.081931] REGS: c3883f50 TRAP: 0c00 Not tainted (5.14.0-rc4-00022-g251a1524293d)
[ 50.082183] MSR: 0002f902 <CE,EE,PR,FP,ME> CR: 24000222 XER: 00000000
[ 50.082457]
[ 50.082457] GPR00: 000000a2 bf980040 1024b4d0 bf980084 bf980084 64000000 00555345 fefefeff
[ 50.082457] GPR08: 7f7f7f7f 101e0000 00000069 00000003 28000422 102490c2 bff4180c 101e60d4
[ 50.082457] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000
[ 50.082457] GPR24: 00000002 bf9803f4 10240000 00000000 00000000 100039e0 00000000 102444e8
[ 50.083789] NIP [100a4d08] 0x100a4d08
[ 50.083917] LR [101b5234] 0x101b5234
[ 50.084042] --- interrupt: c00
[ 50.084238] Instruction dump:
[ 50.084483] 4bfffc40 60000000 60000000 60000000 9421fff0 39400402 914200c0 38210010
[ 50.084841] 4bfffc20 00000000 00000000 00000000 <7fe00008> 7c0802a6 7c892378 93c10048
[ 50.085487] ---[ end trace f6fffe98e2fa8f3e ]---
[ 50.085678]
Trace/breakpoint trap
There is no real mode for booke arch and the MMU translation is
always on. The corresponding MSR_IS/MSR_DS bit in booke is used
to switch the address space, but not for real mode judgment.
Fixes: 21f8b2fa3ca5 ("powerpc/kprobes: Ignore traps that happened in real mode")
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/kprobes.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index e8c2a6373157..00fafc8b249e 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -276,7 +276,8 @@ int kprobe_handler(struct pt_regs *regs)
if (user_mode(regs))
return 0;
- if (!(regs->msr & MSR_IR) || !(regs->msr & MSR_DR))
+ if (!IS_ENABLED(CONFIG_BOOKE) &&
+ (!(regs->msr & MSR_IR) || !(regs->msr & MSR_DR)))
return 0;
/*
--
2.30.2
From: Ben Dai <[email protected]>
commit b9cc7d8a4656a6e815852c27ab50365009cb69c1 upstream.
When the interrupt interval is greater than 2 ^ PREDICTION_BUFFER_SIZE *
PREDICTION_FACTOR us and less than 1s, the calculated index will be greater
than the length of irqs->ema_time[]. Check the calculated index before
using it to prevent array overflow.
Fixes: 23aa3b9a6b7d ("genirq/timings: Encapsulate storing function")
Signed-off-by: Ben Dai <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/irq/timings.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/kernel/irq/timings.c
+++ b/kernel/irq/timings.c
@@ -453,6 +453,11 @@ static __always_inline void __irq_timing
*/
index = irq_timings_interval_index(interval);
+ if (index > PREDICTION_BUFFER_SIZE - 1) {
+ irqs->count = 0;
+ return;
+ }
+
/*
* Store the index as an element of the pattern in another
* circular array.
From: Thomas Gleixner <[email protected]>
commit 7d5ec3d3612396dc6d4b76366d20ab9fc06f399f upstream.
When MSI-X is enabled the ordering of calls is:
msix_map_region();
msix_setup_entries();
pci_msi_setup_msi_irqs();
msix_program_entries();
This has a few interesting issues:
1) msix_setup_entries() allocates the MSI descriptors and initializes them
except for the msi_desc:masked member which is left zero initialized.
2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets
up the MSI interrupts which ends up in pci_write_msi_msg() unless the
interrupt chip provides its own irq_write_msi_msg() function.
3) msix_program_entries() does not do what the name suggests. It solely
updates the entries array (if not NULL) and initializes the masked
member for each MSI descriptor by reading the hardware state and then
masks the entry.
Obviously this has some issues:
1) The uninitialized masked member of msi_desc prevents the enforcement
of masking the entry in pci_write_msi_msg() depending on the cached
masked bit. Aside of that half initialized data is a NONO in general
2) msix_program_entries() only ensures that the actually allocated entries
are masked. This is wrong as experimentation with crash testing and
crash kernel kexec has shown.
This limited testing unearthed that when the production kernel had more
entries in use and unmasked when it crashed and the crash kernel
allocated a smaller amount of entries, then a full scan of all entries
found unmasked entries which were in use in the production kernel.
This is obviously a device or emulation issue as the device reset
should mask all MSI-X table entries, but obviously that's just part
of the paper specification.
Cure this by:
1) Masking all table entries in hardware
2) Initializing msi_desc::masked in msix_setup_entries()
3) Removing the mask dance in msix_program_entries()
4) Renaming msix_program_entries() to msix_update_entries() to
reflect the purpose of that function.
As the masking of unused entries has never been done the Fixes tag refers
to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 45 +++++++++++++++++++++++++++------------------
1 file changed, 27 insertions(+), 18 deletions(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -691,6 +691,7 @@ static int msix_setup_entries(struct pci
{
struct irq_affinity_desc *curmsk, *masks = NULL;
struct msi_desc *entry;
+ void __iomem *addr;
int ret, i;
int vec_count = pci_msix_vec_count(dev);
@@ -711,6 +712,7 @@ static int msix_setup_entries(struct pci
entry->msi_attrib.is_msix = 1;
entry->msi_attrib.is_64 = 1;
+
if (entries)
entry->msi_attrib.entry_nr = entries[i].entry;
else
@@ -722,6 +724,10 @@ static int msix_setup_entries(struct pci
entry->msi_attrib.default_irq = dev->irq;
entry->mask_base = base;
+ addr = pci_msix_desc_addr(entry);
+ if (addr)
+ entry->masked = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL);
+
list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
if (masks)
curmsk++;
@@ -732,26 +738,25 @@ out:
return ret;
}
-static void msix_program_entries(struct pci_dev *dev,
- struct msix_entry *entries)
+static void msix_update_entries(struct pci_dev *dev, struct msix_entry *entries)
{
struct msi_desc *entry;
- int i = 0;
- void __iomem *desc_addr;
for_each_pci_msi_entry(entry, dev) {
- if (entries)
- entries[i++].vector = entry->irq;
+ if (entries) {
+ entries->vector = entry->irq;
+ entries++;
+ }
+ }
+}
- desc_addr = pci_msix_desc_addr(entry);
- if (desc_addr)
- entry->masked = readl(desc_addr +
- PCI_MSIX_ENTRY_VECTOR_CTRL);
- else
- entry->masked = 0;
+static void msix_mask_all(void __iomem *base, int tsize)
+{
+ u32 ctrl = PCI_MSIX_ENTRY_CTRL_MASKBIT;
+ int i;
- msix_mask_irq(entry, 1);
- }
+ for (i = 0; i < tsize; i++, base += PCI_MSIX_ENTRY_SIZE)
+ writel(ctrl, base + PCI_MSIX_ENTRY_VECTOR_CTRL);
}
/**
@@ -768,9 +773,9 @@ static void msix_program_entries(struct
static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
int nvec, struct irq_affinity *affd)
{
- int ret;
- u16 control;
void __iomem *base;
+ int ret, tsize;
+ u16 control;
/*
* Some devices require MSI-X to be enabled before the MSI-X
@@ -782,12 +787,16 @@ static int msix_capability_init(struct p
pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
/* Request & Map MSI-X table region */
- base = msix_map_region(dev, msix_table_size(control));
+ tsize = msix_table_size(control);
+ base = msix_map_region(dev, tsize);
if (!base) {
ret = -ENOMEM;
goto out_disable;
}
+ /* Ensure that all table entries are masked. */
+ msix_mask_all(base, tsize);
+
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
goto out_disable;
@@ -801,7 +810,7 @@ static int msix_capability_init(struct p
if (ret)
goto out_free;
- msix_program_entries(dev, entries);
+ msix_update_entries(dev, entries);
ret = populate_msi_sysfs(dev);
if (ret)
From: Leon Romanovsky <[email protected]>
[ Upstream commit c633e799641cf13960bd83189b4d5b1b2adb0d4e ]
Clean SF resources if mlx5 eth failed to initialize.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Leon Romanovsky <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 12 ++++--------
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h | 5 +++++
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 0d0f63a27aba..8c6d7f70e783 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1781,16 +1781,14 @@ static int __init init(void)
if (err)
goto err_sf;
-#ifdef CONFIG_MLX5_CORE_EN
err = mlx5e_init();
- if (err) {
- pci_unregister_driver(&mlx5_core_driver);
- goto err_debug;
- }
-#endif
+ if (err)
+ goto err_en;
return 0;
+err_en:
+ mlx5_sf_driver_unregister();
err_sf:
pci_unregister_driver(&mlx5_core_driver);
err_debug:
@@ -1800,9 +1798,7 @@ err_debug:
static void __exit cleanup(void)
{
-#ifdef CONFIG_MLX5_CORE_EN
mlx5e_cleanup();
-#endif
mlx5_sf_driver_unregister();
pci_unregister_driver(&mlx5_core_driver);
mlx5_unregister_debugfs();
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index a22b706eebd3..1824eb0b0e9a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -223,8 +223,13 @@ int mlx5_firmware_flash(struct mlx5_core_dev *dev, const struct firmware *fw,
int mlx5_fw_version_query(struct mlx5_core_dev *dev,
u32 *running_ver, u32 *stored_ver);
+#ifdef CONFIG_MLX5_CORE_EN
int mlx5e_init(void);
void mlx5e_cleanup(void);
+#else
+static inline int mlx5e_init(void){ return 0; }
+static inline void mlx5e_cleanup(void){}
+#endif
static inline bool mlx5_sriov_is_enabled(struct mlx5_core_dev *dev)
{
--
2.30.2
From: Vladimir Oltean <[email protected]>
[ Upstream commit cd391280bf4693ceddca8f19042cff42f98c1a89 ]
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Vladimir Oltean <[email protected]>
Acked-by: Kurt Kanzenbach <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/hirschmann/hellcreek.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 4d78219da253..50109218baad 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -912,6 +912,7 @@ static int hellcreek_fdb_dump(struct dsa_switch *ds, int port,
{
struct hellcreek *hellcreek = ds->priv;
u16 entries;
+ int ret = 0;
size_t i;
mutex_lock(&hellcreek->reg_lock);
@@ -944,12 +945,14 @@ static int hellcreek_fdb_dump(struct dsa_switch *ds, int port,
if (!(entry.portmask & BIT(port)))
continue;
- cb(entry.mac, 0, entry.is_static, data);
+ ret = cb(entry.mac, 0, entry.is_static, data);
+ if (ret)
+ break;
}
mutex_unlock(&hellcreek->reg_lock);
- return 0;
+ return ret;
}
static int hellcreek_vlan_filtering(struct dsa_switch *ds, int port,
--
2.30.2
From: Dhananjay Phadke <[email protected]>
[ Upstream commit bba676cc0b6122a74fa2e246f38a6b05c6f95b36 ]
Similar NULL deref was originally fixed by graceful teardown sequence -
https://lore.kernel.org/linux-i2c/[email protected]
After this, a tasklet was added to take care of FIFO full condition for large i2c
transaction.
https://lore.kernel.org/linux-arm-kernel/[email protected]/
This introduced regression, a new race condition between tasklet enabling
interrupts and client unreg teardown sequence.
Kill tasklet before unreg_slave() masks bits in IE_OFFSET.
Updated teardown sequence -
(1) disable_irq()
(2) Kill tasklet
(3) Mask event enable bits in control reg
(4) Erase slave address (avoid further writes to rx fifo)
(5) Flush tx and rx FIFOs
(6) Clear pending event (interrupt) bits in status reg
(7) Set client pointer to NULL
(8) enable_irq()
--
Unable to handle kernel read from unreadable memory at virtual address 0000000000000320
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000009212a000
[0000000000000320] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O
Hardware name: Overlake (DT)
pstate: 40400085 (nZcv daIf +PAN -UAO -TCO BTYPE=--)
pc : bcm_iproc_i2c_slave_isr+0x2b8/0x8e4
lr : bcm_iproc_i2c_slave_isr+0x1c8/0x8e4
sp : ffff800010003e70
x29: ffff800010003e80 x28: ffffda017acdc000
x27: ffffda017b0ae000 x26: ffff800010004000
x25: ffff800010000000 x24: ffffda017af4a168
x23: 0000000000000073 x22: 0000000000000000
x21: 0000000001400000 x20: 0000000001000000
x19: ffff06f09583f880 x18: 00000000fa83b2da
x17: 000000000000b67e x16: 0000000002edb2f3
x15: 00000000000002c7 x14: 00000000000002c7
x13: 0000000000000006 x12: 0000000000000033
x11: 0000000000000000 x10: 0000000001000000
x9 : 0000000003289312 x8 : 0000000003289311
x7 : 02d0cd03a303adbc x6 : 02d18e7f0a4dfc6c
x5 : 02edb2f33f76ea68 x4 : 00000000fa83b2da
x3 : ffffda017af43cd0 x2 : ffff800010003e74
x1 : 0000000001400000 x0 : 0000000000000000
Call trace:
bcm_iproc_i2c_slave_isr+0x2b8/0x8e4
bcm_iproc_i2c_isr+0x178/0x290
__handle_irq_event_percpu+0xd0/0x200
handle_irq_event+0x60/0x1a0
handle_fasteoi_irq+0x130/0x220
__handle_domain_irq+0x8c/0xcc
gic_handle_irq+0xc0/0x120
el1_irq+0xcc/0x180
finish_task_switch+0x100/0x1d8
__schedule+0x61c/0x7a0
schedule_idle+0x28/0x44
do_idle+0x254/0x28c
cpu_startup_entry+0x28/0x2c
rest_init+0xc4/0xd0
arch_call_rest_init+0x14/0x1c
start_kernel+0x33c/0x3b8
Code: f9423260 910013e2 11000509 b9047a69 (f9419009)
---[ end trace 4781455b2a7bec15 ]---
Fixes: 4d658451c9d6 ("i2c: iproc: handle rx fifo full interrupt")
Signed-off-by: Dhananjay Phadke <[email protected]>
Acked-by: Ray Jui <[email protected]>
Acked-by: Rayagonda Kokatanur <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-bcm-iproc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index cceaf69279a9..6304d1dd2dd6 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -1224,14 +1224,14 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
disable_irq(iproc_i2c->irq);
+ tasklet_kill(&iproc_i2c->slave_rx_tasklet);
+
/* disable all slave interrupts */
tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
tmp &= ~(IE_S_ALL_INTERRUPT_MASK <<
IE_S_ALL_INTERRUPT_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp);
- tasklet_kill(&iproc_i2c->slave_rx_tasklet);
-
/* Erase the slave address programmed */
tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit 9130c2d30c17846287b803a9803106318cbe5266 ]
On the CPU port, we can support both tagged and untagged VLANs at the
same time by doing any necessary untagging in software rather than
hardware. To enable that, keep the CPU port's Remove Tag flag cleared
and set the dsa_switch::untag_bridge_pvid flag.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 46ef5bc79cbd..4bd735c5183c 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1109,8 +1109,10 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
/* If a VLAN is added with untagged flag different from the
* port's Remove Tag flag, we need to change the latter.
* Ignore VID 0, which is always untagged.
+ * Ignore CPU port, which will always be tagged.
