2020-02-25 07:34:56

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v1 0/3] Cleanup dtbs_check warnings for tsens

Make dtbs_check pass for tsens bits. I'm working on another series to
cleanup other DT warnings for QC platforms.

Amit Kucheria (3):
dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens
dt-bindings: thermal: tsens: Make dtbs_check pass for msm8916 tsens
dt-bindings: thermal: tsens: Make dtbs_check pass for msm8996 tsens

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
3 files changed, 4 insertions(+), 3 deletions(-)

--
2.20.1


2020-02-25 07:35:01

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v1 1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens

Fixes the following warnings:
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected

Signed-off-by: Amit Kucheria <[email protected]>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..13e294328932 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,sdm845-tsens
+ - qcom,sc7180-tsens
- const: qcom,tsens-v2

reg:
--
2.20.1

2020-02-25 07:35:08

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v1 2/3] dt-bindings: thermal: tsens: Make dtbs_check pass for msm8916 tsens

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']

Signed-off-by: Amit Kucheria <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9f31064f2374..1748ea3f4b4f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -860,7 +860,7 @@
};

tsens: thermal-sensor@4a9000 {
- compatible = "qcom,msm8916-tsens";
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
reg = <0x4a9000 0x1000>, /* TM */
<0x4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
--
2.20.1

2020-02-25 07:35:12

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v1 3/3] dt-bindings: thermal: tsens: Make dtbs_check pass for msm8996 tsens

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Signed-off-by: Amit Kucheria <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7ae082ea14ea..f157cd4f53b4 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -446,7 +446,7 @@
};

tsens0: thermal-sensor@4a9000 {
- compatible = "qcom,msm8996-tsens";
+ compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
reg = <0x004a9000 0x1000>, /* TM */
<0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
@@ -457,7 +457,7 @@
};

tsens1: thermal-sensor@4ad000 {
- compatible = "qcom,msm8996-tsens";
+ compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
reg = <0x004ad000 0x1000>, /* TM */
<0x004ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
--
2.20.1

2020-02-25 10:16:43

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v1 1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens

On 25-02-20, 13:01, Amit Kucheria wrote:
> Fixes the following warnings:
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

I think the patch title should be "add qcom,sc7180-tsens to qcom-tsens.yaml"

and it would be great to see explanation on how adding it fixes these
warns.

Relooking at series I think this applies to rest of the series too :)

Thanks


>
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
>
> Signed-off-by: Amit Kucheria <[email protected]>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index eef13b9446a8..13e294328932 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
> - qcom,msm8996-tsens
> - qcom,msm8998-tsens
> - qcom,sdm845-tsens
> + - qcom,sc7180-tsens
> - const: qcom,tsens-v2
>
> reg:
> --
> 2.20.1

--
~Vinod

2020-02-25 12:14:13

by Amit Kucheria

[permalink] [raw]
Subject: Re: [PATCH v1 1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens

On Tue, Feb 25, 2020 at 3:46 PM Vinod Koul <[email protected]> wrote:
>
> On 25-02-20, 13:01, Amit Kucheria wrote:
> > Fixes the following warnings:
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> > 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> > causes of the failure):
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> > ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> > ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> > ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> > builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> > thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
>
> I think the patch title should be "add qcom,sc7180-tsens to qcom-tsens.yaml"
>
> and it would be great to see explanation on how adding it fixes these
> warns.

Agreed. I'll send out a new version with the commit messages fixed.

> Relooking at series I think this applies to rest of the series too :)
>

Thanks for the review.