*/
- if (untagged != p->remove_tag && vlan->vid != 0) {
+ if (untagged != p->remove_tag && vlan->vid != 0 &&
+ port != dev->cpu_port) {
unsigned int vid;
/* Reject attempts to add a VLAN that requires the
@@ -1655,6 +1657,11 @@ static int ksz8_switch_init(struct ksz_device *dev)
/* set the real number of ports */
dev->ds->num_ports = dev->port_cnt;
+ /* We rely on software untagging on the CPU port, so that we
+ * can support both tagged and untagged VLANs
+ */
+ dev->ds->untag_bridge_pvid = true;
+
return 0;
}
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit af01754f9e3c553a2ee63b4693c79a3956e230ab ]
When a VLAN is deleted from a port, the flags in struct
switchdev_obj_port_vlan are always 0. ksz8_port_vlan_del() copies the
BRIDGE_VLAN_INFO_UNTAGGED flag to the port's Tag Removal flag, and
therefore always clears it.
In case there are multiple VLANs configured as untagged on this port -
which seems useless, but is allowed - deleting one of them changes the
remaining VLANs to be tagged.
It's only ever necessary to change this flag when a VLAN is added to
the port, so leave it unchanged in ksz8_port_vlan_del().
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index c20fb6edd420..46ef5bc79cbd 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1167,7 +1167,6 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
- bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
u16 data, pvid;
u8 fid, member, valid;
@@ -1178,8 +1177,6 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
pvid = pvid & 0xFFF;
- ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
-
ksz8_r_vlan_table(dev, vlan->vid, &data);
ksz8_from_vlan(dev, data, &fid, &member, &valid);
--
2.30.2
From: Vladimir Oltean <[email protected]>
[ Upstream commit 21b52fed928e96d2f75d2f6aa9eac7a4b0b55d22 ]
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 4b05a2424623..0aaf599119cd 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1625,7 +1625,9 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
/* We need to hide the dsa_8021q VLANs from the user. */
if (priv->vlan_state == SJA1105_VLAN_UNAWARE)
l2_lookup.vlanid = 0;
- cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
+ rc = cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
+ if (rc)
+ return rc;
}
return 0;
}
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit 4a2b285e7e103d4d6c6ed3e5052a0ff74a5d7f15 ]
Fix the data-race reported by syzbot [1]
Issue here is that igmp_ifc_timer_expire() can update in_dev->mr_ifc_count
while another change just occured from another context.
in_dev->mr_ifc_count is only 8bit wide, so the race had little
consequences.
[1]
BUG: KCSAN: data-race in igmp_ifc_event / igmp_ifc_timer_expire
write to 0xffff8881051e3062 of 1 bytes by task 12547 on cpu 0:
igmp_ifc_event+0x1d5/0x290 net/ipv4/igmp.c:821
igmp_group_added+0x462/0x490 net/ipv4/igmp.c:1356
____ip_mc_inc_group+0x3ff/0x500 net/ipv4/igmp.c:1461
__ip_mc_join_group+0x24d/0x2c0 net/ipv4/igmp.c:2199
ip_mc_join_group_ssm+0x20/0x30 net/ipv4/igmp.c:2218
do_ip_setsockopt net/ipv4/ip_sockglue.c:1285 [inline]
ip_setsockopt+0x1827/0x2a80 net/ipv4/ip_sockglue.c:1423
tcp_setsockopt+0x8c/0xa0 net/ipv4/tcp.c:3657
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3362
__sys_setsockopt+0x18f/0x200 net/socket.c:2159
__do_sys_setsockopt net/socket.c:2170 [inline]
__se_sys_setsockopt net/socket.c:2167 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2167
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff8881051e3062 of 1 bytes by interrupt on cpu 1:
igmp_ifc_timer_expire+0x706/0xa30 net/ipv4/igmp.c:808
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1419
expire_timers+0x135/0x250 kernel/time/timer.c:1464
__run_timers+0x358/0x420 kernel/time/timer.c:1732
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1745
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu+0x9a/0xb0 kernel/softirq.c:636
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1100
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
console_unlock+0x8e8/0xb30 kernel/printk/printk.c:2646
vprintk_emit+0x125/0x3d0 kernel/printk/printk.c:2174
vprintk_default+0x22/0x30 kernel/printk/printk.c:2185
vprintk+0x15a/0x170 kernel/printk/printk_safe.c:392
printk+0x62/0x87 kernel/printk/printk.c:2216
selinux_netlink_send+0x399/0x400 security/selinux/hooks.c:6041
security_netlink_send+0x42/0x90 security/security.c:2070
netlink_sendmsg+0x59e/0x7c0 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
___sys_sendmsg net/socket.c:2446 [inline]
__sys_sendmsg+0x1ed/0x270 net/socket.c:2475
__do_sys_sendmsg net/socket.c:2484 [inline]
__se_sys_sendmsg net/socket.c:2482 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2482
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x01 -> 0x02
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 12539 Comm: syz-executor.1 Not tainted 5.14.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/igmp.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 6b3c558a4f23..a51360087b19 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -803,10 +803,17 @@ static void igmp_gq_timer_expire(struct timer_list *t)
static void igmp_ifc_timer_expire(struct timer_list *t)
{
struct in_device *in_dev = from_timer(in_dev, t, mr_ifc_timer);
+ u8 mr_ifc_count;
igmpv3_send_cr(in_dev);
- if (in_dev->mr_ifc_count) {
- in_dev->mr_ifc_count--;
+restart:
+ mr_ifc_count = READ_ONCE(in_dev->mr_ifc_count);
+
+ if (mr_ifc_count) {
+ if (cmpxchg(&in_dev->mr_ifc_count,
+ mr_ifc_count,
+ mr_ifc_count - 1) != mr_ifc_count)
+ goto restart;
igmp_ifc_start_timer(in_dev,
unsolicited_report_interval(in_dev));
}
@@ -818,7 +825,7 @@ static void igmp_ifc_event(struct in_device *in_dev)
struct net *net = dev_net(in_dev->dev);
if (IGMP_V1_SEEN(in_dev) || IGMP_V2_SEEN(in_dev))
return;
- in_dev->mr_ifc_count = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+ WRITE_ONCE(in_dev->mr_ifc_count, in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv);
igmp_ifc_start_timer(in_dev, 1);
}
@@ -957,7 +964,7 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
in_dev->mr_qri;
}
/* cancel the interface change timer */
- in_dev->mr_ifc_count = 0;
+ WRITE_ONCE(in_dev->mr_ifc_count, 0);
if (del_timer(&in_dev->mr_ifc_timer))
__in_dev_put(in_dev);
/* clear deleted report items */
@@ -1724,7 +1731,7 @@ void ip_mc_down(struct in_device *in_dev)
igmp_group_dropped(pmc);
#ifdef CONFIG_IP_MULTICAST
- in_dev->mr_ifc_count = 0;
+ WRITE_ONCE(in_dev->mr_ifc_count, 0);
if (del_timer(&in_dev->mr_ifc_timer))
__in_dev_put(in_dev);
in_dev->mr_gq_running = 0;
@@ -1941,7 +1948,7 @@ static int ip_mc_del_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
pmc->sfmode = MCAST_INCLUDE;
#ifdef CONFIG_IP_MULTICAST
pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
- in_dev->mr_ifc_count = pmc->crcount;
+ WRITE_ONCE(in_dev->mr_ifc_count, pmc->crcount);
for (psf = pmc->sources; psf; psf = psf->sf_next)
psf->sf_crcount = 0;
igmp_ifc_event(pmc->interface);
@@ -2120,7 +2127,7 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
/* else no filters; keep old mode for reports */
pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
- in_dev->mr_ifc_count = pmc->crcount;
+ WRITE_ONCE(in_dev->mr_ifc_count, pmc->crcount);
for (psf = pmc->sources; psf; psf = psf->sf_next)
psf->sf_crcount = 0;
igmp_ifc_event(in_dev);
--
2.30.2
From: Willy Tarreau <[email protected]>
[ Upstream commit 6922110d152e56d7569616b45a1f02876cf3eb9f ]
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).
It happens that the following happens:
- the network driver (e1000e here) prepares to suspend, calls e1000e_down()
which calls netif_carrier_off() to signal that the link is going down.
- netif_carrier_off() adds a link_watch event to the list of events for
this device
- the device is completely stopped.
- the machine suspends
- the cable is unplugged and the machine brought to another location
- the machine is resumed
- the queued linkwatch events are processed for the device
- the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
are silently dropped
- the device is resumed with its link down
- the upper VLAN and bond interfaces are never notified that the link had
been turned down and remain up
- the only way to provoke a change is to physically connect the machine
to a port and possibly unplug it.
The state after resume looks like this:
$ ip -br li | egrep 'bond|eth'
bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>
Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.
The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.
Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.
Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Florian Fainelli <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/link_watch.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index 75431ca9300f..1a455847da54 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -158,7 +158,7 @@ static void linkwatch_do_dev(struct net_device *dev)
clear_bit(__LINK_STATE_LINKWATCH_PENDING, &dev->state);
rfc2863_policy(dev);
- if (dev->flags & IFF_UP && netif_device_present(dev)) {
+ if (dev->flags & IFF_UP) {
if (netif_carrier_ok(dev))
dev_activate(dev);
else
@@ -204,7 +204,8 @@ static void __linkwatch_run_queue(int urgent_only)
dev = list_first_entry(&wrk, struct net_device, link_watch_list);
list_del_init(&dev->link_watch_list);
- if (urgent_only && !linkwatch_urgent_event(dev)) {
+ if (!netif_device_present(dev) ||
+ (urgent_only && !linkwatch_urgent_event(dev))) {
list_add_tail(&dev->link_watch_list, &lweventlist);
continue;
}
--
2.30.2
From: Christophe Leroy <[email protected]>
commit 62376365048878f770d8b7d11b89b8b3e18018f1 upstream.
When a DSI (Data Storage Interrupt) is taken while in NAP mode,
r11 doesn't survive the call to power_save_ppc32_restore().
So use r1 instead of r11 as they both contain the virtual stack
pointer at that point.
Fixes: 4c0104a83fc3 ("powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE")
Cc: [email protected] # v5.13+
Reported-by: Finn Thain <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/731694e0885271f6ee9ffc179eb4bcee78313682.1628003562.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/head_book3s_32.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -300,7 +300,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_HP
EXCEPTION_PROLOG_1
EXCEPTION_PROLOG_2 INTERRUPT_DATA_STORAGE DataAccess handle_dar_dsisr=1
prepare_transfer_to_handler
- lwz r5, _DSISR(r11)
+ lwz r5, _DSISR(r1)
andis. r0, r5, DSISR_DABRMATCH@h
bne- 1f
bl do_page_fault
From: Longpeng(Mike) <[email protected]>
[ Upstream commit 49b0b6ffe20c5344f4173f3436298782a08da4f2 ]
There's a potential deadlock case when remove the vsock device or
process the RESET event:
vsock_for_each_connected_socket:
spin_lock_bh(&vsock_table_lock) ----------- (1)
...
virtio_vsock_reset_sock:
lock_sock(sk) --------------------- (2)
...
spin_unlock_bh(&vsock_table_lock)
lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".
Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
Call trace:
queued_spin_lock_slowpath
vsock_remove_bound
vsock_remove_sock
virtio_transport_release
__vsock_release
vsock_release
__sock_release
sock_close
__fput
____fput
So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <[email protected]>
Signed-off-by: Longpeng(Mike) <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 2700a63ab095..3a056f8affd1 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -356,11 +356,14 @@ static void virtio_vsock_event_fill(struct virtio_vsock *vsock)
static void virtio_vsock_reset_sock(struct sock *sk)
{
- lock_sock(sk);
+ /* vmci_transport.c doesn't take sk_lock here either. At least we're
+ * under vsock_table_lock so the sock cannot disappear while we're
+ * executing.
+ */
+
sk->sk_state = TCP_CLOSE;
sk->sk_err = ECONNRESET;
sk->sk_error_report(sk);
- release_sock(sk);
}
static void virtio_vsock_update_guest_cid(struct virtio_vsock *vsock)
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit cddce01160582a5f52ada3da9626c052d852ec42 ]
There is a race between iterating over requests in
nbd_clear_que() and completing requests in recv_work(),
which can lead to double completion of a request.
To fix it, flush the recv worker before iterating over
the requests and don't abort the completed request
while iterating.
Fixes: 96d97e17828f ("nbd: clear_sock on netlink disconnect")
Reported-by: Jiang Yadong <[email protected]>
Signed-off-by: Xie Yongji <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/nbd.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 45d2c28c8fc8..1061894a55df 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -805,6 +805,10 @@ static bool nbd_clear_req(struct request *req, void *data, bool reserved)
{
struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req);
+ /* don't abort one completed request */
+ if (blk_mq_request_completed(req))
+ return true;
+
mutex_lock(&cmd->lock);
cmd->status = BLK_STS_IOERR;
mutex_unlock(&cmd->lock);
@@ -1973,15 +1977,19 @@ static void nbd_disconnect_and_put(struct nbd_device *nbd)
{
mutex_lock(&nbd->config_lock);
nbd_disconnect(nbd);
- nbd_clear_sock(nbd);
- mutex_unlock(&nbd->config_lock);
+ sock_shutdown(nbd);
/*
* Make sure recv thread has finished, so it does not drop the last
* config ref and try to destroy the workqueue from inside the work
- * queue.
+ * queue. And this also ensure that we can safely call nbd_clear_que()
+ * to cancel the inflight I/Os.
*/
if (nbd->recv_workq)
flush_workqueue(nbd->recv_workq);
+ nbd_clear_que(nbd);
+ nbd->task_setup = NULL;
+ mutex_unlock(&nbd->config_lock);
+
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF,
&nbd->config->runtime_flags))
nbd_config_put(nbd);
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit 8f4f58f88fe0d9bd591f21f53de7dbd42baeb3fa ]
The switches supported by ksz8795 only have a per-port flag for Tag
Removal. This means it is not possible to support both tagged and
untagged VLANs on the same port. Reject attempts to add a VLAN that
requires the flag to be changed, unless there are no VLANs currently
configured.
VID 0 is excluded from this check since it is untagged regardless of
the state of the flag.
On the CPU port we could support tagged and untagged VLANs at the same
time. This will be enabled by a later patch.
Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795.c | 27 +++++++++++++++++++++++++-
drivers/net/dsa/microchip/ksz_common.h | 1 +
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index bc9ca2b0e091..c20fb6edd420 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1099,13 +1099,38 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
+ struct ksz_port *p = &dev->ports[port];
u16 data, new_pvid = 0;
u8 fid, member, valid;
if (ksz_is_ksz88x3(dev))
return -ENOTSUPP;
- ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+ /* If a VLAN is added with untagged flag different from the
+ * port's Remove Tag flag, we need to change the latter.
+ * Ignore VID 0, which is always untagged.
+ */
+ if (untagged != p->remove_tag && vlan->vid != 0) {
+ unsigned int vid;
+
+ /* Reject attempts to add a VLAN that requires the
+ * Remove Tag flag to be changed, unless there are no
+ * other VLANs currently configured.
+ */
+ for (vid = 1; vid < dev->num_vlans; ++vid) {
+ /* Skip the VID we are going to add or reconfigure */
+ if (vid == vlan->vid)
+ continue;
+
+ ksz8_from_vlan(dev, dev->vlan_cache[vid].table[0],
+ &fid, &member, &valid);
+ if (valid && (member & BIT(port)))
+ return -EINVAL;
+ }
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+ p->remove_tag = untagged;
+ }
ksz8_r_vlan_table(dev, vlan->vid, &data);
ksz8_from_vlan(dev, data, &fid, &member, &valid);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 6afbb41ad39e..1597c63988b4 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -27,6 +27,7 @@ struct ksz_port_mib {
struct ksz_port {
u16 member;
u16 vid_member;
+ bool remove_tag; /* Remove Tag flag set, for ksz8795 only */
int stp_state;
struct phy_device phydev;
--
2.30.2
From: Zhen Lei <[email protected]>
commit 07d25971b220e477eb019fcb520a9f2e3ac966af upstream.
It's CONFIG_DEBUG_RT_MUTEXES not CONFIG_DEBUG_RT_MUTEX.
Fixes: f7efc4799f81 ("locking/rtmutex: Inline chainwalk depth check")
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Boqun Feng <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/locking/rtmutex.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -343,7 +343,7 @@ static __always_inline bool
rt_mutex_cond_detect_deadlock(struct rt_mutex_waiter *waiter,
enum rtmutex_chainwalk chwalk)
{
- if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEX))
+ if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES))
return waiter != NULL;
return chwalk == RT_MUTEX_FULL_CHAINWALK;
}
From: David Brazdil <[email protected]>
[ Upstream commit facee1be7689f8cf573b9ffee6a5c28ee193615e ]
Hyp checks whether an address range only covers RAM by checking the
start/endpoints against a list of memblock_region structs. However,
the endpoint here is exclusive but internally is treated as inclusive.
Fix the off-by-one error that caused valid address ranges to be
rejected.
Cc: Quentin Perret <[email protected]>
Fixes: 90134ac9cabb6 ("KVM: arm64: Protect the .hyp sections from the host")
Signed-off-by: David Brazdil <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kvm/hyp/nvhe/mem_protect.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index 4b60c0056c04..fa1b77fe629d 100644
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -190,7 +190,7 @@ static bool range_is_memory(u64 start, u64 end)
{
struct kvm_mem_range r1, r2;
- if (!find_mem_range(start, &r1) || !find_mem_range(end, &r2))
+ if (!find_mem_range(start, &r1) || !find_mem_range(end - 1, &r2))
return false;
if (r1.start != r2.start)
return false;
--
2.30.2
From: Bixuan Cui <[email protected]>
commit dbbc93576e03fbe24b365fab0e901eb442237a8a upstream.
msi_domain_alloc_irqs() invokes irq_domain_activate_irq(), but
msi_domain_free_irqs() does not enforce deactivation before tearing down
the interrupts.
This happens when PCI/MSI interrupts are set up and never used before being
torn down again, e.g. in error handling pathes. The only place which cleans
that up is the error handling path in msi_domain_alloc_irqs().
Move the cleanup from msi_domain_alloc_irqs() into msi_domain_free_irqs()
to cure that.
Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early")
Signed-off-by: Bixuan Cui <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/irq/msi.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/kernel/irq/msi.c
+++ b/kernel/irq/msi.c
@@ -476,11 +476,6 @@ skip_activate:
return 0;
cleanup:
- for_each_msi_vector(desc, i, dev) {
- irq_data = irq_domain_get_irq_data(domain, i);
- if (irqd_is_activated(irq_data))
- irq_domain_deactivate_irq(irq_data);
- }
msi_domain_free_irqs(domain, dev);
return ret;
}
@@ -505,7 +500,15 @@ int msi_domain_alloc_irqs(struct irq_dom
void __msi_domain_free_irqs(struct irq_domain *domain, struct device *dev)
{
+ struct irq_data *irq_data;
struct msi_desc *desc;
+ int i;
+
+ for_each_msi_vector(desc, i, dev) {
+ irq_data = irq_domain_get_irq_data(domain, i);
+ if (irqd_is_activated(irq_data))
+ irq_domain_deactivate_irq(irq_data);
+ }
for_each_msi_entry(desc, dev) {
/*
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit 45a687879b31caae4032abd1c2402e289d2b8083 ]
Ignore fdb flags when adding port extern learn entries and always set
BR_FDB_LOCAL flag when adding bridge extern learn entries. This is
closest to the behaviour we had before and avoids breaking any use cases
which were allowed.
This patch fixes iproute2 calls which assume NUD_PERMANENT and were
allowed before, example:
$ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn
Extern learn entries are allowed to roam, but do not expire, so static
or dynamic flags make no sense for them.
Also add a comment for future reference.
Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space")
Fixes: 0541a6293298 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry")
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/neighbour.h | 7 +++++--
net/bridge/br.c | 3 +--
net/bridge/br_fdb.c | 11 ++++-------
net/bridge/br_private.h | 2 +-
4 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h
index dc8b72201f6c..00a60695fa53 100644
--- a/include/uapi/linux/neighbour.h
+++ b/include/uapi/linux/neighbour.h
@@ -66,8 +66,11 @@ enum {
#define NUD_NONE 0x00
/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
- and make no address resolution or NUD.
- NUD_PERMANENT also cannot be deleted by garbage collectors.
+ * and make no address resolution or NUD.
+ * NUD_PERMANENT also cannot be deleted by garbage collectors.
+ * When NTF_EXT_LEARNED is set for a bridge fdb entry the different cache entry
+ * states don't make sense and thus are ignored. Such entries don't age and
+ * can roam.
*/
struct nda_cacheinfo {
diff --git a/net/bridge/br.c b/net/bridge/br.c
index bbab9984f24e..ef743f94254d 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -166,8 +166,7 @@ static int br_switchdev_event(struct notifier_block *unused,
case SWITCHDEV_FDB_ADD_TO_BRIDGE:
fdb_info = ptr;
err = br_fdb_external_learn_add(br, p, fdb_info->addr,
- fdb_info->vid,
- fdb_info->is_local, false);
+ fdb_info->vid, false);
if (err) {
err = notifier_from_errno(err);
break;
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 87ce52bba649..3451c888ff79 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -1026,10 +1026,7 @@ static int __br_fdb_add(struct ndmsg *ndm, struct net_bridge *br,
"FDB entry towards bridge must be permanent");
return -EINVAL;
}
-
- err = br_fdb_external_learn_add(br, p, addr, vid,
- ndm->ndm_state & NUD_PERMANENT,
- true);
+ err = br_fdb_external_learn_add(br, p, addr, vid, true);
} else {
spin_lock_bh(&br->hash_lock);
err = fdb_add_entry(br, p, addr, ndm, nlh_flags, vid, nfea_tb);
@@ -1257,7 +1254,7 @@ void br_fdb_unsync_static(struct net_bridge *br, struct net_bridge_port *p)
}
int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
- const unsigned char *addr, u16 vid, bool is_local,
+ const unsigned char *addr, u16 vid,
bool swdev_notify)
{
struct net_bridge_fdb_entry *fdb;
@@ -1275,7 +1272,7 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
if (swdev_notify)
flags |= BIT(BR_FDB_ADDED_BY_USER);
- if (is_local)
+ if (!p)
flags |= BIT(BR_FDB_LOCAL);
fdb = fdb_create(br, p, addr, vid, flags);
@@ -1304,7 +1301,7 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
if (swdev_notify)
set_bit(BR_FDB_ADDED_BY_USER, &fdb->flags);
- if (is_local)
+ if (!p)
set_bit(BR_FDB_LOCAL, &fdb->flags);
if (modified)
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 4e3d26e0a2d1..e013d33f1c7c 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -707,7 +707,7 @@ int br_fdb_get(struct sk_buff *skb, struct nlattr *tb[], struct net_device *dev,
int br_fdb_sync_static(struct net_bridge *br, struct net_bridge_port *p);
void br_fdb_unsync_static(struct net_bridge *br, struct net_bridge_port *p);
int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
- const unsigned char *addr, u16 vid, bool is_local,
+ const unsigned char *addr, u16 vid,
bool swdev_notify);
int br_fdb_external_learn_del(struct net_bridge *br, struct net_bridge_port *p,
const unsigned char *addr, u16 vid,
--
2.30.2
From: Vladimir Oltean <[email protected]>
[ Upstream commit ada2fee185d8145afb89056558bb59545b9dbdd0 ]
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: ab335349b852 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/lan9303-core.c | 34 +++++++++++++++++++---------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 344374025426..d7ce281570b5 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -557,12 +557,12 @@ static int lan9303_alr_make_entry_raw(struct lan9303 *chip, u32 dat0, u32 dat1)
return 0;
}
-typedef void alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1,
- int portmap, void *ctx);
+typedef int alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1,
+ int portmap, void *ctx);
-static void lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
+static int lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
{
- int i;
+ int ret = 0, i;
mutex_lock(&chip->alr_mutex);
lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
@@ -582,13 +582,17 @@ static void lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
LAN9303_ALR_DAT1_PORT_BITOFFS;
portmap = alrport_2_portmap[alrport];
- cb(chip, dat0, dat1, portmap, ctx);
+ ret = cb(chip, dat0, dat1, portmap, ctx);
+ if (ret)
+ break;
lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
LAN9303_ALR_CMD_GET_NEXT);
lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0);
}
mutex_unlock(&chip->alr_mutex);
+
+ return ret;
}
static void alr_reg_to_mac(u32 dat0, u32 dat1, u8 mac[6])
@@ -606,18 +610,20 @@ struct del_port_learned_ctx {
};
/* Clear learned (non-static) entry on given port */
-static void alr_loop_cb_del_port_learned(struct lan9303 *chip, u32 dat0,
- u32 dat1, int portmap, void *ctx)
+static int alr_loop_cb_del_port_learned(struct lan9303 *chip, u32 dat0,
+ u32 dat1, int portmap, void *ctx)
{
struct del_port_learned_ctx *del_ctx = ctx;
int port = del_ctx->port;
if (((BIT(port) & portmap) == 0) || (dat1 & LAN9303_ALR_DAT1_STATIC))
- return;
+ return 0;
/* learned entries has only one port, we can just delete */
dat1 &= ~LAN9303_ALR_DAT1_VALID; /* delete entry */
lan9303_alr_make_entry_raw(chip, dat0, dat1);
+
+ return 0;
}
struct port_fdb_dump_ctx {
@@ -626,19 +632,19 @@ struct port_fdb_dump_ctx {
dsa_fdb_dump_cb_t *cb;
};
-static void alr_loop_cb_fdb_port_dump(struct lan9303 *chip, u32 dat0,
- u32 dat1, int portmap, void *ctx)
+static int alr_loop_cb_fdb_port_dump(struct lan9303 *chip, u32 dat0,
+ u32 dat1, int portmap, void *ctx)
{
struct port_fdb_dump_ctx *dump_ctx = ctx;
u8 mac[ETH_ALEN];
bool is_static;
if ((BIT(dump_ctx->port) & portmap) == 0)
- return;
+ return 0;
alr_reg_to_mac(dat0, dat1, mac);
is_static = !!(dat1 & LAN9303_ALR_DAT1_STATIC);
- dump_ctx->cb(mac, 0, is_static, dump_ctx->data);
+ return dump_ctx->cb(mac, 0, is_static, dump_ctx->data);
}
/* Set a static ALR entry. Delete entry if port_map is zero */
@@ -1210,9 +1216,7 @@ static int lan9303_port_fdb_dump(struct dsa_switch *ds, int port,
};
dev_dbg(chip->dev, "%s(%d)\n", __func__, port);
- lan9303_alr_loop(chip, alr_loop_cb_fdb_port_dump, &dump_ctx);
-
- return 0;
+ return lan9303_alr_loop(chip, alr_loop_cb_fdb_port_dump, &dump_ctx);
}
static int lan9303_port_mdb_prepare(struct dsa_switch *ds, int port,
--
2.30.2
From: Andre Przywara <[email protected]>
[ Upstream commit d1dee814168538eba166ae4150b37f0d88257884 ]
When we are building all the various pinctrl structures for the
Allwinner pinctrl devices, we do some estimation about the maximum
number of distinct function (names) that we will need.
So far we take the number of pins as an upper bound, even though we
can actually have up to four special functions per pin. This wasn't a
problem until now, since we indeed have typically far more pins than
functions, and most pins share common functions.
However the H616 "-r" pin controller has only two pins, but four
functions, so we run over the end of the array when we are looking for
a matching function name in sunxi_pinctrl_add_function - there is no
NULL sentinel left that would terminate the loop:
[ 8.200648] Unable to handle kernel paging request at virtual address fffdff7efbefaff5
[ 8.209179] Mem abort info:
....
[ 8.368456] Call trace:
[ 8.370925] __pi_strcmp+0x90/0xf0
[ 8.374559] sun50i_h616_r_pinctrl_probe+0x1c/0x28
[ 8.379557] platform_probe+0x68/0xd8
Do an actual worst case allocation (4 functions per pin, three common
functions and the sentinel) for the initial array allocation. This is
now heavily overestimating the number of functions in the common case,
but we will reallocate this array later with the actual number of
functions, so it's only temporarily.
Fixes: 561c1cf17c46 ("pinctrl: sunxi: Add support for the Allwinner H616-R pin controller")
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index dc8d39ae045b..9c7679c06dca 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -1219,10 +1219,12 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
}
/*
- * We suppose that we won't have any more functions than pins,
- * we'll reallocate that later anyway
+ * Find an upper bound for the maximum number of functions: in
+ * the worst case we have gpio_in, gpio_out, irq and up to four
+ * special functions per pin, plus one entry for the sentinel.
+ * We'll reallocate that later anyway.
*/
- pctl->functions = kcalloc(pctl->ngroups,
+ pctl->functions = kcalloc(4 * pctl->ngroups + 4,
sizeof(*pctl->functions),
GFP_KERNEL);
if (!pctl->functions)
--
2.30.2
From: Christian Hewitt <[email protected]>
[ Upstream commit bf33677a3c394bb8fddd48d3bbc97adf0262e045 ]
Add support for the OSD1 HDR registers so meson DRM can handle the HDR
properties set by Amlogic u-boot on G12A and newer devices which result
in blue/green/pink colour distortion to display output.
This takes the original patch submissions from Mathias [0] and [1] with
corrections for formatting and the missing description and attribution
needed for merge.
[0] https://lore.kernel.org/linux-amlogic/[email protected]/T/
[1] https://lore.kernel.org/linux-amlogic/CAOKfEHBx_fboUqkENEMd-OC-NSrf46nto+vDLgvgttzPe99kXg@mail.gmail.com/T/#u
Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Suggested-by: Mathias Steiger <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
Tested-by: Neil Armstrong <[email protected]>
Tested-by: Philip Milev <[email protected]>
[narmsrong: adding missing space on second tested-by tag]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/meson_registers.h | 5 +++++
drivers/gpu/drm/meson/meson_viu.c | 7 ++++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 446e7961da48..0f3cafab8860 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -634,6 +634,11 @@
#define VPP_WRAP_OSD3_MATRIX_PRE_OFFSET2 0x3dbc
#define VPP_WRAP_OSD3_MATRIX_EN_CTRL 0x3dbd
+/* osd1 HDR */
+#define OSD1_HDR2_CTRL 0x38a0
+#define OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN BIT(13)
+#define OSD1_HDR2_CTRL_REG_ONLY_MAT BIT(16)
+
/* osd2 scaler */
#define OSD2_VSC_PHASE_STEP 0x3d00
#define OSD2_VSC_INI_PHASE 0x3d01
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index aede0c67a57f..259f3e6bec90 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -425,9 +425,14 @@ void meson_viu_init(struct meson_drm *priv)
if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL))
meson_viu_load_matrix(priv);
- else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+ else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
meson_viu_set_g12a_osd1_matrix(priv, RGB709_to_YUV709l_coeff,
true);
+ /* fix green/pink color distortion from vendor u-boot */
+ writel_bits_relaxed(OSD1_HDR2_CTRL_REG_ONLY_MAT |
+ OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN, 0,
+ priv->io_base + _REG(OSD1_HDR2_CTRL));
+ }
/* Initialize OSD1 fifo control register */
reg = VIU_OSD_DDR_PRIORITY_URGENT |
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 519133debcc19f5c834e7e28480b60bdc234fe02 ]
I got a memleak report:
BUG: memory leak
unreferenced object 0x607ee521a658 (size 240):
comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s)
hex dump (first 32 bytes, cpu 1):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693
[<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline]
[<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611
[<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline]
[<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487
[<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457
[<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550
[<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae
On error path of br_add_if(), p->mcast_stats allocated in
new_nbp() need be freed, or it will be leaked.
Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_if.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 6e4a32354a13..14cd6ef96111 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -616,6 +616,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev,
err = dev_set_allmulti(dev, 1);
if (err) {
+ br_multicast_del_port(p);
kfree(p); /* kobject not yet init'd, manually free */
goto err1;
}
@@ -729,6 +730,7 @@ err4:
err3:
sysfs_remove_link(br->ifobj, p->dev->name);
err2:
+ br_multicast_del_port(p);
kobject_put(&p->kobj);
dev_set_allmulti(dev, -1);
err1:
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 839ad22f755132838f406751439363c07272ad87 ]
Skip (omit) any version string info that is parenthesized.
Warning: objdump version 15) is older than 2.19
Warning: Skipping posttest.
where 'objdump -v' says:
GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18
Fixes: 8bee738bb1979 ("x86: Fix objdump version check in chkobjdump.awk for different formats.")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/tools/chkobjdump.awk | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk
index fd1ab80be0de..a4cf678cf5c8 100644
--- a/arch/x86/tools/chkobjdump.awk
+++ b/arch/x86/tools/chkobjdump.awk
@@ -10,6 +10,7 @@ BEGIN {
/^GNU objdump/ {
verstr = ""
+ gsub(/\(.*\)/, "");
for (i = 3; i <= NF; i++)
if (match($(i), "^[0-9]")) {
verstr = $(i);
--
2.30.2
From: Christophe Leroy <[email protected]>
commit 98694166c27d473c36b434bd3572934c2f2a16ab upstream.
An interrupt handler shall not be called from another interrupt
handler otherwise this leads to problems like the following:
Kernel attempted to write user page (afd4fa84) - exploit attempt? (uid: 1000)
------------[ cut here ]------------
Bug: Write fault blocked by KUAP!
WARNING: CPU: 0 PID: 1617 at arch/powerpc/mm/fault.c:230 do_page_fault+0x484/0x720
Modules linked in:
CPU: 0 PID: 1617 Comm: sshd Tainted: G W 5.13.0-pmac-00010-g8393422eb77 #7
NIP: c001b77c LR: c001b77c CTR: 00000000
REGS: cb9e5bc0 TRAP: 0700 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00021032 <ME,IR,DR,RI> CR: 24942424 XER: 00000000
GPR00: c001b77c cb9e5c80 c1582c00 00000021 3ffffbff 085b0000 00000027 c8eb644c
GPR08: 00000023 00000000 00000000 00000000 24942424 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 02000000 c1fda6c0 afd4fa84 00000300 cb9e5cc0
NIP [c001b77c] do_page_fault+0x484/0x720
LR [c001b77c] do_page_fault+0x484/0x720
Call Trace:
[cb9e5c80] [c001b77c] do_page_fault+0x484/0x720 (unreliable)
[cb9e5cb0] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at __copy_tofrom_user+0x110/0x20c
NIP: c001f9b4 LR: c03250a0 CTR: 00000004
REGS: cb9e5cc0 TRAP: 0300 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48028468 XER: 20000000
DAR: afd4fa84 DSISR: 0a000000
GPR00: 20726f6f cb9e5d80 c1582c00 00000004 cb9e5e3a 00000016 afd4fa80 00000000
GPR08: 3835202d 72777872 2d78722d 00000004 28028464 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 c07640c4 cb9e5e98 cb9e5e90
GPR24: 00000040 afd4fa96 00000040 cb9e5e0c 00000daa a0000000 cb9e5e98 afd4fa56
NIP [c001f9b4] __copy_tofrom_user+0x110/0x20c
LR [c03250a0] _copy_to_iter+0x144/0x990
--- interrupt: 300
[cb9e5d80] [c03e89c0] n_tty_read+0xa4/0x598 (unreliable)
[cb9e5df0] [c03e2a0c] tty_read+0xdc/0x2b4
[cb9e5e80] [c0156bf8] vfs_read+0x274/0x340
[cb9e5f00] [c01571ac] ksys_read+0x70/0x118
[cb9e5f30] [c0016048] ret_from_syscall+0x0/0x28
--- interrupt: c00 at 0xa7855c88
NIP: a7855c88 LR: a7855c5c CTR: 00000000
REGS: cb9e5f40 TRAP: 0c00 Tainted: G W (5.13.0-pmac-00010-g8393422eb77)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 2402446c XER: 00000000
GPR00: 00000003 afd4ec70 a72137d0 0000000b afd4ecac 00004000 0065a990 00000800
GPR08: 00000000 a7947930 00000000 00000004 c15831b0 0063f8c8 00000000 000186a0
GPR16: afd52dd4 afd52dd0 afd52dcc afd52dc8 0065a990 0065a9e0 00000001 0065fac0
GPR24: 00000000 00000089 00664050 00000000 00668e30 a720c8dc a7943ff4 0065f9b0
NIP [a7855c88] 0xa7855c88
LR [a7855c5c] 0xa7855c5c
--- interrupt: c00
Instruction dump:
3884aa88 38630178 48076861 807f0080 48042e45 2f830000 419e0148 3c80c079
3c60c076 38841be4 386301c0 4801f705 <0fe00000> 3860000b 4bfffe30 3c80c06b
---[ end trace fd69b91a8046c2e5 ]---
Here the problem is that by re-enterring an exception handler,
kuap_save_and_lock() is called a second time with this time KUAP
access locked, leading to regs->kuap being overwritten hence
KUAP not being unlocked at exception exit as expected.
Do not call do_IRQ() from timer_interrupt() directly. Instead,
redefine do_IRQ() as a standard function named __do_IRQ(), and
call it from both do_IRQ() and time_interrupt() handlers.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: [email protected] # v5.12+
Reported-by: Stan Johnson <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/c17d234f4927d39a1d7100864a8e1145323d33a0.1628611927.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/interrupt.h | 3 +++
arch/powerpc/include/asm/irq.h | 2 +-
arch/powerpc/kernel/irq.c | 7 ++++++-
arch/powerpc/kernel/time.c | 2 +-
4 files changed, 11 insertions(+), 3 deletions(-)
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -531,6 +531,9 @@ DECLARE_INTERRUPT_HANDLER_NMI(hmi_except
DECLARE_INTERRUPT_HANDLER_ASYNC(TAUException);
+/* irq.c */
+DECLARE_INTERRUPT_HANDLER_ASYNC(do_IRQ);
+
void __noreturn unrecoverable_exception(struct pt_regs *regs);
void replay_system_reset(void);
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -53,7 +53,7 @@ extern void *mcheckirq_ctx[NR_CPUS];
extern void *hardirq_ctx[NR_CPUS];
extern void *softirq_ctx[NR_CPUS];
-extern void do_IRQ(struct pt_regs *regs);
+void __do_IRQ(struct pt_regs *regs);
extern void __init init_IRQ(void);
extern void __do_irq(struct pt_regs *regs);
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -654,7 +654,7 @@ void __do_irq(struct pt_regs *regs)
trace_irq_exit(regs);
}
-DEFINE_INTERRUPT_HANDLER_ASYNC(do_IRQ)
+void __do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
void *cursp, *irqsp, *sirqsp;
@@ -678,6 +678,11 @@ DEFINE_INTERRUPT_HANDLER_ASYNC(do_IRQ)
set_irq_regs(old_regs);
}
+DEFINE_INTERRUPT_HANDLER_ASYNC(do_IRQ)
+{
+ __do_IRQ(regs);
+}
+
static void *__init alloc_vm_stack(void)
{
return __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, THREADINFO_GFP,
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -607,7 +607,7 @@ DEFINE_INTERRUPT_HANDLER_ASYNC(timer_int
#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
if (atomic_read(&ppc_n_lost_interrupts) != 0)
- do_IRQ(regs);
+ __do_IRQ(regs);
#endif
old_regs = set_irq_regs(regs);
From: Babu Moger <[email protected]>
commit 064855a69003c24bd6b473b367d364e418c57625 upstream.
Creating a new sub monitoring group in the root /sys/fs/resctrl leads to
getting the "Unavailable" value for mbm_total_bytes and mbm_local_bytes
on the entire filesystem.
Steps to reproduce:
1. mount -t resctrl resctrl /sys/fs/resctrl/
2. cd /sys/fs/resctrl/
3. cat mon_data/mon_L3_00/mbm_total_bytes
23189832
4. Create sub monitor group:
mkdir mon_groups/test1
5. cat mon_data/mon_L3_00/mbm_total_bytes
Unavailable
When a new monitoring group is created, a new RMID is assigned to the
new group. But the RMID is not active yet. When the events are read on
the new RMID, it is expected to report the status as "Unavailable".
When the user reads the events on the default monitoring group with
multiple subgroups, the events on all subgroups are consolidated
together. Currently, if any of the RMID reads report as "Unavailable",
then everything will be reported as "Unavailable".
Fix the issue by discarding the "Unavailable" reads and reporting all
the successful RMID reads. This is not a problem on Intel systems as
Intel reports 0 on Inactive RMIDs.
Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Reported-by: Paweł Szulik <[email protected]>
Signed-off-by: Babu Moger <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Reinette Chatre <[email protected]>
Cc: [email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213311
Link: https://lkml.kernel.org/r/162793309296.9224.15871659871696482080.stgit@bmoger-ubuntu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/resctrl/monitor.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -285,15 +285,14 @@ static u64 mbm_overflow_count(u64 prev_m
return chunks >>= shift;
}
-static int __mon_event_count(u32 rmid, struct rmid_read *rr)
+static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
{
struct mbm_state *m;
u64 chunks, tval;
tval = __rmid_read(rmid, rr->evtid);
if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) {
- rr->val = tval;
- return -EINVAL;
+ return tval;
}
switch (rr->evtid) {
case QOS_L3_OCCUP_EVENT_ID:
@@ -305,12 +304,6 @@ static int __mon_event_count(u32 rmid, s
case QOS_L3_MBM_LOCAL_EVENT_ID:
m = &rr->d->mbm_local[rmid];
break;
- default:
- /*
- * Code would never reach here because
- * an invalid event id would fail the __rmid_read.
- */
- return -EINVAL;
}
if (rr->first) {
@@ -361,23 +354,29 @@ void mon_event_count(void *info)
struct rdtgroup *rdtgrp, *entry;
struct rmid_read *rr = info;
struct list_head *head;
+ u64 ret_val;
rdtgrp = rr->rgrp;
- if (__mon_event_count(rdtgrp->mon.rmid, rr))
- return;
+ ret_val = __mon_event_count(rdtgrp->mon.rmid, rr);
/*
- * For Ctrl groups read data from child monitor groups.
+ * For Ctrl groups read data from child monitor groups and
+ * add them together. Count events which are read successfully.
+ * Discard the rmid_read's reporting errors.
*/
head = &rdtgrp->mon.crdtgrp_list;
if (rdtgrp->type == RDTCTRL_GROUP) {
list_for_each_entry(entry, head, mon.crdtgrp_list) {
- if (__mon_event_count(entry->mon.rmid, rr))
- return;
+ if (__mon_event_count(entry->mon.rmid, rr) == 0)
+ ret_val = 0;
}
}
+
+ /* Report error if none of rmid_reads are successful */
+ if (ret_val)
+ rr->val = ret_val;
}
/*
From: Cédric Le Goater <[email protected]>
commit cbc06f051c524dcfe52ef0d1f30647828e226d30 upstream.
On PowerVM, CPU-less nodes can be populated with hot-plugged CPUs at
runtime. Today, the IPI is not created for such nodes, and hot-plugged
CPUs use a bogus IPI, which leads to soft lockups.
We can not directly allocate and request the IPI on demand because
bringup_up() is called under the IRQ sparse lock. The alternative is
to allocate the IPIs for all possible nodes at startup and to request
the mapping on demand when the first CPU of a node is brought up.
Fixes: 7dcc37b3eff9 ("powerpc/xive: Map one IPI interrupt per node")
Cc: [email protected] # v5.13
Reported-by: Geetika Moolchandani <[email protected]>
Signed-off-by: Cédric Le Goater <[email protected]>
Tested-by: Srikar Dronamraju <[email protected]>
Tested-by: Laurent Vivier <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/sysdev/xive/common.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -67,6 +67,7 @@ static struct irq_domain *xive_irq_domai
static struct xive_ipi_desc {
unsigned int irq;
char name[16];
+ atomic_t started;
} *xive_ipis;
/*
@@ -1120,7 +1121,7 @@ static const struct irq_domain_ops xive_
.alloc = xive_ipi_irq_domain_alloc,
};
-static int __init xive_request_ipi(void)
+static int __init xive_init_ipis(void)
{
struct fwnode_handle *fwnode;
struct irq_domain *ipi_domain;
@@ -1144,10 +1145,6 @@ static int __init xive_request_ipi(void)
struct xive_ipi_desc *xid = &xive_ipis[node];
struct xive_ipi_alloc_info info = { node };
- /* Skip nodes without CPUs */
- if (cpumask_empty(cpumask_of_node(node)))
- continue;
-
/*
* Map one IPI interrupt per node for all cpus of that node.
* Since the HW interrupt number doesn't have any meaning,
@@ -1159,11 +1156,6 @@ static int __init xive_request_ipi(void)
xid->irq = ret;
snprintf(xid->name, sizeof(xid->name), "IPI-%d", node);
-
- ret = request_irq(xid->irq, xive_muxed_ipi_action,
- IRQF_PERCPU | IRQF_NO_THREAD, xid->name, NULL);
-
- WARN(ret < 0, "Failed to request IPI %d: %d\n", xid->irq, ret);
}
return ret;
@@ -1178,6 +1170,22 @@ out:
return ret;
}
+static int __init xive_request_ipi(unsigned int cpu)
+{
+ struct xive_ipi_desc *xid = &xive_ipis[early_cpu_to_node(cpu)];
+ int ret;
+
+ if (atomic_inc_return(&xid->started) > 1)
+ return 0;
+
+ ret = request_irq(xid->irq, xive_muxed_ipi_action,
+ IRQF_PERCPU | IRQF_NO_THREAD,
+ xid->name, NULL);
+
+ WARN(ret < 0, "Failed to request IPI %d: %d\n", xid->irq, ret);
+ return ret;
+}
+
static int xive_setup_cpu_ipi(unsigned int cpu)
{
unsigned int xive_ipi_irq = xive_ipi_cpu_to_irq(cpu);
@@ -1192,6 +1200,9 @@ static int xive_setup_cpu_ipi(unsigned i
if (xc->hw_ipi != XIVE_BAD_IRQ)
return 0;
+ /* Register the IPI */
+ xive_request_ipi(cpu);
+
/* Grab an IPI from the backend, this will populate xc->hw_ipi */
if (xive_ops->get_ipi(cpu, xc))
return -EIO;
@@ -1231,6 +1242,8 @@ static void xive_cleanup_cpu_ipi(unsigne
if (xc->hw_ipi == XIVE_BAD_IRQ)
return;
+ /* TODO: clear IPI mapping */
+
/* Mask the IPI */
xive_do_source_set_mask(&xc->ipi_data, true);
@@ -1253,7 +1266,7 @@ void __init xive_smp_probe(void)
smp_ops->cause_ipi = xive_cause_ipi;
/* Register the IPI */
- xive_request_ipi();
+ xive_init_ipis();
/* Allocate and setup IPI for the boot CPU */
xive_setup_cpu_ipi(smp_processor_id());
From: Vladimir Oltean <[email protected]>
[ Upstream commit 871a73a1c8f55da0a3db234e9dd816ea4fd546f2 ]
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: 58c59ef9e930 ("net: dsa: lantiq: Add Forwarding Database access")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/lantiq_gswip.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 314ae78bbdd6..e78026ef6d8c 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1404,11 +1404,17 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
addr[1] = mac_bridge.key[2] & 0xff;
addr[0] = (mac_bridge.key[2] >> 8) & 0xff;
if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) {
- if (mac_bridge.val[0] & BIT(port))
- cb(addr, 0, true, data);
+ if (mac_bridge.val[0] & BIT(port)) {
+ err = cb(addr, 0, true, data);
+ if (err)
+ return err;
+ }
} else {
- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port)
- cb(addr, 0, false, data);
+ if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
+ err = cb(addr, 0, false, data);
+ if (err)
+ return err;
+ }
}
}
return 0;
--
2.30.2
From: Ben Hutchings <[email protected]>
[ Upstream commit 411d466d94a6b16a20c8b552e403b7e8ce2397a2 ]
The magic number 4 in VLAN table lookup was the number of entries we
can read and write at once. Using phy_port_cnt here doesn't make
sense and presumably broke VLAN filtering for 3-port switches. Change
it back to 4.
Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt ...")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 8e2a8103d590..8eb9a45c98cf 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -684,8 +684,8 @@ static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr)
shifts = ksz8->shifts;
ksz8_r_table(dev, TABLE_VLAN, addr, &data);
- addr *= dev->phy_port_cnt;
- for (i = 0; i < dev->phy_port_cnt; i++) {
+ addr *= 4;
+ for (i = 0; i < 4; i++) {
dev->vlan_cache[addr + i].table[0] = (u16)data;
data >>= shifts[VLAN_TABLE];
}
@@ -699,7 +699,7 @@ static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
u64 buf;
data = (u16 *)&buf;
- addr = vid / dev->phy_port_cnt;
+ addr = vid / 4;
index = vid & 3;
ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
*vlan = data[index];
@@ -713,7 +713,7 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
u64 buf;
data = (u16 *)&buf;
- addr = vid / dev->phy_port_cnt;
+ addr = vid / 4;
index = vid & 3;
ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
data[index] = vlan;
--
2.30.2
From: Sean Christopherson <[email protected]>
commit 524a1e4e381fc5e7781008d5bd420fd1357c0113 upstream.
Pass "all ones" as the end GFN to signal "zap all" for the TDP MMU and
really zap all SPTEs in this case. As is, zap_gfn_range() skips non-leaf
SPTEs whose range exceeds the range to be zapped. If shadow_phys_bits is
not aligned to the range size of top-level SPTEs, e.g. 512gb with 4-level
paging, the "zap all" flows will skip top-level SPTEs whose range extends
beyond shadow_phys_bits and leak their SPs when the VM is destroyed.
Use the current upper bound (based on host.MAXPHYADDR) to detect that the
caller wants to zap all SPTEs, e.g. instead of using the max theoretical
gfn, 1 << (52 - 12). The more precise upper bound allows the TDP iterator
to terminate its walk earlier when running on hosts with MAXPHYADDR < 52.
Add a WARN on kmv->arch.tdp_mmu_pages when the TDP MMU is destroyed to
help future debuggers should KVM decide to leak SPTEs again.
The bug is most easily reproduced by running (and unloading!) KVM in a
VM whose host.MAXPHYADDR < 39, as the SPTE for gfn=0 will be skipped.
=============================================================================
BUG kvm_mmu_page_header (Not tainted): Objects remaining in kvm_mmu_page_header on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0x000000004d8f7af1 objects=22 used=2 fp=0x00000000624d29ac flags=0x4000000000000200(slab|zone=1)
CPU: 0 PID: 1582 Comm: rmmod Not tainted 5.14.0-rc2+ #420
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack_lvl+0x45/0x59
slab_err+0x95/0xc9
__kmem_cache_shutdown.cold+0x3c/0x158
kmem_cache_destroy+0x3d/0xf0
kvm_mmu_module_exit+0xa/0x30 [kvm]
kvm_arch_exit+0x5d/0x90 [kvm]
kvm_exit+0x78/0x90 [kvm]
vmx_exit+0x1a/0x50 [kvm_intel]
__x64_sys_delete_module+0x13f/0x220
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU")
Cc: [email protected]
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -41,6 +41,7 @@ void kvm_mmu_uninit_tdp_mmu(struct kvm *
if (!kvm->arch.tdp_mmu_enabled)
return;
+ WARN_ON(!list_empty(&kvm->arch.tdp_mmu_pages));
WARN_ON(!list_empty(&kvm->arch.tdp_mmu_roots));
/*
@@ -79,8 +80,6 @@ static void tdp_mmu_free_sp_rcu_callback
void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
bool shared)
{
- gfn_t max_gfn = 1ULL << (shadow_phys_bits - PAGE_SHIFT);
-
kvm_lockdep_assert_mmu_lock_held(kvm, shared);
if (!refcount_dec_and_test(&root->tdp_mmu_root_count))
@@ -92,7 +91,7 @@ void kvm_tdp_mmu_put_root(struct kvm *kv
list_del_rcu(&root->link);
spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
- zap_gfn_range(kvm, root, 0, max_gfn, false, false, shared);
+ zap_gfn_range(kvm, root, 0, -1ull, false, false, shared);
call_rcu(&root->rcu_head, tdp_mmu_free_sp_rcu_callback);
}
@@ -722,8 +721,17 @@ static bool zap_gfn_range(struct kvm *kv
gfn_t start, gfn_t end, bool can_yield, bool flush,
bool shared)
{
+ gfn_t max_gfn_host = 1ULL << (shadow_phys_bits - PAGE_SHIFT);
+ bool zap_all = (start == 0 && end >= max_gfn_host);
struct tdp_iter iter;
+ /*
+ * Bound the walk at host.MAXPHYADDR, guest accesses beyond that will
+ * hit a #PF(RSVD) and never get to an EPT Violation/Misconfig / #NPF,
+ * and so KVM will never install a SPTE for such addresses.
+ */
+ end = min(end, max_gfn_host);
+
kvm_lockdep_assert_mmu_lock_held(kvm, shared);
rcu_read_lock();
@@ -742,9 +750,10 @@ retry:
/*
* If this is a non-last-level SPTE that covers a larger range
* than should be zapped, continue, and zap the mappings at a
- * lower level.
+ * lower level, except when zapping all SPTEs.
*/
- if ((iter.gfn < start ||
+ if (!zap_all &&
+ (iter.gfn < start ||
iter.gfn + KVM_PAGES_PER_HPAGE(iter.level) > end) &&
!is_last_spte(iter.old_spte, iter.level))
continue;
@@ -792,12 +801,11 @@ bool __kvm_tdp_mmu_zap_gfn_range(struct
void kvm_tdp_mmu_zap_all(struct kvm *kvm)
{
- gfn_t max_gfn = 1ULL << (shadow_phys_bits - PAGE_SHIFT);
bool flush = false;
int i;
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++)
- flush = kvm_tdp_mmu_zap_gfn_range(kvm, i, 0, max_gfn,
+ flush = kvm_tdp_mmu_zap_gfn_range(kvm, i, 0, -1ull,
flush, false);
if (flush)
@@ -836,7 +844,6 @@ static struct kvm_mmu_page *next_invalid
*/
void kvm_tdp_mmu_zap_invalidated_roots(struct kvm *kvm)
{
- gfn_t max_gfn = 1ULL << (shadow_phys_bits - PAGE_SHIFT);
struct kvm_mmu_page *next_root;
struct kvm_mmu_page *root;
bool flush = false;
@@ -852,8 +859,7 @@ void kvm_tdp_mmu_zap_invalidated_roots(s
rcu_read_unlock();
- flush = zap_gfn_range(kvm, root, 0, max_gfn, true, flush,
- true);
+ flush = zap_gfn_range(kvm, root, 0, -1ull, true, flush, true);
/*
* Put the reference acquired in
From: Matt Roper <[email protected]>
[ Upstream commit 24d032e2359e3abc926b3d423f49a7c33e0b7836 ]
The SFC_DONE register lives within the corresponding VD0/VD2/VD4/VD6
forcewake domain and is not accessible if the vdbox in that domain is
fused off and the forcewake is not initialized.
This mistake went unnoticed because until recently we were using the
wrong register offset for the SFC_DONE register; once the register
offset was corrected, we started hitting errors like
<4> [544.989065] i915 0000:cc:00.0: Uninitialized forcewake domain(s) 0x80 accessed at 0x1ce000
on parts with fused-off vdbox engines.
Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state")
Fixes: 9c9c6d0ab08a ("drm/i915: Correct SFC_DONE register offset")
Cc: Daniele Ceraolo Spurio <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: José Roberto de Souza <[email protected]>
(cherry picked from commit c5589bb5dccb0c5cb74910da93663f489589f3ce)
Signed-off-by: Rodrigo Vivi <[email protected]>
[Changed Fixes tag to match the cherry-picked 82929a2140eb]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/i915_gpu_error.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c
index bb181fe5d47e..725f241a428c 100644
--- a/drivers/gpu/drm/i915/i915_gpu_error.c
+++ b/drivers/gpu/drm/i915/i915_gpu_error.c
@@ -728,9 +728,18 @@ static void err_print_gt(struct drm_i915_error_state_buf *m,
if (INTEL_GEN(m->i915) >= 12) {
int i;
- for (i = 0; i < GEN12_SFC_DONE_MAX; i++)
+ for (i = 0; i < GEN12_SFC_DONE_MAX; i++) {
+ /*
+ * SFC_DONE resides in the VD forcewake domain, so it
+ * only exists if the corresponding VCS engine is
+ * present.
+ */
+ if (!HAS_ENGINE(gt->_gt, _VCS(i * 2)))
+ continue;
+
err_printf(m, " SFC_DONE[%d]: 0x%08x\n", i,
gt->sfc_done[i]);
+ }
err_printf(m, " GAM_DONE: 0x%08x\n", gt->gam_done);
}
@@ -1586,6 +1595,14 @@ static void gt_record_regs(struct intel_gt_coredump *gt)
if (INTEL_GEN(i915) >= 12) {
for (i = 0; i < GEN12_SFC_DONE_MAX; i++) {
+ /*
+ * SFC_DONE resides in the VD forcewake domain, so it
+ * only exists if the corresponding VCS engine is
+ * present.
+ */
+ if (!HAS_ENGINE(gt->_gt, _VCS(i * 2)))
+ continue;
+
gt->sfc_done[i] =
intel_uncore_read(uncore, GEN12_SFC_DONE(i));
}
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit b9255a7cb51754e8d2645b65dd31805e282b4f3e upstream.
Nothing enforces the posted writes to be visible when the function
returns. Flush them even if the flush might be redundant when the entry is
masked already as the unmask will flush as well. This is either setup or a
rare affinity change event so the extra flush is not the end of the world.
While this is more a theoretical issue especially the logic in the X86
specific msi_set_affinity() function relies on the assumption that the
update has reached the hardware when the function returns.
Again, as this never has been enforced the Fixes tag refers to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -311,6 +311,9 @@ void __pci_write_msi_msg(struct msi_desc
if (unmasked)
__pci_msix_desc_mask_irq(entry, 0);
+
+ /* Ensure that the writes are visible in the device */
+ readl(base + PCI_MSIX_ENTRY_DATA);
} else {
int pos = dev->msi_cap;
u16 msgctl;
@@ -331,6 +334,8 @@ void __pci_write_msi_msg(struct msi_desc
pci_write_config_word(dev, pos + PCI_MSI_DATA_32,
msg->data);
}
+ /* Ensure that the writes are visible in the device */
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
}
skip:
From: Sean Christopherson <[email protected]>
commit 18712c13709d2de9516c5d3414f707c4f0a9c190 upstream.
Use vmx_need_pf_intercept() when determining if L0 wants to handle a #PF
in L2 or if the VM-Exit should be forwarded to L1. The current logic fails
to account for the case where #PF is intercepted to handle
guest.MAXPHYADDR < host.MAXPHYADDR and ends up reflecting all #PFs into
L1. At best, L1 will complain and inject the #PF back into L2. At
worst, L1 will eat the unexpected fault and cause L2 to hang on infinite
page faults.
Note, while the bug was technically introduced by the commit that added
support for the MAXPHYADDR madness, the shame is all on commit
a0c134347baf ("KVM: VMX: introduce vmx_need_pf_intercept").
Fixes: 1dbf5d68af6f ("KVM: VMX: Add guest physical address check in EPT violation and misconfig")
Cc: [email protected]
Cc: Peter Shier <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Jim Mattson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/nested.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -5798,7 +5798,8 @@ static bool nested_vmx_l0_wants_exit(str
if (is_nmi(intr_info))
return true;
else if (is_page_fault(intr_info))
- return vcpu->arch.apf.host_apf_flags || !enable_ept;
+ return vcpu->arch.apf.host_apf_flags ||
+ vmx_need_pf_intercept(vcpu);
else if (is_debug(intr_info) &&
vcpu->guest_debug &
(KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
From: Neal Cardwell <[email protected]>
[ Upstream commit 6de035fec045f8ae5ee5f3a02373a18b939e91fb ]
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <[email protected]>
Reviewed-by: Yuchung Cheng <[email protected]>
Reviewed-by: Kevin Yang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bbr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_bbr.c b/net/ipv4/tcp_bbr.c
index 6ea3dc2e4219..6274462b86b4 100644
--- a/net/ipv4/tcp_bbr.c
+++ b/net/ipv4/tcp_bbr.c
@@ -1041,7 +1041,7 @@ static void bbr_init(struct sock *sk)
bbr->prior_cwnd = 0;
tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
bbr->rtt_cnt = 0;
- bbr->next_rtt_delivered = 0;
+ bbr->next_rtt_delivered = tp->delivered;
bbr->prev_ca_state = TCP_CA_Open;
bbr->packet_conservation = 0;
--
2.30.2
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 3a262423755b83a5f85009ace415d6e7f572dfe8 ]
Commit 82046702e288 ("efi/libstub/arm64: Replace 'preferred' offset with
alignment check") simplified the way the stub moves the kernel image
around in memory before booting it, given that a relocatable image does
not need to be copied to a 2M aligned offset if it was loaded on a 64k
boundary by EFI.
Commit d32de9130f6c ("efi/arm64: libstub: Deal gracefully with
EFI_RNG_PROTOCOL failure") inadvertently defeated this logic by
overriding the value of efi_nokaslr if EFI_RNG_PROTOCOL is not
available, which was mistaken by the loader logic as an explicit request
on the part of the user to disable KASLR and any associated relocation
of an Image not loaded on a 2M boundary.
So let's reinstate this functionality, by capturing the value of
efi_nokaslr at function entry to choose the minimum alignment.
Fixes: d32de9130f6c ("efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure")
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/libstub/arm64-stub.c | 28 +++++++++++------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
index 3698c1ce2940..6f214c9c303e 100644
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -79,18 +79,6 @@ static bool check_image_region(u64 base, u64 size)
return ret;
}
-/*
- * Although relocatable kernels can fix up the misalignment with respect to
- * MIN_KIMG_ALIGN, the resulting virtual text addresses are subtly out of
- * sync with those recorded in the vmlinux when kaslr is disabled but the
- * image required relocation anyway. Therefore retain 2M alignment unless
- * KASLR is in use.
- */
-static u64 min_kimg_align(void)
-{
- return efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN;
-}
-
efi_status_t handle_kernel_image(unsigned long *image_addr,
unsigned long *image_size,
unsigned long *reserve_addr,
@@ -101,6 +89,16 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
unsigned long kernel_size, kernel_memsize = 0;
u32 phys_seed = 0;
+ /*
+ * Although relocatable kernels can fix up the misalignment with
+ * respect to MIN_KIMG_ALIGN, the resulting virtual text addresses are
+ * subtly out of sync with those recorded in the vmlinux when kaslr is
+ * disabled but the image required relocation anyway. Therefore retain
+ * 2M alignment if KASLR was explicitly disabled, even if it was not
+ * going to be activated to begin with.
+ */
+ u64 min_kimg_align = efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN;
+
if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
if (!efi_nokaslr) {
status = efi_get_random_bytes(sizeof(phys_seed),
@@ -130,7 +128,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
* If KASLR is enabled, and we have some randomness available,
* locate the kernel at a randomized offset in physical memory.
*/
- status = efi_random_alloc(*reserve_size, min_kimg_align(),
+ status = efi_random_alloc(*reserve_size, min_kimg_align,
reserve_addr, phys_seed);
} else {
status = EFI_OUT_OF_RESOURCES;
@@ -139,7 +137,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
if (status != EFI_SUCCESS) {
if (!check_image_region((u64)_text, kernel_memsize)) {
efi_err("FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region\n");
- } else if (IS_ALIGNED((u64)_text, min_kimg_align())) {
+ } else if (IS_ALIGNED((u64)_text, min_kimg_align)) {
/*
* Just execute from wherever we were loaded by the
* UEFI PE/COFF loader if the alignment is suitable.
@@ -150,7 +148,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
}
status = efi_allocate_pages_aligned(*reserve_size, reserve_addr,
- ULONG_MAX, min_kimg_align());
+ ULONG_MAX, min_kimg_align);
if (status != EFI_SUCCESS) {
efi_err("Failed to relocate kernel\n");
--
2.30.2
From: Christophe Leroy <[email protected]>
commit 8241461536f21bbe51308a6916d1c9fb2e6b75a7 upstream.
Running an SMP kernel on an UP platform not prepared for it,
I encountered the following OOPS:
BUG: Kernel NULL pointer dereference on read at 0x00000034
Faulting instruction address: 0xc0a04110
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K SMP NR_CPUS=2 CMPCPRO
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-pmac-00001-g230fedfaad21 #5234
NIP: c0a04110 LR: c0a040d8 CTR: c0a04084
REGS: e100dda0 TRAP: 0300 Not tainted (5.13.0-pmac-00001-g230fedfaad21)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 84000284 XER: 00000000
DAR: 00000034 DSISR: 20000000
GPR00: c0006bd4 e100de60 c1033320 00000000 00000000 c0942274 00000000 00000000
GPR08: 00000000 00000000 00000001 00000063 00000007 00000000 c0006f30 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000005
GPR24: c0c67d74 c0c67f1c c0c60000 c0c67d70 c0c0c558 1efdf000 c0c00020 00000000
NIP [c0a04110] topology_init+0x8c/0x138
LR [c0a040d8] topology_init+0x54/0x138
Call Trace:
[e100de60] [80808080] 0x80808080 (unreliable)
[e100de90] [c0006bd4] do_one_initcall+0x48/0x1bc
[e100def0] [c0a0150c] kernel_init_freeable+0x1c8/0x278
[e100df20] [c0006f44] kernel_init+0x14/0x10c
[e100df30] [c00190fc] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
7c692e70 7d290194 7c035040 7c7f1b78 5529103a 546706fe 5468103a 39400001
7c641b78 40800054 80c690b4 7fb9402e <81060034> 7fbeea14 2c080000 7fa3eb78
---[ end trace b246ffbc6bbbb6fb ]---
Fix it by checking smp_ops before using it, as already done in
several other places in the arch/powerpc/kernel/smp.c
Fixes: 39f87561454d ("powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/75287841cbb8740edd44880fe60be66d489160d9.1628097995.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -1167,7 +1167,7 @@ static int __init topology_init(void)
* CPU. For instance, the boot cpu might never be valid
* for hotplugging.
*/
- if (smp_ops->cpu_offline_self)
+ if (smp_ops && smp_ops->cpu_offline_self)
c->hotpluggable = 1;
#endif
From: Jeff Layton <[email protected]>
commit df2c0cb7f8e8c83e495260ad86df8c5da947f2a7 upstream.
They both say that the snap_rwsem must be held for write, but I don't
see any real reason for it, and it's not currently always called that
way.
The lookup is just walking the rbtree, so holding it for read should be
fine there. The "get" is bumping the refcount and (possibly) removing
it from the empty list. I see no need to hold the snap_rwsem for write
for that.
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/snap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -60,12 +60,12 @@
/*
* increase ref count for the realm
*
- * caller must hold snap_rwsem for write.
+ * caller must hold snap_rwsem.
*/
void ceph_get_snap_realm(struct ceph_mds_client *mdsc,
struct ceph_snap_realm *realm)
{
- lockdep_assert_held_write(&mdsc->snap_rwsem);
+ lockdep_assert_held(&mdsc->snap_rwsem);
dout("get_realm %p %d -> %d\n", realm,
atomic_read(&realm->nref), atomic_read(&realm->nref)+1);
@@ -139,7 +139,7 @@ static struct ceph_snap_realm *ceph_crea
/*
* lookup the realm rooted at @ino.
*
- * caller must hold snap_rwsem for write.
+ * caller must hold snap_rwsem.
*/
static struct ceph_snap_realm *__lookup_snap_realm(struct ceph_mds_client *mdsc,
u64 ino)
@@ -147,7 +147,7 @@ static struct ceph_snap_realm *__lookup_
struct rb_node *n = mdsc->snap_realms.rb_node;
struct ceph_snap_realm *r;
- lockdep_assert_held_write(&mdsc->snap_rwsem);
+ lockdep_assert_held(&mdsc->snap_rwsem);
while (n) {
r = rb_entry(n, struct ceph_snap_realm, node);
From: Thomas Gleixner <[email protected]>
commit d28d4ad2a1aef27458b3383725bb179beb8d015c upstream.
No point in using the raw write function from shutdown. Preparatory change
to introduce proper serialization for the msi_desc::masked cache.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -961,7 +961,7 @@ static void pci_msi_shutdown(struct pci_
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
- __pci_msi_desc_mask_irq(desc, mask, 0);
+ msi_mask_irq(desc, mask, 0);
/* Restore dev->irq to its default pin-assertion IRQ */
dev->irq = desc->msi_attrib.default_irq;
From: Christophe Leroy <[email protected]>
commit 01fcac8e4dfc112f420dcaeb70056a74e326cacf upstream.
single_step_exception() is called by emulate_single_step() which
is called from (at least) alignment exception() handler and
program_check_exception() handler.
Redefine it as a regular __single_step_exception() which is called
by both single_step_exception() handler and emulate_single_step()
function.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Cc: [email protected] # v5.12+
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/aed174f5cbc06f2cf95233c071d8aac948e46043.1628611921.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/traps.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1103,7 +1103,7 @@ DEFINE_INTERRUPT_HANDLER(RunModeExceptio
_exception(SIGTRAP, regs, TRAP_UNK, 0);
}
-DEFINE_INTERRUPT_HANDLER(single_step_exception)
+static void __single_step_exception(struct pt_regs *regs)
{
clear_single_step(regs);
clear_br_trace(regs);
@@ -1120,6 +1120,11 @@ DEFINE_INTERRUPT_HANDLER(single_step_exc
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
}
+DEFINE_INTERRUPT_HANDLER(single_step_exception)
+{
+ __single_step_exception(regs);
+}
+
/*
* After we have successfully emulated an instruction, we have to
* check if the instruction was being single-stepped, and if so,
@@ -1129,7 +1134,7 @@ DEFINE_INTERRUPT_HANDLER(single_step_exc
static void emulate_single_step(struct pt_regs *regs)
{
if (single_stepping(regs))
- single_step_exception(regs);
+ __single_step_exception(regs);
}
static inline int __parse_fpscr(unsigned long fpscr)
From: Thomas Gleixner <[email protected]>
commit da181dc974ad667579baece33c2c8d2d1e4558d5 upstream.
The specification (PCIe r5.0, sec 6.1.4.5) states:
For MSI-X, a function is permitted to cache Address and Data values
from unmasked MSI-X Table entries. However, anytime software unmasks a
currently masked MSI-X Table entry either by clearing its Mask bit or
by clearing the Function Mask bit, the function must update any Address
or Data values that it cached from that entry. If software changes the
Address or Data value of an entry while the entry is unmasked, the
result is undefined.
The Linux kernel's MSI-X support never enforced that the entry is masked
before the entry is modified hence the Fixes tag refers to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Enforce the entry to be masked across the update.
There is no point in enforcing this to be handled at all possible call
sites as this is just pointless code duplication and the common update
function is the obvious place to enforce this.
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Reported-by: Kevin Tian <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -289,13 +289,28 @@ void __pci_write_msi_msg(struct msi_desc
/* Don't touch the hardware now */
} else if (entry->msi_attrib.is_msix) {
void __iomem *base = pci_msix_desc_addr(entry);
+ bool unmasked = !(entry->masked & PCI_MSIX_ENTRY_CTRL_MASKBIT);
if (!base)
goto skip;
+ /*
+ * The specification mandates that the entry is masked
+ * when the message is modified:
+ *
+ * "If software changes the Address or Data value of an
+ * entry while the entry is unmasked, the result is
+ * undefined."
+ */
+ if (unmasked)
+ __pci_msix_desc_mask_irq(entry, PCI_MSIX_ENTRY_CTRL_MASKBIT);
+
writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
+
+ if (unmasked)
+ __pci_msix_desc_mask_irq(entry, 0);
} else {
int pos = dev->msi_cap;
u16 msgctl;
From: Kuan-Ying Lee <[email protected]>
commit 340caf178ddc2efb0294afaf54c715f7928c258e upstream.
The address still includes the tags when it is printed. With hardware
tag-based kasan enabled, we will get a false positive KASAN issue when
we access metadata.
Reset the tag before we access the metadata.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Kuan-Ying Lee <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chinwen Chang <[email protected]>
Cc: Nicholas Tang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -551,8 +551,8 @@ static void print_section(char *level, c
unsigned int length)
{
metadata_access_enable();
- print_hex_dump(level, kasan_reset_tag(text), DUMP_PREFIX_ADDRESS,
- 16, 1, addr, length, 1);
+ print_hex_dump(level, text, DUMP_PREFIX_ADDRESS,
+ 16, 1, kasan_reset_tag((void *)addr), length, 1);
metadata_access_disable();
}
From: Thomas Gleixner <[email protected]>
commit 361fd37397f77578735907341579397d5bed0a2d upstream.
msi_mask_irq() takes a mask and a flags argument. The mask argument is used
to mask out bits from the cached mask and the flags argument to set bits.
Some places invoke it with a flags argument which sets bits which are not
used by the device, i.e. when the device supports up to 8 vectors a full
unmask in some places sets the mask to 0xFFFFFF00. While devices probably
do not care, it's still bad practice.
Fixes: 7ba1930db02f ("PCI MSI: Unmask MSI if setup failed")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -656,21 +656,21 @@ static int msi_capability_init(struct pc
/* Configure MSI capability structure */
ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
if (ret) {
- msi_mask_irq(entry, mask, ~mask);
+ msi_mask_irq(entry, mask, 0);
free_msi_irqs(dev);
return ret;
}
ret = msi_verify_entries(dev);
if (ret) {
- msi_mask_irq(entry, mask, ~mask);
+ msi_mask_irq(entry, mask, 0);
free_msi_irqs(dev);
return ret;
}
ret = populate_msi_sysfs(dev);
if (ret) {
- msi_mask_irq(entry, mask, ~mask);
+ msi_mask_irq(entry, mask, 0);
free_msi_irqs(dev);
return ret;
}
@@ -962,7 +962,7 @@ static void pci_msi_shutdown(struct pci_
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
/* Keep cached state to be restored */
- __pci_msi_desc_mask_irq(desc, mask, ~mask);
+ __pci_msi_desc_mask_irq(desc, mask, 0);
/* Restore dev->irq to its default pin-assertion IRQ */
dev->irq = desc->msi_attrib.default_irq;
From: Thomas Gleixner <[email protected]>
commit 438553958ba19296663c6d6583d208dfb6792830 upstream.
The ordering of MSI-X enable in hardware is dysfunctional:
1) MSI-X is disabled in the control register
2) Various setup functions
3) pci_msi_setup_msi_irqs() is invoked which ends up accessing
the MSI-X table entries
4) MSI-X is enabled and masked in the control register with the
comment that enabling is required for some hardware to access
the MSI-X table
Step #4 obviously contradicts #3. The history of this is an issue with the
NIU hardware. When #4 was introduced the table access actually happened in
msix_program_entries() which was invoked after enabling and masking MSI-X.
This was changed in commit d71d6432e105 ("PCI/MSI: Kill redundant call of
irq_set_msi_desc() for MSI-X interrupts") which removed the table write
from msix_program_entries().
Interestingly enough nobody noticed and either NIU still works or it did
not get any testing with a kernel 3.19 or later.
Nevertheless this is inconsistent and there is no reason why MSI-X can't be
enabled and masked in the control register early on, i.e. move step #4
above to step #1. This preserves the NIU workaround and has no side effects
on other hardware.
Fixes: d71d6432e105 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -772,18 +772,25 @@ static int msix_capability_init(struct p
u16 control;
void __iomem *base;
- /* Ensure MSI-X is disabled while it is set up */
- pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+ /*
+ * Some devices require MSI-X to be enabled before the MSI-X
+ * registers can be accessed. Mask all the vectors to prevent
+ * interrupts coming in before they're fully set up.
+ */
+ pci_msix_clear_and_set_ctrl(dev, 0, PCI_MSIX_FLAGS_MASKALL |
+ PCI_MSIX_FLAGS_ENABLE);
pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
/* Request & Map MSI-X table region */
base = msix_map_region(dev, msix_table_size(control));
- if (!base)
- return -ENOMEM;
+ if (!base) {
+ ret = -ENOMEM;
+ goto out_disable;
+ }
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
- return ret;
+ goto out_disable;
ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
@@ -794,14 +801,6 @@ static int msix_capability_init(struct p
if (ret)
goto out_free;
- /*
- * Some devices require MSI-X to be enabled before we can touch the
- * MSI-X registers. We need to mask all the vectors to prevent
- * interrupts coming in before they're fully set up.
- */
- pci_msix_clear_and_set_ctrl(dev, 0,
- PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE);
-
msix_program_entries(dev, entries);
ret = populate_msi_sysfs(dev);
@@ -836,6 +835,9 @@ out_avail:
out_free:
free_msi_irqs(dev);
+out_disable:
+ pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+
return ret;
}
From: Sean Christopherson <[email protected]>
commit ce25681d59ffc4303321e555a2d71b1946af07da upstream.
Add yet another spinlock for the TDP MMU and take it when marking indirect
shadow pages unsync. When using the TDP MMU and L1 is running L2(s) with
nested TDP, KVM may encounter shadow pages for the TDP entries managed by
L1 (controlling L2) when handling a TDP MMU page fault. The unsync logic
is not thread safe, e.g. the kvm_mmu_page fields are not atomic, and
misbehaves when a shadow page is marked unsync via a TDP MMU page fault,
which runs with mmu_lock held for read, not write.
Lack of a critical section manifests most visibly as an underflow of
unsync_children in clear_unsync_child_bit() due to unsync_children being
corrupted when multiple CPUs write it without a critical section and
without atomic operations. But underflow is the best case scenario. The
worst case scenario is that unsync_children prematurely hits '0' and
leads to guest memory corruption due to KVM neglecting to properly sync
shadow pages.
Use an entirely new spinlock even though piggybacking tdp_mmu_pages_lock
would functionally be ok. Usurping the lock could degrade performance when
building upper level page tables on different vCPUs, especially since the
unsync flow could hold the lock for a comparatively long time depending on
the number of indirect shadow pages and the depth of the paging tree.
For simplicity, take the lock for all MMUs, even though KVM could fairly
easily know that mmu_lock is held for write. If mmu_lock is held for
write, there cannot be contention for the inner spinlock, and marking
shadow pages unsync across multiple vCPUs will be slow enough that
bouncing the kvm_arch cacheline should be in the noise.
Note, even though L2 could theoretically be given access to its own EPT
entries, a nested MMU must hold mmu_lock for write and thus cannot race
against a TDP MMU page fault. I.e. the additional spinlock only _needs_ to
be taken by the TDP MMU, as opposed to being taken by any MMU for a VM
that is running with the TDP MMU enabled. Holding mmu_lock for read also
prevents the indirect shadow page from being freed. But as above, keep
it simple and always take the lock.
Alternative #1, the TDP MMU could simply pass "false" for can_unsync and
effectively disable unsync behavior for nested TDP. Write protecting leaf
shadow pages is unlikely to noticeably impact traditional L1 VMMs, as such
VMMs typically don't modify TDP entries, but the same may not hold true for
non-standard use cases and/or VMMs that are migrating physical pages (from
L1's perspective).
Alternative #2, the unsync logic could be made thread safe. In theory,
simply converting all relevant kvm_mmu_page fields to atomics and using
atomic bitops for the bitmap would suffice. However, (a) an in-depth audit
would be required, (b) the code churn would be substantial, and (c) legacy
shadow paging would incur additional atomic operations in performance
sensitive paths for no benefit (to legacy shadow paging).
Fixes: a2855afc7ee8 ("KVM: x86/mmu: Allow parallel page faults for the TDP MMU")
Cc: [email protected]
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/virt/kvm/locking.rst | 8 ++++----
arch/x86/include/asm/kvm_host.h | 7 +++++++
arch/x86/kvm/mmu/mmu.c | 28 ++++++++++++++++++++++++++++
3 files changed, 39 insertions(+), 4 deletions(-)
--- a/Documentation/virt/kvm/locking.rst
+++ b/Documentation/virt/kvm/locking.rst
@@ -20,10 +20,10 @@ On x86:
- vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock
-- kvm->arch.mmu_lock is an rwlock. kvm->arch.tdp_mmu_pages_lock is
- taken inside kvm->arch.mmu_lock, and cannot be taken without already
- holding kvm->arch.mmu_lock (typically with ``read_lock``, otherwise
- there's no need to take kvm->arch.tdp_mmu_pages_lock at all).
+- kvm->arch.mmu_lock is an rwlock. kvm->arch.tdp_mmu_pages_lock and
+ kvm->arch.mmu_unsync_pages_lock are taken inside kvm->arch.mmu_lock, and
+ cannot be taken without already holding kvm->arch.mmu_lock (typically with
+ ``read_lock`` for the TDP MMU, thus the need for additional spinlocks).
Everything else is a leaf: no other lock is taken inside the critical
sections.
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -987,6 +987,13 @@ struct kvm_arch {
struct list_head lpage_disallowed_mmu_pages;
struct kvm_page_track_notifier_node mmu_sp_tracker;
struct kvm_page_track_notifier_head track_notifier_head;
+ /*
+ * Protects marking pages unsync during page faults, as TDP MMU page
+ * faults only take mmu_lock for read. For simplicity, the unsync
+ * pages lock is always taken when marking pages unsync regardless of
+ * whether mmu_lock is held for read or write.
+ */
+ spinlock_t mmu_unsync_pages_lock;
struct list_head assigned_dev_head;
struct iommu_domain *iommu_domain;
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -2454,6 +2454,7 @@ bool mmu_need_write_protect(struct kvm_v
bool can_unsync)
{
struct kvm_mmu_page *sp;
+ bool locked = false;
if (kvm_page_track_is_active(vcpu, gfn, KVM_PAGE_TRACK_WRITE))
return true;
@@ -2465,9 +2466,34 @@ bool mmu_need_write_protect(struct kvm_v
if (sp->unsync)
continue;
+ /*
+ * TDP MMU page faults require an additional spinlock as they
+ * run with mmu_lock held for read, not write, and the unsync
+ * logic is not thread safe. Take the spinklock regardless of
+ * the MMU type to avoid extra conditionals/parameters, there's
+ * no meaningful penalty if mmu_lock is held for write.
+ */
+ if (!locked) {
+ locked = true;
+ spin_lock(&vcpu->kvm->arch.mmu_unsync_pages_lock);
+
+ /*
+ * Recheck after taking the spinlock, a different vCPU
+ * may have since marked the page unsync. A false
+ * positive on the unprotected check above is not
+ * possible as clearing sp->unsync _must_ hold mmu_lock
+ * for write, i.e. unsync cannot transition from 0->1
+ * while this CPU holds mmu_lock for read (or write).
+ */
+ if (READ_ONCE(sp->unsync))
+ continue;
+ }
+
WARN_ON(sp->role.level != PG_LEVEL_4K);
kvm_unsync_page(vcpu, sp);
}
+ if (locked)
+ spin_unlock(&vcpu->kvm->arch.mmu_unsync_pages_lock);
/*
* We need to ensure that the marking of unsync pages is visible
@@ -5514,6 +5540,8 @@ void kvm_mmu_init_vm(struct kvm *kvm)
{
struct kvm_page_track_notifier_node *node = &kvm->arch.mmu_sp_tracker;
+ spin_lock_init(&kvm->arch.mmu_unsync_pages_lock);
+
kvm_mmu_init_tdp_mmu(kvm);
node->track_write = kvm_mmu_pte_write;
From: Sean Christopherson <[email protected]>
commit 7b9cae027ba3aaac295ae23a62f47876ed97da73 upstream.
Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to
effectively get the controls for the current VMCS, as opposed to using
vmx->secondary_exec_controls, which is the cached value of KVM's desired
controls for vmcs01 and truly not reflective of any particular VMCS.
While the waitpkg control is not dynamic, i.e. vmcs01 will always hold
the same waitpkg configuration as vmx->secondary_exec_controls, the same
does not hold true for vmcs02 if the L1 VMM hides the feature from L2.
If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL,
L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP.
Fixes: 6e3ba4abcea5 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -538,7 +538,7 @@ static inline void decache_tsc_multiplie
static inline bool vmx_has_waitpkg(struct vcpu_vmx *vmx)
{
- return vmx->secondary_exec_control &
+ return secondary_exec_controls_get(vmx) &
SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE;
}
From: Ard Biesheuvel <[email protected]>
commit c32ac11da3f83bb42b986702a9b92f0a14ed4182 upstream.
On arm64, the stub only moves the kernel image around in memory if
needed, which is typically only for KASLR, given that relocatable
kernels (which is the default) can run from any 64k aligned address,
which is also the minimum alignment communicated to EFI via the PE/COFF
header.
Unfortunately, some loaders appear to ignore this header, and load the
kernel at some arbitrary offset in memory. We can deal with this, but
let's check for this condition anyway, so non-compliant code can be
spotted and fixed.
Cc: <[email protected]> # v5.10+
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/libstub/arm64-stub.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -119,6 +119,10 @@ efi_status_t handle_kernel_image(unsigne
if (image->image_base != _text)
efi_err("FIRMWARE BUG: efi_loaded_image_t::image_base has bogus value\n");
+ if (!IS_ALIGNED((u64)_text, EFI_KIMG_ALIGN))
+ efi_err("FIRMWARE BUG: kernel image not aligned on %ldk boundary\n",
+ EFI_KIMG_ALIGN >> 10);
+
kernel_size = _edata - _text;
kernel_memsize = kernel_size + (_end - _edata);
*reserve_size = kernel_memsize;
From: Christophe Leroy <[email protected]>
commit b5cfc9cd7b0426e94ffd9e9ed79d1b00ace7780a upstream.
32 bits BOOKE have special interrupts for debug and other
critical events.
When handling those interrupts, dedicated registers are saved
in the stack frame in addition to the standard registers, leading
to a shift of the pt_regs struct.
Since commit db297c3b07af ("powerpc/32: Don't save thread.regs on
interrupt entry"), the pt_regs struct is expected to be at the
same place all the time.
Instead of handling a special struct in addition to pt_regs, just
add those special registers to struct pt_regs.
Fixes: db297c3b07af ("powerpc/32: Don't save thread.regs on interrupt entry")
Cc: [email protected]
Reported-by: Radu Rendec <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/028d5483b4851b01ea4334d0751e7f260419092b.1625637264.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/ptrace.h | 16 ++++++++++++++++
arch/powerpc/kernel/asm-offsets.c | 31 ++++++++++++++-----------------
arch/powerpc/kernel/head_booke.h | 27 +++------------------------
3 files changed, 33 insertions(+), 41 deletions(-)
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -68,6 +68,22 @@ struct pt_regs
};
unsigned long __pad[4]; /* Maintain 16 byte interrupt stack alignment */
};
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
+ struct { /* Must be a multiple of 16 bytes */
+ unsigned long mas0;
+ unsigned long mas1;
+ unsigned long mas2;
+ unsigned long mas3;
+ unsigned long mas6;
+ unsigned long mas7;
+ unsigned long srr0;
+ unsigned long srr1;
+ unsigned long csrr0;
+ unsigned long csrr1;
+ unsigned long dsrr0;
+ unsigned long dsrr1;
+ };
+#endif
};
#endif
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -348,24 +348,21 @@ int main(void)
#endif
-#if defined(CONFIG_PPC32)
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
- DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
- DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
+ STACK_PT_REGS_OFFSET(MAS0, mas0);
/* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */
- DEFINE(MMUCR, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
- DEFINE(MAS1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas1));
- DEFINE(MAS2, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas2));
- DEFINE(MAS3, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas3));
- DEFINE(MAS6, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas6));
- DEFINE(MAS7, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas7));
- DEFINE(_SRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr0));
- DEFINE(_SRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr1));
- DEFINE(_CSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr0));
- DEFINE(_CSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr1));
- DEFINE(_DSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr0));
- DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
-#endif
+ STACK_PT_REGS_OFFSET(MMUCR, mas0);
+ STACK_PT_REGS_OFFSET(MAS1, mas1);
+ STACK_PT_REGS_OFFSET(MAS2, mas2);
+ STACK_PT_REGS_OFFSET(MAS3, mas3);
+ STACK_PT_REGS_OFFSET(MAS6, mas6);
+ STACK_PT_REGS_OFFSET(MAS7, mas7);
+ STACK_PT_REGS_OFFSET(_SRR0, srr0);
+ STACK_PT_REGS_OFFSET(_SRR1, srr1);
+ STACK_PT_REGS_OFFSET(_CSRR0, csrr0);
+ STACK_PT_REGS_OFFSET(_CSRR1, csrr1);
+ STACK_PT_REGS_OFFSET(_DSRR0, dsrr0);
+ STACK_PT_REGS_OFFSET(_DSRR1, dsrr1);
#endif
#ifndef CONFIG_PPC64
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -185,20 +185,18 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV
/* only on e500mc */
#define DBG_STACK_BASE dbgirq_ctx
-#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
-
#ifdef CONFIG_SMP
#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
mfspr r8,SPRN_PIR; \
slwi r8,r8,2; \
addis r8,r8,level##_STACK_BASE@ha; \
lwz r8,level##_STACK_BASE@l(r8); \
- addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
+ addi r8,r8,THREAD_SIZE - INT_FRAME_SIZE;
#else
#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
lis r8,level##_STACK_BASE@ha; \
lwz r8,level##_STACK_BASE@l(r8); \
- addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
+ addi r8,r8,THREAD_SIZE - INT_FRAME_SIZE;
#endif
/*
@@ -225,7 +223,7 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV
mtmsr r11; \
mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
+ addi r11,r11,THREAD_SIZE - INT_FRAME_SIZE; /* allocate stack frame */\
beq 1f; \
/* COMING FROM USER MODE */ \
stw r9,_CCR(r11); /* save CR */\
@@ -533,24 +531,5 @@ label:
bl kernel_fp_unavailable_exception; \
b interrupt_return
-#else /* __ASSEMBLY__ */
-struct exception_regs {
- unsigned long mas0;
- unsigned long mas1;
- unsigned long mas2;
- unsigned long mas3;
- unsigned long mas6;
- unsigned long mas7;
- unsigned long srr0;
- unsigned long srr1;
- unsigned long csrr0;
- unsigned long csrr1;
- unsigned long dsrr0;
- unsigned long dsrr1;
-};
-
-/* ensure this structure is always sized to a multiple of the stack alignment */
-#define STACK_EXC_LVL_FRAME_SIZE ALIGN(sizeof (struct exception_regs), 16)
-
#endif /* __ASSEMBLY__ */
#endif /* __HEAD_BOOKE_H__ */
From: Jeff Layton <[email protected]>
commit a6862e6708c15995bc10614b2ef34ca35b4b9078 upstream.
Turn some comments into lockdep asserts.
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/snap.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -65,6 +65,8 @@
void ceph_get_snap_realm(struct ceph_mds_client *mdsc,
struct ceph_snap_realm *realm)
{
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
dout("get_realm %p %d -> %d\n", realm,
atomic_read(&realm->nref), atomic_read(&realm->nref)+1);
/*
@@ -113,6 +115,8 @@ static struct ceph_snap_realm *ceph_crea
{
struct ceph_snap_realm *realm;
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
realm = kzalloc(sizeof(*realm), GFP_NOFS);
if (!realm)
return ERR_PTR(-ENOMEM);
@@ -143,6 +147,8 @@ static struct ceph_snap_realm *__lookup_
struct rb_node *n = mdsc->snap_realms.rb_node;
struct ceph_snap_realm *r;
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
while (n) {
r = rb_entry(n, struct ceph_snap_realm, node);
if (ino < r->ino)
@@ -176,6 +182,8 @@ static void __put_snap_realm(struct ceph
static void __destroy_snap_realm(struct ceph_mds_client *mdsc,
struct ceph_snap_realm *realm)
{
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
dout("__destroy_snap_realm %p %llx\n", realm, realm->ino);
rb_erase(&realm->node, &mdsc->snap_realms);
@@ -198,6 +206,8 @@ static void __destroy_snap_realm(struct
static void __put_snap_realm(struct ceph_mds_client *mdsc,
struct ceph_snap_realm *realm)
{
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
dout("__put_snap_realm %llx %p %d -> %d\n", realm->ino, realm,
atomic_read(&realm->nref), atomic_read(&realm->nref)-1);
if (atomic_dec_and_test(&realm->nref))
@@ -236,6 +246,8 @@ static void __cleanup_empty_realms(struc
{
struct ceph_snap_realm *realm;
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
spin_lock(&mdsc->snap_empty_lock);
while (!list_empty(&mdsc->snap_empty)) {
realm = list_first_entry(&mdsc->snap_empty,
@@ -269,6 +281,8 @@ static int adjust_snap_realm_parent(stru
{
struct ceph_snap_realm *parent;
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
if (realm->parent_ino == parentino)
return 0;
@@ -696,6 +710,8 @@ int ceph_update_snap_trace(struct ceph_m
int err = -ENOMEM;
LIST_HEAD(dirty_realms);
+ lockdep_assert_held_write(&mdsc->snap_rwsem);
+
dout("update_snap_trace deletion=%d\n", deletion);
more:
ceph_decode_need(&p, e, sizeof(*ri), bad);
From: Thomas Gleixner <[email protected]>
commit 689e6b5351573c38ccf92a0dd8b3e2c2241e4aff upstream.
The comments about preserving the cached state in pci_msi[x]_shutdown() are
misleading as the MSI descriptors are freed right after those functions
return. So there is nothing to restore. Preparatory change.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -961,7 +961,6 @@ static void pci_msi_shutdown(struct pci_
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
- /* Keep cached state to be restored */
__pci_msi_desc_mask_irq(desc, mask, 0);
/* Restore dev->irq to its default pin-assertion IRQ */
@@ -1047,10 +1046,8 @@ static void pci_msix_shutdown(struct pci
}
/* Return the device with MSI-X masked as initial states */
- for_each_pci_msi_entry(entry, dev) {
- /* Keep cached states to be restored */
+ for_each_pci_msi_entry(entry, dev)
__pci_msix_desc_mask_irq(entry, 1);
- }
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
pci_intx_for_msi(dev, 1);
From: Jeff Layton <[email protected]>
commit 8434ffe71c874b9c4e184b88d25de98c2bf5fe3f upstream.
There is a race in ceph_put_snap_realm. The change to the nref and the
spinlock acquisition are not done atomically, so you could decrement
nref, and before you take the spinlock, the nref is incremented again.
At that point, you end up putting it on the empty list when it
shouldn't be there. Eventually __cleanup_empty_realms runs and frees
it when it's still in-use.
Fix this by protecting the 1->0 transition with atomic_dec_and_lock,
and just drop the spinlock if we can get the rwsem.
Because these objects can also undergo a 0->1 refcount transition, we
must protect that change as well with the spinlock. Increment locklessly
unless the value is at 0, in which case we take the spinlock, increment
and then take it off the empty list if it did the 0->1 transition.
With these changes, I'm removing the dout() messages from these
functions, as well as in __put_snap_realm. They've always been racy, and
it's better to not print values that may be misleading.
Cc: [email protected]
URL: https://tracker.ceph.com/issues/46419
Reported-by: Mark Nelson <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Luis Henriques <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/snap.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -67,19 +67,19 @@ void ceph_get_snap_realm(struct ceph_mds
{
lockdep_assert_held(&mdsc->snap_rwsem);
- dout("get_realm %p %d -> %d\n", realm,
- atomic_read(&realm->nref), atomic_read(&realm->nref)+1);
/*
- * since we _only_ increment realm refs or empty the empty
- * list with snap_rwsem held, adjusting the empty list here is
- * safe. we do need to protect against concurrent empty list
- * additions, however.
+ * The 0->1 and 1->0 transitions must take the snap_empty_lock
+ * atomically with the refcount change. Go ahead and bump the
+ * nref here, unless it's 0, in which case we take the spinlock
+ * and then do the increment and remove it from the list.
*/
- if (atomic_inc_return(&realm->nref) == 1) {
- spin_lock(&mdsc->snap_empty_lock);
+ if (atomic_inc_not_zero(&realm->nref))
+ return;
+
+ spin_lock(&mdsc->snap_empty_lock);
+ if (atomic_inc_return(&realm->nref) == 1)
list_del_init(&realm->empty_item);
- spin_unlock(&mdsc->snap_empty_lock);
- }
+ spin_unlock(&mdsc->snap_empty_lock);
}
static void __insert_snap_realm(struct rb_root *root,
@@ -208,28 +208,28 @@ static void __put_snap_realm(struct ceph
{
lockdep_assert_held_write(&mdsc->snap_rwsem);
- dout("__put_snap_realm %llx %p %d -> %d\n", realm->ino, realm,
- atomic_read(&realm->nref), atomic_read(&realm->nref)-1);
+ /*
+ * We do not require the snap_empty_lock here, as any caller that
+ * increments the value must hold the snap_rwsem.
+ */
if (atomic_dec_and_test(&realm->nref))
__destroy_snap_realm(mdsc, realm);
}
/*
- * caller needn't hold any locks
+ * See comments in ceph_get_snap_realm. Caller needn't hold any locks.
*/
void ceph_put_snap_realm(struct ceph_mds_client *mdsc,
struct ceph_snap_realm *realm)
{
- dout("put_snap_realm %llx %p %d -> %d\n", realm->ino, realm,
- atomic_read(&realm->nref), atomic_read(&realm->nref)-1);
- if (!atomic_dec_and_test(&realm->nref))
+ if (!atomic_dec_and_lock(&realm->nref, &mdsc->snap_empty_lock))
return;
if (down_write_trylock(&mdsc->snap_rwsem)) {
+ spin_unlock(&mdsc->snap_empty_lock);
__destroy_snap_realm(mdsc, realm);
up_write(&mdsc->snap_rwsem);
} else {
- spin_lock(&mdsc->snap_empty_lock);
list_add(&realm->empty_item, &mdsc->snap_empty);
spin_unlock(&mdsc->snap_empty_lock);
}
From: Thomas Gleixner <[email protected]>
commit 77e89afc25f30abd56e76a809ee2884d7c1b63ce upstream.
Multi-MSI uses a single MSI descriptor and there is a single mask register
when the device supports per vector masking. To avoid reading back the mask
register the value is cached in the MSI descriptor and updates are done by
clearing and setting bits in the cache and writing it to the device.
But nothing protects msi_desc::masked and the mask register from being
modified concurrently on two different CPUs for two different Linux
interrupts which belong to the same multi-MSI descriptor.
Add a lock to struct device and protect any operation on the mask and the
mask register with it.
This makes the update of msi_desc::masked unconditional, but there is no
place which requires a modification of the hardware register without
updating the masked cache.
msi_mask_irq() is now an empty wrapper which will be cleaned up in follow
up changes.
The problem goes way back to the initial support of multi-MSI, but picking
the commit which introduced the mask cache is a valid cut off point
(2.6.30).
Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/core.c | 1 +
drivers/pci/msi.c | 19 ++++++++++---------
include/linux/device.h | 1 +
include/linux/msi.h | 2 +-
4 files changed, 13 insertions(+), 10 deletions(-)
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -2809,6 +2809,7 @@ void device_initialize(struct device *de
device_pm_init(dev);
set_dev_node(dev, -1);
#ifdef CONFIG_GENERIC_MSI_IRQ
+ raw_spin_lock_init(&dev->msi_lock);
INIT_LIST_HEAD(&dev->msi_list);
#endif
INIT_LIST_HEAD(&dev->links.consumers);
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -143,24 +143,25 @@ static inline __attribute_const__ u32 ms
* reliably as devices without an INTx disable bit will then generate a
* level IRQ which will never be cleared.
*/
-u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+void __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
- u32 mask_bits = desc->masked;
+ raw_spinlock_t *lock = &desc->dev->msi_lock;
+ unsigned long flags;
if (pci_msi_ignore_mask || !desc->msi_attrib.maskbit)
- return 0;
+ return;
- mask_bits &= ~mask;
- mask_bits |= flag;
+ raw_spin_lock_irqsave(lock, flags);
+ desc->masked &= ~mask;
+ desc->masked |= flag;
pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->mask_pos,
- mask_bits);
-
- return mask_bits;
+ desc->masked);
+ raw_spin_unlock_irqrestore(lock, flags);
}
static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
- desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag);
+ __pci_msi_desc_mask_irq(desc, mask, flag);
}
static void __iomem *pci_msix_desc_addr(struct msi_desc *desc)
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -496,6 +496,7 @@ struct device {
struct dev_pin_info *pins;
#endif
#ifdef CONFIG_GENERIC_MSI_IRQ
+ raw_spinlock_t msi_lock;
struct list_head msi_list;
#endif
#ifdef CONFIG_DMA_OPS
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -233,7 +233,7 @@ void __pci_read_msi_msg(struct msi_desc
void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag);
-u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
+void __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
void pci_msi_mask_irq(struct irq_data *data);
void pci_msi_unmask_irq(struct irq_data *data);
From: Laurent Dufour <[email protected]>
commit c18956e6e0b95f78dad2773ecc8c61a9e41f6405 upstream.
After LPM, when migrating from a system with security mitigation enabled
to a system with mitigation disabled, the security flavor exposed in
/proc is not correctly set back to 0.
Do not assume the value of the security flavor is set to 0 when entering
init_cpu_char_feature_flags(), so when called after a LPM, the value is
set correctly even if the mitigation are not turned off.
Fixes: 6ce56e1ac380 ("powerpc/pseries: export LPAR security flavor in lparcfg")
Cc: [email protected] # v5.13+
Signed-off-by: Laurent Dufour <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/pseries/setup.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -539,9 +539,10 @@ static void init_cpu_char_feature_flags(
* H_CPU_BEHAV_FAVOUR_SECURITY_H could be set only if
* H_CPU_BEHAV_FAVOUR_SECURITY is.
*/
- if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY))
+ if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY)) {
security_ftr_clear(SEC_FTR_FAVOUR_SECURITY);
- else if (result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY_H)
+ pseries_security_flavor = 0;
+ } else if (result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY_H)
pseries_security_flavor = 1;
else
pseries_security_flavor = 2;
On Mon, 16 Aug 2021 15:00:30 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.13.12 release.
> There are 151 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 Aug 2021 12:54:12 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.12-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.13.12-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
On 16.08.21 16:01, Greg Kroah-Hartman wrote:
> From: Mike Tipton <[email protected]>
>
> [ Upstream commit f84f5b6f72e68bbaeb850b58ac167e4a3a47532a ]
>
> We're only adding BCMs to the commit list in aggregate(), but there are
> cases where pre_aggregate() is called without subsequently calling
> aggregate(). In particular, in icc_sync_state() when a node with initial
> BW has zero requests. Since BCMs aren't added to the commit list in
> these cases, we don't actually send the zero BW request to HW. So the
> resources remain on unnecessarily.
>
> Add BCMs to the commit list in pre_aggregate() instead, which is always
> called even when there are no requests.
>
> Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
> Signed-off-by: Mike Tipton <[email protected]>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Georgi Djakov <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
Hello Greg and Sasha,
Please drop this patch from both 5.10 and 5.13 stable queues. It's
causing issues on some platforms and we are reverting in. Revert is
in linux-next already.
Thanks,
Georgi
On Mon, Aug 16, 2021 at 08:17:52PM +0300, Georgi Djakov wrote:
> On 16.08.21 16:01, Greg Kroah-Hartman wrote:
> > From: Mike Tipton <[email protected]>
> >
> > [ Upstream commit f84f5b6f72e68bbaeb850b58ac167e4a3a47532a ]
> >
> > We're only adding BCMs to the commit list in aggregate(), but there are
> > cases where pre_aggregate() is called without subsequently calling
> > aggregate(). In particular, in icc_sync_state() when a node with initial
> > BW has zero requests. Since BCMs aren't added to the commit list in
> > these cases, we don't actually send the zero BW request to HW. So the
> > resources remain on unnecessarily.
> >
> > Add BCMs to the commit list in pre_aggregate() instead, which is always
> > called even when there are no requests.
> >
> > Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
> > Signed-off-by: Mike Tipton <[email protected]>
> > Link: https://lore.kernel.org/r/[email protected]
> > Signed-off-by: Georgi Djakov <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
>
> Hello Greg and Sasha,
>
> Please drop this patch from both 5.10 and 5.13 stable queues. It's
> causing issues on some platforms and we are reverting in. Revert is
> in linux-next already.
Now dropped, thanks.
greg k-h
Hi Greg,
Looks like upstream commit b91b6b019fd ("ovl: fix deadlock in splice
write") needs to be added to linux-5.4.y.
The reason is that commit 82a763e61e2b ("ovl: simplify file splice")
was backported to v5.4.155, and the above commit fixes this.
Applies cleanly and I reviewed that the backport is correct.
Thanks,
Miklos
On Mon, Aug 16, 2021 at 3:13 PM Greg Kroah-Hartman
<[email protected]> wrote:
>
> From: Miklos Szeredi <[email protected]>
>
> [ Upstream commit 9b91b6b019fda817eb52f728eb9c79b3579760bc ]
>
> There's possibility of an ABBA deadlock in case of a splice write to an
> overlayfs file and a concurrent splice write to a corresponding real file.
>
> The call chain for splice to an overlay file:
>
> -> do_splice [takes sb_writers on overlay file]
> -> do_splice_from
> -> iter_file_splice_write [takes pipe->mutex]
> -> vfs_iter_write
> ...
> -> ovl_write_iter [takes sb_writers on real file]
>
> And the call chain for splice to a real file:
>
> -> do_splice [takes sb_writers on real file]
> -> do_splice_from
> -> iter_file_splice_write [takes pipe->mutex]
>
> Syzbot successfully bisected this to commit 82a763e61e2b ("ovl: simplify
> file splice").
>
> Fix by reverting the write part of the above commit and by adding missing
> bits from ovl_write_iter() into ovl_splice_write().
>
> Fixes: 82a763e61e2b ("ovl: simplify file splice")
> Reported-and-tested-by: [email protected]
> Signed-off-by: Miklos Szeredi <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> fs/overlayfs/file.c | 47 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 46 insertions(+), 1 deletion(-)
>
> diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
> index 4d53d3b7e5fe..d081faa55e83 100644
> --- a/fs/overlayfs/file.c
> +++ b/fs/overlayfs/file.c
> @@ -392,6 +392,51 @@ out_unlock:
> return ret;
> }
>
> +/*
> + * Calling iter_file_splice_write() directly from overlay's f_op may deadlock
> + * due to lock order inversion between pipe->mutex in iter_file_splice_write()
> + * and file_start_write(real.file) in ovl_write_iter().
> + *
> + * So do everything ovl_write_iter() does and call iter_file_splice_write() on
> + * the real file.
> + */
> +static ssize_t ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
> + loff_t *ppos, size_t len, unsigned int flags)
> +{
> + struct fd real;
> + const struct cred *old_cred;
> + struct inode *inode = file_inode(out);
> + struct inode *realinode = ovl_inode_real(inode);
> + ssize_t ret;
> +
> + inode_lock(inode);
> + /* Update mode */
> + ovl_copyattr(realinode, inode);
> + ret = file_remove_privs(out);
> + if (ret)
> + goto out_unlock;
> +
> + ret = ovl_real_fdget(out, &real);
> + if (ret)
> + goto out_unlock;
> +
> + old_cred = ovl_override_creds(inode->i_sb);
> + file_start_write(real.file);
> +
> + ret = iter_file_splice_write(pipe, real.file, ppos, len, flags);
> +
> + file_end_write(real.file);
> + /* Update size */
> + ovl_copyattr(realinode, inode);
> + revert_creds(old_cred);
> + fdput(real);
> +
> +out_unlock:
> + inode_unlock(inode);
> +
> + return ret;
> +}
> +
> static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
> {
> struct fd real;
> @@ -603,7 +648,7 @@ const struct file_operations ovl_file_operations = {
> .fadvise = ovl_fadvise,
> .flush = ovl_flush,
> .splice_read = generic_file_splice_read,
> - .splice_write = iter_file_splice_write,
> + .splice_write = ovl_splice_write,
>
> .copy_file_range = ovl_copy_file_range,
> .remap_file_range = ovl_remap_file_range,
> --
> 2.30.2
>
>
>
On Mon, Nov 15, 2021 at 02:54:35PM +0100, Miklos Szeredi wrote:
> Hi Greg,
>
> Looks like upstream commit b91b6b019fd ("ovl: fix deadlock in splice
> write") needs to be added to linux-5.4.y.
>
> The reason is that commit 82a763e61e2b ("ovl: simplify file splice")
> was backported to v5.4.155, and the above commit fixes this.
>
> Applies cleanly and I reviewed that the backport is correct.
Now queued up, thanks.
greg k-h